OIF SFI-5 40G Transponder Big Bear Networks OFC 2003
Dec 17, 2015
OIF SFI-5 40G Transponder
Big Bear NetworksOFC 2003
Big Bear designed all 40G ICs and packages (except mod driver)
Management &Control
Fiber Out
Fiber In
SFI-5To
SONETFramer
orFEC
Processor
Mod.Control
SFI-516:4Mux
SFI-5 1:16 DeMuxand
Clock & Data Recovery (CDR)
Limiting Amp
Transimpedance Amp
Photodiode
Optical Modulator
CWLaser
Modulator DriverCMU4:1Mux
Big Bear 40/43G Optical Transponder
40G Transponder Standards OIF SFI-5 and SXI-5
• 16 x 2.5Gb/s CML• 300pin MSA connector/pinout
ITU G.693 compliant (SR) / OIF VSR-5• 4dB link budget (2Km)
OC-768/STM-256 SONET/SDH and OTU-3
40G MSA mechanical and I2C• Footprint 5” x 7” x 0.65”
Big Bear 40G Performance Results
VSR-5 BER / Sensitivity
VSR-5 Long-Term BER Result
SFI-5 Eye Characteristics
G.693 Optical Eye-Mask
G.8251 Jitter Generation
G.8251 Jitter Tolerance
VSR-5 BER/Sensitivity Measurement Set-up
Trans-ponder
Eval. Board
Lightwave
Multimeter
OpticalSplitter
PCUSB
I2C
40 ps/nm
622 MHz Recovered Clock from CDR
Signal Generator622MHz 9dBm
(Agilent E4421B)
SplitterRF Splitter
SplitterRF Splitter
RXREF TXREF
Agilent ParBERT
OpticalAtten. OPTICAL
LOOP BACK
40G Sensitivity
1.00E-12
1.00E-11
1.00E-10
1.00E-09
1.00E-08
1.00E-07
1.00E-06
-12.0 -11.0 -10.0 -9.0 -8.0 -7.0 -6.0 -5.0 -4.0 -3.0
Optical Input Power (dBm)
BE
R
35C, VNom, 40G, 2km
35C, VNom, 40G, BTB
Expon. (35C, VNom,40G, 2km)Expon. (35C, VNom,40G, BTB)
Specs
Measured Spec
Back to Back -7.93 -5
2km -7.72 -4
Path Penalty 0.21 1
Error-Free Operation Over 15 Hours
SFI-5 231-1 PRBS input data
~2 km of fiber
-4dBm at Rx
35oC Case T
-6% power supplies
16 UI of wander applied to TxData & Deskew inputs
SFI-5 1:16 CDR/DeMux @ 40Gb/s
Data lock @ 40Gb/s, PRBS 231-1, with BER < 10-
15
Single Lane of Output Data at 2.488Gb/s
622 MHz Clock
SFI-5 CDR/Demux Eye Mask Measurements
SFI-5 Rx Eye mask tests over full temperature range
SFI-5 Tx interface performs robustly over all stress conditions
• Tested with skews of 20 UI applied
• Tested with 16 UI of wander applied to the ParBERT ref clock
10 C
70 C35 C
40G G.693 Optical Eye-mask Measurements
Eye measured against G.693 mask
1500 waveforms
(w/ optical plug-in)
35 C 70 C
12%
15%
10%
10 C
40G Jitter Generation Measurement Set-up
Agilent622.08
MHz clock source
PLL
Rohde & Swartz40 GHz
spectrumanalyzer.
4:1 /CMU
16:4 MD EA
Internal Sequence Generation
01010101010….
Wide Band20 kHz to 320 MHz
High Band16 MHz to 320 MHz
Units
Measured Specification Measured Specification
0.6 1.2 0.06 0.1 UI
15.3 30 1.55 2.5 ps
Very accurate measurement of random jitter (RJ) and deterministic jitter (DJ)
All jitter generation measurements well within specifications Sufficient margin for data dependent jitter contribution
EDFA
PD
Amp
Measured Jitter Tolerance: SFI-5 CDR/Demux & Limiting Amp
FMModulation
Mod
LO40 GHzSynthesizer
DC-320 MHzSynthesizer
Big Bear40 DataGen
Out
Clock
40G Data
DUTCDR/Demux
& LA
ParBERTMeasure
Oscilloscope
Big Bear Box
ITU technique requires at-speed linear phase detector - not available
0.1
1
10
100
0.001 0.01 0.1 1 10 100 1000
JITTER FREQUENCY (MHz)
PP
SIN
E J
ITT
ER
(U
I) G.8251 Tolerance Mask
CDR + LA
G.8251 Mask
SFI-5 CDR + LA
G.8251 Mask
SFI-5 CDR + LA
CDR+LA meets G.8251 Tolerance Mask with margin
OIF SFI-5 PLL Demo on Table 19
Agilent 81250
ParBERT
mu
x/ T
X
RX
/D
e-mu
x
Agilent86100DCA
electrical
optical
EDFA
Agilent81250
ParBERT
Big BearNetworks
Kodiak 40G SRTransponder
SFI-5 VSR-5
40G Transponder Summary Transponder meets all SFI-5, SXI-5 and VSR-5
Specifications (over full range of temperature and supply voltage)
Currently in production and shipping
For further details see the
Big Bear Networks’ representative at
the OIF Demonstration, Table 19