1 +1.562.906.9300 | www.agsecorp.com | [email protected]Fan Stator Module Shipping Stand for GE90-94B/-115B Fan Stators Engine OEM P/N: 9C6003P01-PPK AGSE P/N: AGSE-C106-G02 Propulsor Shipping Stand for GE90-94B/-115B Propulsors & Full Engines Engine OEM P/Ns: 9C6025P02 AGSE P/Ns: AGSE-E102-G02 Shipping Container for GE90-115B Fan Blades Engine OEM P/N: 9C6028P01 AGSE P/N: AGSE-C061-G01 For decades, AGSE has been a global leader in the original design, development, and manufacture of qualified & recommended solutions for the handling of the GE90 family of high-bypass turbofan engines: • Shipping Stands • Engine Covers • Lifting Fixtures • Shipping Containers • Site Transport OEM-APPROVED GSE & TOOLING FOR GE90 ENGINES USED ON BOEING 777 AIRCRAFT Approved by GE Aviation!
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Propulsor Shipping Stand for GE90-94B/-115B Propulsors & Full EnginesEngine OEM P/Ns: 9C6025P02AGSE P/Ns: AGSE-E102-G02
Shipping Container for GE90-115B Fan BladesEngine OEM P/N: 9C6028P01 AGSE P/N: AGSE-C061-G01
For decades, AGSE has been a global leader in the original design, development, and manufacture of qualified & recommended solutions for the handling of the GE90 family of high-bypass turbofan engines:
9C6032P01, 9C6032P03 (Pneumatic Tire Dollies)9C6030P01, AGSE-E167-G01 (Fan Case Transfer Dollies)
GE90-94B
9C6019P02 AM-2733-G02
GE90-115B Boeing 747, 767 & 777 Douglas DC-10 & MD-11
9C1104 (Propulsor Cover)
GE90-94B
8C2644P02† AGSE-E288-G01†
GE90-115BGround Shipment Only GE9X
GE90-94B
Approved, qualified, and recommended by GE Aviation for the handling of GE90 engines (unless denoted with a † ).
OEM-APPROVED FOR GE90 ENGINESSHIPPING STANDS
Propulsor Shipping Stands• Air/Truck Transport or Storage for propulsor (M20)*• Bootstrap Capable (with AGSE or alternate lifting
devices) to support engine during removal/installation from/on aircraft
• Tie-Down Rings on Transportation Base offer secure retainment for both engine & Shipping Stand
• Shock-Absorbing Mounts reduce vibrations during transport
• Compatible with Aft Engine Mount Position Fixture (9C1165) for additional retention during transport when aft flight mount & thrust braces are installed
• Select models:• Transport full engines (M10) on specialized large freighter aircraft*• Include optional Air-Operated Pneumatic Pump (-PPK)
to raise/lower Shipping Cradle
Fan Stator Shipping Stands• Air/Truck Transport or Storage for fan stator*• Manual Hydraulic Pump rotates Shipping Stand 90°
from vertical to horizontal positions & back• Palletized Base Frame enables loading/unloading
into/from aircraft• Tie-Down Rings offer secure retainment to
Truck Trailer as well as Shipping Stand rotation via overhead hoists
• 9C6003P01-PPK (AGSE-C106-G02) model includes Air-Operated Pneumatic Pump (-PPK) for Shipping Stand rotation
Our trusted & reliable Shipping Stands not only offer the lowest total cost of ownership, but superior functionality that
can benefit any airline, aircraft hangar, or engine shop:
*AGSE Shipping Stands are designed and built in compliance with the specifications and requirements of the engine’s original equipment manufacturer (OEM). The customer is solely responsible for selecting the appropriate packaging based upon all information at his/her disposal, including the specific application, regulatory compliances, product compatibility, shipping requirements, and documentation issued by the Engine OEM. Any AGSE-referenced shipping information presented either in this product literature or other AGSE documentation is intended as general guidance only and should not be considered a complete set of shipping requirements that can alter, satisfy, or influence both regulatory and Engine OEM shipping requirements. The content found in AGSE marketing materials and other documentation is subject to change; AGSE accepts no liability for loss or damage resulting from changes, errors, omissions, or misinterpretations of these AGSE publications.
FAN STATOR SHIPPING STANDS BY PART NUMBER Engine OEM
AGSE PART
NUMBER:FAN STATOR(S)
ACCOMMODATEDCAPABLE OF SHIPMENT ON MAIN DECK(S)
OF FREIGHTER AIRCRAFT*COMPATIBLE WITH OTHER AGSE EQUIPMENT:
SHIPPING CONTAINERS FAN CASE COVERS SITE TRANSPORT
FAN & ENGINE TOOLINGImprove safety & productivity for both engine and major module maintenance!
PART NUMBER: Engine OEM DESCRIPTION ENGINE(S) ACCOMMODATED CONSISTS OF: SPECIFIC FUNCTION
9C1277 Fan Stator Module/Fan Hub Guide Pin Set
GE90-115BEight {8} Steel Guide Pins Aligns holes in Fan Outlet Guide Vanes with holes in Fan Hub
GE90-94B
9C6014 Fan Inlet Personnel StandGE90-115B
Three {3} Wooden Platforms Enables removal/installation of Fan Stator from/on Propulsor by providing a flat, elevated surface to access upper bolts & acoustic panelsGE90-94B
9C3013 Fan Forward Acoustic Liner-Protector GE90-115B One {1} Fiberglass Acoustic Liner Protector with connecting hardware Protects Forward-Outer Acoustic Liners when personnel stand in inlet of Fan Stator
2886 Starter Service Kit GE90-115B• 5-Liter Drain Bottle • Drain Hose • Fill Hose
• Re-Oiling Pump • Shipping/Storage Case Provides clean oil filling & drainage during removal/installation of engine starters
Approved, qualified, and recommended by GE Aviation for the handling of GE90 engines.