192 Trans. of the Korean Hydrogen and New Energy Society(2015. 4), Vol. 26, No. 2, pp. 192~198 DOI: http://dx.doi.org/10.7316/KHNES.2015.26.2.192 ISSN 1738-7264 eISSN 2288-7407 천연가스 압축기 설계 단계에서 FTA를 이용한 수명 예측 연구 한용식 1† ㆍ도규형 1 ㆍ김태훈 1 ㆍ김명배 1 ㆍ최병일 1 1 한국기계연구원 The Study on the Lifetime Estimation using Fault Tree Analysis in Design Process of LNG Compressor YONGSHIK HAN 1† , KYU HYUNG DO 1 , TAEHOON KIM 1 , MYUNGBAE KIM 1 , BYUNGIL CHOI 1 1 Korea Institute of Machinery and Materials, Jang-dong Yuseong-gu, Daejeon-Si, 305-343, Korea Abstract >> Fault Tree Analysis to predict the lifetime in the design process of LNG compressor is considered. Fault Trees for P & ID of the compressor are created. Individual components that comprise the compressor are configured with the basic event. The failure rates in the PDS and OREDA are applied. As results, the system failure rate and the reliability over time are obtained. Further, the power transmission and the shaft seal system is confirmed to confidentially importantly contribute to the overall lifetime of the system. These techniques will help to improve the reliability of design of large scale machinery such as a plant. Key words : Fault Tree Analysis(고장트리해석), Lifetime estimation(수명예측), Failure rate(고장율), Compressor (압축기), LNG(천연액화가스) † Corresponding author : [email protected]Received : 2015.03.19 in revised form: 2015.04.27 Accepted : 2015.04.30 Copyright ⓒ 2015 KHNES Nomenclature MTBF : Mean Time Between Failure MTTF : Mean Time To Failure 1. 서 론 대형 압축기, 가스터빈 등의 대형 플랜트를 신규 로 개발하고자 하는 경우, 개발 시작 단계에서부터 수명의 설계 목표 값 예측과 운영 시 발생 가능한 고 장 및 유지보수에 대한 문제점들을 예측해야 할 뿐 만 아니라 개발될 기계시스템의 신뢰성을 확보하는 것은 대단히 중요한 사항이다. 그러나 개발사례가 부 족하고 시스템의 신뢰성 정보가 영업적 비밀에 속하 기 때문에 공개된 자료가 매우 부족한 실정이다. 특 히, 우리나라의 경우 대형 플랜트용 기자재의 개발에 있어 후발 주자이기 때문에 시장진입에 있어 선진 기업들의 견제가 매우 심한 형편이다. 신규 장비의 수명예측 기법은 개발단계에서나 유 지보수 단계에서 많은 적용 가능한 방법론이 있지만 신뢰도가 높은 고장과 관련된 자료의 부족으로 대부 분은 상세설계 단계에서 적용이 이루어지고 있는 실 정이다. 개발하고자 하는 BOG(Boil Off Gas)용 압축기는 LNG 인수기지에서 하절기에 주로 발생하는 BOG를
7
Embed
천연가스 압축기 설계 단계에서 FTA를 이용한 수명 예측 ... - Hydrogentjournal.hydrogen.or.kr/upload/papers/742676272_032bed8e... · 2017. 5. 23. · YONGSHIK HAN1†,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
192
Trans. of the Korean Hydrogen and New Energy Society(2015. 4), Vol. 26, No. 2, pp. 192~198DOI: http://dx.doi.org/10.7316/KHNES.2015.26.2.192
ISSN 1738-7264
eISSN 2288-7407
천연가스 압축기 설계 단계에서 FTA를 이용한 수명 예측 연구한용식1†ㆍ도규형1ㆍ김태훈1ㆍ김명배1ㆍ최병일1
1한국기계연구원
The Study on the Lifetime Estimation using Fault Tree Analysis in Design Process of LNG Compressor
1Korea Institute of Machinery and Materials, Jang-dong Yuseong-gu, Daejeon-Si, 305-343, Korea
Abstract >> Fault Tree Analysis to predict the lifetime in the design process of LNG compressor is considered.Fault Trees for P & ID of the compressor are created. Individual components that comprise the compressor areconfigured with the basic event. The failure rates in the PDS and OREDA are applied. As results, the system failure rate and the reliability over time are obtained. Further, the power transmission and the shaft seal systemis confirmed to confidentially importantly contribute to the overall lifetime of the system. These techniques willhelp to improve the reliability of design of large scale machinery such as a plant.
Key words : Fault Tree Analysis(고장트리해석), Lifetime estimation(수명예측), Failure rate(고장율), Compressor(압축기), LNG(천연액화가스)