2018. 10 Ver.1 SINUSLIFT REPAIR GBR R Neobiotech SINUSLIFT / REPAIR / GBR SinusAll Kit / SCA Kit / SLA Kit FR Kit / SR Kit / GBR Kit / EZ GBR Kit GBR Component Cti-mem / Ti-Mesh / ACM
2018. 10 Ver.1
SINU
SLIFT REPAIR GBR
R GBR
NeobiotechSINUSLIF T / REPAIR / GBRSinusAll Kit / SCA Kit / SLA KitFR Kit / SR Kit / GBR Kit / EZ GBR Kit GBR ComponentCti-mem / Ti-Mesh / ACM
Contents
GBR Solution GBR Kit 24
EZ-GBR Kit 27
GBR Component 32
CTi-mem 34
Ti-Mesh 39
ACM 40
Repair Solution FR Kit 16
SR Kit 19
Sinus Lift Solution SinusAll Kit 4
SCA Kit 9
SLA Kit 12
SinusAll KitSCA Kit · SLA KitFR Kit · SR KitGBR Kit · EZ GBR Kit · GBR ComponentCti-memTi-MeshACM
Sinus LiftRepairGBR Solution
Sinus Lift Solution4 5 Sinus Solution
Sinus Lift Solution
SinusAll Kit SinusAll Kit (Crestal Approach Tool Components)
• Surgical Drill
Stopper Fixture DriverC-Reamer LS-Reamer
Drill HandleHex Driver
Aqua Tap
Side Cutter
Sinus Elevator
Aqua System
Surgical Drill
Rotary Elevator
S-ReamerDepth gauge
Bone Carrier
Bone condenser
Lateral Stopper
• Product Code : SAKIT
* 1,200rpm
Diameter(Ø) Ø2.2 Ø2.8 Ø3.2 Ø3.7 Ø4.0
Product Name SAD22 SAD28 SAD32 SAD37 SAD40
• S-Reamer
Diameter(Ø) Product Name
Ø2.8 SASR28
Ø3.2 SASR32
Ø3.6 SASR36
Ø3.9 SASR39
* 1,200rpmØ2.8 Ø3.2 Ø3.6 Ø3.9
Misaligned case Septum
BoneDisk
• Rotary elevator
Diameter(Ø) Product Name
Ø2.8 SARE28
Ø3.2 SARE32
Ø3.6 SARE36
Ø3.9 SARE39
* 80rpmØ2.8 Ø3.2 Ø3.6 Ø3.9
Length 1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm
Product Name CDS010 CDS020 CDS030 CDS040 CDS050 CDS060 CDS070 CDS080 CDS090 CDS100 CDS110 CDS120
• Stopper
Length
0.2mm
• Depth gauge
Product Name
SADG01
Ø2.6
Ø3.1
1 2 3 4 5 6 7 8 9 10 11 12
12.011.010.0
9.08.07.06.05.04.03.02.01.0
0.2
The SinusAll Kit combines NeoBiotech’s SCA (Sinus Crestal Approach) Kit, SLA (Sinus Lateral Approach) Kit, and the Surgical Kit into a single kit. The product allows maxillary sinus implant procedures to take place using a single kit, rather than having to prepare a sinus kit and a surgical kit separately.
Sinus Lift Solution6 7 Sinus Solution
Sinus Lift Solution
• Bone carrier
Product Name
JUMB02
• Bone condenser
Product Name
SABC01
Ø1.5
Ø2.2
Product Name
AQT
• Aqua system (Aqua Tap)
• Aqua system (Aqua Valve, Hose, Syringe (Set))
Product Name
AQSTHoseAuqa Value
Syringe
• Drill Handle
Product Name
SADH01
SinusAll Kit (Crestal Approach Tool Components) SinusAll Kit (Lateral Approach Tool Components)
• LS-Reamer
Ø6.5
Ø6.5
• C-Guide Reamer & C-Reamer
Product Name
SACG610
Product Name
SALS640
* 2,000rpm(20:1) / 5,000rpm(1:1)
• Side cutter
Product Name
SCT30
Ø6.5
Product Name
SAC640
* 2,000rpm(20:1) 5,000rpm(1:1)
• Sinus Elevator
Product Name
SLE01
Product Name
SLE02
Product Name
SLE03
A B
* 1,200rpm
<Window extend>
Length 1mm 2mm 3mm 4mm
Product Name LTS010 LTS020 LTS030 LTS040
• Lateral stopper
A : 0.7mmB : LengthC : 1.5mm
A : Stopper Length
Ø3.0
Sinus Lift Solution8 9 Sinus Solution
Sinus Lift Solution
SinusAll Kit (Implant Placement Tool Components)
• Fixture driver (IS Type)
Length Product Name
Ratchet (Short) ISFD10R
Ratchet (Long) ISFD15R
Contra Angle ISFD05C
Short Long
• Torque wrench
Product Name
TW60
Product Name
HD1215S
• Hex driver
Hex 1.2
15mm
SCA Kit (Sinus Crestal Approach Kit)
• Initial Drill
• S-Reamer
S-ReamerStopper
Spiral Bone Inserter
Depth Gauge
• Product Code : SCAKITBone Spreader Initial Drill Bone Condenser Bone Carrier
Diameter(Ø) Product Name
Ø2.4 ICR24
Ø2.8 ICR28
Ø3.2 ICR32
Ø3.6 ICR36
* 1,200rpmØ2.4 Ø2.8 Ø3.2 Ø3.6
Diameter(Ø) Product Name
Ø2.0 SSD20
* 1,200rpm
Ø2.4 Ø2.8 Ø3.2 Ø3.6
SCA Kit is a drilling tool on the inferior cortical bone without tearing of membrane and make a perforation on the inferior cortical bone without malleting osteotome technique Therefore User can get CMI Fixation. (Initial Fixation in Crest cortical bone, Middle cancellous bone and Inferior cortical bone)
Sinus Lift Solution10 11 Sinus Solution
Sinus Lift Solution
Diameter(Ø) Product Name
Ø2.7 SBS20
Ø3.1 SBS30
* 80rpm
Length 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm
Product Name SKS02 SKS03 SKS04 SKS05 SKS06 SKS07 SKS08 SKS09 SKS10 SKS11
• Stopper
Product Name
SDG00
SCA Kit (Sinus Crestal Approach Kit)
• Depth Gauge
• Bone carrier
Product Name
JUMB02
• Bone Condenser
Product Name
SBC01
• Bone Inserter • Bone Spreader
* 80rpm
Product Name
SBI27
Dia.
12mm9mm6mm3mm
SCA Kit (Sinus Crestal Approach Kit)
• Sinus Crestal Approach Kit Intended use• Sinus Crestal Approach Kit Intended use
Drilling· Make drills 1mm shorter than measured
height of residual bone. Drill only 1mm more in each step by step using 1mm lon-ger stopper before the final drilling.
Bone carrier· Carry the bone grafting materials into os-
teotome site.· One time insertion capacity 0.05cc.· To make 1mm graft height, 0.1cc is needed.
Bone spreader· Spreading the bone and reduce pressure
in sinus area. 80rpm speed.· Use bone spreader at least after inserting
the bone more than 2 times.
Check perforation· Using Depth Gauge, check whether be-
ing perforated. Then, hang on the end of depth gauge in sinus wall inside. And check whether the tip side of gauge is hung on the interior wall.
Bone inserter· Push the bone into sinus after inserting the
bone into a hole with bone carrier.· Can be safely used with 1mm long stop-
per. 80rpm speed.
Using S-reamer· For safety, select a proper Sreamer in di-
ameter and 1mm shorter than measured height of remained bone. And make drills.
· If the sinus inferior cortical wall doesn’t perforate until the stopper reaches to the crestal bone, change 1mm longer size stopper and drilling continuously.
· You can feel perforating in inferior cortical wall.
Bone condenser· Push and keep the graft materials in place
on the floor of the sinus through the os-teotome site.
Final Drilling & Implantation· Do a Final Drilling· Based on the density of Crestal cortical
bone, the Countersink should be done (Except IT Type of Fixture). Generally, it should be done for D1-D2 bone. But, in case of below of D3 bone, it is Okay to skip according to the decision of dentist.
· After finishing a whole of drilling, do a im-plantation.
1 32
7 8
54 6
Sinus Lift Solution12 13 Sinus Solution
Sinus Lift Solution
SLA Kit (Sinus Lateral Approach Kit)
• Product Code : SLAKIT
• LS-reamer
• Sinus Elevator
Product Name
SLE05
Product Name
SLE02
Product Name
SLE03
<Elevator 1>
<Elevator 2>
<Elevator 3>
Elevator
C-Guide LS-reamerC-reamer
SLA Kit (Sinus Lateral Approach Kit)
* SPEED - 1:1 contra angle -5,000RPM / 1:20 contra angle-2,000RPM
Length 2.0mm 2.0mm 2.0mm 3.5mm 3.5mm 3.5mm
Diameter(Ø) Ø5.5 Ø6.5 Ø7.5 Ø5.5 Ø6.5 Ø7.5
Product Name LS520 LS620 LS720 LS535 LS635 LS735
* SPEED - 1:1 contra angle - 5,000RPM / 1:20 contra angle - 2,000RPM
Length 1.0mm 1.0mm 1.0mm 2.0mm 2.0mm 2.0mm 3.5mm 3.5mm 3.5mm
Diameter(Ø) Ø5.5 Ø6.5 Ø7.5 Ø5.5 Ø6.5 Ø7.5 Ø5.5 Ø6.5 Ø7.5
Product Name SCG510 SCG610 SCG710 LC520 LC620 LC720 LC535 LC635 LC735
• C-Reamer & C-Guide Reamer
Lateral window technique is the formation of the access to the maxillary sinus through its lateral wall. The process using this tool is simpler and much comfortable than any other techniques. Above all, this surgical kit provides ultimate solutions for the cases of only having with a thin residual bone height which is diffi cult to approach with a crestal technique, membrane rupture by a sinus crestal approach or placing a multiple implants. In addition, SLA reamers can be easily adapted for the case of formation of minimum fl ap size on the inferior wall.
C-ReamerC-Guide Reamer
Sinus Lift Solution14 15 Sinus Solution
Sinus Lift Solution
SLA Kit (Sinus Lateral Approach Kit)
• Sinus Lateral Approach Kit Technique Guide
SLA Kit (Sinus Lateral Approach Kit)
• Sinus Lateral Approach Kit Technique Guide
Flap· Open the soft tissue.
LS-Reamer· FMake a lateral hole with the LSreamer.· Keep the drill upright and maintain a steady
drilling motion; Both sides of the LS-reamer blade should be in contact with the bone while drilling.
· Continue drilling.· Speed : 2,000rpm· NOTE : C-Reamer can be used instead of
the LS-Reamer if you wish to save a circular bone core disk from the lateral wall.
Elevate sinus membrane· #2 elevator is used for detaching the mem-
brane in the inferior area.· #3 elevator is used for the anterior and pos-
terior areas.
Bone graft· Place bone graft material.· Cover the lateral hole with a collagen mem-
brane.· Suture the soft tissue.
Bone Disk· The LS reamer will leave a thin bone disk.
Detach sinus membrane· #1 elevator is used to initiate detachment
of the membrane in the mesial-distal area.
1 32
54 6
Repair Solution16
Repair Solution
Repair Solution 17
FR Kit (Fixture Remover Kit)
• Product Code : FRKIT
Fixture Remover FR Screw Hex Driver Torque Control Device
Fixture Remover Screw
Length Product Name
7mm HDF1607
12mm HDF1612
17mm HDF1617
• FR Screw Hex Driver
• Fixture Remover Screw
Screw size Product Name
M1.4 FRS14
M1.6 FRS16
M1.8 FRS18
1-72UNF FRS172
M2.0 FRS20
M2.5 FRS25
* “M” means a metric screw, and the number stands for the size of the external diameter of the screw
7mm 12mm 17mm
FR Screw Hex Driver(17mm)
Fixture Remover
Fixture Remover Screw
• Fixture Remover
Type Length Product Name
Narrow15mm FR315
20mm FR320
Regular15mm FR415
20mm FR420
Wide (Ø5)15mm FR515
20mm FR520
Wide (Ø6~8)15mm FR615
20mm FR620
ClampingForce
ClampingForce
Type Product Name
Body TW80400
Slider FRCHT
• Torque Control Device
This product is a surgical tool designed to remove implants that were stopped during the implantation due to excessive torque or implants whose surrounding bones have been damaged. After removing the implant, a new implant with the same diameter can be immediately implanted.
Body
Slider
Repair Solution18
Repair Solution
Repair Solution 19
FR Kit (Fixture Remover Kit) SR Kit (Screw Remover Kit)
• Product Code : SRKIT-ll
External Guide
Internal Guide
Conical Guide
Claw Perfect Guide Reverse Drill Screw Remover SR Driver Holder
Shank Driver PG Hand Driver
• Drill
Fractured Screw size Product Name
M1.6 CD16
M1.8 CD18
M2.0 CD20
M2.5 CD25
Reverse
Claw
• Reverse Drill
FracturedScrew size Diameter(Ø) Product Name
M1.8 Ø1.0 RCD10
M2.0 Ø1.2 RCD12
M2.5 Ø1.4 RCD14
* For M1.6 Size Screw, use the claw for removal / 2,000 rpm
This product is a surgical tool developed in order safely and quickly to remove screws that have become fractured inside an implanted Fixture for various reasons. After removing the Screw, a new Abutment may be connected to the Fixture.
• Fixture Remover Kit Technique Guide
1
3
2
4
Failed implant· Completely remove the prosthesis of the implant that needs to be
removed.
Fixture Remover· Select an appropriate size of Fixture Remover· Connect the selected Fixture Remover and tighten it counterclock-
wise until it is completely tightened to the Fixture Remover Screw that is fixed in the implant.
· Using a Torque Wrench, further apply torque to the Fixture Remover (counterclockwise) until the implant is finally unscrewed from the site.
Fixture Remover Screw· Select an appropriate size of Fixture Remover Screw· Connect the Fixture Remover Screw to the FR Screw Hex Driver and
tighten it clockwise.
Clear
* 80rpm
Repair Solution20
Repair Solution
Repair Solution 21
• Screw Remover
FracturedScrew size Diameter(Ø) Product Name
M1.8 Ø1.0 SR10
M2.0 Ø1.2 SR12
M2.5 Ø1.4 SR14
* At or below 80 rpmScrew Remover
Reverse
Applicable Products Standard Product Name
Screw Remover (SR10, SR12,
SR14)
for Handor
RatchetSHD00
• Shank Driver
Shank Driver
ClawScrew Remover
• Perfect Guide & PG Hand Driver
Applicable Products Standard Product Name
Screw Remover(PG1018, PG1220, PG1425)
2.5Hex PGHD25SS
Applicable Revers Drill
Fractured Screw size Diameter(Ø) Product
Name
RCD10 M1.8 Ø1.0 PG1018
RCD10 RCD12 M1.8, M2.0 Ø1.2 PG1220
RCD12 RCD14 M2.0, M2.5 Ø1.4 PG1425
<Perfect Guide>
<PG Hand Driver>
PG Hand Driver
Perfect Guide
SR Kit (Screw Remover Kit) SR Kit (Screw Remover Kit)
• Conical, Internal, External Guide
<Conical Guide>
Applicable Products Standard Product Name
Having 11° / 8° Internal Fixture 11° / 8° CG00
<Internal Guide>
Applicable fi xture Standard Product Name
Having 2.4Hex InternalConnection Fixture 2.4Hex IHG24
M2.0 Having 2.5Hex Interna Connection Fixture 2.5Hex IHG25
Having 3.1Octa InternalConnection Fixture 3.1Octa IOG31
<External Guide>
Applicable fi xture Standard Product Name
Having 2.4Hex ExternalConnection Fixture 2.4Hex EHG24
Having 2.7Hex ExternalConnection Fixture 2.7Hex EHG27
Having 3.4Hex ExternalConnection Fixture 3.4Hex EHG34
Applicable fi xture Standard Product Name
Conical Guide : CG00
2.4Hex GH00Internal Guide : IHG24, IHG25, IOG31
External Guide : EHG24, EHG27, EHG34
• SR Driver Holder
Guide
SR Driver Holder(3.5Double Hex)
• Thread Former - This instrument aim to restore the thread inside of damaged fixture.- Not Included
Thread Spec. Product Name
M1.6 * 0.35P TF16
M1.8 * 0.35P TF18
M2.0 * 0.4P TF20
M2.5 * 0.45P TF25
Repair Solution22
Repair Solution
Repair Solution 23
SR Kit (Screw Remover Kit)
• Screw Remover Kit Technique Guide
Reverse Drill· Select an appropriate size of Reverse Drill and connect it to the con-
tra angle of the surgical engine.· Insert the Reverse Drill into the Perfect Guide attached on the fixture.· By drilling counterclockwise at a speed of approximately 2000rpm,
drill 1~2mm into the surface of the fractured screw.· Check the marking line (in 1mm intervals) of the Drill body while
drilling with adequate irrigation.
Screw Remover· Remove the Perfect guide connected to the Fixture· Select a Screw Remover that fits to the hole created by the Reverse
Drill.· Connect the Screw Remover to the contra angle of surgical engine
and drill slowly (less than 80rpm) while pressing down with enough force to remove the fractured screw.
Fractured screw Perfect Guide· Select an appropriate size of Perfect Guide· By using the PG Hand Driver, tighten the Perfect Guide to the Fix-
ture in a clockwise direction until it touches the screw inside the fixture.
1
3
2
4
GBR Solution24
GBR Solution
GBR Solution 25
GBR Kit
• Product Code : GBRKIT
Stopper Tent Screw IS CTi SpacerRachet Connector Dual Hex Driver(Contra Angle)
Phillips Head DriverScrew Fixation Drill Driver Handle
1.2 Hex Driver
Dual Hex Driver(Handle)
Fixing Screw
Cover Screw
• Screw Fixation Drill
Diameter(Ø) Product Name
Ø1.0 SFD10
Ø1.3 SFD13
Ø1.5 SFD15
• Screw Fixation Drill Stopper
Drilling Depth Product Name
3mm SFDS030
5mm SFDS050
7mm SFDS070
GBR Kit
• Driver Handle
• Hex Hand Driver
Fixing Screw
• Dual Hex Driver
Type Length(L) Product Name
Contra Angle10mm DHDC10
20mm DHDC20
Ratchet 15mm DHDR15S
Contra Angle Ratchet
Product Name
DRH
• GBR Ratchet Connector
Length(L) Product Name
15mm GRC15
DualHex Driver
Philips HeadScrew Driver
Length(L) Hex Size Product Name
15mm Hex 1.2 HDH1215S15mm
Hex
• Philips Head Screw Driver
Length(L) Product Name
5mm PHSD05
10mm PHSD10
20mm PHSD20
GBR Kit is a surgical tool used for oral bone grafting onto areas in which there are defects in autogenous bones. It consists of surgical tool components that can affi x membranes.
Hex1.6(Tent Screw, CTi-Spacer)Hex1.0(CTi-Cover Screw)
TentScrew
CTi-Cover Screw
GBR Solution26
GBR Solution
GBR Solution 27
GBR Kit
• GBR KIT Technique Guide EZ-HandleConnector EZ-Break DriverDriver Handle
GBR RatchetConnector
EZ-ScrewFixation Drill
Phillips HeadScrew Driver
EZ-Screw FixationDrill Stopper
Dual Hex Driver
EZ-Phillips HeadDriver
EZ-Ti-Mem PushDriver
EZ-Cover CapDriver
• Product Code : EZGBRKIT
• EZ-Screw Fixation Drill
Length(L) Product Name
5mm EZSFDS050
• Screw Fixation Drill Stopper
Diameter(Ø) Product Name
Ø1.0 / Ø1.7 EZSFD17
EZ-GBR KitEZ-GBR Kit is a surgical tool used for oral bone grafting onto areas in which there are defects in autogenous bones. It consists of surgical tool components that can affi x membranes.
Drilling· Connect a stopper to the drill· Drill at least 3mm deep depending on the
bone density.
1
Tent Screw· Insert Tent Screw while leaving space for
augmentation.· Insert at least 3mm deep or more and obtain
15~25Ncm initial stability. Tent Screw may be fractured when torque is over 30Ncm.
2CTi-mem & Fixing Screw
· Place the Fixing Screws in the Fixing Holes (20~25Ncm)
· Using a sharp instrument, create a hole on the CTi-mem where the Tent Screw is lo-cated to allow the Cover Screw to be con-nected afterwards.
3
Bone Graft· Before bone graft, connect the Cover Screw
onto the Tent Screw to prevent bone mate-rials from entering inside.
· At this time, check if the location of the hole on the CTi-mem matches with the Cover Screw.
4Cover Screw
· Remove the cover screw.· Fixate CTi-mem to the Tent Screw by re-
connecting the Cover Screw above the CTi-mem. (10~15Ncm)
· Fixate the remaining parts of the CTi-mem so that grafted bones can be stably fixed.
· Cover the CTi-mem with soft tissue
5
GBR Solution28
GBR Solution
GBR Solution 29
EZ-GBR Kit
• EZ-Handle Connector
Length(L) Product Name
12mm EZHC12
• GBR Ratchet Connector
Length(L) Product Name
15mm GRC15
• Driver Handle
Product Name
DRH
• Philips Head Screw Driver
Length(L) Product Name
5mm PHSD05
10mm PHSD10
20mm PHSD20
• EZ-Break Driver
Diameter(Ø) Product Name
Ø3.2 EZBRD
Break
• Dual Hex Driver
EZ-GBR Kit
Length(L) Product Name
10mm DHDC10
20mm DHDC20
• EZ-Philips Head Driver
Length(L) Product Name
2mm EZPHD3502
12mm EZPHD3512
20mm EZPHD3520
EZ- PhilipsHead Driver
EZ-Fixing Screw
• EZ-Ti-Mem Push Driver
Product Name
EZPD68
Diameter(Ø) Product Name
Ø4.2 EZCCD42
• EZ-Cover Cap Driver
Removeby rotatingclockwise
GBR Solution30
GBR Solution
GBR Solution 31
EZ-GBR Kit
• EZ-GBR Kit Technique Guide
EZ-Fixing Screw· To secure enough space for bone forma-
tion, place EZ-Fixing Screw on the bone defect area.
1Bone Graft & Cti-mem
· Fill bone materials up to the height of the EZ-Fixing screw, and position an appropri-ate type of CTi-mem.
2
EZ-TI-Mem Push Driver· Fixate membrane by pressing down the
EZ-Ti-Mem Push Driver to the conical part of the EZ-Fixing Screw.
3
EZ-Cover Cap Driver· Additionally fixate membrane by plac-
ing the EZ-Cover Cap onto the EZ-Fixing Screw using the EZ-Cover Cap Driver.
4EZ-Break Driver
· Use EZ-Break Driver to remove the conical part of the EZ-Fixing Screw by rotating it in a clockwise direction.
5Fixing Screw
· If necessary, make an additional fixation by using fixing screws.
· After adapting Cti-mem to surrounding part of tissue, cover the Cti-mem with soft tissue.
6
GBR Solution32
GBR Solution
GBR Solution 33
GBR Components *Optional
• Universal Spacer
Length
Dia.
- Dual Hex Driver (DHDC10 / DHDC20) is required to use Universal Spacer.- Cover Screw – 1.0 hex / Universal Spacer – 1.6 hex
GBR Components *Optional
• Tent Screw
Length(L) Product Name
7mm CTS2007
10mm CTS2010
13mm CTS2013
15mm CTS2015
Set / Consists of 2 each per Length, total 8EA CTSSET02
• Fixing Screw
Length(L) Product Name
3mm MFS1603
5mm MFS1605
7mm MFS1607
Set / Consists of 4 each per Length, total 12EA MFSSET01
• EZ-Fixing Screw
Length(L) Product Name
3mm EZFS1703C
5mm EZFS1705C
7mm EZFS1707C
10mm EZFS1710C
13mm EZFS1713C
15mm EZFS1715C
EZ-Fixing Spacer
Length(L) Product Name
1.0mm ISEZFS3410S
1.5mm ISEZFS3415S
2.0mm ISEZFS3420S
* Disposable
* Disposable
* Disposable
* DisposableØ3.43
Cuff
Diameter(Ø)(Screw Size) Screw Size Length Product Name Compatibility
Ø4.0 M2.0
0.5mm * UVCSP2005 - Neobiotech IS System- OSSTEM TS - Megagen EZ Plus RP- Warantec Oneplant- Astra Large- Nobel Active RP
1.0mm * UVCSP2010
1.5mm * UVCSP2015
2.0mm * UVCSP2020
* Disposable / * For Neobiotech IS Type
GBR Solution34
GBR Solution
GBR Solution 35
• Tent Screw Type
• EZ-Fixing Screw Type
Ø1.25
Ø0.7
Ø0.4
R Type CTi-mem
Thickness : 0.12mm
Ø2.5
Ø1.25
EZ Type CTi-mem
Thickness : 0.12mm
CTi-mem
• RA Type
P
L
L
P(mm)(Proximal Width)
W(mm)(Buccal Width)
L(mm)(Buccal Length) TYPE Product Name
4 8 6 RA1 RATMB0810F
4 10 8 RA2 RATMB0912F
4 10 11 RA3 RATMB0915F
* Disposable / Thickness : 0.12mm
* Disposable / Thickness : 0.12mm
W
• EZA Type
P
P(mm)(Proximal Width)
W(mm)(Buccal Width)
L(mm)(Buccal Length) TYPE Product Name
4 8 6 EZA1 EZTM0810A1
4 10 8 EZA2 EZTM0912A2
4 10 11 EZA3 EZTM0915A3
W
CTi-memNew Concept of Titanium Membrane, Customized Ti Membrane
RC Type EZC Type
RE Type RT TypeRB Type EZB Type
RA Type EZA Type
Three Wall AugmetationBone defect in Buccal, Proximal, Lingual area
One Wall AugmetationBone defect in Buccal area
Two Wall AugmetationBone defect in Buccal, Proximal area
Non-fixed SubmergedBone defect in large area
GBR Solution36
GBR Solution
GBR Solution 37
• RB Type
P
P
L
L
P(mm)(Proximal Width)
W(mm)(Buccal Width)
L(mm)(Buccal Length) TYPE Product Name
10 12
5 RB4 RPTMB1210SF
7 RB5 RPTMB1212SF
10 RB6 RPTMB1215SF
W
• EZB Type
P(mm)(Proximal Width)
W(mm)(Buccal Width)
L(mm)(Buccal Length) TYPE Product Name
10 12
5 EZB4 EZTM1210B4
7 EZB5 EZTM1212B5
10 EZB6 EZTM1215B6
W
CTi-mem
• RC Type
P
L
P(mm)(Proximal Width)
W(mm)(Buccal Width)
L(mm)(Buccal Length) TYPE Product Name
7 9
6 RC1 RPTML0910F
8 RC2 RPTML0912F
11 RC3 RPTML0915F
10 12
5 RC4 RPTML1210SF
7 RC5 RPTML1212SF
10 RC6 RPTML1215SF
12 12
5 RC7 RPTML1210LF
7 RC8 RPTML1212LF
10 RC9 RPTML1215LF
W
• EZC Type
P(mm)(Proximal Width)
W(mm)(Buccal Width)
L(mm)(Buccal Length) TYPE Product Name
7 9
6 EZC1 EZTM0910C1
8 EZC2 EZTM0912C2
11 EZC3 EZTM0915C3
10 12
5 EZC4 EZTM1210C4
7 EZC5 EZTM1212C5
10 EZC6 EZTM1215C6
12 12
5 EZC7 EZTM1210C7
7 EZC8 EZTM1212C8
10 EZC9 EZTM1215C9
W
CTi-mem
* Disposable / Thickness : 0.12mm
* Disposable / Thickness : 0.12mm
* Disposable / Thickness : 0.12mm
* Disposable / Thickness : 0.12mm
P
L
GBR Solution38
GBR Solution
GBR Solution 39
• RE Type
P
L
P(mm)(Proximal Width)
L(mm)(Length ) TYPE Product Name
12 15 RE1 RCTM1215
12 20 RE2 RCTM1220
15 25 RE3 RCTM1525
* Disposable / Thickness : 0.12mm
• RT Type
P
L
V(mm)(Vertical)
H(mm)(Horizontal) TYPE Product Name
12 20 RT1 RTMN1220125
20 25 RT2 RTMN2025125
25 35 RT3 RTMN2535125
35 50 RT4 RTMN3550125
* Disposable / Thickness : 0.12mm
* Disposable / Thickness : 0.085mm
CTi-mem
• Type Of Ti-mesh
Size(mm) TYPE Product Name
20 x 12 T1 TMN 122008
25 x 20 T2 TMN 202508
35 x 25 T3 TMN 253508
50 x 35 T4 TMN 355008
20mm
12mm
35mm
25 mm
* Disposable / Thickness : 0.085mm
25mm
20mm
50mm
35 mm
Ti-Mesh
GBR Solution40
14mm
Diameter
Diameter(Ø) Product Name
Ø4.0 NACM40ISETS
Ø4.5 NACM45ISETS
Ø5.0 NACM50ISETS
Ø6.0 NACM60ISETS
SinusAll KitSCA Kit · SLA KitFR Kit · SR KitGBR Kit · EZ GBR Kit · GBR ComponentCti-memTi-MeshACM
Sinus LiftRepairGBR Solution
• Auto Chip Maker Technique Guide
4
1Stopper
· Connect the stopper to the sterilized ACM drill.
3Drilling
· To prevent slipping of the ACM drill, slightly tilt the drill left and right until the drill stably positions itself. (80rpm / Non-irrigation recom-mended)
· In order to collect high quality autograft bone, drill only 3~4mm deep from one site, and move on to a different site to continue drilling.
2Locate the ACM
· Select the most suitable place to collect autograft bone.· Position the ACM Drill where the autograft bone will be collected.
ACM (Auto Chip Maker)ACM is an instrument to collect autograft bone from mandibular molars or incisor for GBR in defected area.
SinusAll Kit / SCA Kit / SLA Kit / FR Kit / SR Kit / GBR Kit / EZ GBR Kit / GBR Component / Cti-mem / Ti-Mesh / ACM
Neobiotech Sinuslift / Repair / GBR
SIN
US
SIN
USL
IFT
REPA
IR G
BR
Neobiotech Co., Ltd. E-space #1001, 36, Digital-ro 27-gil, Guro-gu, Seoul, Republic of Korea Tel. +82-2-582-2885 Fax. +82-2-582-2883