Oculus Rift DK1 Control Box Buttons Replacement · Oculus Rift DK1 Control Box Buttons Replacement This guide will teach you how to remove and replace the Oculus Rift control box
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Oculus Rift DK1 Control Box ButtonsReplacement
This guide will teach you how to remove and replace the Oculus Rift control box buttons that nolonger register your touch.
Rédigé par: Ross De Vito
Oculus Rift DK1 Control Box Buttons Replacement Brouillon : 2016-03-28ID de tutoriel : 35940 -
The following steps will guide you in how to replace the buttons on the motherboard of the OculusRift. Removing and replacing the buttons requires a high level of skill in desoldering and soldering.We have linked to iFixit and other outside resources on how to desolder and solder, but previousexperience is recommended.
Use your finger(s) to start lifting the motherboard from the control box casing. While doing so, useyour other hand to push the DVI connector into the control box casing.
When the DVI connector has cleared the casing, lift the motherboard.
Be careful! There should be two sets of wires still connected to the control box - do not tug onthem. Simply flip the motherboard over to access these wires.
When reassembling the device, ensure that all of the wires are clear of the buttons.
Étape 4
Use a plastic opening tool or your fingernails to disconnect the grey wire connectors. To makeremoval easier, pry the left and right edges to carefully remove the connector.
Do so for both of the wires attached to the motherboard.
Now fully separate the motherboard from the control box casing.
Oculus Rift DK1 Control Box Buttons Replacement Brouillon : 2016-03-28ID de tutoriel : 35940 -