SUBMITTAL NUMBER: 232500-01.00 OCPS CLAY SPRINGS ES SUBMITTAL TRANSMITTAL SUBMITTAL DETAILS: REVIEWERS: SUBJECT: HVAC WATER TREATMENT PD DATE RECIEVED: Nov 13, 2014 DISCIPLINE: Mechanical PRIMARY: KEVIN KING [email protected]TAD RIVENBARK [email protected]MATERN ENGINEERING PHN: (407) 740-5020 FAX: (407) 740-0365 MATERN ENGINEERING PHN: (407) 740-5020 FAX: (407) 740-0365 SECONDARY: PRIORITY STATUS: 2-STANDARD REVIEWER DUE DATE: 11/25/2014 SPECIFICATION REF: 23 25 00 DWG REF. NONE DWG TITLE: NO OF ITEMS: ITEM DESCRIPTI REVIEW STATUS: COMMENTS: CONTRACTOR/CM: : WILLIAMS COMPANY : BRAD KUBIN 2301 SILVER STAR RD. ORLANDO, FL, 32809 (407) 295-2530 FAX:(407) 297-0459 REVIEWED RETURNED ITEMS: DATE RETURNED TO CM: 11/18/2014 BUILDING REFERENCE: 1 Product Literature(s) PAGE 1 OF 1 RHODES + BRITO ARCHITECTS INC. : 605 E. ROBINSON STREET, SUITE 750 : ORLANDO, FL. : 32801 : 407.648.7288 : FAX.648.7289 cc: OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, 32809 (407) 317-3700 FAX:(407) 317-3768 R+B FILE: : 13017-0001.X6
20
Embed
OCPS CLAY SPRINGS ES SUBMITTAL TRANSMITTALplanroom.redteamsoftware.com/TS/CompaniesTS/WCMG/Uploads/... · Class: Basis of Design (1) Equal (2) Substitution (3) ACTION CODE X A No
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
THIS SUBMITTAL IS ISSUED TO YOU FOR YOUR REVIEW. PLEASE RESPOND AND RETURN...WITH THIS COMPLETED SAM TRANSMITTAL...TO MICHELE BUDAY-URDANETA NO LATER THAN: 11/25/2014. PLEASE COMPLETE REVIEW STATUS AT RIGHT
Class: Basis of Design (1) Equal (2) Substitution (3)
ACTION CODE X A No exceptions taken. B Make corrections noted. C Revise and Resubmit. D Submit Specified Item. E Rejected. N Review not required.
THE FOLLOWING COMMENTS SHALL BE CONSIDERED AN INTEGRAL PART OF THE SUBMITTAL DATA REVIEW. REVIEW OF THIS DATA IS ONLY FOR CONFORMANCE WITH THE DESIGN CONCEPT AS GIVEN IN THE CONTRACT DOCUMENTS. THE CONTRACTOR IS RESPONSIBLE FOR: QUANTITIES, FUNCTIONS, DIMENSIONS AND COORDINATION OF THE WORK WITH OTHER TRADES.
END OF SUBMITTAL DATA REVIEW COMMENTS
TRASAR® TRAC109Closed System Treatment
Product Bulletin
PRODUCT DESCRIPTION AND APPLICATIONTRAC109 is a liquid, nitrite-based chemical treatment used for the control of corrosion in closed cooling systems. Thisproduct is designed to protect both mild steel and copper based alloys from corrosion. TRAC109 can be easily monitoredusing Nalco's TRASAR technology.
PHYSICAL & CHEMICAL PROPERTIESThese properties are typical. Refer to the Material Safety Data Sheet (MSDS), SECTION 9, for the most current data.
Color cloudy yellow
Form liquid
Odor none
Density 11.18lb/gal [1.34 kg/L]
Specific Gravity @77°F (25°C) 1.34
pH (Neat) 12 - 14
Freeze Point -13°F (-25°C)
Flash Point (PMCC) none
Boiling Point 222.8°F (106°C)
ACTIVE CONSTITUENTS
Component Function
Nitrite Carbon Steel Corrosion Inhibitor
Borate pH Buffer
Azole Copper Corrosion Inhibition
TRASAR # 2 Product Monitoring and Control
REGULATORY APPROVALSTRAC109 is intended for industrial use only. It should not be fed to potable water systems. Refer to the Material Safety DataSheet (MSDS), SECTION 15 for the most recent information on approvals.
MATERIALS OF COMPATIBILITY
Compatible Not Compatible
Buna-N Derakane 307
Brass Polyurethane
EPDM
HDCL
Hypalon
Vinyl
Polyethylene
Neoprene
Plasite 4300
Mild Steel
Plasite 7122
Polypropylene
Polyvinyl chloride
Stainless Steel 304
Stainless Steel 316
Teflon
Viton
DOSAGE AND FEEDINGThe dosage of TRAC109 will vary depending on the operating characteristics of your system. Your Nalco sales engineer willrecommend the optimum dosage for cost-effective control and results.
Refer to SECTIONS 11 and 12 of the Material Safety Data Sheet for all available mammalian and aquatic toxicityinformation.
SAFETY AND HANDLINGTRAC109 is an alkaline product which may cause eye or skin irritation. Chemical resistant gloves and safety gogglesshould be worn when handling TRAC109. Read SECTION 8 of the Material Safety Data Sheet for specific personalprotective equipment (PPE) and SECTION 3 for health effects information.
STORAGETRAC109 contains a reportable quantity substance (RQ). All storage vessels of TRAC109 should be in secondarycontainment if the storage capacity exceeds the RQ of 240 pounds.
TRAC109 should be stored in a location where the product temperature can be kept in a range between 30°F [-1°C] and120°F [49°C] . In cold climates, heat tracing and insulation of exposed containers and transfer lines may be necessary.
Recommended in-plant storage limit is one year. Refer to the Material Safety Data Sheet (MSDS), SECTION 7, for the mostcurrent data.
REMARKSIf you need assistance or more information on this product, please call your nearest Nalco Representative. For more newsabout Nalco Company, visit our website at www.nalco.com.
For Medical and Transportation Emergencies involving Nalco products, please see the Material Safety Data Sheet for thephone number.
ADDITIONAL INFORMATIONTRASAR, NALCO and the Logo are registered trademarks of Nalco Company (7-24-2008)
Nalco Company, 1601 West Diehl Road, Naperville, Illinois 60563-1198
DescriptionThe Nalco PVC Coupon Rack is used to evaluate the effectiveness of chemical treatment programs, predict equipment life, diagnose corrosion problems, and to correlate corrosion trends to control parameters. The PVC units are ideal for inserting a variety of coupons into cooling systems rated up to 150 psi (10.4 bar) at 140°F (60°C).
NALCO COMPANY LocationsNorth America: Headquarters – 1601 West Diehl Road • Naperville, Illinois 60563 • USA
Energy Services Division – 7705 Highway 90-A • Sugar Land, Texas 77487 • USAEurope: A-One Business Center • Z.A. La Pièce 1 • Route de l’Etraz • 1180-Rolle • SwitzerlandAsia Pacific: 2 International Business Park • #02-20 The Strategy Tower 2 • Singapore 609930Latin America: Av. das Nações Unidas 17.891 • 6° Andar 04795-100 • São Paulo • SP • Brazil
www.nalco.com
NALCO® 2567
Alkaline Cleaner
Product Bulletin
PRODUCT DESCRIPTION AND APPLICATION
NALCO 2567 is a concentrated, liquid, alkaline cleaner that is effective in removing heavy oil and grease accumulations when used in concentrated form. Lighter soils, including waxes, dirt, gums, soaps, cutting and process oils and coat dust are removed by NALCO 2567.
NALCO 2567 contains effective penetrants, emulsifiers, peptizers, dispersants, wetting agents and a corrosion inhibitor to protect metals that are normally reactive in an alkaline environment.
NALCO 2567 is very effective when used as a boil-out chemical for alkaline boil-outs of boilers and closed loops.
PHYSICAL & CHEMICAL PROPERTIES
Color Greenish Yellow Density @ 60 °F [15.6 °C] 8.6 - 8.8 lb/gal. Specific Gravity @ 60 °F [15.6 °C] 1.03 - 1.06 pH (5% solution) 11.9 Flash Point (PMCC) None Freeze Point 21 °F [-6.1 °C] Cloud Point 30 °F [1.1 °C] Odor Fresh Pine Freeze-Thaw Recovery Complete Solubility in Water Complete
Refer to Section 15 on the Product Material Safety Data Sheet.
MATERIALS OF COMPATIBILITY
NALCO 2567 is safe for cleaning most metal surface including ferrous metals, aluminum, galvanized iron, copper, brass and others when used as directed. Special instructions are provided for cleaning aluminum and zinc metals.
DOSAGE AND FEEDING
For complete dosage and feeding recommendations, consult your Nalco representative.
Refer to Product Material Safety Data Sheet, Sections 6 and 12 for aquatic and mammalian information.
SAFETY AND HANDLING
Read the Material Safety Data Sheet before using this product.
Always use personal protective equipment (PPE) when handling neat or dilute product. Use impermeable gloves and chemical splash goggles when attaching feeding equipment, doing maintenance or handling products. A chemical cartridge respirator with a dust/mist pre-fitter, or a self contained breathing apparatus should be used when ventilation is inadequate. Refer to Section 10 of the Material Safety Data Sheet.
NALCO 2567 is an alkaline cleaner and may cause eye injury and severe skin irritation. In cases of contact, wash skin with soap and water. For eyes, immediately flush with large amounts of water for at least 15 minutes and get medical attention.
STORAGE
NALCO 2567 has complete freeze-thaw recovery; however, storage temperatures should be between 60 °F [15.6°C] and 120°F [48.9°C]. If the product freezes, warm it to about 60°F [15.6°C] and roll drum to re-mix. The container should be kept closed when not in use. NALCO 2567 has a shelf life of 12 months.
REMARKS If you need assistance or more information on this product, please call your nearest Nalco Representative. For more news about Nalco Company, visit our website www.nalco.com
For Medical and Transportation Emergencies involving Nalco products, please see the Material Safety
Data Sheet for the phone number.
ADDITIONAL INFORMATION
NALCO and the logo are trademarks of Nalco Company (7-2-04) Ecolab is a trademark of Ecolab USA, Inc.
Nalco Company, 1601 West Diehl Road, Naperville, Illinois 60563-1198
Subsidiaries and Affiliates in Principal Locations Around the World
H-550 is a broad-spectrum, nonoxidizing biocide approved for use in recirculating cooling towers, air washers with mist eliminators, pasteurizers, and heat transfer systems. H-550 is particularly effective in controlling fungi, slime-forming bacteria and sulfate-reducing bacteria. Because of its persistency and efficacy at elevated pH, H-550 is frequently used in closed cooling water loops.
Effective on a wide variety of biological activityEffective on aerobic and anaerobic organisms Effective on sulfate-reducing bacteria and other odor-causing bacteria
A highly effective Microbiocide for use in controlling slime forming bacteriaImproves and maintains heat transfer efficiency Bacterial films that cannot be picked up in visual inspections can increase HVAC energy usage from 5 to 10%
Key product featuresEffective pH range 6 to 9.5 Non-foaming Low odor Non-halogenated
Recommended in closed cooling systemsEffective at pH > 8 Compatible with glycol and common closed system inhibitors
PHYSICAL & CHEMICAL PROPERTIES
These properties are typical. Refer to the Material Safety Data Sheet (MSDS), SECTION 9, for the most current data.
Form Liquid Color Clear Density 1.126 kg/l (9.4 lb/gal) Specific Gravity @ 25
oC (77
oF) 1.12
pH (neat) 3.1 - 4.5 Freeze-Thaw Recovery Complete Freeze Point - 21oC (- 5.8oF)Boiling Point 100.5oC (213oF)Flash Point (PMCC) None Odor Aldehyde
ACTIVE CONSTITUENTS
Active Function
Glutaraldehyde Biocide
REGULATORY APPROVALS
Refer to the Material Safety Data Sheet (MSDS), SECTION 15 for the most recent information on approvals.
H-550 must be applied according to appropriate national and local regulations. As with all biocides applied in the United States, H-550 is regulated by the US EPA under the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA). It is a violation of federal law to use this product or any biocide in a manner inconsistent with its product label. EPA Registration No. 464-704-1706
H-550 should be fed via a closed feed system (a closed feed system being defined as a system in which fluid is moved from a closed storage vessel into a treated media without exposure to the atmosphere). For complete dosage and feeding recommendations, consult your Nalco sales engineer.
ENVIRONMENTAL AND TOXICITY DATA
Refer to the Material Safety Data Sheet (MSDS), SECTIONS 11 and 12, for the most current data.
SAFETY AND HANDLING
Refer to the Material Safety Data Sheet (MSDS), SECTIONS 3 and 8, for the most current data.
STORAGE
Refer to the Material Safety Data Sheet (MSDS), SECTION 7, for the most current data.
Freeze point of this product is 21oC (-5.8oF) and should be stored appropriately. The recommended in-plant storage limit for H-550 is one year.
REMARKS If you need assistance or more information on this product, please call your nearest Nalco Representative. For more news about Nalco Company, visit our website www.nalco.com
For Medical and Transportation Emergencies involving Nalco products, please see the Material Safety
Data Sheet for the phone number.
ADDITIONAL INFORMATION
Ecolab, Nalco and the logo are trademarks of Ecolab USA Inc. All other trademarks are the property of their respective owners.
Nalco An Ecolab Company
Subsidiaries and Affiliates in Principal Locations Around the World
Neptune By-Pass Feeders are a convenientmethod of introducing treatment chemicalsinto closed circulating water systems.
Neptune By-Pass Feeders are ideal fortreating hot and chilled water circulatingloops used in heating and air conditioningsystems, process heating and cooling orlarge engine water jackets.
Neptune offers two styles of By-Pass Feeders:A vertical style with dish bottom in and avertical style with dish bottom out.
Filters are available for system cleanupand monitoring.
A high pressure cap rated to 300 psiis now standard. The first closureimprovement in over two decades.
Filter Feeders
The Neptune Filter Feeder combines chemical addition and high capacity filteringin one piece of equipment. It is a convenient way to introduce solid or liquidchemicals into hot or cold water closed circulating systems.
• Eliminates need for separate By-Pass Feeder and filter.
• Filtration can be achieved at the same time as chemical addition.
• Extended neck with top inlet allows simple installation of filter bag and basket.
• Filter bags are available in 50, 20, 5 and 1 micron ratings. (Order separately.)
• Filter bags are quickly and easily replaced.
FILTER FEEDERMODEL FTF-5DB
Neptune’s FIRST FilterFeeder with FullBottom Drain andAnchor Bolt Holes
NEW
By-PassFeeders
Filter Bag Kits
Available for all “VTF” and “DBF” models up to 10 gallons.Kit includes bag, bag frame, tubing and connectors. Theaddition of a filter bag allows the By-Pass Feeder to functionsimultaneously as a side stream filter. (A clean bag is ratedat approximately 30 microns.) Cannot be used withDBFC models.
Vertical Style – Dish Bottom Out
The “DBF” series features wide-mouth caps manufacturedby Neptune. These caps utilize a square section “O” ringseal and will close easily by hand. Advantages ofthis series are demountable leg extensions anda full bottom drain. Optional Filter Bag Kitmay be added.
”DBFC” models include a built-insupport and mountingfor a cartridge filter(order cartridgeseparately).
See page 3 for filterspecifications.
MODEL FILTER APPROX. .MAX. A B C D E F SHIPNUMBER CAPACITY *PRESSURE* WEIGHT
*At 200°F Max. †Filter support not included with base unit. Purchase optional filter bag kit.
VTF-2HP with filterbag kit installed
(bag frameshown infront ofbag forclarity only)
F
D
A
B
31⁄2"
C
E
30°
5⁄16" MTG. HOLES 3⁄4" FEMALE FITTING NPT
4" FILL CAP
MODEL FOR USE ON
FBK-2 VTF-2HP, DBF-2HP
FBK-5 VTF-5HP, DBF-5HP
FBK-10 VTF-10HP, DBF-10HP
OLD STYLE CAPSThree lug, 1⁄3 turn design
rated to 200 psi.
NEPTUNE HIGH PRESSURE CAPCoarse thread, 21⁄2 turn design
rated to 300 psi.
Caps
All Neptune By-Pass Feeders offerthe new style, quick opening,high pressure closure.
These closures offer better sealingwith less force and eliminate theneed for tools. Design binds captightly when under pressure making it necessary tobleed pressure from tank before removing cap.
Underside of cap which contacts liquid is epoxy-coated.
PART NO. DESCRIPTION
107290 5 Micron Pleated Filter
107287 20 Micron Pleated Filter
3⁄4" FNPT OUTLET
3⁄4" FNPT INLET
31⁄2"
A
B
C
Vertical Style –Dish Bottom In
The “VTF” series is the most popular and eco-nomical of the by-pass feeders available fromNeptune. The series uses the same widemouth easy closecaps described in the“Dish BottomOut” style.Optional FilterBag Kit maybe added.
Standard ModelsMODEL FILTER APPROX. .MAX. A B C SHIPNUMBER CAPACITY *PRESSURE* WEIGHT
*At 200°F Max. †No filter included with base unit. Purchase optional filter bag kit.
Feeder BodiesMODEL APPROX. .MAX. A B C SHIPNUMBER CAPACITY *PRESSURE* WEIGHT
VTF-2-1 2 Gallons 300 psi 20" 6" 123⁄4" 23 lbs.
VTF-5-1 5 Gallons 300 psi 18" 10" 101⁄2" 37 lbs.
*At 200°F Max.
Specifications – All Models
• Working pressure: to 300 PSI max. at 200°F
• Tank shell:2 gallon unit – 11 gauge steel 10 gallon unit – 10 gauge steel5 gallon unit – 10 gauge steel 12 gallon unit – 10 gauge steel
• Tank heads:2 gallon unit – 11 gauge steel 10 gallon unit – 9 gauge steel5 gallon unit – 9 gauge steel 12 gallon unit – 9 gauge steel
• Cap: cast iron with Buna N “�” ring.Wide mouth, easy open/easy close.
31⁄2"OPENING
AC
B3⁄4" FNPT INLET
3⁄4" FNPT OUTLET
4" FILL CAP
3⁄4" FNPT OUTLET
3⁄4" FNPT INLET
1" NPT
A
B
C
Cartridge Filter Units
“DBFC” models include a built-in supportand mounting for a cartridge filter.(Order cartridge separately.)
Cartridge filter modification cannot beinstalled in DBF models; model DBFC mustbe ordered for use with cartridge filter.
DBFC-5 withcartridge filter
installed
FilterAssembly
ALL MODELS(except “DB” type)
31⁄2"
INLET(FNPT)
OUTLET(FNPT)
4" FILLCAP
27⁄8"
251⁄4"
313⁄4"REF
Features
• Stainless steeldissolving basket holds and fully supports thefilter bag inside (order bag separately).
• Ring-top bags feature handles for easy removal.
• “DB” type feeders have a full bottom drain andbolt on legs with anchor bolt holes.
• Model FTF-5150HP features oversize 11⁄2"inlet andoutlet connections. Can be used for system cleanupwith high volume pumps where high flow rates aredesired for fast clean-up or flush-out prior to start-up.
• “CL” Models feature a welded base to allow boltingto the floor or other mounting surface. Four holes for3⁄8" bolts are provided on each Anchor Bolt Plate.
See page 3 for specifications.
FilterFeeders
MODEL APPROX. .MAX. DIAM. CONN. DIMENSIONSNUMBER CAPACITY *PRESSURE* SIZE A B C D