Occupational Health and Safety (OHS)
Feb 23, 2016
Occupational Health and Safety (OHS)
• It is also expected that they can give at least six occupational health and safety (OHS) that are related to computer hardware servicing.
The following are the examples of OHS that is related to computer hardware servicing.
• Contingency measures during workplace accidents, fire and other emergencies are recognized.
• Personal protective equipment are correctly used in accordance with organization OHS procedures and practices.
• Hazard/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace and environment.
• Always discharge yourself before touching any part of the computer.
• Be careful with tools that may cause short circuit.• Wear rubber sole shoes when standing on the ground or in a
concrete floor.
The following are the examples of OHS that is related to computer hardware servicing.
• Always power off and unplug the computer before working on it.
• When making circuit changes, switch off and unplug the power cord from the equipment then discharge the capacitors.
• Replace only fuses with those proper rating. • Hold the components by the edges and do not touch the IC’s. • Read and follow instructions on the manual carefully.• Do not use excessive force if things don’t quite slip into place
Categories and with its tools• Work Area• At least 4 sq. meter• Table• Rubber mat• Extension wire (220/110 v)• Fire extinguisher
• Materials• Computer casing (ATX/AT)• Motherboard with user’s manual • Microprocessor unit• Power supply unit• Memory modules (DIMM/SIMM/SDRAM/RDRAM)• Video card(PCI, AGP, ISA, Built-in Video Card)• LAN card(Built-in, Internal)
Categories and with its tools• Modem (Internal, External)• Drives(FDD, HDD, CD-ROM)• Data Cable• Auto Voltage Regulator (AVR)
• Tools• Screwdrivers (philips and flat)• Pliers (long-nose and cutter type)• Anti-static protection• Multimeter• Cable tester• Logic probe• Crimping tool• Scoring tool
Categories and with its tools• Side cutter• UTP cable• Cable tie• Gloves
• Equipment• Pc system, system unit• Monitor/ keyboard/ mouse• Printer• Computer table and chair
Work Area• At least 4 sq. meter
Work Area• Table
Work Area• Rubber mat
Work Area• Extension wire (220/110 v)
Work Area• Fire extinguisher
Materials• Computer casing (ATX/AT)
Materials• Motherboard with user’s manual
Materials• Microprocessor unit
Materials• Power supply unit
Materials• Memory modules (DIMM/SIMM/SDRAM/RDRAM)
Materials• Video card(PCI, AGP, ISA, Built-in Video Card)
Materials• LAN card(Built-in, Internal)
Materials• Modem (Internal, External)
Materials• Drives(FDD, HDD, CD-ROM)
Materials• Data Cable
Materials• Auto Voltage Regulator (AVR)
Tools• Screwdrivers (philips and flat)
Tools• Pliers (long-nose and cutter type)
Tools• Anti-static protection
Tools• Multimeter
Tools• Cable tester
Tools• Logic probe
Tools• Crimping tool
Tools• Scoring tool
Tools• Side cutter
Tools• UTP cable
Tools• Cable tie
Tools• Gloves
Equipment• Pc system, system unit
Equipment• Monitor/ keyboard/ mouse
Equipment• Printer
Equipment• Computer table and chair