I N/ OUT BOX ™ for Ceiling Fixtures NEW! Outlet boxes on back 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 Fax 570/562.0646 www.aifittings.com Arlington Arlington’s IN/OUT BOX for ceiling fixtures adjusts up to 1-1/2" to accommodate varying ceiling thicknesses, like single or double drywall. • Pre-set for 1/2" ceiling... Depth adjusts up to 1-1/2" • Always accessible depth adjustment screw allows for depth adjustment of box before or after the ceiling is in place • Complies with 2014 NEC, 314.20 for set back boxes • Mounts securely to joist in new construction • Listed for fixture support up to 50 lbs • UL/CSA Listed Adjustable Non-Metallic Box for New Construction Made in USA FA426 Adjustable Fixture Box Patent pending Easy Installation in New Construction Depth adjustment screw 1 Install FA426 onto joist with a MINIMUM of four screws; (2) through front flange, (1) in each rear position. A, B, C, D above. A B C D Catalog UPC/DEI/NAED Description Size/ Unit/Std Number Mfg. #018997 Non-Metallic IN/OUT BOX™ Cu Inches Pkg FA426 40040 Adjustable Ceiling Fixture Box Round 25/ctn 20.5 cu in FA426GC 40041 Adjustable Ceiling Fixture Box Round 25/ctn w/ ground clip for Canada 20.5 cu in Includes (4) installation screws, NM cable connector Pre-set for 1/2" wall thickness - Depth adjustment up to 1-1/2" 2 After installing the box on joist slide plastic insert into box. Pull NM cable through installed NM connector. NEW! 3 After installation of wall board is complete use the depth adjustment screw to adjust position of FA426 box if necessary (see Photo B). FA426 adjusts up to 1-1/2" for ceiling thickness. Photo A (cutaway) shows box set back in double drywall ceiling Photo B Box now flush with ceiling
2
Embed
O N u E tl otn e W! b IN/ OUT BOX for Ceiling Fixtures Made in USA … · FA102 FA103 FA104 FA102D Catalog UPC/DEI/NAED Description Number of Gangs Unit/Std Number Mfg. #018997
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
IN/OUT BOX™ for Ceiling Fixtures
NEW!
Outlet boxes
on back
1 Stauffer Industrial ParkScranton, PA 18517800/233.4717 Fax 570/562.0646www.aifittings.com
Arlington
Arlington’s IN/OUT BOX for ceilingfixtures adjusts up to 1-1/2" toaccommodate varying ceilingthicknesses, like single or doubledrywall.
• Pre-set for 1/2" ceiling... Depth adjusts up to 1-1/2"
• Always accessible depth adjustment screw allows for depth adjustment of box before or after the ceiling is in place
• Complies with 2014 NEC, 314.20 for set back boxes
• Mounts securely to joist in new construction
• Listed for fixture support up to 50 lbs
• UL/CSA Listed
Adjustable Non-Metallic Box for New Construction
Made in USA
FA426Adjustable Fixture Box
Patent pending
Easy Installation in New Construction
Depth adjustment screw
1 Install FA426 onto joist with a MINIMUM of four screws; (2) through front flange, (1) in each rear position. A, B, C, D above.
FA426 40040 Adjustable Ceiling Fixture Box Round 25/ctn20.5 cu in
FA426GC 40041 Adjustable Ceiling Fixture Box Round 25/ctnw/ ground clip for Canada 20.5 cu in
Includes (4) installation screws, NM cable connectorPre-set for 1/2" wall thickness - Depth adjustment up to 1-1/2"
2 After installing the box on joist slide plastic insert into box.
Pull NM cable through installed NM connector.
NEW!
3 After installation of wall board is complete use the depth adjustment screwto adjust position of FA426 box if necessary (see Photo B). FA426 adjusts up to 1-1/2" for ceiling thickness.
Photo A (cutaway)shows box set back indouble drywall ceiling
Photo BBox now flush withceiling
Arlington’s IN/OUT OUTLET BOXES are adjustablefor wall thicknesses up to 1-1/2"; perfect for usewhen the final thickness is not known; doubledrywall, change orders, tile, etc.
New! ...single-gang horizontal box FA101H forcountertops and horizontal outlets... single-gang, low profile FA101LP. Made for newwork installations with shallower wall cavities,it’s shorter than our ‘regular’ single-gang IN/OUToutlet box – perfect for smaller spaces.
• Complies with 2014 NEC, 314.20for set back boxes
• Always accessible depth adjustment screw• Secure installation on wood or steel studsin new construction
IN/OUT BOX™ Adjustable OUTLET BoxesAdjustable Non-Metallic Outlet Boxes for New Construction
Made in USA
1 Stauffer Industrial ParkScranton, PA 18517800/233.4717 Fax 570/562.0646www.aifittings.com