NVIDIA nForce NVIDIA Product Brand Identity and Usage Guideline Version 2.0/1105
NVIDIA nForceNVIDIA Product Brand Identity and Usage Guideline
Version 2.0/1105
ALWAYS maintain consistency of the NVIDIA colors by using the color values specified at right when printing or Web-publishing the logos. Use Pantone Matching System® (PMS) 382C as reference for NVIDIA Green. The NVIDIA product logos are based on PMS Cool Gray 2C.
SPOT COLOR
C M Y K 32 0 100 0
PROCESS
R G B 185 231 0
VIDEO ONLINE
HEXADECIMAL
CCFF00
PANTONE
PMS Cool Gray 2C
PANTONE
PMS 382C
SPOT COLOR
C M Y K 0 0 0 12
PROCESS
R G B 215 215 220
VIDEO ONLINE
HEXADECIMAL
CCCCCC
* The stylized text of the product logo does not necessarily reflect the correct way the product name should be written. For the proper copywriting style and format, please read and follow the guidelines for each product.** PANTONE® is a registered trademark of PANTONE, Inc. The colors shown on this page and throughout this guide are not intended to match the PANTONE Color Standards. For use of PANTONE Colors, refer to the standards found in the current edition of the PANTONE Color Formulas Guide.©2005 NVIDIA Corporation. All rights reserved.
This guide outlines the proper usage of all NVIDIA nForce® media and communications processor (MCP) badge logos. All logos must be used as is and cannot be altered in any way.
If there are any questions regarding these logo or brand identity guidelines, please contact your regional partner marketing manager.
The name NVIDIA and the NVIDIA logo are registered trademarks of NVIDIA Corporation. The name nForce and nForce product logos are trademarks of NVIDIA Corporation.
NVIDIA nForceThe correct way of writing “NVIDIA nForce” is uppercase “NVIDIA”, followed by a space, followed by a lowercase “n,” uppercase “F”, and lowercase “orce.” The registration mark follows “nForce.” In first reference, the name “NVIDIA nForce” should be trademarked. The nForce brand name should always be preceded by NVIDIA without a registration mark on NVIDIA (this differs from other products in the NVIDIA family).
NVIDIA nForce modelsThe correct way to write NVIDIA nForce models is to write NVIDIA nForce as indicated above, followed by "4", followed by a space, and all uppercase modifier "SLI XE".
NVIDIA nForce® media and communications processor (MCP)
NVIDIA nForce®4 SLI XE
Asia PacificSteven Huang+886 (2) 2175 [email protected]
EuropeChris Ayres+44 (118) 903 [email protected]
USALeslie Pirritano+1 (408) 566 [email protected]
Logo Usage/Trademarks
Writing* Example
Color Palette Example
NVIDIA Product Brand Identity and Usage Guideline NVIDIA Quadro
v02.1105
NVIDIA nForceNVIDIA Product Brand Identity and Usage Guideline
1.0”/2.54cm/72pixels1.25”/3.175cm/90pixels
Clear SpaceALWAYS maintain a clear space on all sides of the logo, measuring at least the width of the symbol square in the logo ('x'). No other graphic, text, logo, illustration, or photograph is to intrude into the clear space.
Minimum Size
x
x
Brand Badge
Available Versions• Shaded product badge• Flat product badge
All logos must be used as is and cannot be altered in any way except for size.
Use your best judgement when choosing between the shaded and flat badges. The shaded version may show best in less complex environments; in visually rich environments, the flat version may display better.
Approved Usage• Ads/collateral• Retail box• Promotional materials/tradeshow graphics• Presentations• Web sites
For approval on other usage, contact your regional partner marketing manager.
Minimum Size (Printed or Online Materials)ALWAYS maintain legibility of the NVIDIA logo and badge by using these print/pixel measurements as a minimum. The minimum size is measured by the width of the logo.
Minimum sizeShaded version: 1.25 inch/3.175 cm/90 pixelsFlat version: 1.0 inch/2.54 cm/72 pixels
If the project requires a logo size below this minimum size, use the NVIDIA Corporate badge.
Flat version onLight-Colored Background
Shaded version onLight-Colored Background
Flat version onDark-Colored Background
Shaded version onDark-Colored Background
Shaded Flat
Use proper badge size
List the specific MCP name in text below(ex: NVIDIA nForce4 SLI XE)
Product Collateral
NVIDIA nForce®4 SLI XENVIDIA nForce®4 SLI XENVIDIA nForce®4 SLI XENVIDIA nForce®4 SLI XE
Identify the MCP in ad copy(ex: NVIDIA nForce4 MCPs)
Use proper badge size
Ads
NVIDIA Product Brand Identity and Usage Guideline NVIDIA Quadro
v02.1105
NVIDIA nForceNVIDIA Product Brand Identity and Usage Guideline
1.25”/3.175cm/90pixels
Shaded version onDark-Colored Background
Flat version onLight-Colored Background
Flat version onDark-Colored Background
1.5”/3.81cm/108pixels
Product Logo
Clear SpaceALWAYS maintain a clear space on all sides of the logo, measuring at least the width of the symbol square in the logo ('x'). No other graphic, text, logo, illustration, or photograph is to intrude into the clear space.
Available Versions• Shaded product logo• Flat product logo
All logos must be used as is and cannot be altered in any way except for size.
Use your best judgement when choosing between the shaded and flat badges. The shaded version may show best in less complex environments; in visually rich environments, the flat version may display better.
Approved Usage• Ads/collateral• Promotional materials/tradeshow graphics• Presentations• Web sites
For approval on other usage, contact your regional partner marketing manager.
Minimum Size (Printed or Online Materials)ALWAYS maintain legibility of the NVIDIA logo and badge by using these print/pixel measurements as a minimum. The minimum size is measured by the width of the logo.
Minimum sizeShaded version: 1.5 inch/3.81 cm/108 pixelsFlat version: 1.25 inch/3.175 cm/90 pixels
If the project requires a logo size below this minimum size, use the NVIDIA Corporate badge.
Minimum Size
Shaded Flat
x
x
Use proper logo lock-up size
Web Site
Introducing NVIDIA GPU Motherboard Solutions
NVIDIA Product Brand Identity and Usage Guideline NVIDIA Quadro
v02.1105
NVIDIA nForceNVIDIA Product Brand Identity and Usage Guideline