NUMERICAL SIMULATION OF DAMAGE AND FAILURE OF LAMINATED 3-POINT BENDING SPECIMENS

Universidade de Aveiro Ano 2012 Departamento de Engenharia Mecânica Vienna University of Technology Year 2012 Institute of Lightweight Design and Structural Biomechanics ANDREY KHOLKIN SIMULAÇÃO DE DANO E FRACTURA EM ENSAIOS DE FLEXÃO EM 3 PONTOS EM PROVETES LAMINADOS NUMERICAL SIMULATION OF DAMAGE AND FAILURE OF LAMINATED 3-POINT BENDING SPECIMENS Dissertação apresentada à Universidade de Aveiro para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Engenharia Mecânica, realizada sob a orientação científica do Prof. Heinz Pettermann, Professor Associado do “Institute of Lightweight Design and Structural Biomechanics in Vienna University of Technology” e do Dipl. Ing. Jakob Gager, aluno PhD do “Institute of Lightweight Design and Structural Biomechanics in Vienna University of Technology”. Thesis presented to the University of Aveiro to follow the necessary requirements for obtaining the Master degree in Mechanical Engineering, under the supervision of Prof. Heinz Pettermann, Associate Professor of the Institute of Lightweight Design and Structural Biomechanics of the Vienna University of Technology and Dipl. Ing. Jakob Gager, PhD student of the Institute of Lightweight Design and Structural Biomechanics of the Vienna University of Technology.

NUMERICAL SIMULATION OF DAMAGE AND FAILURE OF LAMINATED 3-POINT BENDING SPECIMENS

Documents

abaqus

continuum shell

fiberreinforced polymers

laminates