Top Banner
2212-8271 © 2014 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/). Selection and peer-review under responsibility of The International Scientific Committee of the “2nd Conference on Surface Integrity” in the person of the Conference Chair Prof Dragos Axinte [email protected] doi:10.1016/j.procir.2014.04.014 Procedia CIRP 13 (2014) 78 – 83 © 2014 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/). Selection and peer-review under responsibility of The International Scientific Committee of the “2nd Conference on Surface Integrity” in the person of the Conference Chair Prof Dragos Axinte [email protected] ScienceDirect Available online at www.sciencedirect.com
6

Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

Mar 23, 2023

Download

Documents

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

2212-8271 © 2014 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of The International Scientific Committee of the “2nd Conference on Surface Integrity” in the person of the Conference Chair Prof Dragos Axinte [email protected]: 10.1016/j.procir.2014.04.014

Procedia CIRP 13 ( 2014 ) 78 – 83

© 2014 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of The International Scientifi c Committee of the “2nd Conference on Surface Integrity” in the person of the Conference Chair Prof Dragos Axinte [email protected]

ScienceDirectAvailable online at www.sciencedirect.com

Page 2: Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

79 Piotr Niesłony et al. / Procedia CIRP 13 ( 2014 ) 78 – 83

Page 3: Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

80 Piotr Niesłony et al. / Procedia CIRP 13 ( 2014 ) 78 – 83

Page 4: Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

81 Piotr Niesłony et al. / Procedia CIRP 13 ( 2014 ) 78 – 83

Page 5: Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

82 Piotr Niesłony et al. / Procedia CIRP 13 ( 2014 ) 78 – 83

Page 6: Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy

83 Piotr Niesłony et al. / Procedia CIRP 13 ( 2014 ) 78 – 83