1 NUKON AUTOMATION SHEET STORAGE SYSTEMS
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
NUKON AUTOMATION
SHEET STORAGE SYSTEMS
2
NUKON AUTOMATION SHEET STORAGE SYSTEMS
AUTOMATION LASERS WHICH INCREASE YOUR PRODUCTION EFFICIENCY
Nukon automation systems increase your machines productivity and present
high quality productıon opportunities in low time . It provides excellent
solution wıth semi-automatic and fully automatic options.
LOADING SYSTEM
Lıft - tech
N - lıft
LOADING-UNLOADING SYSTEM
Expert Lıft Compact
LOADING-UNLOADING WITH TOWER SYSTEM
Expert Lıft Tower
3LIFT - TECH
LIFT TECH has been designed for loading sheets to machines
automatically.
Machine operates at high efficiency and increases capacity of
production with LIFT TECH.
LIFT TECH create lower costs by increasing productivity with a
connected system from stock to machine.
The LIFT - TECH loading ECO-S LINE 1530, NF PRO 315.
4LIFT - TECH
We use special designed reducer
and motor to increase the quality
of machine usage.
Positioning is provided by servo-
motors.
We use high quality pads
Germany Schmalz brand which
has double suction for vacuuming.
Dry-type vacuum pump is used
with 25 m3 / h capacity
30% energy savings with couter balance system
Schmalz Vacuum System
THK Linear Guide
5LIFT - TECH
You can supply two machines at the same time
with Lift-Tech that is increased your capacity utilization.
6LIFT - TECH
Production efficiency is increased by taking
metal sheet from three different place with
LIFT-TECH
7LIFT - TECH
TECHNICAL SPECIFICATIONS
For NUKON machines ECO 1530 - NF PRO 315
Max lifting capacity 900 kg
Max lifting height 1200 mm
Max sheet size 1500x3000 mm
Min sheet thickness 0.5 mm
Carrying surface of load Plain, soft burr
Loads moving Horizontal
Quantity of vacuum ø 210 / 8 pieces
Max lifting speed 20 m/min
Max angle of rotation 180 °
Total machine power 4.25 kw
Approximately weight 3000 kg
Subject to change. Only specifications in our order confirmation are binding.
8N - LIFT
N-LIFT has been designed for loading sheets to
machines automatically.
Machine operates at high efficiency and increases
capacity of production with LIFT TECH.
N-LIFT minimizes space requirements with compact
design.
N-LIFT, thanks to the automation system can be
programmed structure.
9N - LIFT
We use high quality pads
Germany Schmalz brand which
has double suction for vacuuming.
Dry-type vacuum pump is used
with 25 m3 / h capacity
Safety system sensors are
available in the workplace.
It has flexible structure with 76°
angle which can load to
machine.
47 seconds cycle time
Hidraulic Power Unit
Schmalz VacuumSystems
10N - LIFT
TECHNICAL SPECIFICATIONS
For NUKON machines REX , VENTO , NF PRO 315
Max lifting capacity 750 Kg
Max lifting height 600 mm
Max sheet size 1500x3000 mm
Min sheet thickness 0.5 mm
Carrying surface of load Plain, Soft burr
Carrying of load Horizontal
Quantity of vacuum ø210 / 8 pieces
Cycle time 45 sec
Max lifting speed 20 m/min
Max angle of rotation 76 °
Total machine power 5.5 kw
Approximately weight 2500 kg
Subject to change. Only specifications in our order confirmation are binding.
11EXPERT LIFT COMPACT
Loading and unloading is done automatically on your machine with Expert Lift Compact.
It has 57 seconds cycle time which is designed to improve productivity.
Sheets which are separated by vacuum suction cups is transferred to the pallet exchange table
It allows to produce without requiring operator intervention
Vibrating system is used to separate the sheet which are stuck together.
12EXPERT LIFT COMPACT
It increases the capacity utilization working together loading-unloading system and machine.
It minimizes space requirements with compact design.
Expert Lift Compact can be installed both side of Nukon lasers according to request.
It provides the exact solution of single sheet detection with sheeting magnet and double-plate control system.
We use high quality pads Germany Schmalz brand which has double suction for vacuuming.
13EXPERT LIFT COMPACT
TECHNICAL SPECIFICATIONS
For NUKON machines 315 420
Available sheet length 3000 mm 4000 mm
Available sheet width 1500 mm 2000 mm
Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm
Carrying capacity of loading pallet 3000 kg 3000 kg
Min-Max sheet thickness 0,5-25 mm 0,5-25 mm
Max sheet weight 900 kg 1600 kg
Quantity of vacuum ø 160 / 20 pieces ø 160 / 20 pieces
Max horizontal travelling speed 12 m/min 12 m/min
Max vertical travelling speed 12 m/min 12 m/min
Subject to change. Only specifications in our order confirmation are binding.
14EXPERT LIFT TOWER
Expert lift Tower provides excellent
solution for continuous production by
combining automated pallet change
with compact storage technique
More efficient operation is provided
owning to automated operation.
Getting high quality owning to
transport of sheet without scratching
and deforming.
Non-stop cutting is continued.
15EXPERT LIFT TOWER
16EXPERT LIFT TOWER
Integration of the processing machine
Modular structure that can grow according to the request
Lower costs due to the compact lay-out
%75 saving time of loading-unloading
Fast, safety , easy usage
Cost of low purchase
17EXPERT LIFT TOWER
TECHNICAL SPECIFICATIONS
For NUKON machines 315 420
Available sheet length 3000 mm 4000 mm
Available sheet width 1500 mm 2000 mm
Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm
Carrying capacity of each loading pallet 3000 kg 3000 kg
Max pallet height 255 mm (Al) 150 mm (Al)
Max tower height 25 m 25 m
Max horizontal travelling speed 12 m/min 12 m/min
Max vertical travelling speed 12 m/min 12 m/min
Tower lift speed 18 m/min 18 m/min
Tower pallet pulling speed 32 m/min 32 m/min
Subject to change. Only specifications in our order confirmation are binding.
Related Documents
