Nt3 spill prevention technology 100% eco friendly

NATURE IS INNOVATION

SPILL PREVENTION SHIELD

NT3 Global Inc. specializes in solutions for many environmental challenges: oil spills, wastewater processing, oil sludge treatment and preventing, industrial cleaning and water evaporation prevention.

NT3 GLOBAL INC. believes that damage from accidents can be prevented with easy and cost-effective natural sons.

At the heart of all products is a patented filler – natural fibers with nano- reinforcement

which ensures

▪ THE HIGHEST ABSORBENCY IN THE MARKET

▪ BEST RESULT IN ANY TEMPERATURE

▪ LONG LASTING PERIOD OF USE

▪ PROVEN OLIOPHILIC MATERIAL

1

NT3 GLOBAL INC. OFFERS BEST SOLUTIONS

ABSORBENTS FOR RAPID SPILL RESPONSE SPILL PREVENTION SHIELD

GRANULATED ABSORBENT FOR SLUDGE PROCESSING AND WASTEWATER TREATMENT

WATER EVAPORATION PREVENTION MAT

2

NT3 Global Inc. SPILL PREVENTION SHIELD

The system effectively traps oil from catastrophic oil spills and leaks.

▪ 1 m2 of GO Spill Prevention System absorbs up to 240 liters of oil ▪ Works under any weather conditions ▪ GO fibers are 100% hydrophobic

Aggregate

GO mineral fibers

3

NT3 GLOBAL INC. SPILL PREVENTION SHIELD

CUTS YOUR COSTS Investments in GO Spill Prevention Shield System cut costs on rapid response in case of spill. The system fully prevents highly expensive sludge recycling as a result of ground contamination

SAVES YOUR TIME Spill Prevention Shield is easy to be installed, removed or replaced. No special equipment needed. Very long period of use.

SYNTHETIC BASED SYSTEMS AREN’T APPLICABLE Due to regulation protection systems can’t cause second contamination (SPCC GUIDANCE FOR REGIONAL INSPECTORS, (§§112.7(c), 112.8(c)(2) and 112.12(c)(2))

4

SPILL PREVENTION SHIELD FOR RAIL ROADS

SPILL PREVENTION SHIELD FOR RAIL ROADS

The system effectively traps oil in sensitive areas

▪ 1 sq. meter of the cover absorbs up to

240 liters of oil ▪ 100% non-combustible mat ▪ 100% hydrophobic ▪ Resistant to all weather conditions ▪ Easy to install and remove ▪ Used materials can be easily replaced

8

SPILL PREVENTION SHIELD – VERY EASY INSTALLATION

1. Just roll out GO Shield. No equipment needed

2. GO Shield is placed in the sensitive area

3. Place aggregate on top to secure the Shield

9

1 2 3

GO SHIELD WORKS IN ALL WEATHER CONDITIONS

Repels Water Contains Spills and Leaks Keeps Ground Clean

10

4 5 6

HOW IT WORKS

BEFORE THE SPILL

▪ Easy installation

▪ Doesn’t cause second ground contamination

▪ Stays stable during

maintenance procedures

IN CASE OF SPILL

▪ Hydrocarbons are fully absorbed by the Shield

▪ Fully compliment with

72 hours spill reaction policy

72 hours after – no oil is spilled on the ground. All is absorbed by GO Shield

11

5 liters of oil spilled

TECHNICAL AND QAULITY CHARACTERISTICS

▪ Thickness of the product is 50 mm

▪ Width is 1 m

▪ The length 6 m

▪ Supplied in rolls

▪ Weight of 1 sq. m – 1.2 kg

▪ All materials are produced according to

▪ Quality management system ISO 9001 and

ISO 14001 ▪ Nt3 Global Inc. products are certified

by CEDRE (France)

BUY THE PRODUCT OF TOMORROW, TODAY!

330 Joseph Carrier, Suite 200 Vaudreuil-Dorion, Qc

Canada, J7V 5V5

PHONE & EMAIL www.nt3global.com

CANADA/US: 514-990-3506 [email protected]