NSIC TECHNICAL SERVICES CENTRE, CHENNAI -32. · Timber company Chennai getting a salary of Rs. 8000 per month. I Thank NSIC for giving me this opportunity. I N.S. Sarunyan course

NSIC TECHNICAL SERVICES CENTRE, CHENNAI

I, R. Saminathan did course in Basic Electronics ”

period from 6.3.2017 to

for me. Now I am working

and getting a pay of Rs.7,000/

this opportunity.

I G. Mareshwaran did course in Basic Electronics ”

a period from 26.42017

useful for me. Now I am working

Chennai Chennai , as Service engineer and getting a pay of

Rs.22,000/-p.m. I Thank NSIC for giving me this opportunity

I Muzaffar Ahmed M did

for a period from 29.5.2017


Ltd, Chennai , as engineer and getting a pay of Rs.10,000/

I Thank NSIC for giving me this opportunity

I S.M. Surendhar did course in Basic Electronics ”

period from 29.5.2017


Chennai , as engineer and getting a pay of Rs.10,000/

Thank NSIC for giving me this opportunity

I S. Suresh Kumar did course in Field Technician ”

a period from 6.3.2017


Chennai , as Charge Entry and getting a pay of Rs.3000/

Thank NSIC for giving me this opportunity

NSIC TECHNICAL SERVICES CENTRE, CHENNAI

SUCCESS STORIES - 1

course in Basic Electronics ” at NSIC for a

to 21.4.2017. This course was very useful

for me. Now I am working in M/s. ONGC , as Graduate trainee

and getting a pay of Rs.7,000/-p.m. I Thank NSIC for giving me

course in Basic Electronics ” at NSIC for

26.42017 to 13.6.2017. This course was very

seful for me. Now I am working in M/s. Exide Baterry,

Chennai Chennai , as Service engineer and getting a pay of

I Thank NSIC for giving me this opportunity.

did course in Basic Electronics ” at NSIC

29.5.2017 to 14.7.2017. This course was very

useful for me. Now I am working in M/s. Vadim Infrastructure

Ltd, Chennai , as engineer and getting a pay of Rs.10,000/-p.m.


course in Basic Electronics ” at NSIC for a

to 14.7.2017. This course was very

useful for me. Now I am working in M/s. Orbit Controls pvt ltd

Chennai , as engineer and getting a pay of Rs.10,000/-p.m. I

SIC for giving me this opportunity.

course in Field Technician ” at NSIC for

6.3.2017 to 21.4.2017. This course was very

useful for me. Now I am working in M/s. AGS Health Care,

Chennai , as Charge Entry and getting a pay of Rs.3000/-p.m. I

Thank NSIC for giving me this opportunity.

NSIC TECHNICAL SERVICES CENTRE, CHENNAI-32.

I M.T. Meenu did course in Field Technician ” at NSIC for a

period from 6.3.2017 to 21.4.2017. This course was very useful

for me. Now I am working in M/s. Sutherland pvt ltd, Chennai ,

as Consultant and getting a pay of Rs.13000/-p.m. I Thank

NSIC for giving me this opportunity.

I V. Gokula krishnan did course in Field Technician ” at NSIC

for a period from 6.3.2017 to 21.4.2017. This course was very

useful for me. Now I am working in M/s. Exide Batteries pvt ltd

, Chennai , as Service engineer and getting a pay of Rs.12000/-

p.m. I Thank NSIC for giving me this opportunity.

I R. Rachana did course in Engineering project ” at NSIC for a


for me. Now I am working in M/s. Q spider, Chennai , as

Trainee and getting a pay of Rs.18000/-p.m. I Thank NSIC for

giving me this opportunity.

I M. Jaganthan did course in Embedded Hardware Developer ”

at NSIC for a period from 17.10.2017 to 14.11.2017. This

course was very useful for me. Now I am running my own

business M/s. Ganapathy Agency Chennai with a turnover of

1.37 crores. I Thank NSIC for giving me this opportunity.

I Prema V. did course in Engineering project ” at NSIC for a


for me. Now I am working in M/s. Infosys Mysore , as Engineer

and getting a pay of Rs.15000/-p.m. I Thank NSIC for giving

me this opportunity.

I C. Suvetha did course in Engineering project ” at NSIC for a


for me. Now I am working in M/s. Infosys, Mysore, as Engineer



I S. Vaibhavan course in Embedded Hardware Developer ” at

NSIC for a period from 8.11.2017 to 12.12.2017. This course

was very useful for me. Iam working as Global Manager in M/s.

I Gain Chennai with a turnover of 1.37 crores. I Thank NSIC for


I Sreejith K R course in Embedded Design using RTOS ” at


was very useful for me. Iam working as Execution &

communication engineer in M/s. Vijaya Tanks ans Vessels ,

Chennai getting a salary of Rs. 2.00lacs per annum. I Thank


I J. Muthu course in Embedded Hardware Developer ” at


was very useful for me. Iam working as Manager in M/s.

Apollo Tyers Chennai getting a salary of Rs. 4.50 lacs per

annum. I Thank NSIC for giving me this opportunity.

I S. Godwin Sundhar course in E CAD ” at NSIC for a period

from 7.11.2017 to 6.12.2017. This course was very useful for

me. Iam working as SAP booking in M/s. Timber company

Chennai getting a salary of Rs. 8000 per month. I Thank NSIC

for giving me this opportunity.

I Azhagappan R. course in FPGA ” at NSIC for a period from

12.2.2017 to 10.4.2017. This course was very useful for me.

Iam working as SAP booking in M/s. Timber company Chennai

getting a salary of Rs. 8000 per month. I Thank NSIC for giving


I N.S. Sarunyan course in E-CAD ” at NSIC for a period from

7.11.2017 to 6.12.2017. This course was very useful for me.

Iam working as Draughtsman in M/s. Sandy Construction

Chennai getting a salary of Rs. 11000 per month. I Thank NSIC


I D.Rathish did course in Embedded Hardware Developer ” at

NSIC for a period from3.1.2018 to 6.2.2018. This course was

very useful for me. Iam working as Voice in M/s. Kochar

Chennai getting a salary of Rs. 1.30 per annum. I Thank NSIC


I S.Suresh kumar course in UPS and Inverter ” at NSIC for a


for me. Iam working as Process Associate in M/s. AGS Health

Pvt Ltd Chennai getting a salary of Rs. 1.50 lacs per annum. I


I B. Vasudevan did course in Embedded Hardware Developer”

at NSIC for a period from 10.9.2017 to 12.10.2017. This course

was very useful for me. Iam working as System Admn in M/s.

Inspire Network Solution, Chennai getting a salary of Rs.

10,000 per month. I Thank NSIC for giving me this

D. Madhan kumar did course in Embedded Hardware

Developer” at NSIC for a period from 8.11.2017 to 12.12.2017.

This course was very useful for me. Iam working as Quality

engineer in M/s. Ford India pvt ltd, Chennai getting a salary of

Rs. 10,000 per month. I Thank NSIC for giving me this

I M.Dinesh did course in Embedded Hardware Developer” at


was very useful for me. Iam working as BMS Engineer in M/s.

Honeywell Automation India Pvt ltd, Chennai getting a salary

of Rs. 1.40 lacs per annum. I Thank NSIC for giving me this

I G.P. Ajith kumar did course in Autocad” at NSIC for a period

from 7.12.2017 to 8.1.2018. This course was very useful for

me. Iam working as Technician in M/s. Delphi Automotive Ltd

, Chennai getting a salary of Rs. 1.20 lacs per annum. I Thank


I A. Arjun did course in Embedded Hardware Developer” at


was very useful for me. Iam working as Technician in M/s.

Virco Manufacturing , Chennai getting a salary of Rs. 1.34 lacs

per annum. I Thank NSIC for giving me this opportunity.

I R. Saran Kumar did course in Embedded Hardware

Developer” at NSIC for a period from 8.11.2017 to

12.12.2017. This course was very useful for me. Iam

working as Embedded Developer in M/s. RHDH Business

Solutions , Chennai getting a salary of Rs. 15000 per

month. I Thank NSIC for giving me this opportunity.

I A.V.R Praveen did course in Certified Automation

Engineering with HMI at NSIC for a period from 7.9.2017

to 6.10.2017. This course was very useful for me. Iam

working as Project Engineer in M/s. Plant Control &

Automation Techniques , Chennai getting a salary of Rs.

1.44 lacs per annum. I Thank NSIC for giving me this

I P. Anandha kumar did course in Embedded Hardware


27.11.2017. This course was very useful for me. Iam

working RTG Technician in M/s. Sanco Container Freight

Station, Chennai getting a salary of Rs. 15000 per month. I


R. Nevedha did course in Embedded Hardware Developer”

at NSIC for a period from 8.11.2017 to 12.122017. This

course was very useful for me. Iam working as Testing

Engineer in M/s. Venkateswara Electrical Industries Chennai

getting a salary of Rs. 11500 per month. I Thank NSIC for


I, P. Uma Mageswari did course in Embedded Hardware


12.122017. This course was very useful for me. Iam

working as R & D Trainee in M/s. Pulsars, Chennai getting a

salary of Rs. 11500 per month. I Thank NSIC for giving me

this opportunity.

I, P. Tamilarasi did course in Embedded Hardware


12.122017. This course was very useful for me. Iam

working as Data Management in M/sV&T Infrastructure

getting a salary of Rs. 8500 per month. I Thank NSIC for


I, A. Chokalingam did course in Embedded Hardware


12.122017. This course was very useful for me. Iam working

as Testing Engineer in M/.Avitronics System Tech Pvt Ltd,

Bangalore getting a salary of Rs. 1.2 lacs per annum. I


I, G. Nithya Bharathi did course in Embedded Hardware


14.11.2017 . This course was very useful for me. Iam

working as Frontend Developer in M/.Avitronics System

Tech Pvt Ltd, Bangalore getting a salary of Rs. 14,000 per


I, P. Jeyachandran did course in Embedded Hardware



working as Trainee in M/s.Waltech , Banglaore getting a

salary of Rs. 1.2lacs per annum. I Thank NSIC for giving me

this opportunity.

I, D.L.Prakash did course in Embedded Hardware



working as Design Engineer in M/s.Procon Inst Pvt Ltd,

getting a salary of Rs. 1.5lacs per annum. I Thank NSIC for


I, V. Lakshmi Narayana did course in Embedded Hardware

Developer” at NSIC for a period from 5.7.2017 to 1.8.2017 .

This course was very useful for me. Iam working as

Engineer in M/s. Mpower Automation getting a salary of

Rs. 2.42 lacs per annum. I Thank NSIC for giving me this

opportunity.

I, V. M.Anand did course in Embedded Hardware



working as Sales manager in M/s. Shriram chit fund pvt

ltd. getting a salary of Rs. 1.56 lacs per annum. I Thank


I, P. Dhanasekar did course in UPS and Inverter” at NSIC

for a period from 26.4.2017 to 13.6.2017 . This course

was very useful for me. Iam working as Electrical

Technician in M/s. ISC-Faculty Services Chennai getting a

salary of Rs. 1.2 lacs per annum. I Thank NSIC for giving


I, S. Thenmozhi did course Embedded Hardware



working as faculty in M/s. Educomp Solution, Chennai

getting a salary of Rs. 1.2 lacs per annum. I Thank NSIC


I, S.Muralidharan did course Embedded Hardware

Developer” at NSIC for a period from 5.12.2017 to 5.1.2018

. This course was very useful for me. Iam working as

Product testing operator in M/s. Venture Power system,

Chennai getting a salary of Rs. 118,000 per year. I Thank


I M. Satish did course Tool Design” at NSIC for a period

from 5.2.2017 to 28.4.2017 . This course was very useful

for me. Iam working as Quality engineer in M/s. Educomp

Solution, Chennai getting a salary of Rs. 12,000 per


I E.P. Gunaseelan did course Catia 7000” at NSIC for a

period from 16.11.2017 to 8.12.2017 . This course was

very useful for me. Iam working as CNC operator in M/s.

Super Auto forging, Chennai getting a salary of Rs. 90,000

per year. I Thank NSIC for giving me this opportunity.

I, K. Shiva did course ” CATIA at NSIC for a period from

18.9.2017 to 17.10.2018 . This course was very useful for me.

Iam working as Assembly in M/s. NCR Corporation of India

pvt. Ltd, Chennai getting a salary of Rs. 118,000 per year. I


I, V. Gopinath did course ” Embedded Hardware

Developer at NSIC for a period from 3.1.2018 to


working as Service engineer in M/s. Avalan Technologies

pvt ltd, Chennai getting a salary of Rs. 1.32 lacs per year.


I, v.Geethapriya did course ” Embedded Hardware

Developer at NSIC for a period from 3.1.2018 to 6.2.2018 .

This course was very useful for me. Iam working as IRO in

M/s. Just Dial Chennai getting a salary of Rs. 1.00 lacs per

year. I Thank NSIC for giving me this opportunity.

I, Mohana Sundaram did course Certified Automation

Engineer at NSIC for a period from 3.9.2017 to 6.11.2017 .

This course was very useful for me. Iam working as Project

engineer in M/s. Plant control & Automation Technologies

Chennai getting a salary of Rs. 11.00 lacs per year. I Thank


I, S.Swetha did ” Engineering project at NSIC for a period

from 8.1.2018 to 21.2.2018. This projects is very useful for

me. I am working as Software engineer in M/s. HSBC Bank

Chennai getting a salary of Rs. 7.00 per year. I Thank NSIC


I R. Vanishree did ” Engineering project at NSIC for a

period from 8.1.2018 to 21.2.2018. This projects is very

useful for me. Iam working as Software engineer in M/s.

BOSCH, Chennai getting a salary of Rs. 4.00 per year. I


I G. Sriranjani did ” Engineering project at NSIC for a

period from 11.1.2018 to 29.1.2018. This projects is very

useful for me. Iam working as Instrumentation engineer in

M/s. Honeywell Chennai getting a salary of Rs. 25,000 per


I Vidyadevi V. did ” Engineering project at NSIC for

a period 11.1.2018 to 29.1.2018. This projects is

very useful for me. Iam working as Gradute engineer

in M/s. SRM Technologies pvt ltd Chennai getting a

salary of Rs. 20,000 per month. I Thank NSIC for


I Sruthi B. did ” Engineering project at NSIC for a

period 11.1.2018 to 29.1.2018. This projects is very

useful for me. Iam working as Graduate engineer in

M/s. SRM Tata Consultancy Services, Ahmadabad

getting a salary of Rs. 20,000 per month. I Thank NSIC


I Sudharsan S.. did ” Engineering project at NSIC for a


useful for me. Iam working as Graduate engineer in

M/s. Johnson Controls Private Limited,Pune getting a

salary of Rs. 3.5 lacs per year. I Thank NSIC for giving


I R.Menaka. did ” Engineering project at NSIC for a



Neeyamo Enterprise Solutions Pvt Ltd,Madurai getting a

salary of Rs. 2.2 lacs per year. I Thank NSIC for giving


I S. Reshma did ” Engineering project at NSIC for a



IBM Bangalore getting a salary of Rs. 3.2 lacs per year. I


I B. Madhupatil did ” Engineering project at NSIC for a


useful for me. Iam working as Executive engineer in

M/s. KRG Technologies pvt ltd Chennai getting a salary of

Rs.17,000 per month. I Thank NSIC for giving me this

opportunity.

I Sneha kumari did ” Engineering project at NSIC for a

period 1.3.2018 to 21.3.2018. This projects is very useful

for me. Iam working as Network engineer in M/s. DXC

Technology DLF Chennai getting a salary of Rs.20,000 per


I, Veena Mishra did ” Engineering project at NSIC for a


for me. Iam working as Network engineer in M/s. Ernst &

Young LLP, Chennai getting a salary of Rs.18,000 per


I, S.Subakshya did ” Engineering project at NSIC for a


for me. Iam working as Software engineer in M/s. TCS,

Chennai getting a salary of Rs.3.5lacs per annum. I Thank


I, Shaik Anees did ” Engineering project at NSIC for a



Sriram Values Chennai, getting a salary of Rs.20,000 per


I, T.V. Nithish did ” Engineering project at NSIC for a


useful for me. Iam working as Engineer in M/s. Nouveau

Lab pvt ltd. Chennai, getting a salary of Rs.16,000 per


I Swathe P.M. did ” Engineering project at NSIC for a


useful for me. Iam working as Software Engineer in M/s.

TCS, Chennai, getting a salary of Rs.28,000 per month. I


I Surya R. did ” Engineering project at NSIC for a


useful for me. Iam working as Engineer in M/s. Vuram

Technology Solutions , Chennai, getting a salary of

Rs.18,000 per month. I Thank NSIC for giving me

this opportunity.

I Sree Charan N. did ” Engineering project at NSIC

for a period 11.1.2018 to 29.1.2018. This projects is

very useful for me. Iam working as Engineer in M/s.

TCS, Chennai, getting a salary of Rs.25,000 per month.


I Shruthy . did ” Engineering project at NSIC for a


useful for me. Iam working as System Engineer in M/s.

Infosys, Chennai, getting a salary of Rs.18,000 per


I Suraj Rajagopal . did ” Engineering project at NSIC

for a period 1.2.2018 to 21.2.2018. This projects is very

useful for me. Iam working as trainee in M/s. TCS

Chennai, getting a salary of Rs.3.5 lacs per annum. I


I M.Vijay did ” Engineering project at NSIC for a period

1.2.2018 to 21.2.2018. This projects is very useful for

me. Iam working as Semi voice in M/s. UTL Global

Solutions, getting a salary of Rs. 10,000 per month. I


I K. Sathya narayanan did ” Engineering project at NSIC

for a period 24.1.2018 to 12.2.2018. This projects is

very useful for me. Iam working as Executive Engineer in

M/s.Congnizant Chennai getting a salary of Rs. 3.25 lacs


I J. Sriram did ” Engineering project at NSIC for a period


me. Iam working as Data Associate in M/s.HCL

Technologies Chennai getting a salary of Rs. 22000 per


K.R. Visakan ” Engineering project at NSIC for a period


me. Iam working as Trainee in M/s.SRM Infotech Solutions

Chennai getting a salary of Rs. 15,000 per month. I Thank


I, B. Koushik ” Engineering project at NSIC for a period

1.3.2018 to 21.3.2018. This projects is very useful for me.

Iam working as Software engineer in M/s.TCS Chennai

getting a salary of Rs. 3.35 per annum. I Thank NSIC for


I, C. Gayathri ” Engineering project at NSIC for a period


me. Iam working as Data Analyst in M/s.Accenture

Chennai getting a salary of Rs. 16,000 per month. I


I, P. Sithra ” Engineering project at NSIC for a period


me. Iam working as Graduate Trainee in M/s.

Sutherlands Chennai getting a salary of Rs. 12,000 per


I, S. Abhinaya ” Engineering project at NSIC for a


useful for me. Iam working as Testing Engineer in

M/s. Flextronics Chennai getting a salary of Rs. 15,000

per month. I Thank NSIC for giving me this

opportunity.

I, Sathish Kumar J. ” Engineering project at NSIC for a


useful for me. Iam working as Data Associate in M/s.

Amazon India , Chennai getting a salary of Rs. 15,000 per


I, Sudhanva M.R. ” Engineering project at NSIC for a


useful for me. Iam working as Graduate Engineer Trainee

in M/s. Infor India Pvt Ltd. , Chennai getting a salary of


opportunity.

I, Swathi P. ” Engineering project at NSIC for a period


me. Iam working as Graduate Engineer Trainee in M/s.

Sutherland Global Services, Chennai getting a salary of


opportunity.

I, G.Sivamani did course in” CNC Turning ” at NSIC for

a period from from 3.7. 2017 to 24.8.2017. Iam

working as CNC Operator at M/s. Indian Psiton limited

, and getting a pay of Rs. 10,000/- per month. I thank

NSIC for giving me useful training.

I, L. Samson did course in” 3D Design Modeller ” at

NSIC for a period from 6. 3.2017 to 28.4.2017. I am

working as Supervisor at M/s. New Age Software

solution and getting a pay of Rs. 8,000/- per month. I

thank NSIC for giving me useful training.

I, A Ravindar did course in” CNC Turning ” at NSIC for a

period from 3.7. 2017 to 24.8.2017. Iam working as

Sales Executive at M/s. Godrek , Chennai, and getting a

pay of Rs. 9500/- per month. I thank NSIC for giving me

useful training.

I,P.Sundar did course in” CNC Turning” at NSIC for a

period from 3 .7. 2017 to 24.8.2017. Iam working as

Interior Designer at M/s. FMT Pvt ltd , and getting a

pay of Rs. 8500/- per month. I thank NSIC for giving

me useful training.

I, S.Prakash course in” CNC Turning” at NSIC for a

period from 3 .7. 2017 to 24.8.2017. Iam working as

Production Engineer at M/s. Brigh lite Pvt Ltd,

Chennai, and getting a pay of Rs. 12,000/- per month. I


I, James did course in” CNC Turning” at NSIC for a

period from 3 .7. 2017 to 24.8.2017 Iam working as

Assistant at M/s. Sanjay Engineering , Chennai, and

getting a pay of Rs. 10,000/- per month. I thank NSIC

for giving me useful training.

I, Ganeshkumar J did course in” 3D Design Modeller ” at

NSIC for a period from 6. 3.2017 to 28.4.2017. Iam

working as Technician at M/s. Sundaram Industries,

Sivakasi, and getting a pay of Rs. 10,000/- per month. I


I, M. Siva did course in” 3D Design Modeller ” at NSIC

for a period from 26. 4.2017 to 28.5.2017. Iam

working as Service Engineer at M/s. Westron

Solutions, Chennai and getting a pay of Rs. 12000/- per

month. I thank NSIC for giving me useful training.

I, S.Vigneswaran did course in” 3D Design Modeller ” at


working as Engineer-Control Room at M/s. Ocean

power plant, and getting a pay of Rs. 15000/- per


I L.Manikandan did course in” CNC Turning” at NSIC

for a period from 3 .7. 2017 to 24.8.2017. Iam working

as CNC operator at M/s.S.R.Engineering, Chennai, and

getting a pay of Rs. 8,000/- per month. I thank NSIC for

giving me useful training.

I, R.Maria Vishak did course in” CNC Turning ” at NSIC

for a period from 7. 8.2017 to 28.9.2017. Iam working

as Service Engineer at M/s. Westron Solutions,

Chennai and getting a pay of Rs. 12000/- per month. I


I, D. Balaji course in” CNC Vertical Machine Centre” at


working as Service Engineer at M/s. Gestamp

Automotive Chennai pvt ltd and getting a pay of Rs.

12000/- per month. I thank NSIC for giving me useful

training.

I, Anthony course in” CNC Vertical Machine Centre” at


working as Engineer at M/s. Roop International,

Seriperumbattur and getting a pay of Rs. 12000/- per


I, Bala Murugan course in” CNC Vertical Machine

Centre” at NSIC for a period from 6. 2.2017 to

28.4.2017. Iam working as Engineer at M/s. Auro

Technology , Thirumudivakkam and getting a pay of Rs.

12000/- per month. I thank NSIC for giving me useful

training.

I, Santhosh Kumar C. course in” CNC Vertical Machine


20.6.2017. Iam an Entreprenuer doing own business

Santhosh Workshop and getting a pay of Rs. 20000/-

per month. I thank NSIC for giving me useful training.

I, K. Manikandan course in” CNC Vertical Machine


20.6.2017. Iam as Engineer in M/s. Velam Engineering

Works, Chennai and getting a pay of Rs. 10000/- per


I, S. Thaufic course in” CNC Vertical Machine Centre” at


working as Engineer in M/s. Ezekiel realestate Maraimalai

nagar and getting a pay of Rs. 10000/- per month. I thank

NSIC for giving me useful training.

I, P. Kalidass course in” CNC Vertical Machine Centre” at


working as supervisor in M/s. Garuda Machining works,

Chennai and getting a pay of Rs. 10000/- per month. I


I, K. Venkatesan course in” CNC Vertical Machine


21.7.2017. Iam working as Engineer in M/s. Multitech

Engineering, Chennai and getting a pay of Rs. 12000/-

per month. I thank NSIC for giving me useful training.

I, S. Thiyagarajan course in” CNC Vertical Machine


24.8.2017. Iam working as Engineer in M/s.

Rajalakshmi Engineering works, Chennai and getting a

pay of Rs. 10000/- per month. I thank NSIC for giving me

useful training.

I, S. Thanigaivel course in” CNC Vertical Machine


24.8.2017. Iam working as Engineer in M/s.

Coromandal International Chennai and getting a pay of

Rs. 12,000/- per month. I thank NSIC for giving me

useful training.

IM. Sakthi Priyan course in” CNC Vertical Machine


24.8.2017. Iam working as Engineer in M/s. Universal

Engineers, Chennai and getting a pay of Rs. 12,000/- per


I, B. Umesh Kannan course in” CNC Vertical Machine


24.8.2017. Iam working as Technician in M/s. Supreme

Manufacturing Prur Chennai and getting a pay of Rs.

10,000/- per month. I thank NSIC for giving me useful

training.

I, S. Ganesh course in” CNC Vertical Machine Centre” at


working as Engineer in M/s. TVS Tyres, Chennai and



I, S.Sathish Kumar course in” CNC Vertical Machine Centre”

at NSIC for a period from 3. 7.2017 to 24.8.2017. Iam

working as Engineer in M/s. SMK Engineering , Padi,

Chennai and getting a pay of Rs. 10,000/- per month. I


I, K. Vinoth course in” CNC Vertical Machine Centre” at NSIC

for a period from 3. 7.2017 to 24.8.2017. Iam working as

Engineer in M/s. Ashok Leyland, Chennai and getting a pay

of Rs. 12,000/- per month. I thank NSIC for giving me useful

training.

I, D. Tamil mani course in” CNC Vertical Machine Centre” at


running own business as M/s. Tamilmani Hardwares and



I, V.Vipin Kumar course in” CNC Vertical Machine Centre” at

NSIC for a period from 3. 7.2017 to 24.8.2017. Iam working

as Engineer in M/s. Prime Industries, Karur and getting a

pay of Rs. 10,000/- per month. I thank NSIC for giving me

useful training.

I, V. Kavimuhil course in” CNC Vertical Machine Centre”

at NSIC for a period from 3. 7.2017 to 24.8.2017. Iam

working as Service Engineer in M/s. Hyundai Service

Centre and getting a pay of Rs. 10,000/- per month. I


I, Mohammed Suhail I course in” CNC Vertical Machine

Centre” at NSIC for a period from 7.8.2017 to

28.9.2017. Iam working as Trainee in M/s. Royal

Enfield and getting a pay of Rs. 10,000/- per month. I


I E. Mani Vannan course in” CNC Vertical Machine


28.9.2017. Iam working as supervisor in M/s. Naga

Fitting Tools Ambattur Chennai and getting a pay of Rs.


training.

I G. Dinesh Kumar course in” CNC Vertical Machine


28.9.2017. Iam working as Engineer in M/s. DPN

Tools Ambattur Chennai and getting a pay of Rs.


training.

I K. Dhanasekaran course in” CNC Vertical Machine


28.9.2017. Iam working as Engineer in M/s. Premier

Machine Tools Ambattur Chennai and getting a pay of

Rs. 12,000/- per month. I thank NSIC for giving me

useful training.

I R. Praveen course in” CNC Vertical Machine Centre”

at NSIC for a period from 7.8.2017 to 28.9.2017. Iam

working as supervisor in M/s. Excel Waterjet Cutting

Chennai and getting a pay of Rs. 10,000/- per month.

I thank NSIC for giving me useful training.

I M.V. Vishnu course in” CNC Vertical Machine Centre” at

NSIC for a period from 18.9.2017 to 10.11.2017. Iam

working as supervisor in M/s. Prasad NC Machine system

pvt ltd Chennai and getting a pay of Rs. 8,000/- per


I A. Sriraman course in” CNC Vertical Machine Centre” at


working as Engineer in M/s. Machine Tools Automation

and getting a pay of Rs. 8,000/- per month. I thank NSIC

for giving me useful training.

I R. Seshathri course in” CNC Vertical Machine Centre” at


working as Engineer in M/s. Sai Auto Components and



I M. Rishikesh course in” CNC Vertical Machine Centre” at


working as Engineer in M/s. Zetek Castings Chennai and



I Esakkimuthu S course in” Tool Designer” at NSIC for a

period from 6.2.2017 to 13.4.2017. Iam working as Site

Engineer in M/s. Win Group pvt ltd Chennai and getting a

pay of Rs. 10,000/- per month. I thank NSIC for giving me

useful training.

I Pradeep kumar course in” Tool Designer ” at NSIC for

a period from 6.2.2017 to 13.4.2017. Iam working as

Design Engineer in M/s. Grow Tech Innovations,

Bangalore Chennai and getting a pay of Rs. 12,000/- per


I, A. Krishna kumar did course in Programming and

operation in VMC ” at NSIC for a period from 8.11.2017

to 18.1.2018 . This course was very useful for me. Iam

working as operator in M/s.Eminent Engineering

getting a salary of Rs. 1.2lacs per annum. I Thank NSIC


I, R. Sasi Kumar did course in CATIA Software ” at NSIC


was very useful for me. Iam working as Quality Line

Inspector in M/s.Wonjin Auro Padrs India getting a

salary of Rs. 1.2lacs per annum. I Thank NSIC for giving


I, Thirumurugan N did course in Auto CAD Software ”

at NSIC for a period from 4.12.2017 to 4.1.2018 . This

course was very useful for me. Iam working as Quality

in M/s.Crostamp Automotive Pvt ltd. getting a salary of

Rs. 1.2lacs per annum. I Thank NSIC for giving me this

opportunity.

I, P. Mariadoss vinson did course in Auto CAD” at

NSIC for a period from 4.12.2017 to 4.1.2018 . This

course was very useful for me. Iam working as Mould

maker in M/s.Lalitha Enterprise getting a salary of

Rs. 1.2lacs per annum. I Thank NSIC for giving me

this opportunity.

I, C. Sundarapandian did course in CNC VMC

Programming” at NSIC for a period from 10.10.2017

to 7.12.2017 . This course was very useful for me. Iam

working as Junior Engineer in M/s.Delphi TVS

Sriperumbattur getting a salary of Rs. 1.5 lacs per

annum. I Thank NSIC for giving me this opportunity.

M. Arun Kumar did course in Auto cad” at NSIC for a

period from 8.11.2017 to 7.1.2018 . This course was very

useful for me. Iam working as Quality Line Inspector in

M/s.Delphi TVS Sriperumbattur getting a salary of Rs.


opportunity.

M. R. Praveen did course in Auto cad” at NSIC for a period


for me. Iam working as Machine Shop supervisor in M/s.

Kumaran Engineering Pvt Ltd getting a salary of Rs. 1.32

lacs per annum. I Thank NSIC for giving me this

opportunity.

I, M. Vignesh did course in CREO and CAD software” at

NSIC for a period from 6.3.2017 to 12.5.2017 . This course

was very useful for me. Iam working as PDI Inspector in

M/s. Esteem Polymers pvt ltd. , getting a salary of Rs.


opportunity.

I, K. Rajaram did course in Auto CAD software” at NSIC

for a period from 3.7.2017 to 24.8.2017 . This course was

very useful for me. Iam working as Quality COntrol in M/s.

Sadhan Tool Room Ltd Chennai , getting a salary of Rs.


opportunity.

I, P. Vignesh did course CNC Turning ” at NSIC for a


very useful for me. Iam working as Graduate Trainee in

M/s. Renault Nissan Chennai , getting a salary of Rs.


opportunity.

I, Bhrani Ganesh S did course Autocad ” at NSIC for a


very useful for me. Iam working as NDP Engineer in

M/s. Baleshwar Automobiles, Chennai , getting a salary

of Rs. 0.90 lacs per annum. I Thank NSIC for giving me

this opportunity.

I, M. Senthil did course Autocad ” at NSIC for a period

from 18.9.2017 to 10.11.2017 . This course was very

useful for me. Iam working as CNC Operator in M/s.

Rini Machine pvt Ltd Coimbatore , getting a salary of

Rs. 1.20 lacs per annum. I Thank NSIC for giving me

this opportunity.

I, S. Manoj Kumar did course Autocad ” at NSIC for a

period from 6.3.2017 to 28.4.2017. This course was

very useful for me. Iam working as System admn in

M/s. Intel system pvt ltd. Chennai , getting a salary of

Rs. 10000 per month. I Thank NSIC for giving me this

opportunity.

I, Shahul Hameed did course Tool Designer using CAM ”


course was very useful for me. Iam working as Trainee

in M/s. Cuuro Motors Chennai , getting a salary of Rs.


opportunity.

I, A. Thiruvel Kumaran did course CNC with Cad CAM ”

at NSIC for a period from 13.11.2017 to 12.12.2017 .

This course was very useful for me. Iam working as

Design Engineer in M/s. K.K. Permal and Company,

Chennai , getting a salary of Rs. 1.40 lacs per annum. I


I, P.N.Naseer Ahmed did course Auto Cad ” at NSIC for a

period from 13.9.2017 to 10.11.2017 . This course was very

useful for me. Iam working as Graduate Engineer Trainee in

M/s. KPT Power Tools, Chennai , getting a salary of Rs. 8000

per month. I Thank NSIC for giving me this opportunity.

I, Vikramanadh Sudhakar did course “CNC with Cad Cam ”


course was very useful for me. Iam working as Draughtsman

in M/s. Dakshin Plant Engineering Consultant pvt ltd.

Chennai , getting a salary of Rs. 1.80 lacs per annum. I


I, J. Rajasekaran did course “Autocad & Mastercam ” at

NSIC for a period from 7.8.2017 to 1.9.2017 . This course

was very useful for me. Iam working as Junior Engineer

(Assembly) in M/s. Pnue Tech Industries , getting a salary

of Rs. 8000 per month. I Thank NSIC for giving me this

opportunity.

I, M. Selvam did course “Autocad” at NSIC for a period


for me. Iam working as Autocad designer in M/s.

Greenland services pvt ltd , getting a salary of Rs. 10500

per month. I Thank NSIC for giving me this opportunity.

I, G.Palani did course “Autocad” at NSIC for a period


for me. Iam working as supervosir in M/s. Vezhi

Industrial Estate getting a salary of Rs. 8000 per month.


I, A.Rajakumar did course “Autocad” at NSIC for a


very useful for me. Iam working as Technician in M/s.

Super auto forging Chennai getting a salary of Rs.

15000 per month. I Thank NSIC for giving me this

opportunity.

I K.Ashok Kannan did course “Autocad” at NSIC for a


very useful for me. Iam working as Junior engineer in

DKS Steel Pvt Ltd getting a salary of Rs. 10000 per


I M. Maheshwaran did course “Autocad” at NSIC for

a period from 4.12.2017 to 25.1.2018 . This course

was very useful for me. Iam working as Marketing

executive in M/s. AC Care pvt ltd Chennai getting a

salary of Rs. 8500 per month. I Thank NSIC for giving


I M. Yoganath did course “Autocad” at NSIC for a

period from 4.12.2017 to 25.1.2018 . This course

was very useful for me. Iam working as Assistant in

M/s. Lloyed pvt ltd , Ambur Chennai getting a salary

of Rs. 8000 per month. I Thank NSIC for giving me

this opportunity.

I K.Subramani did course “Autocad” at NSIC for a


very useful for me. Iam working as Faculty in Maharaja

Engineering College, Coimbatore getting a salary of Rs.


opportunity.

I P.Perumal did course “Autocad” at NSIC for a


very useful for me. Iam working as Assembler in M/s.

Aqua Group Coimbatore getting a salary of Rs. 10500

per month. I Thank NSIC for giving me this

opportunity.

I K. Akilan did course “3D Design Modeller” at NSIC


was very useful for me. Iam working as Designer in

M/s. Design Desk India Pvt ltd, Chennai getting a

salary of Rs. 10000 per month. I Thank NSIC for


I A Suresh did course “3D Design Modeller” at NSIC


was very useful for me. Iam working as technician in

M/s.Design Tech system ltd, Chennai getting a salary

of Rs. 11000 per month. I Thank NSIC for giving me

this opportunity.

I G. Prakash did course “3D Design Modeller” at

NSIC for a period from 26.4.2017 to 21.6.2018 . This

course was very useful for me. Iam working as

technician in M/s.Axis Engineering ,Chennai getting

a salary of Rs. 12000 per month. I Thank NSIC for


I, Nithyaraj did course “CAD” at NSIC for a period

from 2.3.2018 to 3.3.2018 . This course was very

useful for me. Iam working as trainee in M/s.TVS

Sundaram Fastners ,Chennai getting a salary of Rs.


opportunity.

I, N. Rajapandiyan did course ” Auto CAD at NSIC for

a period from 1.2.2018 to 2.3.2018. This course was

very useful for me. Iam working as Assembly

maintenance in M/s. Titan Chennai getting a salary of


opportunity.

I, N. Rajapandiyan did ” Engineering Project in NSIC

for a period from 1.3.2018 to 21.3.2018. This project

was very useful for me. I got a job in IBM Bangalore

getting a salary of Rs. 18,000 per month. I Thank NSIC


I, J. Shyamala did ” Engineering Project in NSIC for a

period from 1.3.2018 to 21.3.2018. This project was

very useful for me. I got a job as Trainee in Accenture

Chennai getting a salary of Rs. 12,000 per month. I


I S. Srivarsha did ” Engineering Project in NSIC for a

period from 1.3.2018 to 21.3.2018. This project was

very useful for me. I got a job as Engineer in Infosys

Mysore getting a salary of Rs. 12,000 per month. I


I R. Ajay Krishnan did ” Engineering Project in NSIC

for a period from24.1.2018 to 12.2.2018. This project

was very useful for me. I got a job as Software

Engineer in Virtusa Hyderabad getting a salary of Rs.


opportunity.

I P.V. Indu did ” Engineering Project in NSIC for a

period from24.1.2018 to 12.2.2018. This project was

very useful for me. I got a job as Quality Analyst in

Amazon getting a salary of Rs. 15,000 per month. I


NSIC TECHNICAL SERVICES CENTRE, CHENNAI-32.

Success Stories -2

I V.P.Balaji did ” Advanced Integrated Entrepreneurship

Development Program” at NSIC for a period from 20.09.2017

to 31.10.2017. This course was very useful for me. Now I am

running a MSME unit called "Balaji toolcraft". I Thank NSIC for


I P.Jagadeesan did did ” Advanced Integrated

Entrepreneurship Development Program” at NSIC for a period

from 20.09.2017 to 31.10.2017. This course was very useful

for me. Now I am working in T. Nagar Times as DTP designer

and I am earning Rs 20000/-.per month. I Thank NSIC for

giving me an opportunity.

I Santhosh did course in” Image processing using Raspberry

pi” at NSIC for a period from 11.10.2017 to 10.11.2017. This

course was very useful for me. Now I am working in M/s. Point

Perfect Technology Services, Coimbatore as Desktop support

engineer and getting a pay of Rs.15000/-p.m. I Thank NSIC for


I S.Perumal Swamy did course in” Field Technician -UPS ” at

NSIC for a period from 6.3.2017 to 21.4.2017. This course was

very useful for me. Now I am working in M/s. Accel Frontline

Private Limited. Chennai , as Senior IT support engineer and

getting a pay of Rs.25,000/-p.m. I Thank NSIC for giving me

this opportunity.

I C.Sundara pandian did” Advanced Integrated


from 20.09.2017 to 31.10.2017. This training was very useful

for me. Now I am working in M/s. JBM Auto systems. Chennai ,

as supervisor and getting a pay of Rs.16,000/-p.m. I Thank


I M.Manjula Devi did ” Advanced Integrated

Entrepreneurship Development Program” ” at NSIC for a

period from 20.09.2017 to 31.10.2017. This training was

very useful for me. Now I am working in Sharaba

constructions, Chennai and I am earning Rs 15000/- per

month. I Thank NSIC for conducting good course.

I K.RadhaKrishnan did ” Advanced Integrated



very useful for me. Now I am working in "PET bottle

Manufacturing"as operator and I am earning Rs 11000/- per


I A.Patha kumar did ” Advanced Integrated



very useful for me. Now I am running a business called

"QNET". I Thank NSIC for conducting good course.

I V.Pradeeb did ” Advanced Integrated Entrepreneurship

Development Program” ” at NSIC for a period from

20.09.2017 to 31.10.2017. This training was very useful for

me. Now I am working in Maersk Liner Pvt. Ltd, Chennai and

I am earning Rs 15000/- per month. I Thank NSIC for

conducting good course.

I G.Dhiwakar did ” Advanced Integrated Entrepreneurship



me. Now I am working as Interiors designer and I am earning

Rs 15000/- per month. I Thank NSIC for conducting good

course.

I C.Nevaraj did ” Advanced Integrated Entrepreneurship



me. Now I am working in "Chennai Radha Pvt Ltd" and I am

earning Rs 12000/- per month. I Thank NSIC for conducting

good course.

I M.Kalaivanan did ” Advanced Integrated Entrepreneurship

Development Program” ” at NSIC for a period from 20.09.2017

to 31.10.2017. This training was very useful for me. Now I am

working in"Vasantha Mohana Rangaa Siddha Medical

Center "as siddha doctor and I am earning Rs 11000/- per


I D.Suresh Babu did ” Advanced Integrated Entrepreneurship



working in "Orbit Systems" as Service engineer and I am


good course.

I V.Muthukumar did ” Advanced Integrated Entrepreneurship



working in "VK Enterprises"as Proporiter and I am earning Rs

15000/- per month. I Thank NSIC for conducting good course.

I S.Vinoth Kumar did ” Advanced Integrated Entrepreneurship



working in "Hanika Trading & Adavnce Systems" and I am


good course.

.

I K.Therasal did ” Advanced Integrated Entrepreneurship



working in "Herba Health Pharma Naturals" and I am earning

Rs 12000/- per month. I Thank NSIC for conducting good

course.

I M.Karpagavalli did ” Advanced Integrated Entrepreneurship



working in "GV Gem and Jewel" and I am earning Rs 11500/-

per month. I Thank NSIC for conducting good course.

I G.Govindarajan did ” Advanced Integrated



very useful for me. Now I am working in "Suriyan

Enterprises" and I am earning Rs 12000/- per month. I

Thank NSIC for conducting good course.

I J.Vians Xavier did ” Advanced Integrated



very useful for me. Now I am working in "Rabkoot

International Ltd" and I am earning Rs.12000/-per month. I


I V.Thangavelu did ” Advanced Integrated



very useful for me. Now I am working in "Accenture

Solutions" as Image processing Analyst and I am earning

Rs.15000/-per month. I Thank NSIC for conducting good

course.

I K.Jaivelu did ” Advanced Integrated Entrepreneurship



me. Now I am working in "Q Power Technology" and I am

earning Rs.13000/-per month. I Thank NSIC for conducting

good course.

I J.David Raj did ” Advanced Integrated Entrepreneurship



me. Now I am working in "Moses telecom" and I am earning

Rs.15000/-per month. I Thank NSIC for conducting good

course.

I Y.Venkateswarlu did ” Advanced Integrated



very useful for me. Now I am working in "TT Aviation"andI

am earning Rs.12000/-per month. I Thank NSIC for

conducting good course. I R.G.Rajkumar did ” Advanced Integrated

Entrepreneurship Development Program” at NSIC for a


very useful for me. Now I am working in "Hyundai Engg and

Construction " as Quality inspector and I am earning

Rs.1,00000/-per month. I Thank NSIC for conducting good

course.

I K.Karthik did ” Advanced Integrated Entrepreneurship

Development Program” at NSIC for a period from


me. Now I am working as a freelancer in the field of

"Electrical panel manufacturing" and I am earning

Rs.25000/-per month.


I Juli Margaret did ” Advanced Integrated



very useful for me. Now I am running a MSME Unit called

"Ram Enterprises"and I am earning Rs.13000/-per month. I


I C.Selvakumar did ” Image processing using Raspberry pi” at

NSIC for a period from 22.01.2018 to 21.02.2018. This training

was very useful for me. Now I am running a company called as

"Photon Energy Solutions" and I am earning Rs.25000/-per

month.

I R.Swamynathan did course in” Field Technician

(UPS&Inverter)” at NSIC for a period from 06.03.2017 to

21.04.2017. This course was very useful for me. Now I am

working in M/s. Exide Industries Ltd, Chennai as Support

engineer and getting a pay of Rs.20000/-p.m. I Thank NSIC


G.Rajeshkumar did course in” Field Technician



working in M/s. GRK Creations, Chennai as Engineer and

getting a pay of Rs.15000/-p.m. I Thank NSIC for giving me

this opportunity.

G.Mareeswaran did course in” Field Technician



working in M/s. Exide Industries Ltd, Chennai as Support

engineer and getting a pay of Rs.20000/-p.m. I Thank NSIC


N.Pathmanaban did course in” Field Technician



working in M/s. L&T, Chennai as Engineer and getting a pay

of Rs.20000/-p.m. I Thank NSIC for giving me this

opportunity.

I P.Lakshmi Narayanan did ” Advanced Integrated



very useful for me. Now I am running a MSME Unit called

"Jhanu Global Services" and I am earning Rs.3.5 lakhs per

annum. I Thank NSIC for conducting good training

programs.

I P.Sai Ganesh did ” Advanced Integrated



very useful for me. Now I am working as Operations Head in

"Technomical Engineering Pvt Ltd" and I am earning Rs.8.5

lakhs per annum. I Thank NSIC for conducting good training

programs.

I S.Suresh Kumar did ” Advanced Integrated



very useful for me. Now I am working as Driver in "Kumars

Travels" and I am earning Rs.4 lakhs per annum. I Thank

NSIC for conducting good training programs.

I A.Maria Susai did ” Advanced Integrated



very useful for me. Now I am working as Web designer in

"Samuel Info Tech" and I am earning Rs.2 lakhs per annum.

I Thank NSIC for conducting good training programs.

I K.Narayanasamy did ” Advanced Integrated


from 30.10.2017 to 12.12.2017. This training was very useful for

me. Now I am running a shop called "L.N.Tailoring" and I am

earning Rs.1.2 lakhs per annum. I Thank NSIC for giving me this

opportunity.

I S.Rajasekar did ” Advanced Integrated Entrepreneurship

Development Program” at NSIC for a period from 30.10.2017 to

12.12.2017. This training was very useful for me. Now I am

working as assistant in "Ultra Tech" and I am earning Rs.1.2 lakhs


I T.Magesh did ” Advanced Integrated Entrepreneurship



working as Manager in "Sai Ram Party hall" and I am earning Rs.3

lakhs per annum. I Thank NSIC for giving me this opportunity.

I Nidhi Somani did ” Advanced Integrated Entrepreneurship



working as Store Manager in "SURUCMI, Amul Scooping Parlour"

and I am earning Rs.5 lakhs per annum. I Thank NSIC for giving


I M.Dinesh did ” Advanced Integrated Entrepreneurship

Development Program”” at NSIC for a period from 20.09.2017 to


running a business called "Unick Xports" and I am earning Rs.5

lakhs per annum. I Thank NSIC for conducting good training

program.

I Jayaprakash did ” UPS/Inverter design” at NSIC for a period


me. Now I am running a business called "AS Ventures" and I am

earning Rs.5 lakhs per annum. I Thank NSIC for conducting good

training program.

I Ajith Kumar M did ”Advanced Integrated Entrepreneurship

Development Program” ” at NSIC for a period from 08.01.2018 to


working as executive in "HDSC Technologies" and I am earning

Rs.2.2 lakhs per annum. I Thank NSIC for conducting good

training program.

I K.Radha Krishnan did ”Advanced Integrated

Entrepreneurship Development Program” ” at NSIC for a period


me. Now I am working as Machine Operator in "PET Bottle

Manufacturing LTD" and I am earning Rs.1.8 lakhs per annum. I

Thank NSIC for conducting good training program.

I Dheebagan N did ” Advanced Integrated Entrepreneurship

Development Program” at NSIC for a period from from

08.01.2018 to 17.02.2018. This training was very useful for me.

Now I am working as an executive in "SFL" and I am earning

Rs.2.7 lakhs per annum. I Thank NSIC for giving me this

opportunity.

I K.K. Raveena did ” Advanced Integrated Entrepreneurship



Now I am working as an executive in "Amazon" and I am earning


opportunity.

I Madhu Shree V did ” Advanced Integrated Entrepreneurship



Now I am working as an executive in "Tech Mahendra" and I am

earning Rs.2.7 lakhs per annum. I Thank NSIC for giving me this

opportunity.

I M.Kowsalya did ” Advanced Integrated Entrepreneurship



Now I am working as an executive in "Intel Net" and I am earning


opportunity.

I K.Karthik did ”Advanced Integrated Entrepreneurship



working as Techinician in "Excel power switchgear" and I am

earning Rs.3.2 lakhs per annum. I Thank NSIC for conducting

good training program.

I N. Gayathri did ” Advanced Integrated Entrepreneurship



Now I am working as an executive in "Skoruz" and I am earning


opportunity.

I V.Muthukumar did ”Advanced Integrated Entrepreneurship



running business called "VK Enterprises" and I am earning

Rs.1.80 lakhs per annum. I Thank NSIC for conducting good

training program.

I G.Divakar did ”Advanced Integrated Entrepreneurship



running business called "D shades" and I am earning Rs.2.8 lakhs

per annum. I Thank NSIC for conducting good training program.

I S.Vinoth kumar did ”Advanced


31.10.2017. This training

running business called "Hanika Trading Advance System

am earning Rs.5 lakhs per annum


I Reka Mukund did ”Advanced



running business called "Cupa Cake" and

per annum. I Thank NSIC for conducting good training program.

I K.Therasal did ”Advanced



running business called "Vasanth maharangan Siddha Hospital"

and I am earning Rs.5

conducting good training program.

I M.Karpagavalli did ”Advanced



running business called "GV Gem & Jewel Hub" and

Rs.3.5 lakhs per annum. I Thank NSIC

training program.

I S.Rajeshwari did ”Advanced



running business called "Krithick Leathers" and

Rs.4.8 lakhs per annum. I Thank NSIC

training program.

Advanced Integrated Entrepreneurship

” at NSIC for a period from 20.09.2017 to

training was very useful for me. Now I am

Hanika Trading Advance System" and I

Rs.5 lakhs per annum. I Thank NSIC for conducting




running business called "Cupa Cake" and I am earning Rs.5 lakhs

for conducting good training program.




running business called "Vasanth maharangan Siddha Hospital"

Rs.5 lakhs per annum. I Thank NSIC for





running business called "GV Gem & Jewel Hub" and I am earning

. I Thank NSIC for conducting good




running business called "Krithick Leathers" and I am earning

. I Thank NSIC for conducting good

I R. Manigandan did ”UPS, lnverter Basic electronics” at NSIC

for a period from 05.09.2017 to 05.11.2017. This training was

very useful for me. Now I am working as Sales Promoter in

“Samsung India" and I am earning Rs.3.2 lakhs per annum. I


I K.Venkatesan did ”Advanced Integrated Entrepreneurship



working as PD Executive in “Rajalakshmi Automobile" and I am

earning Rs.2.2 lakhs per annum. I Thank NSIC for conducting


I M. Mohana Sundaram did ”E-CAD ” at NSIC for a period from


Now I am working as Technical Engineer in “Plant control and

automation Technologies" and I am earning Rs.3.2 lakhs per

annum. I Thank NSIC for conducting good training program.

I Sai Hari Krishna did ”Certified PLC Programmer” ” at NSIC for a

period from 05.07.2017 to 05.08.2017. This training was very

useful for me. Now I am working as Technical Engineer in

“Nilpeter India Pvt LTD" and I am earning Rs.3.2 lakhs per


I M.Madhubalan did ”Certified PLC Programmer” ” at NSIC for a


useful for me. Now I am working as Technical Engineer in “POSH

Automats" and I am earning Rs.2.2 lakhs per annum. I Thank

NSIC for conducting good training program.

I P.Arun did ”Certified Automation Engineer” ” at NSIC for a


useful for me. Now I am working as Maintainence Engineer in

“Savola foods Arabia" and I am earning Rs.5 lakhs per annum. I


.

I A.Parthiban did ”Solar PV System and Technology ” ” at NSIC


very useful for me. Now I am running business called "Cathers"

and I am earning Rs.3 lakhs per annum. I Thank NSIC for


I Dr.J.Ramya did ”Raspberry PI Python” ” at NSIC for a period


me. Now I am working as Associate Professor in “St.Joseph

Engineering College" and I am earning Rs.5 lakhs per annum. I


.

I Dr.P.Tamilselvi did ”Raspberry PI Python” ” at NSIC for a


useful for me. Now I am working as Associate Professor in

“Jeppiaar Engineering College" and I am earning Rs.5 lakhs per


.

I E.Fenil did ”Raspberry PI Python” ” at NSIC for a period from


Now I am working as Assistant Professor in “Jeppiaar



.

I A.Godwin did ”Raspberry PI Python” ” at NSIC for a period


me. Now I am working as Assistant Professor in “Jeppiaar


Thank NSIC for conducting good training program..

I S.Pandiyan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technical Assistant in

“Rajalakshmi Electricals" and I am earning Rs.96 thousand per


I S.Prasanthi did ”Refrigeration and Air Conditioning” at NSIC



“SPM Electronics" and I am earning Rs.80 thousand per annum. I

Thank NSIC for conducting good training program

I G.Vishnu did ”Refrigeration and Air Conditioning” at NSIC for

a period from 12.02.2018 to 23.03.2018. This training was very

useful for me. Now I am working as Assistant in “Rasi

Electricals" and I am earning Rs.96 thousand per annum. I Thank

NSIC for conducting good training program

I P.Venkatesan did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Assistant in

“Wheels India Pvt Ltd" and I am earning Rs.1.08 lakh per annum.

I Thank NSIC for conducting good training program

I S.Jayaseelan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technician in “Honest

traders" and I am earning Rs.1.2 lakhs per annum. I Thank NSIC

for conducting good training program

I V.Vignesh did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Operator in “S.P.M.

Electronics" and I am earning Rs.96 thousand per annum. I Thank


I R.Movin did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Technical Assistant in

“Senthil Electrical Works" and I am earning Rs.96 thousand per

annum. I Thank NSIC for conducting good training program

I T.Revathi did ”Refrigeration and Air Conditioning” at NSIC



“Raj Electricals" and I am earning Rs.72 thousand per annum. I


I S.Saraswathi did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technician in “Arun



I M.Saravanan did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technical operator

in “Karuna Electricals" and I am earning Rs.96 thousand per


I K.Muniyappan did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technical Assistant

in “Senthil Electrical Works" and I am earning Rs.96 thousand per


I V.Sandhiya did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Trainee in “Malar



I M.Pathma did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Trainee in “Malar



I S.Rajesh did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Job Work in “Venkatesan

Contractor" and I am earning Rs.72 thousand per annum. I Thank


I R.Saravanan did ”Refrigeration and Air Conditioning” at NSIC



“Ganesh Electricals" and I am earning Rs.84 thousand per annum.


I K.Arunachalam did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technical Assistant

in “Rasi Electricals" and I am earning Rs.96 thousand per annum.


I R.Karuna did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technician in “Rasi



I M.Prabhakaran did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technician in

“Rajalakshmi Electricals" and I am earning Rs.96 thousand per


I N.Nadeem did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Assistant in “Sri Ganesh

Electricals & Rewinding Works" and I am earning Rs.90 thousand

per annum. I Thank NSIC for conducting good training program

I S.Balamurugan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technicial Assistant in

“Arun Electricals" and I am earning Rs.72 thousand per annum. I


I R.Jaiganesh did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Technician in “Pallavan

Rewinding " and I am earning Rs.96 thousand per annum. I


I S.Manikandan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Assistant in “Dhansekar

Electricals & Plumbing works" and I am earning Rs.96 thousand


I K.Vallarasu did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Technical Assistant in “Jayam



I B.Arul did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Technician in “Sri Ganesh

Electricals & Rewinding Works " and I am earning Rs.96

thousand per annum. I Thank NSIC for conducting good training

I M.Vijaya raghavan did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Tools operator in

“National Electricals & tools" and I am earning Rs.72 thousand


I R.Manikandan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technician in “Govind



I J.Janaki did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in “Saraswathy

enterprise Schooling" and I am earning Rs.70 thousand per


I K.Sathya did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Technician in “Sri Kumaran

Traders" and I am earning Rs.70 thousand per annum. I Thank


I A.Munavar khan did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Assistant in “RVS

Electricals Works" and I am earning Rs.72 thousand per annum. I


I E.Mahalakshmi did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Trainee in “Raj



I A.Poovarasan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technician in “Ranga



I M.Pandiyan did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as worker in “Texmo Industries"

and I am earning Rs.96 thousand per annum. I Thank NSIC for

conducting good training program

I M.Chinnarasu did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Assistant in “Madhan



I M.Yuvaraj did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Technical Assistant in

“Karthik Rewinding Works" and I am earning Rs.96 thousand per


I D.Kavimaran did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technicial assistant in

“Senthil Electrical works " and I am earning Rs.96 thousand per


I E.Chitra did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in “KBS Mobiles &

services" and I am earning Rs.96 thousand per annum. I Thank


I M.Vithya did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in “Arun Electricals"



I D.Gnanaprakash did ”Refrigeration and Air Conditioning” at



“Ranga Electricals" and I am earning Rs.96 thousand per annum. I


I A.Vignesh did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in “Ganesh



I R.Vignesh did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Technician in “Ranga



I S.Vinitha did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in “Ranga



I V.Mani did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Technician in “SPM

Electronics and I am earning Rs.96 thousand per annum. I Thank


I R.Saravanan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as labour in “S.M.Ishmail

wiring contractor " and I am earning Rs.84 thousand per annum.


I C.Sarath kumar did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Assistant in “Sri

Lakshmi rewinding works " and I am earning Rs.90 thousand per


I S.Durai murugan did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technician in “KBS

Mobiles sales and servies" and I am earning Rs.96 thousand per


I S.Vigneshwaran did ”Refrigeration and Air Conditioning” at



“Arun Electricals" and I am earning Rs.90 thousand per annum. I


I E.Sathish did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in ” Raj Electricals"



I T.Raheev Gandhi did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Technical assistant

in “RVS Electricals" and I am earning Rs.86 thousand per annum.


I S.Ranjith kumar did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as Trainee in

“S.M.Ishmail wiring contractor " and I am earning Rs.96 thousand


I P.Vijaya athikrishna did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as operator in

“Bismilla refrigeration sales and service" and I am earning Rs.84

thousand per annum. I Thank NSIC for conducting good training

program

I K.Kaviarasan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technial operarator in

“Ganesh Electricals" and I am earning Rs.84 thousand per


I R.Siva murugan did ”Refrigeration and Air Conditioning” at



“Texmo industries " and I am earning Rs.90 thousand per annum.


I M.Kodiarasan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technician in “RVS

Electrical WORKS " and I am earning Rs.96 thousand per annum.


I P.Ragul did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as operator in “Karthik

rewinding works " and I am earning Rs.96 thousand per annum. I


I P.Manikandan did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Trainee in “Govind



I M.Ramya did ”Refrigeration and Air Conditioning” at NSIC for a


useful for me. Now I am working as Trainee in “Arun Electricals"



I G.Vasantharaj did ”Refrigeration and Air Conditioning” at NSIC


very useful for me. Now I am working as Technical assistant in

“Rajan Electricals" and I am earning Rs.96 thousand per annum.


I A.V.R. Praveen did ”E-CAD” at NSIC for a period from


me. Now I am working as Technician in "Plant control and

Automation Technologies" and I am earning Rs.1.2 Lakhs per


I Habeeb AC Faheem.R did ”E-CAD” at NSIC for a period from


me. Now I am working as Assistant Engineer in “Krishna

Energy private Ltd." and I am earning Rs.2.2 Lakhs per annum.


I P.Chudarmuthu did ”PLC and SCADA” at NSIC for a period


for me. Now I am working as Technical assistant in “Siri

Power System" and I am earning Rs.1.8 Lakhs per annum. I


I N.Prithvirajan did ”UPS and Inverter” at NSIC for a period


for me. Now I am working as Technical assistant in “Origin

ITFS" and I am earning Rs.1.2 Lakhs per annum. I Thank


I Ramki did ” UPS and Inverter” at NSIC for a period from


Now I am working as Technical assistant in “K & N electro

techtronix" and I am earning Rs.1.8 Lakhs per annum. I Thank


I E.Meganathan did ” PLC ” at NSIC for a period from


Now I am working as Technical assistant in “SNJ distilling

Private Limited" and I am earning Rs 2.5 Lakhs per annum. I


I M.Jawahar did ” PLC ” at NSIC for a period from 12.11.2017


working as Technical assistant in “Kerthi Electronics" and I

am earning Rs 1.2 Lakhs per annum. I Thank NSIC for


I Thiripura Sundari did ” PLC & Scada” at NSIC for a period


for me. Now I am working as Assistant in "Muthu Financial

Corporation" and I am earning Rs 1.2 Lakhs per annum. I


I Arun did ” PLC & E-CAD ” at NSIC for a period from 06.01.18


working as Technical assistant in “savola foods Arabia" and I

am earning Rs 2.2 Lakhs per annum. I Thank NSIC for


I Sarath Kumar did ” PLC ” at NSIC for a period from


me. Now I am working as Technical assistant in “RARA

groups" and I am earning Rs 1.2 Lakhs per annum. I Thank


I Jayanthi did ” PLC & Scada ” at NSIC for a period from


me. Now I am working as Technical assistant in “Shankaran

A.S. Academy" and I am earning Rs 1.2 Lakhs per annum. I


I Parthiban did ” Field Technicia ” at NSIC for a period from


me. Now I am working as Relationship Officer in “Axis Bank"

and I am earning Rs 2.2 Lakhs per annum. I Thank NSIC for


I Shyam Sundar did ” E-CAD ” at NSIC for a period from

09.01.2017 to 24.02.2017 This training was very useful for

me. Now I am working as Assistant Manager in “UDS private

Limited" and I am earning Rs 6.5 Lakhs per annum. I Thank


I Guru Sankar did ” E-CAD ” at NSIC for a period from


me. Now I am working as Electrical Enginnering “Casagrand

Property care" and I am earning Rs .2.2 Lakhs per annum. I


I Saravanan did ” Android ” at NSIC for a period from


me. Now I am working as Contractor in “Business" and I am

earning Rs 1.25 Lakhs per annum. I Thank NSIC for


I Mukesh kumar did ” E-CAD ” at NSIC for a period from


me. Now I am working as HVAC technician in " Chennai

Airport" and I am earning Rs 1.9 Lakhs per annum. I Thank


I Mohamed Marwan did ” PLC ” at NSIC for a period from


me. Now I am working as technician in “NAFFCO" and I am

earning Rs1.8 Lakhs per annum. I Thank NSIC for conducting

good training program

I Prema V. did course in Engineering project ” at NSIC for a


for me. Now I am working in M/s. Infosys Mysore , as Engineer



I Tharani. V did ” Advanced Integrated Entrepreneurship

Development Program” at NSIC for a period from 1/12/2017 to

11/01/2018. This training was very useful for me. Now I am

working as an executive in "Somersit" and I am earning Rs.3.5


I M.Purusothaman did ”Refrigeration and Air Conditioning” at



“Malar Electricals" and I am earning Rs.96 thousand per annum.


I P.Ponmalar did ”Refrigeration and Air Conditioning” at NSIC for


useful for me. Now I am working as Technician in “ Krishna



I K.Sujith Kumar did ”Refrigeration and Air Conditioning” at


was very useful for me. Now I am working as assistant in “Sri

kumaran traders " and I am earning Rs.86 thousand per annum. I


I David Isaac did ” Advanced Integrated Entrepreneurship

Development Program” at NSIC for a period from 1/12/2017 to

11/01/2018. This training was very useful for me. Now I am

working as HOD in "SRM university" and I am earning Rs.7.7


--------------------------------------------------------------------------------------------------------------------

I A.Raja did course in” Solar” at NSIC for a period from

9.4.2018 to 20.4.2018. This course was very useful for me. Now

I am working in M/s. Accenture as Desktop support engineer



I Sai Hari Krishan did course in”PLC” at NSIC for a period from

5.7.2017 to 5.8.2017. This course was very useful for me. Now I

am working in M/s. Nilpitl India Pvt Ltd as Engineer and

getting a pay of Rs.15000/-p.m. I Thank NSIC for giving me

this opportunity.

NSIC TECHNICAL SERVICES CENTRE, CHENNAI -32. · Timber company Chennai getting a salary of Rs. 8000 per month. I Thank NSIC for giving me this opportunity. I N.S. Sarunyan course

Documents