Top Banner
CB 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing – an Introduction to Prof Bifano’s Laboratory and the Project Dynamic Surface Interferometry Jesus D. Ramos Peña University of Puerto Rico-Mayagüez/ Electrical Engineering Prof. Thomas Bifano Mechanical Engineering
11

NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

Jun 03, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

CB! 1

I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs

NSF REU in Integrated Nanomanufacturing – an Introduction to Prof Bifano’s Laboratory and the

Project Dynamic Surface Interferometry

Jesus D. Ramos Peña University of Puerto Rico-Mayagüez/Electrical Engineering Prof. Thomas Bifano Mechanical Engineering

Page 2: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

My Story !  High School:

Colegio Santa Cruz, Trujillo Alto P.R. !  College Process:

Applied and attended University of Puerto Rico- Bayamon for two years. Performed transfer program to University of Puerto Rico- Mayagüez

!  Current Mayor: Electrical Engineering

!  I received an email from one of my professors to apply for REU.

2

Introduction NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 3: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

3

What Influenced Me?

!  What influenced my decision to go into this field was an interest in science and technology, also a desire to move my family forward.

!  Now that I am in the field I enjoy it but it has been hard to decide what I want to specialize in. There are so many options.

Influences NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 4: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

4

Previous Experience

!  Engineering Intern – Puerto Rico Aqueduct & Sewer Authority. - Performance analysis on motors and pumps - Optimize equipment performance, specifications and order system

Research Experience NSF REU INM Introductory Day for RET Participants - July 6, 2015

!  IAP (Industrial Affiliates Program)- Undergraduate Research - Design of an assistance robot for picking up the trash inside caves to make the task less dangerous and more cost efficient.

Page 5: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

This Summer’s Research Experience

!  Precision Engineering Research Laboratory (PERL) on the 7th floor of the Photonics Center

!  At first it was hard to understand optics terms. I learn something new everyday. !  I'm looking to have an experience I would have not been able to obtain anywhere

else where I can gain useful research and project management tools that will help me in the future.

!  I though I wanted to go into industry but this experience so far has made me start to reconsider my options.

5

Summer Research NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 6: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

Summer Research Goals Dynamic Surface Interferometry !  Build, with Sarah Taoudi, a partitioned aperture wavefront (PAW)

reflective optical surface mapping instrument that will be able to measure topography at high speed on any continuous surface with nanometer-scale precision

!  We began constructing the microscope that included a PAW lens to be able to perform PAW imaging.

6

Summer Research Goals NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 7: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

Summer Research Goals

Presently !  We are working on getting the best possible image with the PAW

microscope. !  These images present the surface height of the object we are observing. !  We are comparing these images with the ones we acquire using the

Zygo NT 600 Dynamic Interferometer. Which gives a more precise image.

7

Summer Research Goals NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 8: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

Summer Research Goals

Goal of the project !  Successfully build a good prototype of the PAW reflective optical

mapping instrument for Thorlabs to consider it as a possible commercial product.

!  Measure the mechanical response of a small deformable mirror (DM) segment that can be moved by applying voltage to one or more of three underlying electrostatic actuators.

8

Summer Research Goals NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 9: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

The Instrument So Far.

9

I/UCRC CBSS NSF REU Supplement Introductory Presentation – June 2012

Page 10: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

!  Feel welcomed, people here want to help. !  I never felt like a stranger, everyone welcomed me with open arms and

are there to help with anything you need. !  By the second week I already felt settled and part of a lab group. All my

questions have been answered and my desire to learn is only growing.

10

REU, 4 Weeks Later…

Positives and Negatives NSF REU INM Introductory Day for RET Participants - July 6, 2015

Page 11: NSF REU in Integrated Nanomanufacturing – an Introduction ...€¦ · 1 I/UCRC CBSS New Proposal Presentation – April 2012 Update on FY2007 programs NSF REU in Integrated Nanomanufacturing

Thanks and Welcome !!

11

I/UCRC CBSS NSF REU Supplement Introductory Presentation – June 2012