NS-55E560dddA11_11-0573_MAN_V3_EN_Final_lr

55" LED-LCD, 1080p

NS-55E560A11

User Guide

ii

Contents

CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Introduction Features . . .

Installing the Installing theInstalling a w

TV componenAccessories Front . . . . . . Side . . . . . . . Back . . . . . . Remote con

Using the remInstalling remAiming the rProgramminProgramminCommon un

Making conneConnecting Connecting Connecting Connecting Connecting Connecting Connecting Connecting Connecting Connecting

Turning on yo

UnderstandinTurning youSelecting theSelecting a cAdjusting thViewing chaUsing the eleOn-screen mNavigating twww.insigniaproducts.com

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

stand or wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4all-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6trol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7ote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

emote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8g universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8g a different universal remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8iversal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

ctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9an antenna or cable TV without a cable box . . . . . . . . . . . . . . . . . . . . . . . . . 9a cable or satellite box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10a component video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11a camcorder or game console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12a digital sound system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13an analog (stereo) sound system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ur TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

g the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14r TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

hannel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14e volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14nnel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14ctronic program guide (EPG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14enu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15he menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Contents

Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Adjusting sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Selecting the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Locking control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Blocking a vSetting pareDownloadin

Using closed cUsing closedCustomizing

Adjusting timManually setSetting the s

Adjusting meSelecting theRestoring se

Maintaining .

Troubleshoot

Specifications

Legal notices

Two-year limiUS and Canaiiiwww.insigniaproducts.com

ideo input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ntal control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21g rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

aptioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 digital closed captioning styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

e settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27ting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27leep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

nu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 menu language and transparency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ttings to the defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

ted warranty - Insignia Televisions . . . . . . . . . . . . . . . . . . . . . . . .31da Markets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

iv

Contentswww.insigniaproducts.com

As you enjoy your new product, keep these safety tips in mind

The issueThe home thpurchases. Haccording to industry are cTVs that are incarts may fall

Tune into safet One size

rated for Carefully

for prope Dont let

system fu Dont pla

steps, su Rememb

watchingMake surbe pushe

Make surcannot b

Wall mountingIf you decide One size

your TV amanual,

Follow al If you ha

professio Make sur

approprimountedyou are u

TVs can b

f

CHILD SAFETYIt makes a difference how and where you use

your flat panel display1www.insigniaproducts.com

eater entertainment experience is a growing trend, and larger TVs are popular owever, TVs are not always supported on the proper stands or installed the manufacturers recommendations. We and the consumer electronics ommitted to making home entertainment enjoyable and safe.appropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or

over and cause injury.

y of TV stand does not fit all. Use only a TV stand the weight of your TV. read and understand all enclosed instructions r use of this product.

children climb on or play with entertainment rniture and TVs.ce TVs on furniture that can easily be used as

ch as a crate or chest of drawers.er that children can become excited while a program, especially on a larger-than-life TV. e that you place or install the TV where it cannot d, pulled over, or knocked down.e that you route all cords and cables so that they e pulled or grabbed by curious children.

to wall mount your TV, always remember: of wall mount does not fit all. Use only a wall mount rated for the weight of nd that has been recommended by this TV manufacturer, listed in this

or otherwise listed by an independent laboratory as suitable for your TV.l instructions supplied by the TV and wall mount manufacturers.ve any doubts about your ability to safely wall mount your TV, get help from a nal installer.e that the wall where you are mounting the TV is ate. Some wall mounts are not designed to be to walls backed with steel studs or cinder blocks. If nsure, ask a professional installer.e heavy. At least two people are required for safe wall mount installation.

2NS-55E560A11

Important safety instructions

1 Read these instru2 Keep these instru3 Heed all warnings4 Follow all instruct5 Do not use this ap6 Clean only with a7 Do not block any

accordance with tinstructions.

8 Do not install nearadiators, heat regapparatus (includheat.

9 Do not defeat thepolarized or grouplug has two bladother. A groundinand a third grounthe third prong athe provided plugconsult an electriobsolete outlet.

10 Protect the powepinched particulareceptacles, and tthe apparatus.

11 Only use attachmthe manufacturer

12 Use only with a cabracket, or table smanufacturer, or apparatus. Whencaution when mocart/apparatus cotip-over.

13 Unplug this appaor when unused f

14 Refer all servicingServicing is requibeen damaged inpower-supply corhas been spilled oapparatus, the aprain or moisture, dhas been droppe

15 The wall plug is the disconnecting device. The plug must remain readily operable.

16 An apparatus with three-prong, grounding-type plug is a Class I apparatus which needs to be grounded to prevent possible electric shock. Make sure that you connect the Class I apparatus to a grounding-type, three-prong outlet.

17 Remote control batteries should not be exposed to excessive heat such as sunshine, fire, or the like.

18 The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.

This symimportaninstructioaccompawww.insigniaproducts.com

ctions.ctions..ions.paratus near water.

dry cloth.ventilation openings. Install in he manufacturer's

r any heat sources such as isters, stoves, or other

ing amplifiers) that produce

safety purpose of the nding-type plug. A polarized es with one wider than the g type plug has two blades ding prong. The wide blade or re provided for your safety. If

does not fit into your outlet, cian for replacement of the

r cord from being walked on or rly at plugs, convenience he point where they exit from

ents/accessories specified by . rt, stand, tripod, pecified by the

sold with the a cart is used, use ving the mbination to avoid injury from

ratus during lightning storms or long periods of time. to qualified service personnel. red when the apparatus has any way, such as d or plug is damaged, liquid r objects have fallen into the

paratus has been exposed to oes not operate normally, or

d.

WarningsElectric shock hazard

To reduce the risk of fire or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians.

Lightning

For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.

Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Handling the LCD panel

Your TVs screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

Safety check

After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

bol indicates that there are t operating and maintenance ns in the literature nying your TV.

S3125A

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.

CautionsDamage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions: When the power supply cord or plug is damaged

or frayed. If liquid has been spilled or objects have fallen

into your TV. If your TV has been If your TV does not

the operating instrucontrols that are coinstructions becausother controls mayoften require extentechnician to restoroperation.

If your TV has beenway.

When your TV exhiperformance.

Outdoor antenna groundin

If an outside antennato your TV, make suresystem is grounded tagainst voltage surgeArticle 810 of the NatANSI/NFPA No. 70, prrespect to correct grosupporting structureto an antenna dischaconductors, locationconnection to grounrequirements for the

Note to CATV system installer

Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

Condensation

Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it

Antenna lead-in wire

Grounding clamp

Antenna discharge un

Grounding conductor

Ground clamps

Power service ground

Electric service equip

7

1

2

3

4

5

6

73www.insigniaproducts.com

exposed to rain or water. operate normally by following

ctions. Adjust only those vered by the operating e incorrect adjustment of

result in damage and will sive work by a qualified e your TV to its normal

dropped or damaged in any

bits a distinct change in

g

or cable system is connected that the antenna or cable

o provide some protection s and built-up static charges. ional Electrical Code, ovides information with unding of the mast and

, grounding of the lead-in wire rge unit, size of grounding of the antenna-discharge unit, ding electrodes, and grounding electrode.

on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.

End of life directivesYour TV contains tin-lead solder and a fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to find a recycler in your area.

Non-active pixelsThe LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

it

s

ing electrode system

ment

2

1

3

4

5

6

4NS-55E560A11 Insignia 55" LED-LCD TV, 1080p

Insignia 55" LED-LCD TV, 1080p

IntroductionCongratulations on your purchase of a high-quality Insignia product. Your NS-55E560A11 represents the state of the art in LED-LCD TV design and is designed for reliable and trouble-free performance.

FeaturesSR S TruSurround HD:

At Insignia, providingquality is just as impoquality. That's why wwhich provides you wsurround-sound expeand the enhanced baand gamers crave.

Insignia Motion 120Hz:

With a 120 Hz screen60 Hz screen, a scree(up from 720 lines inand special motion-dbe experiencing a picbrightness, smoothemotion blurring, partfast-motion sports an

Installing the wall-mount brInstalling the stand

To install the stand:1 Carefully place yo

cushioned, clean from damages an

2 Attach the stand

3 Secure the stand four screws.

Installing a wall-mount bracket

To attach your TV to a wall-mount bracket:1 Carefully place your TV screen face-down on a

cushioned, clean surface to protect the screen from damages and scratches.

2 If the stand is attached, remove the four screws that secure the stand to your TV, then remove the stand.www.insigniaproducts.com

you with superior audio rtant as exceptional picture

e added SRS TruSurround HD, ith a theater-like rience, with the clearer dialog ss sounds that movie viewers

refresh rate twice the rate of a n with 1,080 lines of resolution the last generation of HDTVs), etection technology, you will ture with clearer detail and

r transitions, and reduced icularly when watching d action scenes.

stand or acket

ur TV screen face-down on a surface to protect the screen d scratches.to your TV.

to your TV using the provided

3 Attach the wall-mount bracket to the back of your TV using four M8 25 screws and four spacers (provided).

TV componentsAccessories

Remote control Batteries (2 AAA) Power cord Component video cable Audio cable TV stand and screws Quick Setup Guide

Stand

M6 screws

15.75 inches (400 mm)

15.7

5 inc

hes (

400 m

m)


Front Side

NoteTo turn on your your TV, press five to seven secpress , the busecond time you

# Item Descrip

Remote control sensor Receive

Power indicator

Turns ofLights reTurns of

MENU Press to

INPUT Press to

VOL Press to

VOL Press to

CH Press to

CH Press to

(power)

Press tostandbyWhen ythroughthe pow

1

2

3

4

5

6

7

8


TV using the (power) button on twice. The presses must be within

onds of each other. The first time you tton labels appear on the screen. The press , your TV turns on.

tion

s signals from the remote control. Do not block.

f when your TV is turned on.d when your TV is in standby mode.

f when the power cord is unplugged.

open the on-screen menu.

select the video input source.

increase the volume.

decrease the volume.

go to the next channel in the channel list.

go to the previous channel in the channel list.

turn on your TV. Press again to put your TV in mode. our TV is in standby mode, power still flows it. To completely disconnect power, unplug er cord.

# Item Description

HEADPHONEConnect headphones to this jack. For more information, see Connecting headphones on page 12.

ANT/CABLE INConnect an antenna, cable TV, or satellite TV box to this jack. For more information, see Connecting an antenna or cable TV without a cable box on page 9.

AUDIO OUT L/R OUT

Connect an analog sound system to these jacks to send the TV audio through the sound system. For more information, see Connecting an analog (stereo) sound system on page 13.

PC VGA and PC/DVI AUDIO IN

Connect the video for a computer to the PC VGA jack. Connect the audio for a computer or DVI device to the PC/DVI AUDIO IN jack. For more information, see Connecting a computer on page 12.

HDMI1/HDMI2/HDMI3

Connect HDMI devices to these jacks. An HDMI cable carries both video and sound. You do not need to make an audio connection for an HDMI device.For more information, see Connecting an HDMI device on page 10.

1

2

3

4

5


Back Remote control

# Item Descrip

COMP Y/Pb/PrConnectthese jacompon

AV VIDEOConnectjack. Forcamcord

AV/COMP L/R audio

Connectconnectvideo demore ingame cocompon

DIGITAL AUDIO OUT

ConnectTV audioinformaon page

SERVICE For serv

HDMI4 Connect

1

2

3

4

5

6

4

2 3

5 6

7 8 9

0

1

INPUT

ZOOMAUDIO

RECALL

GUIDE

INFO

EXIT

MENU

POWER

MUTE PICTUREwww.insigniaproducts.com

tion the video for a component video device to cks. For more information, see Connecting a ent video device on page 11.

the video for a composite video device to this more information, see Connecting a er or game console on page 11.

the audio for a composite video device ed to the AV VIDEO jack or for a component vice connected to the COMP Y/Pb/Pr jacks. For

formation, see Connecting a camcorder or nsole on page 11 or Connecting a ent video device on page 11. a digital sound system to this jack to send the through the sound system. For more

tion, see Connecting a digital sound system 13.

ice only.

an HDMI device to this jack.# Button Description

POWER

Press to turn on your TV. Press again to put your TV in standby mode. When your TV is in standby mode, power still flows through it. To completely disconnect power, unplug the power cord.

PICTUREPress to select the picture mode. For more information, see Adjusting the TV picture on page 16.

MUTEPress to turn off the sound. Press again to turn the sound back on.

NumbersPress to enter channel numbers or the parental control password.Press to select a digital sub-channel. For more information, see Selecting a channel on page 14.Press to navigate in on-screen menus. For more information, see Navigating the menus on page 15.

ENTERPress to open a sub-menu or to confirm selections in the on-screen menus. For more information, see Navigating the menus on page 15.

VOL+ Press to increase the volume.

VOL Press to decrease the volume.

CCDPress to turn closed captioning on or off. For more information, see Using closed captioning on page 25.

ENTER

TIMECCD SLEEP

CH -

CH+

V OL-

V OL+

EN-21669I

1

2

3

4

5

6

7

8

9

10


Using the remInstalling remote cont

To install the remot1 While pressing th

compartment covlift the cover off t

2 Insert two AAA batteries into the battery compartment. Make sure that the + and symbols on the batteries align with the + and symbols in the battery compartment.

3 Replace the cover.

MTS/SAP

Press to select the audio mode for an analog channel.Press to select the audio track for a digital channel if more than one audio track is available.For more information, see Selecting the audio mode on page 17.

Remote indicator Lights when you press a button on the remote control.

INPUTPress to open the Input Source list. For more information, see Selecting the video input source on page 14.

AUDIOPress to select the sound mode. For more information, see Adjusting sound settings on page 16.

ZOOMPress to select the aspect ratio. For more information, see Adjusting the TV picture on page 16.

GUIDEPress to(if availachannel

INFOPress toinformapage 14

EXIT Press to

MENU Press to

RECALL Press to

CH +Press tomore inpage 14

CH Press toFor morpage 14

TIME Press to

SLEEPPress toSetting

(red) (green) (yellow) (blue)

These b(EPG). Ainstruct

# Button Description

11

12

13

14

15

16

17

18

19

20

21

22

23

24


ote controlrol batteries

e control batteries:e release tab on the battery er on the back of the remote,

he remote.

open the program guide for digital channels ble). For more information, see Viewing

information on page 14. display the channel banner. For more tion, see Viewing channel information on .

close the on-screen menu.

open the on-screen menu.

go to the previous channel.

go to the next channel in the channel list. For formation, see Selecting a channel on . go to the previous channel in the channel list. e information, see Selecting a channel on . display the current time.

set the sleep timer. For more information, see the sleep timer on page 27.

uttons work with the electronic program guide fter you press GUIDE, follow the on-screen ions for using these buttons.

Warnings Batteries should not be exposed to excessive

heat, such as sunshine, heat registers, or fire. Battery chemicals can cause a rash. If the

batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

Make sure that batteries are disposed of correctly. Do not burn or incinerate.

Notes Do not mix batteries of different types. Do not mix old and new batteries. Remove batteries when the charge is depleted. If the remote control is not going to be used for

an extended period of time, remove the batteries.


Aiming the remote control

To aim the remote control: Point the remote control toward the remote

control sensor on the front of your TV.

Programming univers

Programming a differcontrol

You can operate yourexisting universal rem

To program a differ1 See the table belo

have problems prneed a different rwww.insigniaprothe latest remote

2 Follow your univeinstructions to enStep 1.

For additional help and information: Visit:

http://www.insigniaproducts.com/remotecodes Call technical support for the universal remote

control or cable/satellite company of the remote/set-top box you are trying to program.

Call the Insignia Customer Care Center 1-877-467-4289.

Common universal remote control codesThe following is a list of the most common remote control codes. Codes for other remote controls are available online at: www.insigniaproducts.com or check with your cable or satellite TV provide for the remote control code.

Notes Do not exp Do not exp

do not usehigh humi

Do not plaheat or dirbattery cas

The remotsunlight orcontrol senyour TV orremote con

Tips If your univ

search featcode that mremote con

If your univfeature, yoInsignia TVone at a timcontrols in

19.68 ft. (6 m)

26.25 ft. (8 m)

19.68 ft. (6 m)

19.68 ft. (6 m)

26.25 ft. (8www.insigniaproducts.com

al remote controls

ent universal remote

Insignia TV with a new or ote control.

ent universal remote control:w for common codes. If you

ogramming your remote or emote control code, visit ducts.com/remotecodes for control code information. rsal remote controls ter the TV code you found in

Insignia TV codes for universal remote controls (for all Insignia TVs manufactured after Jan. 1, 2007)

ose the remote control to shock.ose the remote control to liquids and the remote control in an area with dity.ce the remote control in areas of high ect sunlight. The heat may warp the e.

e control may not work correctly if bright light is shining on the remote sor. To correct this problem, move

use the remote control closer to the trol sensor.

ersal remote control has a code ure, run a code search to identify a

atches your TV. See your universal trols instructions for details.ersal remote control has a Learn

u can manually program it using the remote to teach the commands e. See your universal remote

structions for details.

19.68 ft. (6 m) m)

Universal remote control makes and models

One for All 0054

Phillips 0198, 0490

RCA 135

Sony 068, 069, 078, 096, 100, 164, 168, 229, 026

Set-top box makes and models

Cablevision 068, 069, 078, 096, 100, 164, 168, 229, 026

Charter2002, 1204, 1423, 1517, 0171, 1963,

0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461, 507, 523, 567, 577, 586

Comcast10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963,

12002

Cox 1326, 1463

DirectTV 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002

Dish Network 720

Time Warner 400, 450, 461, 456, 10463, 1463, 0463

TiVo 0091

Verizon 0198, 0490

Tips The brand name is often visible on the front of

the universal remote control, and the model number is often visible on the back.

If your universal remote control isnt listed on the chart, refer to your universal remote controls instructions and try codes for the brands Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need to try several codes before finding a match.


Making connections

Connecting power

To connect the pow Plug the AC power

Connecting an antenna or cable TV without a cable box

To connect an antenna or cable TV without a cable box: Connect a coaxial cable (not provided) to the

ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack.

Cautions Check the jacks for position and type before

making any connections. Loose connections can result in image or color

problems. Make sure that all connections are tight and secure.

The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation that came with your equipment.

Always unplug the power cord when connecting external equipment.

Notes Your TV sh

power sou Always unp

power outTV for an e

Antenna or cable TV 9www.insigniaproducts.com

er:cord into a power outlet.

ould only be operated from the rce indicated on the label.lug the AC power cord from the

let when you will not be using your xtended period of time.

Notes Use a coaxial cable to eliminate interference and

noise from radio waves. Do not bundle the coaxial cable with the power

cord or other cables. If the antenna is not installed correctly, contact

qualified service personnel to correct the problem.

Back of TV

10

NS-55E560A11 Insignia 55" LED-LCD TV, 1080p

Connecting a cable or satellite boxMany cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available.

To connect a cable or satellite box:1 Connect the inco

or satellite TV wathe cable box.

2 Depending on thor satellite TV boxprovided) from thor satellite TV boxthe back of your THDMI jack, the COVIDEO jack.

3 If you use the COVIDEO jack, connAV/COMP L/R au

Connecting an HDMI device

To connect an HDMI device:1 Make sure that your TVs power cord is

unplugged and the HDMI device is turned off.2 Connect an HDMI cable (not provided) to the

HDMI1, HDMI2, or HDMI3 jack on the side of your TV or the HDMI4 jack on the back of your TV and to the HDMI OUT jack on the HDMI device.

Connection type Video quality

HDMI Best

Component Better than composite or coaxial

Composite Better than coaxial

Coaxial Good

NoteIf the cable or saHDMI, componecable or satellitethe back of youConnecting anbox on page 9.

Composite

NoteIf your device has an HDMI connection, we recommend that you use the HDMI connection to get the best quality possible.www.insigniaproducts.com

ming cable from the cable TV ll jack to the cable-in jack on

e jacks available on the cable , connect a cable (not e outgoing jacks on the cable to the corresponding jacks on V. The connection can be to an MP Y/Pb/Pr jacks, or the AV

MP Y/Pb/Pr jacks or the AV ect an audio cable to the dio jacks.

To play from an HDMI device:1 Turn on your TV, then press INPUT to open the

Source List.2 Press or to select HDMI 1, HDMI 2, HDMI3,

or HDMI 4, then press ENTER.3 Turn on the HDMI device, then set it to the

correct output mode. See the documentation that came with the device for more information.

tellite TV box does not have an nt, or composite jack, connect the TV box to the ANT/CABLE IN jack on

r TV. For more information, see antenna or cable TV without a cable

OUTINANTENNA

HDMIComponent

Satellite TV box

Cable TV box

NoteIf the device only has a DVI jack, use a DVI-to-HDMI adapter to connect the DVI jack to any HDMI jack on your TV, then connect the audio to the PC/DVI AUDIO IN jack.

Back of TV

HDMI device


Connecting a component video device

To connect a component video device:1 Make sure that your TVs power cord is

unplugged and the component video device is turned off.

2 Connect a component video cable to the COMP Y, Pb, and Pr jacks on the back of your TV and to the COMPONENT OUT jacks on the component video device.

3 Connect an audioaudio jacks on theL/R AUDIO OUT jdevice.

To play from the com1 Turn on your TV, t

Source List.2 Press or to se

ENTER.3 Turn on the comp

to the correct outdocumentation thmore information

Connecting a camcorder or game console

To connect a camcorder or game console:1 Make sure that your TVs power cord is

unplugged and the camcorder or game console is turned off.

2 Connect an AV cable to the AV VIDEO and AV/COMP L/R audio jacks on the back of your TV and to the AV OUT jacks on the camcorder or game console.

NoteThe COMP Y, Pbthe AV VIDEO ja

Back of TV

Component vicable

Cables are often color-coded to match color-coded jacks.

Back of TV11www.insigniaproducts.com

cable to the AV/COMP L/R back of your TV and to the

acks on the component video

ponent video device:hen press INPUT to open the

lect Component, then press

onent video device, then set it put mode. See the at came with the device for

.

To play from the camcorder or game console:1 Turn on your TV, then press INPUT to open the

Source List.2 Press or to select AV, then press ENTER.3 Turn on the camcorder or game console, then

set it to the correct output mode. See the documentation that came with the camcorder or game console for more information.

, Pr jacks share the audio jacks with ck.

Y PB PRLR

Component video device

deo

Audio cable

NoteThe AV VIDEO jack shares the audio jacks with the COMP Y, Pb, Pr jacks.

Cables are often color-coded to match color-coded jacks.Connect yellow to yellow, red to red, and white to white.

12


Connecting a computer

To connect a computer:1 Make sure that your TVs power cord is

unplugged and the computer is turned off.2 Connect a VGA cable to the PC VGA jack on the

side of your TV and to the VGA jack on the computer.

3 Connect an audioto the PC/DVI AUTV and to the LINthe computer.

To play video from t1 Turn on your TV, t

Source List.2 Press or to se3 Turn on the comp

properties if nece

Connecting headphonesThe TV speakers are muted when headphones are attached.

To connect headphones: Connect headphones to the HEADPHONE jack on

the side of your TV.

TipSome computers have an HDMI jack. You can use an HDMI cable to connect the computer for a better picture.

NoteThe VGA cable should be a 15-pin D-Sub (analog RGB) cable.

Back of TV

Ast

WarningLoud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.www.insigniaproducts.com

cable with stereo mini plugs DIO IN jack on the side of your E OUT or AUDIO OUT jack on

he computer:hen press INPUT to open the

lect VGA, then press ENTER.uter and adjust the display ssary.

VGA cable

udio cable with ereo mini plugs

Back of TV


Connecting a digital sound system

To connect a digital sound system:1 Make sure that your TVs power cord is

unplugged and the sound system is turned off.2 Connect a digital audio cable to DIGITAL

AUDIO OUT jack on the side of your TV and to the digital optical audio jack on the digital sound system.

Connecting an analog

To connect an analo1 Make sure that yo

unplugged and th2 Connect an analo

on the side of youjack on the analo

Turning on your TV for the first time

The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, TV signal source, and the channel list.

To set up your TV:1 Make sure that you have:

Installed the remote control batteries. (See page 7 for details).

Connected an antenna, cable TV, or satellite

Back of TV

Back of TV13www.insigniaproducts.com

(stereo) sound system

g (stereo) sound system:ur TVs power cord is e sound system is turned off.

g audio cable to L/R OUT jacks r TV and to the L/R audio in

g sound system.

TV. (See page 9 for details.) Connected the power cord. (See page 9 for

details.)2 Press POWER to turn on your TV. The Choose

your menu Language screen opens.

3 Press or to highlight the language you want, then press . The Choose your Picture Mode screen opens.

4 Press or to highlight Home Mode or Retail Mode, then press ENTER.Home Mode reduces total power consumption.If you selected Retail Mode, a message appears If you select Retail Mode, then Energy saving is not realized. Select Yes to continue, or select No to change your selection.The Choose your TV source screen opens.

Digital sound system

Analog sound system

ENTER MENU EXIT

Reduce total power consump it on.

Move Select Previous Exit

Please choose your picture mode

Retail ModeHome Mode

14


5 Press or to highlight Antenna or Cable, then press ENTER. Your TV automatically starts scanning for channels available in your viewing area.

Understanding the basics

Turning your TV on or

To turn your TV on o1 Make sure that th

power outlet.2 Press POWER to t

indicator LED blin3 Press POWER aga

enters Standby mLED turns red.

Selecting the video in

To select the video i1 Turn on your TV, t

List opens.

2 Press or to hithen press ENTER

Selecting a channel

To select a channel: Press CH + or CH to go to the next or previous

channel on the memorized channel list. Press the number buttons to enter the channel

number you want, then wait for the channel to change or press ENTER to immediately change the channel.

To select a digital sub-channel, press the number buttons to select the main digital channel, press

(dot), then press the number button for the sub-channel. Wait for the channel to change, or press ENTER to immediately change the channel. For example, to tune to channel 5.1, press 5,

NoteYou can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.

NoteUnless otherwise noted, all tasks in this section are based on using the remote control.

WarningWhen your TV ispower. To comppower cord.

NoteIf your TV does minutes, it auto

SourTA

ComV

HDHDHDHDwww.insigniaproducts.com

off

r off:e power cord is connected to a

urn on your TV. The power ks red, then turns off.in to turn off your TV. Your TV ode and the power indicator

put source

nput source:hen press INPUT. The Source

ghlight a video input source, .

(dot), then 1. Press RECALL to go to the previous channel.

Adjusting the volume

To adjust the volume: Press VOL + or VOL to increase or decrease the

volume. Press MUTE to turn off the sound. Press MUTE

again to turn the sound back on.

Viewing channel information

To view channel information: Press INFO to view an information banner. The

information banner shows the current program information such as channel number, video input source, and resolution.

Digital channel informationDisplays the channel number, station name, channel label, broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times.

Analog channel informationDisplays channel number, channel label (if preset), signal type, audio information, and resolution.

Using the electronic program guide (EPG)

To use the electronic program guide (EPG):1 When watching digital programs, select the

channel you want to watch.2 Press GUIDE. The EPG opens and shows detailed

information about the current program. The amount and type of information depends on the information provided by the broadcaster.

3 Press or to display information about future programs on the selected channel.

4 Press GUIDE one or more times to close the EPG. You can also wait 30 seconds for the EPG to close automatically.

in standby mode, it is still receiving letely disconnect power, unplug the

not receive an input signal for several matically goes into standby mode.

ce l is tVV

ponentGAMI 1MI 2MI 3 MI 4


On-screen menu overview

Picture menu

Audio

Channels menu

Settings menu

Notes Depending on the signal source selected, you

may see different options on your screen. Menu items that are not selectable are grayed

out. The screens shown in this manual are for

explanation purposes and may vary from the actual screens on your TV.

TM

ENTEMove

Picture Audio Channels Settings

PictureMode CustomBrightnessContrastColorTintSharpnessAdvanced VideoReset Picture Settin

Adjust Settings to aff

ENTER

Audio

Adjust Settings to effe

Move

Equalizer SettingBalance Digital Audio/SPDIF SRS TruSurroundHD MTS/SAP Audio Language Auto V olume Reset Audio Settings

ENTE

Channels

Adjust channel option

Move

Auto Channel SearchAdd/Skip ChannelAuto Zoom

TM

ENTER MENU EXIT

Pictur e Audio Channels Settings

Settings

Set varies TV options.


Parental ControlTime SetupClosed CaptionMenu SettingsReset to Default15www.insigniaproducts.com

Navigating the menus

R MENU EXITSelect Previous Exit

40525005

gs

ect picture quality.

TM

MENU EXIT


ct sound quality .

Select Previous Exit

0 PCM Off Stereo English Off

TM

R MENU EXIT

Pictur e Audio Settings Channels

s.


On

ENTER

ENTER

ENTER

MENU

9 EXIT

MENU

RECALL

RECALL

Press MENU to open the on-screen menu

Press the right or left arrow to move the cursor on the screen or to adjust a selected item.

Press the up or down arrow to select menu options.

Press ENTER to confirm selection or enter a sub-menu.

Press MENU to return to the previous menu.

Press EXIT to close the menu

16


Adjusting the picture

Adjusting the TV picture

To adjust the TV picture:1 Press MENU. The on-screen menu opens with

the Picture menu displayed.

2 Press or ENTER3 Press or to hi

or to adjust t Picture Mode

can select: Standard (a Theater (a f Customer (c Vivid (a brig Energy Sav

consumptio Sports (a dy

BrightnessA ContrastAdju ColorAdjusts TintAdjusts t SharpnessAd Advanced Vide

Picture-Advanceadjust additionaENTER to acceshighlight an opoption, then pre

Aspect RatioSelects the aspect ratio. You can select Cinema, Auto, Normal, Wide, or Zoom. Auto is only available in TV mode and when Auto Zoom on the Channels menu is set to On.

Color TemperatureSelects the color temperature. You can select Cool (to enhance the blues), Normal, or Warm (to enhance the reds).

Adaptive ContrastAutomatically adjusts picture detail and brightness.

Dynamic Contrast RatioEnhances the contrast ratio between light and dark areas of picture.

Noise ReductionSet options to reduce


NoteYou can also premode.

TM

ENTEMove


PictureModeBrightnessContrastColorTintSharpnessAdvanced VideoReset Picture Settin


ENTE

Adjust how the picture

Move

Picture-Advanced Vid

Aspect Ratio Color TemperatureAdaptiveDynamic Contrast RNoise ReductionInsignia Motion 120

Contrastwww.insigniaproducts.com

to access the menu.ghlight an option, then press he option. You can select:Selects the picture mode. You

standard picture)inely detailed picture)ustomized picture)ht and vivid picture)

ing (reduces power n) namic picture ideal for sports)

djusts the brightness.sts the contrast.

the color saturation.he image tint.just the sharpness.oOpens the d Video menu where you can l video options. Press or

s the menu, press or to tion, press or to adjust the ss ENTER to confirm.

video noise. You can select Off, Low, Medium, Strong, or Auto.

Insignia Motion 120Hz:Eliminates motion blur to provide clear detail and smooth motion. You can adjust:

EffectOff (turns off the option) , Low (set to option to minimum effect), Medium (Provide smooth and clear picture motion for normal use), and High (eliminates motion blur to provide clear detail and smooth motion).

Demo PartitionSets the 120 Hz demo area size and location. You can choose All, Right, or Left.

DemoDisplays the differences between the picture when the option is turned on and off.

Reset Picture SettingsResets all picture settings to the factory defaults.

4 Press MENU to return to the previous menu, or press EXIT to close the menu.

Adjusting the sound

Adjusting sound settings

To adjust sound settings:1 Press MENU. The on-screen menu opens.

ss PICTURE to select the picture


Custom40525005

gs


TM

R MENU EXIT

fills the screen.



eo

WideCool

Onatio

MediumHz

On


TM

ENTER MENU EXITMove Select Previous Exit


PictureMode CustomBrightness 40Contrast 52Color 50Tint 0Sharpness 5Advanced VideoReset Picture Settings

Adjust Settings to affect picture quality.


2 Press or to highlight Audio, then press or ENTER. The Audio menu opens.

3 Press or to hiENTER to access Equalizer Setti

audio frequenc BalanceAdju

speakers. Digital Audio/S

an external audRAW, or PCM.

SRS TruSurrouhome theater soOn or Off.

MTS/SAPSeleanalog channel

MonoProsound is diff

StereoPrfor sporting

SAPSeleweather repavailable.

Audio Languagthe audio languavailable.

Auto Volumeto be consistentchannels.

Reset Audio Sesettings to the f

4 Press or to ad to select a setti

5 Press MENU to repress EXIT to clos

Selecting the audio m

To select the audio Press MTS/SAP one

MONOSelectstatic on weak s

STEREOSelecbroadcast in ste

SAPSelect thsecondary audi

To select the audio mode for a digital channel: Press MTS/SAP. If an audio track is available, it

plays.

Changing channel settings

Scanning for channels

NoteMono is automabroadcast in mo

TM

ENTER MENU EXIT


Audio

Adjust Settings to effect sound quality .


Equalizer SettingBalance 0Digital Audio/SPDIF PCMSRS TruSurroundHD OffMTS/SAP StereoAudio Language EnglishAuto V olume OffReset Audio Settings


Note You do not need to scan for channels unless the 17www.insigniaproducts.com

ghlight an option, then press the option. You can select:ngsSelects and changes the y.sts sound to the left or right

PDIFSends digital audio to io system. You can select Off,

ndHDProvides the ultimate und solution. You can select

cts the sound mode (for s only). You can select: duces a clearer sound if stereo icult to hear.oduces dynamic stereo sound

events and concerts.cts a second language, ort, or added commentary, if

e(Digital TV only) Selects age if multiple languages are

Automatically adjusts volume across programs and

ttingsResets all audio actory defaults.just the option, or press or

ng.turn to the previous menu, or e the menu.

ode

mode for an analog channel: or more times. You can select:

this option if there is noise or tereo broadcasts.t this option for programs reo.is option to listen to a o program, if available.

When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH + or CH , your TV goes to the next or previous channel in the channel list.

To scan for channels:1 Press MENU. The on-screen menu opens.

2 Press or to highlight Channels, then press or ENTER. The Channels menu opens.

tically selected if the program is no.

available channels changed after you ran the Setup Wizard.

You do not need to scan for channels if you are using a cable box or satellite box.

TM





TM

ENTER MENU EXIT


Channels

Adjust channel options.


Auto Channel SearchAdd/Skip ChannelAuto Zoom On

18


3 Press or to highlight Auto Channel Search, then press or ENTER. The Auto Channel Search screen opens.

4 Press or to seCable/Satellite B If you are using

HD TV signal, se If your cable is c

(using no tuner If your cable is c

tuner box, selec

5 Press ENTER to st

Hiding channelsYou can hide channepress CH + or CH , ychannels. You can stipressing the number

To hide channels:1 Make sure that yo2 Press MENU. The

3 Press or to highlight Channels, then press or ENTER. The Channels menu opens.

NoteIf you are using need to scan formenu.

NoteYou can press Ebut you will neeagain to create

TM

ENTER MENU EXIT

Select Antenna if using an antenna for standard or HDTV.


Picture ChannelsAudio Settings

Channels - Auto Channel SearchChoose your TV source

Analog Channels: 0Digital Channels: 0

CableCable/Satellitebox

Antenna

ENTEMove



TM

ENTER MENU EXIT


Channels

Adjust channel options.


Auto Channel SearchAdd/Skip ChannelAuto Zoom Onwww.insigniaproducts.com

lect Antenna, Cable, or ox.

an antenna for a standard or lect Antenna.onnected directly to the TV box), select Cable.onnected to your TV through a t Cable/Satelite Box.

art the scan.

ls in the channel list. When you our TV will skip the hidden ll tune to a hidden channel by buttons for the channel.

u have scanned for channels.on-screen menu opens.

4 Press or to highlight Add/Skip Channels, then press ENTER. The Channel-Add/Skip Channels screen opens.

5 Press or to highlight the channel you want to hide, then press ENTER. The check mark disappears.


Setting parental controls

Setting or changing the passwordParental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter a password.

a Cable/Satellite box, you do not channels. Press EXIT to close the

XIT to stop the auto channel search, d to run the auto channel search

a channel list.

TM



Custom40525005

gs


Notes A channel with a check mark is not hidden. A

channel with no check mark is hidden. If the list has more than one page, press or

to scroll through the pages.


TM


Picture Audio

Channels Add/Skip Channels

Manually add and skip channels in your program list

4.14.24.34.44.5

4.64.74.84.94.10


To set or change the password:1 Press MENU. The on-screen menu opens.

2 Press or to hior ENTER. The Se

3 Press or to hithen or . The

4 Press the numberpassword. The deshould change thcan remember. Thopens.

5 Press or to highlight Change Password, then press or . The Change Password screen opens.

TM





ENTE

Settings

Set varies TV options

Move

Parental ControlTime SetupClosed CaptionMenu SettingsReset to Default

TM

ENTERMove

Settings Parental Contr

Enter your 4-digit passwor

Settings- Parental

Program BlockInput BlockChange PasswordButton lock Clean All

Channel Block

ENTER

CHANNEL BLOCK

Move

TM


Picture Audio Channels

Settings Parental Controls Change Password

Enter New Password

Enter your 4-digit password then re-enter it for confirmation.

Confirm New Password19www.insigniaproducts.com

ghlight Settings, then press ttings menu opens.

ghlight Parental Controls, Enter Password screen opens.

buttons to enter the four-digit fault password is 0000. You e password to a number you e Parental Controls menu

6 Press the number buttons to enter a password, then enter the password again. The Parental Controls menu opens again.


Locking control buttonsWhen the button lock is turned On, the buttons on the front of your TV are locked and you can only operate your TV using the remote control.

To lock control buttons:1 Press MENU. The on-screen menu opens.

2 Press or to highlight Settings, then press or ENTER. The Settings menu opens.

TM

R MENU EXIT


.


MENU EXITSelect Previous Exit


ols

Enter Password

d. Default is 0000

TM

PICTURE AUDIO CHANNELS SETTINGS

Off


NoteIf you forget your password, enter 9999 as the password. This password always remains valid for resetting your password.

TM





TM

ENTER MENU EXIT


Settings




20


3 Press or to highlight Parental Controls, then or . The Enter Password screen opens.

4 Press the numberpassword. The deshould change thcan remember. Thopens.

5 Press or to hipress or to sethe front of your Tbuttons on the fro


Blocking a video inpuYou can block a connused.

To block a video inp1 Press MENU. The


TM



Settings Parental Controls

Enter Password

Enter your 4-digit password. Default is 0000

Settings- Parental

Program BlockInput BlockChange PasswordButton lock Clean All

Channel Block

ENTER

CHANNEL BLOCK

Move

ENTEMove



TM

ENTER MENU EXIT


Settings



Parental ControlTime SetupClosed CaptionMenu SettingsReset to Defaultwww.insigniaproducts.com

buttons to enter the four-digit fault password is 0000. You e password to a number you e Parental Controls menu

ghlight Button Lock, then lect On (locks the buttons on V) or Off (does not lock the nt of your TV).

turn to the previous menu, or e the menu.

t sourceected video source from being

ut source:on-screen menu opens.


4 Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to a number you can remember. The Parental Controls menu opens.

5 Press or to highlight Input Block, then press or to open the Input Block menu.

TM


Off


TM



Custom40525005

gs


TM




Enter Password


TMPICTURE AUDIO CHANNELS SETTINGS

Settings- Parental

Program BlockInput BlockChange PasswordButton lock OffClean All

Channel Block

ENTER MENU EXIT

CHANNEL BLOCK


TM

ENTER MENU EXIT

PICTURE AUDIO CHANNELS SETTINGSSettings- Parental - Input Block

Signal source b lock.


TVAV

ComponentVGA

HDMI 1HDMI 2HDMI 3 HDMI 4


6 Press or to highlight the video input source you want to block, then press ENTER. A lock icon appears next to the video input source. When you press INPUT and select the blocked video input source, the screen turns black and Input is blocked! appears.


Setting parental control levelsYou can set parental controls for the U.S. and Canada.

U.S. TV ratings

Some of the age-bascontent-based rating

To set U.S. TV paren1 Press MENU. The


NoteTo unblock a blocked video input source, press ENTER, then enter the parental control password.

U.S. TV ratingsTV-Y All TV-Y7 ChiTV-G GenTV-PG ParTV-14 ParTV-MA Ma

U.S. TV content ratingsAll All FV FanL AduS SexV VioD Sex

ENTEMove



TM

ENTER MENU EXIT


Settings



Parental ControlTime SetupClosed CaptionMenu SettingsReset to Default21www.insigniaproducts.com

ed TV ratings also have s.

tal control levels:on-screen menu opens.



5 Press or to highlight Program Lock, then press ENTER. The Program Block menu opens.

childrenldren over seven years of ageeral audiences

ental guidance suggestedents strongly cautionedture audiences only

ratings are blockedtasy violencelt language

ual situationslenceually suggestive dialog

TM



Custom40525005

gs


TM




Enter Password



Settings- Parental


Channel Block

ENTER MENU EXIT

CHANNEL BLOCK


TM


Settings- Parental - Program Block

RRT5Block Unrated OffUSA Parental LocksCanadian Ratings

ENTER MENU EXIT

Enable Rating


22


6 Press or to highlight Rating Enable, then press or ENTER to select On or Off.To select the USA Parental Locks option, the Rating Enable option must be set to On.

7 Press or to highlight USA Parental Locks, then press or to open the USA Parental Locks screen.

8 Press or to m9 Press or

to block, then preappears next to thyou block a ratingratings are blocke

10 Press ENTER to co11 Press MENU to re

press EXIT to closU.S. Movie ratings

To set U.S. movie parental control levels:1 Press MENU. The on-screen menu opens.

NoteTo unblock a blothe parental con

U.S. movie (MPAA) ratinG GenPG Par

machi

PG-13 ParSomchi

R Notyeapar

NC-17 NotX AduNone Mo


Settings- Parental - USA Parental Locks

ENTER

Restrict movie and T

Move

MPAA Rating TV Ratings A D L S V FVG PGPG-13RNC-17X

TV- Y TV- Y7

TV- G TV- PG

TM




Adjust Settings to affect picture quality.www.insigniaproducts.com

ove to the TV Ratings list. to select the rating you want ss ENTER. A lock symbol e rating you blocked. When , that rating and all higher d.

nfirm. turn to the previous menu, or e the menu.




cked rating, press ENTER, then enter trol password.

gseral audiences.

ental guidance suggested. Some terial may not be suitable for ldren.ental guidance strongly suggested.

e material may not be suitable for ldren under 13 years of age. suitable for children under 17 rs of age unless accompanied by a ent or guardian. suitable for children under 17lts only

vie not rated

MENU EXIT

V program by US Ratings.


TV- 14 TV- MA

TM

ENTER MENU EXIT


Settings




TM




Enter Password



Settings- Parental


Channel Block

ENTER MENU EXIT

CHANNEL BLOCK



5 Press or to highlight Program Lock, then press ENTER. The Program Block menu opens.

6 Press or to hipress or ENTERTo select the USARating Enable op

7 Press or to hithen press or Locks screen.

8 Press or to m9 Press or to se

block, then press next to the ratinga rating, that ratinblocked.

10 Press ENTER to co11 Press MENU to re

press EXIT to closCanadian English TV rating

Canadian French TV ratings

To set Canadian TV parental control levels:1 Press MENU. The on-screen menu opens.

NoteTo unblock a blothe parental con

Canadian English ratingC ChiC8+ ChiG GenPG Par14+ Ove18+ AduE Exe

TM


Settings- Parental - Program Block

RRT5Block Unrated OffUSA Parental LocksCanadian Ratings

ENTER MENU EXIT

Enable Rating


Settings- Parental - US

ENTER

Restrict movie and T

Move

MPAA Rating G PGPG-13RNC-17X

Canadian French ratingsG General audiences8ans+ Children 8 years and older13ans+ Children 13 years and older16ans+ Children 16 years and older18ans+ Adult programmingE Not rated23www.insigniaproducts.com

ghlight Rating Enable, then to select On or Off. Parental Locks option, the tion must be set to On.

ghlight USA Parental Locks, to open the USA Parental

ove to the MPAA list.lect the rating you want to ENTER. A lock symbol appears you blocked. When you block g and all higher ratings are

nfirm. turn to the previous menu, or e the menu.

s


3 Press or to highlight Parental Controls, then or . The Enter Password screen opens.cked rating, press ENTER, then enter

trol password.

sldrenldren over 8 years olderal audiences

ental guidance suggestedr 14 years oldlt programming

mpt rated

TM


A Parental Locks

MENU EXIT

V program by US Ratings.


TV Ratings A D L S V FV TV- Y TV- Y7 TV- G TV- PG TV- 14 TV- MA

TM





TM

ENTER MENU EXIT


Settings




TM




Enter Password


24



5 Press or to hipress ENTER. The

6 Press or to hipress or ENTERTo select the USARating Enable op

7 Press or to hithen press or menu.

8 Press or to mFrench Ratings l

9 Press or to select the rating you want to block, then press ENTER. A lock symbol appears next to the rating you blocked. When you block a rating, that rating and all higher ratings are blocked.

10 Press ENTER to confirm. 11 Press MENU to return to the previous menu, or

press EXIT to close the menu.

Downloading rating information


Settings- Parental


Channel Block

ENTER MENU EXIT

CHANNEL BLOCK


Settings- Parental - Pr

RRT5Block UnratedUSA Parental LocksCanadian Ratings

ENTER

Enable Rating

Move

TM

Settings- Parental - Cana

ENTER

Restrict movie and TV

Move S

English Ratings

C C8+GPG14+18

NoteTo unblock a blocked rating, press ENTER, then enter the parental control password.www.insigniaproducts.com

ghlight Program Lock, then Program Block menu opens.

ghlight Rating Enable, then to select On or Off. Parental Locks option, the tion must be set to On.

ghlight Canadian Ratings, to open the Canadian Ratings

ove to the English Ratings or ist.

You can download rating information to use when setting parental controls.

To download rating information:1 Press MENU. The on-screen menu opens.



TM


ogram Block

Off



dian Ratings

MENU EXIT

program by Canadian Ratings.

elect Previous Exit

French Ratings

G 8 ans+13 ans+16 ans+18 ans+

TM





TM

ENTER MENU EXIT


Settings




TM




Enter Password




5 Press or to hipress ENTER. The

6 Press or to hipress or ENTERTo select the OpeLock must be set

7 Press or to hiENTER.If the program is binformation, the iautomatically andcontrols.

8 To reset RRT inforpress or to hENTER. A box opinstructions.


Using closed captioning

Using closed captioning

To use closed captioning:1 Press MENU. The on-screen menu opens.


Settings- Parental


Channel Block

ENTER MENU EXIT

CHANNEL BLOCK


Settings- Parental - Pr

RRT5Block UnratedUSA Parental LocksCanadian Ratings

ENTER

Enable Rating

Move


TM


Picture25www.insigniaproducts.com

ghlight Program Lock, then Program Block menu opens.

ghlight Rating Enable, then to select On or Off.n RRT5 option, the Program to On. ghlight RRT5, then press

roadcast with RRT5 rating nformation is downloaded can be used for parental

mation to the factory default, ighlight RRT5, then press ens. Follow the on-screen



3 Press or to highlight Closed Caption, then press ENTER. The Settings-Closed Caption menu opens.

TM


ogram Block

Off



Mode CustomBrightness 40Contrast 52Color 50Tint 0Sharpness 5Advanced VideoReset Picture Settings


TM

ENTER MENU EXIT


Settings




TM

ENTER MENU EXIT


Settings - Closed Caption

Adjust Closed Caption settings.


Caption CC1

Control CC OffAnalog CaptionDigital

Caption Service 1

Digital CC settings As Broadcaster

26


4 Press or to highlight an option, then press or ENTER to select a setting. If another menu

opens, press or to adjust the option. You can select: Caption ControlAdjusts closed captioning

settings. You can select CC Off, CC On and CC On When Mute.

Analog CaptionSelects the closed captioning mode for standard (analog) programs.

Digital CaptionSelects the closed captioning for digital programs

Digital CC SettingsSets the look of digital closed captioning. The default uses the broadcasters style. For more information, see Customizing don page 26.


Customizing digital cl

To customize digita1 Press MENU. The


3 Press or to highlight Closed Caption, then press ENTER. The Settings-Closed Caption menu opens.

NoteYou can also preor off.

ENTEMove



ENTE

Settings


Move


TM

ENTER MENU EXIT


Settings - Closed Caption

Adjust Closed Caption settings.


Caption CC1

Control CC OffAnalog CaptionDigital

Caption Service 1

Digital CC settings As Broadcaster www.insigniaproducts.com

igital closed captioning styles


osed captioning styles

l closed captioning styles:on-screen menu opens.


4 Press or to highlight Digital CC Settings, then press or ENTER. A menu opens. Press ENTER again. The Digital CC Settings menu opens.

5 Press or to highlight an style, then press or to adjust the style. You can select: StyleSelect Automatic or Custom. If you

select Automatic, the other options are not available.

SizeSelects the font size. You can select Small, Normal (default), or Large.

FontSelects the font style. Text ColorYou can select Black, White

(default), Red, Blue, Green, Yellow, Magenta, or Cyan.

Text OpacityYou can select Solid (default), Flashing, Translucent, or Transparent.

Background ColorYou can select Black (default), White, Red, Blue, Green, Yellow, Magenta, or Cyan.

Background OpacityYou can select Solid (default), Flashing, Translucent, or Transparent.

Edge EffectYou can select None (default), Raised, Depressed, Uniform, Left Shadow, or Right Shadow.

Edge ColorYou can select Black (default), White, Red, Blue, Green, Yellow, Magenta, or Cyan.


ss CCD to turn closed captioning on

TM



Custom40525005

gs


TM

R MENU EXIT


.



Settings- Closed Caption- Digital CC SettingsFront Size LargeFront Style Style1Front Color WhiteFront Opacity SolidBackground Color BlackBackground Opacity SolidWindow Color BlackWindow Opacity Transparent

ENTER MENU EXIT

Adjust the size of digital Closed Captioning front.



Adjusting time settings

Manually setting the clock

To manually set the clock:1 Press MENU. The on-screen menu opens.


3 Press or to hipress or . Theopens.

4 Press or to hi or to select y

Indiana, EasternTime, Arizona, MTime.

5 If your viewing artime, press or Savings, then pre

6 Press or to highlight Date/Time, then press or . The Date/Time menu opens.


TM

ENTEMove




ENTE

Settings


Move


TM

ENTER

Settings- Time Setup

Select your Time Zone

Move S

Date/TimeSleep Timer


Settings- Time SetupAuto Synchronization On

Timer Off

Date 01/01/2000Time

Power On TimerPower Off Timer

12:54 PM

12:00 AM 12:00 AM

ENTER MENU EXIT

Setup TVS Current date, time and power on/off timer.

Move Select Previous Exit27www.insigniaproducts.com


ghlight Time Setup, then Settings-Time Settings menu

ghlight Time Zone, then press our time zone. You can select Time, Hawaii, Alaska, Pacific ountain Time, or Central

ea observes daylight savings to highlight Daylight ss or to select On.

7 Press or ENTER to set Auto Synchronization to Off. Auto Synchronization must be set to Off to manually set the date and time.

8 Press or to highlight a setting, then press or to open a setting menu. You can select: DatePress or to move from field to

field, then press the number buttons to set the date.

TimePress or to move from field to field, then press the number buttons to set the time.


Setting the sleep timerYou can specify the amount of time before your TV automatically turns off.

To set the sleep timer:1 Press MENU. The on-screen menu opens.



Custom40525005

gs


TM

R MENU EXIT


.


M

NS-55E560dddA11_11-0573_MAN_V3_EN_Final_lr

Documents

connecting connecting

cable tv

tv picture

iversal remote control

locking control buttons

sound settings16selecting

cable box

e settings