NOx

NOxSources and Control Methods

CE/AE 524BAir PollutionJ. (Hans) van Leeuwen

Specific sources of NOx

Combustion sources• Automobiles• Boilers• Incinerators

High-temperature industrial operations• Metallurgical furnaces• Blast furnaces• Plasma furnaces• Kilns

Other sources• Nitric acid plants• Industrial processes that use nitric acid

US sources of NOx

• is one of the main ingredients involved in the formation of ground-level ozone, which can trigger serious respiratory problems

• reacts to form nitrate particles, acid aerosols, as well as NO2,

which also cause respiratory problems • contributes to formation of acid rain • contributes to nutrient overload that deteriorates water quality

• contributes to atmospheric particles that cause visibility impairment most noticeable in national parks

• reacts to form toxic chemicals

• contributes to global warming

NOx effects (taken from EPA)

Characteristics of NOx compounds

NO – Nitric oxide• Colorless and odorless gas• Insoluble in water (Remember this for later on!)• Toxic

NO2 – Nitrogen dioxide• Usually exists as a dimer compound (N2O4) at low 0C• Has distinct reddish-brown color• Moderately soluble in aqueous liquids• Toxic• Contributes to brown haze that occurs with smog

NOx Regulation

Q. NOx concentrations are relatively low in the atmosphere, so why are they regulated?

Q. A. NO and NO2 react rapidly with other compounds, creating ozone and other undesirable compounds. The NO and NO2 may never reach high concentrations, but are creating other air pollutants.

NOx Formation

• Formed at elevated temperatures during combustion of fuel in the presence of air.

• Approximately 90 to 95% of the nitrogen oxides generated in combustion processes are in the form of nitric oxide (NO). (Remember this for later on!)

• Once in the atmosphere, the NO reacts in a variety of photochemical and thermal reactions to form NO2.

• Thermal NOx: formed by reaction between N2 and O2 in the air; sensitive to temperature

• Fuel (or Prompt) NOx: formed from combustion of fuel containing organic nitrogen; dependent on local combustion conditions and nitrogen content in the fuel.

• Not all of the fuel nitrogen compounds are released during combustion. Unlike sulfur, a significant fraction of the fuel nitrogen remains in the bottom ash or in the fly ash.

NOx Formation

NOx control technologies

http://www.netl.doe.gov/technologies/coalpower/ewr/nox/control.html See also:

Control Techniques

1. Modify combustion to suppress NOx formation

• Low excess air operation• Off-stoichiometric combustion• Flue gas recirculation• Natural gas reburning

2. Reduce Nox to molecular nitrogen through controls (also known as flue gas treatment)

• Selective Non-Catalytic Reduction (SNCR)• Selective Catalytic Reduction (SCR)• Dry Sorption

Strategies for Combustion Modification

• Reduce peak temperatures of the flame zone

• Reduce gas residence time in the flame zone

Combustion ModificationsLow excess air operation: Involves a reduction in the total quantity of air used in the combustion process. By using less oxygen, the amount of NOx produced is not as great.

Combustion ModificationsOff-stoichiometric combustion: Involves the mixing of the fuel and air in a way that reduces the peak gas temperatures and peak oxygen concentrations.

Low NOx burners: Keeps temperatures down and dissipates heat quickly Overfire air (OFA): Keeps mixture fuel rich and completes combustion process using air injection nozzles Burners out of service (BOOS): Operates alternate burners in combustion zone as fuel rich, air rich, and air only

Flue gas recirculation

Involves the return of cooled combustion gases to the burner area of the boiler. Reduced temperatures produce less NOx. The process requires a recirculation fan and duct system.

Combustion Modifications

Combustion ModificationsFuel reburning: Involves the operation of the main burners in a boiler at very low excess air (fuel rich conditions). A series of overfire air ports are used in this upper region to provide all of the air needed for complete combustion.

Add-On Controls (Flue Gas Treatment )

Selective non-catalytic reduction systems (SNCR)

Involves the injection of ammonia (NH3) or urea

into the hot gas zone where reactions leading to reduction of nitrogen oxides can occur. The reactions are completed within the boiler, and no waste products are generated. There is a risk of ammonia (NH3) being emitted into the atmosphere

if temperatures are too low, however. SCNR systems are capable of reducing nitrogen oxides from 20 to 60%.

Selective Noncatalytic Reduction (SNCR) Reactions:

OHNOONH

OHNONONH

223

2223

6454

6444

Add-On Controls (Flue Gas Treatment )

Above 1000 oC

Selective catalytic reduction (SCR)

Involves using beds containing ammonia or urea to reduce nitrogen oxides to molecular nitrogen and water. Two or three catalysts (usually tungsten and vanadium) are arranged in honeycomb shapes in the beds so air can flow through. NOx reduction efficiencies ranging from 75 to 90% are possible when the amount of catalyst is sufficient, the catalyst is in good condition, the ammonia reagent flow is sufficient, and the ammonia is adequately distributed across the gas stream.

Add-On Controls (Flue Gas Treatment )

Add-On Controls (Flue Gas Treatment )

Selective Catalytic Reduction (SCR) Reactions

OHNONHNO

OHNONHNO

22catalyst supported OVor TiO

232

22catalyst supported OVor TiO

23

6342

6444522

522

Temperature ~ 300 - 400 oC

Dry Sorption

– Activated carbon (220 ~ 230 oC)– Shell Flue Gas Treating System (~ 400 oC)

– Alkali Metal and Alkali Earth Metal based sorbents

CuOOCu

OHSOCuHCuSO

OHNONHNO

CuSOSOOCuO

2

2224

22catalysts as CuSOor CuO

23

422

5.0

22

6444

5.04

Add-On Controls (Flue Gas Treatment )

Would wet scrubbers be a good control technique for NOx emissions?

Final Remark

Wet scrubbers would not be a good control technique for NOx emissions.

Why? Remember, NO is mainly formed during the combustion process and NO2 is formed in the atmosphere. Since NO is insoluble in water, wet scrubbing would not work very well!

Final Remark