November RaspberryPiBASICSPresentationSLIGHTLYOUTOFDATE

DSI connector is on board on the RPI. Some graphical LCD/OLED displays might be attached to it.

JTAG-programmer for Xilinx CPLDs/FPGAs, C2-programmer for SiLabs C8051F

The LEDs have the following meanings :ACT – D5 (Green) – SD Card AccessPWR – D6 (Red) – 3.3 V Power is presentFDX – D7 (Green) – Full Duplex (LAN) connectedLNK – D8(Green) – Link/Activity (LAN)100 – D9(Yellow) – 100Mbit (LAN) connected

Or Echolink, IRLP, Allstar Node

BTW: The Pi works with Kantronics KPC3+ too using Minicom for Packet

WINLINK GATEWAYFLDIGI

SVXLINK (ECHOLINK WITH PROXY CAPABILITIES)QTEL (ECHOLINK CLIENT)

AX.25CHRIP

D-RATSHAM FAX

NEC2WSJT

+ + + +

startx

Change the keyboard to US

Oh Boy, CLI vs GUI

BASIC Raspbian (Wheezy) Linux Commands

sudo susudo raspi-config

startxapt-get install synaptic

apt-get updateapt-get upgrade

apt-get disti-upgradels

lsusbalsamixer, alsaplayer

chmodhalt, reboot, reload

nanosudo raspi-config

apt-get checkapt-get –f install

apt-get autocleanapt-get autoremove

cddpkg, wget,man apt-get

If you mess up, then reboot, and hit shift key and reinstall Rasbian (Wheezy)

CLI Stuff to

know

Start Out the Easy Way with the GUI then get fancy with the CLI

TANNER / MICROCENTERELEMENT 14, ADAFRUIT