Novatel MiFi 4510L Software Upgrade - The Office of ... · Novatel MiFi 4510L Software Upgrade . 5. Navigate to the Downloads folder (or where the software package was downloaded),
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Novatel MiFi 4510L Software Upgrade
Overview To help you with the system update for your Novatel Mifi 4510L, this page contains the following information:
o System Update Instructions for Windows users
o System Update instructions for Mac users
Software Details:
o Software version - 2.23
o Software update size for Windows – 18MB
o Software update size for Mac – 28MB
o Estimated software download and upload time – approximately 10-30 minutes
System Update for Windows users 1. If your MiFi 4510L is Off, press the power button to turn it On. If your MiFi 4510L is On, turn it off by pressing the
power button. Then, turn it back on.
2. Connect the computer to the MiFi 4510L device wirelessly. Then, open a Web browser on the computer and ensure that it is connected to the internet.
3. When ready, click here, to initiate the download of the software update package. Depending on the browser used, a series of pop-up dialogs will be seen while the package is downloaded. The below dialog screenshots are for Internet Explorer browser.
4. Click Save to save the file to the Downloads folder of the Web browser (or any other location), and to initiate the download of the software package.
10. Driver will be automatically installed if no driver is detected on the computer.
11. Once the installation is complete, you will be prompted to connect the MiFi device to the computer using the USB cable that comes with the MiFi 4510L.
12. Connect the MiFi 4510L to the computer using the USB cable.
13. Before inserting the MiFi4510L device, the OK button is disabled. After the MiFi device is inserted to the computer and detected by the OS, the OK button is enabled.
14. Click the OK button to run the Device Update Utility to update the FW on the MiFi device to FW 2.16.07. A warning message pops up. Click OK to continue. DO NOT remove the device at any time during the firmware upgrade process, and have the computer connected to a power supply if the battery level is less than 40%
15. This initiates the Device Upgrade Utility (DUU). Click Next to continue.
18. Once the process is complete, click on Finish to exit and unplug the MiFi device from the USB cable.
System Update Instructions for Mac users 1. If your MiFi 4510L is Off, press the power button to turn it On. If your MiFi 4510L is On, turn it off by pressing the
power button. Then, turn it back on.
2. Connect the computer to the MiFi 4510L device wirelessly. Then, open a Web browser on the computer and ensure that it is connected to the internet.
3. When ready, click here, to initiate the download of the software update package. This will initiate the download of the Mac Device Update Package. Save this file “MiFi4510LMac.zip” to local folder.
4. Unzip the files and open the folder MiFi4510LMac in the Finder. Double click “3G_Drivers_v3.0.24-PS.pkg” to start install MiFi4510L driver.
9. A warning message will appear on your screen. Click Ok to start installation.
Please DO NOT remove the device at any time during the firmware upgrade process, and have the computer connected to a power supply if the battery level is less than 40%. Do NOT put the device in sleep or hibernate mode. Interrupting the upgrade process may permanently damage the device.
10. The Device Upgrade Utility (DUU) will check the current firmware information. Once the current FW version is
retrieved the navigation buttons become active. Click the Next button to continue.