Truth Casement Operators 17319 Blaine Drive Hagerstown, Md 21740 Toll Free: 800-678-1919 Fax: 888-250-3960 e-mail: [email protected]web: www.blainewindow.com 3-7/8" 4-5/16" #10579 Crank Handle Sold Separately. Specify Color 15.88.00.002 Right Hand 15.88.00.001 Left Hand As Shown 9-3/8" Blaine Part No. 9-3/8" 9-3/8" 15.88.00.002 15.88.00.001 Arm Length Note: This is a concealed operator and does not use a cover. G5-48 Note: New rounded style housing for all operators shown below 23.77 15.09 15.61 23.65 13-1/2" Left Hand 15.30 9" 3-15/16" For cover, order 10341 For crank handle, order 10579 For track, order 30473 For bracket, order 10339 Cover colors in stock: bronze, gold, white 59.05 05275 Right Hand Shown 9"
11
Embed
Note: New rounded style housing for all Truth Casement ...blainewindow.com/wp-content/uploads/PDF/G5_Op_Truth.pdf · 17319 Blaine Drive Hagerstown, Md 21740 Toll Free: 800-678-1919
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
15.88.00.002 Right Hand15.88.00.001 Left Hand As Shown
9-3/8"Blaine Part No.
9-3/8"9-3/8"
15.88.00.00215.88.00.001
Arm Length
Note: This is aconcealedoperator anddoes not use acover.
G5-48
Note: New rounded style housing for alloperators shown below
23.77
15.09
15.61
23.65
13-1/2"
Left Hand
15.30
9" 3-15/16"
For cover, order 10341For crank handle, order 10579For track, order 30473For bracket, order 10339
Cover colors in stock: bronze, gold, white
59.05
05275
Right Hand Shown
9"
Arm Lengths: 6",7-1/2", 9-1/2", 13-1/2"
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
TRUTH / WRIGHT"Truth" and "Wright" window mechanisms are used by many window companies. The word "Truth" or "Wright" will
appear on the arm outside the window that connects the operator to the bottom of the window. You must open the window tosee it. Some brands that use this hardware include: Acorn, Avon, Biltbest, Caradco, Certainity, Craftline, Crestline, Eagle,Harvey, Hurd, Johnson-Postman, King, Kolbe & Kolbe, Lincoln, Louisiana-Pacific, MW, Malta, Marvin, National, Norco, Nordic,Pozzi, Row, Semco, Vetter, Weathershield and Windsor.
Blaine Part No. Color Gold Gold White WhiteChestnut BrzChestnut Brz Beige Beige Clay Clay White White Bronze Bronze Gold Gold Beige Beige Clay Clay White White Bronze Bronze Gold Gold Clay Clay White White Bronze Bronze
Standard 10579 Folding Handle 11329 T-Handle 11573
Bracket 10339 LH Bracket 10340 RH Track 30473
5-1/4"Cover 10341
ENTRYGARD DUAL ARM OPERATOR TRUTH &ANDERBERGPlease send a sample for accurate
identification
15.10.00.001 Left15.10.00.002 Right
15.14.00.001 Left15.14.00.002 Right
15.15.00.001 Left15.15.00.002 Right
15.16.00.001 Left15.16.00.002 Right
Other "A" Sizes also available. Referto number stamped on link.
Component Part numbers to help identification:Housing = 40372 or 40471 or 40254Main Arm (10") = 40753 or 30470 or 30472 or 40754Arm (Dog Leg) = L30841 or 31538A or 30637 or 30842Link (4") = 20810 or 20544
Some newer models do not have part numbersstamped on components
8-7/8"
Top View
"A"
Offset
No. stamped on link
Top Clip
Right Hand"A" 8-7/8"
Other dimensions available.Please Inquire
2-3/8" - 15.15.00.001 15.15.00.002
3-5/16"- 15.16.00.001
20748
20755
"A" MeasurementNo. Stamped On Link
15.16.00.002
3-15/16"- 15.10.00.001 15.10.00.002
20810 or20544
3-15/16"- 15.14.00.001* 15.14.00.002*
* = Stainless Steel
Left Hand
-----
Andersen
3-13/16" 3-3/4"
Non-handed
For sash bracket, order: 20272-1-L or 20272-1-RHFor crank handle, order: 20684-1-078 or 20684-1-067For cover, order: 20684-2-078 Stone or 20684-2-067 White
Pella Right hand show. Specify rightor left hand when ordering.
6-1/4"
5"
6" 9/16"
Sold separately:00327 Crank handleavailable in gold, champagne& white
08459 CoverAvailable in gold, champagne& white
Right hand shown.Specify Right or lefthand.
5"
4-1/8" For left hand, order 10451-Left
For crank handle, order: 00327-057 Gold 00327-099 Champagne
Andersen
11-3/8"1-1/2" 1-1/2"
3-1/8"
Left hand shown
For right hand, order 5364-R
For sash bracket, order 20272-1-LH or 20272-1-RHFor crank handle, oreer 20684-1-078 or 20684-1-067For cover, order 20684-2-078 stone or 20684-2-067 white
23.02.23.001 Left Hand Sold separately:10579.23 handle30175 track03030-10-L/R-050 Hinges24.25 Locking Handle21088 KeeperFor front mount operator, order 23.03
8-3/4"
23.49.03.001 Right Hand23.49.03.002 Left Hand
5" c-c hole spacing
Sold separately:10579.03 Handle03030-10-L/R-050 Hinge10558.92 Bracket24.25 Locking Handle21088 Keeper available in white and bronze
stability tab
5"3-1/2" 4-1/2"
23.59.32.002 Left Hand23.59.32.001 Right Hand
23.02
G5-51
Truth Part No. Color Clay Clay White White Bronze Bronze
9-1/2”Due to engineering design changes,“New Style Arm” replaces original.
In some cases the No. 3 position mounting screwmay need to be eliminated or ground down in lengthdue to interference in the full closing position of thearm. Another alternative would be to grind a notch inthe arm to clear the screw end.
Also available with rear mount housing.Order #23.00.XX.001 Left Hand or#23.00.XX.002 Right Hand
31641 Guide Bar10005 Shoe Studs10341.XX Cover10579.XX Handle31642 Guide Bar
Hardware ShownSold Separately
Recommended Screws:Operators:Wood: 6(P/N 19240.92) Steel SST #8 x 1.0 Phillips, Flat Head, Sheet Metal ScrewsPVC / Metal: 6 #8 Phillips, Flat Head Screws (Length and thread type determined by profile).Guide Bar: 3(P/N 19240.92) #8 x 1.0 Phillips, Flat Head, sheet metal screws.
Truth Casement & Awning Operators
G5-60
15.11.00.001 As Shown15.11.00.002 Opposite
Aluminum & Vinyl Window Awning Operator
Blaine Part No. ColorAluminumClayWhiteChestnut Brz.BronzeWhite
No. 10579 Crank Handle sold sepa-rately. Order color matcing no. 10341cover.
Bracket for end of link sold separately. Order 12511.92bracket for 15.11.00.002 operator. For 15.11.00.001operator, order 12510.92 bracket, as shown
22.21
23.77.XX.001 as shown23.77.XX.002 opposite
Truth Scissors Arm Operator For Awning Windows
23.03.XX.001 as shown23.03.XX.002 opposite
9”
Discontinued “Original Style”Arm
9-1/2”
Due to engineering designchanges, “New Style Arm”replaces original.
In some cases the No. 3 position mountingscrew may need to be eliminated or grounddown in length due to interference in the fullclosing position of the arm. Anotheralternative would be to grind a notch in thearm to clear the screw end.
Also available with rear mount housing.Order #23.00.XX.001 as shown, aboveor #23.00.XX.002 opposite
Extra 14 Tooth Gears Also Available. Order738. Covers no longer available.
Nowmanufactured by Blaine
738
7/8"
2-7/8"
3-5/8"Peachtree Operator
10-24ThreadedStud
2-1/2"
2-5/16"
1-1/8"
Right HandShown
Sold with#303 CrankHandle
5-1/4"
Aluminum FinishRight hand only asshown
3/8"
2-1/2"
5/16" holeNo threads
5"
3/8"
3-15/16"
3-1/2"
2-7/8"
Sold asa kit
1. Determine the similarity of your sample tothe picture, at left.
2. Note the following:a. 800-A kits work for most obsoletejalousie operators.b. 800-A operators work on the leftand right side.c. 3 links in package allow for besthook-up to replace original.d. Package includes all fasteners.e. Comes in dull aluminum finish
only.
Right Hand Shown.
Arm Lengths: 9", 13"
13"
Detroit Swing Lite
Sold with #302Crank Handle.
Sold with #301Crank Handle.
Replacement
9"
Specify Handing.Left Hand Shown.Left Hand MostCommonly Used.
1-3/8"
Sold with #302Crank Handle.
45 45-1/2
2"
1-1/2"
726
Stanley Stanley
5/16"
11/16"
1/2"
712Ualco
Ualco
45-1/2 currently unavailable
Order No. 468-1" connector separately
Order No. 322 crank handle separately
No. 468-8" extension now unavailable.
Order crank handleseparately:01001-1-060
9”
Bronze painted finish
3-7/16”
11/16”
Nowmanufactured by Blaine
54
Awning Operators
Sold with #303crank handle
4-1/4" hole centers
3-7/8" &4-3/4"holecenters
800A
3/8"Hex
322 Crank handle sold separately
Operator for ResidentialSash. Use with #712Gear, shown at left and#399 Crank Handle . Bothsold separately.
*Measure the distance from thebottom of the mounting plate tothe base (see drawing above).Order the operator by the letterdesignation that corresponds tothe measured distance.
*Measure the distancefrom the bottom of themounting plate to thebase (see drawingabove). Order theoperator by the letterdesignation thatcorresponds to themeasured distance.