1 Copyright 2016 by Erling Riisnæs. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior permission in writing from the publishers. NORWEGIAN MARITIME EQUIPMENT 22. edition Published by: Instituttet for Merkantil Informasjon a-s P.O. Box 1617 Kilen, NO-3206 Sandefjord Tel.: +47-91 32 37 11 e-mail: imi@ imi.no www.maritime-suppliers.com www.marine-system.no www.seadirectory.com PRODUCTS AND SERVICES FOR THE SHIPPING AND OFFSHORE INDUSTRY. LISTING OF THE NORWEGIAN EXPORTERS AND THEIR FOREIGN REPRESENTATIVES Summary from www.maritime-suppliers.com
568
Embed
NORWEGIAN MARITIME EQUIPMENT - SeaDirectory.comweb.seadirectory.com/.../Norwegian_Maritime-Equipment_2016.pdf · ”Norwegian Maritime Equipment” nor do they accept ... - Pneumatic
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Copyright 2016 by Erling Riisnæs. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior permission in writing from the publishers.
NORWEGIAN MARITIME EQUIPMENT
22. edition
Published by:Instituttet for Merkantil Informasjon a-sP.O. Box 1617 Kilen, NO-3206 Sandefjord
Index to Product Categories ..................................................127
Main Product Categories: Accommodation Equipment ...................................................135 Air, Gas & Pneumatic Equipment ..........................................149 Automation and Control .........................................................159 Boats, Lifesaving, Safety & Firefighting Equipment ..............177 Construction & Operation Services .......................................193 Construction/Fabrication Equipment & Software ...................201 Deck Machinery & Equipment ...............................................205 Electrical ................................................................................215 Engineering/Management Services & Software ....................223 Hydraulics Equipment, Fluid Transfer and Treatment ...........229 Materials, Protection & Insulation ..........................................243 Navigation & Communication ................................................249 Power Generation, Propulsion & Manouvering .....................257 Special Purpose Equipment ..................................................271 Structures & Outfitting Details ...............................................279 Tanks and Heating/Cooling Equipment .................................293Index to the SFI-system groups ............................................305
Directory of Suppliers ............................................................373Sales Representatives, Alphabetical list ................................471Sales Representatives, Geographical list ..............................513Foreign Factories / - Producers / - Suppliers represented .559Trade Marks.............................................................................563
CONTENTS:
1_4_2016.indd 2 07.08.2016 12:04:55
3
FOREWORDWe hereby have the pleasure of introducing the 22th edition of ”Norwegian Maritime Equipment”
The content of this publication is made on information given by the com-panies introduced in "Directory of Suppliers". Therefore, the publisher are not able to guarantee the accuracy of the information obtained in”Norwegian Maritime Equipment” nor do they accept responsibility for errors or omissions or their consequences. However, all the information given is controlled and accepted by the companies listed.
We would like to thank the many companies/individuals who have trusted us by giving us the information for this publication and which have made this production possible.
IMI has, some years ago, carried out a major research project. The pro-ject was financially supported by the Norwegian Research Council as well as by organizations like the Federation of Norwegian Industries, Marine Div. and the Association of Norwegian Maritime Exporters. It aims at de-veloping solutions enabling suppliers to provide product specifications that customers may import directly in their outline- or building specificati-ons.
The major consequence for our customers is the change in how products are classified. Historically, products have been connected to one group only. We experienced that products had to be duplicated in order to be located via a multiple product groups. In addition to that, product groups have represented a “mixture” of products, some of them being solely component based (i.e. “cranes”), whereas others have been system based (e.g. “deck machinery”), and others re-presenting a combination (e.g. “deck cranes”). This resulted in a large number of product groups.
The present change in structure, as will be seen in this book, implies that products now are classified in a new component structure (Component Breakdown Structure, CBS). In this system the products are sorted by
1_4_2016.indd 3 07.08.2016 12:04:55
4
type. Then products are also associated with relevant functions or sys-tems according to the well-known SFI system, a group system widely used within the maritime sector.
For instance, products that earlier would belong to the group “deck cra-nes” will now be classified as component group “Cranes, crane equip-ment, etc” and then among the system group “Deck cranes for cargo” (SFI 33). This means that the product in the online version will be shown when searching for cranes in general, and at the same time searching for cargo handling equipment. Both CBS and SFI are defined in a tree struc-ture.
Users will now find it easier to search for and get hold of the relevant pro-ducts.
We have worked intensily to make the transformation to a new grouping structure as smooth as possible and to ensure good quality to our clients. However, this is a major change and we hope our good customers will let us know if improvement areas are found.
Next edition will be published in June 2017.
Sandefjord, August 2016.The Publisher
1_4_2016.indd 4 07.08.2016 12:04:55
5
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305PRODUCT NAMES
5-126_PR_2016.indd 5 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
6
AC DRIVES- Electrical motors & starters System groups: 62, 651, 7 STADT AS 6083 Gjerdsvika Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no STADT STASCHO is a No Loss AC drive that supplies sinusoidal voltage and current to the electric motor and back to the main switchboard. This gives very low harmonic disturbances without using transformers or filters. STADT STASCHO is specially developed for marine propulsion systems, where it is used together with controllable pitch propellers.
ACCOMMODATION LADDERS- Ladders, railings, stairs, ramps & gangways System groups: 564 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium can supply a wide range of Accommodation ladders including: - Telescopic ladders - Fixed ladders - Bulwark ladders - Pilot ladders
The accommodation ladders and gangways can be made with: - curved steps, - fixed ribs
- perforated non-slip grating - adjustable steps The ladders will be custom built according to your specification. Some items are however also in stock.
ACTUATORS- Hydraulic motors & actuators - Pneumatic actuators System groups: 601, 651, 79, 898 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Representing: Danaher Motion, Stockholm, Sweden: Linear actuation systems. MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se We supply pneumatic double-acting or single-acting with spring return. The actuators are mainly quarterturn actuators for butterflyvalves and ball valves or multiturn for gate valves and globe valves. We also supply linear actuators for gate valves, knife gate valves and globe valves. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com
5-126_PR_2016.indd 6 07.08.2016 11:45:31
7
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Totally electric Actuator Ultra compact, high torque, easy control electric actuator for remote valve control. Based on permanent magnet motor technology from the PG-MAPS pumping concept. Wide range of scalable sizes, and ATEX 100 ex-proof available
ADSORPTION DRYERS- AC units, air dryers, air cooling and heating components System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2
AGITATORS- Pumps & pump units System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com
PG-Submix 60 / 80 (Hydraulic driven) Market leading product for OSV’s world wide for high yield liquid mud handling Flygt Mixers (electrically driven) World leading products for electric mudmixers
AIR CONDITIONING- AC units, air dryers, air cooling and heating components System groups: 57 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Teknotherm refrigeration plants for air-conditioning of accommodation, control rooms, etc. can be delivered either as direct expansion systems or as water chilling units for indirect cooling. According to the required capacity, or to your specific demands, our plants can be delivered with compressors of reciprocating- or screw type. Normally everything assembled to a condensing unit as comprise, compressor, condenser, electric motor and necessary auxiliary equipment..
5-126_PR_2016.indd 7 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
8
AIR DRYERS- AC units, air dryers, air cooling and heating components System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2
AIR HANDLING UNITS- AC units, air dryers, air cooling and heating components System groups: 316, 362, 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® air handling units are designed to satisfy HVAC requirements for all accommodation spaces onboard ships. We offer a flexible range of units. The units are made up of modules that enable us to deliver solutions tailor made to each vessel and ventilation room. Our products come in selections of single or dual-pipe units, low or high pressure units. AERON® Marine Air Handling Units: . are assembled from a wide range of standard sections
. are available in 12 sizes up to 51000 m3/h
. have very good acoustic and thermal insulation . can be delivered both as galvanised or stainless steel . are delivered with wave breakers and water traps . fan and motor are mounted on vibration dampers with flexible connections AERON® Marine Air Handling Units are delivered with all necessary accessories in order to minimise installation work at the yard. The heat exchangers and evaporators can be delivered in any type of materials the customer demands.
AIS (AUTOMATIC IDENTIFICATION SYSTEMS)- Detection & identification equipment - Safety equipment KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex - AIS Onboard In accordance with IMO requirements all SOLAS ships in international traffic above 300 gross tons must have Automatic Identification Systems (AIS) installed onboard. We offer a wide range of different AIS for use onboard ships (AIS mobile stations) tailored to different requirements. All mobile stations are in accordance with the IMO regulations. AIS Infrastructure We provide a full range of AIS infrastructure used for shore-side and platform based AIS
5-126_PR_2016.indd 8 07.08.2016 11:45:31
9
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
infrastructure. Our long record of supplying AIS infrastructure, GPS reference networks and EGNOS monitoring systems has provided us with the competence needed to undertake AIS projects of all types. We are an active member of IEC, ITU and IALA.
ALARM SYSTEMS- Monitoring equipment System groups: 381, 40, 79, 792, 793, 795, 85, 87, 875 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering.
ALUMINIUM BOATS- Lifeboats/rafts & other boats System groups: 443, 501 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com High-speed boats in MP-design, Seabear, Alusafe and Weedo. Body sizes 5 - 25 metre.
ANCHOR CHAINS- Chains, wires & ropes System groups: 431 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations.
5-126_PR_2016.indd 9 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
10
ANCHORS- Anchors System groups: 431 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Anchors in all sizes in stock.
ANSI VALVES- Air & gas valves - Fluid valves & other armatures System groups: 35 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve
ANTENNA COOLING UNITS- Antennas & transmitters System groups: 411 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® Antenna unit type AM is a lightweight, compact cooling unit designed for cooling of antenna systems. The AM unit is equipped with compressor, evaporator and air-cooled condenser all fitted together in a “ready to use” unit. The AM can operate at surrounding temperatures up to 65?C. The units will be delivered with thermostat and complete control panel for easy operation. The AM Unit is a compact, flexible and quiet running air-condition unit. The unit is designed to operate inside or below radar domes in a non EX zone. The unit normally has a cooling capacity of 2,5 - 3.5 kW.
5-126_PR_2016.indd 10 07.08.2016 11:45:31
11
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
The unit is built in stainless steel chassis AISI 316 quality for long lasting lifetime. The construction is strong due to the harsh environment often found in demanding marine and offshore installations.
ANTENNAS- Antennas & transmitters System groups: 411 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Comrod is a world leader in the design and manufacture of commercial marine antennas. All products are designed and manufactured to maintain exceptional performance while withstanding the rigours of the marine environment. Antennas are available covering the HF, maritime VHF, Cellular & Wireless LAN frequency bands. Multiband antennas are also available covering combinations of frequency bands.
ANTENNAS, DEFENCE- Antennas & transmitters System groups: 411 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no
Forces worldwide choose Comrod products for their superior design and combat proven performance. Comrod has collaborated extensively with end users around the globe in the development of HF, VHF, UHF & SHF antennas for military applications. The result is a product line of sturdy broadband military antennas for tactical applications, consisting of handheld, manpack, vehicle, base station and shipboard antennas. The line includes combined antennas for VHF/GPS, VHF/UHF/L-Band, VHF/DECT, VHF/W-LAN, UHF/GPS, UHF/DECT and UHF/W-LAN. All antennas have been through full military testing for different programmes around the globe. Comrod sectional and telescopic support masts are used worldwide in heights from 5 metres up to heavy duty 34 metres. The sectional masts can elevate headloads up to 100kg and are available with electric winch and rotator tilter units as optional extras. The telescopic mast range is available in either push up, pneumatic, winch driven or electro-mechanical models up to 24 metres with headloads up to 100kg depending on the model selected. Comrod also manufactures passive and active military antenna combining systems for both vehicle and shipboard installations. The systems are primarily designed to reduce the number of antennas on a single installation. This allows the simultaneous use of several radios to one transmit antenna, or to individual directional antennas. A receiver distribution amplifier is included to allow simultaneous reception on all receivers.
5-126_PR_2016.indd 11 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
12
ANTENNAS, MARINE & CIVIL- Antennas & transmitters System groups: 411, 412 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Comrod manufactures a range of masts for civil and commercial applications. Mast configurations are available in composite sectional, composite telescopic and aluminium telescopic. Masts and accessories are in service worldwide with civil and commercial organisations for applications such as temporary mobile phone base stations, temporary lighting, elevation of optronic equipment, elevation of sensors etc.
ANTI-CORROSION AGENTS- Anti-corrosion System groups: 27, 28 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam
-hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
ANTI-CORROSION EQUIPMENT- Anti-corrosion System groups: 443 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
ANTI-CORROSION SYSTEMS- Anti-corrosion System groups: 27, 28 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling.
5-126_PR_2016.indd 12 07.08.2016 11:45:31
13
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
ANTI-CORROSIVE AGENTS- Anti-corrosion System groups: 27, 28 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.
ANTIFOULING- Anti-corrosion System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Seaquantum Ultra S - hydrolytic Seaquantum Classic S - hydrollytic Seaquantum Plus S - hydrolytic Seaquantum Static - hydrolytic Seaquantum Pro U Seamate MSeamate NB Seaforce 30
AUTOMATION SYSTEMS- Alarm equipment - Control & automation systems - Monitoring equipment System groups: 109, 381, 40, 79, 793, 795, 85, 87, 875 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no To control the system we deliver everything from simple, virtually maintenance- free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.
5-126_PR_2016.indd 13 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
14
SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering.
AXIAL FANS- Fans System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes
AZIMUTH COMBI THRUSTERS Azimuth Combi Thrusters - a unique Brunvoll solution The Brunvoll Combined Retractable Azimuth/Tunnel Thruster is a retractable azimuth thruster that can also be used as a conventional tunnel thruster. It provides unique opportunities for innovative and flexible use of thruster functionality for different types of vessels. Technical features - Locking device to secure in stowed position - Electric motor integrated in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance
AZIMUTH THRUSTERS, RETRACTABLE- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no RETRACTABLE AZIMUTH THRUSTERS Demand is growing for Brunvoll’s Retractable Azimuth Thrusters Brunvoll Retractable Azimuth Thruster Systems have proved their reliability in challenging applications for Offshore Service Vessels, Shuttle Tankers, Coast Guard, Navy, Fishing
5-126_PR_2016.indd 14 07.08.2016 11:45:31
15
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
and Research Vessels. These thruster systems provide manoeuvring capabilities that extend the operational weather window of the vessel, increasing capacity, flexibility, productivity, and safety. Technical features - Locking device to secure in stowed position - Electric motor in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance - Option for complete plug-in installation
BALL VALVES- Fluid valves & other armatures System groups: 6, 7 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves
BALLAST SYSTEMS- Purification plants & fluid treatment System groups: 801 OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com The type approved Optimarin Ballast System is based on filtration as pre-treatment and high doses of UV irradiation for inactivation of marine organisms, viruses and bacteria, without affecting the normal operation of the ship. Ballast water is UV treated both during ballasting and de-ballasting to ensure the dual UV effect. Ballast water is only filtered during ballasting. The OBS is one of very few treatment options that does not use or generate chemicals or biocides in its treatment or cleaning processes. It is based on the idea that such systems should be environmentally sound, simple, flexible and easy to install, and capable of operating on both newbuilds and existing vessels.
5-126_PR_2016.indd 15 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
16
The Optimarin Ballast System is easy to install on board existing ships (retrofit) as well as on newbuilds. The modulized system is very flexible, with a relatively small footprint and weight, and will fit vessels of all kinds and sizes. The OBS can be delivered as a complete skid or as a customized solution. It accommodates a wide range of ballast water capacities and can handle flows up to 3000 m3/h (or higher upon request). The Optimarin Ballast System is normally installed in the pump or engine room and in close proximity to the ballast pumps. The OBS can be delivered in a container, on a skid or in separate pieces to allow for easy installation in most any available space. The equipment can be installed horizontally, vertically, on or suspended below deck, along the ship’s side or in several separate locations. It is relatively low weight and adds no extra noise. The OBS utilizes every square meter and does not require much space, this makes it a cost-efficient solution.
BALLAST WATER TREATMENT SYSTEM- Purification plants & fluid treatment System groups: 801 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no TeamTec and Evonik Resource Efficiency GMBH have signed a cooperation agreement. Since February, 2016 TeamTec has taken over the manufacture, sales and service of the AVITALIS T BWTS. A filter and chemical injection system that ensures complete and environmentally benign BW cleaning in any temperature, salinity and turbidity.
BALLAST WATER TREATMENT SYSTEMS- Cleaning equipment System groups: 17 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Ballast Water Treatment System The Hyde Guardian BWTS offers an effective and reliable solution based on solids separation and UV irradiation. The Hyde Guardian system utilizes existing ballast pumps and piping. Standard systems are available for flow rates from 60m3/h up to 1500m3/h and customized systems up to 6000m3/h
BATTERIES- Accumulators, condensers, chargers & batteries System groups: 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no We supply a full range of batteries to all applications.
5-126_PR_2016.indd 16 07.08.2016 11:45:31
17
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
BATTERY BOXES- Bins, baskets, boxes and containers System groups: 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Battery containers and battery racks for all types of vessels LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no - Low weight - Maintenance-free - Self-extinguishing - Resistant to battery acid - Ventilated - Recommended by the Norwegian Maritime Directorate and Approved by Germanischer Lloyd
BATTERY CHARGERS- Accumulators, condensers, chargers & batteries System groups: 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Wide range of battery chargers and rectifiers. We can also supply custom solutions to meet most demands. Our Anda Power Solution is a ground breaking system for DC backup power for vessels.
BLOCK POSITIONING UNITS (BPU`)- Blocks & shackles System groups: 274, 344 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The TTS Block Positioning Units provide a single low cost tool for increasing throughput capacity in drydocks or on slipways. The BPU is a tool for the complete micro positioning/holding task of the double bottom block. This task is normally performed by large shipyard cranes and by using BPUs, the cranes will be free to perform other tasks, increasing the shipyards throughput capacity significally. The BPU s can be operated under a block with a minimum of 3 units. 4 units is the most frequently used setup. But even more units can be added to position larger blocks or ring units.
BOILER REPAIRING- Machinery and piping work System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Boiler repairing. PARAT has an extensive and continuously expanding global service and repair network. Through strategic partnerships we are able to serve our clients at almost any port around the
5-126_PR_2016.indd 17 07.08.2016 11:45:31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
18
world on short notice. We can perform repairs, modifications and upgrades both at port and during transit. All inquiries should be directed to our head office with 24 hour service. E-mail: [email protected] We are present with representatives or branch offices in the following countries: . USA . Brazil . United Kingdom . Namibia . Korea . Portugal . China . Denmark
BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat boilers. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our
clients and customers can rely on being handed the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close.
BOW EQUIPMENT- Structural work and surface treatment (plate, welder, paint) System groups: 2 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Bow Equipment For vessels requiring bow access, TTS offers bow equipment designed to meet the demands
5-126_PR_2016.indd 18 07.08.2016 11:45:31
19
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
of maritime safety. A great number of vessels have been successfully equipped with bow doors of side-swinging type combined with the TTS patented Folding Frame bow ramp solution
BOW PROPELLERS- Propellers & impellers System groups: 404 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon
BRIDGE SYSTEMS- Control & automation systems System groups: 42, 791, 875 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Automatic identification systems - AIS - Dynamic positioning - DP systems - Electronic logbooks, K-Log - Fleet Management Software - Integrated workstations - Joystick control system - Marine refit / Retrofit / Conversions - Navigator safety system - Position and reference systems - Radar and navigation systems - Ship information systems - Thruster control system - Voyage data recorders
5-126_PR_2016.indd 19 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
BUTTERFLY VALVES- Air & gas valves - Fluid valves & other armatures System groups: 57 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are
accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Spjeldventiler for skip, offshore og petrokjemisk industri.
5-126_PR_2016.indd 20 07.08.2016 11:45:32
21
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
CABIN UNITS- AC units, air dryers, air cooling and heating components System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® Marine Cabin Units and air terminals are designed for use in high speed marine air conditioning systems. Their task is to control the flow of air, its distribution and temperature. The units are tested for optimum performance. Important factors includes air throw, air induction, insulation capability and sound attenuation. We have a comprehensive range of Cabin Units. A range containing units for wall mounting or ceiling suspension, units for 1-pipe, 2 pipe, 1 pipe with reheat and a wide selection of air terminal units for low pressure systems. Air diffusers for the ceiling Cabin Units are available in square or circular shapes to fit ceiling panels. The Cabin Units is ready for easy and quick installation and may be delivered according to IMO resolution A.754 (18) for false ceilings with fire resistance rating B15. The units satisfies the Comfort Class requirements for noise, vibrations and indoor climate from Det Norske Veritas.
LONG LIFE SPAN: Vestnes Produkt AS workshop cabinets are specially adapted to be used on-board ships and offshore. We have developed the cabinets in cooperation with users from ships and offshore installations. This has resulted in a high-quality product with exceptionally good utility value. The use of thick electrolytically galvanized panels means the cabinets have a very long life span. The cabinets can also be produces in acid-proof stainless steel. PRACTICAL SOLUTIONS Our cabinets are made from 1.25 mm thick panels, giving a high-quality finish. The sides, back, shelves and door frames are screwed together to ensure good stability and prevent rattling. The doors on our biggest cabinets have threepoint fastenings. The doors are assembled in an all-welded frame to prevent dust from getting in. The cabinets can be delivered without doors and with open shelves, which have a front lip to prevent objects falling out. The drawer shelves have a spot-welded lining and come withdrawer stops. All our models are made of electrolytically galvanized panels, have strengthened bases and are powder coated in colour RAL 9002 (light grey) FITTING The cabinets can be delivered pre-assembled by the manufacturer or in kit-form for the customer to assemble on board. A fitter form Vestnes is also available if required. All our cabinets come with assembly instructions. There are 12 standard layouts, but the cabinets can be installed as you wish. If you require internal fittings made to measure, we are happy to help.
5-126_PR_2016.indd 21 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
22
CABINETS FOR EQUIPMENT- Bins, baskets, boxes and containers System groups: 48 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra GRP Equipment Cabinets: The cabinets are used for Life Jackets, Survival Suits, Stretchers, Fire Fighting Equipment, First Aid Equipment, etc. LIGHT WEIGHT - THERMAL INSULATION - NO CORROSION
CABLE GLANDS- Power cables System groups: 88 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Cable glands Exe / Exd Tranberg’s Exe and Exdcable glands, stopping plugs, drain plugs, adaptors and reducers are provided with O-ring seal to secure ingress protection. Made ofbrass or Stainless Steel AISI 316 material. Fully compliant with the latest ATEX/IECEx standards.
CALIBRATION EQUIPMENT- Meters & indicators - Workshop equipment System groups: 442 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Calibrators Matre calibration equipment is designed for the adjustment of thermostats and pressure-switches. The intention is to meet the demands and needs by the classifying authorities regarding the calibration of sensors in unmanned engine rooms. Common to all Matre calibrators is that they are very easy to use, dependable and easily portable. Matre Calibrators have obtained great recognition and are delivered to ship and yards worldwide.
CAMERA SYSTEMS- Control & automation systems - Subsea & seismic equipment System groups: 1, 414, 481 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Underwater Camera Systems - Industrial CCTV Camera Systems - Harsh Environment CCTV Systems: - Offshore Drill Support CCTV - Commercial Vessel CCTV
5-126_PR_2016.indd 22 07.08.2016 11:45:32
23
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
- Other Marine CCTV - Naval Ships CCTV - Naval Submarine TV - Naval Underwater Vehicle and Diver Deployed Cameras TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Camera Systems For any operation onboard a vessel a high quality camera monitor system is an added value. Whether being used for a view of the engine, deck areas or Heli deck, a camera system will give the operator an overview of all operations in one view. With the possibility of choosing between a fixed, zoom or pan & tilt zoom camera observation; the right type of camera can be selected for any of the processes.
CANVAS PRODUCTS- Scaffolds, jigs & tarpaulins etc. System groups: 316 PLANY AS 6082 Gursken Telephone: +47 70 02 68 20 Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no Plany heavy-duty canvas .Any size or colour .Experience .Tailormade .Customized after customer needs
CARGO CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Cargo Cranes - Cylinder Luffing TTS Cargo Cranes are designed to handle a wide variety of lifting applications. The range comprises standard designs and tailor made solutions as required by the customer. The cranes are designed and built to meet all requirements from ILO as well as relevant authorities, and can be certified by any recognised Classification Society.
CARGO PUMPS- Cargo handling equipment System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com LFL* Special Cargo Pumps Engineered solutions in full compliance with APEx / IMO 673 a.s.o. OSV Cargo Pumps PG-MACS patented, proprietary Multi Applicatio Cargo Solution
5-126_PR_2016.indd 23 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
24
CARGO REFRIGERATION- Cargo handling equipment System groups: 3 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Teknotherm cargo refrigeration plants can be supplied for ships carrying food for human consumption and industrial solids or liquids. Refrigeration plants for full size reefers or partly refrigerated vessels carrying frozen or chilled goods are available as two different systems. Either as direct system with evaporation of the refrigerant directly in the aircoolers, or as indirect systems by means of circulating cold brine through the aircoolers. Teknotherm refrigeration plants for cooling of low boiling point liquids on board chemical tankers or product carriers are normally designed as indirect systems. The cargo is cooled by means of circulating a cold water/glycol mixture through cooling coils located in each cargo tank.
- Crude Cargo Systems - Deepwell Pumps - Gas Cargo Pumps - High Temp/High Viscocity Systems - Hydraulic Power Packs - LFL Special Cargo Pumps - Liquid Mug Agitators - OSV Cargo Pumps - Tank Cleaning Machines - Acid & Toxic Cargo Handling Solution
CEILINGS- Interior floor, wall & ceiling covers System groups: 511 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.
5-126_PR_2016.indd 24 07.08.2016 11:45:32
25
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
CENTRAL HEATING BOILERS- Boilers, burners and incinerators System groups: 577 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat central heating boilers.
CENTRIFUGAL FANS- Fans System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution.
The largest stock of ship’s chains in The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations. Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D - Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles
5-126_PR_2016.indd 25 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
26
CHAIRS, PILOT CHAIRS- Bridge inventory & equipment - Furniture & cabinets System groups: 541 ALU DESIGN & SERVICES AS 4636 Kristiansand Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Think future Comfort No one else combines usability, functionality and innovation with this level of comfort. Our ergonomic expertise allows us to create chairs that become a seamless extension of the user - encapsulating them in an environment tailor made to maximize performance and minimize fatigue. Total control through absolute comfort.
CHECK VALVES- Air & gas valves - Fluid valves & other armatures System groups: 309, 513 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also
accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
COATINGS- Coatings & paint System groups: 443 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.
5-126_PR_2016.indd 26 07.08.2016 11:45:32
27
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
COMMUNICATION- Radio & telephone communication System groups: 412, 42, 421, 423 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex The Maritime Broadband Radio (MBR) is developed for use in maritime applications where digital high-speed reliable communication and data transfer are crucial for efficient and safe operations. MBR operates in the 5 GHz frequency band and has proven high capacity communication over distances in excess of 50 kilometres. Operating as a maritime “information highway”, the MBR connects crews and their vessels with a high-speed and high capacity digital communication channel with “fast track” priority options. The system can securely carry a diverse array of op¬erational information, from real-time video to system data, and remotely situated teams can work together seamlessly, co-or¬dinating systems and activities for optimal performance, safety and operational success.
COMPOSITE PRODUCTS- Additives & agents System groups: 196 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no These are custom-designed products for commercial and defence applications. Structural composites can be divided into the following product categories:
COMPRESSORS- Compressors System groups: 73 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Sundstrand International Corporation S.A, Belgium Centrifugal compressors and blowing machines. TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Refrigeration compressors from: Mycom, Japan Grasso, The Netherlands York, United Kingdom/USA Carrier, USA Bock, Germany Hall, England RefComp, Italy Service.
5-126_PR_2016.indd 27 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
CONTAINERS- Bins, baskets, boxes and containers System groups: 315, 317 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Our AERON® container’s can be delivered both for marine and offshore applications. These can be delivered fully insulated and with necessary light, ventilation, cooling and heating. You only need to supply electricity and necessary water and ventilation ducts. We may deliver containers for storage of special equipment in ATEX or non ATEX, and containers with complete HVAC-R systems for accommodation or technical rooms. The systems may be designed according to customers’ requirements and all will be delivered in accordance with relevant rules and regulations. Typical applications: . Storage of lithium battery packages in ATEX with necessary HVAC
. Storage of painting equipment in ATEX with necessary HVAC. . Container with complete HVAC Systems for accommodation . Container for cooling of Instrumentroom or Technical rooms . Container with complete provision room cooling system . Containers for temporary refuges with necessary equipment. . Other tailor made solutions in ATEX or non ATEX. Examples of AERON® HVAC container. . Containers with Mist Eliminator louvers, Air Handling Units, fans etc. . Refrigeration machinery with air-cooled or water cooled condensers. . Cooling system with necessary heat exchangers, integrated pumps. . Complete solutions with integrated PLC automation & control system. LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Plast AS have many different GRP containers. Click on the usage area thats closes to your requirement. Libra GRP Battery Containers: Libra supplies between 500 and 1000 battery containers per year for the marine industry. Type Approved by GL. LIGHT WEIGHT - NO CORROSION Libra GRP Containers: Libra produces GRP Containers for multiple purposes for the offshore industry. They are mainly used to store MOB and Emergency Equipment on deck.
5-126_PR_2016.indd 28 07.08.2016 11:45:32
29
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
You can find the following examples of a MOB Equipment Storage Cabinet Libra GRP Life Jacket Containers: Libra supplies Life Jacket Containers for the marine industry. Typical customers are Ferries, Passenger Vessels and Cruise Vessels. LIGHT WEIGHT - NO CORROSION
CONTROL AND MONITORING SYSTEMS- Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381, 40, 79, 793, 795, 85, 87, 875 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7
CONTROL LEVERS- Regulators & switches System groups: 791 LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no Norways largest manufacturer of Control Levers. Supplier to leading system manufacturers all over the world. -Control lever: Type LF 50, Joystick -Control lever: Type LF 60, Joystick -Control lever: Type LF 70, to operate azimuth propellers -Control lever: Type LF 80, Rudder control -Control lever: Type LF 90, to operate propulsion and thrusters -Control lever: Type LF 120, for maoeuvering of propulsion and thruster unit -Control lever: LF 150, steering wheel -Control lever: Type LF 180, for manueuvering of propulsion units - simple, one-axis control levers in different sizes, hand wheels, rudder controls, azimuth control units and multi-axis joysticks
CONTROL STATIONS- Control & automation systems System groups: 196 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com
5-126_PR_2016.indd 29 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
30
Control Stations Tranberg control stations with various numbers and types of pushbuttons, lamps etc.enableflexible sizes and solutions. Only using Stainless Steel AISI 316 and fully compliant with the latest ATEX/IECEx and NORSOK standards.
CONTROL SYSTEM- Control & automation systems OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com The Ballast Control System allows easy operation of the Optimarin Ballast System.User-friendly interface. - Touch screen operation. - Interface with ship’s main systems. - Logging in accordance with IMO requirements. - Option of integrating ballast pumps and valves.
CONTROL SYSTEMS- Control & automation systems System groups: 109 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no To control the system we deliver everything from simple, virtually maintenance- free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems,
valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.
CONTROL VALVES- Air & gas valves - Fluid valves & other armatures System groups: 442, 6, 7 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve
5-126_PR_2016.indd 30 07.08.2016 11:45:32
31
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
CONVERTERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 42, 867 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Wide range of DC/AC and DC/DC converters to meet any demand.
COOLING SYSTEMS- AC units, air dryers, air cooling and heating components System groups: 362, 554 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Broadly assortment to freezing systems for merchant fleet and fishing fleet. For the merchant fleet we deliver cooling- and freezing systems for: Solid and liquid cargo, provisions, aircondition, inert gas and CO2. For the fishing fleet we deliver freezing systems for cargo, RSW and various freezing equipment. Service.
COOLING WATER TREATMENT- Cooling components for fluids - Purification plants & fluid treatment System groups: 722 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
CRANES- Cranes, crane equipment, lifting devices & booms System groups: 33, 45 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Cranes by PALFINGER MARINE are designed to meet the safety standards and extreme environmental conditions of the marine and offshore industry. PALFINGER MARINE and PALFINGER DREGGEN offer a comprehensive product range of knuckle boom, stiff boom and telescopic boom cranes as well as wire luffing and travelling cranes for various applications within the shipbuilding and the oil and gas industry worldwide.
5-126_PR_2016.indd 31 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
32
CRUDE CARGO SYSTEMS- Cargo handling equipment System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Crude Cargo Systems Electric, hydraulic, or steam turbine driven cargo solutions for tonnage up to ULCC\’s
DAMPERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 109 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies.
DAUGHTER CRAFTS- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe has a wide range of daughter craft designed to operate away from the mother ship or offshore installations for extended periods of time. The primary function is to search for and rescue persons lost at sea. Effective search and recovery require a fast rescue craft with excellent reliability, manoeuvreability and sea keeping abilities. Combining these functions, Norsafe boats are suitable for all types of marine SAR missions. The daughter craft are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. We have daughter craft which fully comply according to current IMO requirements and all equipment has been approved in accordance with latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice.
5-126_PR_2016.indd 32 07.08.2016 11:45:32
33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
DAVITS- Davits and masts System groups: 501, 502 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Harding’s unique Totally Enclosed Davit concept has established a new standard when it comes to safety, cost of installation and savings on mainetnance cost. The integration of highly efficient electrical and hydraulic systems into the davit structure provides optimal protection against wear and tear. The Total Enclosed Davit’s is intended for long term, reliable operation in harsh and hazardous marine and offshore environment. Then enclosed design also makes a perfect fit for operation under arctic climate conditions. Our davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98 on Marine Equipment (MED). The carefully considered and epoch-making design of our NPD system is an advantage when it comes to maintenance and service, installation and deck preparations and for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch Ship Davits: Harding NPD series davits are specifically designed for safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments
Rig Davits Harding NRD-series davits are specifically designed for the safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments. The davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98 on Marine Equipment (MED). Its carefully considered and epoch-making design, is an advantage when it comes to maintenance and service, installation and deck preparations, and also for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch. Our FAD davit system is ideal if you need flexible hook distance. The fixed arms can be situated on deck according to your applicable hook distance. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Davits suitable for all MP craft can be offered in package with the craft. In co-operation with major davit manufacturers, Maritime Partner can deliver davits or cranes specially designed for all MP-craft. An optimal solution to fit on any vessel can be tailor made. Both for newbuildings or retrofitted to existing vessels.
5-126_PR_2016.indd 33 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
34
NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Lifeboat davits: - A-frame cantilever davits for marine and offshore. Life boats - “A Series” - Cantilever davits for platform installations and similar. Life boats - “C Series” - Cantilever davits for platform installations and similar. Life boats - “D Series” - Single pivot gravity davits for ships and similar. Life boats - “E Series” - Low build luffing davits for restricted height installation. Life boats - “LH Series” Rescue boat davits: - A-frame luffing davits for rescue & fast rescue boats - “NDA Series” - Cantilever davits for rescue & fast rescue boats - “NDC Series” Combi davits for rescue boats/ liferafts: - Slewing davits for life rafts and rescue boats - “NDSC Series” Free fall boat davits: - Free fall boat davits for ships and offshore installations. Lifeboats - “HD” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “H” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “SW” Series SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Davits
DECK RAILS- Bridge inventory & equipment - Furniture & cabinets System groups: 541 ALU DESIGN & SERVICES AS 4636 KristiansandTelephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Certified excellence Alu Design invests in a comprehensive programme of testing and certification. It is our aim to demonstrate that every one of our products is built with care, precision and quality, complying with the market’s most exacting standards. When you sit in an Alu Design chair you can relax, safe in the knowledge that there is simply no better seat.
5-126_PR_2016.indd 34 07.08.2016 11:45:32
35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
DECK SELFSMOOTHING SCREED- Interior floor, wall & ceiling covers - Sections, foundations, pillars, structural units and bulkheads System groups: 524 SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound
DECK SYSTEMS- Cranes, crane equipment, lifting devices & booms System groups: 3, 32 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Streamer Handling System - Gun handling systems - Wide Tow Handling System - Back-deck control system - Additional seismic products - Bulk Hose Securing Unit - BHSU - eBird - Seismic cable control - Flush Manhole covers - RoJo Quick Hatch - Helideck Monitoring System - HMS 100 - Launch and Recovery System - LARS for AUV and ROV - Marine cranes - Movable Deck Extender
DEEPWELL PUMPS- Pumps & pump units System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PG-SLB 125 Low Share Twin-screw Deepwell Pumps All stainless steel / duplex steel chemical cargo-handling pumps, based on twin-screw pump technology.
5-126_PR_2016.indd 35 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
36
Positive displacement, low share, and vertially pulsation free performance with capacities up to 100m3/h and 9.0 BarG NOFO 2005-conform, hydraulically driven, ex-proof execution
DEHUMIDIFIERS- Air and gas treatment (dehydrators, air separators) System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no High relative humidity increases the risk of corrosion, mildew, rot and problems in electronics. Humidity reduction and control has proved to be the best and most cost efficient remedy against such damage. Alfsen og Gunderson AS has since 1965 presented leading solutions based on dry air technology and humidity control. - Tank drying equipment for chemical tankers. - Cargo hold dehumidifiers - AG Air Dryer for blasting and planting. - Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2
DIAPHRAGM VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
5-126_PR_2016.indd 36 07.08.2016 11:45:32
37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
DOCKING SUPPORT ARMS- Repairs, modifications & docking System groups: 144 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com TTS Docking support arms can be incorporated into the TTS Transfer System, or be delivered as individual units to be placed, for example, in a drydock. The docking support arms consists of a basic cradle design with a keel blocks and hydraulically operated tilting arms. The tilting arms have wooden bilge blocks gimbaling at the end. This support conforms to the shape of the hull. During docking, the tilting arms rise and press on to the hull with a minor force of one metric tons, while they resist the force of 50 metric tons. When the ship is dry, the arm is secured with a bolt. The TTS Docking Support arms are operated from a mobile hydraulic power pack. .TTS Docking Suppport Arms can significantly increase your docking capacity by increasing the docking productivity .The systems saves human power and gives the ship an exact docking position
Building ring units or blocks weighing some 1,200-2,000 tonnes, instead of blocks weighing 2-400 tonnes, will significantly reduce the building time in dock. The docklift concept is based on assembling 2-400 tonnes blocks into ring units weighing up to 2,000 tonnes.
DOORS- Interior doors & windows - Watertight/weathertight doors & windows System groups: 51 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Watertight doors. Weathertight doors. Watertight and weathertight in A0 and A60. Spraytight bulkhead doors, insulated. Hatches, flush/raised VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com
5-126_PR_2016.indd 37 07.08.2016 11:45:32
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
38
TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.
DOORS, LIGHTWEIGHT- Watertight/weathertight doors & windows System groups: 513, 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Accommodation Composite Doors (AC): Lightweight, non-combustible interior doors for High-Speed and Light Craft Vessels. EXTREMELY LIGHTWEIGHT - EASY TO INSTALL - GOOD DESIGN Libra Lightweight Sandwich Doors (HSC): Libra Lightweight Doors (HSC) have been designed to comply with the HSC code (High-Speed and Light Craft regulations). In addition, these doors are ideal for Ferries, Cruise Vessels, Marine Vessels, Yachts, etc.
DOORS, SPRAYTIGHT- Watertight/weathertight doors & windows System groups: 513, 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Spraytight GRP Doors (ISD): Libra Spraytight Doors (ISD) are made from Glassfiber Reinforced Polyester (GRP) composite. The weight of the GRP Doors is only 1/3 of steel doors and the sandwich construction gives them excellent thermal insulation. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. .Steel or Aluminium coamings .Single dogs or Quick Acting .Delivered with either 30mm or 100mm corner radius Libra Spraytight Steel Doors and Hatches (SR): Libra Spraytight Doors (SR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. Libra Spraytight Aluminium Doors and Hatches (SR) Libra Spraytight Doors (SR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck.
5-126_PR_2016.indd 38 07.08.2016 11:45:33
39
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
DOORS, WATERTIGHT- Watertight/weathertight doors & windows System groups: 513, 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Watertight Steel Doors and Hatches: Libra Watertight Steel Doors have DNV type approval certificate and comply with International Load Line Convention 1966 DNV-OS-C301, the Norwegian Veritas’ rules for Classification of Mobile Offshore Units. Libra Watertight Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate water plane according to damage stability calculations. Libra Watertight Steel Doors may also be used in connection with SOLAS Chapter II-1 Part B Regulation 20-2.2, and the Stockholm Agreement. Libra Watertight Steel Doors may also be used below bulkhead deck in positions where a hinged door is acceptable, and where the actual water pressure is 50kN/m2 or less. Libra Watertight Aluminium Doors and Hatches: Libra produces Watertight Aluminium Doors on request. These doors will be made in accordance with the requirements set by Classification Societies.
Libra A-60 Fire-rated Watertight Steel Doors and Hatches: Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Watertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations/Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Watertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. Libra Watertight A-60 Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate waterline according to damage stability calculations. The Libra Watertight A-60 Steel Doors may also be used on cargo vessels (SOLAS Chapter II-1 Part B-1 Regulation 25.9) above equilibrium or intermediate waterline according to damage stability calculations, and these doors can also be used in connection with SOLAS II-1/20-2.2 and the Stockholm Agreement. Libra Watertight A-60 Steel Doors may be used below bulkhead deck in positions where a hinged door is acceptable and where the actual water pressure is not greater than the design pressure given by DNV.
5-126_PR_2016.indd 39 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
40
DOORS, WEATHERTIGHT- Watertight/weathertight doors & windows System groups: 514 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra Weathertight GRP Doors (WTD): Libra Weathertight Composite Doors and Hatches are built in compliance with the International Load Line Conventions and are Type Approved by most Classification Societies. LIGHT WEIGHT - EXCELLENT THERMAL INSULATION - NO CORROSION. Libra Weathertight Steel Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as external bulkhead doors on weather deck (positions 1 and 2), where sill height of 380 / 600mm is required. Both standard and custom sizes are available. Libra Weathertight Aluminium Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as
external bulkhead doors on weather deck (position 1 and 2), where sill height of 380 / 600 mm is required. Libra A-60 Fire-rated Weathertight Steel Doors and Hatches: Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Weathertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations / Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Weathertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. The Libra Weathertight A-60 Steel Doors may be used in access openings according to DNV Ship Rules Part 3 Chapter 3 Section 6 and the International Convention on Load Lines Chapter II Regulation 12
DRINKING WATER FILTERS- Fluid filters - Freshwater generation System groups: 584 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com
5-126_PR_2016.indd 40 07.08.2016 11:45:33
41
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.
DRINKING WATER TREATMENT- Freshwater generation System groups: 584 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no AG possesses all technologies for treatment of drinking water and process fluids. That includes UV-sterilizers, simplex- and duplex basket filters, automatic backwash filters and mediafilters with fine ceramic media or activated carbon. ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling.
EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.
DROPPED OBJECT PROTECTION- Aluminium MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no On the topsides, the Dropped Object Protections are used for protecting decks or equipment. The Protections can be made in small panels or large protective decks and are used where swinging objects may be lifted above critical equipment. The panels can be designed to withstand the load from falling objects like drill collars, containers etc.
5-126_PR_2016.indd 41 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
42
DUAL WALKING BEAM (DWB)- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The Dual Walking Beam (DWB) units are individual working machines, completely self-contained. They are simultaneously or individually controlled by one operator with a portable hand held control station. .A trackless Transfer System for Ship Sections .Smaller Ships and Heavy Loads .Load range: 200 tonnes up to 12.000 tonnes
EJECTORS- Ejectors - Maintenance, spare parts and supplies System groups: 356 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Ejectors E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Stripping Ejectors - reliable and indispensable jet pumps. TeamTec has more than 50 years experience with production of stripping ejectors, and has supplied over 75 000 units worldwide. The stripping ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. TeamTec Stripping Ejectors are superior for all-purpose stripping and have become
an important part of the standard equipment on modern new buildings. The main areas of application for the TeamTec Stripping Ejectors are stripping of cargo tanks, ballast water tanks, cargo holds, engine rooms and bilge, vacuum cleaning engine rooms, as well as emergency stripping. With a combination of high quality material and skillful construction TeamTec supplies effective solutions to meet onboard requirements. Other TeamTec ejector types and products related to specific purposes: i.e. mud mixing, degassing, vacuuming and evacuation of air, gas. TeamTec’s design and production of ejector types is flexible in accordance with the customer’s requests. The TeamTec Stripping Ejectors are produced in Ni-Al-Bz, stainless steel and super duplex.
ELECTRIC MOTORS- Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 867, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional
5-126_PR_2016.indd 42 07.08.2016 11:45:33
43
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
advantages include the reliable bearing design as well as rotors with aluminum die-cast cage for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs.
ELECTRICAL ANTI-ICE/DE-ICE- Electrical and electro work System groups: 88 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com As the world market leader we provide tailor made solutions certified by DNV-GL. Delivered to more than 60 projects worldwide.
The PARAT Electrical circulation steam boiler was designed to meet the request for a modular and easy to install alternative to MGO fuel for auxiliary boilers on existing vessels in operation. By integrating the ECS in your boiler you have the option to maintain your steam pressure from an electrical power source (shore power, spare generator power etc.). The unit can be installed on any kind of existing steam boiler system and is also a good solution for newbuilds where increased fuel flexibility for the steam system is required. The electrical cabinet is not directly connected to the boiler unit. This ensures a low temperature in the electrical components. The cabinet is standardized, and type approved according to the NEK 400. Included are fuses, contactors and complete safety system. As an option the unit can be delivered with a main power switch. The boiler unit is designed for vertical or horizontal installation depending on the layout and space availability around the main auxiliary boiler. Inlet and outlet connections to main boiler will be done on site. The ECS can be delivered as a standard modular unit in capacities up to 400kW, which is equivalent to 600kg steam per hour. Larger capacities can be provided upon request. ELECTRICAL STEAM BOILERS The Parat Electrical element boiler can be delivered with capacity up to 5000 kW. With our 40 years of experience in marine boilers PARAT has landed on a rugged design that fulfills all class requirements. The electrical element boiler is very compact, and one of the greatest advantages with this product is the possibility of low load regulation, down to 15 kW. No smoke stack is needed, thus saving space and costs. The electrical cabinet is not directly connected to the boiler. This ensures a low temperature in the electrical components. The cabinet is
5-126_PR_2016.indd 43 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
44
standardized, and type approved according to NEK 400. Included in the cabinet is the main switch, fuses, contactors and a complete safety and control system. This system is based on a Siemens PLC SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible, via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system. For vessels with ORO operation class, Parat has developed a successful package containing a heat exchanger for the hot water system and steam lances for heating of the ORO tanks. The patended Parat MEL-C was developed to meet the demand for a compact and flexible system that allows the operator to use one boiler system for both steam and hot water production. In normal operation the boiler generates hot water at an operating temperature of 90oC. When there is a requirement for steam production the water level in the boiler is reduced to provide a sufficient steam separation area. Hot water production is maintained separately by an electric heater in a bypass circuit. The MEL-DC was developed to enable connection to direct current power supply. It is based on our standard MEL low Voltage boiler but with specialized immersion heaters and control panel.
ELECTRICAL INSTALLATION EQUIPMENT- Electrical and electro work System groups: 85, 87, 88 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Installation Equipment Tranberg’s installation equipment is made to reduce installation and maintenance costs for yard andship-owner. Using only cast brass and stainless steel, manufactured to the highest standards.
ELECTRO BOILERS- Boilers, burners and incinerators System groups: 644 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Electrical boilers With decades of experience with various electrical steam and hot water boilers for land based industry PARAT is in a unique position to provide boilers for vessels with modern and often ground breaking propulsion and power generation systems.
5-126_PR_2016.indd 44 07.08.2016 11:45:33
45
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Zero emissions, small footprints and simple installation and operation make our electrical boilers the perfect solution for steam and heat generation aboard the futures most energy efficient vessels. The following pages give a brief introduction to our electrical boiler range.
EMERGENCY MEDICINE CARE- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no A medical quality assurance tool coupled with telemedicine: ShipMed® Safety System ensures simple and safe operation of the ship’s hospital. The medical quality assurance tool lays the foundation for securing life and health on board and has been developed by medical personnel with long experience in ship medicine, in close cooperation with the maritime business, and according to Norwegian and International standards and regulations. ShipMed® Safety System assures the hospital stores and provides a full overview of the stock, expiry dates, distribution and purchase of medicines and medical equipment, as well as reports for stock, consumption and purchase. The software also provides a guide to use of medicines and medical equipment, a quick reference for medical equipment for different injuries and video clips showing various medical procedures.
The quality assurance tool is available in Norwegian, English and Portuguese, and covers lists of ships medicine for a wide variety of flag states. Telemedical solution: ShipMed® Safety System offers an option for telemedical solutions on board ships through ShipMed® Premium membership. The solution is coupled to the quality assurance tool, and increases the likelihood of reaching a diagnosis and administering treatment quickly. It allows for contact between vessels and doctor on shore with moving images and sound, as well as transfer of medical data such as ECG, pictures and text. In that way, illness, pains and visible injuries can be properly described and communicated, and correct treatment or evacuation can start quickly
ENCLOSURE SYSTEMS- Control & automation systems System groups: 41 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Tranberg develops, manufactures and distributes: ENCLOSURE SYSTEMS Junction boxes/Instrument enclosures Cable glands Panel building Switches & Distribution systems
5-126_PR_2016.indd 45 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
46
ENGINE ROOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 4 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Overhead travelling bridge design, capacity of up to SWL 40 t - Handling of provision and machinery parts below deck level - Two main designs: standard headroom mono-beam design and ultra-low headroom dual-beam design - Electric, pneumatic or hydraulic power supply
ENGINE ROOM SYSTEMS- Control & automation systems System groups: 79, 791 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Electronic logbooks, K-Log - Engine monitoring systems - Fleet Management Software - Marine automation systems - Marine refit / Retrofit / Conversions - Marine switchboards - Process control systems, K-Pro - Propulsion control systems - Safety system, K-Safe - Ship information systems
EQUIPMENT CABINETS- Furniture & cabinets LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no The Libra equipment cabinet is available in many standard sizes and we also supply sizes in accordance with the customer’s requirements. Shelf arrangement (vertical or horizontal), heating, lighting, etc., are supplied in accordance with requirements and adjusted in each individual case.
5-126_PR_2016.indd 46 07.08.2016 11:45:33
47
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Main features: - Material: Fire retardant GRP - Low weight - Minimal maintenance - Central Closing Device - Corrosion- free - Layout/arrangement in accordance with requirements - Standard sizes + customized sizes on request - Double doors or roller front arrangement. - Standard colours: white, red or green - Side-by-side door arrangement or alternatively roller shutter
EXHAUST BOILERS- Boilers, burners and incinerators System groups: 646 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat exhaust boilers for hot water and steam. Utilizing the waste heat from engines and generators is a good way to save fuel and space and at the same time reduce harmful emissions to the atmosphere . Parat specializes in custom designed boilers and economizers for any vessel and engine type with the focus on providing the user with the most compact and efficient solution available. Since the worlds first composite boiler left our factory in 1972, we have continued innovating and are able to supply any standard or custom made heat recovery solution for all kinds of engines or generators. The following pages
give a brief overview of our products under the category exhaust gas boilers. EXHAUST GAS SMOKE TUBE BOILER The smoke tubes pass through the boiler and the exhaust gas flows inside the tubes. This construction makes the boiler suitable for connection to more than one engine with separate exhaust gas sections in one boiler. The boiler can either work with forced circulation with evaporation in a separate steam drum or as a natural circulating boiler with a built-in steam drum at the top. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boiler is pre-assembled and delivered as a complete unit. EXHAUST GAS WATER TUBE BOILER The water tube boiler consists of finned tube or bare tube bundles mounted together in sections. The water circulates through the tubes and the extended heating surface on the exhaust gas side makes this boiler compact. The water flow is generated by circulation pumps and evaporation takes place in the boiler. The water/steam mixture is then separated in a steam drum or in an auxiliary boiler. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boilers are pre-assembled and delivered as a complete unit. Needs proper water treatment and cleaning. SMOKE TUBE / EXHAUST GAS BOILER The boiler is of vertical design with smoke tubes through the boiler and steam evaporation at the upper section. The boiler is constructed from drawings approved by all classification societies and delivered with equipment in accordance with class requirements. The combination of both an oil fired section and
5-126_PR_2016.indd 47 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
48
exhaust gas section in the same boiler leads to a simpler and more economical steam system on board. A two in one system is less expensive to install than two separate boilers. A combined system is easy to service and maintain, thus providing cost savings during the lifetime of the ship. Capacity of the exhaust gas section will depend on the exhaust gas quantity and temperature. The principle of the boiler is based on a common water and steam space and separate sections for oil firing and exhaust gas. If several engines are utilized, the boiler can be delivered with several separate exhaust gas sections. The boiler comprises smoke tubes both for the oil fired and the exhaust gas section. From the top of the boiler there is good access to the tubes which make service and maintenance easy. A main feature of the boiler is its automatic mode. When this mode is activated, the exhaust gas section becomes the main heating source. If the capacity is too small and the steam pressure drops, the oil burner automatically ensures correct pressure. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. Operation of the boiler control panel is done from the local touch screen. Boiler PLC can be connected to the main control system by standard ethernet/profibus/modbus communication.
EXTERNAL SIDE DOORS- Watertight/weathertight doors & windows System groups: 514 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com External side doors Offshore vessels are often built to comply with specific customer demands and are therefore tailor-made. TTS Ships Equipment offers a variety of equipment configurations to help meet these needs. The purpose of an offshore ROV (Remote Operated Vehicle) side door is mainly to deploy and retrieve subsea vehicles. The door must be designed to withstand operation in heavy seas and rough weather. TTS Ships Equipment delivers a number of different door configurations, all designed for operational flexibility, reliability and watertightness. .Top hinged .Side hinged .Bottom hinged .Sliding .Roller gate .Railing door .External Door/platform
5-126_PR_2016.indd 48 07.08.2016 11:45:33
49
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
FAIRLEAD SHACKLES- Blocks & shackles System groups: 274, 32 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Mandal Fairlead Shackle - Stainless steel mooring shackle with sleek shape designed to pass through fairleads. Available in two sizes 90 M and 120 M.
FANS- Fans System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no We are offering all types of fans needed to create an optimal ventilation system for marine and offshore applications. With requisite certificates according to class and governmental requirements. Axial Fans Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes at relative small pressure drops. Explosion- Proof Fans for Hazardous Area Hazardous areas onboard offshore rigs, chemical tankers, oil tankers and gas carriers, have very stringent requirements
with regard to design and execution of the ventilation fans, concerning safety. We offer a wide range of special fans for installation in hazardous areas. Centrifugal Fans Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution. Dampers and Fire-dampers We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies. Silencers We deliver any type of square and circular high efficiency silencers.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
50
FENDER DAVITS- Davits and masts System groups: 501 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Fender Davits: TTS Marine AS is a supplier of dual point davits for fenders. TTS is specialized in creating solutions to meet your requirements. We are able to offer davit and Yokohoma fender as a complete package
FILTERS- Fluid filters System groups: 584, 6 OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com Optimarin offers three different 40 micron filters: FilterSafe basket type, B&K candle type, and Filtrex basket type filter. All three filter types have automatic back flushing and are self-cleaning. Removes large particles and organisms. Low pressure loss of only 0.1 - 0.5 BAR. Horizontal or vertical installation. Bypassed during de-ballasting.
FIRE FIGHTING SYSTEMS- Firefighting equipment System groups: 376, 505, 57, 81, 813 WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no A Norwegian based company, developing and producing all types of active fire fighting systems. WME also carries out research and development of Water Mist Nozzles and systems. WME performs: . Site study . Design . Engineering . Fabrication . Testing . Installation . Commissioning/Start-up Our working areas cover Oil & Gas, Petrochemical, Offshore & Marine Industry as well as Air Craft Hangars and Building market. Our commitment to excellence is based on a deep and wide experience in both Fire Engineering and Water Mist Technology. Our well-trained staff have backgrounds in the North Sea Offshore area. Among our staff you will find Fire Cybernetics and Machine Engineers. When you purchase WME products you are buying the finest fire fighting equipment possible. Our well-trained and experienced project staff will execute your order in the most professional way.
5-126_PR_2016.indd 50 07.08.2016 11:45:33
51
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
FIRE FIGHTING SYSTEMS DIFFS / NUI- Firefighting equipment System groups: 819 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Deck Integrated Fire Fighting System (DIFFS) Matre Deck Integrated Fire Fighting System (DIFFS) - specially developed to extinguish fire on helidecks. An activated DIFFS system will extinguish a major spill fire on the helideck within 15 seconds. Although - tests have shown that such fires in most cases are extinguished in less than 10 seconds. Matre DIFFS can be automatically activated by detection system or manually by release panels (push buttons). Rescue personnel can safely perform rescue operations on the helideck even when the system is fully activated. Matre DIFFS can be used on many various installations and can be customized according to customer specifications. Today Matre DIFFS is used on various offshore installations as well as yachts and roof top helidecks. DIFFS consist of foam mixing skid and Matre pop-up nozzles. Matre DIFFS is designed in compliance to all applicable standards and regulations (CAP437, NORMAM27, ICAO, NMD, NORSOK). Matre Systems for Normally Unattended Installations: Normally Unattended Installations (NUI) can
now be equipped with Matre’s Deck Integrated Fire Fighting System (DIFFS) or Ring Main System (RMS). Today NUI present their own problems when helicopters have to land on installations with only rudimentary firefighting equipment. This is set to change as the CAA (Civil Aviation Authority) now demands better safety for helicopter movements on NUI. CAP 437, Standard for Offshore Helicopter Landing Areas, states the following in chapter 5.3 appendix D that: “DIFFS on NUIs should be integrated with platform safety systems such that pop-up nozzles are activated automatically in the event of an impact of a helicopter on the helideck where a Post-Crash Fire (PCF) is a foreseeable outcome. The overall design of a DIFFS should incorporate a method of fire detection and be configured to avoid spurious activation. It should be capable of manual over-ride by the HLO and from the mother installation or from an onshore control room. Similar to a DIFFS provided for a Permanently Attended Installation (PAI) or vessel, a DIFFS provided on an NUI needs to consider the eventuality that one or more nozzles may be rendered ineffective by, for example, a crash. The basic performance assumptions stated in paragraphs 2.10 to 2.12 should also apply for a DIFFS located on an NUI.”
FIRE VALVES- Air & gas valves - Firefighting equipment System groups: 57 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se
5-126_PR_2016.indd 51 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
52
Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
FIRE-FIGHTING EQUIPMENT PROPORTIONERS- Firefighting equipment System groups: 505 MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Foam Proportioning Equipment Matre has since the late eighties delivered specially designed foam proportioner for use on industrial, marine and offshore installations. Product development and a strong focus on safety and accuracy has led to our range of products. These are often preferred in projects where flexibility and quality are crucial for the result. The reliability of the foam proportioning system is essential in order to guarantee an effective operation. Matre offers a wide range of proportioner models and sizes. We strive to be able to deliver and meet our customer’s challenges with proven equipment and solutions. Our desire as a complete supplier of foam proportioner is to be in front with new development and to ensure that we at all times can deliver reliable, cost effective solutions to the industry. We aim to keep our position as a leading supplier of high quality foam proportioning equipment. Data Sheets: Please follow the link: http://www.matre.no/products
5-126_PR_2016.indd 52 07.08.2016 11:45:33
53
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
FIRST AID EQUIPMENT- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.
FLEXIBARRIER- Cargo handling equipment MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no FlexiBarrier is a product developed to cope with the rough handling of goods and containers offshore. Adjacent railing and protection systems in lay-down areas can often be damaged, causing work delays and safety problems.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
54
Vestnes Ocean is the exclusive agent of STREAMO marine flooring range from Gerflor for the Norwegian maritime market. Gerflor creates, manufactures and markets innovative, design-led and eco-responsible solutions for flooring and complementary interior finishes. Gerflor is specifically developing new ranges for the maritime industry and has also certificates to deliver for both ships and offshore installations. Together with Vestnes Ocean`s Willy furniture, STREAMO floorings create a tasteful combination of colours and give an exclusive impression. Gerflor was actually the company that invented the homogeneous floorings in 1937. After this it has been a continuous development of new products and designs. STREAMO collection for maritime market also offers a complete solutions of handrails, pvc skirtings and pvc stair nosings. The floor convering offer consists of wooden imitation range called Streamo Karavel, and homogeneous PVC floorings called Streamo Cruiser, Seacrosser, Mariner and Steamer. For more information about the STREAMO products, visit www.streamobygerflor.com
FREE FALL LIFEBOATS- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com
Norsafe Free-fall lifeboats (GES - Gravity Escape System) have an optimal design and a large number of ships and offshore installations are equipped with our free-fall lifeboats. The benefits are clear: rapid evacuation in emergencies, the boat slides out from a ramp onboard the ship/installation, and hits the water well away from the ship or installation with a high vertical forward motion. Passengers are safe and secure in an enclosed cabin, securely fastened to anatomically shaped seats. The lifeboat system is robust and can withstand high winds, powerful waves and extreme weather conditions. The boats can be fitted with a water spray and compressed air system for protection against fire. Advantages with freefall-system: - Maximum distance from installation - Position to water entry point - Positive forward motion after water entry - Good guidance during initial phase of drop giving stability during free fall phase - Well-proven system designed for large heel/trim angles - Robust system against heavy wind and waves from any direction Our largest boats can withstand drops from great heights up to 47m and are highly space efficient. We supply davits specially designed for our free-fall lifeboats and can adapt davits to suit all onboard conditions. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC-labeled in accordance with the Marine Equipment Directive. Our lifeboat systems also meet the new DNV-OS-E406 standard for Norwegian waters as required from 2015. Typical specifications - are subject to revision according to customer requirements. All products are subject to continuous review. Norsafe AS reserves the right to change specifications without prior notice.
5-126_PR_2016.indd 54 07.08.2016 11:45:33
55
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
FREEZING SYSTEMS- AC units, air dryers, air cooling and heating components System groups: 57 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Freezing Systems Teknotherm has for years been a leading supplier of refrigeration systems to the world’s fishing fleet. Our wide range of products covers any kind of refrigeration installation onboard a fishing vessel, both for freezing or cooling the catch at sea.
FREQUENCY CONVERTERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 79, 85, 867, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems.
Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled.
FRESH WATER GENERATORS- Freshwater generation System groups: 761 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Fresh water generators.
FUEL CONSUMPTION MONITORING- Monitoring equipment System groups: 109 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PD Volummeters The accuracy of the KRAL Volumeter is unmatched. Our meters are accurate to within ±0,1 % of rate over a wide range of flow and viscosity. The reproducibility is better than ±0,01 %. With excellent service life and long-term stability, this clearly shows that sturdiness and precision are not mutually exclusive. Nine European standards laboratories used a KRAL Volumeter for a calibration
5-126_PR_2016.indd 55 07.08.2016 11:45:33
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
56
intercomparison. With results beyond expectations, the report suggests using our device as the default transfer standard between kerosene laboratories
FURNISHING- Furniture & cabinets System groups: 541 EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Modulbaserte “City” og “Ideal” er hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder, tekstiler og farger er meget stor, det samme gjelder ben og vanger. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø eller nyhetene “Stressless®City og “Metro” ? Utforsk hele kolleksjonen i vår nye digitalkatalog. I tillegg leverer vi Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva.
FURNITURES- Furniture & cabinets System groups: 541 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com WILLY FURNITURE LINE: Together with the designers Ralston & Bau, we developed the Willy furniture line as we felt there was no furniture on the market that is especially made for the purpose to be installed in a ship. This environment requires furniture that has several functions in addition to look good and be modern. Together with designer, seamen and outfitters we came up with Willy. It has its inspiration from the Orca, the killer whale. See more under Advantages to read about the clients benefits when choosing Willy on their ship. Do also have a look on the pages describing our concept for choosing the colors for the furniture and the rest of the interior on a ship. New maritime furniture collection called “Willy”, inspired by the round shapes of the killer whale. Some of the most important in the design work was to find solutions that are flexible and simple to adapt to customers needs and wishes. Willy Maritime Furniture Collection is module based, this means it’s easy to assemble and to fit to the environment onboard. This ensures lower man-hours in the outfitting. We also create colour collections to simplify the choice for the customer, but we are also flexible to fulfil the customer’s needs
5-126_PR_2016.indd 56 07.08.2016 11:45:33
57
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
GANGWAYS- Ladders, railings, stairs, ramps & gangways System groups: 564 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium was the first, and is by far the most experienced manufacturer of aluminium gangways in the world. Marine Aluminium’s telescopic gangways are a very important offshore safety feature, and although the main purpose is personnel access between offshore installations, it can also be used to support utility transfer lines for fuel, mud, electricity and water.
GAS CARGO PUMPS- Pumps & pump units System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com SMB Liquid Gas, submerged, in-tank Cargo Discharge Pum Shinko - Nishishiba SMB type submerged motor pumps have been developed as the send-out pumps in LNG, LPG & DME storage stations, and pressurizing and circulating pumps in LNG cryogenic power generation plants. The pump is used in submerged condition in the cryogenic liquefied gas in the barrel installed outside of the storage tank. It can be taken out
of the barrel easily by closing the valve provided between the barrel and tank, if the necessity occurs to check the pump for maintenance and inspection.
GATE VALVES- Air & gas valves - Fluid valves & other armatures System groups: 513 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve
5-126_PR_2016.indd 57 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
GEARBOXES- Gears FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Single Stage Gearbox The reduction gearboxes are designed for engines between 150 kW to 8000 kW. Maximum input speed is from 3200 rpm to 1000 rpm for the largest gearboxes. The reduction ratio is from 2:1 up to 10:1. The largest reduction is done by an additional gear train. The gearboxes can be delivered with PTO’s for hydraulic pumps or shaft generator. GXU Gearbox GXU gearboxes are designed for vessels where the size of the engine room is limited. The gearbox can be delivered with different center distances for best possible arrangement in the engine room. The gearbox is engineered with a solid design for high reliability in operation. PTO’s for hydraulic pumps or shaft generator can be delivered. Twin Input - Single Output Twin input - single output gearboxes is often used when variable power to the propeller is required. The gearbox can be operated with one or two engines at the same time. In vessel were extra reliability is required this is a good solution. The engines can either be placed in
front or behind the gearbox. PTO’s for hydraulic pumps or shaft generator can be delivered. The gearboxes are manufactured with following main components: . Cast steel gearbox housing . Input shaft arranged for flexible coupling . Hydraulic operated multi-plate clutch for secure and soft engagement . Gearwheels with hardened and ground helical teeth for silent operating . Hydraulic built in servo unit for secure propeller pitch setting . Output shaft with flange arrangement for propeller shaft coupling . All bearings of roller type with a low friction losses and long lifetime . Spherical roller thrust bearing with a low friction losses and long lifetime All parts are made of the most suitable material qualities.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
GEARS AND TRANSMISSIONS- Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 637, 638, 867, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide.
GENERATORS- Aggregates - Control & automation systems - Generators, alternators & dynamos System groups: 861, 87, 871, 872, 875, 89, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application.
GPS / GLONASS- Positioning & navigation equipment System groups: 412 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex - DARPS - Differential Absolute and Relative Positioning Sensor The DARPS product line combines high- performance sensors for reliable and accurate absolute and relative positioning of two vessels such as a shuttle tanker and a FPSO/FSU. The DARPS has proven itself over and over in harsh environments worldwide. - DPS - Differential Positioning Sensor Our Differential Position Sensors - DPS product line is developed for applications demanding reliable, accurate and quality-controlled position and velocity. The system has been well-proven and adapted by professional marine and offshore users worldwide. Typical applications include dynamic positioing systems, docking control and high-speed vessels.
HANGAR DOORS- Watertight/weathertight doors & windows TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Hangar Doors Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment
5-126_PR_2016.indd 59 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
60
configurations to help meet these needs. Offshore vessels often have an enclosed hangar for storage of equipment or for sheltering offshore operations. The rear deck is then accessed through a door in the aft end of the hangar. TTS Ships Equipment offers all kinds of door configurations: the most important design principles being compact construction, light weight and operation on a limited free space either on deck or in the hangar. A number of door types can be delivered either with outwards or inwards opening depending on the aft deck and hangar layouts.
HATCH COVERS- Hatches, covers, ports, ramps & platforms System groups: 30 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Offshore - Hatch Covers Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. TTS Ships Equipment AS can supply different type of hatch covers as Sliding type, Side hinged single flap, etc. Tailor made solutions are available upon request, depending on ship design and purpose.
HATCHES- Hatches, covers, ports, ramps & platforms System groups: 30 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Libra’s weathertight hatches type WTH are made of GRP sandwic. Low weight makes this hatch easy to operate and open, and is above all important through emergency hatches during escape. - High strength - Low weight - No corrosion = Low maintenance - Weight saving - app. 60% less than steel Steel, alu. or GRP hatches available Raised, flush or emergency type with spring hinges.
HEART STARTERS- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital.
5-126_PR_2016.indd 60 07.08.2016 11:45:34
61
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.
HEATING PLANTS- Heat exchangers & steam generation System groups: 577 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
HEATING SYSTEMS- Control & automation systems System groups: 41 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Heating Complete heating solutions from individual components to complete heat tracing systems for offshore and onshore applications.
5-126_PR_2016.indd 61 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
62
HELICOPTER DECK, EQUIPMENT- Helicopter deck equipment System groups: 566 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex - Helideck monitoring system - HMS 100 The helideck monitoring system is used to analyze helideck motion during helicopter landings to improve safety in hostile weather conditions. The HMS 100 monitors helideck attitude and vertical velocity, wind speed and direction, air temperature and barometric pressure and presents this information to indicate landing conditions. The HMS 100 is typically used offshore on floating production and storage vessels (FPSO) and seismic vessels.
HELICOPTER DECKS- Helicopter deck equipment System groups: 566 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Impressive weight reduction - no maintenance required - no painting - no repainting. Aluminium ensures a substantial weight reduction. The alloy used for Helidecks has the mechanical properties of mild steel and merely one-third of its weight. In addition, the extrusion technology provides the designers with possibilities that are impossible with steel. The Helidecks can be tailor made to fulfil the customer’s requirements and the delivery can
differ from a package for container transport to a completely installed “turn key” Helideck with lighting, fire-fighting etc.
HELIDECK LIGHTING- Lighting equipment & armatures System groups: 427 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Helideck Lighting Our unique Helideck Control System includes: Circle&H-, Flood-, Perimeter-, Status-, Obstruction lights, illuminated Windsocks and other monitoring functions related to Helideck operation.
HIGH TEMP/HIGH VISCOCITY SYSTEMS- Control & automation systems System groups: 3, 35 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Asphalt- / Bitumen- Liquid Pitch Pumps Twin-screw pumps Special design twin-screw pumps for handling of high temp./high viscocity liquids such as Molten Sulphur, Asphalt, Bitumen, Liquid Pitc Tar a.s.o.
5-126_PR_2016.indd 62 07.08.2016 11:45:34
63
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Heated, quensched and speed-controlled cargo pumps
HIGH VOLTAGE ELECTRODE BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no PARAT MEH High voltage electrode boilers The PARAT High Voltage electrode boiler can be delivered with a capacity up to 50 MW. With 40 years of experience in marine boilers we have developed a rugged design that fulfills all class requirements. The new electrode system for marine use, is a result of many years of experience combined with an innovative design. The high voltage electrode boiler is extremely compact. The cost savings on ships is significant, since no transformer or low voltage cables are needed, thus reducing both installation costs, space requirements and maintenance. The electrical control panel includes a complete safety and control system. This system is based on a Siemens SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system.
HOOK SYSTEMS- Safety equipment System groups: 503 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com As a response to industry concerns, Norsafe has undertaken an extensive process to improve release gear for lifeboats. This targets safety issues, especially the avoidance of a premature release. Our new TOR MKII Hook Release System has been developed and built according to the new regulations MSC.1/Circ.1392 and MSC.1/Circ.1393, IMO resolution MSC.320(89) and IMO resolution MSC.321(89). New hook systems installed after July 1, 2014 must comply with these new regulations, and all non-compliant hook systems must be replaced before July 1, 2019. Norsafe Service stations are currently carrying out re-hooking projects worldwide. Norsafe is proud to present the new TOR MKII Hook concept, a further development on the long proven TOR MKI Hook. The new hook is intrinsically safer and includes safety devices required by operators and regulators. It has already been well received by Norsafe’s key customers and is probably the safest hook on the market. The TOR MKII Hook has been designed specifically for simplicity of use and clearly understandable operation. The yellow padlock, clearly visible on both sides of the hook - indicates that the hook is set and release cables correctly located. The locking mechanism of the new TOR MKII Hook is such that securing pins through the hook (as a locking device or set indicator) and fall preventers are not necessary.
5-126_PR_2016.indd 63 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
64
HOOKS- Blocks & shackles System groups: 274, 344 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Harding offer a complete range of new high quality generation hooks that come directly from the frontline of product development, techniques and regulations. Harding’s SeaCure lifeboat release and retrieval systems (the new name for hooks) meet or exceed all IMO requirements and have an optional industry-recommended Secondary Safety System. The design is based on years of experience and feedback in service. It is safe to use and simple to operate and maintain. The SeaCure hook improves safety of crews and increases their confidence in their lifeboats.
HOT WATER BOILERS- Boilers, burners and incinerators System groups: 445, 577, 641, 841 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no MVH Vertikal Hot Water Boiler The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance.
The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.
HVAC- Accommodation work (including carpentry, HVAC) System groups: 51, 54, 541, 57, 583 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® ATEX Products for Cooling of Hazardous Areas AERON® Antenna Cooling Units The AERON® range of HVAC-R cooling products for hazardous areas is ATEX compliant, reliable and suitable for location within or in connection with hazardous areas. Our ATEX product ranges complies with the ATEX directive and consist of both standard
5-126_PR_2016.indd 64 07.08.2016 11:45:34
65
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
products and products tailor made to our customers’ requirements and operation environments. Our long experience in the marked and continuing developments of ATEX products, has led us to be one of the leading companies in cooling for hazardous areas in the marine and offshore business. MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium has delivered HVAC products/solutions for decades. Our product range includes shafts, water separating inlet louvers, louver housing, dampers and hatches. The best protection and longevity for customer’’s ventilation systems is achieved by high efficiency separating performance and the use of seawater resistant aluminium. The solutions offered can be designed to fit the customer’s requirements.
HYDRAULIC POWER PACKS- Hydraulic plants & equipment System groups: 3 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Hydraulic Power Packs HPU\’s in all executions, and variations for onshore-, offshore applications
HYDROGEN RECOVERY SYSTEMS- Boilers, burners and incinerators System groups: 64 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors.
INCINERATORS- Boilers, burners and incinerators - Maintenance, spare parts and supplies System groups: 445 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Incinerator E-mail: [email protected] Phone: +47 37 19 98 00 Spare Parts E-mail: [email protected] Phone: +47 37 19 98 00 Service E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Incinerators - safe and efficient waste management: TeamTec AS is a leading manufacturer of incinerators, with more than 11,000 units sold worldwide since 1972. The TeamTec Incinerators provide safe and efficient waste management, which complies with the IMO regulations for both waste oil and solid waste incineration. TeamTec supplies a wide range of incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts. TeamTec Bilge water injection solutions: TeamTec water injection system for the TeamTec Incinerators is an efficient and automated disposal system for contaminated water. The system reduces operating issues related to OWS, increase sludge burning
capacity and reduce NOX emissions. Older incinerator models can easily be upgraded with TeamTec’s certified water injection upgrading kit. TeamTec After Sales - worldwide service and spare parts: TeamTec provides comprehensive after sales service for all TeamTec products worldwide: spare parts, commissioning, repair service, pre-installation survey, service agreements, training and general technical support.
INERT GAS SYSTEMS- Firefighting equipment - Inert gas components, CO2 System groups: 376 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Since the first installation in 1984, our design has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s
5-126_PR_2016.indd 66 07.08.2016 11:45:34
67
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system.
INSTRUMENT CONSOLES- Centrals, consoles & panels LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no For bridge wings, winch control and other manoeuvring purposes Due to severe corrosion and paint problems with steel consoles, Libra has now developed GRP (Glassfibre Reinforced Polyester) consoles which completely solves these problems. They have the following features: - Fire retardant material - Corrosion- free - Solid GRP construction - Anti- magnetic - Low weight Standard colour RAL 9010 (other colours on request) Spraytight, hinged instrument cover Standard ext. colour, white RAL 9010 Steel fittings: Stainless steel AISI 316L
INSULATION- Insulation System groups: 51, 52 SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound
5-126_PR_2016.indd 67 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
68
INTEGRATED ELECTRIC PROPULSION SYSTEMS- Power generation, propulsion & manouvering System groups: 62, 651, 7 STADT AS 6083 Gjerdsvika Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no STADT STASCHO is a No Loss AC drive that supplies sinusoidal voltage and current to the electric motor and back to the main switchboard. This gives very low harmonic disturbances without using transformers or filters. STADT STASCHO is specially developed for marine propulsion systems, where it is used together with controllable pitch propellers.
INTERIOR FLOORS- Interior doors & windows System groups: 109, 51, 512, 513, 514, 515 SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking;
low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound
JIS VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve
5-126_PR_2016.indd 68 07.08.2016 11:45:34
69
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
JOYSTICK- Control & automation systems System groups: 403, 63, 791 LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no Norways larges manufacturer of Control Levers. Supplier to leading system manufacturers all over the world. -Control lever: Type LF50, Joystick -Control lever: Type LF60, Joystick - multi-axis joysticks.
KNIFE GATE VALVES- Air & gas valves - Fluid valves & other armatures System groups: 72 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logisticknowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
5-126_PR_2016.indd 69 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
70
KNUCKLE BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Foldable Knuckle Boom Crane Range from 2 mt to 330 mt - Sophisticated crane geometry for effortless work - Strenghts and flexibility for loading and unloading - Compact construction for numerious applications and use Knuckle Boom Crane range from 17 mt to 3000 mt Sophisticated crane geometry for effortless work Strength and flexibility for loading and unloading Compact construction
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
LIFE CYCLE MANAGEMENT- Aggregates - Alarm equipment - Centrals, consoles & panels - Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Engineering services - Gears - Generators, alternators & dynamos - Meters & indicators - Monitoring equipment - Project management, construction management - Propellers & impellers - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 109, 12, 381, 40, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide
LIFE JACKET CONTAINERS- Bins, baskets, boxes and containers - Lifesaving equipment System groups: 503 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no - Low weight - Minimal maintenance - Stainless steel hasps - Hot galvanized steel supports - Ventilated
LIFE JACKETS- Lifesaving equipment - Personal equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Life jackets SEALIFE LIFE JACKET SOLAS COLOUR: 290 ORANGE SEALIFE TP LIFE JACKET SOLAS COLOUR: 290 ORANGE SIZES: CHILD - ADULT SEALION Inflatable 150N OR 275N /SOLAS, HR SOLAS COLOUR: BLACK. SIZES: STD. PVC cover
5-126_PR_2016.indd 71 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
72
LIFEBOATS- Lifeboats/rafts & other boats System groups: 501, 503 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Free-fall Offshore: Harding offers freefall systems for use in offshore applications and merchant vessels. We apply our vast experience from the North Sea into the research and development of our products. Therefore, we are able to offer you the most sophisticated and safest freefall systems in the industry today. FF1200 (70p): The FF1200 is a 70 person freefall lifeboat specifically designed to meet the latest regulations on the Norwegian Continental Shelf in the North Sea, way beyond SOLAS rules for freefall lifeboats. Free-fall Shipping: The Harding LBF-serie of free-fall lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo. All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and the electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI 316, depending on how exposed the equipment is. Notifying body: Bureau Veritas (others on request) Totally enclosed lifeboats: Harding’s totally enclosed lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo.
All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI 316, depending on equipment exposure. Notifying body: Bureau Veritas (others on request) Harding lifeboats are certified with the latest LSA Code as amended With New hooks approved according resolution MSC.320 (89) and resolution MSC.321 (89) NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe conventional lifeboats are used all over the world, both on ships and offshore installations. The smallest boats in the lifeboat range are approved both as lifeboats and rescue boats. Our largest totally enclosed lifeboat (TELB) has a capacity for 136 people and is the largest on the market. The boats are double skinned, with foam buoyancy injected into the space between the inner and outer elements. The boats also have dedicated buoyancy tanks. This means that the boats are unsinkable, even if they become damaged or in a fully flooded condition. The craft has a positive stability up to 180º and is self-righting both when it is intact and in flooded conditions. The steering rudder nozzle has been specially designed to give maximum thrust from the propeller. The lifeboat system is robust and can easily withstand the powerful winds and high waves associated with extreme weather conditions.
5-126_PR_2016.indd 72 07.08.2016 11:45:34
73
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
The boats are equipped with on-load lifting hooks that are controlled from a release handle mounted at the steering position. Hooks will release simultaneously when the craft is fully waterborne. All Norsafe conventional lifeboats can be delivered with Norsafe’s new TOR MKII Hook Release System. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. The hull, superstructure, buoyant tanks, water and provision containers are all made of fire-retardant GRP. Our lifeboat systems also meet the new NORSOK R-002 standard required for Norwegian waters from 2015. The lifeboat’s hooks will release simultaneously when the craft is fully waterborne. Emergency release of the hooks is possible but the system is secured against accidental release. The fire protecting spray system pump takes seawater from the lowest possible location under the boat. The spray system provides water over the entire surface of the craft (1,200 l/min). The compressed air system has sufficient capacity to provide air for the maximum number of personnel and engine combustion for a minimum of 10 minutes. The over-pressure inside the boat prevents ingress of toxic fumes or gas. Provisions have been made to recharge the air system from the ship’s compressed air system.
LIFE-SAVING EQUIPMENT- Lifesaving equipment System groups: 50 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Marine rescue and safety epuipment. Lifesaving equipment for standby rescue vessels. Package deliveries.
LIGHT SOURCES- Lighting equipment & armatures System groups: 89 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Widest range of light sources available, and and unmatched knowledge of special bulbs and tubes. Large stock of lamps and fixtures for marine applications in stock.
5-126_PR_2016.indd 73 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
74
LIGHTING SYSTEMS- Lighting equipment & armatures System groups: 427, 89, 893 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Marine Lighting Designed in close cooperation with leading ship-owners and Naval architects and designers. Navigation-, Search-, Floodlights and Deck lights for the most demanding requirements
LOW NOISE TUNNEL THRUSTERS- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no LOWNOISE TUNNEL THRUSTERS NO 1 in LowNoise Thrusters Brunvoll pioneered the LowNoise concept in 1977. Since then, we have continuously refined our solutions into a proven concept. Today, Brunvoll is recognized world wide as the major supplier of effective LowNoise thruster solutions. Noise levels of 75-88 dB(A) are typical in cabins next to and above conventional tunnel thrusters. Brunvoll’s advanced technology can cut this by up to 15 dB(A). Combined with other measures,
noise reductions of up to 20-25 dB(A) have been verified.
MACHINERY DRIVES- Electrical motors & starters System groups: 12, 6, 65 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no The machinery drives are designed to be the fastest drives to install, parameter-set and commission. They are highly compact and cost effective. Equipped with cuttingedge intellegence and safety capability the drives are designed specufically to meet the production and performancenneeds og system integrators, original equipment manufactures (OEMs) and panel builders, as well as the requirements of end users in a broad range of applications. Applications: The machinery drives are designed to meet the requirements of an extensive range og machinery applications. The drives are ideal for food and beverages, material handling, lifting, textile, printing, rubber and plastics, and woodworking applications.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Through 60 years of delivering custom-made solutions for offshore and maritime applications, Matre has gained superior experience with machining special steel - resulting in a high number of commissions as subcontractor for machined components. At Matre’s production plant our experts are equipped with modern and advanced CNC machine tools, ensuring effective production and accuracy in every minute detail. As an integral part of our quality process, we also have well-equipped premises for assembly, control, testing and storage of machined components.
MAIN BOILERS- Boilers, burners and incinerators System groups: 61 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Parat steam boilers. Capacity 500 - 25.000 kg/h. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our clients and customers can rely on being handed
the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close.
MARINE AND OFFSHORE UPS- AC units, air dryers, air cooling and heating components System groups: 7 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no AC and DC UPS solutions to ensure clean and secure power onboard.
5-126_PR_2016.indd 75 07.08.2016 11:45:34
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
76
MASTS- Davits and masts System groups: 411, 412 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Masts Tactical masts for military use are one of the main product categories at Comrod France SA, the company’s French subsidiary. All masts are manufactured at the company’s production facility in France. Lerc SA supplies telescopic, sleeve, man-pack, manual and motorised masts. The company can also provide a complete antenna and mast system for rapid deployment. Key features of the mast products include easy maintenance, standard and tailormade versions, and advanced control systems for unmanned use of the masts. Sleeve masts constitute the main product category in this segment. Lerc has superior expertise and a well-proven track record for calculating, designing and manufacturing masts, especially for large and heavy top-load applications.
Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva
MEDICAL EQUIPMENT- Hospital & medical equipment System groups: 504 MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates.
5-126_PR_2016.indd 76 07.08.2016 11:45:35
77
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.
MEDICAL EQUIPMENT, EMERGENCY- Hospital & medical equipment System groups: 504 MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no A medical quality assurance tool coupled with telemedicine: ShipMed® Safety System ensures simple and safe operation of the ship’s hospital. The medical quality assurance tool lays the foundation for securing life and health on board and has been developed by medical personnel with long experience in ship medicine, in close cooperation with the maritime business, and according to Norwegian and International standards and regulations. ShipMed® Safety System assures the hospital stores and provides a full overview of the stock, expiry dates, distribution and purchase of medicines and medical equipment, as well as reports for stock, consumption and purchase. The software also provides a guide to use of medicines and medical equipment, a quick reference for medical equipment for different injuries and video clips showing various medical procedures. The quality assurance tool is available in
Norwegian, English and Portuguese, and covers lists of ships medicine for a wide variety of flag states. Telemedical solution: ShipMed® Safety System offers an option for telemedical solutions on board ships through ShipMed® Premium membership. The solution is coupled to the quality assurance tool, and increases the likelihood of reaching a diagnosis and administering treatment quickly. It allows for contact between vessels and doctor on shore with moving images and sound, as well as transfer of medical data such as ECG, pictures and text. In that way, illness, pains and visible injuries can be properly described and communicated, and correct treatment or evacuation can start quickly
MEDICINE CABINETS- Furniture & cabinets - Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design
5-126_PR_2016.indd 77 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
78
Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.
MEMBRANE SYSTEMS- Freshwater generation AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Air Products membrane systems meets your requirements for . Field-proven, robust membranes, which can withstand oil vapor as well as liquid water. . Exceptional total lifetime. . Guaranteed After Sales Services throughout lifetime.
MILITARY & PROFESSIONAL- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe has a wide range of boats for military and professional use, and attention is paid to guarantee the highest quality. Only the best craftsmanship, components and materials are used. The boats are specially designed to operate away from shore or the mother ship for extended periods of time. Combining superb seaworthiness, manoeuvrability and high speed, the boats are ideal for all types of assistance, patrols and other special applications. The layout and performance of the boats allow wide ranging functions, including operations in hostile areas. Undetectable and task flexible The boats have a low freeboard, a sprayhood specially designed for boarding, an anti-slip deck surface. They are self-bailing, have ample deck space, a self-righting system and a sturdy foam-fi lled fender. Radar waves pass through fi breglass, giving the boats an inherent stealth capability. This combined with very little use of aluminium or steel helps reduce the overall radar signature. For many users failure of the equipment is not - and cannot be - an option. The boats operating in the “no-failure-zone” can be equipped with a mechanical override control system for the engine electronics. Even if all on board engine electronics are heavily damaged or should fail completely, this system allows for the engines to be manually and mechanically run. Further,
5-126_PR_2016.indd 78 07.08.2016 11:45:35
79
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Norsafe can provide boats with full redundancy, where the motor, power train and all support functions are fully isolated within the craft. This ensures a safe return for the crew to land or to the mothership. Approved by authorities The boats are designed, built and equipped to comply with SOLAS regulations or similar national regulations. Other codes and certifi cation modules can be supplied. All boats are specially designed and constructed to meet the need for fully available, low maintenance, standby and operation. Following fabrication, all Norsafe boats are fully Factory Acceptance Tested (FAT) to ensure the boat performance and on board systems are fully functioning according to standard test procedures and the agreed specifi cation for the equipment. Customers are welcome to attend FAT and sea trials at Norsafe’s factory which has easy ocean access. Tailor made solutions One of the advantages for Norsafe customers is our design fl exibility, making it possible to build boats specifi cally intended to meet client requirements. Since our fi rst deliveries of professional boats all craft have been purpose equipped for specifi c tasks. Norsafe work closely with the customer to understand the requirements and produce concepts most suitable for the purpose the boats are intended for. Usually inboard diesel engines are fitted - these can be driven by waterjet, stern or surface drives. Petrol outboard motors can also be installed if preferred. Norsafe offer single, twin or triple engine installations. This wide range of propulsion options gives a wide spectrum of operation - from shallow river or coastal operations to high speed offshore use. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review.
Norsafe as reserves the right to change specification without prior notice.
MOB BOATS- Lifeboats/rafts & other boats System groups: 501 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Marketing of mob-boats in MP-design, Seabear, ALusafe and Weedo. Service, repairs and upgrade of all types. SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info MOB boats
MOON POOL HATCH COVERS- Hatches, covers, ports, ramps & platforms System groups: 30 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Offshore - Moon Pool Hatch Covers Offshore vessels are often built to comply
5-126_PR_2016.indd 79 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
80
with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. Moon pool hatch covers are based on standard hatch cover design principles with special attention to slamming forces and bottom sea pressure. Tailor made solutions are available upon request, depending on ship design and purpose. .Top sliding .Top 1 or 2 sections .Top folding .Bottom sliding .Bottom 1 or 2 sections .Bottom folding
MOORING EQUIPMENT- Capstans, bollards & hawse holes - Winches, drums & reels System groups: 43 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface.
8-STRAND KARAT® MAXI Plus has become standard terminology in high quality mooring applications. Very high strength/weight ratio allows substantial size reductions and ease in handling, as well as providing excellent overall economy. The new KARAT® MAXI PLUS ropes have the same properties but offer a higher MBL and much better abrasion resistance. The new KARAT® MAXI PLUS is DNV Type approved. 8-STRAND EuroRope Marine supplies a wide range of KARAT® MAXI PLUS mooring tails to suit different dimensions steel wire mooring ropes. We can offer both single leg TAILS and double leg endless RINGTAILS.
MOORING LINKS- Anchor, pipe & cable handling equipment System groups: 43 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Tønsberg Mooring Link - galvanised steel mooring link of compact design typically utilised as connection between wire rope and fibre tail. Available in three sizes 90 T, 120 T and 180 T. 300 T can be supplied on special request.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Moorings. - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface.
MUDBOXES- Bins, baskets, boxes and containers MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve
MULTIWHEELERS- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com TTS can offer a cost effective, high quality, series of multiwheelers/block transporters. The standard programme is from 75 to 520 ton pay load. The system allows movement in all directions. Two vehicles might be operated simultaneously by the same driver in tandem operation, either in hard connection (platform to platform) or soft connection (signal cable). Driver cabinet on each side makes the operation easier, as well as possibility for wireless remote control. Tailor made versions are also possible on request.
5-126_PR_2016.indd 81 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
82
NAVAL SYSTEMS- Control & automation systems System groups: 41 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Naval Sonar - Portable Integrated Navigation Systems - Underwater Noise Measurement - Waterside Security
NAVIGATION- Positioning & navigation equipment System groups: 17 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Aids to Navigation ( Aton ) NAVAIDS We specifically design to meet or exceed all known operational and safety requirements for aids to navigation on offshore installations. Tranberghas for 30 years been the exclusive distributor for Tideland products in Norway.
NAVIGATION / POSITIONING SYSTEMS- Positioning & navigation equipment KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex Seapath Our Seapath systems are designed to meet the position, attitude and heading requirements of hydro acoustic positioning and seabed mapping systems. The Seapath integrates GPS and inertial navigation technology to optimize accuracy in bathymetric surveys, seismic surveys and ADCP (Acoustic Doppler Current Profiler) systems. RADius RADius is a relative positioning system developed for operation in harsh and demanding environment utilising radar technology. As a stand-alone system, or interfaced with dynamic positioning or integrated bridge systems, RADius provides an extremely accurate and responsive ald to loading and unloading procedures for operations in all weather conditions. Docking and all loading procedures are also applications that can take advantage of the RADius system.
5-126_PR_2016.indd 82 07.08.2016 11:45:35
83
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
NEEDLE VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
NITROGEN GENERATOR SYSTEMS- Generators, alternators & dynamos System groups: 196, 376, 6 WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no Air-gas separation membranes are sensitive to contaminations from hydrocarbon aerosols/liquid (i.e. oil products) in the sense that such contamination cannot be removed nor can the membrane be regenerated, without running the risk of destroying the membrane. Most membrane based nitrogen generators have traditionally been equipped with oil lubricated feed air compressors, which increases the risk of oil contamination of the membranes. Traditionally, this problem has been dealt with by applying traditional filtration techniques upstream the membrane, and increasing the feed air temperature after filtration, in order to create a gap between the actual temperature and dew point temperature of oil & water vapor. Even though filtration equipment is installed, there will always be a risk of oil vapor carryover into the membrane. One of the situations that may contribute to this risk is that the traditional air-gas membrane normally has a recommended max. operating temperature of 50 °C. The compressor cooling water available may have a temperature of 36 °C, which, owing to the feed air temperature rise across the compressor, may result in a feed air temperature of as much as 46 °C, prior to the temperature increase required to avoid vapor condensation. This leaves us with a temperature gap of only 6 °C, which is not enough to avoid vapor condensation, because there is a temperature drop higher that this
5-126_PR_2016.indd 83 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
84
across the membrane, during the separation process. With the new ETech membranes, these problems are avoided, because, at first, the membrane material, polyamide, consists of a single composition, and not, as many other membranes, a dual composition, where the governing membrane is a thin layer applied on to a substructure. The two layers are normally of different materials. The polyamide may withstand a much higher temperature (typically as much as 130 °C), and may easily operate at a temperature of 60 °C, thus avoiding the risk of vapor condensation owing to lower operating temperatures. If however, there should be a vapor carryover, due to filtration failure or excess oil carryover from compressor, then the ETech membranes may be regenerated. ETech can therefore offer an exchange arrangement, provided that ETech membranes are already installed. It is quite apparent, the cost savings in such an arrangement, as opposed to purchasing brand new membranes. The Life Cycle Cost of Nitrogen generator can be reduced with as much as 60% compared to a normal membrane set up, and will also contribute to increased safety, in terms of regularity and system capacity.
Since the first installation in 1984, our design has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system.
NOZZLES- Air nozzles, jealousies and batteries - Fluid nozzles & mixing batteries System groups: 401, 404, 62, 721 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Nozzles for oil burners MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no
5-126_PR_2016.indd 84 07.08.2016 11:45:35
85
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
MATRE Nozzles Matre has developed different types of nozzles for firefighting. These are permanent installed high capacity deluge nozzles and pop-up nozzles for helideck or larger areas such as hangars or similar. Pop-up nozzle: The deck integrated pop-up nozzle can be delivered in two versions: offshore-/ ship version and yacht version. Standard material is SS316 for both nozzles and main parts in foam skid. Optional materials for nozzles are seawater resistant bronze and even titanium. The nozzles are installed flush with the deck top surface.When the system is released the nozzles will be lifted up by the water pressure and make an effective spray distribution of water/foam mixture to the entire landing area. According to the latest requirements given in CAP-437 these nozzles are further developed. The flow from a blocked nozzle will now remain the same as a fully popped-up nozzle. In this way the system still deliver full water capacity on deck if any nozzle are blocked. Flexi nozzles: MATRE Flexi Nozzle is a high capasity deluge nozzle. Both water capacity, spread angle and jet direction can be adjusted. MATRE Flexi Nozzles are in size 1” to 4” with flow range from approx. 200 l/min. to 4000 l/min. These nozzles have adjustable direction, spread angle and capacity. The large models of the nozzle operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution. Matre Flexi Nozzle can be used when a specific area has to be covered like:
- Car deck on a ferry - Tank top - Well head area The larger models of the nozzles operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution.
OBSTRUCTION LIGHTS- Lighting equipment & armatures System groups: 427 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Obstruction Lights High quality medium and low intensity LED obstruction lights in accordance with ICAO, FAA. Available for use in Zone 1, Zone 2 and Safe area.
OFFSHORE MODULES- Accommodation modules MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium can supply a wide range of custom built modules for various purposes such as: - Accommodation
5-126_PR_2016.indd 85 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
86
- Office space - Workshops - Containers - Storage Areas - Control Room Modules - Special purpose Modules - Heli-guard Areas - Helicopter Hangars Marine Aluminium can offer complete Living Quarter Extensions, also made with glass facades insulated to A60 fire class. These modules offer first class office or recreational areas on the offshore installations. The Modules can be supplied ready outfitted and insulated to any fire-rating. Low weight makes installation easier by reducing the amount of work required offshore. The modules can be fully outfitted and still be lifted using existing cranes on the installation.
OIL BURNERS- Boilers, burners and incinerators System groups: 577, 641, 644 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Oil burners Separate control panels and accessories for oil burners.
PAINTS- Coatings & paint System groups: 443 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.
5-126_PR_2016.indd 86 07.08.2016 11:45:35
87
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
PANELL PRODUCTION LINES- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Since our first Panel Production Line delivery in 1977, TTS has delivered more than 60 Panel Production Lines to shipyards worldwide. Our solutions have in many cases been developed in co-operation with demanding customers, enabling us to build up a unique know-how of the technological challenges facing the industry’s production area. Different solutions for different requirements In order to fulfil the complexity of requirements related to production volumes, material dimensions, workshop sizes and layouts, material flow, investment and payback considerations and capacity, we offer a range of Panel Production Line solutions that can be customised to any shipyard. Our Module Based Designs offer stepwise investment TTS offers modular solutions in order to accommodate yards with limited investment budgets or need for stepwise increase of panel production capacity. Thus, a Panel Production Line can be installed as a complete unit or as individual sections purchased over time.
In either case, the final result is the same - a significant improvement in productivity. Attractive return on investment Due to our ability to deliver a range of options - from relatively low-tech mechanical solutions to highly automated and heavy duty solutions - our customers, ranging from small, specialised yards to large high-volume yards, experience attractive return on investment through significant improvement in productivity, capacity and quality.
POWER SUPPLIES- Alarm equipment - Centrals, consoles & panels - Control & automation systems - Meters & indicators - Monitoring equipment - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 79, 791, 792, 793, 795, 85, 86 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.
POWERED WHEEL TRANSPORTER (PWT)- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The PWT-system is a module based transfer system, developed for fast and flexible moving of ships. A sophisticated control system enables movement in all directions, at the time being easy and user-friendly to operate. The system’s flexibility makes it possible to solve all common transfer operation and cope with different load, MDL, width, blocking length etc. Several safety features help the operator to perform the transfer according to modern safety standards. The PWT-system gives excellent access to the hull/trestle and has low requirement to ground conditions. The power unit(s) might be built-in in each module, every second/third module or as a separate unit. Available payload per unit is from 90 ton to 450ton.
PRECISION MECHANICS- Other construction assistance (cleaning, rigging, stores, support) LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no
5-126_PR_2016.indd 88 07.08.2016 11:45:35
89
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Lilaas AS manufacture precision mechanics, details, assembled units and system solutions. The company is well known as a creative partner for ideas and problem solutions on different fields. Our highly skilled workers manage 15 CNC-controlled machines. The limit of tolerance is 0,004 mm, using among other machines, Mazak Integrex 200 for optimum complete machining and Kitamura H300SL with 200 tools and 40 palettes. Our production is based on our own or customer documentation, and is highly effective, with general integration between machinery, CAD and CAM software.
PRIMERS- Coatings & paint System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Jotamastic 80 - Epoxy mastic primer Jotamastic 87 - Epoxy mastic primer Jotamastic 90 - Epoxy mastic primer Jotamastic Smart Pack - Primer for maintenance Jotacote Universal - hard-wearing epoxy primer Jotacote Universal N10 - hard-wearing epoxy primer
PROFILE AND BEAM CUTTING LINES- Plates and profiles System groups: 196 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com For processing profiles and beams, TTS offers fully automated cutting lines with integrated systems for handling and robotic cutting. A TTS profile and beam cutting line deliveres consistent high quality cuts on all kinds of profiles and beamsflatbars, bulb profiles, angles, T-beams and U-channels. TTS Interactive Macro Assignment for Cutting - CIMA, is a PC based software package used for offline programming of profile parts. The profile and beam cutting line is a module-based system that can be intergrated to form a complete system, suitable for larger shipyards and the heavy steel industries, as well as smaller steel production facilities. Features that may be included are: .Logistics system for transport, processing and buffering of all types of profiles .Integrated PC and PLC control system .3D sensing and compensation .Accurate length measuring system .Scrap and small piece handling .Text and ID marking of profiles .Reference line marking .Bending line marking .Automatic drying of profiles .Edge celaning of profiles .Profile grinding and sorting system Minimal installation and start up time is achieved through full scale testing of each cutting system before shipment to customer.
5-126_PR_2016.indd 89 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
90
PROPELLERS- Propellers & impellers System groups: 63 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no CP Propeller
The CP Propellers are manufactured from 1000 mm to 5000 mm in diameter. They are delivered with 3, 4 or 5 blades. The propeller hub and blades are manufactured in Ni.Al.-bronze. They can also be delivered in Stainless steel. The hydrodynamic blade design calculations are based on detailed analysis in computers together with Finnøy’s long experience. The propeller shaft is hollow bored and made of carbon steel or stainless steel. The pitch is adjusted by the push - pull rod. It transfers the axial force from the servo piston in the gearbox to the pitch setting mechanism in the propeller hub. The propeller hubs, type P26 to P48, are grease lubricated and from P39 to P125 are oil lubricated. The stern tube is delivered complete with bearings, sealing boxes and a gravity tank for stern tube oil. The stern tube can be delivered suitable for either oil or water lubrication. The sealing boxes are Finnøy’s own design, but other types can also be supplied. The propeller shaft flange is a split type for the smaller shafts and an oil shrink type for the larger shafts. Benefits of controllable pitch propellers compared to fixed pitch propellers: . Secure and precise manoeuvrability . An increase in the average speed . Stern tube wear is reduced . A constant speed at engine is possible . Easy replacement of spare blades . Engine wear is minimized . Reduced fuel costs . Dynamic position of vessel possible . Stepless speed control of the ship . Load control of engine is possible . Full power available under all conditions . The propeller can be designed for free running and towing Propeller Design All ships have individual needs. Speed is important for some ships. Towing pull is more important for others. To satisfy these needs Finnøy use the most suitable software
5-126_PR_2016.indd 90 07.08.2016 11:45:35
91
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
together with Finnøy’s knowledge when designing propeller blades. The propeller blade is designed for best possible performance regarding thrust, efficiency, noise and vibration. The blades are ground and balanced according to ISO 484 standards. Nozzle With ships that need maximum towing thrust a nozzle could be fitted. The nozzle increases the bollard pulls by approx 30%-40% over an open propeller absorbing the same power. It can be delivered as a steering or fixed nozzle.
PROPULSION- Other engine & propulsion equipment System groups: 40 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no BRUNVOLL PROPULSION SOLUTIONS Brunvoll is committed to developing new propulsion units with CPP technology. To complement our range with azimuth FPP Azimuth Thrusters, we are working together with Steerprop Ltd, in Finland. For conventional CPP propulsion, we have a collaboration with Finnøy Gear & Propeller to enable complete delivery of thruster units combined with main propulsion equipment including gears, shaft line, and propeller. This teamwork makes it possible for Brunvoll to offer coordinated systems for automation of propulsion and manoeuvring.
PROPULSION SYSTEMS- Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears - Propellers & impellers System groups: 40, 60, 601, 61, 62, 637, 638, 65, 793, 795 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
92
Monorail design with a capacity of up to SWL 20 t - Designed for the efficient handling of spares and provision in harbour - Two separate hooks supported by a trolley travelling on a monorail beam operating on both sides of the vessel - Available electric or hydraulic driven
PROVISION STORAGE- Galley, pantry equipment and whiteware System groups: 552 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Teknotherm refrigeration plants for provision rooms are available as standard split systems or as factory assembled units forming a total package with necessary operation and stand-by system. Systems can also be delivered as central cooling/freezing machinery for refrigerators and catering equipment.
PUMP UNITS- Pumps & pump units - Regulators & switches System groups: 309, 438, 439 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Transport pump units Pumps and equipment
PUMPS- Pumps & pump units System groups: 3, 353, 354, 438, 6, 7, 803 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no *Centrifugal pumps - Dickow Pumpen KG *Eccentric pumps -ASV Stuebbe GmbH & Co KG *Centrifugal pump of plastic materials - ASV Stuebbe GmbH & Co. KG *Booster pumps, water supply, industrial pumps Aturia Pumps, Italy *Air operated diaphragm pumps, air powered doble diaphragm pumps - Yamada Europe, Netherlands horizontal pumps - APEX pumps *Centrifugal magnetic coupled side channel pumps - Dickow pumpen KG, Germany *Screw pumps, eccentric screw pumps, mono pumps - Armatech FTS GmbH, Germany *Peristaltic pumps, hose pumps - Ragazzini, Italy *Centrifugal pumps bombas ercole marelli - Sundyne Marelli, Spain *Boiler feed pumps, cooling systems, booster pumps - Edur Pumpenfabrik GmbH, Germany *Diaphragm dosing pumps, piston pumps, plungerpumps, solenoid metering pumps, dosing plants - Seybert & Rahiner, Germany *OBL dosing pumps (API 675), Milan, Italy Alfsen og Gunderson AS is a leading supplier of fluid handling equipment for offshore use. We deliver centrifugal pumps and pumps systems, metering, dosing and injection pumps for chemicales. AG also designs and builds complete skid mounted units, consisting of pumps, regulation and monitoring systems acc. to API/NORSOK standards and regulations. We have inhouse engineering capacity, and
5-126_PR_2016.indd 92 07.08.2016 11:45:35
93
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
can do all kind of engineering, incl. drawing and detailed design, production, automation and commissioning works. FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MATRE Pumps Matre Pumps comprise a wide range of specially designed, effective and reliable liquid ring pumps and centrifugal pumps. Our pumps represent state of the art pumping technology, and are results from many years of research and development - often in close cooperation with our customers. Matre Pumps are utilized by some of the worlds most recognized manufacturers of diesel engines and lifeboats, e.g Rolls Royce Marine, Wärtsilä, Hedemora Diesel, CAT Diesel, Cummins Diesel and Schat-Harding. Our pumps are delivered in salt-water resistant bronze, with shafts of stainless steel. Matre Pumps feature a robust design and withstand polluted water containing particles such as sand and shell. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com .
PURIFICATION SYSTEMS- Purification plants & fluid treatment System groups: 355, 382, 444, 57, 867 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors.
RAIL TRANSFER SYSTEM- Ladders, railings, stairs, ramps & gangways System groups: 52 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The Ship Rail Transfer System is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects. The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 350 tons. .The transfer system operates on one level
5-126_PR_2016.indd 93 07.08.2016 11:45:35
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
94
.No pit required
.Flush rails will allow for cross traffic all over the yard
RAILING SYSTEMS- Ladders, railings, stairs, ramps & gangways System groups: 533 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no The field installed railing systems are highly versatile and can be adapted to any structure. The advantages of using field installed railing systems are the reduced weight, easy installation and ease of modification or configuration. The system can be installed offshore without any hot work.
REFERENCE SYSTEMS- Control & automation systems - Positioning & navigation equipment System groups: 43 KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex SpotTrack laser-based reference system SpotTrack is primarily used as a reference system for relative positioning in DP operations. The SpotTrack sensor is a robust motion stabilised rotating laser sensor which measures range and bearing to one or several retro-reflective targets installed on the target platform or vessel. Automatic wave motion stabilisation
provides optimum target lock. The onboard HMI unit allows for easy configuration and monitoring of the SpotTrack system.
REFRIGERATION PLANTS- AC units, air dryers, air cooling and heating components System groups: 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON´s range of refrigerating products will cover every need for refrigeration onboard modern ships and offshore installations. All refrigeration machineries and cooling products will be delivered according to requirements from yards, owners, classification society, and national authorities. Our refrigeration machineries are constructed for marine and offshore applications. Components and materials are chosen on the basis of our customers requirements and our long experience in the business. Emphasis is put on safety, energy efficiency, small dimensions, low weight and easy maintenance as well as site installation friendly solutions. The refrigeration plants can be delivered either as direct expansion systems or as chilled water plants for indirect cooling. Our plants can be delivered with aircooled or water cooled condensers, compressors for reciprocating or screw type systems, or as multi compressor units fitted with several compressors. Whatever the requirements, we will provide an optimal designed plant that meet your demands. Our refrigeration products may be delivered for ATEX or non ATEX areas. . Air cooled or water cooled Chilled water
5-126_PR_2016.indd 94 07.08.2016 11:45:35
95
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
refrigeration units - CW. . Air cooled or water cooled Refrigeration units with Direct expansion - DX. . Air cooled or water cooled Split AC units for ATEX or non ATEX. . Fan coils for Chilled water or ATEX air-cooled refrigeration units. . Complete Provision room refrigeration systems. . Self Contained Units for return air or fresh air supply. . Compact Deck units with Air Handling Units and refrigeration units built together. . Taylor made cooling systems in ATEX or non ATEX. . Antenna cooling units
REFRIGERATION SYSTEMS- AC units, air dryers, air cooling and heating components System groups: 362, 433, 554 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
REFRIGERATION, SPARE PART- AC units, air dryers, air cooling and heating components System groups: 362, 554 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Compressors, condensers, evaporators, valves, pulleys and motors. All manufacturers but mainly Danfoss, Bock, Carrier, Frigidaire, Lehmkuhl, Mycom, Tecumseh and York. Also supplier of refrigerant plants. Service
REM DRIVEN THRUSTERS (RDT)- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no RIM DRIVEN THRUSTERS (RDT) The Brunvoll RDT Concept with major potential in different areas. The Brunvoll Rim-Driven Thruster saves space and lower environmental impact with exceptionally low noise. The thruster, propeller and motor are in one compact unit There is no need for an external motor, shafts or couplings. Water-lubricated bearings eliminate
5-126_PR_2016.indd 95 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
96
the need for lube oil, and the risk of oil pollution. With no central shaft and no dynamic seals, there is less risk of damage due to line and rope entering the thruster. Permanent magnets provide greater flexibility in selection of motor speed (number of motor poles) and a motor with high efficiency running at a lower temperature. Planned development of the RDT concept - Retractable Azimuth - Flexibility - Efficient manoeuvring - Highly compact - small footprint - Minimal height - Minimal space needed - Can be placed in narrow skeg - Low noise and vibration
REMOTE CONTROL- Control & automation systems System groups: 381, 79 FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Remote Control Electronic remote control for control of gearboxes and cp-propeller systems. Remote control systems of all types can be supplied, as a single panel for control of pitch and rpm to larger combinator controls and single lever joy-stick systems. Standard: . Pitch indication on all panels . Control of clutch In/Out from all remote stations . Alarms for control voltage failure and pitch feedback failure . Emergency control from main panel on bridge . Control position changeover between main and slave controls,
with synchronisation of the control levers . Dimming of all lights and indicators on the bridge panels Optional: . Automatic overload control where rpm and fuel consumption are the main parameters . Propeller rpm indication
RESCUE BOAT DAVITS- Davits and masts System groups: 501 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Rescure Boat Datits TTS Marine AS is a supplier of single point davits for life saving equipment according to SOLAS (LSA). TTS has choosen DNV as a Notified Body and the standard davits are supplied with EC Type-Examination Certificate. TTS is specialized in creating solutions to meet your requirements and can also offer davit and boat as a complete package.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Harding offers a new range of rescue boat systems for offshore applications, merchant and passenger vessels. Our special designs ensure great stability and optimal working conditions on the vessel in rough sea conditions. We deliver rescue boats with petrol engine or diesel inboard engine. All boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). RRB: Harding’s rigid rescue boats have a special design that ensures great stability, as the outer and inner hulls are shaped in separate moulds. The buoyancy tank provides sufficient buoyancy to keep the boat afloat when flooded and fully manned. The boat can be delivered with or without an engine. We deliver rescue boats with petrol engine or diesel inboard engine. The boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). Harding fast rescue boats: Harding’s fast rescue boats can be supplied with both outboard petrol and inboard diesel engines. The boats have high-speed hulls, achieving speed up to 35 knots. Our fast rescue boats have hydraulic steering as standard. The robust GRP frame ensures good self-righting abilities, and large drain valves in the stern ensure drainage from the deck. The boats are equipped with high-quality navigation lights and switch panels (IP 56). Fast rescue boat in aluminum For rough usage under tough conditions Harding can also provide Fast rescue boats fitted with aluminum hull.The hull is designed for speed and stability, which means optimal
working conditions on the vessel in rough sea conditions. The boat achieves speed up to 35 knots. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Sale of boats in MP-design, Seabear, Alusafe and Weedo. Workshop for rescue- and work boats. NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Norsafe has the market’s widest range of rescue boats and daughter craft for ships, offshore installations, the coastguard service, police and other rescue services. Combining superb seaworthiness, maneuverability and speed, our boats are ideal for all types of rescue, patrols and other general applications. The boats are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit or outboard petrol engines. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. In accordance with current IMO regulations, all RO-RO Pax vessels must have fast rescue boats with a minimum length of 6 m and a top speed of at least 20 knots. We have boats which fully comply with these requirements and all equipment has been approved in accordance with latest SOLAS and subsequent
5-126_PR_2016.indd 97 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
98
amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice.
REVERSE OSMOSIS PLANTS- Purification plants & fluid treatment System groups: 584, 761 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon, salg og vedlikehold av avsaltningsanlegg ved hjelp av omvendt osmoseanlegg/RO membrananlegg. Verksteder og service world wide.
ROPES- Chains, wires & ropes System groups: 43, 437 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no 12- STRAND Twelve strand braided rope, made from DYNEEMAT HMPE grade SK 75, with a braided jacket of polyester. This gives a compact, round rope with a circular cross section and good spooling qualities.
DynamaxT Plus with Polyester jacket is manufactured for applications where heavy abrasion is expected. Polyester has low friction against steel. For special applications our Dynamax Plus can be manu-factured with other type of jackets (dyneema, composite, etc.)
RSW SYSTEMS- Cargo handling equipment System groups: 32 TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com RSW systems - Ideal for pelagic (purse seining and mid-water trawling) - Enables preservation of large catches, by cooling the catch rapidly to a temperature that allows storage on board over time, without significant reduction in quality - Has enabled large quality of mackerel, horse mackerel and herring to be used for human consumption - Improves quality on fishmeal by better rawmaterial - Reduced quotas set higher standards - better product means better price Teknotherm RSW plants mean rapid chill-down and storage of the catch in Refrigerated Sea Water. Storing the catch in RSW is an effective and cost-saving method of preserving the catch until landing ashore or further processing on board. The catch is brought down close to the freezing point of seawater in a minimum time by Teknotherm`s highly efficient RSW-chillers of flooded shell & tube type.
5-126_PR_2016.indd 98 07.08.2016 11:45:36
99
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
RUST PREVENTION AGENTS- Additives & agents - Anti-corrosion System groups: 27, 28 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.
SAFETY EQUIPMENT- Safety equipment System groups: 503 MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Marine rescue and safety equipment. Lifesaving equipment to standby rescue vessels. Package deliveries.
SAFETY SYSTEMS- Control & automation systems System groups: 375 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com
Product groups - Fleet Management Software - Navigator safety system - Safety system, K-Safe - Voyage data recorders - Waterside Security
SAFETY VALVES- Air & gas valves - Fluid valves & other armatures System groups: 73, 75 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve
5-126_PR_2016.indd 99 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
SCRUBBERS- Purification plants & fluid treatment System groups: 70 YARA MARINE AS 0277 Oslo Telephone: +47 47 88 85 44 e-mail: [email protected] Internet: www.greentechmarine.com Green Tech Marine® scrubber R15 By using Green Tech Marine® scrubbers, shipowners can continue to operate on heavy fuel oil instead of more costly marine gas oil while staying below the strict IMO requirements regarding sulphur emissions. Fuel prices of marine gas oil are expected to rise even higher in 2015 when the 0,1% sulphur limit enters into force. The Green Tech Marine® scrubbers make it simple to meet new environmental
regulations by replacing your ship’s exhaust silencer - no structural modifications required. You also benefit from: .Proven reduction of SOx and PM, compliant with MARPOL Annex VI -MEPC 58 and 59 .Hybrid scrubber - both open and closed loop operation .An extremely small footprint .Low weight resulting in minimal change to stability conditions .Energy-efficient To see some of the innovative features of the Green Tech Marine® Scrubber, point at the appropriate hot-spot with your mouse The scrubber is a hybrid scrubber and can both operate in open and closed loop. Closed loop to be used while in port and during maneuvering re-circulating the water already within the scrubber. When at sea switching to open loop again. There is no need for water treatment in open loop since the natural alkalinity of seawater neutralizes the acid. Wash water is continuously monitored at the inlet and the outlet to make sure it is in line with the criteria of MEPC 184 before it is discharged into the sea with no harm to the environment.
SEATS- Furniture & cabinets EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Modulbaserte City er ett av våre hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder,
5-126_PR_2016.indd 100 07.08.2016 11:45:36
101
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
tekstiler og farger er meget stor, det samme gjelder ben og vanger. Den er designlik med en av våre kjente Stressless® hvilestoler, Orion. Kombinasjonen er en kjent og kjær slager i mannskapsmiljøer verden over. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø? Utforsk hele kolleksjonen i vår nye digitalkatalog.
SEAWAGE TREATMENT PLANTS- Purification plants & fluid treatment System groups: 58 JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com EcomotiveTSewage Treatment Plant by JetsT A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience.
SELFCLOSING VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve
5-126_PR_2016.indd 101 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
102
- Diaphragm Valve - Storm Flap Valve
SENSORS- Sensors, gauges & detectors System groups: 60 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Helideck Monitoring System - HMS 100 - Marine level switches - Marine pressure transmitters - Marine temperature sensors - Motion and heading sensor products - Radar based tank gauges - Sensor simulator WM-25 - Signal converters and zener barriers - Water ingress detection system - Wireless temperature monitoring for compressors - SENTRY KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex The ultimate marine motion sensor The MRU is suitable for any maritime operation that requires attitude determination and motion compensation. Kongsberg’s range of motion sensors provides high accuracy motion measurements in all dynamic environments. They cover all marine activities, from small hydrographic vessels to large vessels and installations. Typical applications for MRUs . Motion compensation of single and multi-beam
echo sounders . Orientation and attitude measurements on AUVs and ROVs . High speed craft motion control and damping systems . Heave compensation of offshore cranes . Dynamic positioning . Hydro acoustic positioning . Ship motion monitoring . Ocean wave measurements . Antenna motion compensation and stabilization
SENSORS AND INSTRUMENTS- Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381, 40, 79, 792, 793, 795, 85, 87, 875 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators.
5-126_PR_2016.indd 102 07.08.2016 11:45:36
103
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
SEPARATORS & COWLS- Separators & trapsSystem groups: 73, 803 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks.
SERVICE PLATFORMS- Hatches, covers, ports, ramps & platforms System groups: 30 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Service platforms: TTS has designed a range of platforms for use in routine service work and
installation, significantly including tunnelling work for the mining industries. The platforms all feature double or triple-telescopic booms and are built with strong and rigid support. Over 2,700 TTS service platforms have been delivered to customers around the world, all supplied ready for connection to the customers’ hydraulic system.
SHACKLES- Blocks & shackles System groups: 344 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D - Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles
5-126_PR_2016.indd 103 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
104
SHIP HANDLING TROLLEY (SHT)- Repairs, modifications & docking System groups: 144, 17 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Ship Handling Trolley (SHT) is further cost efficient development of TTS’ well known rail trolley. Tyre wheels make the rails needless and enable the operator to move the ship “anywhere” in the yard. Like all other TTS transfer Systems fluid bed system gives full control of peak loads and load levelling properties. Each trolley has a payload of 150ton SWL and can be arranged differently depending on the load distribution and total load.
SHIP HORNS- Other nautical equipment System groups: 427 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com FROM CLASSIC “HONKS” TO COMPLETE ACOUSTIC SYSTEMS A Kockum Sonics whistle is not only high-quality design, it also contains the experience of more than 1 million TYFON® installations! Audibility is determed not simply by the strength of sound emenating from the whistle - much more is entailed to overcome absorption, distortion and local noise. This quality is the result of more than 80 years of development.
The TYFON® fulfi ls all current IMO and national authority regulations.
SHIP INTERIOR- Interior floor, wall & ceiling covers System groups: 511, 524 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.
SHIPLIFT- Lifts, hoist & escalators System groups: 321, 561 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com A shiplift enable your yard to launch end retrieve ships in a very time efficient and controlled manner. All winches are monitored by the control system and load cells to ensure load distribution within the design limits. By utilizing
various type of hoist capacities and vary the spacings, different demands are met with regards to MDL, total capacity, platform size, etc. If a TTS rail trolleys are used as launching system, the trolleys can be left on the platform when submerged.
SHIP’S HEALTH SERVICE- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board
5-126_PR_2016.indd 105 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
106
vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.
SHIP’S HOSPITALS- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no ShipMed Hospital Well thought-out and functional solutions Medi 3 ShipMed AS offers project planning and delivery of complete interior solutions, medicine and medical equipment to the ship’s medical facilities. Our hospital solution is adapted to each vessel based on type of vessel, number of crew, flag and certification requirements. The ShipMed Design Tool enables us to contribute with solutions already in the project planning phase and presents 3D drawings of the recommended interior solutions for the ship’s hospital. With ShipMed Hospital our customers can be sure that the ship’s medical facilities are equipped to the right extent.
SHIP’S MEDICINE- Hospital & medical equipment MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use.
5-126_PR_2016.indd 106 07.08.2016 11:45:36
107
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
SIDELOADING SYSTEMS- Cargo handling equipment - Cranes, crane equipment, lifting devices & booms System groups: 307 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Side loading system - Conveyor system The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side loading conveyor system. SWLs range from 6-20 tonnes. The system offers the possibility of installing an outer platform which can be used for larger tidal variations, and is also ideal for reefer ships. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity Side loading system - Side Mover The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side mover system. SWLs for one lift range from 2-8 tonnes. The system is ideal for smaller dry cargo ships and offers the possibility of tandem operation of the lifts for handling long cargo. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity. Side loading system - Side Swinger
The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side swinger system. SWLs for one lift range from 4-20 tonnes. Key benefits of a side loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity.
SILENCERS- Exhaust components & silencers System groups: 109 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no We deliver any type of square and circular high efficiency silencers.
SIMULATORS- Control & automation systems System groups: 109 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Dynamic positioning simulators - E-Learning system - Engine room simulator - GMDSS simulator - Liquid cargo handling simulator - Offshore Vessel Simulator - Ships bridge simulators - Thermal power plant simulator
5-126_PR_2016.indd 107 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
SPECIAL SUITS- Lifesaving equipment System groups: 503 HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no SeaRescue RESCUE MAN SUIT COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL NAVY QUICK DONNING / ANTI EXPOSURE SUIT COLOUR: 290 Orange SIZES: STANDARD 150 - 200cm SeaPilot PILOT SUIT COLOURS: 290 Orange / 300 Fluorescent Yellow SIZES: XS-XXL SOLAS
SPIRO PIPES- Pipes & pipe units System groups: 196 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Our AERON® spiro pipe systems comes in uninsulated and preinsulated types, that complies
with EUROVENT 2.2 Class C specifications for tightness and withstands negative and positive pressure up to 3000 Pa. The preinsulated spiro pipes is made of galvanized steel sheet and insulated with 16mm mineral wool that provides an excellent guarantee against heat loss during the winter, and against condensation in the period of cooling all through the summer. The fittings and pipes are ready for easy assembling as the fittings are supplied with a sealed rubber-ring to ensure tightness. The uninsulated and preinsulated spiropipes can also be delivered in stainless steel, suitable for outdoor installation in offshore environments.
STAIRWAYS- Ladders, railings, stairs, ramps & gangways System groups: 52 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium Stairways are an integrated part of the Marine Aluminium Railing System. The stairways can be delivered as completed assemblies, designed and built to meet each customer’s unique requirements or have the stairway system built on site if preferred. Marine Aluminium’s flexible system designs make either option possible.
STARTERS- Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62, 79, 85, 867, 898
5-126_PR_2016.indd 108 07.08.2016 11:45:36
109
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications.
STEAM TRAPS- Evaporators, condensers and receivers System groups: 64 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
5-126_PR_2016.indd 109 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
110
STIFF BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 32, 33 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Stiff Boom Crane Range from 22 mt to 3000 mt Exceptional power-to-weight ratio and mainability Slender design and additional winches Demountable crane booms simplify transportation
STOP VALVES- Air & gas valves - Fluid valves & other armatures MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve
STRAINERS- Fluid filters MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve
5-126_PR_2016.indd 110 07.08.2016 11:45:36
111
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
SUBSEA PUMPING SOLUTIONS- Subsea & seismic equipment System groups: 10 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PG-MAPS PG-MAPS Quad 1500 PG-MAPS Quad 1500 (Patent Pending) represent the most novel, low shear, high efficiency, positive displacement pumping solution currently presented to the market. Well Stimulation, Boosting, Scale Squeeze, Chemical Injection, Kill Mud, Drill Cuttings,
Water Injection and Sandaband a.s.o. are most relevant applications in the oil & gas sector
T AND H BEAM WELDING LINES- Welding & cutting equipment System groups: 191, 441 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com In co-operation with ESAB Welding Equipment AB, TTS offers a complete and efficient way of welding tailor-made beams and profiles. The lines are designed with economy and accuracy in mind, and can be delivered with additional equipment to suit special requirements for capacity and quality: .Welding of I-, T-, or L-beams, wide flange beams, columns, tapered beams or non-symmetrical beams with ESAB beam welder .Integrated handling equipment for mounting and handling of webs and flanges, as well as handling of ready welded profiles .Special sorting and handling cranes .Profile straightening .Inductive heat compensation .Surface treatment
5-126_PR_2016.indd 111 07.08.2016 11:45:36
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
112
TANK CLEANING MACHINES- Tank cleaning equipment System groups: 382 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com SC 15 TW Fixed SC 15 TW Portable tankcleaning systems specially developed for: Crude oill carriers Offshore Supply Vessels OBO carriers Product carriers Industrial applications Chemical carriers Bulk carriers Models SC 15 TW is media driven tankcleaning machines of twin nozzle type. SC 15 TW can be used either as portable machines on flexible hoses or as fixed submerged mounted machines. The machines can also be fixed installed on a extension pipe through the main deck.
TANK DRYING- Evaporators, condensers and receivers System groups: 37 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2
TANK GAUGING AND MEASUREMENTS- Cargo handling equipment System groups: 3 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Ballast and service tank gauging - Cargo monitoring and control system, K-Gauge - Crude oil interface Level Measurement system - Custody transfer system, K-Gauge CTS - Loading Computer system, C-Loading - Marine refit / Retrofit / Conversions - Radar based tank gauges - Tank overflow protection system
5-126_PR_2016.indd 112 07.08.2016 11:45:36
113
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
TANK HEATING SOLUTIONS- Tanks System groups: 641 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Tank Heating Solutions for Oil Spill Response Vessels Oil spill incidents are unplanned and unwanted events that can have dire consequences for the environment and fragile ecosystems around the globe. Fast response combined with the correct equipment able to cope with any type of hydrocarbon emulsion is vital to minimize the risk involved in extracting, processing and transporting petrochemicals outside our coastlines. Parat Halvorsen, in close cooperation with yards and ship owners, has developed a system that strengthens one vital part of the response value-chain in a very cost efficient way. A heating system that is fully integrated into the response vessels utility and heat recovery loop - and that in moments can be re-mobilized to deliver steam through specially engineered injection nozzles into the tanks that carry recovered hydrocarbons.
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
114
Telescopic Boom Crane range from 20 mt to 3000 m - Flexible for outreach and close range - Compact parking position and operator convenience - Shorter cable lenghts ensure safe load handling at close rang
THERMAL PROTECTION AID- Fire protection & detection equipment HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Ascotherm T.P.A. product line Ascotherm T.P.A. product line Ascotherm is currently one of the most successful designs of T.P.A. available today.
THRUSTER CONTROL, ALARM AND MONITORING SYSTEM- Control & automation systems System groups: 40 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no BRUCON The trusted Control, Alarm and Monitoring System from Brunvoll Control Brunvoll has built up decades of experience in reliable solutions for manoeuvring, positioning and propulsion control. Alarm Alerts and alarms give clear guidance for decision support. Early warnings enable quick intervention, reducing risks. Monitoring BruCon condition monitoring helps to optimize performance and makes it easier to plan smarter preventive maintenance. For Thrusters BruCon systems are specifically designed and produced for the entire range of Brunvoll thrusters. Main Propellers We provide complete control, monitoring and automation solutions for main propulsion equipment including azimuth systems from Brunvoll, and for main propulsion equipment from our strategic partners.
5-126_PR_2016.indd 114 07.08.2016 11:45:37
115
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
Drive Systems We supply BruCon for all our drive systems, including constant - / variable-speed CPP and FPP with frequency converters.
THRUSTERS- Thrusters and pods System groups: 404, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon
TOP FIRED WATER TUBE BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no PARAT MKS Marine Top Fired Water Tube Boiler The PARAT top fired water tube boiler is a fully automatic steam boiler.A sufficiently dimensioned steam drum makes the boiler suitable for evaporating steam from additional external exhaust gas boilers. The design and performance is a result of solid experience and high technical standards. The boiler is supplied with a circular furnace, constructed from membrane walls and convection sections with a combination of bare tubes and pin tubes. The heat flows cross sectional with a high flue gas velocity. With this unique design, both improved performance and reduced maintenance is achieved. The boiler fulfills the most stringent equipment standards and is available with certificates from all major class societies. Fittings and equipment are in accordance with class requirements. Our main equipment manufacturers supply high standard products. The steam atomizing burner can be supplied for oil, gas or dual fuel. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic and electric/pneumatic actuators. All operation from the boiler control panel is done from the local touch screen. Boiler PLC can be connected to the main control room with standard ethernet/profibus/modbus communication. Maintenance
5-126_PR_2016.indd 115 07.08.2016 11:45:37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
116
and inspections can be carried out through large inspection doors. An automatic steam cleaning system is installed between the tube sections. The boiler is preassembled and delivered as complete unit incl. insulation and fittings.
TOPCOATS- Coatings & paint System groups: 27 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Hardtop AS - Shiny polyuret Paint with good color Hardtop AX Hardtop XP - Topcoat, shiny polyuretan with good color Hardtop Flexi - Topcoat, semi-gloss Hardtop Optima - Two-component polysiloxsan Topcoat Hardtop CA - two-component Hardtop Smart Pack - Topcoat for maintenance Pilot II - 1-component alkyd-based topcoat Pilot ACR - 1-component, quick-drying akryl-based Marathon - epoxy primer Marathon IQ - epoxy primer
TRANSFORMERS- Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 865 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine www.siemens.no/marine Wide range and type of transformers and reactors. THD - Filters Special applications.
TRANSMITTERS- Sensors, gauges & detectors KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - Helideck Monitoring System - HMS 100 - Marine level switches - Marine pressure transmitters - Marine temperature sensors - Motion and heading sensor products - Radar based tank gauges - Sensor simulator WM-25 - Signal converters and zener barriers - Water ingress detection system - Wireless temperature monitoring for compressors - SENTRY
5-126_PR_2016.indd 116 07.08.2016 11:45:37
117
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
TRAVELLING CRANES- Cranes, crane equipment, lifting devices & booms System groups: 3, 32 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Travelling cranes with a capacity from 50 t up to SWL - 600 For operations such as BOP/Christmas tree, pipe handling, or other specific tasks offshore - Available with special features like PLC programming, radio remote controls, design cabins, ATEX and IECEx approval
TUNNEL THRUSTERS- Thrusters and pods System groups: 404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no TUNNEL THRUSTERS Small or large - a comprehensive range of Tunnel Thrusters. We focus on developing ever more reliable, optimized and cost-effective systems . Refined continuously through 4 thruster generations We have delivered thousands of tunnel thrusters for fishing, cruise, naval, merchant and offshore vessels - a success story for generations. Standard & Customized Brunvoll offers a scope of supply to suit your needs. Our portfolio of in-house expertise enables us to develop effective solutions for challenging projects. Our design engineers work together with the yard’s hull design team to achieve cost-effective thruster installations.
5-126_PR_2016.indd 117 07.08.2016 11:45:37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
118
UNDERWATER VEHICLES - AUV- Subsea & seismic equipment System groups: 414 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Product groups - HUGIN Autonomous underwater vehicles - REMUS Autonomous underwater vehicles - Underwater vehicle instruments - Launch and Recovery System - LARS for AUV and ROV - NavLab - Generic simulation and post-processing navigation software Commercial off the shelf We design and manufactures the REMUS and HUGIN product lines of commercial off the shelf (COTS) autonomous underwater vehicles (AUV). REMUS has been a tremendous success with more than 200 vehicles (2012) delivered. Remus vehicles are used in a wide number of applications including navies, hydrography and marine research. HUGIN AUVs boast operational experience from commercial and naval operations. Hugin operations have taken place in all parts of the world, in shallow to deep water, in arctic and tropical waters. REMUS and HUGIN vehicles have different capabilities and thus different applications and roles. They are available with short delivery times.
UV SYSTEM- Purification plants & fluid treatment System groups: 801 OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com The UV System was developed based on 20 years of experience in water injection on offshore platforms, water treatment for fish farming and drinking water plants in Norway.High power UV for the efficient killing or inactivation of organisms, bacteria and pathogens in ballast water. One UV lamp per chamber (167 m3/h flow rate per chamber). Standardized UV chamber, installed in parallel on a single manifold for higher flows. Developed and manufactured for installation aboard ships. Optimized for minimum maintenance and ease of operation. It is self-cleaning, with no moving parts or need for chemical cleaning. UV and temperature sensor in each chamber.
VACUUM PUMPS- Pumps & pump unitsSystem groups: 583 JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com VacuumaratorT pumps In-line installation of the VacuumaratorT pump combined with a small footprint and low weight allows for unique installation flexibility and considerable weight savings.
5-126_PR_2016.indd 118 07.08.2016 11:45:37
119
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
These advantages, along with low energy consumption, make JetsT the preferred choice for designers, yards and owners.
VACUUM TOILETS- Sanitary & waste equipment System groups: 583 JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com JetsT Vacuum Toilets A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience.
VACUUM VALVES- Air & gas valves MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a
new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
VALVES- Air & gas valves - Fluid valves & other armatures System groups: 3, 6, 7 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge.
5-126_PR_2016.indd 119 07.08.2016 11:45:37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
120
Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Spjeldventiler og kuleventiler for sjøvann, oljeprodukter, kjemikalier med LPG og LNG.
VERTICAL PIN-TUBE BOILERS- Boilers, burners and incinerators System groups: 64 PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no PARAT MPW Marine Vertical Pin-Tube Boiler The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.
5-126_PR_2016.indd 120 07.08.2016 11:45:37
121
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
VHF- Antennas & transmitters System groups: 411, 422, 424 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Comrod is a world leader in the design and manufacture of commercial marine antennas. All products are designed and manufactured to maintain exceptional performance while withstanding the rigours of the marine environment. Antennas are available covering the HF, maritime VHF, Cellular & Wireless LAN frequency bands. Multiband antennas are also available covering combinations of frequency bands.
WALL PANELS- Interior floor, wall & ceiling covers System groups: 511, 524 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Marine Aluminium has developed, manufactured and supplied the Safety Wall Systems since 1984 and these systems have been supplied to most of the Oil & Gas installations in the North Sea. These systems are designed to meet the requirements of explosion blast relief, natural ventilation, weather protection and heat shielding. The construction material is seawater resistant aluminium. .Explosion blast relief .Natural ventilation
.Weather protection
.Heat shield (Stainless steel)
WALLS- Interior floor, wall & ceiling covers System groups: 511 VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer. .
WATER TREATMENT- Purification plants & fluid treatment System groups: 584 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no
5-126_PR_2016.indd 121 07.08.2016 11:45:37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
122
Leading supplier of technology for all kinds of water treatment - with special expertise in straining, filtration, disinfection and pumping techniques. Also including agitators and static mixers. ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.
WEATHER LOUVERS- Watertight/weathertight doors & windows System groups: 304, 57 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Humidity does more damage than most people realise. Humidity leads to corrosion which will shorten the lifespan of machinery, metal structures, electrical installations and electronic systems.
Installation onboard offshore platforms and various types of ships are often exposed to extreme environmental conditions. Louvers in general, particular the intake louvers, are often exposed to larger amounts of water from heavy rain, strong winds, green sea and water spray. To ensure the longevity of the louvers, but also to increase the lifespan and performance of machinery, electronic systems and more, a well dimensioned and high quality intake louver systems is always well invested money. AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks.
WEB WELDING LINES- Welding & cutting equipment System groups: 191, 441 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com The TTS Web Welding Line is designed for welding smaller ship structure components such as webs and girders. Compared to manual pre-fabrication, an investment in a TTS welding line gives potential
5-126_PR_2016.indd 122 07.08.2016 11:45:37
123
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
improvements within the following areas: .Increased dimensional accuracy .Employ methods that reduces distortion .Dimensional accuracy allows the use of mechanized and robotized welding downstream .The components delivered from prefabrication to ship assembly are dimensional “accurate”. .Contributes to reduce assembly fit up time Improved working environment The line consists of a robot, which is mounted on a gantry together with the welding power source and the robot control system. The gantry travels on two rails placed on each side of the welding floor. All operations of the line are handled from the operator station placed on the shop floor, beside the rails.
WINCH BOLLARDS- Capstans, bollards & hawse holes System groups: 274, 33, 381, 432 TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Winch Bollard: TTS Marine AS has developed a Winch Bollard mooring system, which makes mooring operations easier and safer than the more conventional systems currently available. The patended TTS Winch Bollard can replace mooring winches, capstans, warping drums and the bollards normally used for mooring. Basic features for Winch Bollard: .One man operated .Direct mooring without use of stoppers .Optimal and safe control during mooring .Control stand with a foot pedal .Integrated emergency stop and a flexible cable connection
.Easy controllable fail safe brakes
.Stepless speed control with high light line speed .Automatically reduction of line speed when the load is increased .Low noise during operation .Self lubricated bearings for low maintenance .Compact, clean and water resistant design
WINCH LINES- Anchor, pipe & cable handling equipment - Winches, drums & reels System groups: 274, 43 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no 6-STRAND KARAT® WINCHline combines the unique characteristics of the high strength KARAT®-fibres with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT® WINCHline is designed to be used on self tensioning winches and is DNV Type Approved. 6-STRAND BUOYANT WINCHlineT is a unique fibre rope with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHlineT is designed to be permanently floating and to be used on selftensioning winches.
5-126_PR_2016.indd 123 07.08.2016 11:45:37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
WIND-SCREEN WIPERS- Bridge inventory & equipment System groups: 1 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Wind-Screen Wipers High quality custom-made wiper systems to meet any different installation requirement. The single blade mod. PG and twin blade mod. PGD straight line wipers, have been designed specifically for heavy duty applications either in naval or nautical sector. Straight line wiper are especially suited for very large windows aerea.
WIRE LUFFING LATTICE BOOM CRANES- Cranes, crane equipment, lifting devices & booms System groups: 274, 3, 33 PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Slewing pedestal design with a load moment of up to 3000 mt - Fully electric crane available according to EN13852-1/NORSOK R-002 - Supplied with built in electro-hydraulic or diese-built in power pack - Meeting latest offshore rules and regulations and can be supplied with a variety of features in accordance with specific customer requirements
WIRE ROPE LUBRICATORS, HIGH PRESSURE- Lubricants System groups: 3, 4 MASTO WIRE SERVICE A/S 4688 Kristiansand S Telephone: +47 38 09 70 50 Telefax: +47 38 09 70 53 e-mail: [email protected] Internet: www.masto.no Distribution for the world-wide shipping marked: Wilhelmsen Ships Service (Unitor) together with Masto Wire Service A.S.
5-126_PR_2016.indd 124 07.08.2016 11:45:37
125
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
WIRE ROPE LUBRICATORS (high-pressure). For the shipping, offshore and industrial market. Produced in Norway. World-wide export
WORKBOATS- Lifeboats/rafts & other boats System groups: 501 NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Munin 980 Workboats are now ready for delivery on 6 months notice. The boat has been developed in close cooperation with the major actor in seismic operations at sea. The product has more than fulfilled all the previous expectations for total performance in operation. This workboat is designed according to the DNV 2.21 Craft (April 2010) It is equipped with standard minimum equipment according to DNV Craft 2.21regulations. All equipment and outfitting are high quality components. The workboat is designed and outfitted for fulfilling the demands for reliability, low maintenance cost and long-time heavy use. The workboat has excellent reliability, manoeuvrability and sea keeping abilities in heavy sea in order to fulfil its prime function - to perform as an effective work platform. The boat is further designed to operate away from the mother ship for extended period, with sufficient range and long-time operation, with a high gunwale around the boat providing a protected and comfortable working environment for crew and passengers. The layout and performance of the boat allow it to perform roles as multi-purpose workboat, seismic workboat, towing boom, dive support, inspection- survey- and towingduties.
5-126_PR_2016.indd 125 07.08.2016 11:45:37
PRODUCT NAMESwith Cross-references to CBS page 131 and SFI page 305
126
5-126_PR_2016.indd 126 07.08.2016 11:45:37
127
INDEX TO PRODUCT CATEGORIES Alphabetical
The present change in structure, as will be seen in this book, implies that products now are classified in a new component structure:
ACCOMMODATION MODULESRelevant system groups:51, 512, 513, 514, 55, 583, 595 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no OFFSHORE MODULES Marine Aluminium can supply a wide range of custom built modules for various purposes such as: - Accommodation - Office space - Workshops - Containers - Storage Areas - Control Room Modules - Special purpose Modules - Heli-guard Areas - Helicopter Hangars Marine Aluminium can offer complete Living Quarter Extensions, also made with glass facades insulated to A60 fire class. These modules offer first class office or recreational areas on the offshore installations. The Modules can be supplied ready outfitted and insulated to any fire-rating. Low weight makes installation easier by reducing the amount of work required offshore. The modules can be fully outfitted and still be lifted using existing cranes on the installation. NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 ACCOMMODATION SYSTEMS WET UNITS
BRIDGE INVENTORY & EQUIPMENTRelevant system groups:1, 4, 417, 419, 43, 515, 541, 542, 548, 6, 7, 87, 951 ALU DESIGN & SERVICES AS 4636 Kristiansand Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Company brochures and datasheets are available on the Internet. CHAIRS, PILOT CHAIRS Think future Comfort No one else combines usability, functionality and innovation with this level of comfort. Our ergonomic expertise allows us to create chairs that become a seamless extension of the user - encapsulating them in an environment tailor made to maximize performance and minimize fatigue. Total control through absolute comfort. DECK RAILS Certified excellence Alu Design invests in a comprehensive programme of testing and certification. It is our aim to demonstrate that every one of our products is built with care, precision and quality, complying with the market’s most exacting standards. When you sit in an Alu Design chair you can relax, safe in the knowledge that there is simply no better seat.
133_304_CBS_2016.indd 136 07.08.2016 11:46:28
137
ACCOMMODATION EQUIPMENT
L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 BRIDGE CONTROL SYSTEMS NORSAP AS 4628 Kristiansand Telephone: +47-38 18 52 00 PILOT CHAIRS TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. WIND-SCREEN WIPERS Wind-Screen Wipers High quality custom-made wiper systems to meet any different installation requirement. The single blade mod. PG and twin blade mod. PGD straight line wipers, have been designed specifically for heavy duty applications either in naval or nautical sector. Straight line wiper are especially suited for very large windows aerea.
CLEANING EQUIPMENTRelevant system groups:123, 17, 196, 203, 401, 404, 442, 444, 551, 558, 582, 59, 62, 7 BEHA-HEDO INDUSTRIER AS 3702 Skien Telephone: +47 35 93 20 00 Telefax: +47 35 93 20 01 WASHING MACHINES CLEAN MARINE AS 1366 Lysaker Telephone: +47 21 04 33 11 EMISSION CLEANING SYSTEMS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com BALLAST WATER TREATMENT SYSTEMS Ballast Water Treatment System The Hyde Guardian BWTS offers an effective and reliable solution based on solids separation and UV irradiation. The Hyde Guardian system utilizes existing ballast pumps and piping. Standard systems are available for flow rates from 60m3/h up to 1500m3/h and customized systems up to 6000m3/h
133_304_CBS_2016.indd 137 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
138
ENTERTAINMENT EQUIPMENTRelevant system groups:425, 446, 546 BAZE TECHNOLOGY AS NO-3905 Porsgrunn Telephone: +47 94 80 06 00 Telefax: +47 35 10 54 99 ENTERTAINMENT EQUIPMENT
FURNITURE & CABINETSRelevant system groups:10, 321, 446, 5, 51, 541, 542, 543, 548, 552, 553, 556, 558, 813 ALU DESIGN & SERVICES AS 4636 Kristiansand Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Company brochures and datasheets are available on the Internet. CHAIRS, PILOT CHAIRS Think future Comfort No one else combines usability, functionality and innovation with this level of comfort. Our ergonomic expertise allows us to create chairs that become a seamless extension of the user - encapsulating them in an environment tailor made to maximize performance and minimize fatigue. Total control through absolute comfort.
DECK RAILS Certified excellence Alu Design invests in a comprehensive programme of testing and certification. It is our aim to demonstrate that every one of our products is built with care, precision and quality, complying with the market’s most exacting standards. When you sit in an Alu Design chair you can relax, safe in the knowledge that there is simply no better seat. DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 STAINLES STEEL FURNISHMENTS EKORNES CONTRACT AS 6239 Sykkylven Telephone: +47 70 25 52 00 Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Company brochures and datasheets are available on the Internet. FURNISHING Modulbaserte ”City” og ”Ideal” er hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder, tekstiler og farger er meget stor, det samme gjelder ben og vanger. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø eller nyhetene ”Stressless®City og ”Metro” ? Utforsk hele kolleksjonen i vår nye digitalkatalog.
133_304_CBS_2016.indd 138 07.08.2016 11:46:28
139
ACCOMMODATION EQUIPMENT
I tillegg leverer vi Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva. MATTRESS Svane® fjærmadrasser for bruk om bord i skip. Madrassen er blant de områdene der mannskap ønsker stadig mer kvalitet og velvære, derfor er mange moderne lugarer i dag utstyrt med vår storselger Svane Eva SEATS Modulbaserte City er ett av våre hovedprodukter innen skipsinnredning. Det modulbaserte systemet er sterkt og varig, samtidig som det gir den samme sittekomforten som resten av vår berømte kolleksjon. Valgfriheten innen huder, tekstiler og farger er meget stor, det samme gjelder ben og vanger. Den er designlik med en av våre kjente Stressless® hvilestoler, Orion. Kombinasjonen er en kjent og kjær slager i mannskapsmiljøer verden over. Vi tilbyr hele basiskolleksjonen av Ekornes® og Stressless® møbler for montering på skip, fra det mest funksjonelle til det luksuriøse og stilfulle. Hvorfor ikke prøve vår prisvinnende designstol, Stressless Jazz, i ditt skipsmiljø? Utforsk hele kolleksjonen i vår nye digitalkatalog. LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet.
EQUIPMENT CABINETS The Libra equipment cabinet is available in many standard sizes and we also supply sizes in accordance with the customer’s requirements. Shelf arrangement (vertical or horizontal), heating, lighting, etc., are supplied in accordance with requirements and adjusted in each individual case. Main features: - Material: Fire retardant GRP - Low weight - Minimal maintenance - Central Closing Device - Corrosion- free - Layout/arrangement in accordance with requirements - Standard sizes + customized sizes on request - Double doors or roller front arrangement. - Standard colours: white, red or green - Side-by-side door arrangement or alternatively roller shutter MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Company brochures and datasheets are available on the Internet. MEDICINE CABINETS Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular
133_304_CBS_2016.indd 139 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
140
vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use. MODELL MØBLER AS 4635 Kristiansand Telephone: +47 38 12 79 90 Telefax: +47 38 12 79 99 FURNITURES SEATS NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 FURNITURES VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet.
CABINETS LONG LIFE SPAN: Vestnes Produkt AS workshop cabinets are specially adapted to be used on-board ships and offshore. We have developed the cabinets in cooperation with users from ships and offshore installations. This has resulted in a high-quality product with exceptionally good utility value. The use of thick electrolytically galvanized panels means the cabinets have a very long life span. The cabinets can also be produces in acid-proof stainless steel. PRACTICAL SOLUTIONS Our cabinets are made from 1.25 mm thick panels, giving a high-quality finish. The sides, back, shelves and door frames are screwed together to ensure good stability and prevent rattling. The doors on our biggest cabinets have threepoint fastenings. The doors are assembled in an all-welded frame to prevent dust from getting in. The cabinets can be delivered without doors and with open shelves, which have a front lip to prevent objects falling out. The drawer shelves have a spot-welded lining and come withdrawer stops. All our models are made of electrolytically galvanized panels, have strengthened bases and are powder coated in colour RAL 9002 (light grey) FITTING The cabinets can be delivered pre-assembled by the manufacturer or in kit-form for the customer to assemble on board. A fitter form Vestnes is also available if required. All our cabinets come with assembly instructions. There are 12 standard layouts, but the cabinets can be installed as you wish. If you require internal fittings made to measure, we are happy to help. FURNITURES WILLY FURNITURE LINE: Together with the designers Ralston & Bau, we developed the Willy furniture line as we felt there was no furniture on the market that is especially made for the purpose to be installed in a ship. This environment requires furniture
133_304_CBS_2016.indd 140 07.08.2016 11:46:28
141
ACCOMMODATION EQUIPMENT
that has several functions in addition to look good and be modern. Together with designer, seamen and outfitters we came up with Willy. It has its inspiration from the Orca, the killer whale. See more under Advantages to read about the clients benefits when choosing Willy on their ship. Do also have a look on the pages describing our concept for choosing the colors for the furniture and the rest of the interior on a ship. New maritime furniture collection called “Willy”, inspired by the round shapes of the killer whale. Some of the most important in the design work was to find solutions that are flexible and simple to adapt to customers needs and wishes. Willy Maritime Furniture Collection is module based, this means it’s easy to assemble and to fit to the environment onboard. This ensures lower man-hours in the outfitting. We also create colour collections to simplify the choice for the customer, but we are also flexible to fulfil the customer’s needs
TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. PROVISION STORAGE Teknotherm refrigeration plants for provision rooms are available as standard split systems or as factory assembled units forming a total package with necessary operation and stand-by system. Systems can also be delivered as central cooling/freezing machinery for refrigerators and catering equipment.
HOSPITAL & MEDICAL EQUIPMENTRelevant system groups:503, 504 MEDI 3 MARINE AS 6025 Ålesund Telephone: +47-70 11 70 00 Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Company brochures and datasheets are available on the Internet. EMERGENCY MEDICINE CARE MEDICAL EQUIPMENT, EMERGENCY A medical quality assurance tool coupled with telemedicine: ShipMed® Safety System ensures simple and safe operation of the ship’s hospital. The medical quality assurance tool lays the foundation for securing life and health on board
133_304_CBS_2016.indd 141 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
142
and has been developed by medical personnel with long experience in ship medicine, in close cooperation with the maritime business, and according to Norwegian and International standards and regulations. ShipMed® Safety System assures the hospital stores and provides a full overview of the stock, expiry dates, distribution and purchase of medicines and medical equipment, as well as reports for stock, consumption and purchase. The software also provides a guide to use of medicines and medical equipment, a quick reference for medical equipment for different injuries and video clips showing various medical procedures. The quality assurance tool is available in Norwegian, English and Portuguese, and covers lists of ships medicine for a wide variety of flag states. Telemedical solution: ShipMed® Safety System offers an option for telemedical solutions on board ships through ShipMed® Premium membership. The solution is coupled to the quality assurance tool, and increases the likelihood of reaching a diagnosis and administering treatment quickly. It allows for contact between vessels and doctor on shore with moving images and sound, as well as transfer of medical data such as ECG, pictures and text. In that way, illness, pains and visible injuries can be properly described and communicated, and correct treatment or evacuation can start quickly FIRST AID EQUIPMENT HEART STARTERS MEDICAL EQUIPMENT MEDICINE CABINETS SHIP’S HEALTH SERVICE SHIP’S MEDICINE Innovative and functional solutions: Medi 3 ShipMed is a full-range supplier to the ship’s hospital, and can provide interior solutions, medicine and medical equipment to meet hospital requirements. To further
increase the safety for those onboard, we have developed the ShipMed Safety System which provides medical quality assurance of the operation of the ship’s hospital. A well functioning ship hospital has to both meet the hospital requirements of the particular vessel as well as existing regulations and conventions. Medi 3 ShipMed AS has developed the AutoCAD tool ShipMed® Design Tool to ensure that this is safeguarded already in the project planning phase. When using the ShipMed® Design Tool designers are guaranteed that all requirements are fulfilled and the tool provides opportunity to use hospital samples and adjust them to the particular vessel. Medi 3 ShipMed is also authorized by the Norwegian Directorate of Health to perform inspections of the medical equipment on board vessels and can issue medical certificates. Our consultants will ensure that the hospital is equipped to the right extent, medicines are labeled and located in accordance with regulations, and that equipment is tested and ready for use. SHIP’S HOSPITALS ShipMed Hospital Well thought-out and functional solutions Medi 3 ShipMed AS offers project planning and delivery of complete interior solutions, medicine and medical equipment to the ship’s medical facilities. Our hospital solution is adapted to each vessel based on type of vessel, number of crew, flag and certification requirements. The ShipMed Design Tool enables us to contribute with solutions already in the project planning phase and presents 3D drawings of the recommended interior solutions for the ship’s hospital. With ShipMed Hospital our customers can be sure that the ship’s medical facilities are equipped to the right extent.
133_304_CBS_2016.indd 142 07.08.2016 11:46:28
143
ACCOMMODATION EQUIPMENT
INTERIOR DOORS & WINDOWSRelevant system groups:109, 51, 512, 513, 514, 515, 951 ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 DOORFRAMES WINDOW FRAMES LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. DOORS Watertight doors. Weathertight doors. Watertight and weathertight in A0 and A60. Spraytight bulkhead doors, insulated. Hatches, flush/raised NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 DOORS SHIPS’ WINDOWS
SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com INTERIOR FLOORS Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. DOORS TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden
133_304_CBS_2016.indd 143 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
144
imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.
INTERIOR FLOOR, WALL & CEILING COVERSRelevant system groups:511, 524 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no WALL PANELS Marine Aluminium has developed, manufactured and supplied the Safety Wall Systems since 1984 and these systems have been supplied to most of the Oil & Gas installations in the North Sea. These systems are designed to meet the requirements of explosion blast relief, natural ventilation, weather protection and heat shielding. The construction material is seawater resistant aluminium. .Explosion blast relief .Natural ventilation .Weather protection .Heat shield (Stainless steel)
NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 CEILINGS WALLS OPTIMERA AS - MARINE DIV. 6155 Ørsta Telephone: +47 47 64 80 00 WALL PANELS SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Company brochures and datasheets are available on the Internet. DECK SELFSMOOTHING SCREED Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound
133_304_CBS_2016.indd 144 07.08.2016 11:46:28
145
ACCOMMODATION EQUIPMENT
VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. CEILINGS SHIP INTERIOR TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer. FLOOR COVERING Vestnes Ocean is the exclusive agent of STREAMO marine flooring range from Gerflor for the Norwegian maritime market. Gerflor creates, manufactures and markets innovative, design-led and eco-responsible solutions for flooring and complementary interior finishes. Gerflor is specifically developing new ranges for the maritime industry and has also certificates to deliver for both ships and offshore installations. Together with Vestnes Ocean`s Willy furniture, STREAMO floorings create a tasteful combination of colours and give an exclusive impression. Gerflor was actually the company that invented the homogeneous floorings
in 1937. After this it has been a continuous development of new products and designs. STREAMO collection for maritime market also offers a complete solutions of handrails, pvc skirtings and pvc stair nosings. The floor convering offer consists of wooden imitation range called Streamo Karavel, and homogeneous PVC floorings called Streamo Cruiser, Seacrosser, Mariner and Steamer. For more information about the STREAMO products, visit www.streamobygerflor.com WALLS TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer. .
133_304_CBS_2016.indd 145 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
146
LIFTS, HOIST & ESCALATORSRelevant system groups:321, 34, 452, 56, 561 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. SHIPLIFT A shiplift enable your yard to launch end retrieve ships in a very time efficient and controlled manner. All winches are monitored by the control system and load cells to ensure load distribution within the design limits. By utilizing various type of hoist capacities and vary the spacings, different demands are met with regards to MDL, total capacity, platform size, etc. If a TTS rail trolleys are used as launching system, the trolleys can be left on the platform when submerged.
OTHER INVENTORYRelevant system groups:196, 446, 448, 54, 541, 543, 548, 7, 892
PERSONAL EQUIPMENTRelevant system groups:196, 403, 442, 50, 503, 505 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 SCREWS HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. LIFE JACKETS Life jackets SEALIFE LIFE JACKET SOLAS COLOUR: 290 ORANGE SEALIFE TP LIFE JACKET SOLAS COLOUR: 290 ORANGE SIZES: CHILD - ADULT SEALION Inflatable 150N OR 275N /SOLAS, HR SOLAS COLOUR: BLACK. SIZES: STD. PVC cover WORK/SURVIVAL SUITS E-300-2 WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XL SOLAS SEAMOB Crew WORK / SURVIVAL SUIT COLOUR: 290 Orange SIZES: XS-XXL SOLAS
VACUUM TOILETS JetsT Vacuum Toilets A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience.
133_304_CBS_2016.indd 147 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
148
133_304_CBS_2016.indd 148 07.08.2016 11:46:28
149
ACCOMMODATION EQUIPMENT
AIR, GAS & PNEUMATIC EQUIPMENT
AC units, air dryers, air cooling and heating components 150Air & gas valves 152Air and gas treatment (dehydrators, air separators) 153Air filters & spark arresters 154Air nozzles, jealousies and batteries 154Compressors 154Fans 155Hoses, drums, packings & fittings 156Inert gas components, CO2 156Other air/gas/pneumatic equipment 157Pneumatic actuators 157
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 149 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
150
AC UNITS, AIR DRYERS, AIR COOLING AND HEATING COMPONENTSRelevant system groups:316, 362, 37, 433, 554, 57, 575, 601, 62, 651, 7, 73, 734, 89 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. AIR HANDLING UNITS AERON® air handling units are designed to satisfy HVAC requirements for all accommodation spaces onboard ships. We offer a flexible range of units. The units are made up of modules that enable us to deliver solutions tailor made to each vessel and ventilation room. Our products come in selections of single or dual-pipe units, low or high pressure units. AERON® Marine Air Handling Units: . are assembled from a wide range of standard sections . are available in 12 sizes up to 51000 m3/h . have very good acoustic and thermal insulation . can be delivered both as galvanised or stainless steel . are delivered with wave breakers and water traps
. fan and motor are mounted on vibration dampers with flexible connections AERON® Marine Air Handling Units are delivered with all necessary accessories in order to minimise installation work at the yard. The heat exchangers and evaporators can be delivered in any type of materials the customer demands. CABIN UNITS AERON® Marine Cabin Units and air terminals are designed for use in high speed marine air conditioning systems. Their task is to control the flow of air, its distribution and temperature. The units are tested for optimum performance. Important factors includes air throw, air induction, insulation capability and sound attenuation. We have a comprehensive range of Cabin Units. A range containing units for wall mounting or ceiling suspension, units for 1-pipe, 2 pipe, 1 pipe with reheat and a wide selection of air terminal units for low pressure systems. Air diffusers for the ceiling Cabin Units are available in square or circular shapes to fit ceiling panels. The Cabin Units is ready for easy and quick installation and may be delivered according to IMO resolution A.754 (18) for false ceilings with fire resistance rating B15. The units satisfies the Comfort Class requirements for noise, vibrations and indoor climate from Det Norske Veritas. REFRIGERATION PLANTS AERON´s range of refrigerating products will cover every need for refrigeration onboard modern ships and offshore installations. All refrigeration machineries and cooling products will be delivered according to requirements from yards, owners, classification society, and national authorities. Our refrigeration machineries are constructed for marine and offshore applications. Components and materials are chosen on the basis of our customers requirements and our long
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 150 07.08.2016 11:46:28
151
ACCOMMODATION EQUIPMENT
experience in the business. Emphasis is put on safety, energy efficiency, small dimensions, low weight and easy maintenance as well as site installation friendly solutions. The refrigeration plants can be delivered either as direct expansion systems or as chilled water plants for indirect cooling. Our plants can be delivered with aircooled or water cooled condensers, compressors for reciprocating or screw type systems, or as multi compressor units fitted with several compressors. Whatever the requirements, we will provide an optimal designed plant that meet your demands. Our refrigeration products may be delivered for ATEX or non ATEX areas. . Air cooled or water cooled Chilled water refrigeration units - CW. . Air cooled or water cooled Refrigeration units with Direct expansion - DX. . Air cooled or water cooled Split AC units for ATEX or non ATEX. . Fan coils for Chilled water or ATEX air-cooled refrigeration units. . Complete Provision room refrigeration systems. . Self Contained Units for return air or fresh air supply. . Compact Deck units with Air Handling Units and refrigeration units built together. . Taylor made cooling systems in ATEX or non ATEX. . Antenna cooling units ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. ADSORPTION DRYERS AIR DRYERS Tank drying equipment for chemical tankers. Cargo hold dehumidifiers
AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no MARINE AND OFFSHORE UPS AC and DC UPS solutions to ensure clean and secure power onboard. ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. REFRIGERATION SYSTEMS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 VENTILATION COWLS VENTILATION EQUIPMENT
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 151 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
152
TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 ADSORPTION DRYERS AIR DRYERS TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. AIR CONDITIONING Teknotherm refrigeration plants for air-conditioning of accommodation, control rooms, etc. can be delivered either as direct expansion systems or as water chilling units for indirect cooling. According to the required capacity, or to your specific demands, our plants can be delivered with compressors of reciprocating- or screw type. Normally everything assembled to a condensing unit as comprise, compressor, condenser, electric motor and necessary auxiliary equipment.. COOLING SYSTEMS Broadly assortment to freezing systems for merchant fleet and fishing fleet. For the merchant fleet we deliver cooling- and freezing systems for: Solid and liquid cargo, provisions, aircondition, inert gas and CO2. For the fishing fleet we deliver freezing systems for cargo, RSW and various freezing equipment. Service. FREEZING SYSTEMS Freezing Systems Teknotherm has for years been a leading supplier of refrigeration systems to the world’s fishing fleet. Our wide range of products covers
any kind of refrigeration installation onboard a fishing vessel, both for freezing or cooling the catch at sea. REFRIGERATION, SPARE PART Compressors, condensers, evaporators, valves, pulleys and motors. All manufacturers but mainly Danfoss, Bock, Carrier, Frigidaire, Lehmkuhl, Mycom, Tecumseh and York. Also supplier of refrigerant plants. Service
AIR & GAS VALVESRelevant system groups:3, 309, 35, 354, 37, 375, 442, 477, 513, 57, 6, 601, 651, 7, 70, 71, 72, 73, 75, 79 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 BUTTERFLY VALVES CHECK VALVES GATE VALVES REDUCTION VALVES STOP VALVES MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. ANSI VALVES BUTTERFLY VALVES CHECK VALVES
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 152 07.08.2016 11:46:28
153
ACCOMMODATION EQUIPMENT
CONTROL VALVES DIAPHRAGM VALVES FIRE VALVES GATE VALVES JIS VALVES KNIFE GATE VALVES NEEDLE VALVES SAFETY VALVES SELFCLOSING VALVES STOP VALVES VACUUM VALVES VALVES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 VALVE EQUIPMENT WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Company brochures and datasheets are available on the Internet. BUTTERFLY VALVES Spjeldventiler for skip, offshore og petrokjemisk industri. VALVES Spjeldventiler og kuleventiler for sjøvann, oljeprodukter, kjemikalier med LPG og LNG.
AIR AND GAS TREATMENT (DEHYDRATORS, AIR SEPARATORS)Relevant system groups:355, 37, 445, 558, 57, 734, 75 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet.
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 153 07.08.2016 11:46:28
ACCOMMODATION EQUIPMENT
154
DEHUMIDIFIERS High relative humidity increases the risk of corrosion, mildew, rot and problems in electronics. Humidity reduction and control has proved to be the best and most cost efficient remedy against such damage. Alfsen og Gunderson AS has since 1965 presented leading solutions based on dry air technology and humidity control. - Tank drying equipment for chemical tankers. - Cargo hold dehumidifiers - AG Air Dryer for blasting and planting. - Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2
AIR FILTERS & SPARK ARRESTERSRelevant system groups:309, 37, 43, 442, 57, 6, 601, 646, 651, 7, 70, 73, 743, 744, 745 TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 FILTERS
AIR NOZZLES, JEALOUSIES AND BATTERIESRelevant system groups:401, 404, 62, 79 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com NOZZLES Nozzles for oil burners
COMPRESSORS Sundstrand International Corporation S.A, Belgium Centrifugal compressors and blowing machines. SPERRE INDUSTRI AS 6057 Ellingsøy Telephone: +47 70 16 11 00 COMPRESSORS TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 COMPRESSORS TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. COMPRESSORS Refrigeration compressors from: Mycom, Japan Grasso, The Netherlands York, United Kingdom/USA Carrier, USA Bock, Germany Hall, England RefComp, Italy Service.
FANSRelevant system groups:37, 374, 57, 575, 89, 897 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. AXIAL FANS Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes CENTRIFUGAL FANS Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution. FANS We are offering all types of fans needed to create an optimal ventilation system for marine and offshore applications. With requisite certificates according to class and governmental requirements. Axial Fans Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms, a.o. where you transport large air volumes at relative small pressure drops. Explosion- Proof Fans for Hazardous Area
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 155 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
156
Hazardous areas onboard offshore rigs, chemical tankers, oil tankers and gas carriers, have very stringent requirements with regard to design and execution of the ventilation fans, concerning safety. We offer a wide range of special fans for installation in hazardous areas. Centrifugal Fans Typical applications for these fans are exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air distribution. Dampers and Fire-dampers We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies. Silencers We deliver any type of square and circular high efficiency silencers. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 AXIAL FANS CENTRIFUGAL FANS DECK MOUNTING FANS FANS FANS, EXPLOSION PROOF GAS FREEING FANS MIST ELIMINATOR LOUVERS
INERT GAS COMPONENTS, CO2 Relevant system groups:374, 376, 819 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. INERT GAS SYSTEMS Since the first installation in 1984, our design
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 156 07.08.2016 11:46:29
157
ACCOMMODATION EQUIPMENT
has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system. MARITIME PROTECTION AS 4620 Kristiansand Telephone: +47 908 15 987 Telefax: +47 38 01 10 25 INERT GAS SYSTEMS
OTHER AIR/GAS/PNEUMATIC EQUIPMENTRelevant system groups:196, 30, 35, 376, 381, 441, 504, 564, 57, 73, 734 TAMROTOR MARINE COMPRESSORS AS 1001 Oslo Telephone: +47 22 91 85 00 Telefax: +47 22 91 84 93 SCREW COMPRESSORS
PNEUMATIC ACTUATORSRelevant system groups:381, 601, 651, 79 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Company brochures and datasheets are available on the Internet. ACTUATORS Representing: Danaher Motion, Stockholm, Sweden: Linear actuation systems.
AIR, GAS & PNEUMATIC EQUIPMENT
133_304_CBS_2016.indd 157 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
158
ELTORQUE AS 7125 Vanvikan Telephone: +47-74 85 55 20 Telefax: +47-74 85 55 12 ACTUATORS MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se ACTUATORS We supply pneumatic double-acting or single-acting with spring return. The actuators are mainly quarterturn actuators for butterflyvalves and ball valves or multiturn for gate valves and globe valves. We also supply linear actuators for gate valves, knife gate valves and globe valves. SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 ACTUATORS
ALARM EQUIPMENTRelevant system groups:109, 12, 14, 17, 20, 381, 40, 41, 42, 425, 542, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 797, 811, 85, 86, 865, 867, 87, 871, 872, 875, 88, 89, 898 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 GAS ALARM SYSTEMS OVERFILL ALARM SYSTEMS VOICE ALARM HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 ALARM & MONITORING SYSTEMS POWER MANAGEMENT HØGLUND MARINE AUTOMASJON AS 3150 Tolvsrød Telephone: +47 33 41 41 50 Telefax: +47 33 41 49 46 ALARM LOGGER KROHNE MARINE 3950 Breivik Telephone: +47 35 56 12 20 Telefax: +47 35 56 12 21 TANK ALARM SYSTEMS
MAS FLUID CONTROL AS 1301 Sandvika Telephone: +47 67 80 71 20 Telefax: +47 67 80 71 21 ALARM SYSTEMS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. AUTOMATION SYSTEMS www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering. CONTROL AND MONITORING SYSTEMS www.siemens.no/marine PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 LIFE CYCLE MANAGEMENT Life Cycle Management
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 160 07.08.2016 11:46:29
161
ACCOMMODATION EQUIPMENT
24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. SENSORS AND INSTRUMENTS www.siemens.no/marine Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators.
CENTRALS, CONSOLES & PANELSRelevant system groups:1, 109, 12, 25, 381, 40, 424, 427, 6, 60, 61, 62, 637, 638, 65, 651, 66, 7, 70, 71, 79, 791, 792, 793, 795, 811, 84, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 CONTROLING DESKS HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CONTROL PANELS LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. INSTRUMENT CONSOLES For bridge wings, winch control and other manoeuvring purposes
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 161 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
162
Due to severe corrosion and paint problems with steel consoles, Libra has now developed GRP (Glassfibre Reinforced Polyester) consoles which completely solves these problems. They have the following features: - Fire retardant material - Corrosion- free - Solid GRP construction - Anti- magnetic - Low weight Standard colour RAL 9010 (other colours on request) Spraytight, hinged instrument cover Standard ext. colour, white RAL 9010 Steel fittings: Stainless steel AISI 316L SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions.
AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 CENTRAL HEATING SYSTEM
COMPUTER HARDWARERelevant system groups:109, 3, 381, 417, 444, 542, 792 KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 COMPUTER SYSTEMS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 COMPUTER SYSTEMS
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 162 07.08.2016 11:46:29
163
ACCOMMODATION EQUIPMENT
CONTROL & AUTOMATION SYSTEMSRelevant system groups:1, 109, 12, 14, 17, 196, 20, 3, 35, 375, 381, 40, 403, 41, 415, 42, 43, 464, 6, 60, 601, 61, 62, 63, 634, 637, 638, 64, 65, 651, 66, 7, 79, 791, 792, 793, 795, 797, 801, 811, 814, 85, 86, 861, 865, 867, 868, 87, 871, 872, 875, 88, 89, 898 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. AUTOMATION SYSTEMS CONTROL SYSTEMS To control the system we deliver everything from simple, virtually maintenance- free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.
AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 LEVEL ALARM SYSTEMS VAPOUR ALARM SYSTEMS BAZE TECHNOLOGY AS NO-3905 Porsgrunn Telephone: +47 94 80 06 00 Telefax: +47 35 10 54 99 INFOTAINMENT SYSTEMS MANAGEMENT OPERATION SYSTEMS BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no THRUSTER CONTROL, ALARM AND MONITORING SYSTEM BRUCON The trusted Control, Alarm and Monitoring System from Brunvoll Control Brunvoll has built up decades of experience in reliable solutions for manoeuvring, positioning and propulsion control. Alarm Alerts and alarms give clear guidance for decision support. Early warnings enable quick intervention, reducing risks. Monitoring BruCon condition monitoring helps to optimize performance and makes it easier to plan smarter preventive maintenance.
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 163 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
164
For Thrusters BruCon systems are specifically designed and produced for the entire range of Brunvoll thrusters. Main Propellers We provide complete control, monitoring and automation solutions for main propulsion equipment including azimuth systems from Brunvoll, and for main propulsion equipment from our strategic partners. Drive Systems We supply BruCon for all our drive systems, including constant - / variable-speed CPP and FPP with frequency converters. ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 CONTROLING DESKS ELTORQUE AS 7125 Vanvikan Telephone: +47-74 85 55 20 Telefax: +47-74 85 55 12 CONTROL INTERFACES FLOW CONTROL SYSTEM FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. REMOTE CONTROL Remote Control Electronic remote control for control of gearboxes and cp-propeller systems. Remote
control systems of all types can be supplied, as a single panel for control of pitch and rpm to larger combinator controls and single lever joy-stick systems. Standard: . Pitch indication on all panels . Control of clutch In/Out from all remote stations . Alarms for control voltage failure and pitch feedback failure . Emergency control from main panel on bridge . Control position changeover between main and slave controls, with synchronisation of the control levers . Dimming of all lights and indicators on the bridge panels Optional: . Automatic overload control where rpm and fuel consumption are the main parameters . Propeller rpm indication HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 TANK LEVEL SYSTEMS HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CAMERA STATIONS, HAZARDOUS AREAS CAMERA STATIONS, SAFE AREAS CONTROL SYSTEMS DISPLAY UNITS HØGLUND MARINE AUTOMASJON AS 3150 Tolvsrød Telephone: +47 33 41 41 50 Telefax: +47 33 41 49 46 FUEL OIL CALCULATION SYSTEM
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 164 07.08.2016 11:46:29
165
ACCOMMODATION EQUIPMENT
POWER MANAGEMENT SYSTEMS PROCESS CONTROL SYSTEMS IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 AUTOMATION EQUIPMENT SSAS - SHIP SECURITY ALERT SYSTEM IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 AUTOMATION JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 DISPERSANT SYSTEMS JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 INTERCOM SYSTEMS PUBLIC ADDRESS SYSTEM SOUND RECEPTION SYSTEMS KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 CONTROL SYSTEMS
KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com BRIDGE SYSTEMS Product groups - Automatic identification systems - AIS - Dynamic positioning - DP systems - Electronic logbooks, K-Log - Fleet Management Software - Integrated workstations - Joystick control system - Marine refit / Retrofit / Conversions - Navigator safety system - Position and reference systems - Radar and navigation systems - Ship information systems - Thruster control system - Voyage data recorders ENGINE ROOM SYSTEMS Product groups - Electronic logbooks, K-Log - Engine monitoring systems - Fleet Management Software - Marine automation systems - Marine refit / Retrofit / Conversions - Marine switchboards - Process control systems, K-Pro - Propulsion control systems - Safety system, K-Safe - Ship information systems NAVAL SYSTEMS Product groups - Naval Sonar - Portable Integrated Navigation Systems - Underwater Noise Measurement - Waterside Security SAFETY SYSTEMS Product groups - Fleet Management Software - Navigator safety system - Safety system, K-Safe
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 165 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
166
- Voyage data recorders - Waterside Security SIMULATORS Product groups - Dynamic positioning simulators - E-Learning system - Engine room simulator - GMDSS simulator - Liquid cargo handling simulator - Offshore Vessel Simulator - Ships bridge simulators - Thermal power plant simulator - VTS - Vessel traffic services simulator - Crane simulators KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex REFERENCE SYSTEMS SpotTrack laser-based reference system SpotTrack is primarily used as a reference system for relative positioning in DP operations. The SpotTrack sensor is a robust motion stabilised rotating laser sensor which measures range and bearing to one or several retro-reflective targets installed on the target platform or vessel. Automatic wave motion stabilisation provides optimum target lock. The onboard HMI unit allows for easy configuration and monitoring of the SpotTrack system. L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 AUTOMATION EQUIPMENT PLATFORM MANAGEMENT SYSTEM
LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no JOYSTICK Norways larges manufacturer of Control Levers. Supplier to leading system manufacturers all over the world. -Control lever: Type LF50, Joystick -Control lever: Type LF60, Joystick - multi-axis joysticks. MAS FLUID CONTROL AS 1301 Sandvika Telephone: +47 67 80 71 20 Telefax: +47 67 80 71 21 AUTOMATION OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com CONTROL SYSTEM The Ballast Control System allows easy operation of the Optimarin Ballast System.User-friendly interface. - Touch screen operation. - Interface with ship’s main systems. - Logging in accordance with IMO requirements. - Option of integrating ballast pumps and valves.
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 166 07.08.2016 11:46:29
167
ACCOMMODATION EQUIPMENT
PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com HIGH TEMP/HIGH VISCOCITY SYSTEMS Asphalt- / Bitumen- Liquid Pitch Pumps Twin-screw pumps Special design twin-screw pumps for handling of high temp./high viscocity liquids such as Molten Sulphur, Asphalt, Bitumen, Liquid Pitc Tar a.s.o. Heated, quensched and speed-controlled cargo pumps SCANA MAR-EL AS 3880 Dalen Telephone: +47-35 07 58 00 CONTROL SYSTEMS JOYSTICK CONTROL SYSTEMS PROPULSION CONTROL SYSTEMS THRUSTER REMOTE CONTROL, ELECTRONIC SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 HYDRAULIC CONTROLS VALVE REMOTE CONTROL SYSTEM SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet.
AUTOMATION SYSTEMS www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering. CONTROL AND MONITORING SYSTEMS www.siemens.no/marine PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 GENERATORS www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness.
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 167 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
168
Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. SENSORS AND INSTRUMENTS www.siemens.no/marine Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications.
TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. CAMERA SYSTEMS Camera Systems For any operation onboard a vessel a high quality camera monitor system is an added value. Whether being used for a view of the engine, deck areas or Heli deck, a camera system will give the operator an overview of all operations in one view. With the possibility of choosing between a fixed, zoom or pan & tilt zoom camera observation; the right type of camera can be selected for any of the processes. CONTROL STATIONS Control Stations Tranberg control stations with various numbers and types of pushbuttons, lamps etc.enableflexible sizes and solutions. Only using Stainless Steel AISI 316 and fully compliant with the latest ATEX/IECEx and NORSOK standards. ENCLOSURE SYSTEMS Tranberg develops, manufactures and distributes: ENCLOSURE SYSTEMS Junction boxes/Instrument enclosures Cable glands Panel building Switches & Distribution systems HEATING SYSTEMS Heating Complete heating solutions from individual components to complete heat tracing systems for offshore and onshore applications.
CALIBRATION EQUIPMENT MATRE Calibrators Matre calibration equipment is designed for the adjustment of thermostats and pressure-switches. The intention is to meet the demands and needs by the classifying authorities regarding the calibration of sensors in unmanned engine rooms. Common to all Matre calibrators is that they are very easy to use, dependable and easily portable. Matre Calibrators have obtained great recognition and are delivered to ship and yards worldwide. SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions.
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 169 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
170
AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.
MONITORING EQUIPMENTRelevant system groups:109, 12, 14, 17, 192, 20, 30, 35, 38, 381, 40, 41, 414, 416, 417, 42, 423, 43, 53, 6, 60, 61, 62, 637, 638, 65, 651, 66, 7, 79, 791, 792, 793, 795, 797, 803, 815, 85, 86, 861, 865, 867, 87, 871, 872, 875, 88, 89, 898 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 LEVEL ALARM SYSTEMS WATER INGRESS ALARM SYSTEMS HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 ALARM & MONITORING SYSTEMS POWER MANAGEMENT HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CCTV
IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 THERMO CAMERAS KROHNE MARINE 3950 Breivik Telephone: +47 35 56 12 20 Telefax: +47 35 56 12 21 MONITORING OF BUNKERING MONITORING OF FUEL CONSUMPTION TANK MONITORING SYSTEMS KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 CONDITION MONITORING SYSTEMS L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00Telefax: +47 32 21 17 87 MONITORING EQUIPMENT LIGHT STRUCTURES AS 0667 Oslo Telephone: +47 23 89 71 33 MONITORING SYSTEMS MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 WAVE MONITORING SYSTEMS
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 170 07.08.2016 11:46:29
171
ACCOMMODATION EQUIPMENT
PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com FUEL CONSUMPTION MONITORING PD Volummeters The accuracy of the KRAL Volumeter is unmatched. Our meters are accurate to within ±0,1 % of rate over a wide range of flow and viscosity. The reproducibility is better than ±0,01 %. With excellent service life and long-term stability, this clearly shows that sturdiness and precision are not mutually exclusive. Nine European standards laboratories used a KRAL Volumeter for a calibration intercomparison. With results beyond expectations, the report suggests using our device as the default transfer standard between kerosene laboratories SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ALARM SYSTEMS AUTOMATION SYSTEMS www.siemens.no/marine Simatic Automation Systems for every application area to enable you to automate your machines and plants economically and flexibly. This applies to plant and mechanical engineering as well as manufacturing technology and process engineering. CONTROL AND MONITORING SYSTEMS www.siemens.no/marine
PCS7 and Simatic solutions. IAS is an Integrated Automation System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 PMA is a Power Management System and responsible for the last step of regaining normal operation of the power station. The PMA 300 is integrated in the switchboard and based on Simatic S7 components. The system can be adapted to different types of ships and functional requirements, it can also be a free-standing system working independent of the automation system. RDS is a Thruster Control System and are highly scalable and applicable for all ships. The system is based on Simatic S7 and PC S7 LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages. SENSORS AND INSTRUMENTS www.siemens.no/marine
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 171 07.08.2016 11:46:29
ACCOMMODATION EQUIPMENT
172
Level, pressure, temperature, voltage, current, power and a wide range of Sensor, transmitters and actuators. SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 MONITORING SYSTEMS
ONBOARD SOFTWARERelevant system groups:109, 381, 415, 42, 542, 63, 79, 792 KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 COMPUTER SYSTEMS SEAGULL MARITIME AS 3194 Horten Telephone: +47 33 03 0910 Telefax: +47 33 04 62 79 SOFTWARE STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 COMPUTER SYSTEMS MAINTENANCE MANAGEMENT SAFETY MANAGEMENT SYSTEMS
REGULATORS & SWITCHESRelevant system groups:109, 12, 309, 381, 40, 438, 439, 442, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 7, 70, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. PUMP UNITS Transport pump units Pumps and equipment IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 PRESSURE SWITCHES LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no CONTROL LEVERS Norways largest manufacturer of Control Levers. Supplier to leading
AUTOMATION AND CONTROL
133_304_CBS_2016.indd 172 07.08.2016 11:46:29
173
ACCOMMODATION EQUIPMENT
system manufacturers all over the world. -Control lever: Type LF 50, Joystick -Control lever: Type LF 60, Joystick -Control lever: Type LF 70, to operate azimuth propellers -Control lever: Type LF 80, Rudder control -Control lever: Type LF 90, to operate propulsion and thrusters -Control lever: Type LF 120, for maoeuvering of propulsion and thruster unit -Control lever: LF 150, steering wheel -Control lever: Type LF 180, for manueuvering of propulsion units - simple, one-axis control levers in different sizes, hand wheels, rudder controls, azimuth control units and multi-axis joysticks SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used
to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.
KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com SENSORS TRANSMITTERS Product groups - Helideck Monitoring System - HMS 100 - Marine level switches - Marine pressure transmitters - Marine temperature sensors - Motion and heading sensor products - Radar based tank gauges - Sensor simulator WM-25 - Signal converters and zener barriers - Water ingress detection system - Wireless temperature monitoring for compressors - SENTRY KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex SENSORS The ultimate marine motion sensor The MRU is suitable for any maritime operation that requires attitude determination and motion compensation. Kongsberg’s range of motion sensors provides high accuracy motion measurements in all dynamic environments. They cover all marine activities, from small hydrographic vessels to large vessels and installations. Typical applications for MRUs . Motion compensation of single and multi-beam echo sounders . Orientation and attitude measurements on AUVs and ROVs . High speed craft motion control and damping systems
. Heave compensation of offshore cranes
. Dynamic positioning
. Hydro acoustic positioning
. Ship motion monitoring
. Ocean wave measurements
. Antenna motion compensation and stabilization SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.
FIRE PROTECTION & DETECTION EQUIPMENTRelevant system groups:196, 298, 374, 376, 381, 425, 505, 51, 511, 515, 57, 64, 79, 792, 797, 811, 813, 816, 817, 818 AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 FIRE DETECTION SYSTEMS GLAVA AS 1801 Askim Telephone: +47 69 81 84 00 Telefax: +47 69 81 84 78 FIRE INSULATION
HANSEN PROTECTION AS 1501 Moss Telephone: +47 69 00 13 00 Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. THERMAL PROTECTION AID Ascotherm T.P.A. product line Ascotherm T.P.A. product line Ascotherm is currently one of the most successful designs of T.P.A. available today. NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 FIRE RATED WINDOWS
FIREFIGHTING EQUIPMENTRelevant system groups:376, 421, 505, 57, 81, 813, 816, 818, 819 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. INERT GAS SYSTEMS Since the first installation in 1984, our design has undergone excessive standardization,
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 178 07.08.2016 11:46:30
179
ACCOMMODATION EQUIPMENT
minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system. AUTRONICA FIRE AND SECURITY AS, DIVISION MARITME 7483 Trondheim Telephone: +47 90 90 55 00 Telefax: +47-73 58 25 01 FIRE EXTINGUISHING INSTALLATIONS FIRE-FIGHTING EQUIPMENT WATERFOG SYSTEMS DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 FIRE-FIGHTING EQUIPMENT SPRINKLER SYSTEMS
FIRE FIGHTING SYSTEMS AS 1597 Moss Telephone: +47 69 24 49 90 Telefax: +47 69 24 49 95 FIRE-FIGHTING SYSTEMS JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 FIRE MONITORS FIREFIGHTING SYSTEMS TELESCOPIC MASTS KUMERA AS 3202 Sandefjord Telephone: +47-33 48 54 54 FIRE FIGHTING EQUIPMENT MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no Company brochures and datasheets are available on the Internet. FIRE FIGHTING SYSTEMS DIFFS / NUI MATRE Deck Integrated Fire Fighting System (DIFFS) Matre Deck Integrated Fire Fighting System (DIFFS) - specially developed to extinguish fire on helidecks. An activated DIFFS system will extinguish a major spill fire on the helideck within 15 seconds. Although - tests have shown that such fires in most cases are extinguished in less than 10 seconds.
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 179 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
180
Matre DIFFS can be automatically activated by detection system or manually by release panels (push buttons). Rescue personnel can safely perform rescue operations on the helideck even when the system is fully activated. Matre DIFFS can be used on many various installations and can be customized according to customer specifications. Today Matre DIFFS is used on various offshore installations as well as yachts and roof top helidecks. DIFFS consist of foam mixing skid and Matre pop-up nozzles. Matre DIFFS is designed in compliance to all applicable standards and regulations (CAP437, NORMAM27, ICAO, NMD, NORSOK). Matre Systems for Normally Unattended Installations: Normally Unattended Installations (NUI) can now be equipped with Matre’s Deck Integrated Fire Fighting System (DIFFS) or Ring Main System (RMS). Today NUI present their own problems when helicopters have to land on installations with only rudimentary firefighting equipment. This is set to change as the CAA (Civil Aviation Authority) now demands better safety for helicopter movements on NUI. CAP 437, Standard for Offshore Helicopter Landing Areas, states the following in chapter 5.3 appendix D that: “DIFFS on NUIs should be integrated with platform safety systems such that pop-up nozzles are activated automatically in the event of an impact of a helicopter on the helideck where a Post-Crash Fire (PCF) is a foreseeable outcome. The overall design of a DIFFS should incorporate a method of fire detection and be configured to avoid spurious activation. It should be capable of manual over-ride by the HLO and from the mother installation or from an onshore control room. Similar to a DIFFS provided for
a Permanently Attended Installation (PAI) or vessel, a DIFFS provided on an NUI needs to consider the eventuality that one or more nozzles may be rendered ineffective by, for example, a crash. The basic performance assumptions stated in paragraphs 2.10 to 2.12 should also apply for a DIFFS located on an NUI.” FIRE-FIGHTING EQUIPMENT PROPORTIONERS MATRE Foam Proportioning Equipment Matre has since the late eighties delivered specially designed foam proportioner for use on industrial, marine and offshore installations. Product development and a strong focus on safety and accuracy has led to our range of products. These are often preferred in projects where flexibility and quality are crucial for the result. The reliability of the foam proportioning system is essential in order to guarantee an effective operation. Matre offers a wide range of proportioner models and sizes. We strive to be able to deliver and meet our customer’s challenges with proven equipment and solutions. Our desire as a complete supplier of foam proportioner is to be in front with new development and to ensure that we at all times can deliver reliable, cost effective solutions to the industry. We aim to keep our position as a leading supplier of high quality foam proportioning equipment. Data Sheets: Please follow the link: http://www.matre.no/products
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 180 07.08.2016 11:46:30
181
ACCOMMODATION EQUIPMENT
MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. FIRE VALVES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve
WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no Company brochures and datasheets are available on the Internet. FIRE FIGHTING SYSTEMS A Norwegian based company, developing and producing all types of active fire fighting systems. WME also carries out research and development of Water Mist Nozzles and systems. WME performs: . Site study . Design . Engineering . Fabrication . Testing . Installation . Commissioning/Start-up Our working areas cover Oil & Gas, Petrochemical, Offshore & Marine Industry as well as Air Craft Hangars and Building market. Our commitment to excellence is based on a deep and wide experience in both Fire Engineering and Water Mist Technology. Our well-trained staff have backgrounds in the North Sea Offshore area. Among our staff you will find Fire Cybernetics and Machine Engineers. When you purchase WME products you are buying the finest fire fighting equipment possible. Our well-trained and experienced project staff will execute your order in the most professional way.
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 181 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
182
LIFEBOATS/RAFTS & OTHER BOATSRelevant system groups:443, 501, 502, 503 HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. LIFEBOATS Free-fall Offshore: Harding offers freefall systems for use in offshore applications and merchant vessels. We apply our vast experience from the North Sea into the research and development of our products. Therefore, we are able to offer you the most sophisticated and safest freefall systems in the industry today. FF1200 (70p): The FF1200 is a 70 person freefall lifeboat specifically designed to meet the latest regulations on the Norwegian Continental Shelf in the North Sea, way beyond SOLAS rules for freefall lifeboats. Free-fall Shipping: The Harding LBF-serie of free-fall lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo. All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and the electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI
316, depending on how exposed the equipment is. Notifying body: Bureau Veritas (others on request) Totally enclosed lifeboats: Harding’s totally enclosed lifeboats are designed and tested in accordance with the latest IMO/SOLAS regulations (MED 96/98 EC). Two versions are available, tanker or dry cargo. All boats are fitted with European standard equipment, with engines made by the largest lifeboat engine maker in the world, BUKH, and electrical charging system from DEFA. Steel qualities are either galvanized, AISI 304 or AISI 316, depending on equipment exposure. Notifying body: Bureau Veritas (others on request) Harding lifeboats are certified with the latest LSA Code as amended With New hooks approved according resolution MSC.320 (89) and resolution MSC.321 (89) RESCUE BOATS Harding offers a new range of rescue boat systems for offshore applications, merchant and passenger vessels. Our special designs ensure great stability and optimal working conditions on the vessel in rough sea conditions. We deliver rescue boats with petrol engine or diesel inboard engine. All boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). RRB: Harding’s rigid rescue boats have a special design that ensures great stability, as the outer and inner hulls are shaped in separate moulds. The buoyancy tank provides sufficient buoyancy to keep the boat afloat when flooded and fully manned. The boat can be delivered with or without an engine.
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 182 07.08.2016 11:46:30
183
ACCOMMODATION EQUIPMENT
We deliver rescue boats with petrol engine or diesel inboard engine. The boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). Harding fast rescue boats: Harding’s fast rescue boats can be supplied with both outboard petrol and inboard diesel engines. The boats have high-speed hulls, achieving speed up to 35 knots. Our fast rescue boats have hydraulic steering as standard. The robust GRP frame ensures good self-righting abilities, and large drain valves in the stern ensure drainage from the deck. The boats are equipped with high-quality navigation lights and switch panels (IP 56). Fast rescue boat in aluminum For rough usage under tough conditions Harding can also provide Fast rescue boats fitted with aluminum hull.The hull is designed for speed and stability, which means optimal working conditions on the vessel in rough sea conditions. The boat achieves speed up to 35 knots. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. ALUMINIUM BOATS High-speed boats in MP-design, Seabear, Alusafe and Weedo. Body sizes 5 - 25 metre. MOB BOATS Marketing of mob-boats in MP-design, Seabear, ALusafe and Weedo. Service, repairs and upgrade of all types.
RESCUE BOATS Sale of boats in MP-design, Seabear, Alusafe and Weedo. Workshop for rescue- and work boats. NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. DAUGHTER CRAFTS Norsafe has a wide range of daughter craft designed to operate away from the mother ship or offshore installations for extended periods of time. The primary function is to search for and rescue persons lost at sea. Effective search and recovery require a fast rescue craft with excellent reliability, manoeuvreability and sea keeping abilities. Combining these functions, Norsafe boats are suitable for all types of marine SAR missions. The daughter craft are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. We have daughter craft which fully comply according to current IMO requirements and all equipment has been approved in accordance with latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review.
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 183 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
184
Norsafe as reserves the right to change specification without prior notice. FREE FALL LIFEBOATS Norsafe Free-fall lifeboats (GES - Gravity Escape System) have an optimal design and a large number of ships and offshore installations are equipped with our free-fall lifeboats. The benefits are clear: rapid evacuation in emergencies, the boat slides out from a ramp onboard the ship/installation, and hits the water well away from the ship or installation with a high vertical forward motion. Passengers are safe and secure in an enclosed cabin, securely fastened to anatomically shaped seats. The lifeboat system is robust and can withstand high winds, powerful waves and extreme weather conditions. The boats can be fitted with a water spray and compressed air system for protection against fire. Advantages with freefall-system: - Maximum distance from installation - Position to water entry point - Positive forward motion after water entry - Good guidance during initial phase of drop giving stability during free fall phase - Well-proven system designed for large heel/trim angles - Robust system against heavy wind and waves from any direction Our largest boats can withstand drops from great heights up to 47m and are highly space efficient. We supply davits specially designed for our free-fall lifeboats and can adapt davits to suit all onboard conditions. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC-labeled in accordance with the Marine Equipment Directive. Our lifeboat systems also meet the new DNV-OS-E406 standard for Norwegian waters as required from 2015.
Typical specifications - are subject to revision according to customer requirements. All products are subject to continuous review. Norsafe AS reserves the right to change specifications without prior notice. LIFEBOATS Norsafe conventional lifeboats are used all over the world, both on ships and offshore installations. The smallest boats in the lifeboat range are approved both as lifeboats and rescue boats. Our largest totally enclosed lifeboat (TELB) has a capacity for 136 people and is the largest on the market. The boats are double skinned, with foam buoyancy injected into the space between the inner and outer elements. The boats also have dedicated buoyancy tanks. This means that the boats are unsinkable, even if they become damaged or in a fully flooded condition. The craft has a positive stability up to 180º and is self-righting both when it is intact and in flooded conditions. The steering rudder nozzle has been specially designed to give maximum thrust from the propeller. The lifeboat system is robust and can easily withstand the powerful winds and high waves associated with extreme weather conditions. The boats are equipped with on-load lifting hooks that are controlled from a release handle mounted at the steering position. Hooks will release simultaneously when the craft is fully waterborne. All Norsafe conventional lifeboats can be delivered with Norsafe’s new TOR MKII Hook Release System. All boats and associated equipment have been approved in accordance with the latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. The hull, superstructure, buoyant tanks, water and provision containers are all made of fire-retardant GRP. Our lifeboat
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 184 07.08.2016 11:46:30
185
ACCOMMODATION EQUIPMENT
systems also meet the new NORSOK R-002 standard required for Norwegian waters from 2015. The lifeboat’s hooks will release simultaneously when the craft is fully waterborne. Emergency release of the hooks is possible but the system is secured against accidental release. The fire protecting spray system pump takes seawater from the lowest possible location under the boat. The spray system provides water over the entire surface of the craft (1,200 l/min). The compressed air system has sufficient capacity to provide air for the maximum number of personnel and engine combustion for a minimum of 10 minutes. The over-pressure inside the boat prevents ingress of toxic fumes or gas. Provisions have been made to recharge the air system from the ship’s compressed air system. MILITARY & PROFESSIONAL Norsafe has a wide range of boats for military and professional use, and attention is paid to guarantee the highest quality. Only the best craftsmanship, components and materials are used. The boats are specially designed to operate away from shore or the mother ship for extended periods of time. Combining superb seaworthiness, manoeuvrability and high speed, the boats are ideal for all types of assistance, patrols and other special applications. The layout and performance of the boats allow wide ranging functions, including operations in hostile areas. Undetectable and task flexible The boats have a low freeboard, a sprayhood specially designed for boarding, an anti-slip deck surface. They are self-bailing, have ample deck space, a self-righting system and a sturdy foam-fi lled fender. Radar waves pass through fi breglass, giving the boats an inherent stealth capability. This combined with very little use of aluminium or steel helps reduce the overall radar signature.
For many users failure of the equipment is not - and cannot be - an option. The boats operating in the “no-failure-zone” can be equipped with a mechanical override control system for the engine electronics. Even if all on board engine electronics are heavily damaged or should fail completely, this system allows for the engines to be manually and mechanically run. Further, Norsafe can provide boats with full redundancy, where the motor, power train and all support functions are fully isolated within the craft. This ensures a safe return for the crew to land or to the mothership. Approved by authorities The boats are designed, built and equipped to comply with SOLAS regulations or similar national regulations. Other codes and certifi cation modules can be supplied. All boats are specially designed and constructed to meet the need for fully available, low maintenance, standby and operation. Following fabrication, all Norsafe boats are fully Factory Acceptance Tested (FAT) to ensure the boat performance and on board systems are fully functioning according to standard test procedures and the agreed specifi cation for the equipment. Customers are welcome to attend FAT and sea trials at Norsafe’s factory which has easy ocean access. Tailor made solutions One of the advantages for Norsafe customers is our design fl exibility, making it possible to build boats specifi cally intended to meet client requirements. Since our fi rst deliveries of professional boats all craft have been purpose equipped for specifi c tasks. Norsafe work closely with the customer to understand the requirements and produce concepts most suitable for the purpose the boats are intended for. Usually inboard diesel engines are fitted - these can be driven by waterjet, stern or surface drives. Petrol outboard motors can also be installed if preferred. Norsafe offer single, twin
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 185 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
186
or triple engine installations. This wide range of propulsion options gives a wide spectrum of operation - from shallow river or coastal operations to high speed offshore use. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice. RESCUE BOATS Norsafe has the market’s widest range of rescue boats and daughter craft for ships, offshore installations, the coastguard service, police and other rescue services. Combining superb seaworthiness, maneuverability and speed, our boats are ideal for all types of rescue, patrols and other general applications. The boats are made of GRP and have a low freeboard to facilitate rescue operations, are self-bailing, have ample deck space, a self-righting system, a sturdy foam-filled fender and are supplied with a diesel inboard motor with water jet propulsion unit or outboard petrol engines. Our specially developed davits with shock absorbers and tension system for severe weather allows our rescue boats to be launched from a mother ship even in heavy seas. In accordance with current IMO regulations, all RO-RO Pax vessels must have fast rescue boats with a minimum length of 6 m and a top speed of at least 20 knots. We have boats which fully comply with these requirements and all equipment has been approved in accordance with latest SOLAS and subsequent amendments and EC labeled in accordance with the Marine Equipment Directive. Typical specification - subject to revision according to customer requirement. All products are subject to continuous review. Norsafe as reserves the right to change specification without prior notice.
WORKBOATS Munin 980 Workboats are now ready for delivery on 6 months notice. The boat has been developed in close cooperation with the major actor in seismic operations at sea. The product has more than fulfilled all the previous expectations for total performance in operation. This workboat is designed according to the DNV 2.21 Craft (April 2010) It is equipped with standard minimum equipment according to DNV Craft 2.21regulations. All equipment and outfitting are high quality components. The workboat is designed and outfitted for fulfilling the demands for reliability, low maintenance cost and long-time heavy use. The workboat has excellent reliability, manoeuvrability and sea keeping abilities in heavy sea in order to fulfil its prime function - to perform as an effective work platform. The boat is further designed to operate away from the mother ship for extended period, with sufficient range and long-time operation, with a high gunwale around the boat providing a protected and comfortable working environment for crew and passengers. The layout and performance of the boat allow it to perform roles as multi-purpose workboat, seismic workboat, towing boom, dive support, inspection- survey- and towingduties. SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info MOB BOATS MOB boats
SeaArctic IMMERSION SUIT ARCTIC OFFSHORE SOLAS COLOUR: 290 Orange SIZES: STD. & XL LIFE JACKETS Life jackets SEALIFE LIFE JACKET SOLAS COLOUR: 290 ORANGE SEALIFE TP LIFE JACKET SOLAS COLOUR: 290 ORANGE SIZES: CHILD - ADULT SEALION Inflatable 150N OR 275N /SOLAS, HR SOLAS COLOUR: BLACK. SIZES: STD. PVC cover PASSENGER SUITS SeaPass SEAPASS PASSENGER SUIT SOLAS COLOUR: 200 Fluorescent Orange SIZES: 50-100cm / 100-150cm / 150-200cm SPECIAL SUITS SeaRescue RESCUE MAN SUIT COLOUR: 300 Fluorescent Yellow SIZES: XS-XXL NAVY QUICK DONNING / ANTI EXPOSURE SUIT COLOUR: 290 Orange SIZES: STANDARD 150 - 200cm SeaPilot PILOT SUIT COLOURS: 290 Orange / 300 Fluorescent Yellow SIZES: XS-XXL SOLAS TRANSPORT SUITS SEAAIR OFFSHORE /TRANSPORT SUIT / IMMERSION SUIT COLOUR: 290 Orange SOLAS
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 187 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
188
HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. RESCUE BOATS Harding offers a new range of rescue boat systems for offshore applications, merchant and passenger vessels. Our special designs ensure great stability and optimal working conditions on the vessel in rough sea conditions. We deliver rescue boats with petrol engine or diesel inboard engine. All boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). RRB: Harding’s rigid rescue boats have a special design that ensures great stability, as the outer and inner hulls are shaped in separate moulds. The buoyancy tank provides sufficient buoyancy to keep the boat afloat when flooded and fully manned. The boat can be delivered with or without an engine. We deliver rescue boats with petrol engine or diesel inboard engine. The boats are delivered to the latest IMO/SOLAS regulations (MED 96 / 98 AC). Harding fast rescue boats: Harding’s fast rescue boats can be supplied with both outboard petrol and inboard diesel engines. The boats have high-speed hulls, achieving speed up to 35 knots. Our fast rescue boats have hydraulic steering as standard. The robust GRP frame ensures good self-righting abilities, and large drain valves in the stern ensure drainage from
the deck. The boats are equipped with high-quality navigation lights and switch panels (IP 56). Fast rescue boat in aluminum For rough usage under tough conditions Harding can also provide Fast rescue boats fitted with aluminum hull.The hull is designed for speed and stability, which means optimal working conditions on the vessel in rough sea conditions. The boat achieves speed up to 35 knots. LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Outline Specification proposals are available on the Internet. LIFE JACKET CONTAINERS - Low weight - Minimal maintenance - Stainless steel hasps - Hot galvanized steel supports - Ventilated MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. LIFE-SAVING EQUIPMENT Marine rescue and safety epuipment. Lifesaving equipment for standby rescue vessels. Package deliveries.
AIS (AUTOMATIC IDENTIFICATION SYSTEMS) KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex AIS (AUTOMATIC IDENTIFICATION SYSTEMS) - AIS Onboard In accordance with IMO requirements all SOLAS ships in international traffic above 300 gross tons must have Automatic Identification Systems (AIS) installed onboard. We offer a wide range of different AIS for use onboard ships (AIS mobile stations) tailored to different requirements. All mobile stations are in accordance with the IMO regulations. AIS Infrastructure We provide a full range of AIS infrastructure used for shore-side and platform based AIS infrastructure. Our long record of supplying AIS infrastructure, GPS reference networks and EGNOS monitoring systems has provided us with the competence needed to undertake AIS projects of all types. We are an active member of IEC, ITU and IALA. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. SAFETY EQUIPMENT Marine rescue and safety equipment. Lifesaving equipment to standby rescue vessels. Package deliveries.
NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. HOOK SYSTEMS As a response to industry concerns, Norsafe has undertaken an extensive process to improve release gear for lifeboats. This targets safety issues, especially the avoidance of a premature release. Our new TOR MKII Hook Release System has been developed and built according to the new regulations MSC.1/Circ.1392 and MSC.1/Circ.1393, IMO resolution MSC.320(89) and IMO resolution MSC.321(89). New hook systems installed after July 1, 2014 must comply with these new regulations, and all non-compliant hook systems must be replaced before July 1, 2019. Norsafe Service stations are currently carrying out re-hooking projects worldwide. Norsafe is proud to present the new TOR MKII Hook concept, a further development on the long proven TOR MKI Hook. The new hook is intrinsically safer and includes safety devices required by operators and regulators. It has already been well received by Norsafe’s key customers and is probably the safest hook on the market. The TOR MKII Hook has been designed specifically for simplicity of use and clearly understandable operation. The yellow padlock, clearly visible on both sides of the hook - indicates that the hook is set and release cables correctly located. The locking mechanism of the new TOR MKII Hook is such that securing pins through the hook (as a locking device or set indicator) and fall preventers are not necessary.
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 190 07.08.2016 11:46:30
191
ACCOMMODATION EQUIPMENT
SCANA MAR-EL AS 3880 Dalen Telephone: +47-35 07 58 00 EMERGENCY TELEGRAPH STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 SAFETY MANAGEMENT SYSTEMS
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 191 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
192
BOATS, LIFESAVING, SAFETY& FIREFIGHTING EQUIPMENT
133_304_CBS_2016.indd 192 07.08.2016 11:46:30
193
ACCOMMODATION EQUIPMENT
CONSTRUCTION & OPERATION SERVICES
Accommondation work (including carpentry, hvac) 194Electrical and electro work 194Hiring of rigs, platforms and ships 195Inspection and testing (NDT, pressure, performance, trialtrip, etc. 195Machinery and piping work 195Maintenance, spare parts and supplies 196Other construction assistance (cleaning, rigging, stores,support) 197Repairs, modifications & docking 198Shipbuilding & offshore constructions 199Structural work and surface treatment (plate, welder,paint) 200
CONSTRUCTION & OPERATION SERVICES
133_304_CBS_2016.indd 193 07.08.2016 11:46:30
ACCOMMODATION EQUIPMENT
194
ACCOMMODATION WORK (INCLUDING CARPENTRY, HVAC)Relevant system groups:51, 54, 541, 57, 583 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. HVAC AERON® ATEX Products for Cooling of Hazardous Areas AERON® Antenna Cooling Units The AERON® range of HVAC-R cooling products for hazardous areas is ATEX compliant, reliable and suitable for location within or in connection with hazardous areas. Our ATEX product ranges complies with the ATEX directive and consist of both standard products and products tailor made to our customers’ requirements and operation environments. Our long experience in the marked and continuing developments of ATEX products, has led us to be one of the leading companies in cooling for hazardous areas in the marine and offshore business.
MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no HVAC Marine Aluminium has delivered HVAC products/solutions for decades. Our product range includes shafts, water separating inlet louvers, louver housing, dampers and hatches. The best protection and longevity for customer’’s ventilation systems is achieved by high efficiency separating performance and the use of seawater resistant aluminium. The solutions offered can be designed to fit the customer’s requirements.
ELECTRICAL AND ELECTRO WORKRelevant system groups:41, 42, 423, 66, 79, 811, 85, 86, 87, 88, 89 TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com ELECTRICAL ANTI-ICE/DE-ICE As the world market leader we provide tailor made solutions certified by DNV-GL. Delivered to more than 60 projects worldwide. ELECTRICAL INSTALLATION EQUIPMENT Installation Equipment Tranberg’s installation equipment is made to reduce installation and maintenance costs for yard andship-owner. Using only cast brass and stainless steel, manufactured to the highest standards.
CONSTRUCTION & OPERATION SERVICES
133_304_CBS_2016.indd 194 07.08.2016 11:46:31
195
ACCOMMODATION EQUIPMENT
HIRING OF RIGS, PLATFORMS AND SHIPSRelevant system groups:101, 17
MACHINERY AND PIPING WORKRelevant system groups:196, 202, 3, 40, 58, 6, 63, 634, 635, 64, 7, 8 BERGEN PLASTICS RUBBER SOLUTIONS AS 5852 Bergen Telephone: +47 55 92 57 20 Telefax: +47 55 92 57 49 METAL MACHINING IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 MACHINING PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. BOILER REPAIRING Boiler repairing. PARAT has an extensive and continuously expanding global service and repair network. Through strategic partnerships we are able to serve our clients at almost any port around the world on short notice. We can perform repairs, modifications and upgrades both at port and during transit.
CONSTRUCTION & OPERATION SERVICES
133_304_CBS_2016.indd 195 07.08.2016 11:46:31
ACCOMMODATION EQUIPMENT
196
All inquiries should be directed to our head office with 24 hour service. E-mail: [email protected] We are present with representatives or branch offices in the following countries: . USA . Brazil . United Kingdom . Namibia . Korea . Portugal . China . Denmark
MAINTENANCE, SPARE PARTS AND SUPPLIESRelevant system groups:101, 109, 17, 196, 309, 356, 443, 445, 601, 651, 70, 71, 8 STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 MAINTENANCE MANAGEMENT TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Company brochures and datasheets are available on the Internet. EJECTORS Ejectors E-mail: [email protected] Phone: +47 37 19 98 00
TeamTec Stripping Ejectors - reliable and indispensable jet pumps. TeamTec has more than 50 years experience with production of stripping ejectors, and has supplied over 75 000 units worldwide. The stripping ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. TeamTec Stripping Ejectors are superior for all-purpose stripping and have become an important part of the standard equipment on modern new buildings. The main areas of application for the TeamTec Stripping Ejectors are stripping of cargo tanks, ballast water tanks, cargo holds, engine rooms and bilge, vacuum cleaning engine rooms, as well as emergency stripping. With a combination of high quality material and skillful construction TeamTec supplies effective solutions to meet onboard requirements. Other TeamTec ejector types and products related to specific purposes: i.e. mud mixing, degassing, vacuuming and evacuation of air, gas. TeamTec’s design and production of ejector types is flexible in accordance with the customer’s requests. The TeamTec Stripping Ejectors are produced in Ni-Al-Bz, stainless steel and super duplex. INCINERATORS Incinerator E-mail: [email protected] Phone: +47 37 19 98 00 Spare Parts E-mail: [email protected] Phone: +47 37 19 98 00 Service E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Incinerators - safe and efficient waste management: TeamTec AS is a leading manufacturer of incinerators, with more than 11,000 units sold worldwide since 1972. The TeamTec Incinerators provide safe and efficient waste management, which complies with the IMO
CONSTRUCTION & OPERATION SERVICES
133_304_CBS_2016.indd 196 07.08.2016 11:46:31
197
ACCOMMODATION EQUIPMENT
regulations for both waste oil and solid waste incineration. TeamTec supplies a wide range of incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts. TeamTec Bilge water injection solutions: TeamTec water injection system for the TeamTec Incinerators is an efficient and automated disposal system for contaminated water. The system reduces operating issues related to OWS, increase sludge burning capacity and reduce NOX emissions. Older incinerator models can easily be upgraded with TeamTec’s certified water injection upgrading kit. TeamTec After Sales - worldwide service and spare parts: TeamTec provides comprehensive after sales service for all TeamTec products worldwide: spare parts, commissioning, repair service, pre-installation survey, service agreements, training and general technical support.
OTHER CONSTRUCTION ASSISTANCE (CLEANING, RIGGING, STORES, SUPPORT)Relevant system groups:101, 17, 203, 33, 45 LILAAS AS 3196 Horten Telephone: +47-33 03 18 50 Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no PRECISION MECHANICS Lilaas AS manufacture precision mechanics, details, assembled units and system solutions. The company is well known as a creative partner for ideas and problem solutions on different fields. Our highly skilled workers manage 15 CNC-controlled machines. The limit of tolerance is 0,004 mm, using among other machines, Mazak Integrex 200 for optimum complete machining and Kitamura H300SL with 200 tools and 40 palettes. Our production is based on our own or customer documentation, and is highly effective, with general integration between machinery, CAD and CAM software.
CONSTRUCTION & OPERATION SERVICES
133_304_CBS_2016.indd 197 07.08.2016 11:46:31
ACCOMMODATION EQUIPMENT
198
REPAIRS, MODIFICATIONS & DOCKINGRelevant system groups:144, 17, 414, 443 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. DOCKING SUPPORT ARMS TTS Docking support arms can be incorporated into the TTS Transfer System, or be delivered as individual units to be placed, for example, in a drydock. The docking support arms consists of a basic cradle design with a keel blocks and hydraulically operated tilting arms. The tilting arms have wooden bilge blocks gimbaling at the end. This support conforms to the shape of the hull. During docking, the tilting arms rise and press on to the hull with a minor force of one metric tons, while they resist the force of 50 metric tons. When the ship is dry, the arm is secured with a bolt. The TTS Docking Support arms are operated from a mobile hydraulic power pack. .TTS Docking Suppport Arms can significantly increase your docking capacity by increasing the docking productivity .The systems saves human power and gives the ship an exact docking position DOCKLIFT Building ring units or blocks weighing some 1,200-2,000 tonnes, instead of blocks weighing 2-400 tonnes, will significantly reduce the building time in dock. The docklift concept is
based on assembling 2-400 tonnes blocks into ring units weighing up to 2,000 tonnes. DUAL WALKING BEAM (DWB) The Dual Walking Beam (DWB) units are individual working machines, completely self-contained. They are simultaneously or individually controlled by one operator with a portable hand held control station. .A trackless Transfer System for Ship Sections .Smaller Ships and Heavy Loads .Load range: 200 tonnes up to 12.000 tonnes MULTIWHEELERS TTS can offer a cost effective, high quality, series of multiwheelers/block transporters. The standard programme is from 75 to 520 ton pay load. The system allows movement in all directions. Two vehicles might be operated simultaneously by the same driver in tandem operation, either in hard connection (platform to platform) or soft connection (signal cable). Driver cabinet on each side makes the operation easier, as well as possibility for wireless remote control. Tailor made versions are also possible on request. PANELL PRODUCTION LINES Since our first Panel Production Line delivery in 1977, TTS has delivered more than 60 Panel Production Lines to shipyards worldwide. Our solutions have in many cases been developed in co-operation with demanding customers, enabling us to build up a unique know-how of the technological challenges facing the industry’s production area. Different solutions for different requirements In order to fulfil the complexity of requirements related to production volumes, material dimensions, workshop sizes and layouts, material flow, investment and payback considerations and capacity, we offer a range of Panel Production Line solutions that
CONSTRUCTION & OPERATION SERVICES
133_304_CBS_2016.indd 198 07.08.2016 11:46:31
199
ACCOMMODATION EQUIPMENT
can be customised to any shipyard. Our Module Based Designs offer stepwise investment TTS offers modular solutions in order to accommodate yards with limited investment budgets or need for stepwise increase of panel production capacity. Thus, a Panel Production Line can be installed as a complete unit or as individual sections purchased over time. In either case, the final result is the same - a significant improvement in productivity. Attractive return on investment Due to our ability to deliver a range of options - from relatively low-tech mechanical solutions to highly automated and heavy duty solutions - our customers, ranging from small, specialised yards to large high-volume yards, experience attractive return on investment through significant improvement in productivity, capacity and quality. POWERED WHEEL TRANSPORTER (PWT) The PWT-system is a module based transfer system, developed for fast and flexible moving of ships. A sophisticated control system enables movement in all directions, at the time being easy and user-friendly to operate. The system’s flexibility makes it possible to solve all common transfer operation and cope with different load, MDL, width, blocking length etc. Several safety features help the operator to perform the transfer according to modern safety standards. The PWT-system gives excellent access to the hull/trestle and has low requirement to ground conditions. The power unit(s) might be built-in in each module, every second/third module or as a separate unit. Available payload per unit is from 90 ton to 450ton.
SHIP HANDLING TROLLEY (SHT) Ship Handling Trolley (SHT) is further cost efficient development of TTS’ well known rail trolley. Tyre wheels make the rails needless and enable the operator to move the ship “anywhere” in the yard. Like all other TTS transfer Systems fluid bed system gives full control of peak loads and load levelling properties. Each trolley has a payload of 150ton SWL and can be arranged differently depending on the load distribution and total load.
STRUCTURAL WORK AND SURFACE TREATMENT (PLATE, WELDER, PAINT)Relevant system groups:2, 203, 27, 28, 401, 404, 442, 445, 52, 53, 62 TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. BOW EQUIPMENT Bow Equipment For vessels requiring bow access, TTS offers bow equipment designed to meet the demands of maritime safety. A great number of vessels have been successfully equipped with bow doors of side-swinging type combined with the TTS patented Folding Frame bow ramp solution
BLASTING & PAINTING EQUIPMENTRelevant system groups:203, 27, 443, 444
CONSTRUCTION/FABRICATION SOFTWARERelevant system groups:10, 101, 109, 11, 12, 121, 381, 542, 792 STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 PURCHASING SYSTEMS
SCAFFOLDS, JIGS & TARPAULINS ETC.Relevant system groups:316, 443 PLANY AS 6082 Gursken Telephone: +47 70 02 68 20 Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no Company brochures and datasheets are available on the Internet. CANVAS PRODUCTS Plany heavy-duty canvas .Any size or colour .Experience .Tailormade .Customized after customer needs TARPAULINS De-Licing tarpaulins We deliver canvas-solutions with wide applications
TRANSPORT EQUIPMENTRelevant system groups:3, 32, 321, 322
CONSTRUCTION/FABRICATION EQUIPMENT& SOFTWARE
133_304_CBS_2016.indd 202 07.08.2016 11:46:31
203
ACCOMMODATION EQUIPMENT
WELDING & CUTTING EQUIPMENTRelevant system groups:191, 441 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 WELDING EQUPMENT IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 LASER CUTTING TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. T AND H BEAM WELDING LINES In co-operation with ESAB Welding Equipment AB, TTS offers a complete and efficient way of welding tailor-made beams and profiles. The lines are designed with economy and accuracy in mind, and can be delivered with additional equipment to suit special requirements for capacity and quality: .Welding of I-, T-, or L-beams, wide flange beams, columns, tapered beams or non-symmetrical beams with ESAB beam welder .Integrated handling equipment for mounting and handling of webs and flanges, as well as
handling of ready welded profiles .Special sorting and handling cranes .Profile straightening .Inductive heat compensation .Surface treatment WEB WELDING LINES The TTS Web Welding Line is designed for welding smaller ship structure components such as webs and girders. Compared to manual pre-fabrication, an investment in a TTS welding line gives potential improvements within the following areas: .Increased dimensional accuracy .Employ methods that reduces distortion .Dimensional accuracy allows the use of mechanized and robotized welding downstream .The components delivered from prefabrication to ship assembly are dimensional “accurate”. .Contributes to reduce assembly fit up time Improved working environment The line consists of a robot, which is mounted on a gantry together with the welding power source and the robot control system. The gantry travels on two rails placed on each side of the welding floor. All operations of the line are handled from the operator station placed on the shop floor, beside the rails.
CALIBRATION EQUIPMENT MATRE Calibrators Matre calibration equipment is designed for the adjustment of thermostats and pressure-switches. The intention is to meet the demands and needs by the classifying authorities regarding the calibration of sensors in unmanned engine rooms. Common to all Matre calibrators is that they are very easy to use, dependable and easily portable. Matre Calibrators have obtained great recognition and are delivered to ship and yards worldwide.
ANCHORSRelevant system groups:274, 327, 4, 43, 431, 434, 582 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. ANCHORS Anchors in all sizes in stock.
BLOCKS & SHACKLESRelevant system groups:274, 32, 327, 344, 4, 43, 434, 436, 437 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. FAIRLEAD SHACKLES Mandal Fairlead Shackle - Stainless steel mooring shackle with sleek shape designed to pass through fairleads. Available in two sizes 90 M and 120 M.
HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. HOOKS Harding offer a complete range of new high quality generation hooks that come directly from the frontline of product development, techniques and regulations. Harding’s SeaCure lifeboat release and retrieval systems (the new name for hooks) meet or exceed all IMO requirements and have an optional industry-recommended Secondary Safety System. The design is based on years of experience and feedback in service. It is safe to use and simple to operate and maintain. The SeaCure hook improves safety of crews and increases their confidence in their lifeboats. SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. SHACKLES Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D - Swivel-Forerunner - Swivel Shackles - Type ASW - Baldt Joining Shackles - Ramfor Connectors - Pear Shackles - Type Baldt - Safety Bow Shackles - Mooring Shackles - Thimbles
DECK MACHINERY & EQUIPMENT
133_304_CBS_2016.indd 206 07.08.2016 11:46:31
207
ACCOMMODATION EQUIPMENT TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. BLOCK POSITIONING UNITS (BPU`) The TTS Block Positioning Units provide a single low cost tool for increasing throughput capacity in drydocks or on slipways. The BPU is a tool for the complete micro positioning/holding task of the double bottom block. This task is normally performed by large shipyard cranes and by using BPUs, the cranes will be free to perform other tasks, increasing the shipyards throughput capacity significally. The BPU s can be operated under a block with a minimum of 3 units. 4 units is the most frequently used setup. But even more units can be added to position larger blocks or ring units.
MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 MOORING EQUIPMENT WINDLASSES RESTECH NORWAY A/S 8001 Bodø Telephone: +47-75 54 24 40 MOORING EQUIPMENT SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. MOORING EQUIPMENT Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet. WINCH BOLLARDS Winch Bollard: TTS Marine AS has developed a Winch Bollard mooring system, which makes mooring operations easier and safer than the more
DECK MACHINERY & EQUIPMENT
133_304_CBS_2016.indd 207 07.08.2016 11:46:31
ACCOMMODATION EQUIPMENT
208
conventional systems currently available. The patended TTS Winch Bollard can replace mooring winches, capstans, warping drums and the bollards normally used for mooring. Basic features for Winch Bollard: .One man operated .Direct mooring without use of stoppers .Optimal and safe control during mooring .Control stand with a foot pedal .Integrated emergency stop and a flexible cable connection .Easy controllable fail safe brakes .Stepless speed control with high light line speed .Automatically reduction of line speed when the load is increased .Low noise during operation .Self lubricated bearings for low maintenance .Compact, clean and water resistant design
CHAINS, WIRES & ROPESRelevant system groups:274, 315, 327, 33, 4, 421, 43, 431, 432, 433, 434, 436, 437, 481, 63, 88 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. ROPES 12- STRAND Twelve strand braided rope, made from DYNEEMAT HMPE grade SK 75, with a braided jacket of polyester. This gives a compact, round
rope with a circular cross section and good spooling qualities. DynamaxT Plus with Polyester jacket is manufactured for applications where heavy abrasion is expected. Polyester has low friction against steel. For special applications our Dynamax Plus can be manu-factured with other type of jackets (dyneema, composite, etc.) KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 WIRE ROPE STOPPERS WIRE ROPES SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. ANCHOR CHAINS The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in
DECK MACHINERY & EQUIPMENT
133_304_CBS_2016.indd 208 07.08.2016 11:46:31
209
ACCOMMODATION EQUIPMENT
permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations. CHAINS The largest stock of ship’s chains in The largest stock of ship’s chains in Scandinavia. - Studlink Anchor Chain Studlink anchor-chain is used for permanent and emergency anchoring of ships and other floating installation. The stud secure that every link come into the gypsy, in correct position. For use on ships the studlink anchor-chain are made in grade 1, 2 and 3. For use on mobile offshore installations and drillings rigs the chain are made in steel grade: ORQ, R3, RQ3, RQ3S, R3S, R4, R4S, R4ST (Grade R4 being the most commonly used). - Studless Anchor Chain Studless anchor-chain are made to be used in permanent moorings when the chain will not go over a gypsy. The advantages are: Less weight, fit bigger shackles without endlinks and avoid problems with loose studs. Studless anchor-chain are available in the same steel qualities as studlink anchor-chain. We supply studless anchor-chain in every size, both for fish-farm mooring and offshore installations. Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. Chain Accessories - Kenter Joining Shackles - Anchor Shackles - Type D - Joining Shackles - Type D
KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com DECK SYSTEMS Product groups - Streamer Handling System - Gun handling systems - Wide Tow Handling System - Back-deck control system - Additional seismic products - Bulk Hose Securing Unit - BHSU - eBird - Seismic cable control - Flush Manhole covers - RoJo Quick Hatch - Helideck Monitoring System - HMS 100 - Launch and Recovery System - LARS for AUV and ROV - Marine cranes - Movable Deck Extender MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 DECK MACHINERY PALFINGER MARINE NORWAY AS 5042 Bergen Telephone: +47 55 33 36 50 Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Company brochures and datasheets are available on the Internet. CRANES Cranes by PALFINGER MARINE are designed to meet the safety standards and extreme environmental conditions of the marine and offshore industry. PALFINGER MARINE and PALFINGER DREGGEN offer a comprehensive product range of knuckle boom, stiff boom and
telescopic boom cranes as well as wire luffing and travelling cranes for various applications within the shipbuilding and the oil and gas industry worldwide. ENGINE ROOM CRANES Overhead travelling bridge design, capacity of up to SWL 40 t - Handling of provision and machinery parts below deck level - Two main designs: standard headroom mono-beam design and ultra-low headroom dual-beam design - Electric, pneumatic or hydraulic power supply KNUCKLE BOOM CRANES Foldable Knuckle Boom Crane Range from 2 mt to 330 mt - Sophisticated crane geometry for effortless work - Strenghts and flexibility for loading and unloading - Compact construction for numerious applications and use Knuckle Boom Crane range from 17 mt to 3000 mt Sophisticated crane geometry for effortless work Strength and flexibility for loading and unloading Compact construction PROVISION CRANES Monorail design with a capacity of up to SWL 20 t - Designed for the efficient handling of spares and provision in harbour - Two separate hooks supported by a trolley travelling on a monorail beam operating on both sides of the vessel - Available electric or hydraulic driven STIFF BOOM CRANES Stiff Boom Crane Range from 22 mt to 3000 mt Exceptional power-to-weight ratio and mainability Slender design and additional winches
DECK MACHINERY & EQUIPMENT
133_304_CBS_2016.indd 210 07.08.2016 11:46:31
211
ACCOMMODATION EQUIPMENT
Demountable crane booms simplify transportation TELESCOPIC BOOM CRANES Telescopic Boom Crane range from 20 mt to 3000 m - Flexible for outreach and close range - Compact parking position and operator convenience - Shorter cable lenghts ensure safe load handling at close rang TRAVELLING CRANES Travelling cranes with a capacity from 50 t up to SWL - 600 For operations such as BOP/Christmas tree, pipe handling, or other specific tasks offshore - Available with special features like PLC programming, radio remote controls, design cabins, ATEX and IECEx approval WIRE LUFFING LATTICE BOOM CRANES Slewing pedestal design with a load moment of up to 3000 mt - Fully electric crane available according to EN13852-1/NORSOK R-002 - Supplied with built in electro-hydraulic or diese-built in power pack - Meeting latest offshore rules and regulations and can be supplied with a variety of features in accordance with specific customer requirements PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com DECK MACHINERY PGH 10T Tugger Winch PGH 10T Capstan PGH 10T PSV Cargo Handling hydraulically driven Capstan PGH Cargo Securing Winch
PGH Hydraulically driven PSV Cargo Securing Winch TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. BOOM CRANES Straight boom cranes Typical applications: .Hose Handling for tankers .Provision/stores cranes .Service cranes CARGO CRANES Cargo Cranes - Cylinder Luffing TTS Cargo Cranes are designed to handle a wide variety of lifting applications. The range comprises standard designs and tailor made solutions as required by the customer. The cranes are designed and built to meet all requirements from ILO as well as relevant authorities, and can be certified by any recognised Classification Society. KNUCKLE/TELESCOPIC CRANES Knuckle/telescopic cranes Type GPS (Straight), GPT (Telescopic) & GPK (Folding jib) Typical applications: .Supply vessels .Anchor handling/Tug .Research vessels .Cable and Pipe layers SIDELOADING SYSTEMS Side loading system - Conveyor system
DECK MACHINERY & EQUIPMENT
133_304_CBS_2016.indd 211 07.08.2016 11:46:31
ACCOMMODATION EQUIPMENT
212
The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side loading conveyor system. SWLs range from 6-20 tonnes. The system offers the possibility of installing an outer platform which can be used for larger tidal variations, and is also ideal for reefer ships. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity Side loading system - Side Mover The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side mover system. SWLs for one lift range from 2-8 tonnes. The system is ideal for smaller dry cargo ships and offers the possibility of tandem operation of the lifts for handling long cargo. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity. Side loading system - Side Swinger The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side swinger system. SWLs for one lift range from 4-20 tonnes. Key benefits of a side loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity.
FENDERS & BUOYSRelevant system groups:436, 503
WINCHES, DRUMS & REELSRelevant system groups:274, 32, 327, 33, 34, 381, 4, 408, 43, 432, 433, 434, 437, 464, 481, 561, 79, 88 DALSEIDE SHIPPING SERVICES AS 5397 Bekkjarvik Telephone: +47-56 18 12 00 Telefax: +47-53 18 12 01 DECK MACHINERY EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. WINCH LINES 6-STRAND KARAT® WINCHline combines the unique characteristics of the high strength KARAT®-fibres with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT® WINCHline is designed to be used on self tensioning winches and is DNV Type Approved.
DECK MACHINERY & EQUIPMENT
133_304_CBS_2016.indd 212 07.08.2016 11:46:31
213
ACCOMMODATION EQUIPMENT
6-STRAND BUOYANT WINCHlineT is a unique fibre rope with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHlineT is designed to be permanently floating and to be used on selftensioning winches. KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 WINCHES MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 DECK MACHINERY MOORING EQUIPMENT RESTECH NORWAY A/S 8001 Bodø Telephone: +47-75 54 24 40 MOORING EQUIPMENT SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. MOORING EQUIPMENT Mooring Chain - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2.
In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. MOORINGS Moorings. - Studless anchor-chain (mooring-chain) for use in aquaculture and moorings. Steel grade 2. In stock from dia 10mm up to dia 40mm both as tarred and galvanized surface. WINCHES Winches
ACCUMULATORS, CONDENSERS, CHARGERS & BATTERIESRelevant system groups:42, 81, 866 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71e-mail: [email protected] Internet: www.anda-olsen.no BATTERIES We supply a full range of batteries to all applications. BATTERY CHARGERS Wide range of battery chargers and rectifiers. We can also supply custom solutions to meet most demands. Our Anda Power Solution is a ground breaking system for DC backup power for vessels.
CONNECTORS, SOCKETS, PLUGS & DISTRIBUTION BOXESRelevant system groups:442, 447, 503, 541, 542, 7, 88, 89
CONVERTERS (VOLTAGE, FREQUENCY), RECEIVERS, EL. DAMPERS AND RECTIFIERSRelevant system groups:109, 12, 33, 34, 381, 40, 41, 42, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 74, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet.
ELECTRICAL
133_304_CBS_2016.indd 216 07.08.2016 11:46:32
217
ACCOMMODATION EQUIPMENT
DAMPERS We deliver any types of heavy duty dampers for marine and offshore applications, including sertified fire-dampers approved by classification societies. ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no CONVERTERS Wide range of DC/AC and DC/DC converters to meet any demand. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 DAMPERS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ELECTRIC MOTORS www.siemens.no/marine AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional advantages include the reliable bearing design as well as rotors with aluminum die-cast cage
for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs. FREQUENCY CONVERTERS www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems. Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled. GEARS AND TRANSMISSIONS www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness.
ELECTRICAL
133_304_CBS_2016.indd 217 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
218
Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications. TRANSFORMERS www.siemens.no/marine Wide range and type of transformers and reactors. THD - Filters Special applications.
ELECTRICAL HEATINGRelevant system groups:57, 88, 897 GLAMOX INTERNATIONAL ASA 6011 Ålesund Telephone: +47 70 14 30 16 HEATERS THERMAL TEC AS 2322 Ridabu Telephone: +47 62 58 59 30 ELECTRIC HEATED SYSTEMS TANK HEATING SYSTEMS
MACHINERY DRIVES The machinery drives are designed to be the fastest drives to install, parameter-set and commission. They are highly compact and cost effective. Equipped with cuttingedge intellegence and safety capability the drives are designed specufically to meet the production and performancenneeds og system integrators, original equipment manufactures (OEMs) and panel builders, as well as the requirements of end users in a broad range of applications. Applications: The machinery drives are designed to meet the requirements of an extensive range og machinery applications. The drives are ideal for food and beverages, material handling, lifting, textile, printing, rubber and plastics, and woodworking applications. SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ELECTRIC MOTORS www.siemens.no/marine AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional advantages include the reliable bearing design as well as rotors with aluminum die-cast cage for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs.
FREQUENCY CONVERTERS www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems. Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled. GEARS AND TRANSMISSIONS www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine
ELECTRICAL
133_304_CBS_2016.indd 219 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
220
With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications. STADT AS 6083 Gjerdsvika Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no Company brochures and datasheets are available on the Internet. AC DRIVES STADT STASCHO is a No Loss AC drive that supplies sinusoidal voltage and current to the electric motor and back to the main switchboard. This gives very low harmonic disturbances without using transformers or filters. STADT STASCHO is specially developed for marine propulsion systems, where it is used together with controllable pitch propellers.
LIGHTING EQUIPMENT & ARMATURESRelevant system groups:427, 442, 448, 503, 89, 891, 892, 893 ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no LIGHT SOURCES Widest range of light sources available, and and unmatched knowledge of special bulbs and tubes. Large stock of lamps and fixtures for marine applications in stock. DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 ARMATURE GLAMOX INTERNATIONAL ASA 6011 Ålesund Telephone: +47 70 14 30 16 ARCHITECTURAL LIGHTS AREA LIGHTING DOWNLIGHTS EMERGENCY LIGHTS EXPLOSION PROOF LIGHTS FLOODLIGHTS HELIDECK-LIGHTING LIGHTING
ELECTRICAL
133_304_CBS_2016.indd 220 07.08.2016 11:46:32
221
ACCOMMODATION EQUIPMENT
NAVIGATION LIGHTS SEARCHLIGHTS TECHNICAL LIGHTS INDOOR TECHNICAL LIGHTS OUTDOOR TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. HELIDECK LIGHTING Helideck Lighting Our unique Helideck Control System includes: Circle&H-, Flood-, Perimeter-, Status-, Obstruction lights, illuminated Windsocks and other monitoring functions related to Helideck operation. LIGHTING SYSTEMS Marine Lighting Designed in close cooperation with leading ship-owners and Naval architects and designers. Navigation-, Search-, Floodlights and Deck lights for the most demanding requirements OBSTRUCTION LIGHTS Obstruction Lights High quality medium and low intensity LED obstruction lights in accordance with ICAO, FAA. Available for use in Zone 1, Zone 2 and Safe area.
OTHER ELECTRICAL/ELECTRO EQUIPMENTRelevant system groups:344, 41, 42, 436, 442, 79, 85, 86, 87, 871, 872, 88, 89
POWER CABLESRelevant system groups:17, 423, 85, 86, 87, 88 HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CABLES TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com CABLE GLANDS Cable glands Exe / Exd Tranberg’s Exe and Exdcable glands, stopping plugs, drain plugs, adaptors and reducers are provided with O-ring seal to secure ingress protection. Made ofbrass or Stainless Steel AISI 316 material. Fully compliant with the latest ATEX/IECEx standards.
ELECTRICAL
133_304_CBS_2016.indd 221 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
222
SWITCHBOARDS & RELAYSRelevant system groups:109, 12, 381, 40, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 SWITCHBOARDS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide MAIN SWITCHBOARDS www.siemens.no/marine Low-Voltage Switchboard Medium-Voltage Switchboard
Cargo Pump Switchboard Starter Cabinets POWER SUPPLIES www.siemens.no/marine Uninterruptible Power Systems are used to ensure safe power to critical loads in modern control and computer systems. The Uninterruptible Power System will increase the safety both in compensating short mains failure or longer disruptions. AC and DC UPS systems with batteries. THD - Filters Spesial applications or voltages.
ELECTRICAL
133_304_CBS_2016.indd 222 07.08.2016 11:46:32
223
ACCOMMODATION EQUIPMENT
ENGINEERING/MANAGEMENT SERVICES & SOFTWARE
Administration, broking, finance & insurance services 224Basic design & project development services 224Certification, Qa and verification services 225Documentation & data management 225Engineering services 226Engineering software (CAD, analysis) 227Project management, construction management 227
CERTIFICATION, QA AND VERIFICATION SERVICESRelevant system groups:10, 112, 12, 32, 33, 34, 45, 501, 502 METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 COMPLETION GREEN PASSPORTS IHM - INVENTORY OF HAZARDOUS MATERIALS MED - MARINE EQUIPMENT DIRECTIVE SENIOR MARINE ADVISERS
DOCUMENTATION & DATA MANAGEMENTRelevant system groups:109, 112, 417, 542 HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 SMART LINK IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 DATA LOGGERS
METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 COMPLETION GREEN PASSPORTS IHM - INVENTORY OF HAZARDOUS MATERIALS MED - MARINE EQUIPMENT DIRECTIVE SENIOR MARINE ADVISERS SEAGULL MARITIME AS 3194 Horten Telephone: +47 33 03 0910 Telefax: +47 33 04 62 79 MANAGEMENT SYSTEMS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 DOCUMENT CONTROL EDUCATIONAL MATERIAL SPARE PARTS SYSTEMS
ENGINEERING/MANAGEMENT SERVICES& SOFTWARE
133_304_CBS_2016.indd 225 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
226
ENGINEERING SERVICESRelevant system groups:10, 108, 109, 112, 12, 14, 17, 20, 381, 40, 41, 42, 52, 54, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 88, 89, 898 MAS FLUID CONTROL AS 1301 Sandvika Telephone: +47 67 80 71 20 Telefax: +47 67 80 71 21 ENGINEERING MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no MACHINING SERVICE MATRE Machining Services Through 60 years of delivering custom-made solutions for offshore and maritime applications, Matre has gained superior experience with machining special steel - resulting in a high number of commissions as subcontractor for machined components. At Matre’s production plant our experts are equipped with modern and advanced CNC machine tools, ensuring effective production and accuracy in every minute detail. As an integral part of our quality process, we also have well-equipped premises for assembly,
control, testing and storage of machined components. METIZOFT AS 6099 Fosnavåg Telephone: +47 41 77 77 55 SENIOR MARINE ADVISERS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide
ENGINEERING/MANAGEMENT SERVICES& SOFTWARE
133_304_CBS_2016.indd 226 07.08.2016 11:46:32
227
ACCOMMODATION EQUIPMENT
ENGINEERING SOFTWARE (CAD, ANALYSIS)Relevant system groups:10, 101, 11, 12, 121, 381, 542, 792 STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 DOCUMENT CONTROL E-COMMERCE INSURANCE SYSTEMS
LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 SHIPPING MANAGEMENT
ENGINEERING/MANAGEMENT SERVICES& SOFTWARE
133_304_CBS_2016.indd 228 07.08.2016 11:46:32
229
ACCOMMODATION EQUIPMENT
HYDRAULICS EQUIPMENT, FLUID TRANSFER AND TREATMENT
EJECTORSRelevant system groups:356 TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Company brochures and datasheets are available on the Internet. EJECTORS Ejectors E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Stripping Ejectors - reliable and indispensable jet pumps. TeamTec has more than 50 years experience with production of stripping ejectors, and has supplied over 75 000 units worldwide. The stripping ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. TeamTec Stripping Ejectors are superior for all-purpose stripping and have become an important part of the standard equipment on modern new buildings. The main areas of application for the TeamTec Stripping Ejectors are stripping of cargo tanks, ballast water tanks, cargo holds, engine rooms and bilge, vacuum cleaning engine rooms, as well as emergency stripping. With a combination of high quality material and skillful construction TeamTec supplies effective solutions to meet onboard requirements. Other TeamTec ejector types and products related to specific purposes: i.e. mud mixing, degassing, vacuuming and evacuation of air, gas.
TeamTec’s design and production of ejector types is flexible in accordance with the customer’s requests. The TeamTec Stripping Ejectors are produced in Ni-Al-Bz, stainless steel and super duplex.
FLUID FILTERSRelevant system groups:309, 404, 43, 438, 442, 444, 57, 584, 6, 601, 646, 651, 7, 70, 71, 712, 73, 743, 744, 745, 761, 803 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. DRINKING WATER FILTERS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 230 07.08.2016 11:46:32
231
ACCOMMODATION EQUIPMENT
FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com OIL FILTERS Oil filters GJERDE AS, JOHN 6083 Gjerdsvika Telephone: +47 70 02 65 00 Telefax: +47 70 02 65 01 FUEL FILTER MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. STRAINERS Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve
- Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com FILTERS Optimarin offers three different 40 micron filters: FilterSafe basket type, B&K candle type, and Filtrex basket type filter. All three filter types have automatic back flushing and are self-cleaning. Removes large particles and organisms. Low pressure loss of only 0.1 - 0.5 BAR. Horizontal or vertical installation. Bypassed during de-ballasting.
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 231 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
232
FLUID NOZZLES & MIXING BATTERIESRelevant system groups:401, 404, 62, 721 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com NOZZLES Nozzles for oil burners MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no NOZZLES MATRE Nozzles Matre has developed different types of nozzles for firefighting. These are permanent installed high capacity deluge nozzles and pop-up nozzles for helideck or larger areas such as hangars or similar. Pop-up nozzle: The deck integrated pop-up nozzle can be delivered in two versions: offshore-/ ship version and yacht version. Standard material is SS316 for both nozzles and main parts in foam skid. Optional materials for nozzles are seawater resistant bronze and even titanium. The nozzles are installed flush with the deck top surface.When the system is released the nozzles will be lifted up by the water pressure
and make an effective spray distribution of water/foam mixture to the entire landing area. According to the latest requirements given in CAP-437 these nozzles are further developed. The flow from a blocked nozzle will now remain the same as a fully popped-up nozzle. In this way the system still deliver full water capacity on deck if any nozzle are blocked. Flexi nozzles: MATRE Flexi Nozzle is a high capasity deluge nozzle. Both water capacity, spread angle and jet direction can be adjusted. MATRE Flexi Nozzles are in size 1” to 4” with flow range from approx. 200 l/min. to 4000 l/min. These nozzles have adjustable direction, spread angle and capacity. The large models of the nozzle operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution. Matre Flexi Nozzle can be used when a specific area has to be covered like: - Car deck on a ferry - Tank top - Well head area The larger models of the nozzles operates as a fixed monitor with water capacity up to 4000 l/min and reaching a length of 60m when in jet position and with water/foam solution.
MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. ANSI VALVES BALL VALVES BUTTERFLY VALVES CHECK VALVES CONTROL VALVES DIAPHRAGM VALVES GATE VALVES JIS VALVES KNIFE GATE VALVES NEEDLE VALVES SAFETY VALVES SELFCLOSING VALVES STOP VALVES VALVES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 233 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
234
- Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 VALVE EQUIPMENT WESTAD INDUSTRI AS 3360 Geithus Telephone: +47-32 78 95 00 Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Company brochures and datasheets are available on the Internet. BUTTERFLY VALVES Spjeldventiler for skip, offshore og petrokjemisk industri. VALVES Spjeldventiler og kuleventiler for sjøvann, oljeprodukter, kjemikalier med LPG og LNG.
FRESHWATER GENERATIONRelevant system groups:582, 584, 761, 794 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. MEMBRANE SYSTEMS Air Products membrane systems meets your requirements for . Field-proven, robust membranes, which can withstand oil vapor as well as liquid water. . Exceptional total lifetime. . Guaranteed After Sales Services throughout lifetime. ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. DRINKING WATER TREATMENT AG possesses all technologies for treatment of drinking water and process fluids. That includes UV-sterilizers, simplex- and duplex basket filters, automatic backwash filters and mediafilters with fine ceramic media or activated carbon.
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 234 07.08.2016 11:46:32
235
ACCOMMODATION EQUIPMENT
ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. DRINKING WATER FILTERS DRINKING WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com FRESH WATER GENERATORS Fresh water generators.
HYDRAULIC MOTORS & ACTUATORSRelevant system groups:309, 381, 43, 438, 439, 601, 651, 66, 79, 898 CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Company brochures and datasheets are available on the Internet. ACTUATORS Representing: Danaher Motion, Stockholm, Sweden: Linear actuation systems. ELTORQUE AS 7125 VanvikanTelephone: +47-74 85 55 20 Telefax: +47-74 85 55 12 QUARTER-TURN ACTUATORS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com ACTUATORS Totally electric Actuator Ultra compact, high torque, easy control electric actuator for remote valve control.
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 235 07.08.2016 11:46:32
ACCOMMODATION EQUIPMENT
236
Based on permanent magnet motor technology from the PG-MAPS pumping concept. Wide range of scalable sizes, and ATEX 100 ex-proof available SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 ACTUATORS
HYDRAULIC PLANTS & EQUIPMENTRelevant system groups:3, 30, 309, 438, 439, 601, 651, 83 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com HYDRAULIC POWER PACKS Hydraulic Power Packs HPU\’s in all executions, and variations for onshore-, offshore applications SCANA SKARPENORD AS - RJUKAN 3660 Rjukan Telephone: +47-35 09 18 00 Telefax: +47-35 09 18 01 HYDRAULIC SYSTEMS
OTHER FLUID TRANSFER/TREATMENT EQUIPMENTRelevant system groups:442, 444, 481, 582, 867
PIPES & PIPE UNITSRelevant system groups:121, 196, 3, 40, 51, 6, 64, 72, 721, 722, 75, 80, 802, 804, 81, 821, 831, 928 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. SPIRO PIPES Our AERON® spiro pipe systems comes in uninsulated and preinsulated types, that complies with EUROVENT 2.2 Class C specifications for tightness and withstands negative and positive pressure up to 3000 Pa. The preinsulated spiro pipes is made of galvanized steel sheet and insulated with 16mm mineral wool that provides an excellent guarantee against heat loss during the winter, and against condensation in the period of cooling all through the summer. The fittings and pipes are ready for easy assembling as the
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 236 07.08.2016 11:46:33
237
ACCOMMODATION EQUIPMENT
fittings are supplied with a sealed rubber-ring to ensure tightness. The uninsulated and preinsulated spiropipes can also be delivered in stainless steel, suitable for outdoor installation in offshore environments. DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 ACID PROOF PIPES PIPES STAINLESS STEEL PIPES
PUMPS & PUMP UNITSRelevant system groups:3, 309, 353, 354, 356, 36, 438, 439, 465, 481, 513, 57, 581, 582, 583, 6, 64, 7, 721, 75, 76, 761, 801, 803, 813, 814, 819, 83 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. PUMPS *Centrifugal pumps - Dickow Pumpen KG *Eccentric pumps -ASV Stuebbe GmbH & Co KG *Centrifugal pump of plastic materials - ASV Stuebbe GmbH & Co. KG
*Booster pumps, water supply, industrial pumps Aturia Pumps, Italy *Air operated diaphragm pumps, air powered doble diaphragm pumps - Yamada Europe, Netherlands horizontal pumps - APEX pumps *Centrifugal magnetic coupled side channel pumps - Dickow pumpen KG, Germany *Screw pumps, eccentric screw pumps, mono pumps - Armatech FTS GmbH, Germany *Peristaltic pumps, hose pumps - Ragazzini, Italy *Centrifugal pumps bombas ercole marelli - Sundyne Marelli, Spain *Boiler feed pumps, cooling systems, booster pumps - Edur Pumpenfabrik GmbH, Germany *Diaphragm dosing pumps, piston pumps, plungerpumps, solenoid metering pumps, dosing plants - Seybert & Rahiner, Germany *OBL dosing pumps (API 675), Milan, Italy Alfsen og Gunderson AS is a leading supplier of fluid handling equipment for offshore use. We deliver centrifugal pumps and pumps systems, metering, dosing and injection pumps for chemicales. AG also designs and builds complete skid mounted units, consisting of pumps, regulation and monitoring systems acc. to API/NORSOK standards and regulations. We have inhouse engineering capacity, and can do all kind of engineering, incl. drawing and detailed design, production, automation and commissioning works. FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. PUMP UNITS Transport pump units Pumps and equipment
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 237 07.08.2016 11:46:33
ACCOMMODATION EQUIPMENT
238
PUMPS SCREW PUMPS Screw pumps JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 PUMPS TRANSMISSIONS JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com VACUUM PUMPS VacuumaratorT pumps In-line installation of the VacuumaratorT pump combined with a small footprint and low weight allows for unique installation flexibility and considerable weight savings. These advantages, along with low energy consumption, make JetsT the preferred choice for designers, yards and owners. KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 FISH PUMPS MATRE MASKIN AS 5420 Rubbestadneset Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no
PUMPS MATRE Pumps Matre Pumps comprise a wide range of specially designed, effective and reliable liquid ring pumps and centrifugal pumps. Our pumps represent state of the art pumping technology, and are results from many years of research and development - often in close cooperation with our customers. Matre Pumps are utilized by some of the worlds most recognized manufacturers of diesel engines and lifeboats, e.g Rolls Royce Marine, Wärtsilä, Hedemora Diesel, CAT Diesel, Cummins Diesel and Schat-Harding. Our pumps are delivered in salt-water resistant bronze, with shafts of stainless steel. Matre Pumps feature a robust design and withstand polluted water containing particles such as sand and shell. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com Company brochures and datasheets are available on the Internet. AGITATORS PG-Submix 60 / 80 (Hydraulic driven) Market leading product for OSV’s world wide for high yield liquid mud handling Flygt Mixers (electrically driven) World leading products for electric mudmixers DEEPWELL PUMPS PG-SLB 125 Low Share
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 238 07.08.2016 11:46:33
239
ACCOMMODATION EQUIPMENT
Twin-screw Deepwell Pumps All stainless steel / duplex steel chemical cargo-handling pumps, based on twin-screw pump technology. Positive displacement, low share, and vertially pulsation free performance with capacities up to 100m3/h and 9.0 BarG NOFO 2005-conform, hydraulically driven, ex-proof execution ENGINE ROOM PUMPS Engine Room Pumps GAS CARGO PUMPS SMB Liquid Gas, submerged, in-tank Cargo Discharge Pum Shinko - Nishishiba SMB type submerged motor pumps have been developed as the send-out pumps in LNG, LPG & DME storage stations, and pressurizing and circulating pumps in LNG cryogenic power generation plants. The pump is used in submerged condition in the cryogenic liquefied gas in the barrel installed outside of the storage tank. It can be taken out of the barrel easily by closing the valve provided between the barrel and tank, if the necessity occurs to check the pump for maintenance and inspection. MUD PUMPS Liquid oil mud pumps. PUMPS
PURIFICATION PLANTS & FLUID TREATMENTRelevant system groups:355, 382, 408, 444, 445, 501, 57, 58, 581, 582, 584, 64, 70, 722, 761, 801, 803, 867 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. PURIFICATION SYSTEMS Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors. ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. WATER TREATMENT Leading supplier of technology for all kinds of water treatment - with special expertise in straining, filtration, disinfection and pumping techniques. Also including agitators and static mixers.
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 239 07.08.2016 11:46:33
ACCOMMODATION EQUIPMENT
240
ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. COOLING WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide. REVERSE OSMOSIS PLANTS Produksjon, salg og vedlikehold av avsaltningsanlegg ved hjelp av omvendt osmoseanlegg/RO membrananlegg. Verksteder og service world wide. WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic oksygenaktivator, radon utskillere, flour filter, avsaltings filter, filtertanker, avherdingsfilter, oppherdingsfilter, mekaniskefiltere, membrananlegg/ro, UV anlegg, doserings- utstyr og filter materiale. EnwaMatic Vannbehandler for varme og kjøleanlegg, sparer energi og beskytter mot: -korrosjon -slam -luft -bakterier Verksteder og service world wide.
JETS VACUUM AS 6060 Hareid Telephone: +47 70 03 91 00 Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com SEAWAGE TREATMENT PLANTS EcomotiveTSewage Treatment Plant by JetsT A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience. KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 FUEL ECONOMIZING SYSTEMS OPTIMARIN AS 4315 Sandnes Telephone: +47 51 11 45 33 Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com Company brochures and datasheets are available on the Internet. BALLAST SYSTEMS The type approved Optimarin Ballast System is based on filtration as pre-treatment and high doses of UV irradiation for inactivation of marine organisms, viruses and bacteria, without affecting the normal operation of the ship. Ballast water is UV treated both during ballasting and de-ballasting to ensure the dual UV effect. Ballast water is only filtered during ballasting. The OBS is one of very few treatment options that does not use or generate chemicals or
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 240 07.08.2016 11:46:33
241
ACCOMMODATION EQUIPMENT
biocides in its treatment or cleaning processes. It is based on the idea that such systems should be environmentally sound, simple, flexible and easy to install, and capable of operating on both newbuilds and existing vessels. The Optimarin Ballast System is easy to install on board existing ships (retrofit) as well as on newbuilds. The modulized system is very flexible, with a relatively small footprint and weight, and will fit vessels of all kinds and sizes. The OBS can be delivered as a complete skid or as a customized solution. It accommodates a wide range of ballast water capacities and can handle flows up to 3000 m3/h (or higher upon request). The Optimarin Ballast System is normally installed in the pump or engine room and in close proximity to the ballast pumps. The OBS can be delivered in a container, on a skid or in separate pieces to allow for easy installation in most any available space. The equipment can be installed horizontally, vertically, on or suspended below deck, along the ship’s side or in several separate locations. It is relatively low weight and adds no extra noise. The OBS utilizes every square meter and does not require much space, this makes it a cost-efficient solution. UV SYSTEM The UV System was developed based on 20 years of experience in water injection on offshore platforms, water treatment for fish farming and drinking water plants in Norway.High power UV for the efficient killing or inactivation of organisms, bacteria and pathogens in ballast water. One UV lamp per chamber (167 m3/h flow rate per chamber). Standardized UV chamber, installed in parallel on a single manifold for higher flows. Developed and manufactured for installation aboard ships. Optimized for minimum maintenance and ease of operation. It is self-cleaning, with no moving
parts or need for chemical cleaning. UV and temperature sensor in each chamber. TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no BALLAST WATER TREATMENT SYSTEM TeamTec and Evonik Resource Efficiency GMBH have signed a cooperation agreement. Since February, 2016 TeamTec has taken over the manufacture, sales and service of the AVITALIS T BWTS. A filter and chemical injection system that ensures complete and environmentally benign BW cleaning in any temperature, salinity and turbidity. YARA MARINE AS 0277 Oslo Telephone: +47 47 88 85 44 e-mail: [email protected] Internet: www.greentechmarine.com Company brochures and datasheets are available on the Internet. SCRUBBERS Green Tech Marine® scrubber R15 By using Green Tech Marine® scrubbers, shipowners can continue to operate on heavy fuel oil instead of more costly marine gas oil while staying below the strict IMO requirements regarding sulphur emissions. Fuel prices of marine gas oil are expected to rise even higher in 2015 when the 0,1% sulphur limit enters into force. The Green Tech Marine® scrubbers make it simple to meet new environmental regulations by replacing your ship’s exhaust silencer - no structural modifications required. You also benefit from: .Proven reduction of SOx and PM, compliant with MARPOL Annex VI -MEPC 58 and 59
HYDRAULICS EQUIPMENT, FLUID TRANSFERAND TREATMENT
133_304_CBS_2016.indd 241 07.08.2016 11:46:33
ACCOMMODATION EQUIPMENT
242
.Hybrid scrubber - both open and closed loop operation .An extremely small footprint .Low weight resulting in minimal change to stability conditions .Energy-efficient To see some of the innovative features of the Green Tech Marine® Scrubber, point at the appropriate hot-spot with your mouse The scrubber is a hybrid scrubber and can both operate in open and closed loop. Closed loop to be used while in port and during maneuvering re-circulating the water already within the scrubber. When at sea switching to open loop again. There is no need for water treatment in open loop since the natural alkalinity of seawater neutralizes the acid. Wash water is continuously monitored at the inlet and the outlet to make sure it is in line with the criteria of MEPC 184 before it is discharged into the sea with no harm to the environment.
SEPARATORS & TRAPSRelevant system groups:382, 702, 712, 73, 803 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. SEPARATORS & COWLS AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that
yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks.
ADDITIVES & AGENTSRelevant system groups:192, 196, 27, 276, 28, 288, 3, 40, 443, 444, 5, 52, 53, 582, 584, 6, 63, 702, 80, 802, 804, 81, 821, 831 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no COMPOSITE PRODUCTS These are custom-designed products for commercial and defence applications. Structural composites can be divided into the following product categories: JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com RUST PREVENTION AGENTS Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry.
ALUMINIUMRelevant system groups:102, 196, 201, 25, 505, 52, 53, 533 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no DROPPED OBJECT PROTECTION On the topsides, the Dropped Object Protections are used for protecting decks or equipment. The Protections can be made in small panels or large protective decks and are used where swinging objects may be lifted above critical equipment. The panels can be designed to withstand the load from falling objects like drill collars, containers etc.
ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. ANTI-CORROSION AGENTS ANTI-CORROSION EQUIPMENT ANTI-CORROSION SYSTEMS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide. HELSETH A/S 6450 Hjelset Telephone: +47-71 20 29 00 Telefax: +47-71 20 29 02 HOT DIP GALVANIZING JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com ANTI-CORROSIVE AGENTS RUST PREVENTION AGENTS Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry. ANTIFOULING Seaquantum Ultra S - hydrolytic Seaquantum Classic S - hydrollytic
Seaquantum Plus S - hydrolytic Seaquantum Static - hydrolytic Seaquantum Pro U Seamate MSeamate NB Seaforce 30 Seaforce 60 Seaforce 90 Seaconomy 700 - hydrolytic Seaconomy 900 - hydrolytic
CHEMICALSRelevant system groups:123, 196, 444
COATINGS & PAINTRelevant system groups:192, 27, 276, 28, 288, 403, 406, 432, 442, 443, 52, 522, 53, 63 JOTUN COATINGS 3202 Sandefjord Telephone: +47-33 45 70 00 Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com COATINGS PAINTS Complete specter of traditional and advanced products for all types of ships, vessels, offshore and industry. PRIMERS Jotamastic 80 - Epoxy mastic primer Jotamastic 87 - Epoxy mastic primer Jotamastic 90 - Epoxy mastic primer Jotamastic Smart Pack - Primer for maintenance Jotacote Universal - hard-wearing epoxy primer Jotacote Universal N10 - hard-wearing epoxy primer
MATERIALS, PROTECTION & INSULATION
133_304_CBS_2016.indd 245 07.08.2016 11:46:33
ACCOMMODATION EQUIPMENT
246
TANKCOATING Tankguard zink Tankguard dw Tankguard special ultra TOPCOATS Hardtop AS - Shiny polyuret Paint with good color Hardtop AX Hardtop XP - Topcoat, shiny polyuretan with good color Hardtop Flexi - Topcoat, semi-gloss Hardtop Optima - Two-component polysiloxsan Topcoat Hardtop CA - two-component Hardtop Smart Pack - Topcoat for maintenance Pilot II - 1-component alkyd-based topcoat Pilot ACR - 1-component, quick-drying akryl-based Marathon - epoxy primer Marathon IQ - epoxy primer
SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com INSULATION Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound
MATERIALS, PROTECTION & INSULATION
133_304_CBS_2016.indd 246 07.08.2016 11:46:33
247
ACCOMMODATION EQUIPMENT
LUBRICANTSRelevant system groups:192, 27, 276, 28, 288, 3, 4, 43, 443, 52, 53, 63, 71 MASTO WIRE SERVICE A/S 4688 Kristiansand S Telephone: +47 38 09 70 50 Telefax: +47 38 09 70 53 e-mail: [email protected] Internet: www.masto.no Company brochures and datasheets are available on the Internet. WIRE ROPE LUBRICATORS, HIGH PRESSURE Distribution for the world-wide shipping marked: Wilhelmsen Ships Service (Unitor) together with Masto Wire Service A.S. WIRE ROPE LUBRICATORS (high-pressure). For the shipping, offshore and industrial market. Produced in Norway. World-wide export
STEELRelevant system groups:196, 2, 505, 52, 53, 801, 804
MATERIALS, PROTECTION & INSULATION
133_304_CBS_2016.indd 248 07.08.2016 11:46:33
249
ACCOMMODATION EQUIPMENT
NAVIGATION & COMMUNICATIONAntennas & transmitters 250Detection & identification equipment 251Other communication equipment 252Other nautical equipment 253Positioning & navigation equipment 253Radio & telephone communication 255Satellite communication 255
NAVIGATION & COMMUNICATION
133_304_CBS_2016.indd 249 07.08.2016 11:46:33
ACCOMMODATION EQUIPMENT
250
ANTENNAS & TRANSMITTERSRelevant system groups:411, 412, 421, 422, 423, 424, 546, 70 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. ANTENNA COOLING UNITS AERON® Antenna unit type AM is a lightweight, compact cooling unit designed for cooling of antenna systems. The AM unit is equipped with compressor, evaporator and air-cooled condenser all fitted together in a “ready to use” unit. The AM can operate at surrounding temperatures up to 65?C. The units will be delivered with thermostat and complete control panel for easy operation. The AM Unit is a compact, flexible and quiet running air-condition unit. The unit is designed to operate inside or below radar domes in a non EX zone. The unit normally has a cooling capacity of 2,5 - 3.5 kW. The unit is built in stainless steel chassis AISI 316 quality for long lasting lifetime. The construction is strong due to the harsh environment often found in demanding marine and offshore installations.
COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Company brochures and datasheets are available on the Internet. ANTENNAS VHF Comrod is a world leader in the design and manufacture of commercial marine antennas. All products are designed and manufactured to maintain exceptional performance while withstanding the rigours of the marine environment. Antennas are available covering the HF, maritime VHF, Cellular & Wireless LAN frequency bands. Multiband antennas are also available covering combinations of frequency bands. ANTENNAS, DEFENCE Forces worldwide choose Comrod products for their superior design and combat proven performance. Comrod has collaborated extensively with end users around the globe in the development of HF, VHF, UHF & SHF antennas for military applications. The result is a product line of sturdy broadband military antennas for tactical applications, consisting of handheld, manpack, vehicle, base station and shipboard antennas. The line includes combined antennas for VHF/GPS, VHF/UHF/L-Band, VHF/DECT, VHF/W-LAN, UHF/GPS, UHF/DECT and UHF/W-LAN. All antennas have been through full military testing for different programmes around the globe. Comrod sectional and telescopic support masts are used worldwide in heights from 5 metres up to heavy duty 34 metres. The sectional masts
NAVIGATION & COMMUNICATION
133_304_CBS_2016.indd 250 07.08.2016 11:46:33
251
ACCOMMODATION EQUIPMENT
can elevate headloads up to 100kg and are available with electric winch and rotator tilter units as optional extras. The telescopic mast range is available in either push up, pneumatic, winch driven or electro-mechanical models up to 24 metres with headloads up to 100kg depending on the model selected. Comrod also manufactures passive and active military antenna combining systems for both vehicle and shipboard installations. The systems are primarily designed to reduce the number of antennas on a single installation. This allows the simultaneous use of several radios to one transmit antenna, or to individual directional antennas. A receiver distribution amplifier is included to allow simultaneous reception on all receivers. ANTENNAS, MARINE & CIVIL Comrod manufactures a range of masts for civil and commercial applications. Mast configurations are available in composite sectional, composite telescopic and aluminium telescopic. Masts and accessories are in service worldwide with civil and commercial organisations for applications such as temporary mobile phone base stations, temporary lighting, elevation of optronic equipment, elevation of sensors etc. JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 ANTENNAS RADAR TRANSPONDERS ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 TV ANTENNA SYSTEMS
- AIS Onboard In accordance with IMO requirements all SOLAS ships in international traffic above 300 gross tons must have Automatic Identification Systems (AIS) installed onboard. We offer a wide range of different AIS for use onboard ships (AIS mobile stations) tailored to different requirements. All mobile stations are in accordance with the IMO regulations. AIS Infrastructure We provide a full range of AIS infrastructure used for shore-side and platform based AIS infrastructure. Our long record of supplying AIS infrastructure, GPS reference networks and EGNOS monitoring systems has provided us with the competence needed to undertake AIS projects of all types. We are an active member of IEC, ITU and IALA. MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 OIL SPILL DETECTIONS SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 ECHO SOUNDER TRANSDUCERS ECHO SOUNDERS SONAR ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 SOUND SIGNAL RECEPTION SYSTEMS
OTHER COMMUNICATION EQUIPMENTRelevant system groups:381, 416, 42, 423, 425, 43, 444, 53, 79, 792, 811, 85 HERNIS SCAN SYSTEMS AS 4809 Arendal Telephone: +47-37 06 37 00 CCTV IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 COMMUNICATION SYSTEMS THERMO CAMERAS JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 COMMUNICATION INTEGRATED COMMUNICATION SYSTEMS STAR INFORMATION SYSTEMS AS 7011 Trondheim Telephone: +47-73 87 62 00 COMMUNICATION
NAVIGATION & COMMUNICATION
133_304_CBS_2016.indd 252 07.08.2016 11:46:33
253
ACCOMMODATION EQUIPMENT
ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 INTEGRATED COMMUNICATION SYSTEMS PUBLIC ADDRESS SYSTEMS TALK-BACK SYSTEMS
OTHER NAUTICAL EQUIPMENTRelevant system groups:4, 417, 427, 7, 8, 893 GLAMOX INTERNATIONAL ASA 6011 Ålesund Telephone: +47 70 14 30 16 FLOODLIGHTS NAVTOR AS 4370 Egersund Telephone: +47 51 49 22 00 Telefax: +47 51 49 22 01 WEATHER PREDITION EQUIPMENT TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. SHIP HORNS FROM CLASSIC “HONKS” TO COMPLETE ACOUSTIC SYSTEMS A Kockum Sonics whistle is not only high-quality design, it also contains the experience of more than 1 million TYFON® installations!
Audibility is determed not simply by the strength of sound emenating from the whistle - much more is entailed to overcome absorption, distortion and local noise. This quality is the result of more than 80 years of development. The TYFON® fulfi ls all current IMO and national authority regulations. ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 CENTRAL CLOCK SYSTEMS
KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex GPS / GLONASS - DARPS - Differential Absolute and Relative Positioning Sensor The DARPS product line combines high- performance sensors for reliable and accurate absolute and relative positioning of two vessels such as a shuttle tanker and a FPSO/FSU. The DARPS has proven itself over and over in harsh environments worldwide. - DPS - Differential Positioning Sensor Our Differential Position Sensors - DPS product line is developed for applications demanding reliable, accurate and quality-controlled position and velocity. The system has been well-proven and adapted by professional marine and offshore users worldwide. Typical applications include dynamic positioing systems, docking control and high-speed vessels. NAVIGATION / POSITIONING SYSTEMS Seapath Our Seapath systems are designed to meet the position, attitude and heading requirements ofhydro acoustic positioning and seabed mapping systems. The Seapath integrates GPS and inertial navigation technology to optimize accuracy in bathymetric surveys, seismic surveys and ADCP (Acoustic Doppler Current Profiler) systems. RADius RADius is a relative positioning system developed for operation in harsh and demanding environment utilising radar technology. As a stand-alone system, or interfaced with dynamic positioning or integrated bridge systems, RADius provides an extremely accurate and responsive ald to loading and
unloading procedures for operations in all weather conditions. Docking and all loading procedures are also applications that can take advantage of the RADius system. REFERENCE SYSTEMS SpotTrack laser-based reference system SpotTrack is primarily used as a reference system for relative positioning in DP operations. The SpotTrack sensor is a robust motion stabilised rotating laser sensor which measures range and bearing to one or several retro-reflective targets installed on the target platform or vessel. Automatic wave motion stabilisation provides optimum target lock. The onboard HMI unit allows for easy configuration and monitoring of the SpotTrack system. L-3 COMMUNICATIONS VALMARINE AS 3007 Drammen Telephone: +47 32 21 81 00 Telefax: +47 32 21 17 87 NAVIGATION SYSTEMS NAVTOR AS 4370 Egersund Telephone: +47 51 49 22 00 Telefax: +47 51 49 22 01 ELECTRONIC CHARTS TRANBERG A.S. 4068 Stavanger Telephone: +47-51 57 89 00 Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com NAVIGATION Aids to Navigation ( Aton ) NAVAIDS We specifically design to meet or exceed all known operational and safety requirements for aids to navigation on offshore installations. Tranberghas for 30 years been the exclusive distributor for Tideland products in Norway.
NAVIGATION & COMMUNICATION
133_304_CBS_2016.indd 254 07.08.2016 11:46:33
255
ACCOMMODATION EQUIPMENT
RADIO & TELEPHONE COMMUNICATIONRelevant system groups:41, 412, 42, 421, 422, 423, 424, 425 IKM INSTRUTEK AS 3262 Larvik Telephone: +47 33 16 57 00 Telefax: +47 33 16 57 01 TELEPHONE SYSTEMS VHF RADIO JOTRON AS 3280 Tjodalyng Telephone: +47-33 13 97 00 Telefax: +47-33 12 67 80 TELEPHONE SYSTEMS - BATTERYLESS UHF RADIO VHF RADIO KONGSBERG SEATEX AS 7462 Trondheim Telephone: +47 73 54 55 00 Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex COMMUNICATION The Maritime Broadband Radio (MBR) is developed for use in maritime applications where digital high-speed reliable communication and data transfer are crucial for efficient and safe operations. MBR operates in the 5 GHz frequency band and has proven high capacity communication over distances in excess of 50 kilometres. Operating as a maritime “information highway”, the MBR connects crews and their vessels with a high-speed and high capacity
digital communication channel with “fast track” priority options. The system can securely carry a diverse array of op¬erational information, from real-time video to system data, and remotely situated teams can work together seamlessly, co-or¬dinating systems and activities for optimal performance, safety and operational success. ZENITEL NORGE AS 3194 Horten Telephone: +47 40 00 27 00 BATTERYLESS TELEPHONE SYSTEMS TELEPHONE SYSTEMS
AGGREGATESRelevant system groups:109, 12, 309, 381, 40, 438, 439, 6, 60, 61, 62, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 861, 865, 867, 87, 871, 872, 875, 89, 898 SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. GENERATORS www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide
COMBUSTION ENGINERelevant system groups:109, 12, 381, 40, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 665, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 SERVOGEAR A/S 5420 Rubbestadneset Telephone: +47-53 42 39 50 PROPULSION SYSTEMS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine
With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise.
EXHAUST COMPONENTS & SILENCERSRelevant system groups:109, 601, 641, 651, 74, 743, 744, 745 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. SILENCERS We deliver any type of square and circular high efficiency silencers. NYBORG A/S 6230 Sykkylven Telephone: +47-70 25 40 80 Telefax: +47-70 25 29 08 SILENCERS
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 259 07.08.2016 11:46:34
ACCOMMODATION EQUIPMENT
260
ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 EXHAUST GAS ECONOMIZER
FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. GEARBOXES Single Stage Gearbox The reduction gearboxes are designed for engines between 150 kW to 8000 kW. Maximum input speed is from 3200 rpm to 1000 rpm for the largest gearboxes. The reduction ratio is from 2:1 up to 10:1. The largest reduction is done by an additional gear train. The gearboxes can be delivered with PTO’s for hydraulic pumps or shaft generator. GXU Gearbox GXU gearboxes are designed for vessels where the size of the engine room is limited. The gearbox can be delivered with different center distances for best possible arrangement in the engine room. The gearbox is engineered with a solid design for high reliability in operation. PTO’s for hydraulic pumps or shaft generator can be delivered. Twin Input - Single Output Twin input - single output gearboxes is often used when variable power to the propeller is required. The gearbox can be operated with one or two engines at the same time. In vessel were extra reliability is required this is a good solution. The engines can either be placed in front or behind the gearbox. PTO’s for hydraulic pumps or shaft generator can be delivered. The gearboxes are manufactured with following main components: . Cast steel gearbox housing . Input shaft arranged for flexible coupling . Hydraulic operated multi-plate clutch for secure and soft engagement . Gearwheels with hardened and ground helical teeth for silent operating
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 260 07.08.2016 11:46:34
261
ACCOMMODATION EQUIPMENT
. Hydraulic built in servo unit for secure propeller pitch setting . Output shaft with flange arrangement for propeller shaft coupling . All bearings of roller type with a low friction losses and long lifetime . Spherical roller thrust bearing with a low friction losses and long lifetime All parts are made of the most suitable material qualities. JASON ENGINEERING AS 3003 Drammen Telephone: +47-32 20 45 50 Telefax: +47-32 20 45 60 GEARS KUMERA AS 3202 Sandefjord Telephone: +47-33 48 54 54 GEARBOXES MARINE GEARS TRANSMISSION EQUIPMENT TRANSMISSIONS SERVOGEAR A/S 5420 Rubbestadneset Telephone: +47-53 42 39 50 GEARS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. ELECTRIC MOTORS www.siemens.no/marine
AC low and medium voltage motor for all applications. Synchronous motors. DC motors. Optimum efficiency and therefore lower operating costs. High power density and compact design result in a lower space requirement and lower weight. Additional advantages include the reliable bearing design as well as rotors with aluminum die-cast cage for a high degree of reliability and low additional losses (stray losses) The bearings are designed for the highest degree of reliability. In turn, this results in excellent vibrational behavior, longer lifetime and lower service & maintenance costs. FREQUENCY CONVERTERS www.siemens.no/marine Our frequency converters combine the highest technical quality with versatile functionality: from the basic converter to the high-performance converter. Each frequency inverter belonging to the family allows flexible circuit connection of inputs and outputs for optimum link-up of a broad variety of digital and analog signals and interface to all systems. Converter and applications for Cargo pumps, Cranes and Winch. Air or water cooled. GEARS AND TRANSMISSIONS www.siemens.no/marine With drive components and systems designed to provide the optimum solution between engine and propeller, with the highest reliability, minimum maintenance cost, and for the most cost-effective performance. With our focus on individual industrial needs we apply the latest technology from our various international manufacturing facilities and service centres to meet the needs of our customers worldwide. LIFE CYCLE MANAGEMENT
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 261 07.08.2016 11:46:34
ACCOMMODATION EQUIPMENT
262
Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise. STARTERS www.siemens.no/marine Electrical motor starters Direct starters, star delta, soft starters, direction change starters. Low and high range applications.
GENERATORS, ALTERNATORS & DYNAMOSRelevant system groups:109, 12, 196, 376, 381, 40, 543, 6, 60, 601, 61, 62, 637, 638, 65, 651, 66, 665, 79, 791, 792, 793, 795, 85, 86, 861, 865, 867, 87, 871, 872, 875, 89, 898 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. NITROGEN GENERATORS Since the first installation in 1984, our design has undergone excessive standardization, minimizing both production time and price level. The main focus has still been to keep the quality that you as end customer should expect from a market leader. All systems are manufactured and tested at our works; Made in Norway. Small Capacity Cabinets up to 420Nm3/h The new cabinet range is standardized based on best marine practice, yet with inbuilt capabilities to satisfy special needs. Air Products Norway welcomes any contact where the customers’ needs can be discussed in detail - to help finding the best technical and economical solution for your needs. Large Capacity Cabinets above 420Nm3/h Air Products Norway continuously strives to maintain its No. 1 position as the leading
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 262 07.08.2016 11:46:34
263
ACCOMMODATION EQUIPMENT
marine nitrogen generator supplier and today’s generation nitrogen generators are result of our full dedication to this market and to our customers’ needs. Smaller footprint and more flexible, still giving the user full access to the few maintenance areas of the system. SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. GENERATORS www.siemens.no/marine Low and High voltage synchronous generators as a robust and compact product prepared for a wide range of application. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide THERMAL TEC AS 2322 Ridabu Telephone: +47 62 58 59 30 GENERATOR SYSTEMS
WATER MIST ENGINEERING AS 4640 Søgne Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no NITROGEN GENERATOR SYSTEMS Air-gas separation membranes are sensitive to contaminations from hydrocarbon aerosols/liquid (i.e. oil products) in the sense that such contamination cannot be removed nor can the membrane be regenerated, without running the risk of destroying the membrane. Most membrane based nitrogen generators have traditionally been equipped with oil lubricated feed air compressors, which increases the risk of oil contamination of the membranes. Traditionally, this problem has been dealt with by applying traditional filtration techniques upstream the membrane, and increasing the feed air temperature after filtration, in order to create a gap between the actual temperature and dew point temperature of oil & water vapor. Even though filtration equipment is installed, there will always be a risk of oil vapor carryover into the membrane. One of the situations that may contribute to this risk is that the traditional air-gas membrane normally has a recommended max. operating temperature of 50 °C. The compressor cooling water available may have a temperature of 36 °C, which, owing to the feed air temperature rise across the compressor, may result in a feed air temperature of as much as 46 °C, prior to the temperature increase required to avoid vapor condensation. This leaves us with a temperature gap of only 6 °C, which is not enough to avoid vapor condensation, because there is a temperature drop higher that this across the membrane, during the separation process. With the new ETech membranes, these problems are avoided, because, at first, the membrane material, polyamide, consists of a single composition, and not, as many other membranes, a dual composition, where the
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 263 07.08.2016 11:46:34
ACCOMMODATION EQUIPMENT
264
governing membrane is a thin layer applied on to a substructure. The two layers are normally of different materials. The polyamide may withstand a much higher temperature (typically as much as 130 °C), and may easily operate at a temperature of 60 °C, thus avoiding the risk of vapor condensation owing to lower operating temperatures. If however, there should be a vapor carryover, due to filtration failure or excess oil carryover from compressor, then the ETech membranes may be regenerated. ETech can therefore offer an exchange arrangement, provided that ETech membranes are already installed. It is quite apparent, the cost savings in such an arrangement, as opposed to purchasing brand new membranes. The Life Cycle Cost of Nitrogen generator can be reduced with as much as 60% compared to a normal membrane set up, and will also contribute to increased safety, in terms of regularity and system capacity.
Brunvoll is committed to developing new propulsion units with CPP technology. To complement our range with azimuth FPP Azimuth Thrusters, we are working together with Steerprop Ltd, in Finland. For conventional CPP propulsion, we have a collaboration with Finnøy Gear & Propeller to enable complete delivery of thruster units combined with main propulsion equipment including gears, shaft line, and propeller. This teamwork makes it possible for Brunvoll to offer coordinated systems for automation of propulsion and manoeuvring. CENTA TRANSMISJONER A.S. 3206 Sandefjord Telephone: +47-33 48 31 00 Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no FLEXIBLE ENGINE MOUNTS Flexible engine mounts. Vibration, noise and shock control. KYMA AS 5116 Ulset Bergen Telephone: +47-55 53 00 14 Telefax: +47-55 53 00 17 FUEL ECONOMIZING SYSTEMS
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 264 07.08.2016 11:46:34
265
ACCOMMODATION EQUIPMENT
PROPELLERS & IMPELLERSRelevant system groups:109, 12, 202, 381, 40, 404, 6, 60, 601, 61, 62, 63, 631, 634, 635, 637, 638, 65, 651, 66, 79, 791, 792, 793, 795, 85, 86, 865, 867, 87, 871, 872, 875, 89, 898 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no BOW PROPELLERS PROPELLERS The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters
- LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters - Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon FINNØY GEAR & PROPELLER AS 6487 Harøy Telephone: +47 71 27 60 00 Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. PROPELLERS CP Propeller The CP Propellers are manufactured from 1000 mm to 5000 mm in diameter. They are delivered with 3, 4 or 5 blades. The propeller hub and blades are manufactured in Ni.Al.-bronze. They can also be delivered in Stainless steel. The hydrodynamic blade design calculations are based on detailed analysis in computers together with Finnøy’s long experience. The propeller shaft is hollow bored and made of carbon steel or stainless steel. The pitch is adjusted by the push - pull rod. It transfers the axial force from the servo piston in the gearbox to the pitch setting mechanism in the propeller hub. The propeller hubs, type P26 to P48, are grease lubricated and from P39 to P125 are oil lubricated. The stern tube is delivered complete with bearings, sealing boxes and a gravity tank for stern tube oil. The stern tube can be delivered suitable for either oil or water lubrication. The sealing boxes are Finnøy’s own design, but other types can also be supplied. The propeller shaft flange is a split type for the smaller shafts and an oil shrink type for the larger shafts.
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 265 07.08.2016 11:46:34
ACCOMMODATION EQUIPMENT
266
Benefits of controllable pitch propellers compared to fixed pitch propellers: . Secure and precise manoeuvrability . An increase in the average speed . Stern tube wear is reduced . A constant speed at engine is possible . Easy replacement of spare blades . Engine wear is minimized . Reduced fuel costs . Dynamic position of vessel possible . Stepless speed control of the ship . Load control of engine is possible . Full power available under all conditions . The propeller can be designed for free running and towing Propeller Design All ships have individual needs. Speed is important for some ships. Towing pull is more important for others. To satisfy these needs Finnøy use the most suitable software together with Finnøy’s knowledge when designing propeller blades. The propeller blade is designed for best possible performance regarding thrust, efficiency, noise and vibration. The blades are ground and balanced according to ISO 484 standards. Nozzle With ships that need maximum towing thrust a nozzle could be fitted. The nozzle increases the bollard pulls by approx 30%-40% over an open propeller absorbing the same power. It can be delivered as a steering or fixed nozzle. HELSETH A/S 6450 Hjelset Telephone: +47-71 20 29 00 Telefax: +47-71 20 29 02 PITCH PROPELLERS, CONTROLLABLE PROPELLERS
SERVOGEAR A/S 5420 Rubbestadneset Telephone: +47-53 42 39 50 PROPELLERS PROPULSION SYSTEMS SIEMENS AS, MARINE & SHIPBUILDING 7037 Trondheim Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Company brochures and datasheets are available on the Internet. LIFE CYCLE MANAGEMENT Life Cycle Management 24h Service +47 815 365 24 E-mail: [email protected] www.siemens.no/marine Our life cycle services are designed to optimize the overall performance of your entire ship. Increase plant availability and assure long- term competitiveness. Our service offers maintenance, upgrades, spare parts and On-call services worldwide PROPULSION SYSTEMS www.siemens.no/marine With our modular drive systems, you`ll enjoy benefit which are key to your ship`s profitability: Our experienced systems specialists develop a customized design that`s tailored to suit your technical and budgetary requirements. With Siemens drives onboard, you`ll know that Your vessel will be backed by the quality of the world`s leading electric propulsion system specialists - who can offer you a global network of services and other resources in case any problems arise.
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 266 07.08.2016 11:46:34
267
ACCOMMODATION EQUIPMENT
STEERING EQUIPMENT & STABILIZERSRelevant system groups:285, 40, 401, 403, 405, 637 HALVORSEN POWER SYSTEM 4020 Stavanger Telephone: +47 992 85 600 FIN STABILIZATION MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 STEERING GEARS SCANA MAR-EL AS 3880 Dalen Telephone: +47-35 07 58 00 STEERING GEARS
THRUSTERS AND PODSRelevant system groups:404, 63, 635 BRUNVOLL A.S 6422 Molde Telephone: +47-71 21 96 00 Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no Company brochures and datasheets are available on the Internet. AZIMUTH COMBI THRUSTERS AZIMUTH COMBI THRUSTERS Azimuth Combi Thrusters - a unique Brunvoll solution The Brunvoll Combined Retractable Azimuth/Tunnel Thruster is a retractable azimuth thruster that can also be used as a conventional tunnel thruster. It provides unique opportunities for innovative and flexible use of thruster functionality for different types of vessels. Technical features - Locking device to secure in stowed position - Electric motor integrated in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance AZIMUTH THRUSTERS, RETRACTABLE RETRACTABLE AZIMUTH THRUSTERS Demand is growing for Brunvoll’s Retractable Azimuth Thrusters
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 267 07.08.2016 11:46:34
ACCOMMODATION EQUIPMENT
268
Brunvoll Retractable Azimuth Thruster Systems have proved their reliability in challenging applications for Offshore Service Vessels, Shuttle Tankers, Coast Guard, Navy, Fishing and Research Vessels. These thruster systems provide manoeuvring capabilities that extend the operational weather window of the vessel, increasing capacity, flexibility, productivity, and safety. Technical features - Locking device to secure in stowed position - Electric motor in vertical position - Only one gear - Hull cover reduces drag and protects the thruster - Minimal footprint - Designed for harsh environments - Easy inspection and maintenance - Option for complete plug-in installation LOW NOISE TUNNEL THRUSTERS LOWNOISE TUNNEL THRUSTERS NO 1 in LowNoise Thrusters Brunvoll pioneered the LowNoise concept in 1977. Since then, we have continuously refined our solutions into a proven concept. Today, Brunvoll is recognized world wide as the major supplier of effective LowNoise thruster solutions. Noise levels of 75-88 dB(A) are typical in cabins next to and above conventional tunnel thrusters. Brunvoll’s advanced technology can cut this by up to 15 dB(A). Combined with other measures, noise reductions of up to 20-25 dB(A) have been verified. REM DRIVEN THRUSTERS (RDT) RIM DRIVEN THRUSTERS (RDT) The Brunvoll RDT Concept with major potential in different areas. The Brunvoll Rim-Driven Thruster saves space and lower environmental impact with exceptionally low noise.
The thruster, propeller and motor are in one compact unit There is no need for an external motor, shafts or couplings. Water-lubricated bearings eliminate the need for lube oil, and the risk of oil pollution. With no central shaft and no dynamic seals, there is less risk of damage due to line and rope entering the thruster. Permanent magnets provide greater flexibility in selection of motor speed (number of motor poles) and a motor with high efficiency running at a lower temperature. Planned development of the RDT concept - Retractable Azimuth - Flexibility - Efficient manoeuvring - Highly compact - small footprint - Minimal height - Minimal space needed - Can be placed in narrow skeg - Low noise and vibration THRUSTERS The Complete Thruster System Quality components seamlessly integrated - from a single source Thruster Systems are our only business Our extensive experience and expertise is available to our customers. Brunvoll is a single-source supplier and takes full responsibility for the whole thruster system. Brunvoll provides fully integrated thruster solutions complete with drive motors, hydraulic power units, BruCon control, alarm and monitoring system. Each system can be optimized to meet the needs of the individual vessel and operation. We offer electric and diesel drive systems. We provide service and support for the lifetime of the Thruster System. - Tunnel Thrusters - LowNoise Tunnel Thrusters - Retractable Azimuth Thrusters
POWER GENERATION, PROPULSION& MANOUVERING
133_304_CBS_2016.indd 268 07.08.2016 11:46:34
269
ACCOMMODATION EQUIPMENT
- Azimuth Combi Thrusters - Rim Driven Thrusters (RDT) - BruCon TUNNEL THRUSTERS TUNNEL THRUSTERS Small or large - a comprehensive range of Tunnel Thrusters. We focus on developing ever more reliable, optimized and cost-effective systems . Refined continuously through 4 thruster generations We have delivered thousands of tunnel thrusters for fishing, cruise, naval, merchant and offshore vessels - a success story for generations. Standard & Customized Brunvoll offers a scope of supply to suit your needs. Our portfolio of in-house expertise enables us to develop effective solutions for challenging projects. Our design engineers work together with the yard’s hull design team to achieve cost-effective thruster installations.
ANCHOR, PIPE & CABLE HANDLING EQUIPMENTRelevant system groups:274, 43, 432, 433, 48, 6, 601, 798, 88 EUROROPE MARINE AS 3212 Tønsberg Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. MOORING LINES 8-STRAND KARAT® MAXI Plus has become standard terminology in high quality mooring applications. Very high strength/weight ratio allows substantial size reductions and ease in handling, as well as providing excellent overall economy. The new KARAT® MAXI PLUS ropes have the same properties but offer a higher MBL and much better abrasion resistance. The new KARAT® MAXI PLUS is DNV Type approved. 8-STRAND EuroRope Marine supplies a wide range of KARAT® MAXI PLUS mooring tails to suit different dimensions steel wire mooring ropes. We can offer both single leg TAILS and double leg endless RINGTAILS. MOORING LINKS Tønsberg Mooring Link - galvanised steel mooring link of compact design typically utilised as connection between wire rope and fibre tail. Available in three sizes 90 T, 120 T and 180 T. 300 T can be supplied on special request.
WINCH LINES 6-STRAND KARAT® WINCHline combines the unique characteristics of the high strength KARAT®-fibres with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT® WINCHline is designed to be used on self tensioning winches and is DNV Type Approved. 6-STRAND BUOYANT WINCHlineT is a unique fibre rope with a 6-strand “wire rope lay” construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHlineT is designed to be permanently floating and to be used on selftensioning winches. KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00 Telefax: +47 52 85 68 02 ANCHOR HANDLING SYSTEMS KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 STREAMER HANDLING SYSTEMS
CARGO HANDLING EQUIPMENTRelevant system groups:3, 307, 315, 32, 325, 327, 374, 376, 481, 7, 8 KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com TANK GAUGING AND MEASUREMENTS Product groups - Ballast and service tank gauging - Cargo monitoring and control system, K-Gauge
- Crude oil interface Level Measurement system - Custody transfer system, K-Gauge CTS - Loading Computer system, C-Loading - Marine refit / Retrofit / Conversions - Radar based tank gauges - Tank overflow protection system MACGREGOR PUSNES AS 4818 Færvik Telephone: +47 37 08 73 00 Telefax: +47 37 08 61 21 BOW LOADING SYSTEMS (BLS) STERN OFFLOADING SYSTEMS MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no FLEXIBARRIER FlexiBarrier is a product developed to cope with the rough handling of goods and containers offshore. Adjacent railing and protection systems in lay-down areas can often be damaged, causing work delays and safety problems. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com CARGO PUMPS LFL* Special Cargo Pumps Engineered solutions in full compliance with APEx / IMO 673 a.s.o. OSV Cargo Pumps
SPECIAL PURPOSE EQUIPMENT
133_304_CBS_2016.indd 273 07.08.2016 11:46:34
ACCOMMODATION EQUIPMENT
274
PG-MACS patented, proprietary Multi Applicatio Cargo Solution CARGO SYSTEMS - Crude Cargo Systems - Deepwell Pumps - Gas Cargo Pumps - High Temp/High Viscocity Systems - Hydraulic Power Packs - LFL Special Cargo Pumps - Liquid Mug Agitators - OSV Cargo Pumps - Tank Cleaning Machines - Acid & Toxic Cargo Handling Solution CRUDE CARGO SYSTEMS Crude Cargo Systems Electric, hydraulic, or steam turbine driven cargo solutions for tonnage up to ULCC\’s SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. LASHINGS Lashings TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. CARGO REFRIGERATION Teknotherm cargo refrigeration plants can be supplied for ships carrying food for human consumption and industrial solids or liquids.
Refrigeration plants for full size reefers or partly refrigerated vessels carrying frozen or chilled goods are available as two different systems. Either as direct system with evaporation of the refrigerant directly in the aircoolers, or as indirect systems by means of circulating cold brine through the aircoolers. Teknotherm refrigeration plants for cooling of low boiling point liquids on board chemical tankers or product carriers are normally designed as indirect systems. The cargo is cooled by means of circulating a cold water/glycol mixture through cooling coils located in each cargo tank. RSW SYSTEMS RSW systems - Ideal for pelagic (purse seining and mid-water trawling) - Enables preservation of large catches, by cooling the catch rapidly to a temperature that allows storage on board over time, without significant reduction in quality - Has enabled large quality of mackerel, horse mackerel and herring to be used for human consumption - Improves quality on fishmeal by better rawmaterial - Reduced quotas set higher standards - better product means better price Teknotherm RSW plants mean rapid chill-down and storage of the catch in Refrigerated Sea Water. Storing the catch in RSW is an effective and cost-saving method of preserving the catch until landing ashore or further processing on board. The catch is brought down close to the freezing point of seawater in a minimum time by Teknotherm`s highly efficient RSW-chillers of flooded shell & tube type.
SPECIAL PURPOSE EQUIPMENT
133_304_CBS_2016.indd 274 07.08.2016 11:46:34
275
ACCOMMODATION EQUIPMENT
TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. SIDELOADING SYSTEMS Side loading system - Conveyor system The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side loading conveyor system. SWLs range from 6-20 tonnes. The system offers the possibility of installing an outer platform which can be used for larger tidal variations, and is also ideal for reefer ships. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity Side loading system - Side Mover The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side mover system. SWLs for one lift range from 2-8 tonnes. The system is ideal for smaller dry cargo ships and offers the possibility of tandem operation of the lifts for handling long cargo. Key benefits of a side-loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity. Side loading system - Side Swinger The most efficient way to load or discharge unitised cargo, pallets and paper rolls is by the shortest possible path - through the ship’s side - using a TTS side swinger system. SWLs for one lift range from 4-20 tonnes. Key benefits of
a side loading system are: low damage rates; operation independent of tidal variations; small demand on port facilities; and high loading capacity.
DRILLING EQUIPMENTRelevant system groups:34, 344, 35, 375, 481
FISH FARMING EQUIPMENTRelevant system groups:46 SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info AQUACULTURE Aquaculture
FISH PROCESSING EQUIPMENTRelevant system groups:25, 355, 46
SPECIAL PURPOSE EQUIPMENT
133_304_CBS_2016.indd 275 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
276
FISHING AND HUNTING EQUIPMENTRelevant system groups:317, 322, 432, 433, 461, 463, 464, 465 KARMØY WINCH A/S 4291 Kopervk Telephone: +47 52 85 68 00Telefax: +47 52 85 68 02 FISH PUMPS NET HANDLING EQUIPMENT SIMRAD AS 3190 Horten Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 CATCH MONITORING SYSTEMS TRAWL SONARS
- Helideck monitoring system - HMS 100 The helideck monitoring system is used to analyze helideck motion during helicopter landings to improve safety in hostile weather conditions. The HMS 100 monitors helideck attitude and vertical velocity, wind speed and direction, air temperature and barometric pressure and presents this information to indicate landing conditions. The HMS 100 is typically used offshore on floating production and storage vessels (FPSO) and seismic vessels. MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Company brochures and datasheets are available on the Internet. HELICOPTER DECKS Impressive weight reduction - no maintenance required - no painting - no repainting. Aluminium ensures a substantial weight reduction. The alloy used for Helidecks has the mechanical properties of mild steel and merely one-third of its weight. In addition, the extrusion technology provides the designers with possibilities that are impossible with steel. The Helidecks can be tailor made to fulfil the customer’s requirements and the delivery can differ from a package for container transport to a completely installed “turn key” Helideck with lighting, fire-fighting etc.
SPECIAL PURPOSE EQUIPMENT
133_304_CBS_2016.indd 276 07.08.2016 11:46:35
277
ACCOMMODATION EQUIPMENT
SUBSEA & SEISMIC EQUIPMENTRelevant system groups:10, 196, 276, 3, 353, 354, 414, 438, 481, 6, 7, 802, 804, 81, 813, 821, 831, 871, 872, 875 KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 SEISMIC PRODUCTS KONGSBERG MARITIME AS 3601 Kongsberg Telephone: +47 32 28 50 00 Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com CAMERA SYSTEMS Product groups - Underwater Camera Systems - Industrial CCTV Camera Systems - Harsh Environment CCTV Systems: - Offshore Drill Support CCTV - Commercial Vessel CCTV - Other Marine CCTV - Naval Ships CCTV - Naval Submarine TV - Naval Underwater Vehicle and Diver Deployed Cameras UNDERWATER VEHICLES - AUV Product groups - HUGIN Autonomous underwater vehicles - REMUS Autonomous underwater vehicles - Underwater vehicle instruments - Launch and Recovery System - LARS for AUV and ROV - NavLab - Generic simulation and post-processing navigation software
Commercial off the shelf We design and manufactures the REMUS and HUGIN product lines of commercial off the shelf (COTS) autonomous underwater vehicles (AUV). REMUS has been a tremendous success with more than 200 vehicles (2012) delivered. Remus vehicles are used in a wide number of applications including navies, hydrography and marine research. HUGIN AUVs boast operational experience from commercial and naval operations. Hugin operations have taken place in all parts of the world, in shallow to deep water, in arctic and tropical waters. REMUS and HUGIN vehicles have different capabilities and thus different applications and roles. They are available with short delivery times. MIROS AS 1372 Asker Telephone: +47-66 98 75 00 Telefax: +47-66 90 41 70 OCEANOGRAPHICAL SYSTEMS PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com SUBSEA PUMPING SOLUTIONS PG-MAPS PG-MAPS Quad 1500 PG-MAPS Quad 1500 (Patent Pending) represent the most novel, low shear, high efficiency, positive displacement pumping solution currently presented to the market.
SPECIAL PURPOSE EQUIPMENT
133_304_CBS_2016.indd 277 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
278
Well Stimulation, Boosting, Scale Squeeze, Chemical Injection, Kill Mud, Drill Cuttings, Water Injection and Sandaband a.s.o. are most relevant applications in the oil & gas sector
SPECIAL PURPOSE EQUIPMENT
133_304_CBS_2016.indd 278 07.08.2016 11:46:35
279
ACCOMMODATION EQUIPMENT
STRUCTURES & OUTFITTING DETAILSBins, baskets, boxes and containers 280Brackets, bolts, fasteners and locking devices 282Davits and masts 282Ducts, channels, trays and pipe support 284Gratings & drains 284Hatches, covers, ports, ramps & platforms 285Ladders, railings, stairs, ramps & gangways 286Plates and profiles 287Sections, foundations, pillars, structural units andbulkheads 287Watertight/weathertight doors & windows 288
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 279 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
280
BINS, BASKETS, BOXES AND CONTAINERSRelevant system groups:315, 317, 322, 327, 362, 48, 481, 503, 505, 866 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. CONTAINERS Our AERON® container’s can be delivered both for marine and offshore applications. These can be delivered fully insulated and with necessary light, ventilation, cooling and heating. You only need to supply electricity and necessary water and ventilation ducts. We may deliver containers for storage of special equipment in ATEX or non ATEX, and containers with complete HVAC-R systems for accommodation or technical rooms. The systems may be designed according to customers’ requirements and all will be delivered in accordance with relevant rules and regulations. Typical applications: . Storage of lithium battery packages in ATEX with necessary HVAC . Storage of painting equipment in ATEX with necessary HVAC. . Container with complete HVAC Systems for accommodation . Container for cooling of Instrumentroom or
Technical rooms . Container with complete provision room cooling system . Containers for temporary refuges with necessary equipment. . Other tailor made solutions in ATEX or non ATEX. Examples of AERON® HVAC container. . Containers with Mist Eliminator louvers, Air Handling Units, fans etc. . Refrigeration machinery with air-cooled or water cooled condensers. . Cooling system with necessary heat exchangers, integrated pumps. . Complete solutions with integrated PLC automation & control system. ANDA-OLSEN AS 6020 Aalesund Telephone: +47-70 17 89 70 Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no BATTERY BOXES Battery containers and battery racks for all types of vessels LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. BATTERY BOXES - Low weight - Maintenance-free - Self-extinguishing - Resistant to battery acid - Ventilated
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 280 07.08.2016 11:46:35
281
ACCOMMODATION EQUIPMENT
- Recommended by the Norwegian Maritime Directorate and Approved by Germanischer Lloyd CABINETS FOR EQUIPMENT Libra GRP Equipment Cabinets: The cabinets are used for Life Jackets, Survival Suits, Stretchers, Fire Fighting Equipment, First Aid Equipment, etc. LIGHT WEIGHT - THERMAL INSULATION - NO CORROSION CONTAINERS Libra Plast AS have many different GRP containers. Click on the usage area thats closes to your requirement. Libra GRP Battery Containers: Libra supplies between 500 and 1000 battery containers per year for the marine industry. Type Approved by GL. LIGHT WEIGHT - NO CORROSION Libra GRP Containers: Libra produces GRP Containers for multiple purposes for the offshore industry. They are mainly used to store MOB and Emergency Equipment on deck. You can find the following examples of a MOB Equipment Storage Cabinet Libra GRP Life Jacket Containers: Libra supplies Life Jacket Containers for the marine industry. Typical customers are Ferries, Passenger Vessels and Cruise Vessels. LIGHT WEIGHT - NO CORROSION LIFE JACKET CONTAINERS - Low weight
- Minimal maintenance - Stainless steel hasps - Hot galvanized steel supports - Ventilated MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. MUDBOXES Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve
DAVITS AND MASTSRelevant system groups:411, 412, 501, 502 COMROD COMMUNICATION A/S 4120 Tau Stavanger. Telephone: +47-51 74 05 00 Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Company brochures and datasheets are available on the Internet. MASTS Masts Tactical masts for military use are one of the main product categories at Comrod France SA, the company’s French subsidiary.
All masts are manufactured at the company’s production facility in France. Lerc SA supplies telescopic, sleeve, man-pack, manual and motorised masts. The company can also provide a complete antenna and mast system for rapid deployment. Key features of the mast products include easy maintenance, standard and tailormade versions, and advanced control systems for unmanned use of the masts. Sleeve masts constitute the main product category in this segment. Lerc has superior expertise and a well-proven track record for calculating, designing and manufacturing masts, especially for large and heavy top-load applications. HARDING SAFETY AS 5472 Seimsfoss Telephone: +47 53 48 36 00 Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. DAVITS Harding’s unique Totally Enclosed Davit concept has established a new standard when it comes to safety, cost of installation and savings on mainetnance cost. The integration of highly efficient electrical and hydraulic systems into the davit structure provides optimal protection against wear and tear. The Total Enclosed Davit’s is intended for long term, reliable operation in harsh and hazardous marine and offshore environment. Then enclosed design also makes a perfect fit for operation under arctic climate conditions. Our davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 282 07.08.2016 11:46:35
283
ACCOMMODATION EQUIPMENT
on Marine Equipment (MED). The carefully considered and epoch-making design of our NPD system is an advantage when it comes to maintenance and service, installation and deck preparations and for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch Ship Davits: Harding NPD series davits are specifically designed for safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments Rig Davits Harding NRD-series davits are specifically designed for the safe and efficient launching and retrieval of lifeboats. All equipment is integrated inside the davit structure. The davits are intended for long-term, reliable operation in harsh and hazardous marine and offshore environments. The davit system is designed in accordance with the latest IMO/SOLAS requirements, LSA Code and European Council Directive 96/98 on Marine Equipment (MED). Its carefully considered and epoch-making design, is an advantage when it comes to maintenance and service, installation and deck preparations, and also for heating in Arctic climates. The lifeboat is launched either from inside the boat or using the remote control unit supplied as standard. Recovery of the lifeboat is performed by an electric/hydraulic winch. Our FAD davit system is ideal if you need
flexible hook distance. The fixed arms can be situated on deck according to your applicable hook distance. MARITIME PARTNER AS 6022 Ålesund Telephone: +47-70 17 15 65 Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com DAVITS Davits suitable for all MP craft can be offered in package with the craft. In co-operation with major davit manufacturers, Maritime Partner can deliver davits or cranes specially designed for all MP-craft. An optimal solution to fit on any vessel can be tailor made. Both for newbuildings or retrofitted to existing vessels. NORSAFE AS 4852 Faervik Telephone: +47-37 05 85 00 Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. DAVITS Lifeboat davits: - A-frame cantilever davits for marine and offshore. Life boats - “A Series” - Cantilever davits for platform installations and similar. Life boats - “C Series” - Cantilever davits for platform installations and similar. Life boats - “D Series” - Single pivot gravity davits for ships and similar. Life boats - “E Series” - Low build luffing davits for restricted height installation. Life boats - “LH Series” Rescue boat davits: - A-frame luffing davits for rescue & fast rescue
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 283 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
284
boats - “NDA Series” - Cantilever davits for rescue & fast rescue boats - “NDC Series” Combi davits for rescue boats/ liferafts: - Slewing davits for life rafts and rescue boats - “NDSC Series” Free fall boat davits: - Free fall boat davits for ships and offshore installations. Lifeboats - “HD” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “H” Series - Free fall boat davits for ships and offshore installations. Lifeboats - “SW” Series SOTRA ANCHOR & CHAIN AS 5363 Ågotnes Telephone: +47-56 32 68 50 Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Company brochures and datasheets are available on the Internet. DAVITS Davits TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet. FENDER DAVITS Fender Davits: TTS Marine AS is a supplier of dual point davits for fenders. TTS is specialized in creating solutions to meet your requirements.
We are able to offer davit and Yokohoma fender as a complete package RESCUE BOAT DAVITS Rescure Boat Datits TTS Marine AS is a supplier of single point davits for life saving equipment according to SOLAS (LSA). TTS has choosen DNV as a Notified Body and the standard davits are supplied with EC Type-Examination Certificate. TTS is specialized in creating solutions to meet your requirements and can also offer davit and boat as a complete package. VESTDAVIT AS 5160 Laksevåg Telephone: +47 55 54 92 00 Telefax: +47 55 34 24 04 DAVITS
DUCTS, CHANNELS, TRAYS AND PIPE SUPPORTRelevant system groups:51, 88
GRATINGS & DRAINSRelevant system groups:1, 15, 196, 505, 52, 53
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 284 07.08.2016 11:46:35
285
ACCOMMODATION EQUIPMENT
HATCHES, COVERS, PORTS, RAMPS & PLATFORMSRelevant system groups:30, 303, 304, 311, 374, 51, 52, 53, 601, 651, 79 LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. HATCHES Libra’s weathertight hatches type WTH are made of GRP sandwic. Low weight makes this hatch easy to operate and open, and is above all important through emergency hatches during escape. - High strength - Low weight - No corrosion = Low maintenance - Weight saving - app. 60% less than steel Steel, alu. or GRP hatches available Raised, flush or emergency type with spring hinges. TTS MARINE AS (NORWAY) 4606 Kristiansand Telephone: +47 38 04 95 00 Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet.
SERVICE PLATFORMS Service platforms: TTS has designed a range of platforms for use in routine service work and installation, significantly including tunnelling work for the mining industries. The platforms all feature double or triple-telescopic booms and are built with strong and rigid support. Over 2,700 TTS service platforms have been delivered to customers around the world, all supplied ready for connection to the customers’ hydraulic system. TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet. HATCH COVERS Offshore - Hatch Covers Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. TTS Ships Equipment AS can supply different type of hatch covers as Sliding type, Side hinged single flap, etc. Tailor made solutions are available upon request, depending on ship design and purpose. MOON POOL HATCH COVERS Offshore - Moon Pool Hatch Covers Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. Moon pool hatch covers are based on standard hatch cover design principles with special attention to slamming forces and bottom sea
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 285 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
286
pressure. Tailor made solutions are available upon request, depending on ship design and purpose. .Top sliding .Top 1 or 2 sections .Top folding .Bottom sliding .Bottom 1 or 2 sections .Bottom folding
LADDERS, RAILINGS, STAIRS, RAMPS & GANGWAYSRelevant system groups:503, 52, 533, 564 MARINE ALUMINIUM A.S 4299 Avaldsnes Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Company brochures and datasheets are available on the Internet. ACCOMMODATION LADDERS Marine Aluminium can supply a wide range of Accommodation ladders including: - Telescopic ladders - Fixed ladders - Bulwark ladders - Pilot ladders The accommodation ladders and gangways can be made with: - curved steps, - fixed ribs - perforated non-slip grating - adjustable steps The ladders will be custom built according to your specification. Some items are however also in stock.
GANGWAYS Marine Aluminium was the first, and is by far the most experienced manufacturer of aluminium gangways in the world. Marine Aluminium’s telescopic gangways are a very important offshore safety feature, and although the main purpose is personnel access between offshore installations, it can also be used to support utility transfer lines for fuel, mud, electricity and water. RAILING SYSTEMS The field installed railing systems are highly versatile and can be adapted to any structure. The advantages of using field installed railing systems are the reduced weight, easy installation and ease of modification or configuration. The system can be installed offshore without any hot work. STAIRWAYS Marine Aluminium Stairways are an integrated part of the Marine Aluminium Railing System. The stairways can be delivered as completed assemblies, designed and built to meet each customer’s unique requirements or have the stairway system built on site if preferred. Marine Aluminium’s flexible system designs make either option possible. TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. RAIL TRANSFER SYSTEM The Ship Rail Transfer System is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects.
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 286 07.08.2016 11:46:35
287
ACCOMMODATION EQUIPMENT
The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 350 tons. .The transfer system operates on one level .No pit required .Flush rails will allow for cross traffic all over the yard
PLATES AND PROFILESRelevant system groups:196 TTS SYNCROLIFT AS 1441 Drøbak Telephone: +47 64 90 79 10 Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. PROFILE AND BEAM CUTTING LINES For processing profiles and beams, TTS offers fully automated cutting lines with integrated systems for handling and robotic cutting. A TTS profile and beam cutting line deliveres consistent high quality cuts on all kinds of profiles and beamsflatbars, bulb profiles, angles, T-beams and U-channels. TTS Interactive Macro Assignment for Cutting - CIMA, is a PC based software package used for offline programming of profile parts. The profile and beam cutting line is a module-based system that can be intergrated to form a complete system, suitable for larger shipyards and the heavy steel industries, as well as smaller steel production facilities. Features that may be included are:
.Logistics system for transport, processing and buffering of all types of profiles .Integrated PC and PLC control system .3D sensing and compensation .Accurate length measuring system .Scrap and small piece handling .Text and ID marking of profiles .Reference line marking .Bending line marking .Automatic drying of profiles .Edge celaning of profiles .Profile grinding and sorting system Minimal installation and start up time is achieved through full scale testing of each cutting system before shipment to customer.
SECTIONS, FOUNDATIONS, PILLARS, STRUCTURAL UNITS AND BULKHEADSRelevant system groups:201, 30, 38, 48, 524, 58, 583 KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 DECK EXTENDERS SAINT-GOBAIN WEBER 0614 Oslo Telephone: +47-22 88 77 00 Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Company brochures and datasheets are available on the Internet.
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 287 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
288
DECK SELFSMOOTHING SCREED Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor and Marine dB-Floor. - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine A-60 Floor: DNV A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound
WATERTIGHT/WEATHERTIGHT DOORS & WINDOWSRelevant system groups:109, 304, 51, 512, 513, 514, 515, 52, 53, 57, 951 AF OFFSHORE AERONMOLLIER AS 4400 Flekkefjord Telephone: +47 38 32 78 00 Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. WEATHER LOUVERS Humidity does more damage than most people realise. Humidity leads to corrosion which
will shorten the lifespan of machinery, metal structures, electrical installations and electronic systems. Installation onboard offshore platforms and various types of ships are often exposed to extreme environmental conditions. Louvers in general, particular the intake louvers, are often exposed to larger amounts of water from heavy rain, strong winds, green sea and water spray. To ensure the longevity of the louvers, but also to increase the lifespan and performance of machinery, electronic systems and more, a well dimensioned and high quality intake louver systems is always well invested money. AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminium alloy or in stainless steel. The droplet separators can be combined with a filter coalescor system for water and dust separation. All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goose necks. ELPRO INDUSTRIER AS 7318 Agdenes Telephone: +47-40 00 67 40 Telefax: +47-72 49 12 17 DOORFRAMES WINDOW FRAMES
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 288 07.08.2016 11:46:35
289
ACCOMMODATION EQUIPMENT
IMS AS 4994 Akland Telephone: +47 37 14 32 00 Telefax: +47 37 14 32 01 DOORS, WATERTIGHT SAFETY WINDOWS LIBRA-PLAST AS 6060 Hareid. Telephone: +47-70 09 54 00 Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Company brochures and datasheets are available on the Internet. Outline Specification proposals are available on the Internet. DOORS Watertight doors. Weathertight doors. Watertight and weathertight in A0 and A60. Spraytight bulkhead doors, insulated. Hatches, flush/raised DOORS, LIGHTWEIGHT Libra Accommodation Composite Doors (AC): Lightweight, non-combustible interior doors for High-Speed and Light Craft Vessels. EXTREMELY LIGHTWEIGHT - EASY TO INSTALL - GOOD DESIGN Libra Lightweight Sandwich Doors (HSC): Libra Lightweight Doors (HSC) have been designed to comply with the HSC code (High-Speed and Light Craft regulations). In addition, these doors are ideal for Ferries, Cruise Vessels, Marine Vessels, Yachts, etc. DOORS, SPRAYTIGHT Libra Spraytight GRP Doors (ISD): Libra Spraytight Doors (ISD) are made from Glassfiber Reinforced Polyester (GRP) composite. The weight of the GRP Doors is only
1/3 of steel doors and the sandwich construction gives them excellent thermal insulation. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. .Steel or Aluminium coamings .Single dogs or Quick Acting .Delivered with either 30mm or 100mm corner radius Libra Spraytight Steel Doors and Hatches (SR): Libra Spraytight Doors (SR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. Libra Spraytight Aluminium Doors and Hatches (SR) Libra Spraytight Doors (SR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Spraytight Doors are normally used as external bulkhead doors above the 2nd deck. DOORS, WATERTIGHT Libra Watertight Steel Doors and Hatches: Libra Watertight Steel Doors have DNV type approval certificate and comply with International Load Line Convention 1966 DNV-OS-C301, the Norwegian Veritas’ rules for Classification of Mobile Offshore Units. Libra Watertight Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate water plane according to damage stability calculations. Libra Watertight Steel Doors may also be used in connection with SOLAS Chapter II-1 Part B Regulation 20-2.2, and the Stockholm Agreement. Libra Watertight Steel Doors may also be used below bulkhead deck in positions where a
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 289 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
290
hinged door is acceptable, and where the actual water pressure is 50kN/m2 or less. Libra Watertight Aluminium Doors and Hatches: Libra produces Watertight Aluminium Doors on request. These doors will be made in accordance with the requirements set by Classification Societies. Libra A-60 Fire-rated Watertight Steel Doors and Hatches: Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Watertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations/Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Watertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. Libra Watertight A-60 Steel Doors may be used on passenger vessels (SOLAS Chapter II-1 Part B Regulation 8) above bulkhead deck and above the equilibrium or intermediate waterline according to damage stability calculations. The Libra Watertight A-60 Steel Doors may also be used on cargo vessels (SOLAS Chapter II-1 Part B-1 Regulation 25.9) above equilibrium or intermediate waterline according to damage stability calculations, and these doors can also be used in connection with SOLAS II-1/20-2.2 and the Stockholm Agreement.
Libra Watertight A-60 Steel Doors may be used below bulkhead deck in positions where a hinged door is acceptable and where the actual water pressure is not greater than the design pressure given by DNV. DOORS, WEATHERTIGHT Libra Weathertight GRP Doors (WTD): Libra Weathertight Composite Doors and Hatches are built in compliance with the International Load Line Conventions and are Type Approved by most Classification Societies. LIGHT WEIGHT - EXCELLENT THERMAL INSULATION - NO CORROSION. Libra Weathertight Steel Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Steel and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as external bulkhead doors on weather deck (positions 1 and 2), where sill height of 380 / 600mm is required. Both standard and custom sizes are available. Libra Weathertight Aluminium Doors and Hatches (WR): Libra Weathertight Doors (WR) are made from Aluminium and can be delivered with either 30mm or 100mm corner radius. Weathertight Doors are normally used as external bulkhead doors on weather deck (position 1 and 2), where sill height of 380 / 600 mm is required. Libra A-60 Fire-rated Weathertight Steel Doors and Hatches:
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 290 07.08.2016 11:46:35
291
ACCOMMODATION EQUIPMENT
Fire-rated A-60 Doors can be delivered with optional Quick Acting or Wheel Operating Closing System. Libra Weathertight A-60 Steel Doors have DNV-MED type approval certificate and comply with the requirements in the following Regulations / Standards: Annex A.1, Item No. A.1/3.16 and Annex B, Module B in the Directive SOLAS 74 as amended, Regulation II-2/9.4.1.1.2, II-2/9.4.1.2.1 and II-2/9.4.2 and IMO FTP Code. Libra Weathertight A-60 Steel Doors are approved for use as an integrated part on fire-retarding divisions of class A-60. The fire insulation and surface materials which are used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. The Libra Weathertight A-60 Steel Doors may be used in access openings according to DNV Ship Rules Part 3 Chapter 3 Section 6 and the International Convention on Load Lines Chapter II Regulation 12 NORAC A/S 4857 Arendal Telephone: +47-37 05 92 50 Telefax: +47-37 05 92 51 DOORS DOORS, WEATHERTIGHT FIRE RATED WINDOWS SHIPS’ WINDOWS TTS SHIPS EQUIPMENT AS 5845 Bergen Telephone: +47 55 11 30 50 Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com Company brochures and datasheets are available on the Internet.
EXTERNAL SIDE DOORS External side doors Offshore vessels are often built to comply with specific customer demands and are therefore tailor-made. TTS Ships Equipment offers a variety of equipment configurations to help meet these needs. The purpose of an offshore ROV (Remote Operated Vehicle) side door is mainly to deploy and retrieve subsea vehicles. The door must be designed to withstand operation in heavy seas and rough weather. TTS Ships Equipment delivers a number of different door configurations, all designed for operational flexibility, reliability and watertightness. .Top hinged .Side hinged .Bottom hinged .Sliding .Roller gate .Railing door .External Door/platform HANGAR DOORS Hangar Doors Offshore vessels are often built to comply with specific customer demands. TTS Ships Equipment AS offers a variety of equipment configurations to help meet these needs. Offshore vessels often have an enclosed hangar for storage of equipment or for sheltering offshore operations. The rear deck is then accessed through a door in the aft end of the hangar. TTS Ships Equipment offers all kinds of door configurations: the most important design principles being compact construction, light weight and operation on a limited free space either on deck or in the hangar. A number of door types can be delivered either with outwards or inwards opening depending on the aft deck and hangar layouts.
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 291 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
292
VESTNES OCEAN AS 6901 Florø Telephone: +47 57 75 20 70 Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. DOORS TURN KEY SHIP INTERIOR: Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires. Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.
STRUCTURES & OUTFITTING DETAILS
133_304_CBS_2016.indd 292 07.08.2016 11:46:35
293
ACCOMMODATION EQUIPMENT
TANKS AND HEATING/COOLING EQUIPMENT
Boilers, burners and incinerators 294Cooling components for fluids 299Evaporators, condensers and receivers 300Heat exchangers & steam generation 301Preheaters 302Tank cleaning equipment 302Tanks 302Thermal compensators 303
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 293 07.08.2016 11:46:35
ACCOMMODATION EQUIPMENT
294
BOILERS, BURNERS AND INCINERATORSRelevant system groups:445, 481, 577, 58, 581, 61, 64, 641, 644, 646, 703, 841 AIR PRODUCTS AS 4689 Kristiansand Telephone: +47 38 03 99 00 Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. HYDROGEN RECOVERY SYSTEMS Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors. FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. OIL BURNERS Oil burners Separate control panels and accessories for oil burners. KONGSBERG EVOTEC 6080 Gurskøy Telephone: +47-94 94 10 00 OIL RECOVERY HANDLING SYSTEMS
PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. BOILERS Parat boilers. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our clients and customers can rely on being handed the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close. CENTRAL HEATING BOILERS Parat central heating boilers. DONKEY BOILERS Parat auxiliary boilers and exhaust boilers. ELECTRICAL CIRCULATION STEAM BOILERS ECS - ELECTRICAL CIRCULATION STEAM BOILERS
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 294 07.08.2016 11:46:35
295
ACCOMMODATION EQUIPMENT
The PARAT Electrical circulation steam boiler was designed to meet the request for a modular and easy to install alternative to MGO fuel for auxiliary boilers on existing vessels in operation. By integrating the ECS in your boiler you have the option to maintain your steam pressure from an electrical power source (shore power, spare generator power etc.). The unit can be installed on any kind of existing steam boiler system and is also a good solution for newbuilds where increased fuel flexibility for the steam system is required. The electrical cabinet is not directly connected to the boiler unit. This ensures a low temperature in the electrical components. The cabinet is standardized, and type approved according to the NEK 400. Included are fuses, contactors and complete safety system. As an option the unit can be delivered with a main power switch. The boiler unit is designed for vertical or horizontal installation depending on the layout and space availability around the main auxiliary boiler. Inlet and outlet connections to main boiler will be done on site. The ECS can be delivered as a standard modular unit in capacities up to 400kW, which is equivalent to 600kg steam per hour. Larger capacities can be provided upon request. ELECTRICAL STEAM BOILERS The Parat Electrical element boiler can be delivered with capacity up to 5000 kW. With our 40 years of experience in marine boilers PARAT has landed on a rugged design that fulfills all class requirements. The electrical element boiler is very compact, and one of the greatest advantages with this product is the possibility of low load regulation, down to 15 kW. No smoke stack is needed, thus saving space and costs. The electrical cabinet is not directly connected to the boiler. This ensures a low temperature in the electrical components. The cabinet is
standardized, and type approved according to NEK 400. Included in the cabinet is the main switch, fuses, contactors and a complete safety and control system. This system is based on a Siemens PLC SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible, via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system. For vessels with ORO operation class, Parat has developed a successful package containing a heat exchanger for the hot water system and steam lances for heating of the ORO tanks. The patended Parat MEL-C was developed to meet the demand for a compact and flexible system that allows the operator to use one boiler system for both steam and hot water production. In normal operation the boiler generates hot water at an operating temperature of 90oC. When there is a requirement for steam production the water level in the boiler is reduced to provide a sufficient steam separation area. Hot water production is maintained separately by an electric heater in a bypass circuit. The MEL-DC was developed to enable connection to direct current power supply. It is based on our standard MEL low Voltage boiler but with specialized immersion heaters and control panel. ELECTRO BOILERS Electrical boilers With decades of experience with various electrical steam and hot water boilers for land based industry PARAT is in a unique position to provide boilers for vessels with modern and often ground breaking propulsion and power generation systems. Zero emissions, small footprints and simple installation and operation make our electrical boilers the perfect solution for steam and heat
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 295 07.08.2016 11:46:36
ACCOMMODATION EQUIPMENT
296
generation aboard the futures most energy efficient vessels. The following pages give a brief introduction to our electrical boiler range. EXHAUST BOILERS Parat exhaust boilers for hot water and steam. Utilizing the waste heat from engines and generators is a good way to save fuel and space and at the same time reduce harmful emissions to the atmosphere . Parat specializes in custom designed boilers and economizers for any vessel and engine type with the focus on providing the user with the most compact and efficient solution available. Since the worlds first composite boiler left our factory in 1972, we have continued innovating and are able to supply any standard or custom made heat recovery solution for all kinds of engines or generators. The following pages give a brief overview of our products under the category exhaust gas boilers. EXHAUST GAS SMOKE TUBE BOILER The smoke tubes pass through the boiler and the exhaust gas flows inside the tubes. This construction makes the boiler suitable for connection to more than one engine with separate exhaust gas sections in one boiler. The boiler can either work with forced circulation with evaporation in a separate steam drum or as a natural circulating boiler with a built-in steam drum at the top. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boiler is pre-assembled and delivered as a complete unit.
EXHAUST GAS WATER TUBE BOILER The water tube boiler consists of finned tube or bare tube bundles mounted together in sections. The water circulates through the tubes and the extended heating surface on the exhaust gas side makes this boiler compact. The water flow is generated by circulation pumps and evaporation takes place in the boiler. The water/steam mixture is then separated in a steam drum or in an auxiliary boiler. The boiler can be controlled by a surpuls valve and a condenser, or by a three-way exhaust gas damper. The boilers are pre-assembled and delivered as a complete unit. Needs proper water treatment and cleaning. SMOKE TUBE / EXHAUST GAS BOILER The boiler is of vertical design with smoke tubes through the boiler and steam evaporation at the upper section. The boiler is constructed from drawings approved by all classification societies and delivered with equipment in accordance with class requirements. The combination of both an oil fired section and exhaust gas section in the same boiler leads to a simpler and more economical steam system on board. A two in one system is less expensive to install than two separate boilers. A combined system is easy to service and maintain, thus providing cost savings during the lifetime of the ship. Capacity of the exhaust gas section will depend on the exhaust gas quantity and temperature. The principle of the boiler is based on a common water and steam space and separate sections for oil firing and exhaust gas. If several engines are utilized, the boiler can be delivered with several separate exhaust gas sections. The boiler comprises smoke tubes both for the oil fired and the exhaust gas section. From the top of the boiler there is good access to the tubes which make service and maintenance easy.
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 296 07.08.2016 11:46:36
297
ACCOMMODATION EQUIPMENT
A main feature of the boiler is its automatic mode. When this mode is activated, the exhaust gas section becomes the main heating source. If the capacity is too small and the steam pressure drops, the oil burner automatically ensures correct pressure. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. Operation of the boiler control panel is done from the local touch screen. Boiler PLC can be connected to the main control system by standard ethernet/profibus/modbus communication. HIGH VOLTAGE ELECTRODE BOILERS PARAT MEH High voltage electrode boilers The PARAT High Voltage electrode boiler can be delivered with a capacity up to 50 MW. With 40 years of experience in marine boilers we have developed a rugged design that fulfills all class requirements. The new electrode system for marine use, is a result of many years of experience combined with an innovative design. The high voltage electrode boiler is extremely compact. The cost savings on ships is significant, since no transformer or low voltage cables are needed, thus reducing both installation costs, space requirements and maintenance. The electrical control panel includes a complete safety and control system. This system is based on a Siemens SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system. HOT WATER BOILERS MVH Vertikal Hot Water Boiler
The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication. MAIN BOILERS Parat steam boilers. Capacity 500 - 25.000 kg/h. Parat Halvorsen has been family-run since day one, and acting like it ever since. To this day, we remain a tightly knitted company. Our employees are all hand picked for their individual expertise and personalities, and they’re all fully dedicated to their job, their craft and customer needs. We’re proud to employ a highly qualified staff of engineers, service personnel, construction workers and managers who really love what they do. The mix of professional approach and personal dedication not only results in high quality deliveries, but also ensures that our clients and customers can rely on being handed
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 297 07.08.2016 11:46:36
ACCOMMODATION EQUIPMENT
298
the best product on the market. A human touch makes all the difference in an otherwise fast-paced global market. We like to keep it personal. Some say nothing beats experience. That’s partly true. At Parat Halvorsen we put our hearts in the mix, and nothing comes close. STEAM BOILERS Parat steam boilers. Capacity 750 - 25.000 kg/h. Parat oilfired steam boilers, exhaustì gas boilers or combined exhaust gas/oilfired steam boilers TOP FIRED WATER TUBE BOILERS PARAT MKS Marine Top Fired Water Tube Boiler The PARAT top fired water tube boiler is a fully automatic steam boiler.A sufficiently dimensioned steam drum makes the boiler suitable for evaporating steam from additional external exhaust gas boilers. The design and performance is a result of solid experience and high technical standards. The boiler is supplied with a circular furnace, constructed from membrane walls and convection sections with a combination of bare tubes and pin tubes. The heat flows cross sectional with a high flue gas velocity. With this unique design, both improved performance and reduced maintenance is achieved. The boiler fulfills the most stringent equipment standards and is available with certificates from all major class societies. Fittings and equipment are in accordance with class requirements. Our main equipment manufacturers supply high standard products. The steam atomizing burner can be supplied for oil, gas or dual fuel. The control system is designed to enable an unmanned engine room. The system is fully automatic and operates with electronic and electric/pneumatic actuators. All operation from the boiler control panel is done from the local touch screen. Boiler PLC can be connected to
the main control room with standard ethernet/profibus/modbus communication. Maintenance and inspections can be carried out through large inspection doors. An automatic steam cleaning system is installed between the tube sections. The boiler is preassembled and delivered as complete unit incl. insulation and fittings. VERTICAL PIN-TUBE BOILERS PARAT MPW Marine Vertical Pin-Tube Boiler The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area. The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel. The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance. The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 298 07.08.2016 11:46:36
299
ACCOMMODATION EQUIPMENT
TEAMTEC A/S 4902 Tvedestrand Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no Company brochures and datasheets are available on the Internet. INCINERATORS Incinerator E-mail: [email protected] Phone: +47 37 19 98 00 Spare Parts E-mail: [email protected] Phone: +47 37 19 98 00 Service E-mail: [email protected] Phone: +47 37 19 98 00 TeamTec Incinerators - safe and efficient waste management: TeamTec AS is a leading manufacturer of incinerators, with more than 11,000 units sold worldwide since 1972. The TeamTec Incinerators provide safe and efficient waste management, which complies with the IMO regulations for both waste oil and solid waste incineration. TeamTec supplies a wide range of incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts. TeamTec Bilge water injection solutions: TeamTec water injection system for the TeamTec Incinerators is an efficient and automated disposal system for contaminated water. The system reduces operating issues related to OWS, increase sludge burning capacity and reduce NOX emissions. Older incinerator models can easily be upgraded with TeamTec’s certified water injection upgrading kit. TeamTec After Sales - worldwide service and spare parts: TeamTec provides comprehensive after sales service for all TeamTec products worldwide: spare parts, commissioning, repair service, pre-installation survey, service agreements, training and general technical support.
COOLING COMPONENTS FOR FLUIDSRelevant system groups:355, 362, 554, 584, 7, 70, 71, 722 ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. COOLING WATER TREATMENT Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 299 07.08.2016 11:46:36
ACCOMMODATION EQUIPMENT
300
SPERRE INDUSTRI AS 6057 Ellingsøy Telephone: +47 70 16 11 00 COOLERS
EVAPORATORS, CONDENSERS AND RECEIVERSRelevant system groups:355, 37, 58, 611, 64, 761, 794 ALFSEN OG GUNDERSON AS 0601 Oslo Telephone: +47-22 70 77 00 Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. TANK DRYING Tank drying equipment for chemical tankers. Cargo hold dehumidifiers AG Air Dryer for blasting and painting. Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2 MESON AS 3113 Tønsberg Telephone: +47 33 32 49 00 Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet.
STEAM TRAPS Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. - Bottom Drain Valve - Stop Valve - JIS Valves - STeam Trap - Quick Closing Valves - Self Closing Valve - Vacuum Valve - Control Valve - Gland Cock - Mud Box - Safety Valve - Strainer - Fire Valve - Knife Gate Valve - Changeover Valve - Needle Valve - Ball Valve - Butterfly Valve - Check Valve - Gate Valve - Diaphragm Valve - Storm Flap Valve TEKNOTHERM MARINE A/S 1751 Halden Telephone: +47-69 19 09 00 Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet.
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 300 07.08.2016 11:46:36
301
ACCOMMODATION EQUIPMENT
CONDENSERS Large assortment in refrigeration condensers Service.
HEAT EXCHANGERS & STEAM GENERATIONRelevant system groups:36, 577, 581, 64, 647, 648, 649, 7, 72, 74, 794, 89, 897 DAHL AS, BRØDRENE 0602 Oslo Telephone: +47-22 72 55 00 Telefax: +47 22 65 87 65 WATER HEATERS ENWA WATER TECHNOLOGY AS 4001 Stavanger Telephone: +47-51 63 43 00 Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Company brochures and datasheets are available on the Internet. HEATING PLANTS Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
PARAT HALVORSEN A-S 4402 Flekkefjord Telephone: +47-99 48 55 00 Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. FEEDWATERTANK / DEGASSER Parat IMR/IMT Feedwatertank / Degasser HEAT RECOVERY UNITS Parat heat recovery units. STEAM GENERATORS Parat steam generators from 200 - 4.000 kg/h. THERMAL OIL HEATERS Parat thermal oil heaters. Output up to 7 MW. PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com PLATE HEAT EXCHANGERS Sondex, Denmark Plate heat exchangers. PLATE HEAT EXCHANGERS PHE Gasketed Plate Design By means of technological innovation SONDEX has developed and designed a new generation of plate heat exchangers.
PREHEATERS Relevant system groups:70, 703, 71 FREMO AS 3291 Stavern Telephone: +47 33 19 65 00 Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. OIL PREHEATERS Oil pre-heaters
TANK CLEANING EQUIPMENTRelevant system groups:382, 444 PG FLOW SOLUTIONS AS 1378 Nesbru Telephone: +47-66 77 56 00 Telefax: +47-66 77 56 01 e-mail: [email protected] Internet: www.pg-marinegroup.com TANK CLEANING MACHINES SC 15 TW Fixed
SC 15 TW Portable tankcleaning systems specially developed for: Crude oill carriers Offshore Supply Vessels OBO carriers Product carriers Industrial applications Chemical carriers Bulk carriers Models SC 15 TW is media driven tankcleaning machines of twin nozzle type. SC 15 TW can be used either as portable machines on flexible hoses or as fixed submerged mounted machines. The machines can also be fixed installed on a extension pipe through the main deck. ULMATEC PYRO AS 6280 Søvik Telephone: +47 70 20 98 70 Telefax: +47 70 20 98 90 TANK HEATING SYSTEMS
TANK HEATING SOLUTIONS Tank Heating Solutions for Oil Spill Response Vessels Oil spill incidents are unplanned and unwanted events that can have dire consequences for the environment and fragile ecosystems around the globe. Fast response combined with the correct equipment able to cope with any type of hydrocarbon emulsion is vital to minimize the risk involved in extracting, processing and transporting petrochemicals outside our coastlines. Parat Halvorsen, in close cooperation with yards and ship owners, has developed a system that strengthens one vital part of the response value-chain in a very cost efficient way. A heating system that is fully integrated into the response vessels utility and heat recovery loop - and that in moments can be re-mobilized to deliver steam through specially engineered injection nozzles into the tanks that carry recovered hydrocarbons.
THERMAL COMPENSATORSRelevant system groups:601, 641, 651, 74, 743
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 303 07.08.2016 11:46:36
ACCOMMODATION EQUIPMENT
304
TANKS AND HEATING/COOLING EQUIPMENT
133_304_CBS_2016.indd 304 07.08.2016 11:46:36
305
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133 INDEX TO THE SFI-SYSTEM GROUPS Numeric
Then products are also associated with relevant functions or systems according to the well-known SFI system, a group system widely used within the maritime sector.
For instance, products that earlier would belong to the group “deck cranes” will now be classified as component group “Cranes, crane equipment, etc” and then among the system group “Deck cranes for cargo” (SFI 33). This means that the product in the online version will be shown when searching for cranes in general, and at the same time searching for cargo handling equipment.
305-372_SFI_216.indd 305 07.08.2016 11:46:52
306
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
1 - SHIP GENERALBridge inventory & equipment Control & automation systems Project management, construction management
101 - CONTRACT/SPECIFIC. WORK, GENERAL DESIGN, MODEL TESTINGConstruction/fabrication software Engineering software (CAD, analysis) Maintenance, spare parts and supplies Other construction assistance (cleaning, rigging, stores, support)
102 - DRAWING, ORDERING ETC. WITH REGARD TO HULLAluminium
103 - DRAWING, ORDERING ETC. W.R.T. EQUIPMENT FOR CARGO
104 - DRAWING, ORDERING ETC. W.R.T. SHIP EQUIPMENT
105 - DRAWING, ORDERING W.R.T. EQUIPMENT FOR CREW, PASSENGERS
106 - DRAWING, ORDERING W.R.T. MACH. COMPONENTS, MACH/SHIP SYSTEMS
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
137 - PROV. GAS, OXYGE, COMPRESSED AIR PLANTS
138 - TARPAULIN RENTALS
139 - PROV. LIFTING, TRANSPORT EQUIPMENT
14 - WORK ON WAYS, LAUNCHING, DOCKINGAlarm equipment Basic design & project development services Control & automation systems Engineering services Monitoring equipment Positioning & navigation equipment Project management, construction management
141 - KEEL BLOCKS, PILLARS, CUSHIONS
142 - LAUNCHING ARR. W/CRADLE, SUPPORTS, WATER FILLING, PLATFORM
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
194 - BINDING AND MENDING MATERIAL, CLEANING ARTICLESOther materials
196 - MISCELLANEOUS CONSUMPTION ARTICLESAdditives & agents Aluminium Bearings Brackets, bolts, fasteners and locking devices Chemicals Cleaning equipment Consumables Detection & identification equipment Fire protection & detection equipment Generators, alternators & dynamos Gratings & drains GRP/FRP Hoses, drums, packings & fittings Lifesaving equipment Machinery and piping work Other air/gas/pneumatic equipment Other engine & propulsion equipment Other inventory Other materials Personal equipment Pipes & pipe units Stainless steel Steel Subsea & seismic equipment Workshop equipment
305-372_SFI_216.indd 311 07.08.2016 11:46:52
312
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
2 - HULLSteel Structural work and surface treatment (plate, welder, paint)
20 - HULL MATERIALS, GENERAL HULL WORKAlarm equipment Basic design & project development services Control & automation systems Engineering services Monitoring equipment Positioning & navigation equipment Project management, construction management
201 - HULL MATERIALSAluminium Sections, foundations, pillars, structural units and bulkheads
202 - TRANSPORTATION, SORTING AND STORAGE OF HULL MATERIALSMachinery and piping work Propellers & impellers
203 - BLASTING, SHOP-PRIMING, ROLLING AND CLEANING OF MATERIALSCleaning equipment Other construction assistance (cleaning, rigging, stores, support) Structural work and surface treatment (plate, welder, paint)
204 - TESTING OF TANKS, BULKHEADS
205 - X-RAY AND ULTRASONIC TESTING OF HULL PARTS
206 - TEMPLATE AND MOULD LOFT WORK
207 - JOINING OF HULL PARTS AFLOAT
21 - AFTERBODY
211 - HULL SECTIONS AND PANELS, AFTERBODY
22 - ENGINE AREA221 - HULL SECTIONS AND PANELS, ENGINE AREA
305-372_SFI_216.indd 312 07.08.2016 11:46:52
313
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
23 - CARGO AREA - HULL SMALL VESSELSTanks
231 - HULL SECTIONS AND PANELS, CARGO AREA
24 - FOREBODY
241 - HULL SECTIONS AND PANELS, FOREBODY
25 - DECK HOUSES AND SUPERSTRUCTURESAluminium
251 - DECK HOUSES
252 - MAST, PUMP, FAN AND WINCH HOUSES, COMPANION WAYS
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
308 - CARGO DOORS IN BULKHEADS
309 - COMMON HYDRAULIC OIL SYSTEM FOR HATCHES/PORTSAggregates Air & gas valves Air filters & spark arresters Fluid filters Fluid valves & other armatures Hydraulic motors & actuators Hydraulic plants & equipment Maintenance, spare parts and supplies Pumps & pump units Regulators & switches
31 - EQUIPMENT FOR CARGO IN HOLDS/ON DECK
311 - LOOSE DECKS AND PLATFORMS FOR CARGO, RAMPSHatches, covers, ports, ramps & platforms
35 - LOADING/DISCHARGING SYSTEMS FOR LIQUID CARGOAir & gas valves Anti-pollution equipment Control & automation systems Drilling equipment Fluid valves & other armatures Meters & indicators Monitoring equipment Other air/gas/pneumatic equipment Sensors, gauges & detectors
351 - LOADING/DISCHARGING PUMPSMeters & indicators Turbines & waterjet units
305-372_SFI_216.indd 319 07.08.2016 11:46:52
320
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
352 - LOADING/DISCHARGING SYSTEMS ON DECKOther engine & propulsion equipment
353 - LOADING/DISCHARGING SYSTEMS IN PUMP ROOMSPumps & pump units Subsea & seismic equipment
354 - LOADING/DISCHARGING SYSTEMS IN CARGO TANKSAir & gas valves Fluid valves & other armatures Pumps & pump units Subsea & seismic equipment
355 - LOADING/DISCHARGING SYSTEMS FOR LPG/LNG IN GASEOUS PHASEAir and gas treatment (dehydrators, air separators) Cooling components for fluids Evaporators, condensers and receivers Purification plants & fluid treatment
356 - SEPARATE STRIPPING SYSTEMSEjectors Maintenance, spare parts and supplies Pumps & pump units
357 - MUD SYSTEMS W/PUMPS, PIPING
36 - FREEZING, REFRIGERATING, HEATING SYSTEMS FOR CARGOHeat exchangers & steam generation Pumps & pump units
361 - INSULATION AND SHEATHING OF CARGO HOLDS/TANKS
362 - FREEZING AND REFRIGERATING SYSTEMS FOR DRY CARGOAC units, air dryers, air cooling and heating components Bins, baskets, boxes and containers Compressors Cooling components for fluids Galley, pantry equipment and whiteware
363 - DIRECT COOLING SYSTEMS FOR LIQUID CARGO
364 - CASCADE COOLING SYSTEMS FOR LIQUID CARGOCompressors
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
37 - GAS/VENTILATION SYSTEMS FOR CARGO HOLDS/TANKSAC units, air dryers, air cooling and heating components Air & gas valves Air and gas treatment (dehydrators, air separators) Air filters & spark arresters Evaporators, condensers and receivers Fans Fluid valves & other armatures
371 - VENTILATION SYSTEMS FOR REFRIGERATED CARGO HOLDS
372 - CLOSED VENTILATION/RETURN VAPOUR SYSTEMS FOR CARGO HOLDS
373 - OPEN VENTILATION SYSTEMS FOR CARGO HOLDS
374 - VENT./GAS FREEING SYSTEMS FOR TANKS, WIND SAILS W/EQUIPMENTCargo handling equipment Fans Fire protection & detection equipment Hatches, covers, ports, ramps & platforms Inert gas components, CO2
375 - BLOW-OFF SYST. FROM SAFETY VALVES (PRESSURE/VACUUM VALVES)Air & gas valves Control & automation systems Drilling equipment Fluid valves & other armatures Inspection and testing (NDT, pressure, performance, trial trip, etc)
376 - INERT GAS SYSTEMS W/CONDITIONING PLANTCargo handling equipment Fire protection & detection equipment Firefighting equipment Generators, alternators & dynamos Inert gas components, CO2 Other air/gas/pneumatic equipment
38 - AUXILIARY SYSTEMS, EQUIPMENT FOR CARGOMonitoring equipment
381 - SOUNDING, SURVEIL. AND OPERATING EQUIPMENT FOR CARGO SYSTEMSAggregates
305-372_SFI_216.indd 321 07.08.2016 11:46:52
322
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
Alarm equipment Basic design & project development services Capstans, bollards & hawse holes Centrals, consoles & panels Combustion engine Computer hardware Construction/fabrication software Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical motors & starters Engineering services Engineering software (CAD, analysis) Fire protection & detection equipment Gears Generators, alternators & dynamos Hydraulic motors & actuators Meters & indicators Monitoring equipment Onboard software Other air/gas/pneumatic equipment Other communication equipment Other engine & propulsion equipment Pneumatic actuators Positioning & navigation equipment Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays Winches, drums & reels
382 - TANK CLEANING SYSTEMS AND EQUIPMENTAnti-pollution equipment Cranes, crane equipment, lifting devices & booms Detection & identification equipment GRP/FRP Purification plants & fluid treatment Separators & traps Signal cables & connectors
305-372_SFI_216.indd 322 07.08.2016 11:46:52
323
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
383 - LIFTING GEAR FOR CARGO HOSES
384 - SEPARATE COOLING WATER SYSTEMS FOR CARGO EQUIPMENT
385 - INSULATION DRYING SYSTEM FOR CARGO HOLDS/TANKS
386 - EQUIPM. F. ADDITION OF PRESERVATIVES, INHIBITORS, SPIRITS
387 - SPECIAL STRUCTURES FOR LOADING/DISCHARGING OVER STERN/STEM
305-372_SFI_216.indd 323 07.08.2016 11:46:52
324
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
41 - NAVIGATION, SEARCHING EQUIPMENTAlarm equipment Basic design & project development services Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Engineering services Meters & indicators Monitoring equipment Other electrical/electro equipment Positioning & navigation equipment Project management, construction management Radio & telephone communication
411 - RADAR PLANTSAntennas & transmitters Davits and masts
305-372_SFI_216.indd 325 07.08.2016 11:46:52
326
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
42 - COMMUNICATION EQUIPMENTAccumulators, condensers, chargers & batteries Alarm equipment Basic design & project development services Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Detection & identification equipment Electrical and electro work Engineering services Monitoring equipment Onboard software Other communication equipment Other electrical/electro equipment Positioning & navigation equipment Project management, construction management Radio & telephone communication
421 - RADIO PLANT, GMDSSAntennas & transmitters Chains, wires & ropes Detection & identification equipment Firefighting equipment Radio & telephone communication Safety equipment Workshop equipment
422 - LIFEBOAT RADIO TRANSMITTERS, EPIRBSAntennas & transmitters Lifesaving equipment Radio & telephone communication Safety equipment
423 - DATA TRANSMISSION PLANTS, COMMUNICATIONAntennas & transmitters Electrical and electro work Monitoring equipment Other communication equipment Power cables Radio & telephone communication Safety equipment Signal cables & connectors Workshop equipment
305-372_SFI_216.indd 327 07.08.2016 11:46:52
328
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
424 - VHF/UHF TELEPHONESAntennas & transmitters Centrals, consoles & panels Radio & telephone communication Workshop equipment
425 - CALLING/COMMAND/CREW CALL TELEPHONE PLANTS, WALKIE-TALKIESAlarm equipment Detection & identification equipment Fire protection & detection equipment Other communication equipment Radio & telephone communication
426 - SPEAKING TUBES, TUBE POST PLANTSDetection & identification equipment
427 - LIGHT AND SIGNAL EQUIPMENT, LANTERNS, TYPHONSCentrals, consoles & panels Detection & identification equipment Lighting equipment & armatures Other nautical equipment
445 - GARBAGE DISPOSAL PLANTS, INCINERATORSAir and gas treatment (dehydrators, air separators) Boilers, burners and incinerators Maintenance, spare parts and supplies Purification plants & fluid treatment Sanitary & waste equipment Structural work and surface treatment (plate, welder, paint)
446 - OUTFITTING IN STORE ROOMS AND WORKSHOPSFurniture & cabinets Other inventory Workshop equipment
447 - CLAMPS/FOUNDATIONS FOR SPARE PARTSConnectors, sockets, plugs & distribution boxes
448 - NAME PLATES/MARKING ON MACHINERY, EQUIPM., PIPES, CABLESLighting equipment & armatures Other inventory Safety equipment
45 - LIFTING, TRANSPORT EQUIPMENT FOR MACHINERY COMPONENTSCranes, crane equipment, lifting devices & booms Other construction assistance (cleaning, rigging, stores, support)
451 - ENGINE ROOM LIFTS
452 - TRAVELLING CRANES AND LIFTING GEAR IN ENGINE ROOM
453 - EXTERNAL LIFTING GEAR FOR MACHINERY COMPONENTS
305-372_SFI_216.indd 331 07.08.2016 11:46:52
332
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
512 - DOORS W/COAMINGS IN ACCOMMODATIONAccommodation modules Interior doors & windows Watertight/weathertight doors & windows
513 - OTHER INTERNAL DOORS W/COAMINGSAccommodation modules Air & gas valves Fluid valves & other armatures Interior doors & windows Pumps & pump units Watertight/weathertight doors & windows
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
Interior doors & windows Watertight/weathertight doors & windows
515 - SIDE SCUTTLES AND WINDOWS W/EQUIPMENTBridge inventory & equipment Fire protection & detection equipment Interior doors & windows Watertight/weathertight doors & windows
554 - FREEZING/REFRIGERATING SYSTEMS FOR PROVISIONSAC units, air dryers, air cooling and heating components Compressors Cooling components for fluids Galley, pantry equipment and whiteware Meters & indicators Sensors, gauges & detectors
555 - INSULATION, LINING AND BATTENING IN PROV. ROOMS, DOORS AND PORTS
556 - WALLS, BINS, SHELVES, RACKS, GRATING AND INVENT. IN PROV.ROOMSFurniture & cabinets Stainless steel
557 - INSULATION DRYING SYSTEMS FOR PROVISION ROOMS
558 - LAUNDRY, IRONING AND DRYING EQUIPMENTAir and gas treatment (dehydrators, air separators) Cleaning equipment Furniture & cabinets Galley, pantry equipment and whiteware
56 - TRANSPORT EQUIPMENT FOR CREW, PASSENGERS, PROVISIONS
57 - VENTILATION, AIR-CONDITIONING, HEATING SYSTEMSAC units, air dryers, air cooling and heating components Air & gas valves Air and gas treatment (dehydrators, air separators) Air filters & spark arresters Electrical heating Fans Fire protection & detection equipment Firefighting equipment Fluid filters Fluid valves & other armatures Other air/gas/pneumatic equipment Pumps & pump units Purification plants & fluid treatment Watertight/weathertight doors & windows
571 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR ACCOMMODATION
572 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR PROVISION ROOMS
573 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR CONTROL ROOMS
574 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR BOILER/ENG. ROOMS
575 - VENTILATION/AIR-CONDITIONING SYSTEMS FOR PUMP ROOMSAC units, air dryers, air cooling and heating components Fans
576 - VENTILATION/AIR-COND. SYSTEMS FOR STEERING GEAR COMPARTMENTS
577 - CENTRAL HEATING SYSTEMS W/RADIATORSBoilers, burners and incinerators Heat exchangers & steam generation
305-372_SFI_216.indd 341 07.08.2016 11:46:53
342
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
58 - SANITARY SYST. W/DISCHARGES, ACCOMMODATION DRAIN SYSTEMSBoilers, burners and incinerators Evaporators, condensers and receivers Fluid valves & other armatures Machinery and piping work Purification plants & fluid treatment Sanitary & waste equipment Sections, foundations, pillars, structural units and bulkheads
64 - BOILERS, STEAM, GAS GENERATORSBoilers, burners and incinerators Control & automation systems Evaporators, condensers and receivers Fire protection & detection equipment
305-372_SFI_216.indd 348 07.08.2016 11:46:53
349
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
Galley, pantry equipment and whiteware Heat exchangers & steam generation Inspections & testing equipment Machinery and piping work Pipes & pipe units Pumps & pump units Purification plants & fluid treatment Sensors, gauges & detectors
641 - MAIN BOILERSBoilers, burners and incinerators Exhaust components & silencers Tanks
644 - AUXILIARY BOILERSBoilers, burners and incinerators
646 - EXHAUST GAS BOILERSAir filters & spark arresters Boilers, burners and incinerators Fluid filters
713 - LUBE OIL SYSTEMS FOR PROPULSION MACHINERY AND TRANSMISSIONS
714 - LUBE OIL SYSTEMS FOR MOTOR/TURBO AGGREGATES
715 - L.O. SYST. FOR GAS GEN., COMMON L.O. SYST. FOR OTHER MACH.
305-372_SFI_216.indd 353 07.08.2016 11:46:53
354
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
72 - COOLING SYSTEMSAir & gas valves Fluid valves & other armatures GRP/FRP Heat exchangers & steam generation Meters & indicators Pipes & pipe units Sensors, gauges & detectors
721 - SEA WATER COOLING SYSTEMSPipes & pipe units Pumps & pump units
722 - FRESH WATER AND OTHER COOLING SYSTEMSCooling components for fluids Pipes & pipe units Purification plants & fluid treatment
73 - COMPRESSED AIR SYSTEMSAC units, air dryers, air cooling and heating components Air & gas valves Air filters & spark arresters Compressors Fluid filters Fluid valves & other armatures Other air/gas/pneumatic equipment Separators & traps Tanks
731 - STARTING AIR SYSTEMS (HIGH PRESSURE)Compressors Tanks
732 - GENERAL PURPOSE AIR SYSTEMS FOR ENGINE ROOM (LOW PRESSURE)Tanks
733 - GENERAL PURPOSE AIR SYSTEMS FOR DECK (LOW PRESSURE)
734 - INSTRUMENT AIR SUPPLY SYSTEMSAC units, air dryers, air cooling and heating components Air and gas treatment (dehydrators, air separators) Other air/gas/pneumatic equipment Tanks
305-372_SFI_216.indd 354 07.08.2016 11:46:53
355
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
74 - EXHAUST SYSTEMS, AIR INTAKESConverters (voltage, frequency), receivers, el. dampers and rectifiers Exhaust components & silencers Heat exchangers & steam generation
741 - FRESH AIR INTAKES (NOT VENTILATION)
743 - EXHAUST GAS SYSTEMS FOR PROPULSION MACHINERYAir filters & spark arresters Brackets, bolts, fasteners and locking devices Exhaust components & silencers Fluid filters
744 - EXHAUST GAS SYSTEMS FOR MOTOR AGGREGATESAir filters & spark arresters Exhaust components & silencers Fluid filters
745 - EXHAUST GAS SYSTEMS FOR BOILERSAir filters & spark arresters Exhaust components & silencers Fluid filters
748 - ASH/SLAG HANDLING SYSTEMS
75 - STEAM, CONDENSATE, FEED WATER SYSTEMSAir & gas valves Air and gas treatment (dehydrators, air separators) Fluid valves & other armatures Pipes & pipe units Pumps & pump units
751 - PRIMARY FULL PRESSURE STEAM SYSTEMS
752 - PRIMARY REDUCED PRESSURE STEAM SYSTEMS IN ENGINE ROOM
753 - PRIMARY REDUCED PRESSURE SYSTEMS OUTSIDE ENGINE ROOM
754 - PRIM. DRAIN, BLOW-OFF, EXH. STEAM AND DEAERATION SYST. IN E/R
755 - PRIMARY CONDENSATE SYSTEMS
756 - PRIMARY FEED WATER SYSTEMS
305-372_SFI_216.indd 355 07.08.2016 11:46:53
356
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
757 - SECONDARY STEAM SYSTEMS IN ENGINE ROOM
758 - SECONDARY STEAM SYSTEMS OUTSIDE ENGINE ROOM
759 - SECONDARY CONDENSATE AND FEED WATER SYSTEMS
76 - DISTILLED, MAKE-UP WATER SYSTEMSPumps & pump units
761 - DISTILLED AND MAKE-UP WATER SYSTEMSEvaporators, condensers and receivers Fluid filters Freshwater generation Meters & indicators Pumps & pump units Purification plants & fluid treatment Sensors, gauges & detectors
79 - AUTOMATION SYSTEMS FOR MACHINERYAggregates Air & gas valves Air nozzles, jealousies and batteries Alarm equipment Basic design & project development services Capstans, bollards & hawse holes Centrals, consoles & panels Combustion engine Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers Electrical and electro work Electrical motors & starters Engineering services Fire protection & detection equipment Fluid valves & other armatures Gears Generators, alternators & dynamos Hatches, covers, ports, ramps & platforms Hydraulic motors & actuators Meters & indicators Monitoring equipment Onboard software Other communication equipment Other electrical/electro equipment
305-372_SFI_216.indd 356 07.08.2016 11:46:53
357
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
796 - AUTOMATION EQUIPMENT FOR NUCLEAR REACTOR PLANTS
797 - AUTOMATION EQUIPMENT FOR OTHER MACHINERY COMPONENTSAlarm equipment Control & automation systems Fire protection & detection equipment Meters & indicators Monitoring equipment Other materials Sensors, gauges & detectors
798 - CABLES/LEADS AND PIPING FOR AUTOMATION SYSTEMS FOR MACHINERYAnchor, pipe & cable handling equipment
305-372_SFI_216.indd 359 07.08.2016 11:46:53
360
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
8 - SHIP COMMON SYSTEMSBrakes, couplings & shafts Cargo handling equipment Inspection and testing (NDT, pressure, performance, trial trip, etc) Machinery and piping work Maintenance, spare parts and supplies Other nautical equipment Sensors, gauges & detectors Vibration absorbers & dampeners
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
Pipes & pipe units Steel Subsea & seismic equipment
81 - FIRE, LIFEBOAT ALARM, FIRE FIGHTING AND WASH DOWN SYSTEMSAccumulators, condensers, chargers & batteries Additives & agents Firefighting equipment GRP/FRP Hoses, drums, packings & fittings Pipes & pipe units Subsea & seismic equipment
811 - FIRE DETECTION, FIRE AND LIFEBOAT ALARM SYSTEMSAlarm equipment Centrals, consoles & panels Control & automation systems Electrical and electro work Fire protection & detection equipment Other communication equipment Sensors, gauges & detectors
88 - ELECTRIC CABLE INSTALLATIONAlarm equipment Anchor, pipe & cable handling equipment Basic design & project development services Chains, wires & ropes Connectors, sockets, plugs & distribution boxes Control & automation systems Ducts, channels, trays and pipe support Electrical and electro work Electrical heating Engineering services Hoses, drums, packings & fittings Monitoring equipment Other electrical/electro equipment Positioning & navigation equipment Power cables Project management, construction management Signal cables & connectors Winches, drums & reels
881 - CABLE TRAYS AND INSTALLATION IN ENGINE AND BOILER ROOMS
882 - CABLE TRAYS W/INSTALLATION IN ACCOMMODATION
883 - CABLE TRAYS AND INSTALLATION ON DECK AND IN CARGO HOLDS
886 - SPECIAL CABLES
89 - ELECTRIC CONSUMER SYSTEMSAC units, air dryers, air cooling and heating components Aggregates Alarm equipment Centrals, consoles & panels Combustion engine Connectors, sockets, plugs & distribution boxes Consumables Control & automation systems Converters (voltage, frequency), receivers, el. dampers and rectifiers
305-372_SFI_216.indd 367 07.08.2016 11:46:54
368
SFI-SYSTEM GROUPS with Cross-references to Product Categories - page 133
Electrical and electro work Electrical motors & starters Engineering services Fans Fluid valves & other armatures Gears Generators, alternators & dynamos Heat exchangers & steam generation Lighting equipment & armatures Meters & indicators Monitoring equipment Other electrical/electro equipment Other materials Project management, construction management Propellers & impellers Regulators & switches Sensors, gauges & detectors Switchboards & relays
891 - ELECTRIC LIGHTING SYSTEMS FOR ENGINE AND BOILER ROOMLighting equipment & armatures Safety equipment
892 - ELECTRIC LIGHTING SYSTEMS FOR ACCOMMODATIONLighting equipment & armatures Other inventory Safety equipment
893 - ELECTRIC LIGHTING SYSTEMS FOR DECK AND CARGO HOLDSLighting equipment & armatures Other nautical equipment
Company reg.no: 937775741 Nulandsvika 8, 4400 Flekkefjord, NORWAY Telephone: +47 38 32 78 00. Telefax: +47 38 32 78 01 e-mail: [email protected] Internet: www.aeron.no Company brochures and datasheets are available on the Internet. Established: 1979 AF Offshore AeronMollier AS is a total contractor of Heating, Ventilation and Air-Conditioning (HVAC) systems for the global shipping and offshore industry. Our long history has given us a reputation of being a competitive, flexible, high-competent supplier as well as a reliable partner. AF Offshore AeronMollier AS - an AF Group company AF Gruppen ASA is a listed contracting and industrial group. Our core business areas comprise Property, Building, Civil Engineering, Environment, Energy and Offshore Aeron is a part of the offshore division in AF Group. Since its formation, AF has been an independent company, proud of its own strength and ability to perform complex tasks. The entrepreneurial spirit at AF has been characterized by the ability and will to think differently and find better, more future-oriented ways in which to generate value. “Addressing Future” AERON MARINE HVAC systems are designed to ensure optimal climate solutions for people, cargo, machinery and instruments onboard all types of ships. We want to be involved in all stages of the building process, as well as during the lifespan of installed systems. The Feeling Of Fresh Air It is a known fact how important a well dimensioned HVAC system is for the indoor environment onboard a ship. Fresh air is vital to both personnel and machinery. Feeling good improves productivity. With an optimised AERON HVAC system installed - you are sure to get - “the feeling of fresh air.” We have always worked closely with our customers in the marine environment, learning their needs and meeting their special requirements. The experience gained has been incorporated into our products and made Aeron a highly competent supplier of marine HVAC systems. Our skilled staff will ensure that our plants perform in accordance to our customer’s expectations. AF Offshore AeronMollier AS will be at your service at any time with a professional staff ready to analyse and solve any problem. In conjunction with our world wide representatives and business partners, we satisfy the customer’s needs on a short BRANCH OFFICES: Department Bergen: Sjøkrigsskoleveien 15, N-5163 Laksevåg Phone: +47 55 38 80 80 Department Sandnes: Forusbeen 210, N-4313 Sandnes Phone: +47 51 96 26 00
373_470_LF_2016.indd 374 07.08.2016 11:47:08
375
DIRECTORY OF SUPPLIERS SUBSIDIARY Aeron Energy Technology Co Ltd Flat 7, 530 Huicheng Road, Huinan County, Pudong District, 201300 Shanghai P.R. China Phone: +86 21 52282590 Telefax: +86 21 52286173 E-mail: [email protected] See index of Products and Services:
AIR HANDLING UNITS - AC units, air dryers, air cooling and heating components System groups: 316,362,57
DAMPERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 109
ANTENNA COOLING UNITS - Antennas & transmitters System groups: 411
FANS - Fans System groups: 57
AUTOMATION SYSTEMS - Control & automation systems System groups: 109
HVAC - Accommodation work (including carpentry, HVAC) System groups: 57
AXIAL FANS - Fans System groups: 57
REFRIGERATION PLANTS - AC units, air dryers, air cooling and heating components System groups: 57
CABIN UNITS - AC units, air dryers, air cooling and heating components System groups: 57
SEPARATORS & COWLS - Separators & traps System groups: 73,803
CENTRIFUGAL FANS - Fans System groups: 57
SILENCERS - Exhaust components & silencers System groups: 109
CONTAINERS - Bins, baskets, boxes and containers System groups: 317
SPIRO PIPES - Pipes & pipe units System groups: 196
CONTROL SYSTEMS - Control & automation systems System groups: 109
WEATHER LOUVERS - Watertight/weathertight doors & windows System groups: 304,57
373_470_LF_2016.indd 375 07.08.2016 11:47:08
DIRECTORY OF SUPPLIERS
376
The Supplier is represented in the following countries:
BRAZIL CHILE CHINA CROATIA HONG KONG KOREA, SOUTH
ROMANIA SINGAPORE SPAIN TURKEY UNITED ARAB EMIRATES VIETNAM
AIR PRODUCTS AS
Company reg.no: 917997500 Vige Havnevei 78, P.O. Box 4103 Kongsgaard, 4689 Kristiansand, NORWAY Telephone: +47 38 03 99 00. Telefax: +47 38 10 01 20 e-mail: [email protected] Internet: www.airproducts.no Company brochures and datasheets are available on the Internet. Air Products Norway was the first company to commercialize hollow fiber membranes for air separation onboard ships and offshoreinstallations. The first on-site nitrogen generation plant using hollow fiber membranes onboard a ship was installed in 1984 and the first on an offshore platform in 1985. To date Air Products Norway has delivered more than 1000 PRISM® membranes nitrogen systems on a wide variety of ship applications, and more than 220 PRISM® membranes nitrogen systems for offshore installations. See index of Products and Services:
HYDROGEN RECOVERY SYSTEMS - Boilers, burners and incinerators System groups: 64
NITROGEN GENERATORS - Generators, alternators & dynamos System groups: 376
INERT GAS SYSTEMS - Firefighting equipment - Inert gas components, CO2 System groups: 376
PURIFICATION SYSTEMS - Purification plants & fluid treatment System groups: 355,382,444,57,867
MEMBRANE SYSTEMS - Freshwater generation
373_470_LF_2016.indd 376 07.08.2016 11:47:08
377
DIRECTORY OF SUPPLIERS
ALFSEN OG GUNDERSON AS
Company reg.no: 910116207 Brynsveien 5, 0667 Oslo, P.O.Box 6052 Etterstad, 0601 Oslo, NORWAY Telephone: +47-22 70 77 00. Telefax: +47-22 70 77 01 e-mail: [email protected] Internet: www.ag.no Company brochures and datasheets are available on the Internet. Established: 1926 NS-EN ISO 9001:2008 NS-EN ISO 14001:2004 Managing director: Haakon Bryhn Member of INTSOK Alfsen og Gunderson AS (AG) is a Norwegian-owned engineering and trading company working with Dehumidifiers and Air treatment, Water treatment and Pump systems. In addition to our own products and systems, we market specialized products from suppliers of international repute. Systems based on self-developed technology forms the major part of AG’s revenues and are exported worldwide. See index of Products and Services:
ADSORPTION DRYERS - AC units, air dryers, air cooling and heating components System groups: 37
PUMPS - Pumps & pump units System groups: 3,353,354,438,6,7,803
AIR DRYERS - AC units, air dryers, air cooling and heating components System groups: 37
TANK DRYING - Evaporators, condensers and receivers System groups: 37
DEHUMIDIFIERS - Air and gas treatment (dehydrators, air separators) System groups: 37
WATER TREATMENT - Purification plants & fluid treatment System groups: 584
DRINKING WATER TREATMENT - Freshwater generation System groups: 584
373_470_LF_2016.indd 377 07.08.2016 11:47:08
DIRECTORY OF SUPPLIERS
378
ALU DESIGN & SERVICES AS
Company reg.no: 892167222 Skibåsen 44, 4636 Kristiansand, NORWAY Telephone: +47 46 82 60 00 e-mail: [email protected] Internet: www.alu-design.no Company brochures and datasheets are available on the Internet. The future of chair design Chairs are the centre of the maritime world. They are where operations are conducted, decisions made and goals achieved. Good chairs provide good working environments. Bad chairs cause fatigue, discomfort and unacceptable performance. Alu Design makes the market’s leading maritime seating. Chairs that set new standards in design, comfort, build quality and value. Our seats provide the best possible working environments, allowing operators to excel. We are, and put you, comfortably ahead of the competition - creating chairs for tomorrow’s challenges today. We are Alu Design, the future of chair design. See index of Products and Services:
CHAIRS, PILOT CHAIRS - Bridge inventory & equipment - Furniture & cabinets System groups: 541
Company reg.no: 935692113 Blindheim Industrivei 2e, 6020 Aalesund, NORWAY Telephone: +47-70 17 89 70. Telefax: +47-70 17 89 71 e-mail: [email protected] Internet: www.anda-olsen.no Anda-Olsen AS is a producer and supplier of DC and AC UPS systems for all types of vessels. Our unique Anda Power Solution sets a new standard for backup power systems onboard Vessels.
MARINE AND OFFSHORE UPS - AC units, air dryers, air cooling and heating components System groups: 7
CONVERTERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 42,867
The Supplier is represented in the following countries:
INDIA KOREA, SOUTH
SINGAPORE
373_470_LF_2016.indd 380 07.08.2016 11:47:08
381
DIRECTORY OF SUPPLIERS
AUTRONICA FIRE AND SECURITY AS, DIVISION MARITMECompany reg.no: 979975503 Haakon VIIs gate 4, Postboks 5620, 7483 Trondheim, NORWAY Telephone: +47 90 90 55 00. Telefax: +47-73 58 25 01 See index of Products and Services:
CARBON DIOXIDE MEASURING System groups: 815
OVERFILL ALARM SYSTEMS - Alarm equipment
EMERGENCY LIGHT - Safety equipment System groups: 503
PRESSURE ALARM SYSTEMS - Compressors
FIRE DETECTION SYSTEMS - Fire protection & detection equipment - Sensors, gauges & detectors System groups: 811
TEMPERATURE ALARM SYSTEMS - Sensors, gauges & detectors System groups: 381,79
FIRE EXTINGUISHING INSTALLATIONS - Firefighting equipment System groups: 81
VAPOUR ALARM SYSTEMS - Control & automation systems System groups: 35
FIRE-FIGHTING EQUIPMENT - Firefighting equipment
VOICE ALARM - Alarm equipment System groups: 42
GAS ALARM SYSTEMS - Alarm equipment System groups: 381
WATER INGRESS ALARM SYSTEMS - Monitoring equipment
LEVEL ALARM SYSTEMS - Control & automation systems - Monitoring equipment System groups: 381,79
WATERFOG SYSTEMS - Firefighting equipment System groups: 813
373_470_LF_2016.indd 381 07.08.2016 11:47:08
DIRECTORY OF SUPPLIERS
382
BAZE TECHNOLOGY ASCompany reg.no: 991658920 Moen 15, P.O. Box 1124, NO-3905 Porsgrunn, NORWAY Telephone: +47 94 80 06 00. Telefax: +47 35 10 54 99 See index of Products and Services:
ENTERTAINMENT EQUIPMENT - Entertainment equipment System groups: 546
INTERGRATED OPERATION EQUIPMENT - Project management, construction management System groups: 1
INFOTAINMENT SYSTEMS - Control & automation systems System groups: 42
MANAGEMENT OPERATION SYSTEMS - Control & automation systems System groups: 375,40
BEHA-HEDO INDUSTRIER ASCompany reg.no: 948905299 Frednesøya 21, 3933 Porsgrunn, P.O. Box 2704 Kjørbekk, 3702 Skien, NORWAY Telephone: +47 35 93 20 00. Telefax: +47 35 93 20 01 See index of Products and Services:
COFFEE MACHINES - Galley, pantry equipment and whiteware System groups: 551
REFRIGERATORS - Galley, pantry equipment and whiteware System groups: 541,551
DISHWASHING MACHINES - Galley, pantry equipment and whiteware System groups: 551
WASHING MACHINES - Cleaning equipment - Galley, pantry equipment and whiteware System groups: 551
ICE CUBE MACHINES - Galley, pantry equipment and whiteware System groups: 551
WASTE COMPACTORS - Sanitary & waste equipment System groups: 445
MESS EQUIPMENT - Galley, pantry equipment and whiteware System groups: 551
373_470_LF_2016.indd 382 07.08.2016 11:47:08
383
DIRECTORY OF SUPPLIERS
BERGEN AGENT ASCompany reg.no: 968117823 Rieber-Mohnsvei 2, Paradis, P.O. Box 431 Nesttun, 5853 Bergen, NORWAY Telephone: +47-55 92 28 90. Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.bergenagent.no Company brochures and datasheets are available on the Internet. 24 hours service - mobile telephone +47-975 85000 Warehouse facilities and site office at CCB offshore base, Ågotnes: Tel.: +47-55 92 28 90 Visiting: L4 Warehouse NO-5347 Kystbasen, Ågotnes Operation: Helge T. Seim - Tel.: +47-55 92 28 85 Arnfinn J. Seim - Tel.: +47-55 92 28 81 Accounts: Anne May Seim - Tel.: +47-55 92 28 87 Crew Transport: Frank Eriksen - Tel.: +47-98 20 50 02 BERGEN AGENT was established 1993, primarily to support and assist offshore clients, so far, handled by our sister company ALEX BIRGER GRIEG. BERGEN AGENT’s force is a small organization, manned and managed by well-experienced personnel. Dedicated staff and ‘single point of contact’ will be reflected in a high grade of efficiency, throughout the project. Our personnel will offer the best service within maritime logistics and ship agency, incl mob/demob operations and crew change arrangements. BERGEN AGENT is located between the town centre/harbour and the airport. See index of Products and Services:
BERGEN PLASTICS RUBBER SOLUTIONS ASCompany reg.no: 930124753 Sandbrekkeveien 85, P.O. Box 47 Nesttun, 5852 Bergen, NORWAY Telephone: +47 55 92 57 20. Telefax: +47 55 92 57 49 See index of Products and Services:
METAL MACHINING - Machinery and piping work System groups: 8
TECNICAL PLASTIC COMPONENTS - Plastic System groups: 196
TECHNICAL RUBBER APPLICATIONS - Other materials System groups: 196
BRUNVOLL A.S
Company reg.no: 995 884 070 Eikremsvingen 2 , 6422 Molde, NORWAY Telephone: +47-71 21 96 00. Telefax: +47-71 21 96 90 e-mail: [email protected] Internet: www.brunvoll.no Established: 1912 Managing Director: Odd Tore Finnøy Member of ”The Prime Group of Norway.” 24 hours service assistanse: +47 71 21 96 70 Brunvoll’s operation is dedicated to thrusters, and we supply and service complete thruster packages from A to Z. We take full responsibility for your thruster needs, including electric, hydraulic and diesel drive system packages. We can tailor systems to your specific propulsion and manoeuvring requirements, cutting installation time and life cycle costs. Brunvoll offers a complete technological environment with in-house expertise in hydraulics, hydrodynamics, electronics, mechanical and electrical engineering, and production. We are satisfied When we have supplied the quality thruster system specified, at a competetive price, on time, and when we have provided the support services required and expected.
373_470_LF_2016.indd 384 07.08.2016 11:47:08
385
DIRECTORY OF SUPPLIERS
- Traditions and marine experience since 1912 - 330 employees at main site in Molde, Norway - Modern production facilities - Quality system according to ISO 9001 See index of Products and Services:
AZIMUTH COMBI THRUSTERS - Thrusters and pods System groups: 404,63,635
PROPULSION - Other engine & propulsion equipment System groups: 40
AZIMUTH THRUSTERS, RETRACTABLE - Thrusters and pods System groups: 404,63,635
REM DRIVEN THRUSTERS (RDT) - Thrusters and pods System groups: 404,63,635
BOW PROPELLERS - Propellers & impellers System groups: 404
THRUSTER CONTROL, ALARM AND MONITORING SYSTEM - Control & automation systems System groups: 40
LOW NOISE TUNNEL THRUSTERS - Thrusters and pods System groups: 404,63,635
THRUSTERS - Thrusters and pods System groups: 404,635
PROPELLERS - Propellers & impellers System groups: 63
TUNNEL THRUSTERS - Thrusters and pods System groups: 404,63,635
The Supplier is represented in the following countries:
ARGENTINA AUSTRALIA BRAZIL CHILE CHINA CROATIA DENMARK FINLAND FRANCE GERMANY GREECE HONG KONG
ICELAND INDIA ITALY KOREA, SOUTH POLAND RUSSIA SINGAPORE SPAIN TURKEY UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES
373_470_LF_2016.indd 385 07.08.2016 11:47:08
DIRECTORY OF SUPPLIERS
386
CENTA TRANSMISJONER A.S.Company reg.no: 951166626 Breiliveien 49, P.O. Box 1551 Kilen, 3206 Sandefjord, NORWAY Telephone: +47-33 48 31 00. Telefax: +47-33 48 31 10 e-mail: [email protected] Internet: www.centa.no Manager: Børre Karlsrud Mob.: +47-90 13 90 28. e-mail: [email protected] Mechanical Engineer Sales: Øyvind Gjerstad Mob.: +47-90 96 77 04. e-mail: [email protected] Mechanical Engineer Sales: Stig Gøran Berget Mob.: +47-90 63 28 66 Logistics: Stig Torbergsen Mob.: +47-41 49 37 80. e-mail: [email protected] Established: 1989 The company is a subsidiary of CENTA Antriebe Kirschey GmbH in Germany. Main activities are power transmissions. The company represents: - CENTA Antriebe Kirschey GmbH, Haan, Germany: Elastic and flexible couplings. - REXNORD Antriebstechnik, Dortmund, Germany: Couplings, brakes, torque limiters, backstops and freewheels. - MALMEDIE Antriebstechnik GmbH., Düsseldorf, Germany: Gearcouplings. - SEW-Eurodrive a.s., Moss, Norway: Gearboxes, gearmotors, gearsystems, electric motors, inverters. - Danaher Motion, Stockholm, Sweden: Linear actuation systems. - Karl E. Brinkmann GmbH, KEB Antriebstechnik, Barntrup, Germany: Brakes, cluches and inverters See index of Products and Services:
FLEXIBLE ENGINE MOUNTS - Other engine & propulsion equipment System groups: 196
BRAKE EQUIPMENT - Brakes, couplings & shafts System groups: 403,406,432
GEARS - Gears System groups: 637,638
The Supplier is represented in the following countries: UNITED KINGDOM
373_470_LF_2016.indd 386 07.08.2016 11:47:08
387
DIRECTORY OF SUPPLIERS
CLEAN MARINE ASStrandveien 15, 1366 Lysaker, NORWAY Telephone: +47 21 04 33 11 See index of Products and Services:
EMISSION CLEANING SYSTEMS - Cleaning equipment System groups: 123,444,7
COMROD COMMUNICATION A/S
Company reg.no: 934335724 Fiskavegen 1, 4120 Tau Stavanger., NORWAY Telephone: +47-51 74 05 00. Telefax: +47-51 74 05 01 e-mail: [email protected] Internet: www.comrod.no Company brochures and datasheets are available on the Internet. Comrod designs and manufactures military antennas, marine antennas, telescopic & sectional masts, power supplies, battery chargers and specialist composite products Comrod Communication Group is an international company with development, production, sales & marketing of antennas and antenna systems, support masts, power supplies and battery chargers to the defence communication market. The Group also supplies antennas and antenna systems for commercial marine, as well as composite industrial products for the offshore and defence industry. Comrod Communication Group products are associated with innovative, high quality communication solutions and long-lasting products. The Norwegian subsidiary, Comrod AS, is a supplier of antennas, antenna systems and power supplies, mainly for the defence market, but also for other maritime and commercial applications. Comrod France SA, is a supplier of masts and mast systems, antennas and composite industrial products. Comrod Sweden AB (formerly WIBE Telescopic Masts) are a world leader in the design and manufacture of crank-up aluminium telescopic masts. The Group headquarters are located at Stavanger in South-Western Norway.
373_470_LF_2016.indd 387 07.08.2016 11:47:08
DIRECTORY OF SUPPLIERS
388
See index of Products and Services:
ANTENNAS - Antennas & transmitters System groups: 411
COMPOSITE PRODUCTS - Additives & agents System groups: 196
ANTENNAS, DEFENCE - Antennas & transmitters System groups: 411
COMPRESSED AIR TOOLS - Workshop equipment System groups: 44
RUST SCALING HAMMERS - Workshop equipment System groups: 443
373_470_LF_2016.indd 390 07.08.2016 11:47:09
391
DIRECTORY OF SUPPLIERS
EKORNES CONTRACT ASCompany reg.no: 954811506 6239 Sykkylven, NORWAY Telephone: +47 70 25 52 00. Telefax: +47 70 24 54 44 e-mail: [email protected] Internet: www.ekornes-contract.no Ekornes Contract er Ekornes sitt salgsapparat mot prosjektmarked og næringsliv. 7 ansatte jobber med salg og planlegging av prosjekter. I tillegg til å tilby produkter fra den brede Ekornes® og Stressless®-kolleksjonen, har vi underleverandører i flere segmenter. Ekornes Contract har lang erfaring og meget gode referanser innen totalinnredning av skip. Våre modulsystemer gir svært stor fleksibilitet, og vi er gjerne med som en medspiller i planleggingen av din skipsinnredning. Vi tilbyr spesialløsninger med utgangspunkt i vår basiskolleksjon, slik at du alltid kan være trygg på at vi har en skreddersydd løsning for deg. Alle våre produkter svarer til Veritas’ rattsertifisering, samt brannkravene i den britiske standarden BS5852 tk. 5. Våre huder, Batick, Cori og Paloma er dessuten godkjent med flammehemmende spesifikasjoner. Madrassen Svane®Original er i tillegg miljømerket med Svanen Bransjekontor: Ekornes Beds AS - Svane® madrasser NO-1900 Fetsund NORWAY Telephone: +47 63 88 33 00 Telefax: +47 63 88 02 73 Email: [email protected] www.ekornes.no See index of Products and Services:
FURNISHING - Furniture & cabinets System groups: 541
SEATS - Furniture & cabinets
MATTRESS - Furniture & cabinets System groups: 541
373_470_LF_2016.indd 391 07.08.2016 11:47:09
DIRECTORY OF SUPPLIERS
392
ELPRO INDUSTRIER ASCompany reg.no: 984738528 7318 Agdenes, NORWAY Telephone: +47-40 00 67 40. Telefax: +47-72 49 12 17 See index of Products and Services:
CONTROLING DESKS - Centrals, consoles & panels - Control & automation systems System groups: 79
SWITCHBOARDS - Switchboards & relays System groups: 871,872,875
DOORFRAMES - Interior doors & windows - Watertight/weathertight doors & windows System groups: 51
WINDOW FRAMES - Interior doors & windows - Watertight/weathertight doors & windows System groups: 51
ELTORQUE ASCompany reg.no: 976944968 Lyng Industrial Park, 7125 Vanvikan, NORWAY Telephone: +47-74 85 55 20. Telefax: +47-74 85 55 12 See index of Products and Services:
ACTUATORS - Pneumatic actuators System groups: 381,601,651,79
FLOW CONTROL SYSTEM - Control & automation systems System groups: 6
CONTROL INTERFACES - Control & automation systems System groups: 6
QUARTER-TURN ACTUATORS - Hydraulic motors & actuators System groups: 651
373_470_LF_2016.indd 392 07.08.2016 11:47:09
393
DIRECTORY OF SUPPLIERS
ENWA WATER TECHNOLOGY AS
Company reg.no: 992592451 Skansegaten 2, Tolboden, 4001 Stavanger, NORWAY Telephone: +47-51 63 43 00. Telefax: +47-51 63 43 01 e-mail: [email protected] Internet: www.enwa.com Produksjon og salg av utstyr og anlegg for vannbehandling. Avdelingskontorer: Enwa AS, Oslo Tlf.: 22 32 39 00. Telefax: 22 30 40 11. Enwa AS, Trondheim Tlf.: 72 89 84 10. Telefax: 72 89 84 11. Enwa AB, Sverige Tlf.: +46-31 742 90 50. Telefax: +46-31 742 90 60. Enwa AB, Sundsbruk, Sverige Tlf.: +46-60 537 17 0. Telefax: +46-60 537 06 6. Enwa AB, Haninge, Sverige Tlf.: +46-8 776 33 23. Telefax: +46-8 776 33 23. Enwa AS, Sandefjord Tlf.: 33 48 80 50. Telefax: 33 47 89 20. Verksteder og service world wide. See index of Products and Services:
ANTI-CORROSION AGENTS - Anti-corrosion System groups: 27,28
DRINKING WATER TREATMENT - Freshwater generation System groups: 584
ANTI-CORROSION EQUIPMENT - Anti-corrosion System groups: 443
DRINKING WATER FILTERS - Fluid filters - Freshwater generation System groups: 584
WATER TREATMENT - Purification plants & fluid treatment System groups: 584
373_470_LF_2016.indd 393 07.08.2016 11:47:09
DIRECTORY OF SUPPLIERS
394
EUROROPE MARINE AS
Company reg.no: 986466800 Stensarmen 9, 3212 Tønsberg, NORWAY Telephone: + 47 46 88 68 30 e-mail: [email protected] Internet: www.europemarine.no Company brochures and datasheets are available on the Internet. EuroRope Marine is the continuation of ScanRope Marine, a well known and highly trusted supplier of mooring ropes and accessories to the marine industry. The company’s main credentials remain the renowned product range Karat ®, the experienced staff, and the high degree of service we provide. The name change is the final stage in a transition that started in 2004 when the company became part of EUROROPE S.A., one of Europe’s largest and most dynamic rope manufacturers. All Karat ® rope manufacturing takes place at a large and ultra-modern manufacturing plant in Piraeus, Greece. The factory was built in 2002 and has achieved its goal of high efficiency and unsurpassed quality. For our customers this means receiving reliable products at competitive prices delivered to the agreed destination at the agreed time. EuroRope Marine’s highly skilled staff based in Tønsberg, Norway, has a reputation for friendly service and a fundamental understanding of the shipping companies’ needs. Karat Maxi mooring ropes are therefore stocked at strategic ports throughout the world, including Rotterdam, Aberdeen, Houston, Singapore and Dubai. Furthermore, quality wire ropes and rope accessories are procured from approved manufacturers to ensure our customers a complete range of marine ropes and hardware. See index of Products and Services:
FAIRLEAD SHACKLES - Blocks & shackles System groups: 274,32
ROPES - Chains, wires & ropes System groups: 43,437
The Supplier is represented in the following countries:
GERMANY JAPAN SINGAPORE
SPAIN UNITED ARAB EMIRATES UNITED STATES
373_470_LF_2016.indd 394 07.08.2016 11:47:09
395
DIRECTORY OF SUPPLIERS
FINNØY GEAR & PROPELLER AS
Company reg.no: 956659485 Finnøy, 6487 Harøy, NORWAY Telephone: +47 71 27 60 00. Telefax: +47 71 27 60 35 e-mail: [email protected] Internet: www.finnoygear.no Company brochures and datasheets are available on the Internet. Finnøy was founded in 1884. From 1902 to 1975 we produced engines with propellers. Our first hydraulic controllable pitch propeller was delivered in 1932. Since 1975 we have specialised in the design and manufacture of gearboxes and controllable Pitch propellers. Our product range is reduction gearboxes, controllable pitch propellers, fixed nozzles, steering nozzles and remote controls. We have a continous Development programme in propeller systems and our intention is to be a market leader in this field. Finnøy is located in modern production halls with modern production machines to meet the demands the market requires. See index of Products and Services:
GEARBOXES - Gears
REMOTE CONTROL - Control & automation systems System groups: 381,79
PROPELLERS - Propellers & impellers System groups: 63
The Supplier is represented in the following countries:
AUSTRALIA CHINA GERMANY GREECE INDIA KOREA, SOUTH ROMANIA RUSSIA
SINGAPORE SOUTH AFRICA SPAIN TURKEY UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES
373_470_LF_2016.indd 395 07.08.2016 11:47:09
DIRECTORY OF SUPPLIERS
396
FIRE FIGHTING SYSTEMS ASCompany reg.no: 883747062 Tykkemyr 27, 1597 Moss, NORWAY Telephone: +47 69 24 49 90. Telefax: +47 69 24 49 95 See index of Products and Services:
FIRE-FIGHTING SYSTEMS - Firefighting equipment System groups: 505,81
FREMO ASCompany reg.no: 850977712 Helgeroveien 3, P.O. Box 38, 3291 Stavern, NORWAY Telephone: +47 33 19 65 00. Telefax: +47 33 19 65 01 e-mail: [email protected] Internet: www.fremo.com Company brochures and datasheets are available on the Internet. Established: 1916 General Manager: Sverre R. Nyegaard Developing and manufacturing of Fremo oil and gas burners, booster pumps, and oil pre-heaters. See index of Products and Services:
NOZZLES - Air nozzles, jealousies and batteries - Fluid nozzles & mixing batteries System groups: 401,404,62
PUMP UNITS - Pumps & pump units - Regulators & switches System groups: 309,438,439
OIL BURNERS - Boilers, burners and incinerators System groups: 577,641,644
PUMPS - Pumps & pump units System groups: 3,6,7
OIL FILTERS - Fluid filters System groups: 70,71
SCREW PUMPS - Pumps & pump units
OIL PREHEATERS - Preheaters System groups: 703
373_470_LF_2016.indd 396 07.08.2016 11:47:09
397
DIRECTORY OF SUPPLIERS
GJERDE AS, JOHNCompany reg.no: 931973673 Bryggjebakken, 6083 Gjerdsvika, NORWAY Telephone: +47 70 02 65 00. Telefax: +47 70 02 65 01 See index of Products and Services:
CHECK VALVES - Fluid valves & other armatures System groups: 3
VALVES - Fluid valves & other armatures System groups: 3
FUEL FILTER - Fluid filters System groups: 6
GLAMOX INTERNATIONAL ASABrudalsveien 216, 6011 Ålesund, NORWAY Telephone: +47 70 14 30 16 See index of Products and Services:
ARCHITECTURAL LIGHTS - Lighting equipment & armatures System groups: 89
HELIDECK-LIGHTING - Lighting equipment & armatures System groups: 427,89,893
AREA LIGHTING - Lighting equipment & armatures System groups: 503,89,893
LIGHTING - Lighting equipment & armatures System groups: 89,891,892
DOWNLIGHTS - Lighting equipment & armatures System groups: 89,892
NAVIGATION LIGHTS - Lighting equipment & armatures System groups: 893
EMERGENCY LIGHTS - Lighting equipment & armatures System groups: 503,89
SEARCHLIGHTS - Lighting equipment & armatures System groups: 89
GLAVA ASCompany reg.no: 912008754 P.O. Box F, 1801 Askim, NORWAY Telephone: +47 69 81 84 00. Telefax: +47 69 81 84 78 See index of Products and Services:
COMFORT ISOLATION - Insulation System groups: 51
FIRE INSULATION - Fire protection & detection equipment System groups: 51
GRIEG A/S, ALEX. BIRGERCompany reg.no: 912085775 Rieber-Mohns vei 2, 5230 Paradis, P.O. Box 432 Nesttun, 5853 Bergen, NORWAY Telephone: +47-55 92 28 80. Telefax: +47-55 92 28 88 e-mail: [email protected] Internet: www.alexgrieg.no Company brochures and datasheets are available on the Internet. 24 hour service - mobile telephone +47-975 85000 Warehouse facilities and site office at CCB offshore base, Ågotnes: Tel.: +47-55 92 28 90 Visiting: L4 Warehouse Kjeller NO-5347 Kystbasen, Ågotnes The Company was founded in 1891 by Alexander Birger Grieg, close relative to the Composer Edvard Grieg. From its founding the company brokered small tankers and dry cargo chartering both shortsea and deep sea. However since 1982 the company has been focused on specializing within chartering of oversized, awkward & heavy project cargo together with Port Agencies. In 1972 Mr. Arnfinn J. Seim entered the company and since 1995 the sole Owner, however with the decision to maintain the company name as an easy reference to quality, dedication and personal service. Today customers around the world, still recognize Alex. Birger. Grieg A/S as a top professional ship broker company, with great expertize within the Heavy Lift sector & 1st Class Port Agency Services all over Norway. See index of Products and Services:
HALVORSEN POWER SYSTEMJåttåflaten 10, 4020 Stavanger, NORWAY Telephone: +47 992 85 600 See index of Products and Services:
ALARM & MONITORING SYSTEMS - Alarm equipment - Monitoring equipment System groups: 381,79,792
SMART LINK - Documentation & data management
FIN STABILIZATION - Steering equipment & stabilizers System groups: 405
TANK LEVEL SYSTEMS - Control & automation systems System groups: 79
POWER MANAGEMENT - Alarm equipment - Monitoring equipment System groups: 381,79,792
373_470_LF_2016.indd 399 07.08.2016 11:47:09
DIRECTORY OF SUPPLIERS
400
HANSEN PROTECTION AS
Company reg.no: 871200092 Tykkemyr 27, P.O. Box 218, 1501 Moss, NORWAY Telephone: +47 69 00 13 00. Telefax: +47 69 00 13 01 e-mail: [email protected] Internet: www.hansenprotection.no Company brochures and datasheets are available on the Internet. We develop, design and manufacture both standard and tailor-made hi-tech textile products for various sectors. We have more than 100 years of experience in manufacturing protective clothing and life jackets for seafarers. Our teams have been designing, developing and making rescue and survival suits for the North Sea Oil Industry since 1976. In addition our activities include canopies for leisure boats, as well as products for agricultural applications and the health sector. We are also a major supplier to the Norwegian Defence Forces. . See index of Products and Services:
THERMAL PROTECTION AID - Fire protection & detection equipment
LIFE JACKETS - Lifesaving equipment - Personal equipment System groups: 503
TRANSPORT SUITS - Lifesaving equipment System groups: 503
PASSENGER SUITS - Lifesaving equipment System groups: 503
WORK/SURVIVAL SUITS - Personal equipment - Safety equipment System groups: 503
SPECIAL SUITS - Lifesaving equipment System groups: 503
The Supplier is represented in the following countries:
AUSTRALIA BELGIUM CANADA CHINA DENMARK FINLAND GERMANY
NETHERLANDS, THE POLAND SINGAPORE SWEDEN UNITED KINGDOM UNITED STATES
373_470_LF_2016.indd 400 07.08.2016 11:47:09
401
DIRECTORY OF SUPPLIERS
HARDING SAFETY AS
Company reg.no: 990322767 Seimsvegen 116, 5472 Seimsfoss, NORWAY Telephone: +47 53 48 36 00. Telefax: +47 53 48 36 01 e-mail: [email protected] Internet: www.harding.no Company brochures and datasheets are available on the Internet. Harding is the global market leader of marine life-saving systems, with a solid track record of deliveries to offshore installations and vessels worldwide. The company developed the first lifeboat (FF1200) fulfilling the new regulation, DNV 406, for the North Sea and it is also the developer of the enclosed davit system. Harding was formed in 2013 when Schat Harding and Noreq AS merged together in order to form the world’s leading manufacturer and supplier of lifesaving equipment. Our history, however, goes all the way back to the 1920’s. Bergen Branch: Lønningsflaten 25, 5258 Blomsterdalen, Bergen Phone: +47 53 48 36 00 - Fax: +47 53 48 36 01 Stavanger Branch: Hammaren 23, 4056 Tananger - Stavanger Phone + 47 53 48 37 07 - +47 53 48 36 01 Ølve Branch: Ølvesvegen 447, 5637 Ølve See index of Products and Services:
DAVITS - Davits and masts System groups: 501
LIFEBOATS - Lifeboats/rafts & other boats System groups: 501,503
HOOKS - Blocks & shackles System groups: 274,344
RESCUE BOATS - Lifeboats/rafts & other boats - Lifesaving equipment System groups: 501,503
The Supplier is represented in the following countries:
AUSTRALIA BRAZIL CHINA CYPRUS DENMARK GERMANY KOREA, SOUTH
MALAYSIA POLAND RUSSIA SINGAPORE SPAIN UNITED ARAB EMIRATES UNITED STATES
373_470_LF_2016.indd 401 07.08.2016 11:47:09
DIRECTORY OF SUPPLIERS
402
HELSETH A/SCompany reg.no: 959730784 Bakliveien 11-13, 6450 Hjelset, NORWAY Telephone: +47-71 20 29 00. Telefax: +47-71 20 29 02 See index of Products and Services:
HOT DIP GALVANIZING - Anti-corrosion System groups: 276
PROPELLERS - Propellers & impellers System groups: 63
PITCH PROPELLERS, CONTROLLABLE - Propellers & impellers System groups: 634
HERNIS SCAN SYSTEMS ASCompany reg.no: 953054086 Tangen Alle 41, P.O. Box 791 Stoa, 4809 Arendal, NORWAY Telephone: +47-37 06 37 00 See index of Products and Services:
CABLES - Power cables System groups: 85,86,87,88
CONTROL PANELS - Centrals, consoles & panels System groups: 1
CAMERA STATIONS, HAZARDOUS AREAS - Control & automation systems System groups: 1
CONTROL SYSTEMS - Control & automation systems System groups: 1,17,381
CAMERA STATIONS, SAFE AREAS - Control & automation systems System groups: 1
DISPLAY UNITS - Control & automation systems System groups: 1
CCTV - Monitoring equipment - Other communication equipment System groups: 416
373_470_LF_2016.indd 402 07.08.2016 11:47:09
403
DIRECTORY OF SUPPLIERS
HØGLUND MARINE AUTOMASJON ASCompany reg.no: 966107650 Carl 15 gate 19, 3150 Tolvsrød, NORWAY Telephone: +47 33 41 41 50. Telefax: +47 33 41 49 46 See index of Products and Services:
ALARM LOGGER - Alarm equipment System groups: 109,42
POWER MANAGEMENT SYSTEMS - Control & automation systems System groups: 795
FUEL OIL CALCULATION SYSTEM - Control & automation systems System groups: 196,6,62
PROCESS CONTROL SYSTEMS - Control & automation systems
TEMPERATURE SWITCHES - Sensors, gauges & detectors System groups: 381,79
GPS - Positioning & navigation equipment System groups: 412
THERMO CAMERAS - Monitoring equipment - Other communication equipment System groups: 416
GYRO COMPASSES - Positioning & navigation equipment System groups: 413
VHF RADIO - Radio & telephone communication System groups: 424
LRIT - LONG RANGE IDENTIFICATION AND TRACKING SYSTEM - Detection & identification equipment System groups: 196
373_470_LF_2016.indd 404 07.08.2016 11:47:09
405
DIRECTORY OF SUPPLIERS
IMS ASCompany reg.no: 932402920 Moland Vest, 4994 Akland, NORWAY Telephone: +47 37 14 32 00. Telefax: +47 37 14 32 01 See index of Products and Services:
AUTOMATION - Control & automation systems System groups: 79
MACHINING - Machinery and piping work System groups: 196
DOORS, WATERTIGHT - Watertight/weathertight doors & windows System groups: 513,514
OIL SPILL RESPONSE - Anti-pollution equipment System groups: 153
LASER CUTTING - Welding & cutting equipment System groups: 441
SAFETY WINDOWS - Watertight/weathertight doors & windows System groups: 951
JASON ENGINEERING ASCompany reg.no: 942135610 Grønland 82, P.O. Box 2151, 3003 Drammen, NORWAY Telephone: +47-32 20 45 50. Telefax: +47-32 20 45 60 See index of Products and Services:
DISPERSANT SYSTEMS - Control & automation systems System groups: 814
PUMPS - Pumps & pump units System groups: 3,7
FIRE MONITORS - Firefighting equipment
TELESCOPIC MASTS - Firefighting equipment
FIREFIGHTING SYSTEMS - Firefighting equipment System groups: 816,818,819
TRANSMISSIONS - Pumps & pump units System groups: 3,7
GEARS - Gears System groups: 638
373_470_LF_2016.indd 405 07.08.2016 11:47:09
DIRECTORY OF SUPPLIERS
406
JETS VACUUM AS
Company reg.no: 857788982 Myravegen 1, 6060 Hareid, NORWAY Telephone: +47 70 03 91 00. Telefax: +47 70 03 91 01 e-mail: [email protected] Internet: www.jetsgroup.com A SMARTER SANITARY SYSTEM FOR ANY TYPE OF VESSEL The scalability of the JetsT vacuum solutions allow their use in virtually every possible scenario, from one-toilet cabin systems, to the world’s largest cruise vessels with thousands of passengers. In-line installation of the VacuumaratorT pump combined with a small footprint and low weight allows for unique installation flexibility and considerable weight savings. These advantages, along with low energy consumption, make JetsT the preferred choice for designers, yards and owners. Easy to install, operate and maintain, JetsT equipment is renowned for its high level of quality and reliability, which is appreciated by crews and passengers on the high seas, as well as by our customers onshore. A complete JetsT sanitary system combines our vacuum toilets with VacuumaratorT pumps connected to our own sewage treatment plant: EcomotiveT by JetsT. All built and delivered with best-in-class knowledge and installed using three decades’ worth of experience. See index of Products and Services:
RADAR TRANSPONDERS - Antennas & transmitters System groups: 411
ANTENNAS - Antennas & transmitters System groups: 411
SEARCH AND RESCUE RADAR TRANSPONDERS - Detection & identification equipment System groups: 411
COMMUNICATION - Other communication equipment System groups: 42
SOUND RECEPTION SYSTEMS - Control & automation systems System groups: 42
EMERGENCY POSITION INDICATING RADIO BEACON- EPIRB/S-VDR - Positioning & navigation equipment System groups: 41
TELEPHONE SYSTEMS - BATTERYLESS - Radio & telephone communication System groups: 42
INTEGRATED COMMUNICATION SYSTEMS - Other communication equipment System groups: 42
UHF RADIO - Radio & telephone communication System groups: 424
INTERCOM SYSTEMS - Control & automation systems System groups: 42
VHF RADIO - Radio & telephone communication System groups: 424
PUBLIC ADDRESS SYSTEM - Control & automation systems System groups: 42
373_470_LF_2016.indd 407 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
408
JOTUN COATINGS
Company reg.no: 923248579 Hystadveien 167, 3209 Sandefjord, P.O. Box 2021, 3202 Sandefjord, NORWAY Telephone: +47-33 45 70 00. Telefax: +47-33 45 79 00 e-mail: [email protected] Internet: www.jotun.com Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings. We have 71 companies and 36 production facilities on all continents, and are represented in more than 90 countries with our network of agents, branch offices, distributors and sales offices around the world. Our operations cover development, production, marketing, R&D and sales of paints and coatings to protect and decorate surfaces in residential, shipping, and industrial markets. Jotun is organised in four segments and seven geographical regions, with its head office located in Sandefjord, Norway. Protective coatings Our protective coatings are protecting assets in industries such as offshore, energy, infrastructure and hydrocarbon processing. Marine coatings As the world’s leading provider of marine coatings we supply to ship owners, management companies and others for both newbuilding and dry dock. Powder coatings Pur powder coatings are supplied to manufacturers of appliances, furniture, building components, pipelines and general industries. Decorative paints Our interior and exterior paints are being used by consumers and professionals worldwide, for protection and decoration. See index of Products and Services:
ANTI-CORROSIVE AGENTS - Anti-corrosion System groups: 27,28
WIRE ROPES - Chains, wires & ropes System groups: 43
KONGSBERG EVOTECMyrvåg, 6080 Gurskøy, NORWAY Telephone: +47-94 94 10 00 See index of Products and Services:
BULK HOSE SECURING UNITS - Hoses, drums, packings & fittings System groups: 196
SEISMIC PRODUCTS - Subsea & seismic equipment System groups: 196
DECK EXTENDERS - Sections, foundations, pillars, structural units and bulkheads System groups: 48
STREAMER HANDLING SYSTEMS - Anchor, pipe & cable handling equipment System groups: 48
OIL RECOVERY HANDLING SYSTEMS - Boilers, burners and incinerators System groups: 481
373_470_LF_2016.indd 409 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
410
KONGSBERG MARITIME AS
Company reg.no: 979750730 Kirkegårdsveien 45, P.O. Box 483, 3601 Kongsberg, NORWAY Telephone: +47 32 28 50 00. Telefax: +47 32 28 50 10 e-mail: [email protected] Internet: www.km.kongsberg.com Business activities: We deliver systems for dynamic positioning and navigation, marine automation, safety management, cargo handling, subsea survey and construction, maritime simulation and training, and satellite positioning. Our solutions enhance efficiency and safety throughout the whole maritime technology spectrum and we offer additional competence in providing turnkey engineering services within the shipbuilding and floating production sectors. Market sector: Key markets are countries with large offshore, shipyard and energy exploration & production industries. In exploration we provide sophisticated underwater and positioning technology and systems for survey vessel operation. In field development, we support construction and offshore vessels with innovative solutions for operation and specialist applications whilst in production our hardware and software enhances output and minimises downtime. For maritime transport and offshore vessels, we supply The Full Picture, including navigation, automation, training and safety systems.
373_470_LF_2016.indd 410 07.08.2016 11:47:10
411
DIRECTORY OF SUPPLIERS
See index of Products and Services:
BRIDGE SYSTEMS - Control & automation systems System groups: 42,791,875
SENSORS - Sensors, gauges & detectors
CAMERA SYSTEMS - Subsea & seismic equipment System groups: 414,481
SIMULATORS - Control & automation systems System groups: 109
DECK SYSTEMS - Cranes, crane equipment, lifting devices & booms System groups: 3,32
TANK GAUGING AND MEASUREMENTS - Cargo handling equipment System groups: 3
ENGINE ROOM SYSTEMS - Control & automation systems System groups: 79,791
TRANSMITTERS - Sensors, gauges & detectors
NAVAL SYSTEMS - Control & automation systems System groups: 41
SAFETY SYSTEMS - Control & automation systems System groups: 375
The Supplier is represented in the following countries:
BRAZIL CANADA CHINA GERMANY GREECE INDIA ITALY KOREA, SOUTH MEXICO
NETHERLANDS, THE POLAND RUSSIA SINGAPORE SPAIN UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES
373_470_LF_2016.indd 411 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
412
KONGSBERG SEATEX ASCompany reg.no: 982786185 Pirsenteret , 7462 Trondheim, NORWAY Telephone: +47 73 54 55 00. Telefax: +47 73 51 50 20 e-mail: [email protected] Internet: www.km.kongsberg.com/seatex Global source for marine and offshore electronics KONGSBERG SEATEX is a marine electronics manufacturer with products for precision positioning and motion sensing. Our commitment is to provide quality products and solutions for safe navigation and operations at sea. We provide innovative and reliable precision positioning and motion sensing systems. As part of Kongsberg Maritime we can provide complete ship and offshore systems. KONGSBERG SEATEX provides the following range of products: Attitude Determination Systems - Motion Reference Units - Helideck Monitoring Systems - High-end solutions for precision positioning Surface Positioning Reference Systems - Relative positioning - Absolute positioning - High end GPS/Glonass solutions Automatic Identification Systems - AIS Infrastructure for coastal surveillance - AIS Mobile Stations for onboard use Global Navigation Satellite Systems - Project oriented development of today’s and future navigation systems See index of Products and Services:
KYMA ASCompany reg.no: 974416549 Åsamyrane 88B, 5116 Ulset Bergen, NORWAY Telephone: +47-55 53 00 14. Telefax: +47-55 53 00 17 See index of Products and Services:
COMPUTER SYSTEMS - Computer hardware - Onboard software System groups: 542
PERFORMANCE TESTING - Inspection and testing (NDT, pressure, performance, trial trip, etc) System groups: 793
CONDITION MONITORING SYSTEMS - Monitoring equipment
SHAFT-TORQUE-METERS - Meters & indicators System groups: 793
FUEL ECONOMIZING SYSTEMS - Other engine & propulsion equipment - Purification plants & fluid treatment
373_470_LF_2016.indd 414 07.08.2016 11:47:10
415
DIRECTORY OF SUPPLIERS
L-3 COMMUNICATIONS VALMARINE ASCompany reg.no: 977040329 Buskerudveien 129, P.O. Box 881, 3007 Drammen, NORWAY Telephone: +47 32 21 81 00. Telefax: +47 32 21 17 87 See index of Products and Services:
AUTOMATION EQUIPMENT - Control & automation systems System groups: 79
NAVIGATION SYSTEMS - Positioning & navigation equipment System groups: 41
BRIDGE CONTROL SYSTEMS - Bridge inventory & equipment System groups: 419
PLATFORM MANAGEMENT SYSTEM - Control & automation systems System groups: 1
MONITORING EQUIPMENT - Monitoring equipment System groups: 381,79
SAFETY MANAGEMENT SYSTEMS - Administration, broking, finance & insurance services
373_470_LF_2016.indd 415 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
416
LIBRA-PLAST AS
Company reg.no: 950603739 Raffelneset 12, 6060 Hareid., NORWAY Telephone: +47-70 09 54 00. Telefax: +47-70 09 54 01 e-mail: [email protected] Internet: www.libra.no Established: 1954 Through innovative products, Libra has remained an important supplier to the world`s maritime industry during the last 60 years. Ship doors are Libra`s primary focus area and the company is a world leader in this sector. Libra supply all types of vessels with a complete range of IMO-compliant, hinged, external and internal bulkhead doors made of steel, aluminum, stainless steel or composite materials. All doors are visualized by 3D models and drawings. A complete set of accurate drawings accompanies all quotes and supplies. Libra also produce safe storage cabinets and containers for emergency and rescue equipment. Our cabinets can also be supplied with EX heating and/or EX lighting on request for your offshore ship or rig installation. GRP cabinets and containers has the advantage of lightweight, long service life and low maintenance. Libra supply products worldwide and we have agents on all continents working for us closer to your time zone. Please visit our internet site for more information about your closest contact point. Or contact our head office directly in case you have any questions.
373_470_LF_2016.indd 416 07.08.2016 11:47:10
417
DIRECTORY OF SUPPLIERS
See index of Products and Services:
BATTERY BOXES - Bins, baskets, boxes and containers System groups: 866
DOORS, WATERTIGHT - Watertight/weathertight doors & windows System groups: 513,514
CABINETS FOR EQUIPMENT - Bins, baskets, boxes and containers System groups: 48
DOORS, WEATHERTIGHT - Watertight/weathertight doors & windows System groups: 514
CONTAINERS - Bins, baskets, boxes and containers System groups: 315
EQUIPMENT CABINETS - Furniture & cabinets
DOORS - Interior doors & windows - Watertight/weathertight doors & windows System groups: 51
DOORS, LIGHTWEIGHT - Watertight/weathertight doors & windows System groups: 513,514
INSTRUMENT CONSOLES - Centrals, consoles & panels
DOORS, SPRAYTIGHT - Watertight/weathertight doors & windows System groups: 513,514
LIFE JACKET CONTAINERS - Bins, baskets, boxes and containers - Lifesaving equipment System groups: 503
The Supplier is represented in the following countries:
AUSTRALIA CHINA CROATIA DENMARK FINLANDFRANCE GREECE HONG KONG ITALY JAPAN
KOREA, SOUTH NETHERLANDS, THE NEW ZEALAND PORTUGAL SINGAPORE SPAIN TURKEY UNITED KINGDOM VIETNAM
373_470_LF_2016.indd 417 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
418
LIGHT STRUCTURES ASNils Hansens vei 2, 0667 Oslo, NORWAY Telephone: +47 23 89 71 33 See index of Products and Services:
MONITORING SYSTEMS - Monitoring equipment
LILAAS AS
Company reg.no: 997346912 Kongeveien 75, P.O. Box 705, 3196 Horten, NORWAY Telephone: +47-33 03 18 50. Telefax: +47-33 03 18 60 e-mail: [email protected] Internet: www.lilaas.no Lilaas AS is one the world’s leading manufacturers of maritime control levers, joysticks and wheels. Fishing boats and ferries, supply vessels, large tankers, cruise ships and cranes are manoeuvred by control levers from Lilaas. Lilaas has 50 years in business. The governing idea has always been quality. Traditions are important, but the company is in a constant stage of transition, as its customers are. Control units are the major contributor to Lilaas’ turnover. The range includes products from simple to very complex, from one-axis control levers, hand wheels and rudder controls, to azimuth control units and multi-axis joysticks. All units may be delivered motorised on all axes and with several optional features. Most models are certified by Det Norske Veritas (DNV). The Azimuth Electronic Shaft System (AESS), developed by Lilaas and known for its reliability, is used in a wide range of applications. Master and slave control levers are connected for simultaneous operation. Unique design, top-grade materials and thorough testing give products of high quality that require a minimum of service and maintenance. In addition to a broad standard assortment of control levers, Lilaas offer specialised solutions designed to customer specifications. The company has experienced excellent working co-operation between customers, professional industrial designers and its own engineers. Accordingly, we are releasing a new generation control levers. A new look and a new technology will be available in 2011. Lilaas has received a handful award of design excellence, national and international. It’s several times awarded Norwegian Design Council’s award for Design Excellence, and once the Red Dot award from the international Red dot institute for advanced design studies. The company has recruited a staff of skilled operators and engineers and created state-of-the-art equipped departments for mechanical production and manual assembly. It cooperate with
373_470_LF_2016.indd 418 07.08.2016 11:47:10
419
DIRECTORY OF SUPPLIERS
demanding customers, such as Rolls-Royce Marine, Kongsberg Maritime, Berg Propulsion, Wärtsilä and other suppliers and shipbuilders in maritime and offshore related industry. Lilaas also supply medicine, defense, space/satellite related industries with precision mechanics. Modern machinery and skilled staff makes the company capable to cope with stringent grades of tolerance, a characteristic force of its production. The machine department produces small and medium sized details in a range of materials, such as stainless/acid-proof steel, titan, inconel 718, covar, hasteloy, brass, aluminum and various plastic materials. The Lilaas factory uses CNC-controlled machine tools with integrated CAD/CAM, and design and production uses technology such as Pro/Engineer and EdgeCam. See index of Products and Services:
CONTROL LEVERS - Regulators & switches System groups: 791
PRECISION MECHANICS - Other construction assistance (cleaning, rigging, stores, support)
JOYSTICK - Control & automation systems System groups: 403,63,791
MACGREGOR PUSNES ASCompany reg.no: 951925357 Skilsøveien 368 Pusnes, 4818 Færvik, NORWAY Telephone: +47 37 08 73 00. Telefax: +47 37 08 61 21 See index of Products and Services:
BOW LOADING SYSTEMS (BLS) - Cargo handling equipment
STEERING GEARS - Steering equipment & stabilizers System groups: 40,403,637
WINDLASSES - Capstans, bollards & hawse holes System groups: 432,433
373_470_LF_2016.indd 419 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
420
MARINE ALUMINIUM A.S
Company reg.no: 988419486 Husøyvn. 165, P.O. Box 134, 4299 Avaldsnes, NORWAY Telephone: +47-52 84 84 00 e-mail: [email protected] Internet: www.m-a.no Company brochures and datasheets are available on the Internet. Established 1953 Marine Aluminium AS (MA) is one of the world’s leading companies within engineering, design and fabrication of aluminium structures and products for the offshore and shipbuilding industry. MA has more than 60 years experience working with aluminium, with particular competence in the fields of material technology, extrusion tooling and welding techniques. The site includes spacious indoor facilities, as well as a large quay capable of load out of structures in excess of 1000 MT and mooring up to three rigs simultaneously. The firm has an extensive production of aluminium-constructions such as: - Helicopter decks - Accommodation ladders with davits - Wheelhouses and other superstructures - Aluminium boats - Friction stir welded panels - Extruded aluminium profiles - Engineering - Finishing and welding - Aluminium structures The firms main products offshore is helicopter decks, telescopic personnel bridges and customer specified structures
Company reg.no: 970949763 Breivika Industriveg 65, P.O. Box 8193 Spjelkavik, 6022 Ålesund, NORWAY Telephone: +47-70 17 15 65. Telefax: +47-70 17 15 55 e-mail: [email protected] Internet: www.maritime-partner.com Company brochures and datasheets are available on the Internet. Established: 1994 Supplier of Mob boats, rescue boats, work boats in MP, Seabear, Alusafe and Weedo design. Body sizes 5 - 25 metre. Repairs, upgrading of Mob/-work and rescue boats. Stand-By Rescue equipment After-Sales Service Follow up of delivered boats takes first priority at Maritime Partner. All Alusafe, Seabear, Springer and Weedo boats delivered are supported from one OEM (Original Equipment Manufacturer) - Maritime Partner. MacGregor Breivassvegen 105 P.O. Box 64 NO-5363 Ågotnes Telephone: +47 56 31 33 00 - Telefax: +47 56 31 33 23 Contact person: Bjørnar Andersen www.macgregor-group.com Maritronic & Kristiansand Båtservice A/S Bråvannskleiva 10 P.O. Box 7033 NO-4674 Kristiansand Telephone: +47 913 68 300 Email: [email protected] www.maritronic.no See index of Products and Services:
ALUMINIUM BOATS - Lifeboats/rafts & other boats System groups: 443,501
MOB BOATS - Lifeboats/rafts & other boats System groups: 501
DAVITS - Davits and masts System groups: 501,502
RESCUE BOATS - Lifeboats/rafts & other boats System groups: 501
LIFE-SAVING EQUIPMENT - Lifesaving equipment System groups: 50
SAFETY EQUIPMENT - Safety equipment System groups: 503
373_470_LF_2016.indd 422 07.08.2016 11:47:10
423
DIRECTORY OF SUPPLIERS The Supplier is represented in the following countries:
ARGENTINA AUSTRALIA BRAZIL CHINA FINLAND FRANCE GREECE ICELAND
INDIA JAPAN KOREA, SOUTH KUWAIT SINGAPORE SPAIN UNITED STATES
MARITIME PROTECTION ASCompany reg.no: 894 038 322 Bosmyrkollen 2, 4620 Kristiansand, NORWAY Telephone: +47 908 15 987. Telefax: +47 38 01 10 25 See index of Products and Services:
INERT GAS SYSTEMS - Inert gas components, CO2 System groups: 376,819
MAS FLUID CONTROL ASEivind Lychesvei 19A, P.O. Box 336, 1301 Sandvika, NORWAY Telephone: +47 67 80 71 20. Telefax: +47 67 80 71 21 See index of Products and Services:
ALARM SYSTEMS - Alarm equipment System groups: 792
ENGINEERING - Engineering services
AUTOMATION - Control & automation systems System groups: 79
373_470_LF_2016.indd 423 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
424
MASTO WIRE SERVICE A/SCompany reg.no: 929942787 Nye Tegelverksvei 7B, P.O. Box 1615 Lundsiden, 4688 Kristiansand S, NORWAY Telephone: +47 38 09 70 50. Telefax: +47 38 09 70 53 e-mail: [email protected] Internet: www.masto.no HIGH PRESSURE WIRE ROPE LUBRICATORS Distribution for the world-wide shipping marked: Wilhelmsen Ships Service (Unitor) together with Masto Wire Service A.S. WIRE ROPE LUBRICATORS (high-pressure). For the shipping, offshore and industrial market. World-wide export Representative for UK: BRIDON INTERNATIONAL - CERTEX UK, Doncaster Tel.:+302/382496. Telefax: +302/382263 See index of Products and Services:
WIRE ROPE LUBRICATORS, HIGH PRESSURE - Lubricants System groups: 3,4
The Supplier is represented in the following countries:
AUSTRALIA CANADA GERMANY INDIA INDONESIA ITALY
SINGAPORE SPAIN SWEDEN UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES
MATRE MASKIN AS
Company reg.no: 936279198 5420 Rubbestadneset, NORWAY Telephone: +47-53 42 77 44 e-mail: [email protected] Internet: www.matre.no Company brochures and datasheets are available on the Internet. Sales: [email protected] Spareparts: [email protected] Technical support: [email protected]
373_470_LF_2016.indd 424 07.08.2016 11:47:10
425
DIRECTORY OF SUPPLIERS Matre is a well renowned provider of products, systems and services for the global maritime and offshore industry, focusing on firefighting solutions, calibrating equipment, pumps and machining services. Throughout the company’s 60 year long history we have placed great emphasis on quality, product development, flexible and reliable solutions, and designs that are tailor-made for each customer or project. This has resulted in a steady rate of innovations within our different product ranges. In Matre, high quality is our brand. Strict programs for testing and control, guided by a ISO 9001 certified quality assurance system, ensures that every delivery meets the current safety regulations, project specifications and the customers’ requirements. Selling our products to customers who place extremely high demands on accuracy and materials, we need to have the highest levels of expertise and the very best equipment. And we’re proud to say: We have both! Our highly dedicated professionals comprise engineering, mechanical and machine operation expertise, and many of our employees have years of invaluable experience. Matre was founded in 1953, in Bømlo at the west coast of Norway. Here, at the very heart of a major maritime cluster, with roots dating all the way back to the Viking era, the company has grown and evolved steadily. MATRE Firefighting Services: Matre provides a worldwide Field Service, comprising commissioning of new fire fighting equipment on board rigs and vessels, general maintenance of Matre equipment, annual inspections of DIFFS, maintenance of major deluges, as well as retrofits, conversions and modifications of existing helideck systems.In addition we also offer in-house repairs and services of Matre firefighting equipment at our facility in Bømlo. See index of Products and Services:
MACHINING SERVICE - Engineering services System groups: 6
FIRE FIGHTING SYSTEMS DIFFS / NUI - Firefighting equipment System groups: 819
NOZZLES - Fluid nozzles & mixing batteries System groups: 721
FIRE-FIGHTING EQUIPMENT PROPORTIONERS - Firefighting equipment System groups: 505
PUMPS - Pumps & pump units System groups: 3,6,7
373_470_LF_2016.indd 425 07.08.2016 11:47:10
DIRECTORY OF SUPPLIERS
426
MEDI 3 MARINE AS
Company reg.no: 941455077 Sundgata 12, 6003 Ålesund, P.O. Box 1514, 6025 Ålesund, NORWAY Telephone: +47-70 11 70 00. Telefax: +47-70 11 70 02 e-mail: [email protected] Internet: www.medi3.no Company brochures and datasheets are available on the Internet. Medical Safety at Sea THE SHIPMED CONCEPT - ACCORDING TO MLC 2006 The ShipMed Concept takes care of the medical safety on board, provides quality assurance of the operation of the ship’s hospital and increases the safety for those on board. The ShipMed Concept substantiates MLC 2006 which aimes to: “ensure that seafarers are given health protection and medical care as comparable as possible to that which is generally available to workers ashore, including prompt access to the neccessary medicines, medical equipment and facilities for diagnosis and treatment and to medical information and expertise”. Medi 3 ShipMed has developed innovative and functional hospital solutions to make sure the crew on board are taken as good care of as possible. Medi 3 ShipMed provides project planning, equipment and a safety system for managing the hospital on board.
373_470_LF_2016.indd 426 07.08.2016 11:47:10
427
DIRECTORY OF SUPPLIERS
See index of Products and Services:
EMERGENCY MEDICINE CARE - Hospital & medical equipment
MEDICINE CABINETS - Furniture & cabinets - Hospital & medical equipment
FIRST AID EQUIPMENT - Hospital & medical equipment
SHIP’S HEALTH SERVICE - Hospital & medical equipment
HEART STARTERS - Hospital & medical equipment
SHIP’S HOSPITALS - Hospital & medical equipment
MEDICAL EQUIPMENT - Hospital & medical equipment System groups: 504
SHIP’S MEDICINE - Hospital & medical equipment
MEDICAL EQUIPMENT, EMERGENCY - Hospital & medical equipment System groups: 504
373_470_LF_2016.indd 427 07.08.2016 11:47:11
DIRECTORY OF SUPPLIERS
428
MESON ASCompany reg.no: 984707592 Narverødveien 40, 3113 Tønsberg, NORWAY Telephone: +47 33 32 49 00. Telefax: +47 33 32 49 01 e-mail: [email protected] Internet: www.meson.se Company brochures and datasheets are available on the Internet. Manager: Malvin Hansen Meson together with its subsidiaries are one of the leading suppliers of marine valves and fittings in Europe. We deliver valves & fittings to customers world wide. Our foundries and workshops produce the quality brands MAB and MJ. Meson produces valves that meet the high demands from classification societies, ship yards and ship owners at an affordable price level. Quick response and deliveries are accomplished by experienced staff, ample warehousing and comprehensive logistic knowledge. Regardless of whether you need just one specific valve or a package of valves for a new ship we will provide the service. We stock DIN, JIS and ANSI valves. We also accommodate tailor made valves to your specification or mounting of an actuator. Since the start the Meson group have had an expansive and solid growth. Thank you for giving us the responsibility to handle your need for valves! If you are not already our customer, please contact us when you consider your next order. See index of Products and Services:
ACTUATORS - Pneumatic actuators System groups: 601,651,79
CHECK VALVES - Air & gas valves - Fluid valves & other armatures System groups: 309,513
ANSI VALVES - Air & gas valves - Fluid valves & other armatures System groups: 35
CONTROL VALVES - Air & gas valves - Fluid valves & other armatures System groups: 442,6,7
BALL VALVES - Fluid valves & other armatures System groups: 6,7
DIAPHRAGM VALVES - Air & gas valves - Fluid valves & other armatures
BUTTERFLY VALVES - Air & gas valves - Fluid valves & other armatures System groups: 57
FIRE VALVES - Air & gas valves - Firefighting equipment System groups: 57
373_470_LF_2016.indd 428 07.08.2016 11:47:11
429
DIRECTORY OF SUPPLIERS
GATE VALVES - Air & gas valves - Fluid valves & other armatures System groups: 513
SELFCLOSING VALVES - Air & gas valves - Fluid valves & other armatures
JIS VALVES - Air & gas valves - Fluid valves & other armatures
STEAM TRAPS - Evaporators, condensers and receivers System groups: 64
KNIFE GATE VALVES - Air & gas valves - Fluid valves & other armatures System groups: 72
STOP VALVES - Air & gas valves - Fluid valves & other armatures
MUDBOXES - Bins, baskets, boxes and containers
STRAINERS - Fluid filters
NEEDLE VALVES - Air & gas valves - Fluid valves & other armatures
VACUUM VALVES - Air & gas valves
SAFETY VALVES - Air & gas valves - Fluid valves & other armatures System groups: 73,75
VALVES - Air & gas valves - Fluid valves & other armatures System groups: 3,6,7
The Supplier is represented in the following countries: SWEDEN
373_470_LF_2016.indd 429 07.08.2016 11:47:11
DIRECTORY OF SUPPLIERS
430
METIZOFT ASCompany reg.no: 990346755 Eggesbøvegen 40, P.O. Box 104, 6099 Fosnavåg, NORWAY Telephone: +47 41 77 77 55 See index of Products and Services:
COMPLETION - Certification, QA and verification services - Documentation & data management System groups: 112
MED - MARINE EQUIPMENT DIRECTIVE - Certification, QA and verification services - Documentation & data management System groups: 112
GREEN PASSPORTS - Certification, QA and verification services - Documentation & data management System groups: 112
SENIOR MARINE ADVISERS - Administration, broking, finance & insurance services - Basic design & project development services - Certification, QA and verification services - Documentation & data management - Engineering services - Project management, construction management System groups: 112
IHM - INVENTORY OF HAZARDOUS MATERIALS - Certification, QA and verification services - Documentation & data management System groups: 112
373_470_LF_2016.indd 430 07.08.2016 11:47:11
431
DIRECTORY OF SUPPLIERS
MIROS ASCompany reg.no: 935450365 Solbraveien 20, Postboks 364, 1372 Asker, NORWAY Telephone: +47-66 98 75 00. Telefax: +47-66 90 41 70 See index of Products and Services:
OCEANOGRAPHICAL SYSTEMS - Subsea & seismic equipment System groups: 276
WAVE MONITORING SYSTEMS - Monitoring equipment System groups: 791
FIRE RATED WINDOWS - Fire protection & detection equipment - Watertight/weathertight doors & windows System groups: 515
WET UNITS - Accommodation modules System groups: 583
NORSAFE AS
Company reg.no: 940411696 P.O. Box 115, 4852 Faervik, NORWAY Telephone: +47-37 05 85 00. Telefax: +47-37 05 85 01 e-mail: [email protected] Internet: www.norsafe.com Company brochures and datasheets are available on the Internet. Norsafe develops, manufactures and supplies marine lifesaving systems for all types of ships and offshore installations and for military and professional use. As experts in the business of safety at sea, Norsafe has produced over 27 000 lifeboats since 1903. Norsafe’s worldwide involvement includes production, sales, delivery and service of lifesaving equipment. Norsafe headquarters is situated in Arendal, Norway. Production facilities, sales and service companies are located in Norway, China, Greece, Mexico, Singapore, South Korea, Australia, the USA, Japan, Brazil, the Netherlands and the United Arab Emirates, supporting our worldwide customers. The Norsafe Group counts 1100 employees and is fast expanding.
373_470_LF_2016.indd 432 07.08.2016 11:47:11
433
DIRECTORY OF SUPPLIERS
Norsafe offers 24/7 service for Life Saving Appliances through an international service network comprising 45 authorised service partners spread across all continents (phone: +47 37 05 63 33). Norsafe Academy offers operational and maintenance courses and training, STCW95/OLF & OPITO. For further information, visit our website: norsafe.com and youtube.com/norsafeas World-leading manufacturer of: . Free-fall lifeboats . Conventional lifeboats . Fast rescue boats . Daughter craft . Work boats . Professional boats . Military boats . Davit systems World-leading provider of: . New lifesaving equipment . Commissioning . Technical support . 24/7 service (phone: +47 35 05 63 33) . Mandatory annual and 5 yearly inspections . Fleet Service Agreements (FSA) . Spare parts . Upgrades/refits according to latest regulations . Re-hooking . Training through Norsafe Academy, STCW95/OLF & OPITO . Return and recycling of outdated lifeboat systems NORSAFE’s DAUGHTER COMPANIES: Norsafe AS Tybakken 90, N-4852 Faervik NORWAY Tel: +47 37 05 63 33 - Fax: +47 37 06 27 51 [email protected] Norsafe Australia Pty Ltd. 1 / 4 Monash Gate, Jandakot 6164 WESTERN AUSTALIA Tel: +61 8 9414 7477 - Fax: +61 8 9414 7488 Norsafe Årsnes AS Årsnes Industriområde, N-5474 Rosendal NORWAY Tel: +47 37 05 63 74 - Fax: +47 53 48 91 51 [email protected]
Norsafe Marine & Offshore 1301 Edwards Avenue, Suite B, Jefferson LA 70123 USA Tel: +1 504 733 0100 - Fax: +1 504 733 0155 [email protected] Norsafe UK Aberdeen Business Centre Bon Accord Crescent, Aberdeen AB11 6DE Tele +44 (0) 1224 502580 [email protected] Norsafe Brazil Rua José Cardoso da Silva, No. 300, Centro, Zip code: 28.800-000, Rio Bonito, RJ - Brasil. Tel: + 55 21 2734 3322 [email protected] See index of Products and Services:
DAUGHTER CRAFTS - Lifeboats/rafts & other boats System groups: 501
LIFEBOATS - Lifeboats/rafts & other boats System groups: 501
DAVITS - Davits and masts System groups: 501,502
MILITARY & PROFESSIONAL - Lifeboats/rafts & other boats System groups: 501
FREE FALL LIFEBOATS - Lifeboats/rafts & other boats System groups: 501
RESCUE BOATS - Lifeboats/rafts & other boats System groups: 501
HOOK SYSTEMS - Safety equipment System groups: 503
WORKBOATS - Lifeboats/rafts & other boats System groups: 501
373_470_LF_2016.indd 435 07.08.2016 11:47:11
DIRECTORY OF SUPPLIERS
436
The Supplier is represented in the following countries:
ARGENTINA AUSTRALIA BRAZIL CROATIA CYPRUS EGYPT FRANCE GERMANY GREECE INDIA IRAN ITALY KOREA, SOUTH MALAYSIA
NETHERLANDS, THE NEW CALEDONIA NIGERIA PORTUGAL QATAR RUSSIA SOUTH AFRICA SPAIN SWEDEN TURKEY UNITED STATES VENEZUELA VIETNAM
NORSAP ASCompany reg.no: 919405619 Mjåvannsveien 45/47, 4628 Kristiansand, NORWAY Telephone: +47-38 18 52 00 See index of Products and Services:
PILOT CHAIRS - Bridge inventory & equipment System groups: 542
373_470_LF_2016.indd 436 07.08.2016 11:47:11
437
DIRECTORY OF SUPPLIERS
NYBORG A/SCompany reg.no: 952783297 Haugsetveien 72, 6230 Sykkylven, NORWAY Telephone: +47-70 25 40 80. Telefax: +47-70 25 29 08 See index of Products and Services:
AXIAL FANS - Fans System groups: 57
GAS FREEING FANS - Fans System groups: 57
CENTRIFUGAL FANS - Fans System groups: 57
MIST ELIMINATOR LOUVERS - Fans System groups: 57
DAMPERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 109,33,40
SILENCERS - Exhaust components & silencers System groups: 743,744
DECK MOUNTING FANS - Fans System groups: 57
VENTILATION COWLS - AC units, air dryers, air cooling and heating components System groups: 316
FANS - Fans System groups: 57
VENTILATION EQUIPMENT - AC units, air dryers, air cooling and heating components System groups: 37,57
FANS, EXPLOSION PROOF - Fans System groups: 897
373_470_LF_2016.indd 437 07.08.2016 11:47:11
DIRECTORY OF SUPPLIERS
438
OPTIMARIN AS
Company reg.no: 970942327 Sjøveien 34, 4315 Sandnes, NORWAY Telephone: +47 51 11 45 33. Telefax: +47 51 12 31 03 e-mail: [email protected] Internet: www.optimarin.com Company brochures and datasheets are available on the Internet. Optimarin AS was founded in 1994 in Stavanger, a town along the west coast of Norway and we were one of the first companies in the world to develop a system for environmentally friendly purification of ballast water. Although we recognized that there were various methods for purifying ballast water, both chemical and environmentally friendly methods, we chose to pursue a solution that does not use any chemicals and leaves no residual products that are harmful to the ocean or the environment. In the year of 2000 we were honored by installing the world’s first ballast water treatment system on board the cruise ship Regal Princess. After several years of testing, developing and patenting new technology, we finally obtained type approval for the Optimarin Ballast System in 2009, in accordance with Guideline 8 and the ‘International Convention for the Control and Management of Ships’ Ballast Water and Sediments, 2004’. The Optimarin Ballast System (OBS) uses approved technology that significantly exceeds the stringent requirements set out in the IMO Convention. But for Optimarin, it is not enough to simply be approved. We operate in accordance with ISO 9001 / 2008 and our vision is to have the most environmentally friendly ballast water purification system in the world. See index of Products and Services:
BALLAST SYSTEMS - Purification plants & fluid treatment System groups: 801
FILTERS - Fluid filters System groups: 584,6
CONTROL SYSTEM - Control & automation systems
UV SYSTEM - Purification plants & fluid treatment System groups: 801
The Supplier is represented in the following countries:
ARGENTINA BRAZIL CHINA CROATIA CYPRUS DENMARK GREECE INDIA ISRAEL ITALY
KOREA, SOUTH NETHERLANDS, THE PORTUGAL SINGAPORE SPAIN SWEDEN TAIWAN TURKEY UNITED STATES
373_470_LF_2016.indd 438 07.08.2016 11:47:11
439
DIRECTORY OF SUPPLIERS
OPTIMERA AS - MARINE DIV.Industrivegen 26, 6155 Ørsta, NORWAY Telephone: +47 47 64 80 00 See index of Products and Services:
CHIPBOARD - Other materials System groups: 27,28
PLYWOOD - Other materials System groups: 27
GYPSUM BOARD - Other materials System groups: 27,28
Company reg.no: 960256778 Hegrenesveien 17A, 5042 Bergen, NORWAY Telephone: +47 55 33 36 50. Telefax: +47 55 33 36 51 e-mail: [email protected] Internet: www.palfingermarine.com Company brochures and datasheets are available on the Internet. PALFINGER MARINE NORWAY AS is the global leading manufacturer of highly reliable, innovative and customised deck equipment and handling solutions for the maritime industries. LIFETIME EXCELLENCE is our promise. For PALFINGER MARINE NORWAY customers, this means excellence without compromise and reliable, economical solutions from a global network of skilled service partners - the entire product life cycle. See index of Products and Services:
Company reg.no: 986908277 Tjørsvågstrand 27, P.O. Box 173, 4402 Flekkefjord, NORWAY Telephone: +47-99 48 55 00. Telefax: +47-38 32 44 71 e-mail: [email protected] Internet: www.parat.no Company brochures and datasheets are available on the Internet. Steam and Heat solutions from a world class boiler manufacturer! Parat Halvorsen is an engineering and manufacturing company with strong roots. It was first established in 1842 and has been a significant supplier to the boiler industry ever since. With a total of close to 9.000 deliveries to the Marine, Offshore and industry markets since the beginning we have established a solid base of expertise. The factory and head office is situated in the city of Flekkefjord on the south coast of Norway, just two hours from the Offshore capital of Stavanger.
373_470_LF_2016.indd 440 07.08.2016 11:47:11
441
DIRECTORY OF SUPPLIERS
Today we still focus on tailor made steam and heat systems for both industrial and marine/offshore applications. We never compromise on quality and have a strong customer focus. For us there are no problems, only challenges and we take pride in being able provide solutions to all our customers demands, both great and small. We supply turn key solutions for most processes that require large amounts of heat input and our skilled and experienced engineering staff work hard to meet even the strictest requirements. We produce a vast range of steam and heat systems ranging from 100kW to 50.000kW output. To maintain our competitiveness we have established partnerships in Korea enabling us to be closer to the Asian shipyards and to keep our manufacturing and shipping costs as low as possible. Parat Halvorsen is once again strengthening the service and after sales department to be able to serve a growing demand for our expertise. By using an efficient team of skilled multidiscipline boiler technicians we have seen that we can perform complete modification or repair assignments very quickly and thereby save a great amount of costs for the vessel owner. Our teams are also fully certified to do sailing jobs around the world. On the product side we are working on various improvements of existing technology. We are also continuously developing customer optimized products to serve a changing market where the focus on lower emissions and improved fuel economy is becoming more and more important all over the globe. By focusing on maximum heat recovery from engines and generators and integrating electrical heaters in the exhaust gas boilers we are able to provide customized and fully optimized turnkey packages to any client who is focusing on long term benefits. For the offshore segment we are still delivering a great amount of heating systems for Oil Spill Response vessels. Our specialized Parat ORO system ensures that any recovered oil is kept sufficiently viscous during transport to shore offloading and processing (see enclosed whitepaper). For rigs and FPSO we provide complete turnkey packages for topside heating medium systems, tank heating systems and also for marine support systems like hot water service packages. Here we also focus strongly on sustainability and space optimization, ensuring that the end client gets the most cost efficient and stable operation possible utilizing the absolute minimum of space on deck or in the engine room areas. Parat Halvorsen prides itself in being a most innovative supplier of systems to any process that requires heat input. We constantly strive to find the most optimal solution to our customers demand, and have a special focus on sustainable and long lasting systems that give the end user the most cost efficient process. A typical example for a modern commercial vessel is to utilize as much of the waste energy as possible often in combination with integrated electrical heaters to ensure maximum redundancy and minimum fuel consumption. Main solutions: High Voltage Electrode Boiler, Low Voltage Electric Boiler, ORO Tank Heating, Oil Fired Smoke Tube Boiler, Exhaust Gas Water Tube Boiler, District Heating System, Waste-to-Energy, Economizer, Degasser, Feedwater Tank, Service, Maintenance, Worldwide, ASME, U-Stamp, S-Stamp, NOFO, Marine, Offshore, Industry, Oil Spill Response, Heat Exchangers, Boiler Repair Service, Retubing Certificates: ISO9001, DNV, Lloyds, ASME U-Stamp, ASME S-Stamp, CEN, ABS, Achilles etc.
373_470_LF_2016.indd 441 07.08.2016 11:47:11
DIRECTORY OF SUPPLIERS
442
See index of Products and Services:
BOILER REPAIRING - Machinery and piping work System groups: 64
HIGH VOLTAGE ELECTRODE BOILERS - Boilers, burners and incinerators System groups: 64
BOILERS - Boilers, burners and incinerators System groups: 64
HOT WATER BOILERS - Boilers, burners and incinerators System groups: 445,577,641,841
CENTRAL HEATING BOILERS - Boilers, burners and incinerators System groups: 577
MAIN BOILERS - Boilers, burners and incinerators System groups: 61
DONKEY BOILERS - Boilers, burners and incinerators System groups: 644
STEAM BOILERS - Boilers, burners and incinerators System groups: 64,641,644
ELECTRICAL CIRCULATION STEAM BOILERS - Boilers, burners and incinerators System groups: 577,641,841
HIGH TEMP/HIGH VISCOCITY SYSTEMS - Control & automation systems System groups: 3,35
TANK CLEANING MACHINES - Tank cleaning equipment System groups: 382
HYDRAULIC POWER PACKS - Hydraulic plants & equipment System groups: 3
PLANY AS
Company reg.no: 918346651 Haugsbygda, 6082 Gursken, NORWAY Telephone: +47 70 02 68 20. Telefax: +47 70 02 68 21 e-mail: [email protected] Internet: www.plany.no Company brochures and datasheets are available on the Internet. Established: 1964 Pla-Ny was established in 1964. Since that we have developed to become one of the leading actors in the field of canvas and tarpaulin products in Norway. Canvas and tarpaulin products for: - Shipyards - MOB boats - Aquaculture
373_470_LF_2016.indd 444 07.08.2016 11:47:11
445
DIRECTORY OF SUPPLIERS
See index of Products and Services:
CANVAS PRODUCTS - Scaffolds, jigs & tarpaulins etc. System groups: 316
TARPAULINS - Scaffolds, jigs & tarpaulins etc. System groups: 316
RESTECH NORWAY A/SCompany reg.no: 951274763 Olav V gt 112, P.O. Box 624, 8001 Bodø, NORWAY Telephone: +47-75 54 24 40 See index of Products and Services:
LINE THROWING APPARATUS - Lifesaving equipment System groups: 503
Company reg.no: 911781174 Brobekkvn. 84, P.O. Box 216 Alnabru, 0614 Oslo, NORWAY Telephone: +47-22 88 77 00. Telefax: +47-22 64 54 54 e-mail: [email protected] Internet: www.weber-marine.com Company brochures and datasheets are available on the Internet. ACCREDITED WEBER MARINE FLOOR CONTRACTORS: Quality Assured application by Accredited Weber Marine Floor Contractors When proposing high quality products and solutions, it is always one subject which is very important in addition to the product itself - the installation. Weber Marine floors shall always be supplied in the exact quality as agreed and in terms of function, strength, durability, surface, flexibility and so on. This is the reason why our Marine Floor Products, Systems and Concepts are applied by Accredited Weber Marine Floor Contractors (AWMFC). Weber teach and train our contractors to perform an excellent quality to the clients’ satisfaction. The contractors are regularly re-certified by Weber to receive the latest information concerning developments of products and
373_470_LF_2016.indd 445 07.08.2016 11:47:11
DIRECTORY OF SUPPLIERS
446
concepts. For the end-user this means quality assured installation of Weber Marine Floors that is performed according to the Weber installation instructions. All stages in the Marine Flooring application are crucial for the final result. Therefore, we have introduced a quality assurance (QA) procedure to be followed by Weber and our Accredited Weber Marine Floor Contractors. The control consists of: . Quality Control of raw materials . Production control - ISO 9001/14001 . Quality Control of finished product . Product certificate . AWMFC consignment control . AWMFC Quality Control . Quality Assurance of finished floor Certified contractors by Weber are Accredited Weber Marine Floor Contractors (AWMFC) and perform all types of marine floor installations. Our contractors are: . Experienced, skilled and educated . Trained and approved by Weber . Theoretical and practical training . Independent local companies in close cooperation with Weber Training can be performed either in Weber’s own premises or at a feasible location selected by the contractor and can be arranged upon request. For new Weber Marine Floor Contractors Weber will, if requested, assist with technical support during the first installations of marine floors. WEBER - PUMPABLE SELF-LEVELLING MARINE FLOOR CREEDS AND FLOORING SYSTEMS Weber is a world-leading producer of marine flooring systems. Their range of flooring systems includes the Marine Deck, Marine A-60 Floor, Marine dB A-60 Floor and Marine dB-Floor. Weber was at the vanguard of developing pumpable, self-levelling floor screed products that offer the ability to create seamless high-performance floors at previously unachievable speeds. Present in 30 countries worldwide, 30 years’ experience has so far seen the company supply over one million m² of flooring. WEBER PREMIX RANGE - PUMPABLE FLOOR SCREEDS Weber marine flooring systems are built layer by layer to provide the optimum solution for each individual client’s requirement. Pumpable self-levelling floor screeds allow you to achieve the flattest, smoothest and thinnest floors possible, performing to exacting standards even in highly testing environments. They are pre-mixed at the manufacturing plant, and boast the following benefits:
373_470_LF_2016.indd 446 07.08.2016 11:47:11
447
DIRECTORY OF SUPPLIERS
- Factory blending ensures consistent quality - Machine mixing guarantees optimum consistency - Choice of delivery in bags, bulk or pump trucks - Pumpable form minimises down time and enhances ergonomics - Rapid drying time means floors are walkable after one to three hours - Up to 300m² to 500m² can be covered per hour - High strength / low thickness mix minimises loss of floor to ceiling height - Self-compacting and self-levelling; ready to surface finish after one to three days - Marine flooring systems only installed by accredited Weber contractors MARINE DECK AND SOUND-INSULATED FLOOR SYSTEMS Weber produce a number of floor systems to meet different needs. These include: - Weber Marine Deck: Flexible, durable pumpable floor screed system for steel decking; low construction height - Weber Marine dB A-60 Floor: Det Norsk Veritas (DNV) A-60 approved; recommended for ships and oil platforms requiring fire-insulated constructions, where materials must be non-combustible under International Maritime Organisation (IMO) rules - Weber Marine Light dB Floor: Flexible, durable, pumpable screed system for steel decking; low construction height and structure-borne sound insulation - Weber Marine dB Floor: Designed for ships and oil platforms that require sound-insulation; effective against airborne, impact and structure-borne sound CERTIFICATION AND APPROVALS Weber marine products satisfy the requirements of the leading classification societies and authorities. All Weber marine flooring systems are manufactured according to ISO9001 quality standards, and to ISO 14001 environmental management systems and standards. All self-levelling compounds are approved by DNV. See index of Products and Services:
DECK SELFSMOOTHING SCREED - Interior floor, wall & ceiling covers - Sections, foundations, pillars, structural units and bulkheads System groups: 524
INTERIOR FLOORS - Interior doors & windows System groups: 109,51,512,513,514,515
INSULATION - Insulation System groups: 51,52
373_470_LF_2016.indd 447 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
448
SCANA MAR-EL ASCompany reg.no: 914192137 Storvegen 48, 3880 Dalen, NORWAY Telephone: +47-35 07 58 00 See index of Products and Services:
CONTROL SYSTEMS - Control & automation systems System groups: 79
PROPULSION CONTROL SYSTEMS - Control & automation systems System groups: 40
EMERGENCY TELEGRAPH - Safety equipment System groups: 503
STEERING GEARS - Steering equipment & stabilizers System groups: 403
JOYSTICK CONTROL SYSTEMS - Control & automation systems System groups: 403,63,791
THRUSTER REMOTE CONTROL, ELECTRONIC - Control & automation systems System groups: 381,79
SCANA SKARPENORD AS - RJUKANCompany reg.no: 937773609 Såheimsveien 2, P.O. Box 3, 3660 Rjukan, NORWAY Telephone: +47-35 09 18 00. Telefax: +47-35 09 18 01 See index of Products and Services:
VALVE EQUIPMENT - Air & gas valves - Fluid valves & other armatures System groups: 442
HYDRAULIC CONTROLS - Control & automation systems System groups: 403,43,634
VALVE REMOTE CONTROL SYSTEM - Control & automation systems System groups: 381,79
HYDRAULIC SYSTEMS - Hydraulic plants & equipment System groups: 83
373_470_LF_2016.indd 448 07.08.2016 11:47:12
449
DIRECTORY OF SUPPLIERS
SEAGULL MARITIME ASGamleveien 36, P.O. Box 1062, 3194 Horten, NORWAY Telephone: +47 33 03 0910. Telefax: +47 33 04 62 79 See index of Products and Services:
MANAGEMENT SYSTEMS - Documentation & data management System groups: 109
SOFTWARE - Onboard software System groups: 109
SERVOGEAR A/SCompany reg.no: 980414159 Brubakken 73, 5420 Rubbestadneset, NORWAY Telephone: +47-53 42 39 50 See index of Products and Services:
GEARS - Gears System groups: 637,638
PROPULSION SYSTEMS - Combustion engine - Propellers & impellers System groups: 60,601,61,62
PROPELLERS - Propellers & impellers System groups: 63
SIEMENS AS, MARINE & SHIPBUILDING
Bratsbergveien 5, 7037 Trondheim, NORWAY Telephone: +47 815 365 24 e-mail: [email protected] Internet: www.siemens.no/marine Life Cycle Management E-mail: [email protected] On-call 24 hours Phone: +47-815 365 24 Siemens has been around for more than 160 years and is among the world’s major suppliers to the shipping market. Siemens can provide a wide range of excellent and first class solutions and products. Our goal is to deliver safe, environmentally and profitable solutions. As a supplier, Siemens is able to create a long-running cooperation with ship owners to reduce vessel life-cycle costs and at the same time help the yards to be more competitive. Our solutions ensure operational benefits and give a strong contribution to lower fuel consumption and reduced
373_470_LF_2016.indd 449 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
450
emission of harmful greenhouse gases. At Siemens you will get all Components from the same manufacturer. Siemens Marine & Shipbuilding supports ship owners globally and sell our solutions through Siemens’ worldwide network. Unique products and solutions for all kind of ships have been developed from our research and production facilities in Norway in cooperation with Siemens AG in Germany. Complete system solutions. Trend setting competence. Worldwide service network. See index of Products and Services:
ALARM SYSTEMS - Monitoring equipment System groups: 381,40,79,792,793,795,85,87,875
AUTOMATION SYSTEMS - Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381,40,79,793,795,85,87,875
MAIN SWITCHBOARDS - Switchboards & relays System groups: 871,872,875,89
373_470_LF_2016.indd 450 07.08.2016 11:47:12
451
DIRECTORY OF SUPPLIERS
CONTROL AND MONITORING SYSTEMS - Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381,40,79,793,795,85,87,875
POWER SUPPLIES - Alarm equipment - Centrals, consoles & panels - Control & automation systems - Meters & indicators - Monitoring equipment - Regulators & switches - Sensors, gauges & detectors - Switchboards & relays System groups: 79,791,792,793,795,85,86
ELECTRIC MOTORS - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,867,898
PROPULSION SYSTEMS - Combustion engine - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears - Propellers & impellers System groups: 40,60,601,61,62,637,638,65,793,795
FREQUENCY CONVERTERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,79,85,867,898
SENSORS AND INSTRUMENTS - Alarm equipment - Control & automation systems - Monitoring equipment System groups: 381,40,79,792,793,795,85,87,875
GEARS AND TRANSMISSIONS - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,637,638,867,898
STARTERS - Control & automation systems - Converters (voltage, frequency), receivers, el. dampers and rectifiers - Electrical motors & starters - Gears System groups: 62,79,85,867,898
GENERATORS - Aggregates - Control & automation systems - Generators, alternators & dynamos System groups: 861,87,871,872,875,89,898
TRANSFORMERS - Converters (voltage, frequency), receivers, el. dampers and rectifiers System groups: 865
373_470_LF_2016.indd 451 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
452
SIMRAD ASStrandpromenaden 50, 3190 Horten, NORWAY Telephone: +47 33 03 40 00. Telefax: +47 33 04 29 87 See index of Products and Services:
ECHO SOUNDERS - Detection & identification equipment System groups: 414
SOTRA ANCHOR & CHAIN AS
Company reg.no: 979912722 Gamle Vindenesveg 11, 5363 Ågotnes, NORWAY Telephone: +47-56 32 68 50. Telefax: +47-56 32 68 60 e-mail: [email protected] Internet: www.sotra.info Sotra Anchor & Chain / Sotra Marine Produkter AS is a company 100 % owned by The SOTRA GROUP. The group was founded in 1980 at Sotra on west coast of Norway. SOTRA ANCHOR & CHAIN has become known as the world`s largest stockist of anchors and chains. The company have today more than 10 000 tonnes brand new and second hand anchors, chain, shackles and accessories for supply within shipping, offshore, aquaculture, shipyards and even to decoration market. The company still have main office and main yard in Norway, but have also established yards in Scotland, The Netherlands and in China. From these yards the company supply anchors and chains to hundreds of ships, offshore drilling rigs, fishfarms and new buildings every year. Although ever increasing order volume, the organisation is small and manage to offer all our customer the best of service. Our staff are able to load and delivery immediate upon order and can make delivery 24 hours a day, 7 days per week if required. Our staff is always available to offer service to all our customer when required.
373_470_LF_2016.indd 452 07.08.2016 11:47:12
453
DIRECTORY OF SUPPLIERS
We have ancors and chains both for sales and rental. See index of Products and Services:
ANCHOR CHAINS - Chains, wires & ropes System groups: 431
MOB BOATS - Lifeboats/rafts & other boats System groups: 501
SPERRE INDUSTRI ASCompany reg.no: 961479142 Ellingsøyvegen 740, 6057 Ellingsøy, NORWAY Telephone: +47 70 16 11 00 See index of Products and Services:
CASTINGS - Other materials System groups: 196
COOLERS - Cooling components for fluids System groups: 362,7
COMPRESSORS - Compressors System groups: 73
373_470_LF_2016.indd 453 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
454
STADT AS
Company reg.no: 984021887 Moloveien 2, 6083 Gjerdsvika, NORWAY Telephone: +47 70 02 58 00 e-mail: [email protected] Internet: www.stadt.no Company brochures and datasheets are available on the Internet. For 30 years, STADT has developed, manufactured and installed AC motor-drives, process controls and integrated electric propulsion systems for ships. STADT has always been focusing on development of SUSTAINABLE SOLUTIONS that will have a positive impact on the environmental issues in a global scale. STADT has recently signed several contracts for various ships to use the STADT STASCHO full electric ship propulsion system, and has gained major experience with the system during the project MV “Sanco Star”, delivered in 2008. STADT is a supplier of totally integrated electric systems, including generators, switchboards, motor drives / inverters, power management systems, integrated alarm and monitoring systems, electric motors and DP systems etc. See index of Products and Services:
AC DRIVES - Electrical motors & starters System groups: 62,651,7
INTEGRATED ELECTRIC PROPULSION SYSTEMS - Power generation, propulsion & manouvering System groups: 62,651,7
373_470_LF_2016.indd 454 07.08.2016 11:47:12
455
DIRECTORY OF SUPPLIERS
STAR INFORMATION SYSTEMS ASCompany reg.no: 979176848 Kjøpmannsgaten 35, 7011 Trondheim, NORWAY Telephone: +47-73 87 62 00 See index of Products and Services:
COMMUNICATION - Other communication equipment System groups: 42
INSURANCE SYSTEMS - Engineering software (CAD, analysis) System groups: 11
COMPUTER SYSTEMS - Computer hardware - Onboard software System groups: 542
MAINTENANCE MANAGEMENT - Maintenance, spare parts and supplies - Onboard software System groups: 109
DOCUMENT CONTROL - Documentation & data management - Engineering software (CAD, analysis)
PURCHASING SYSTEMS - Construction/fabrication software System groups: 109
E-COMMERCE - Engineering software (CAD, analysis)
SAFETY MANAGEMENT SYSTEMS - Onboard software - Safety equipment
EDUCATIONAL MATERIAL - Documentation & data management System groups: 112
SHIPPING MANAGEMENT - Project management, construction management
SPARE PARTS SYSTEMS - Documentation & data management System groups: 109
373_470_LF_2016.indd 455 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
456
TAMROTOR MARINE COMPRESSORS ASCompany reg.no: 976516648 Prof. Birkelands vei 24D, P.O.Box 3 Furuset, 1001 Oslo, NORWAY Telephone: +47 22 91 85 00. Telefax: +47 22 91 84 93 See index of Products and Services:
ADSORPTION DRYERS - AC units, air dryers, air cooling and heating components System groups: 73
FILTERS - Air filters & spark arresters System groups: 73
AIR DRYERS - AC units, air dryers, air cooling and heating components System groups: 57
SCREW COMPRESSORS - Other air/gas/pneumatic equipment System groups: 73
COMPRESSORS - Compressors System groups: 73
TEAMTEC A/S
Company reg.no: 974388472 Nyvei 41, P.O. Box 203, 4902 Tvedestrand, NORWAY Telephone: +47 37 19 98 00 e-mail: [email protected] Internet: www.teamtec.no TeamTec is a world leading manufacturer of marine incinerators and stripping ejectors. TeamTec provides high-tech design, production and documentation, and is known worldwide for superior quality, high flexibility and short delivery time. TeamTec adheres to environmentally sound solutions, and the technical specifications of the products are in compliance with existing requirements and regulations. TeamTec and Evonik Resource Efficiency GMBH have signed a cooperation agreement. Since February, 2016 TeamTec has taken over the manufacture, sales and service of the AVITALIS T BWTS. A filter and chemical injection system that ensures complete and environmentally benign BW cleaning in any temperature, salinity and turbidity. The TeamTec Incinerators ensure safe and efficient waste management, which complies with the IMO regulations for both waste oil and solid waste incineration. TeamTec’s bilge water injection solutions for incinerators were launched in 2009, in order to reduce operating costs of bilge water separators and to meet the stricter regulations for discharge. TeamTec supplies incinerators for the marine and offshore market, as well as for land based activity; i.e. power plants, mining and holiday resorts.
373_470_LF_2016.indd 456 07.08.2016 11:47:12
457
DIRECTORY OF SUPPLIERS The TeamTec Stripping Ejectors are liquid jet pumps driven by water or oil supplied from conventional pumps. The ejectors are superior for all-purpose stripping and have become an important part of the standard equipment on modern new buildings. TeamTec also offers a variety of ejector types and products, and has a flexible in-house casting and production. TeamTec provides comprehensive after sales service for TeamTec’s products worldwide. TeamTec guarantee customers prompt and professional service with maximum cost-effectiveness. See index of Products and Services:
BALLAST WATER TREATMENT SYSTEM - Purification plants & fluid treatment System groups: 801
INCINERATORS - Boilers, burners and incinerators - Maintenance, spare parts and supplies System groups: 445
EJECTORS - Ejectors - Maintenance, spare parts and supplies System groups: 356
The Supplier is represented in the following countries:
ARGENTINA AUSTRALIA BRAZIL BULGARIA CANADA CHINA FRANCE GERMANY GREECE HONG KONG INDIA INDONESIA ITALY JAPAN KOREA, SOUTH
MALDIVES NETHERLANDS, THE NIGERIA POLAND ROMANIA RUSSIA SINGAPORE SPAIN SRI LANKA TAIWAN TURKEY UNITED ARAB EMIRATES UNITED STATES VIETNAM
373_470_LF_2016.indd 457 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
458
TEKNOTHERM MARINE A/S
Company reg.no: 996386805 Sørliveien 90-92, 1788 Berg i Østfold, P.O. Box 87, 1751 Halden, NORWAY Telephone: +47-69 19 09 00. Telefax: +47-69 19 09 01 e-mail: [email protected] Internet: www.teknotherm.com Company brochures and datasheets are available on the Internet. Established: 2011 General manager: Roy Moberg Office Ålesund: Kalvøyvegen 20, N-6014 Ålesund Tel.: +47-70 10 71 50. Telefax: +47-70 10 71 51. Subsidary company Norway: Teknotherm-Therma Tromsø AS Stakkevollveien 12, N-9010 Tromsø Tel.: +47 77 61 11 00. Subsidary company Sweden: Teknotherm Refrigeration AB Marieholmsgatan 10B, SE-41 502 Gothenburg, Sweden Tel.: +46-31 217 500. Telefax: +46-31 217 500. Subsidary company Poland: Teknotherm Marine HVAC Ul. Wyspianskiego 51, PL-70 479 Szczecin, Poland Tel.: +48-49 433 18 00. Telefax: +48-49 422 18 01. Subsidary company Russia: Teknotherm Marine HVAC - Repr. Office Korablestriteley dom 32, Korpus 1, Office 35N, RU-199 397 St. Petersburg, Russia Tel.: +7 812 946 9954. Subsidary company Turkey: Teknotherm Marine HVAC - Repr. Office Yala Mah. Vatan Cad. Meka is Merkezi, No: 58/15, Tuzla/Istanbul, Turkey Tel.: +90 533 332 83 97. Subsidiary company China: Teknotherm Refrigeration Wuxi Co. Ltd. No. 19-8, Xingchuang #4 Road, Wuxi Singapore Ind. Park, Jiangsu Province, P.R China Tel.: +86-510 8528 1763. Telefax: +86-510 8528 2537. Teknotherm Marine AS has a history dating back to 1926 as a designer, contractor, and manufacturer of marine-, offshore- and industrial refrigeration systems. Through all these years we have had close contact with our customers in the marine-, offshore- and industrial environment, learning their needs and meeting the special requirements demanded by the industry. The
373_470_LF_2016.indd 458 07.08.2016 11:47:12
459
DIRECTORY OF SUPPLIERS
experience gained has been incorporated into our products, and made Teknotherm Marine a highly competent supplier of marine- offshore- and industrial installations. Being a customizer, always in response to the specific needs of our customers, has made Teknotherm Marine a flexible company, responding to rapid changes. It has also made the organization alert to new trends and fashions in the industry which puts the company in the front line of development. The company delivers complete cooling installations of own production and own design to: -Merchant fleet -Fishing fleet -Offshore industry -Industrial industry The company also delivers various refrigeration components for freezing systems and heat exchangers. See index of Products and Services:
AIR CONDITIONING - AC units, air dryers, air cooling and heating components System groups: 57
FREEZING SYSTEMS - AC units, air dryers, air cooling and heating components System groups: 57
CARGO REFRIGERATION - Cargo handling equipment System groups: 3
PROVISION STORAGE - Galley, pantry equipment and whiteware System groups: 552
COMPRESSORS - Compressors
REFRIGERATION, SPARE PART - AC units, air dryers, air cooling and heating components System groups: 362,554
CONDENSERS - Evaporators, condensers and receivers
RSW SYSTEMS - Cargo handling equipment System groups: 32
COOLING SYSTEMS - AC units, air dryers, air cooling and heating components System groups: 362,554
373_470_LF_2016.indd 459 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
460
The Supplier is represented in the following countries:
CHILE CROATIA FINLAND GREECE NETHERLANDS, THE
POLAND RUSSIA SOUTH AFRICA TURKEY UNITED KINGDOM
THERMAL TEC ASKurudvegen 55, 2322 Ridabu, NORWAY Telephone: +47 62 58 59 30 See index of Products and Services:
ELECTRIC HEATED SYSTEMS - Electrical heating System groups: 88
EXHAUST GAS BOILERS - Boilers, burners and incinerators System groups: 577,64,841
TANK HEATING SYSTEMS - Electrical heating System groups: 57
GENERATOR SYSTEMS - Generators, alternators & dynamos System groups: 196,40
TRANBERG A.S.
Company reg.no: 986926909 Strandsvingen 6, Gausel, P.O. Box 8033, 4068 Stavanger, NORWAY Telephone: +47-51 57 89 00. Telefax: +47-51 57 89 50 e-mail: [email protected] Internet: www.tranberg.com Company brochures and datasheets are available on the Internet. Tranberg AS has since 1901 designed, manufactured and supplied high quality electromechanical products for use on ships and offshore installations. Experienced engineering skills and flexible production capabilities are vital in order to adapt to rapidly changing demands. The company is also continuously updated to changes in national and international safety and environment regulations and the Quality Management System has been ISO 9001-certified since 1995. Tranberg offers a wide range of high quality products: -Navigation and Signal Lights and Control Panels -Luminaires, Searchlights and Floodlights -Heavy Duty Switches, Sockets and Connectors -Windsocks and Deck Lights for Helicopter Landing Areas -Junction Boxes and Control Stations in Stainless Steel 316L and Brass
373_470_LF_2016.indd 460 07.08.2016 11:47:12
461
DIRECTORY OF SUPPLIERS
-Thermostats and Special Components for Heat Tracing and Instrument heating -Cable Glands and Adaptors -Trace Heating, Instrument Heating and Process Heating -Electrical De-Ice / Winterization Our main markets are the International Marine and Oil & Gas related Industry. Tranberg Navigation Lighting Systems, as Navigation Lights, Signal Lights, and Navigation/Signal Light Controllers, comply with all relevant COLREG, SOLAS and IEC regulations/norms, and are additional to this, certified by DNV (Det Norske Veritas) according to COLREG 72 and DNV Rules for Classification of Ships. The company’s Quality Management System is certified according to ISO9001:2008 by Dekra. Our production holds production quality assurance notification for ATEX and IECEx and Quality assessment according to “Forskrift om skipsutstyr” ( Directive 2009/26/EC). Products manufactured for hazardous areas are all Atex-certified by Nemko or DNV. Addition to this range of quality products, Tranberg also provides complete solutions for electrical heating of industrial process, within Oil & Gas-, Refineries-, and other Process Industries. See index of Products and Services:
CABLE GLANDS - Power cables System groups: 88
HELIDECK LIGHTING - Lighting equipment & armatures System groups: 427
CAMERA SYSTEMS - Control & automation systems System groups: 1
LIGHTING SYSTEMS - Lighting equipment & armatures System groups: 427,89,893
CONTROL STATIONS - Control & automation systems System groups: 196
NAVIGATION - Positioning & navigation equipment System groups: 17
ELECTRICAL ANTI-ICE/DE-ICE - Electrical and electro work System groups: 88
OBSTRUCTION LIGHTS - Lighting equipment & armatures System groups: 427
ELECTRICAL INSTALLATION EQUIPMENT - Electrical and electro work System groups: 85,87,88
SHIP HORNS - Other nautical equipment System groups: 427
ENCLOSURE SYSTEMS - Control & automation systems System groups: 41
WIND-SCREEN WIPERS - Bridge inventory & equipment System groups: 1
HEATING SYSTEMS - Control & automation systems System groups: 41
373_470_LF_2016.indd 461 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
462
The Supplier is represented in the following countries:
ARGENTINA AUSTRALIA BRAZIL CANADA CHILE CHINA CROATIA DENMARK FINLAND FRANCE GERMANY ICELAND INDIA ITALY JAPAN
KOREA, SOUTH MALAYSIA MEXICO NETHERLANDS, THE PERU POLAND PORTUGAL RUSSIA SINGAPORE SPAIN TURKEY UNITED ARAB EMIRATES UNITED KINGDOM UNITED STATES VIETNAM
TTS MARINE AS (NORWAY)
Barstølveien 26, 4606 Kristiansand, NORWAY Telephone: +47 38 04 95 00. Telefax: +47 38 04 93 41 e-mail: [email protected] Internet: www.ttsgroup.com Company brochures and datasheets are available on the Internet. TTS Marine AS, is headquartered in Kristiansand, Norway and also have an office in Bergen, Norway. It is a product and service company and forms part of the TTS Marine division. TTS Marine AS is the center of excellence for aftersales, service, conversion, inspection and training for marine cranes, offshore equipment, davits and other lifesaving equipment. It also design and supplies rescue boat davits, fender davits, winch bollards and service platforms See index of Products and Services:
FENDER DAVITS - Davits and masts System groups: 501
SERVICE PLATFORMS - Hatches, covers, ports, ramps & platforms System groups: 30
RESCUE BOAT DAVITS - Davits and masts System groups: 501
Company reg.no: 932142104 Folke Bernadottes vei 38, Fyllingsdalen, P.O. Box 3577 Fyllingsdalen, 5845 Bergen, NORWAY Telephone: +47 55 11 30 50 . Telefax: +47 55 11 30 60 e-mail: [email protected] Internet: www.tts-se.com TTS Ships Equipment AS, located in Bergen, Norway, is designated the side loading equipment ’Centre of Excellence’ and forms part of the TTS Offshore & Heavy lift division. TTS Ships Equipment is a leading designer and supplier of cargo handling and cargo access equipment for a variety of vessel types, including dry cargo ships, reefer ships and offshore vessels. Working closely with customers, the company combines knowledge and experience with creativity and innovation to develop optimal solutions for the many logistical demands of handling and accessing unitised cargo. Equipment for Offshore vessels TTS Ships Equipment AS can supply a wide variety of different external doors, moon pool hatch covers, hangar doors, observation platforms, provision platforms and other types of doors. Equipment for cruise ships and passenger ferries TTS Ships Equipment offers a wide range of personnel access and cargo handling equipment including complete side loading systems and solutions for handling and accessing unitised cargo and personnel for cruise ships and passenger ferries. The company can tailor products to suit the individual requirements of shipowners and operators. See index of Products and Services:
MOON POOL HATCH COVERS - Hatches, covers, ports, ramps & platforms System groups: 30
EXTERNAL SIDE DOORS - Watertight/weathertight doors & windows System groups: 514
SIDELOADING SYSTEMS - Cargo handling equipment - Cranes, crane equipment, lifting devices & booms System groups: 307
HANGAR DOORS - Watertight/weathertight doors & windows
373_470_LF_2016.indd 463 07.08.2016 11:47:12
DIRECTORY OF SUPPLIERS
464
TTS SYNCROLIFT AS
Company reg.no: 939077774 Holterkollveien 6, P.O. Box 49, 1441 Drøbak, NORWAY Telephone: +47 64 90 79 10. Telefax: +47 64 93 16 63 e-mail: [email protected] Internet: www.tts-marine.com Company brochures and datasheets are available on the Internet. TTS Syncrolift AS has during the last thirty years been a major supplier to ship yards worldwide with state of the art products. In these years we have demonstrated our performance and innovatory characteristic solving our client challenges. As a leading supplier of shipyard production technology, heavy load handling and shipyard consultancy, TTS gives you the profitable opportunity to work with one professional partner in the whole modernisation process. TTS has continuously developed systems for handling, launching and docking purposes. Today we offer a wide range of products for efficient Block and Ship Transfer Systems, as well as shiplift and slipway systems. Our transfer systems include rail trolleys, tyre wheel system and track/tyre-less systems. All TTS applications are designed as fluid bed systems. This means that the impact forces will be distributed out, i.e. there will be no high peak loads during the handling of blocks or ships and the user knows exactly which forces that are exerted on the ship/block and ground at any time. The TTS Ship Transfer Systems have been delivered both to navy and commercial shipyards, for construction as well as repair. See index of Products and Services:
BLOCK POSITIONING UNITS (BPU`) - Blocks & shackles System groups: 274,344
PROFILE AND BEAM CUTTING LINES - Plates and profiles System groups: 196
DOCKING SUPPORT ARMS - Repairs, modifications & docking System groups: 144
RAIL TRANSFER SYSTEM - Ladders, railings, stairs, ramps & gangways System groups: 52
DOCKLIFT - Repairs, modifications & docking System groups: 144,17
ULMATEC PYRO ASCompany reg.no: 966300345 Gamlem, 6280 Søvik, NORWAY Telephone: +47 70 20 98 70. Telefax: +47 70 20 98 90 See index of Products and Services:
CENTRAL HEATING SYSTEM - Centrals, consoles & panels System groups: 84
INCINERATORS - Boilers, burners and incinerators System groups: 445
EXHAUST GAS ECONOMIZER - Exhaust components & silencers System groups: 109,601,641,743
TANK HEATING SYSTEMS - Tank cleaning equipment System groups: 382,444
VESTDAVIT ASDamsgårdsveien 143, 5160 Laksevåg, NORWAY Telephone: +47 55 54 92 00. Telefax: +47 55 34 24 04 See index of Products and Services:
DAVITS - Davits and masts System groups: 501,502
VESTNES OCEAN AS
Company reg.no: 979523483 Leirvåggt. 1, P.O. Box 409, 6901 Florø, NORWAY Telephone: +47 57 75 20 70. Telefax: +47 57 75 20 71 e-mail: [email protected] Internet: www.vestnesnorway.com Company brochures and datasheets are available on the Internet. «Vestnes Ocean is a Scandinavian supplier of forward thinking interior solutions. We deliver “turn key” supplies of ship interior and outfitting. Vestnes Ocean provides complete services such as design, engineering, insulation, wall systems, flooring solutions, ceilings, galley equipment, curtains and of course our own furniture line “Willy” and “Keys” which we have developed together with professional designers and seamen. We make sure you get the quality and design you will want to have in a living quarter. Some of our references is major shipowners of Chemical tankers, juice carriers, PSV`s, Pipe laying vessels, navy and fishing vessels.”
373_470_LF_2016.indd 465 07.08.2016 11:47:13
DIRECTORY OF SUPPLIERS
466
See index of Products and Services:
CABINETS - Furniture & cabinets System groups: 5,51,541,548
FURNITURES - Furniture & cabinets System groups: 541
Lohnelia 70, 4640 Søgne, NORWAY Telephone: +47 38 01 90 70 e-mail: [email protected] Internet: www.wme.no Water Mist Engineering AS does engineering and manufacturing of Active Fire Fighting systems and Fire Prevention system. Through the years the company has become a single source, full-service and product supplier of Fire Protection systems. Our commitments to excellence are based upon an extensive experience within Fire engineering, System building, Process product and Systems Development within air-gas separation, services and commissioning. WME focuses on delivering innovative engineering services as well as cost efficient and high quality Fire Protection systems. WME is experienced in delivering Projects according to leading international standards like NORSOK, DNV, NFPA, BV etc. WME holds numerous references within Maritime & Offshore installations as well as chemical industry systems worldwide. See index of Products and Services:
FIRE FIGHTING SYSTEMS - Firefighting equipment System groups: 376,505,57,81,813
NITROGEN GENERATOR SYSTEMS - Generators, alternators & dynamos System groups: 196,376,6
373_470_LF_2016.indd 466 07.08.2016 11:47:13
467
DIRECTORY OF SUPPLIERS
WESTAD INDUSTRI AS
Company reg.no: 936612741 Heggenveien, 3360 Geithus, NORWAY Telephone: +47-32 78 95 00. Telefax: +47-32 78 95 10 e-mail: [email protected] Internet: www.westad.com Company brochures and datasheets are available on the Internet. The company was established in 1895 by Daniel Westad and manufactured initially valves to local pulp and paper industry. Various transitions in the industry allowed Westad to start serving the Marine industry around 1950. With the arrival of oil and gas production in Norway in the late 1970-ties, Westad adapted its product lines to serve this demanding market segment. Material requirements increased, and Westad delivered on its reputation. Special stainless steel materials like Titanium, Duplex, Super-duplex and 6MO became the common materials for valves in demanding services. Westad aims to be the leading supplier of high tech butterfly valves and ball valves for LNG, LPG, chemicals and other critical applications. Westad is a well reputed supplier of valves to the Marine Industry, Oil & Gas downstream and Oil & Gas upstream. Westad has for decades delivered butterfly valve packages to the offshore industry, the last major project being to Goliat. We are also providing valves to the FPSO business. Westad Industri AS is located at Geithus approximately 70 km outside Oslo. See index of Products and Services:
BUTTERFLY VALVES - Air & gas valves - Fluid valves & other armatures System groups: 57
VALVES - Air & gas valves - Fluid valves & other armatures System groups: 3,6,7
373_470_LF_2016.indd 467 07.08.2016 11:47:13
DIRECTORY OF SUPPLIERS
468
YARA MARINE AS
Drammensveien 134, 0277 Oslo, NORWAY Telephone: +47 47 88 85 44 e-mail: [email protected] Internet: www.greentechmarine.com Company brochures and datasheets are available on the Internet. Yara Marine Technologies develops innovative and high-performance solutions within environmental and energy-saving technology for the maritime and offshore industries. Their offices are located in Norway and Sweden. Yara Marine Technologies was founded in 2010 but its founders have many years of experience in the maritime industry as well as first-hand experience at sea. Yara Marine Technologies’ mission is to create exhaust gas cleaning and energy saving solutions that not only benefit the planet, but create significant financial rewards for clients. The first pilot installation of a Green Tech Marine® scrubber was conducted in the winter 2011-2012, after which DNV issued a statement of compliance. The company is supported by Innovation Norge, a fund supporting promising companies with strong business concepts. This gives the company a solid financial base. See index of Products and Services:
SCRUBBERS - Purification plants & fluid treatment System groups: 70
The Supplier is represented in the following countries: SWEDEN
373_470_LF_2016.indd 468 07.08.2016 11:47:13
469
DIRECTORY OF SUPPLIERS
ZENITEL NORGE ASCompany reg.no: 863503922 Bromsveien 17, 3194 Horten, NORWAY Telephone: +47 40 00 27 00 See index of Products and Services:
BATTERYLESS TELEPHONE SYSTEMS - Radio & telephone communication System groups: 425
SOUND SIGNAL RECEPTION SYSTEMS - Detection & identification equipment System groups: 426,427
CENTRAL CLOCK SYSTEMS - Other nautical equipment System groups: 417
TALK-BACK SYSTEMS - Other communication equipment System groups: 425
INTEGRATED COMMUNICATION SYSTEMS - Other communication equipment System groups: 42
TELEPHONE SYSTEMS - Radio & telephone communication System groups: 425
PUBLIC ADDRESS SYSTEMS - Other communication equipment System groups: 425
TV ANTENNA SYSTEMS - Antennas & transmitters System groups: 546
Eylex Pty Ltd. 9/10 Anella Avenue AU-NSW 2154 Castle Hill AUSTRALIA Telephone: +61 2 8850 0599 Telefax: +61 2 9894 1662 Contact person: Mr. Todd Williams Preferred Makers represented: Comrod Communication A/S Fode Nigeria Limited 24 Erastus Akingbola Street, Lekki Phase 1 Lagos NIGERIA Telephone: +234 1 271 8608/8609 Telefax: +234 1 271 8610 Email: [email protected] Contact person: Paul Blake www.fode-ltd.com Preferred Makers represented: Norsafe AS For Win Equipment & Engineering Co Ltd, Beijing Office Room 205, House Hao Bai C2 Block Building, No. 50, Xisanhuanbeilu CN-100044 Beijing CHINA Telephone: +86 10 88515498 88517369 88512699 88515022 Telefax: +86 10 88517458 Email: [email protected] Contact person: Cathy Yang www.forwin.com.cn Preferred Makers represented: Finnøy Gear & Propeller AS
Forbes Refrigeration Ltd. Station Road GB-AB41 9AY Ellon, Aberdeenshire, Scotland UNITED KINGDOM Telephone: +44-1358-72 08 53 Telefax: +44-1358-72 18 98 Contact person: Gordon Forbes Preferred Makers represented: Teknotherm Marine A/S Fournais AS Enrumvej 7 DK-2942 Skodsborg DENMARK Telephone: +45-42 89 04 45 Telefax: +45-42 89 42 25 Email: [email protected] Contact person: Peter Fournais www.fournais-ing.dk Preferred Makers represented: Brunvoll A.S FPS-Corpus Christi 4221 Beacon Street US-TX 78405 Corpus Christi UNITED STATES Telephone: (361) 289-9102 Telefax: (361) 289-1421 Preferred Makers represented: Hansen Protection AS FPS-Houston 8050 Harrisburg Blvd. US-TX 77012 Houston UNITED STATES Telephone: (713)-924-9600 Telefax: (713) 923-6272 Email: [email protected] www.fps-usa.com Preferred Makers represented: Hansen Protection AS
471_512_SR_Alf_2016.indd 481 07.08.2016 11:47:26
SALES REPRESENTATIVES - Alphabetical List
482
FPS-New Orleans 821 Industry Road US-LA 70062 Kenner UNITED STATES Telephone: (504) 466-8003 Telefax: (504) 469-9922 Email: [email protected] Preferred Makers represented: Hansen Protection AS Fraser Pty Ltd - Perth, H.I. 27 a Stockdale Rd AU-6163 WA O’Connor AUSTRALIA Telephone: +61 8 9314 7877 Telefax: +61 8 9314 5933 Contact person: Mr. J. McDonald, Mob: +61 411 072 772 Preferred Makers represented: Teamtec A/S Fraser Pty Ltd - Sydney, H.I. 6/5 Vuko Place, Warriewood 2102 NSW PO Box 885 AU-1660 Mona Vale NSW AUSTRALIA Telephone: +61 2 9970 7322 Telefax: +61 2 9913 7207 Contact person: Mr. M. Blyth, Mob: +61 400 311 756 Preferred Makers represented: Teamtec A/S Galram Surveyors & Adjusters Ltd. P.O. Box 4094 IL-77140 ISRAEL Telephone: +972 8 856 1634 Telefax: + 972 8 853 1325 Email: [email protected] www.galram.com Preferred Makers represented: Optimarin AS
Gandara & CIA. S.A., J.L. Acebal Idigoras 2-4 ES-48002 BilbaoSPAIN Telephone: +34-4232339 Telefax: +34-4249007 Preferred Makers represented: Masto Wire Service A/S Tranberg A.S. Gellweiler Travessa De Alecrim 3-2 PT-1200 Lisboa PORTUGAL Telephone: +351 21 340 7160 Telefax: +351 21 340 7169 Contact person: Rui Texeira Preferred Makers represented: Norsafe AS GET Ltd. Business Center “GRANI”, Furazhny Pereulok, Bld 3 liter “K”, Office 413 RU-191 015 St. Petersburg RUSSIA Telephone: +7 812 449 46 26 Telefax: +7 812 449 46 43 Email: [email protected] Contact person: Kirill Golubev Preferred Makers represented: Norsafe AS Gildor United ApS Moscow RUSSIA Telephone: +7 495 913 67 10 Telefax: +7 495 913 67 14 Email: [email protected] Contact person: Olga N. Murdygina Preferred Makers represented: Norsafe AS
471_512_SR_Alf_2016.indd 482 07.08.2016 11:47:26
483
SALES REPRESENTATIVES - Alphabetical List
Gimex Pte. Ltd. 151 Chin Swee Road # 02-22, Manhattan House SG-169876 Singpore SINGAPORE Telephone: +65 67350278 Telefax: +65 67350279 Email: [email protected] Contact person: Mr. Henry Oh www.gimex.com Preferred Makers represented: EuroRope Marine AS Gin-A Co., Ltd. 912 Dongbu Root Bldg. 16-2, Sunae-dong, Bundang-gu, Seongnam-si KR-463-825 Gyeonggi-do KOREA, SOUTH Telephone: +82 31 711 9681/2 Telefax: +82 31 711 4230 Email: [email protected] Contact person: B.H. Lee /S.H. Jung Preferred Makers represented: Maritime Partner AS Global Mar-Tech Company Ltd. 21-25 Cheung Sha Wan Road HONG KONG Telephone: + 852 3520 4957. Mob. phone: +852 9454 3254 Telefax: +852 3520 4951 Email: [email protected] Contact person: CK Tang Preferred Makers represented: AF Offshore AeronMollier AS
GlobalSim Inc. 12577 South 265 West, Suite 3A, US-84020 Draper, Utah UNITED STATES Telephone: +1 800 979 9728 Telefax: +1 801 571 9535 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS GM Turbo D.o.o. Vukovarska 58 HR-21000 Split, Hrvatska CROATIA Telephone: +021 543 985 Email: [email protected] Contact person: Danica Griusic Preferred Makers represented: Norsafe AS Goltens Korea Room 1003, ACE Hightech 21, 1470, U-Dong, Haeundae-Gu KR-612-020 Busan KOREA, SOUTH Telephone: +82 51 744 8000 Telefax: +82 51 744 8008 Email: [email protected] Contact person: Mr. K.O. Kim, Mob: +82 10 93927441 www.goltens.com Preferred Makers represented: Teamtec A/S Goltens Singapore Pte. Ltd. 6A, Benoi Road SG-629881 Singapore SINGAPORE Telephone: +65 6861 5220 Telefax: +65 6861 1037 Email: [email protected] Contact person: Mr. Tony Chan Preferred Makers represented: Teamtec A/S
471_512_SR_Alf_2016.indd 483 07.08.2016 11:47:26
SALES REPRESENTATIVES - Alphabetical List
484
GTA Marine 33 Krauser Road, Downingtown US-PA 19335 Thorndale UNITED STATES Telephone: +1 610 321 0300 Telefax: +1 610 321 0609 Email: [email protected] Contact person: Mr. Gerard Bourgeault / Mob: +1 610 999 1840 www.gtamarine.com Preferred Makers represented: Teamtec A/S Hai Cheung Trading Co. (HK) Ltd. 8/F Juyang Tower, No. 1200, Pudong Avenue CN-PC 200135 Shanghai CHINA Telephone: +86 21 6888 9889 Ext. 6862 Telefax: +86 21 6329 3888 Email: [email protected] Contact person: Mr. Danny Ran - Shanghai Office www.haicheung.com Preferred Makers represented: Teamtec A/S Hai Cheung Trading Co., (HK) Ltd. RM 1706-7 Emperor Group Centre, 288 Hennessy Road Wanchai, Hong Kong CHINA Telephone: +852 2836 3936 Telefax: +852 2893 5550 Email: [email protected] Contact person: Mr. Francis Chan www.haicheung.com Preferred Makers represented: Teamtec A/S
Hansen Protection Canada Ltd. 131 Thornhill Drive CA-B3B 1S2 Dartmounth, N.S CANADA Telephone: +1-902-468 6382 Telefax: +1-902-468 2367 Preferred Makers represented: Hansen Protection AS Headland Engineering Pty Ltd 666, Pittwater Road, Brookvale AU-NSW 2100 Sydney AUSTRALIA Telephone: +61-2-9939 1966 Telefax: +61-2-9938 6210 Contact person: G. Mannasz Preferred Makers represented: Finnøy Gear & Propeller AS Health Lead Development Ltd. - Head-Office Room B, 12th Floor, Guangdong Investment Tower, 148 Connaught Road Central Hong Kong CHINA Telephone: +852-2858 0012 Telefax: +852-2559 6731 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd. - Wuhan Rm 21-1-202 Jinchang Garden, 101 Zhuodaoquan Road, Hongshan District CN-430079 Wuhan CHINA Telephone: +86 27 8761 98 08 Telefax: +86 27 8761 98 08 Email: [email protected] Preferred Makers represented: Harding Safety AS
471_512_SR_Alf_2016.indd 484 07.08.2016 11:47:26
485
SALES REPRESENTATIVES - Alphabetical List
Health Lead Development Ltd., Dalian Office 23A Li Yuan Mansion, No. 16-18 Ming Ze Street Zhongshan District Dalian CHINA Telephone: +86 411 82825205 Telefax: +86 411 82803992 Email: [email protected] Contact person: Michael Tse/P.X. Song www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Guangzhou office 30F Tai Fu Center, Tai Hong Plaza, No. 111 Tai Kang Road CN-510115 Guangzhou CHINA Telephone: +86 20 83221115 Telefax: +86 20 831221110 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Shanghai Office Rm 801 King tower, No 28 Xinjingqiao, Pudong CN-201206 Shanghai CHINA Telephone: +86 21 3382 14 60 Telefax: +86 21 3382 14 65 Email: [email protected] Contact person: Mr. Lu Yi www.health-lead.com Preferred Makers represented: Harding Safety AS
Health Lead Development Ltd., Tianjin Office Room 501, Flat 23# Tai Feng Jia Yuan, No 99 Fourth avenue TEDA CN-300457 Tianjin CHINA Telephone: +86 22 66221118 Telefax: +86 22 66221118 Email: [email protected] Contact person: C.L. Zhang www.health-lead.com Preferred Makers represented: Harding Safety AS Heidemann Ing. & Handelsfirma ApS Sødergade 242 DK-9900 Fredrikshavn DENMARK Telephone: +45 98 422 030 Telefax: +45 98 438 890 Email: peer.heidemann.dk Contact person: Peer H. Heidemann Preferred Makers represented: Optimarin AS Henriksen Y. Cia. S.A., Gunnar Melian 3838 AR-1430 Buenos Aires ARGENTINA Telephone: +54 1 541 0969 Telefax: +54 1 541 4411 Contact person: Clas Henriksson Preferred Makers represented: Norsafe AS
471_512_SR_Alf_2016.indd 485 07.08.2016 11:47:26
SALES REPRESENTATIVES - Alphabetical List
486
Hermes, Ing. Lorenzo Ermini Via Trento 43/2 IT-16145 Genova ITALY Telephone: +39 010 3622 525 Telefax: +39 010 3169 58 Email: [email protected] Contact person: Lorenzo Ermini Preferred Makers represented: Norsafe AS Hermont Marine Inc. 8080 Rte. Transcanadienne, CA-QC, H4S 1 M5 CANADA Telephone: +1 514-856-1212 Email: [email protected] www.hermont.com Preferred Makers represented: Teamtec A/S Heros R. Zone Industrielle, Baic de Numbo-Lots 6 et 7 BP3267 NC-98846 Noumea NEW CALEDONIA Telephone: +687 28 59 69 Telefax: +687 25 22 47 Preferred Makers represented: Norsafe AS Hodt Korrosschutz GmbH Flurstr. 8 DE-21465 Wentorf Hamburg GERMANY Telephone: +49 40 72 90 40 30 Telefax: +49 40 72 90 40 59 Preferred Makers represented: Masto Wire Service A/S
Holland Safety Energieweg 2c NL-1785 AD Den Helder NETHERLANDS, THE Telephone: 223 614 999 Email: [email protected] www.holland-safety.nl Preferred Makers represented: Hansen Protection AS Hua Hai Equipment & Engineering Co. Ltd Room 2018, Block B, Sea View Estate, 4-6 Watson Road North Point, Hong Kong CHINA Telephone: +852-8251 7783 Telefax: +852-2851 7522 Email: [email protected] Contact person: Kenneth Jo www.huahai.com.hk Preferred Makers represented: Maritime Partner AS Hydroid Europe Unit 3, Basepoint Enterprise Centre Anderson’s Road GB-SO14 5FE Southampton UNITED KINGDOM Telephone: +44-2380-682-388 Telefax: +44-2380-682-389 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Hydroid Inc. 6 Benjamin Nye Circle US-MA 02559-4900 Pocasset UNITED STATES Telephone: +1 508 563 6565 Telefax: +1 508 563 3445 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
471_512_SR_Alf_2016.indd 486 07.08.2016 11:47:26
487
SALES REPRESENTATIVES - Alphabetical List Ilaa Maldives Pte. Ltd. Onugas Magu MV-10637 (M2-24), Hulhumale’ MALDIVES Telephone: +960 335 5751 Telefax: +960 31 07 02 Email: [email protected] Contact person: Mr. Adnan Moosa www.ilaamaldives.com Preferred Makers represented: Teamtec A/S Ilkfer Group Guzelyali Mah.Sahil Bulvari, Cad.Deniz Sokak No. 54/2, Guzelyali/Pendik Istanbul TURKEY Telephone: +90 216 493 09 62 Telefax: +90 216 493 09 69 Email: [email protected] www.uniservice.com.tr Preferred Makers represented: Optimarin AS IMC Comercio Int. c Repr. Ltda Rua Visconde do Piraja 414/311, 40, Ipanema BR-22410-002 Rio de Janeiro BRAZIL Telephone: +55 21 2522 0696 Telefax: +55 21 2522 6945 Email: [email protected] Contact person: Kenneth Mill Preferred Makers represented: Norsafe AS
Imex Marine D.o.o. Dragonja 1 HR-52100 Pula CROATIA Telephone: +385 52 502 366 Telefax: +385 52 502 330 Email: [email protected] Contact person: Mr. Mladen Radolovic Preferred Makers represented: Brunvoll A.S Implementos y Servicios Electrónicos SA de CV (ISEL) Via Lopez Mateos 128, Col Jacarandas MX-54050 Tlalnepantla, Estado de México cp MEXICO Telephone: +52 55 5398 8088 Telefax: +52 55 5397 3985 Email: [email protected] Preferred Makers represented: Tranberg A.S. IMS Griffin ul. Luzycka 2A PL-81-537 Gdynia POLAND Telephone: (058) 620 52 63 Email: [email protected] www.griffin-marine.pl Preferred Makers represented: Hansen Protection AS Imtech Marine Germany GmbH Albert Einstein - Ring 6 DE-22 761 Hamburg GERMANY Telephone: +49-40-8997215 Telefax: +49-40-89972199 Contact person: Michael Miersen Preferred Makers represented: Comrod Communication A/S
471_512_SR_Alf_2016.indd 487 07.08.2016 11:47:26
SALES REPRESENTATIVES - Alphabetical List
488
International Safety Products Ltd Orrell Mount, 159 Hawthorne Road GB-L20 6JU Bootle UNITED KINGDOM Telephone: +44 (0)151 922 2202 Email: [email protected] www.ispl.co.uk Preferred Makers represented: Hansen Protection AS Interprombribor 6th floor No. 10, Zvyozdnyi bulvar 21 RU-129085 Moskau RUSSIA Telephone: +7 495 6163252 Telefax: +7 495 6163464 Email: [email protected] Preferred Makers represented: Tranberg A.S. Intra Mare Greece 4, Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 210 429 3843 Telefax: +30 210 429 3845 Email: [email protected] Contact person: George Gerassimou www.intramare.gr Preferred Makers represented: Norsafe AS Teknotherm Marine A/S Intra Mare Hellas 4 Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 10 4293 843 Telefax: +30 10 4293 845 Email: [email protected] Contact person: Mr. George Gerassimou Preferred Makers represented: Libra-Plast AS
Issaquah Trading 4622 174th Pl. Se. US-98006 Bellevue UNITED STATES Telephone: +1 425-830-4154 Email: [email protected] Preferred Makers represented: Teamtec A/S Issaquah Trading 4622 174th PL SE US-WA 98006 Bellevue UNITED STATES Telephone: +1 425 830 4154 Email: [email protected] Contact person: Mr. Per N. Thomassen Preferred Makers represented: Teamtec A/S Jaeun Corporation 648-8, Moonhyun-2dong KR-608-042 Pusan KOREA, SOUTH Telephone: +82 51 631 7398 Telefax: +82 51 647 7515 Contact person: Chae Kyu Lee Preferred Makers represented: Comrod Communication A/S Jason Electronics (Pte) Ltd. Blk 194 Pandan Loop #06-05, Pantech Industrial Complex SG-128383 Singapore SINGAPORE Telephone: +65 8720211 Telefax: +65 8721800 Contact person: Ronald Tan Preferred Makers represented: Comrod Communication A/S
471_512_SR_Alf_2016.indd 488 07.08.2016 11:47:26
489
SALES REPRESENTATIVES - Alphabetical List
Jason Offshore Equipment Co.,ltd 33I, New Time Plaza, Nanshan, Shenzhen Guangdong CHINA www.jasonoffshore.com Preferred Makers represented: Hansen Protection AS Kaminco Overseas Inc. Pireaus Branch: 57 Aki Miaouli P.O. Box 80 222 GR-18510 Piraeus GREECE Telephone: +301 45 28 240 Telefax: +301 42 94 887 Email: [email protected] Contact person: Sotirios Kaminis Preferred Makers represented: Finnøy Gear & Propeller AS Kas Pazariama A.S. Sedat Simavi Sokak TR-52/2 Cankaya Ankara TURKEY Telephone: +90 312 441 8385 Telefax: +90 312 441 4336 Email: [email protected] Preferred Makers represented: Tranberg A.S. KDU Worldwide Technical Services Fzc P6-171, Saif Zone P.O. Box #9567 Sharjah UNITED ARAB EMIRATES Telephone: +971-6-5575480 Telefax: +971-6-5575490 Email: [email protected] Contact person: Ralph Cabral, Director Technical Preferred Makers represented: AF Offshore AeronMollier AS
Killing Agencies and Marketing Limited Plot no. 7, Chandivali Farm Road, Chandivali IN-400 072 Mumbai INDIA Telephone: +91 22 2857 3581 Telefax: +91 22 2857 3549 Email: [email protected] Contact person: Pradeep M Mankame www.kaml.in Preferred Makers represented: Maritime Partner AS Kongsberg GeoAcoustics Ltd Shuttleworth Close, Gapton Hall Industrial Estate GB-NR31 0NQ Great Yarmouth UNITED KINGDOM Telephone: +44 1493 600 666 Telefax: +44 1493 651 100 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg GeoAcoustics Pte Ltd. 30 Loyang Way, #07-12 SG-508769 Singapore SINGAPORE Telephone: +65 6546 3687 Telefax: +65 6546 3690 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime - Training center Avenida Hildebrando Alves Barbosa 3.700 - Nossa, Senhora da Ajuda BR-RJ 27950-010 Macaé BRAZIL Telephone: +55 22 3311 8121 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
471_512_SR_Alf_2016.indd 489 07.08.2016 11:47:26
SALES REPRESENTATIVES - Alphabetical List
490
Kongsberg Maritime China (Jiangsu) Ltd. 3F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983333 Telefax: +86-511-81983399 Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China (Shanghai) Ltd. - Site Office Rm 2002, North Tower, 3 Huaqiang Road CN-510623 Guangzhou CHINA Telephone: +86-188-19825000 Telefax: +86-20-38039496 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China (Shanghai) Ltd. - Site Office RM 2703A/B, 25 Tongxing Street CN-116001 Dalian CHINA Telephone: +86-188-41181669 Telefax: +86-411-39869768 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China Ltd. No.6 Building, 401 Chuanqiao Road CN-201206 Shanghai CHINA Telephone: +86-21-31279888 Telefax: +86-21-31279555 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Kongsberg Maritime China Zhenjiang Ltd. 1-2F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983222 Telefax: +86-511-81983299 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime do Brasil S.A. Av. Rio Branco 173 - 16 andar , Centro BR-BR-20040-007 Rio de Janeiro BRAZIL Telephone: +55 21 2240 9402 Telefax: +55 21 2262 8749 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Hellas SA 7 Gravias street GR-7 Gravias street Piraeus GREECE Telephone: +30 210 4117200 Telefax: +30 210 4117200 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Holland BV Edisonweg 10 NL-3208 kb Spijkenisse NETHERLANDS, THE Telephone: +31 181 623 611 Telefax: +31 181 626 162 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
471_512_SR_Alf_2016.indd 490 07.08.2016 11:47:26
491
SALES REPRESENTATIVES - Alphabetical List
Kongsberg Maritime Inc. 5373 W. Sam Houston Parkway N, Suite 200 US-TX 77041 Houston UNITED STATES Telephone: +1 713 329 5580 Telefax: +1 713 329 5581 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Inc. 150 James Drive East, Suite 160 US-LA 70087 Saint rose UNITED STATES Telephone: +1 504 712 2799 Telefax: +1 504 712 7986 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime India Private Ltd. Plot No 14,Sector 24,Vashi-Turbhe,, Sion-Panvel Highway IN-400 705 Navi Mumbai INDIA Telephone: +91 22 4119 0101 Telefax: +91 22 4119 0111 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. #1101-Harbor Tower, 113-1, Nampodong 6-Ga, Jung-Gu KR-600-046 Busan KOREA, SOUTH Telephone: +82-51-242-9933 Telefax: +82-51-242-9934 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Kongsberg Maritime Korea Ltd. - Site Office 3F,181-23,Seobu-dong, Dong-gu KR-681-807 Ulsan KOREA, SOUTH Telephone: +82 52 236 0869 Telefax: +82 52 236 0881 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 3F,1869, Yongdang-ri, Samho-eup, Youngam-gun KR-526-896 Jellanam-do KOREA, SOUTH Telephone: +82 61 461 0160 Telefax: +82 61 461 0160 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 4F, Mariposa Bldg 531-17, Okpo-dong KR-656-906 Geoje, Gyeongsangnam-do KOREA, SOUTH Telephone: +82 55 687 4561 Telefax: +82 55 687 4661 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Korea Ltd. - Site Office 2F, Artvil Bldg 1198, Jangpyung-ri, Shinhyun-eup KR-656-808 Geoje, Gyeongsangnam-do KOREA, SOUTH Telephone: +82 55 633 7061 Telefax: +82 55 633 7051 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
471_512_SR_Alf_2016.indd 491 07.08.2016 11:47:26
SALES REPRESENTATIVES - Alphabetical List
492
Kongsberg Maritime Ltd Campus 1, Aberdeen Science & Tecnology Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 12 24 22 65 00 Telefax: +44 12 24 22 65 01 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd Campus 1, Aberdeen Innovation Park, Balgownie, Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. Airport Industrial Estate, Wick GB-KW1 4QS Caithness UNITED KINGDOM Telephone: +44 1 955 603 606 Telefax: +44 1 955 607 520 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. 11 The Briars Waterberry Drive, Waterlooville GB-PO7 7YH Portsmouth UNITED KINGDOM Telephone: +44 023 9224 7800 Telefax: +44 023 9224 7808 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Kongsberg Maritime Ltd. 261 Brownlow Avenue, Dartmouth CA-B3B 2B6 Nova Scotia CANADA Telephone: +1 902 468 2268 Telefax: +1 902 468 2217 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. - Offshore Campus 1 , Aberdeen Innovation Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Mexico S.A. DE C.V. Av. La Marigalante 311-31, Boca Del Rio MX-94298 Veracruz MEXICO Telephone: + 52 229 921 7708 Telefax: +(52) 229 197 1198 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Middle East DMCCO Dubai Investment Park, Falcon House Dubai UNITED ARAB EMIRATES Telephone: +971-4-8991800 Telefax: +971-4-8991801 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Norrkust Marina Varvs AB Industriområdet SE-952 95 Båtskärnäs SWEDEN Telephone: 0923-67 02 72 Email: [email protected] www.norrkustmarina.se Preferred Makers represented: Hansen Protection AS North West Service Ltd. Tavricheskaya str. 19-13 RU-191015 St. Petersburg RUSSIA Telephone: +7 812 2757832 Telefax: +7 812 320 014 6 Email: [email protected] Contact person: Mr. Pavel Lastochkin, Director www.nws-spb.ru Preferred Makers represented: Teamtec A/S Ocean Fair International LLC Dubai Investments Park - Phase II, Near Abu Dhabi Pipe Factory (ADPF) Dubai UNITED ARAB EMIRATES Telephone: +971 4 8849555 Telefax: +971 4 8849557 Email: [email protected] www.oceanfair.com Preferred Makers represented: EuroRope Marine AS Ocean Power & Equipment Co. 1140 Bloomfield Avenue, Suite 107 US-NJ 07006 West Caldwell UNITED STATES Telephone: +1 973 575 5775 Telefax: +1 973 575 5850 Email: [email protected] Preferred Makers represented: Optimarin AS
471_512_SR_Alf_2016.indd 499 07.08.2016 11:47:27
SALES REPRESENTATIVES - Alphabetical List
500
Oceanist Deniz Araclari Muh. Mum. San ve Tic. LTD STI. Kavacik Mah. F.S.M. Cad., Yayabeyi Sk. No:2/13 TR-34810 Beykoz / Istanbul TURKEY Telephone: +90 216 701 19 03 Telefax: +90 216 701 19 23 Email: [email protected] Contact person: Mr. Umur CULHA www.oceanist.com Preferred Makers represented: Libra-Plast AS Oceanist Engineering Ltd. Kavacik Mah. F.S.M. Cad. Yayabeyi Sk. No.: 2/13 TR-34810 Beykoz - Istanbul TURKEY Telephone: +90 216 701 1903 Telefax: +90 216 701 1923 Email: [email protected] Contact person: Umur Culha Preferred Makers represented: Brunvoll A.S Parat Halvorsen A-S Omega SSP Calle 61 Entre Av. 3E Y 3F, No. 3E-49, Sector Las Mercedes, Maracaibo 4002 Zulia VENEZUELA Telephone: +58 261 792 2616 Telefax: +58 261 792 5268 Email: [email protected] Contact person: Mr. John Ketchum Preferred Makers represented: Norsafe AS
Onursan Co. Ltd. Icmeler, Rauf Orbay Cad., Gul Sok. No. 8 Turzla - Istanbul TURKEY Telephone: +90 216 395 82 27 Telefax: +90 216 395 04 60 Email: [email protected] Contact person: Mr. Barbaros Onur www.onursan.net Preferred Makers represented: Norsafe AS Parat Korea Centum Class one, Rm. 1413, Haeunde KR-612-050 Busan KOREA, SOUTH Telephone: +82 10 3189 2916 Telefax: +82 51 783 2916 Email: [email protected] Contact person: S. H. Oh Preferred Makers represented: Parat Halvorsen A-S Pasch Capitán Haya 9 ES-28020 Madrid SPAIN Telephone: +34 91 598 37 77 Telefax: +34 91 555 13 41 Email: [email protected] Contact person: Juan Antonio Azpiazu www.pasch.es Preferred Makers represented: Maritime Partner AS Pasch Y Cia Capitan Haya 9 ES-28020 Madrid SPAIN Telephone: +34 91 598 37 60 Telefax: +34 91 555 13 41 Contact person: Juan Antonio Azpiazu Preferred Makers represented: Parat Halvorsen A-S
471_512_SR_Alf_2016.indd 500 07.08.2016 11:47:27
501
SALES REPRESENTATIVES - Alphabetical List Petroleum Technology Co. W.L.L. 8th Floor, Toyota Tower P.O. Box 16069 Doha QATAR Telephone: +974 441 96 03 Telefax: +974 441 96 04 Email: [email protected] Contact person: Mr. Jassim Jacob www.petrotec.com.qa Preferred Makers represented: Norsafe AS Phong Viet Co. Ltd. 45 Road No. 32, Tanphong Ward, District 7 HoChiMinh City VIETNAM Telephone: +84 8 377 17 179 Telefax: +84 8 377 15 791 Email: thuan2phongvieco.com Contact person: Tran Dinh Thuan www.phongvietco.com Preferred Makers represented: Norsafe AS Pilot Marine 2751 Parsons Rest US-FL 32309 Talahassee UNITED STATES Telephone: (850) 893-5730 Telefax: (850) 668-0822 Email: [email protected] Contact person: Mr. Jon Denton Smith Preferred Makers represented: Comrod Communication A/S
PT. Assindo Perniagaan Internasional (API) Victoria Centre 3rd Floor, Jl. Sultan Hasanuddin No. 47-51 P.O. Box 4051 ID-12160 Jakarta INDONESIA Telephone: +62 21 72 55541 Telefax: +62 21 72 55546 Email: [email protected] Contact person: Mr. Bachtiar Sonda and Mr. Arnold Karauwan Preferred Makers represented: Teamtec A/S Quicklog Lda Casais do Chafariz 28 PT-2565-774 Turcifal PORTUGAL Email: [email protected] Preferred Makers represented: Optimarin AS Radio Holland Belgium NV Noordersingel 17 BE-2140 Deurne (Antwerp) BELGIUM Telephone: +32-3-3201711 Telefax: +32-3-3662470 Contact person: Mr. Leo van Bulck Preferred Makers represented: Comrod Communication A/S Radio Holland BV 8A Tuas Avenue 12 SG-2263 Singapore SINGAPORE Telephone: +65-8622218 Telefax: +65-8622430 Contact person: Mr. Danny Tan Preferred Makers represented: Comrod Communication A/S
471_512_SR_Alf_2016.indd 501 07.08.2016 11:47:27
SALES REPRESENTATIVES - Alphabetical List
502
Radio Holland Hong Kong 806 Join in Hang Sing Centre, 71-75 Container Port Road Kwai Chung N.T., Hong Kong CHINA Telephone: +8522-4239007 Telefax: +8522-34805898 Contact person: Stephen Chan Preferred Makers represented: Comrod Communication A/S Radio Holland Netherlands B.V. Eekhoutstraat 2 NL-3087 AB Rotterdam NETHERLANDS, THE Telephone: +31 10 4283344 Telefax: +31 10 4281498 Contact person: Mr. Jan Dielemann Preferred Makers represented: Comrod Communication A/S Radio Holland USA 8943 Gulf Freeway US-TX 77017 Houston UNITED STATES Telephone: +1-713-9433325 Telefax: +1-713-9433802 Email: [email protected] Contact person: Johnny Hamby Preferred Makers represented: Comrod Communication A/S Safety Marine Autralia Pty. Ltd. 37 Levanswell Road, Moorabbin AU-3189 Victoria AUSTRALIA Telephone: +613 9555 5211 Telefax: +613 9553 4380 Preferred Makers represented: Hansen Protection AS
Sang Myung Trading Co., Ltd. #1935, 21 Cebtury O/T, 55-1-Daeyeon-Dong Nam-Ku Pusan KOREA, SOUTH Telephone: +82 51 610 1211 Telefax: +82 51 610 1215 Email: [email protected] Contact person: H.T. Kim Preferred Makers represented: Libra-Plast AS SBS Ltd. Obvodniy canal, 138-96, office 447 RU-190020 St.Petersburg RUSSIA Telephone: ( 00) 7 (812) 495-94-20 Telefax: ( 00) 7 (812) 495-94-20 Email: [email protected] www.sbs-spb.ru Preferred Makers represented: Harding Safety AS Scan Pacific Marine, LLC 909 West Esplanade Avenue, Suite 104 US-LA 70065 Kenner UNITED STATES Telephone: +1 504 466 5788 Telefax: +1 504 466 5703 Email: [email protected] Contact person: Sandra Kleven www.scanpacificmarine.com Preferred Makers represented: Norsafe AS Scan, AS Fabriksvej 14 DK-6960 Hvide Sande DENMARK Telephone: +45 9731 1045 Telefax: +45 9731 1677 Email: [email protected] Contact person: Michael Vejlgaard Preferred Makers represented: Parat Halvorsen A-S
471_512_SR_Alf_2016.indd 502 07.08.2016 11:47:27
503
SALES REPRESENTATIVES - Alphabetical List Scanadria d.o.o. Trgovina i zastupanje, Stube Marka Remsa 18 HR-51000 Rijeka CROATIA Telephone: +385 51 345 007 Telefax: +385 51 345 008 Email: [email protected] Contact person: Mr. Milos Scepanovic Preferred Makers represented: Libra-Plast AS Scanadria D.O.O. Stube Marka Remsa 18 HR-51000 Rijeka CROATIA Telephone: +385 51 345007. Mob. phone: +385 98 546729 Telefax: +385 51 345008 Email: [email protected] Contact person: Milos Scepanovic Preferred Makers represented: AF Offshore AeronMollier AS Scanvik Marine Services Pte. Ltd. 31B Benoi Road, pioneer lot Singapore SINGAPORE Telephone: +65-67 95 78 87 Telefax: +65-67 95 89 08 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Anda-Olsen AS Brunvoll A.S Finnøy Gear & Propeller AS
SALES REPRESENTATIVES - Alphabetical List Western Advance Pty Ltd. Unit 10, 199 Balcatta Road, AU-6021 Balcatta Western AUSTRALIA Telephone: +61 8 9240 4622 Telefax: +61 8 9240 4822 Email: [email protected] Contact person: Michael Pugh www.westernadvance.com.au Preferred Makers represented: Norsafe AS Wide Beam SDN.BHD No. 17 Jalan SS 7/26, Kelana Jaya 47301 Petaling Jaya, Selangor D.E. MALAYSIA Telephone: +603 780 35371 Telefax: +603 780 35171 Email: [email protected] Preferred Makers represented: Tranberg A.S. Wildhagen Marine-Service GmbH Braunstrasse 12 DE-D-24145 Kiel GERMANY Telephone: +49 431 713809 Telefax: +49 431 714644 Email: [email protected] Preferred Makers represented: Harding Safety AS Wiltrading Pty. Ltd. 36 Dody Str. P.O. Box 133 AU-NSW 2015 Alexandria AUSTRALIA Contact person: T. Amundsen Preferred Makers represented: Masto Wire Service A/S
Wiltrading Pty. Ltd. 20 Mews Road P.O. Box 438 AU-WA 6160 Fremantle AUSTRALIA Telephone: +61 8 9335 9080 Telefax: +61 8 9335 7406 Contact person: Michael Connolly Preferred Makers represented: Maritime Partner AS Wire Rope Industries 104 Lorence St. unit 7 CA-PC3 RB Sudbury, Ontario CANADA Telephone: 204-7864404 Telefax: 204-7862848 Contact person: Rick Balmer Preferred Makers represented: Masto Wire Service A/S Woolley Pty. Limited, James 86 QUEEN STREET P.O. Box 161 AU-2282 Warners Bay, New South Wales AUSTRALIA Telephone: +61 249 48 90 20 Email: [email protected] Preferred Makers represented: Brunvoll A.S World Ocean Co., Ltd. 10th Fl., Hae Deok B/D, 1212-11 Choryang-Dong, Dong-Gu KR-601-839 Busan KOREA, SOUTH Telephone: 82 51 462 2554 Preferred Makers represented: Harding Safety AS
471_512_SR_Alf_2016.indd 511 07.08.2016 11:47:27
SALES REPRESENTATIVES - Alphabetical List
512
Yara Marine Technologies Gamla Almedalsvägen 21C SE-412 63 Gothenburg SWEDEN Telephone: +46 31 31 340 39 Email: [email protected] www.greentechmarine.com Preferred Makers represented: Yara Marine AS Zak Piping (M) Sdn Bhd D-3-3, Block D, Megan Phileo Promenade, 189 Jalan Tun Razak MY-50400 Kuala Lumpur MALAYSIA Telephone: +603 21 66 37 16 Telefax: +603 21 66 37 19 Email: [email protected] Contact person: Zakaria Mahmud Preferred Makers represented: Norsafe AS
471_512_SR_Alf_2016.indd 512 07.08.2016 11:47:27
513
SALES REPRESENTATIVES - Geographical List
SALES REPRESENTATIVESGEOGRAPHICAL LIST
513_558_SR-Geo_2016.indd 513 07.08.2016 11:47:49
SALES REPRESENTATIVES - Geographical List
514
ARGENTINACetus Naval Chile 1465 - 2 “B” AR-C1098AB Buenos Aires ARGENTINA Telephone: +54 11 4384 0842 Telefax: +54 11 4331 9426 Email: [email protected] www.cetus-naval.com.ar Preferred Makers represented: Optimarin AS Tranberg A.S. Cetus-Naval Ferreyra & Asociados S.H. Chile 1465 - 2 “B” AR-C1098AB Buoenos Aires ARGENTINA Telephone: +5411 4384 08 42 Telefax: +5411 4331 94 26 Email: [email protected] Contact person: Mr. A. Ferreyra / Mob: +54911 5630 42 47 Preferred Makers represented: Brunvoll A.S Teamtec A/S Henriksen Y. Cia. S.A., Gunnar Melian 3838 AR-1430 Buenos Aires ARGENTINA Telephone: +54 1 541 0969 Telefax: +54 1 541 4411 Contact person: Clas Henriksson Preferred Makers represented: Norsafe AS
Naval Motor S.A. Buenos Aires ARGENTINA Telephone: +54 11 4796 1777 Telefax: +54 11 4796 1888 Email: [email protected] Contact person: Jose Maria Valente Preferred Makers represented: Maritime Partner AS
AUSTRALIAAMI 107 Forsyth Street AU-W.A. 6163 O’Connor AUSTRALIA Telephone: +61-8-9337 3266 Telefax: +61-8-9314 2929 www.amisales.com.au Preferred Makers represented: Harding Safety AS Ceiling Works P.O. Box 70 Glengarry LPO AU-WA 6023 Glengarry LPO AUSTRALIA Telephone: +61 89 302 5777 Telefax: +61 89 302 5788 Email: [email protected] Preferred Makers represented: Libra-Plast AS Eylex Pty Ltd. 9/10 Anella Avenue AU-NSW 2154 Castle Hill AUSTRALIA Telephone: +61 2 8850 0599 Telefax: +61 2 9894 1662 Contact person: Mr. Todd Williams Preferred Makers represented: Comrod Communication A/S
513_558_SR-Geo_2016.indd 514 07.08.2016 11:47:49
515
SALES REPRESENTATIVES - Geographical List Fraser Pty Ltd - Perth, H.I. 27 a Stockdale Rd AU-6163 WA O’Connor AUSTRALIA Telephone: +61 8 9314 7877 Telefax: +61 8 9314 5933 Contact person: Mr. J. McDonald, Mob: +61 411 072 772 Preferred Makers represented: Teamtec A/S Fraser Pty Ltd - Sydney, H.I. 6/5 Vuko Place, Warriewood 2102 NSW PO Box 885 AU-1660 Mona Vale NSW AUSTRALIA Telephone: +61 2 9970 7322 Telefax: +61 2 9913 7207 Contact person: Mr. M. Blyth, Mob: +61 400 311 756 Preferred Makers represented: Teamtec A/S Headland Engineering Pty Ltd 666, Pittwater Road, Brookvale AU-NSW 2100 Sydney AUSTRALIA Telephone: +61-2-9939 1966 Telefax: +61-2-9938 6210 Contact person: G. Mannasz Preferred Makers represented: Finnøy Gear & Propeller AS NHP Electrical engineering Products Pty. Ltd. 43-67 river Street AU-3112 Richmond, Victoria AUSTRALIA Telephone: +61 3 94292999 Telefax: +61 3 94291075 Email: [email protected] Preferred Makers represented: Tranberg A.S.
Safety Marine Autralia Pty. Ltd. 37 Levanswell Road, Moorabbin AU-3189 Victoria AUSTRALIA Telephone: +613 9555 5211 Telefax: +613 9553 4380 Preferred Makers represented: Hansen Protection AS Western Advance Pty Ltd. Unit 10, 199 Balcatta Road, AU-6021 Balcatta Western AUSTRALIA Telephone: +61 8 9240 4622 Telefax: +61 8 9240 4822 Email: [email protected] Contact person: Michael Pugh www.westernadvance.com.au Preferred Makers represented: Norsafe AS Wiltrading Pty. Ltd. 36 Dody Str. P.O. Box 133 AU-NSW 2015 Alexandria AUSTRALIA Contact person: T. Amundsen Preferred Makers represented: Masto Wire Service A/S Wiltrading Pty. Ltd. 20 Mews Road P.O. Box 438 AU-WA 6160 Fremantle AUSTRALIA Telephone: +61 8 9335 9080 Telefax: +61 8 9335 7406 Contact person: Michael Connolly Preferred Makers represented: Maritime Partner AS
513_558_SR-Geo_2016.indd 515 07.08.2016 11:47:49
SALES REPRESENTATIVES - Geographical List
516
Woolley Pty. Limited, James 86 QUEEN STREET P.O. Box 161 AU-2282 Warners Bay, New South Wales AUSTRALIA Telephone: +61 249 48 90 20 Email: [email protected] Preferred Makers represented: Brunvoll A.S
BELGIUMRadio Holland Belgium NV Noordersingel 17 BE-2140 Deurne (Antwerp) BELGIUM Telephone: +32-3-3201711 Telefax: +32-3-3662470 Contact person: Mr. Leo van Bulck Preferred Makers represented: Comrod Communication A/S SKB Life Saving Equipment nv Vosseschijnstraat 44 BE-2030 Antwerp BELGIUM Telephone: +32 3 2138670 Email: [email protected] www.skblse.be Preferred Makers represented: Hansen Protection AS
BRAZILIMC Comercio Int. c Repr. Ltda Rua Visconde do Piraja 414/311, 40, Ipanema BR-22410-002 Rio de Janeiro BRAZIL Telephone: +55 21 2522 0696 Telefax: +55 21 2522 6945 Email: [email protected] Contact person: Kenneth Mill Preferred Makers represented: Norsafe AS Kongsberg Maritime - Training center Avenida Hildebrando Alves Barbosa 3.700 - Nossa, Senhora da Ajuda BR-RJ 27950-010 Macaé BRAZIL Telephone: +55 22 3311 8121 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime do Brasil S.A. Av. Rio Branco 173 - 16 andar , Centro BR-BR-20040-007 Rio de Janeiro BRAZIL Telephone: +55 21 2240 9402 Telefax: +55 21 2262 8749 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
513_558_SR-Geo_2016.indd 516 07.08.2016 11:47:49
517
SALES REPRESENTATIVES - Geographical List
Macnor Marine Consultoria Empresarial Ltda. Av. Evandro Lins e Silva, 840, Barra da Tijuca BR-Sl 815/816 Rio de Janeiro BRAZIL Telephone: +55 21 22 20 54 13 Telefax: +55 21 2262 3174 Email: [email protected] Contact person: Pedro Guimaraes www.macnor.com.br Preferred Makers represented: AF Offshore AeronMollier AS Brunvoll A.S Maritime Partner AS Teamtec A/S Tranberg A.S. Metalock Brazil Ltda. Rua Visconde do Rio Branco 20/26 Santos - SP BRAZIL Telephone: +55 13 3226 4686 Telefax: +55 13 7804 4977 Email: [email protected] Preferred Makers represented: Optimarin AS Noreq Do Brazil Innovation Norway, Rua Lauro Muller,116 / suite 2405, Torre do Rio Sul / Botafogo Rio de Janeiro BRAZIL Telephone: (21) 3544 0022 Telefax: (21) 82 59 46 86 Email: [email protected] Preferred Makers represented: Harding Safety AS
CHINA17 Group of Norway Ltd. Room 2316, 23/F, Pudong Civil Aviation Centre, 18 Xin Jin Qiao Road CN-201206 Shanghai CHINA Telephone: +86 21 5030 1750 Telefax: +86 21 5030 1731 Email: [email protected] Contact person: Martin Nickelsen Preferred Makers represented: Tranberg A.S. Aeron Energy Technology Co. Ltd. Building 7, 530 Huicheng Road, Huinan Town, Pudong New District CN-201300 Shanghai CHINA Telephone: +86 21 5228 2590 Telefax: +86 21 5228 6173 Email: [email protected] Preferred Makers represented: AF Offshore AeronMollier AS
For Win Equipment & Engineering Co Ltd, Beijing Office Room 205, House Hao Bai C2 Block Building, No. 50, Xisanhuanbeilu CN-100044 Beijing CHINA Telephone: +86 10 88515498 88517369 88512699 88515022 Telefax: +86 10 88517458 Email: [email protected] Contact person: Cathy Yang www.forwin.com.cn Preferred Makers represented: Finnøy Gear & Propeller AS Hai Cheung Trading Co. (HK) Ltd. 8/F Juyang Tower, No. 1200, Pudong Avenue CN-PC 200135 Shanghai CHINA Telephone: +86 21 6888 9889 Ext. 6862 Telefax: +86 21 6329 3888 Email: [email protected] Contact person: Mr. Danny Ran - Shanghai Office www.haicheung.com Preferred Makers represented: Teamtec A/S Hai Cheung Trading Co., (HK) Ltd. RM 1706-7 Emperor Group Centre, 288 Hennessy Road Wanchai, Hong Kong CHINA Telephone: +852 2836 3936 Telefax: +852 2893 5550 Email: [email protected] Contact person: Mr. Francis Chan www.haicheung.com Preferred Makers represented: Teamtec A/S
513_558_SR-Geo_2016.indd 519 07.08.2016 11:47:49
SALES REPRESENTATIVES - Geographical List
520
Health Lead Development Ltd. - Head-Office Room B, 12th Floor, Guangdong Investment Tower, 148 Connaught Road Central Hong Kong CHINA Telephone: +852-2858 0012 Telefax: +852-2559 6731 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd. - Wuhan Rm 21-1-202 Jinchang Garden, 101 Zhuodaoquan Road, Hongshan District CN-430079 Wuhan CHINA Telephone: +86 27 8761 98 08 Telefax: +86 27 8761 98 08 Email: [email protected] Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Dalian Office 23A Li Yuan Mansion, No. 16-18 Ming Ze Street Zhongshan District Dalian CHINA Telephone: +86 411 82825205 Telefax: +86 411 82803992 Email: [email protected] Contact person: Michael Tse/P.X. Song www.health-lead.com Preferred Makers represented: Harding Safety AS
Health Lead Development Ltd., Guangzhou office 30F Tai Fu Center, Tai Hong Plaza, No. 111 Tai Kang Road CN-510115 Guangzhou CHINA Telephone: +86 20 83221115 Telefax: +86 20 831221110 Email: [email protected] www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Shanghai Office Rm 801 King tower, No 28 Xinjingqiao, Pudong CN-201206 Shanghai CHINA Telephone: +86 21 3382 14 60 Telefax: +86 21 3382 14 65 Email: [email protected] Contact person: Mr. Lu Yi www.health-lead.com Preferred Makers represented: Harding Safety AS Health Lead Development Ltd., Tianjin Office Room 501, Flat 23# Tai Feng Jia Yuan, No 99 Fourth avenue TEDA CN-300457 Tianjin CHINA Telephone: +86 22 66221118 Telefax: +86 22 66221118 Email: [email protected] Contact person: C.L. Zhang www.health-lead.com Preferred Makers represented: Harding Safety AS
513_558_SR-Geo_2016.indd 520 07.08.2016 11:47:49
521
SALES REPRESENTATIVES - Geographical List
Hua Hai Equipment & Engineering Co. Ltd Room 2018, Block B, Sea View Estate, 4-6 Watson Road North Point, Hong Kong CHINA Telephone: +852-8251 7783 Telefax: +852-2851 7522 Email: [email protected] Contact person: Kenneth Jo www.huahai.com.hk Preferred Makers represented: Maritime Partner AS Jason Offshore Equipment Co.,ltd 33I, New Time Plaza, Nanshan, Shenzhen Guangdong CHINA www.jasonoffshore.com Preferred Makers represented: Hansen Protection AS Kongsberg Maritime China (Jiangsu) Ltd. 3F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983333 Telefax: +86-511-81983399 Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China (Shanghai) Ltd. - Site Office RM 2703A/B, 25 Tongxing Street CN-116001 Dalian CHINA Telephone: +86-188-41181669 Telefax: +86-411-39869768 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Kongsberg Maritime China (Shanghai) Ltd. - Site Office Rm 2002, North Tower, 3 Huaqiang Road CN-510623 Guangzhou CHINA Telephone: +86-188-19825000 Telefax: +86-20-38039496 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China Ltd. No.6 Building, 401 Chuanqiao Road CN-201206 Shanghai CHINA Telephone: +86-21-31279888 Telefax: +86-21-31279555 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime China Zhenjiang Ltd. 1-2F No. 711, Changjiang Road CN-212000 ZhenJiang CHINA Telephone: +86-511-81983222 Telefax: +86-511-81983299 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Long Ji Hong Kong Industrial Co. Ltd. 1202 China Merchant Plaza (East Building), No. 333 Chengdu Road (North) CN-200041 Shanghai CHINA Telephone: +86 21 3210 0553 Preferred Makers represented: Optimarin AS
513_558_SR-Geo_2016.indd 521 07.08.2016 11:47:49
SALES REPRESENTATIVES - Geographical List
522
Radio Holland Hong Kong 806 Join in Hang Sing Centre, 71-75 Container Port Road Kwai Chung N.T., Hong Kong CHINA Telephone: +8522-4239007 Telefax: +8522-34805898 Contact person: Stephen Chan Preferred Makers represented: Comrod Communication A/S Smith Marine & Offshore Technology Co.,Ltd. Room 3903, Shimao Bay R3 building Zhifu District, Yantai Shandong Province CHINA Telephone: +86 (0)535 6288176-602 Telefax: +86 6288276 Contact person: Terry Tongdacheng Preferred Makers represented: Parat Halvorsen A-S Tecway International (Marine) Ltd. RM.AB, 19/F, Yu Jia Bldg., 1336 Huashan Road, DR-Code: 3114941570 CN-200052 Shanghai CHINA Telephone: +86 21 6226 5267 Telefax: +86 21 6226 5015 Email: [email protected] Contact person: Mr. Yuda Zhang www.tecwayintl.com Preferred Makers represented: Brunvoll A.S Libra-Plast AS Tranberg A.S.
Tecway International Ltd. Room 2106, Ping an Building 24, Renmin Road, Zhongshan District CN-116001 Dalian CHINA Telephone: +86 411 8253 9175 Telefax: +86 411 8253 9187 Email: [email protected] Contact person: Mr. Xiao Ming Xu Preferred Makers represented: Brunvoll A.S Libra-Plast AS Tecway International Ltd. Room 1904, Tower 1, Dong-Jun Plaza, 828 - 836, Dongfeng Road East CN-5100800 Guangzhou CHINA Telephone: +86 20 8766 7085 Telefax: +86 20 8765 9436 Email: [email protected] Contact person: Ms. Jane Cheng Preferred Makers represented: Brunvoll A.S Libra-Plast AS
Alpha Marine Engineering Ltd. Salaminos 43 GR-166 74 Glyfada, Athens GREECE Telephone: +30 210 89 43 220 Telefax: +30 210 96 80 210 Email: [email protected] Contact person: Mr. Dimitris Perakis www.ame.gr Preferred Makers represented: Brunvoll A.S Maritime Partner AS Teamtec A/S Intra Mare Greece 4, Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 210 429 3843 Telefax: +30 210 429 3845 Email: [email protected] Contact person: George Gerassimou www.intramare.gr Preferred Makers represented: Norsafe AS Teknotherm Marine A/S Intra Mare Hellas 4 Skouze Street GR-185 36 Piraeus GREECE Telephone: +30 10 4293 843 Telefax: +30 10 4293 845 Email: [email protected] Contact person: Mr. George Gerassimou Preferred Makers represented: Libra-Plast AS
513_558_SR-Geo_2016.indd 528 07.08.2016 11:47:50
529
SALES REPRESENTATIVES - Geographical List
Kaminco Overseas Inc. Pireaus Branch: 57 Aki Miaouli P.O. Box 80 222 GR-18510 Piraeus GREECE Telephone: +301 45 28 240 Telefax: +301 42 94 887 Email: [email protected] Contact person: Sotirios Kaminis Preferred Makers represented: Finnøy Gear & Propeller AS Kongsberg Maritime Hellas SA 7 Gravias street GR-7 Gravias street Piraeus GREECE Telephone: +30 210 4117200 Telefax: +30 210 4117200 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
HONG KONGGlobal Mar-Tech Company Ltd. 21-25 Cheung Sha Wan Road HONG KONG Telephone: + 852 3520 4957. Mob. phone: +852 9454 3254 Telefax: +852 3520 4951 Email: [email protected] Contact person: CK Tang Preferred Makers represented: AF Offshore AeronMollier AS
Tecway (HK) Ltd. Flat 15&19, 10/F, Shatin Galleria, 18-24 Shan Mel Street, Fotan Shatin, New Territories HONG KONG Telephone: +852 2548 3118 Telefax: +852 2581 1302 Email: [email protected] Contact person: Mr. Harold Ko www.tecwayintl.com Preferred Makers represented: Brunvoll A.S Teamtec A/S Tecway International Ltd. Room 303, Sam Cheong Building, 216-220, Des Voeux Road HK-510080 Hong Kong HONG KONG Telephone: +852 2851 2138 Telefax: +852 2581 1302 Contact person: Harold Ko Preferred Makers represented: Libra-Plast AS
INDONESIABripindo Ciladak Commersial Estate, Building 404 P.O. Box 5/CCE SAK SEL ID-12560 Jakarta INDONESIA Telephone: 7801936/7802192 Telefax: 7860779 Preferred Makers represented: Masto Wire Service A/S PT. Assindo Perniagaan Internasional (API) Victoria Centre 3rd Floor, Jl. Sultan Hasanuddin No. 47-51 P.O. Box 4051 ID-12160 Jakarta INDONESIA Telephone: +62 21 72 55541 Telefax: +62 21 72 55546 Email: [email protected] Contact person: Mr. Bachtiar Sonda and Mr. Arnold Karauwan Preferred Makers represented: Teamtec A/S
NEW CALEDONIAHeros R. Zone Industrielle, Baic de Numbo-Lots 6 et 7 BP3267 NC-98846 Noumea NEW CALEDONIA Telephone: +687 28 59 69 Telefax: +687 25 22 47 Preferred Makers represented: Norsafe AS
NEW ZEALANDCeiling Works P.O. Box 70 NZ-WA 6023 Duncraig East LPO NEW ZEALAND Telephone: + 61 89 302 57 77 Telefax: + 61 89 302 57 88 Email: [email protected] Contact person: Mr. Jim Mc Inerney Preferred Makers represented: Libra-Plast AS
Radio Holland BV 8A Tuas Avenue 12 SG-2263 Singapore SINGAPORE Telephone: +65-8622218 Telefax: +65-8622430 Contact person: Mr. Danny Tan Preferred Makers represented: Comrod Communication A/S Scanvik Marine Services Pte. Ltd. 31B Benoi Road, pioneer lot Singapore SINGAPORE Telephone: +65-67 95 78 87 Telefax: +65-67 95 89 08 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Anda-Olsen AS Brunvoll A.S Finnøy Gear & Propeller AS Scanvik Marine Services Pte. Ltd. SINGAPORE Telephone: +65 6863 2070 Telefax: +65 6261 5255 Email: [email protected] Contact person: Ronnie Tay Preferred Makers represented: Libra-Plast AS Springer-Ems Pte. Ltd. (Helideck Lighting) 66 Tannery Lane, #06-05 Sindo Building SG-347805 Singapore SINGAPORE Telephone: +65 67453300 Telefax: +65 67466374 Email: [email protected] Preferred Makers represented: Tranberg A.S.
SOUTH AFRICATamarix Marine CC t/a Sea Power Tyger Valley 7536 P.O. Box 3723 Cape Town SOUTH AFRICA Telephone: +27-21-551 9192 Telefax: +27-21-552 9326 Email: [email protected] Contact person: Piet de Klerk Preferred Makers represented: Finnøy Gear & Propeller AS Norsafe AS Teknotherm Marine A/S
Oceanist Deniz Araclari Muh. Mum. San ve Tic. LTD STI. Kavacik Mah. F.S.M. Cad., Yayabeyi Sk. No:2/13 TR-34810 Beykoz / Istanbul TURKEY Telephone: +90 216 701 19 03 Telefax: +90 216 701 19 23 Email: [email protected] Contact person: Mr. Umur CULHA www.oceanist.com Preferred Makers represented: Libra-Plast AS Oceanist Engineering Ltd. Kavacik Mah. F.S.M. Cad. Yayabeyi Sk. No.: 2/13 TR-34810 Beykoz - Istanbul TURKEY Telephone: +90 216 701 1903 Telefax: +90 216 701 1923 Email: [email protected] Contact person: Umur Culha Preferred Makers represented: Brunvoll A.S Parat Halvorsen A-S Onursan Co. Ltd. Icmeler, Rauf Orbay Cad., Gul Sok. No. 8 Turzla - Istanbul TURKEY Telephone: +90 216 395 82 27 Telefax: +90 216 395 04 60 Email: [email protected] Contact person: Mr. Barbaros Onur www.onursan.net Preferred Makers represented: Norsafe AS
Senak Marine Ind. and Trading Co. Ltd. Senak Denizcilik San san ve tic ltd sti, Aydintepe Mah. Sahilyolu Cad., Denizciler Tic. Mrkz. No:25 Kat:2 TR-43 34947 Tuzla Istanbul TURKEY Telephone: +90 216 392 69 92. Mob. phone: +90 532 287 54 40 Telefax: +90 216 392 65 05 Email: [email protected] Contact person: Hasan Ufuk Gölek www.senak.com Preferred Makers represented: AF Offshore AeronMollier AS Teknotherm Marine HVAC - Istanbul Repr. office Yala Mah. Vatan Meka is Merkezi, No: 58/15 Tuzla - Istanbul TURKEY Telephone: +90 533 332 83 97 Email: [email protected] Preferred Makers represented: Teknotherm Marine A/S
UNITED ARAB EMIRATESAxon Group DMCCO / Axon Offshore Group S.A. Dubai Maritime City, P.O. Box 124974 Dubai UNITED ARAB EMIRATES Telephone: +971 505 054584 Email: [email protected] Contact person: Rajiv Saigal Preferred Makers represented: Brunvoll A.S
513_558_SR-Geo_2016.indd 550 07.08.2016 11:47:51
551
SALES REPRESENTATIVES - Geographical List
Bridon Middle East P.O. Box 16931 Dubai UNITED ARAB EMIRATES Telephone: 084-35129 Telefax: 084-35689 Preferred Makers represented: Masto Wire Service A/S Comrod Communication Jebel Ali Free Zone P.O Box 18214 Duvai UNITED ARAB EMIRATES Telephone: +971 50 531 6723 Telefax: +971 4 802 7001 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Consilium Middle East (FZC) B3-22, SAIF Zone P.O.Box 8018 Sharjah UNITED ARAB EMIRATES Telephone: +971 6 55 70 740 Telefax: +971 6 55 70 741 Email: [email protected] Contact person: Mr. K.P. Krishnan www.consilium.ae Preferred Makers represented: Teamtec A/S
KDU Worldwide Technical Services Fzc P6-171, Saif Zone P.O. Box #9567 Sharjah UNITED ARAB EMIRATES Telephone: +971-6-5575480 Telefax: +971-6-5575490 Email: [email protected] Contact person: Ralph Cabral, Director Technical Preferred Makers represented: AF Offshore AeronMollier AS Kongsberg Maritime Middle East DMCCO Dubai Investment Park, Falcon House Dubai UNITED ARAB EMIRATES Telephone: +971-4-8991800 Telefax: +971-4-8991801 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS NOREQ FZE Office No. 6WA 633, Dubai Airport Freezone PO Box : 121707 Dubai UNITED ARAB EMIRATES Telephone: +971 4 2602748 Telefax: +971 4 2602750 Email: [email protected] Preferred Makers represented: Harding Safety AS
513_558_SR-Geo_2016.indd 551 07.08.2016 11:47:51
SALES REPRESENTATIVES - Geographical List
552
Ocean Fair International LLC Dubai Investments Park - Phase II, Near Abu Dhabi Pipe Factory (ADPF) Dubai UNITED ARAB EMIRATES Telephone: +971 4 8849555 Telefax: +971 4 8849557 Email: [email protected] www.oceanfair.com Preferred Makers represented: EuroRope Marine AS Stahl Middle East FZE, R. P.O. Box 17784 Dubai UNITED ARAB EMIRATES Telephone: +971 4 8835855 Telefax: +971 4 8834685 Email: [email protected] Preferred Makers represented: Tranberg A.S. Ulmatec DMCCO Office 604, Maritime Business Centre Building, Dubai Maritime City (DMC) Dubai UNITED ARAB EMIRATES Telephone: +971 4 4476669 (Office) Telefax: +971 4 3688526 Email: [email protected] Contact person: Rajesh Kamath www.ulmatec.no Preferred Makers represented: Finnøy Gear & Propeller AS
UNITED KINGDOMBridon International - Certex Doncaster, Carr Hill GB-DNU 8DG Doncaster, South Yorkshire UNITED KINGDOM Telephone: +44-302-344010 Telefax: +44-302-640449 Preferred Makers represented: Masto Wire Service A/S Christie + Gray Ltd Morley Road, Tonbridge GB-TN9 1RA Kent UNITED KINGDOM Telephone: +44 1732 371100 Telefax: +44 1732 359666 Email: [email protected] www.christiegray.com Preferred Makers represented: Centa Transmisjoner A.S. Forbes Refrigeration Ltd. Station Road GB-AB41 9AY Ellon, Aberdeenshire, Scotland UNITED KINGDOM Telephone: +44-1358-72 08 53 Telefax: +44-1358-72 18 98 Contact person: Gordon Forbes Preferred Makers represented: Teknotherm Marine A/S Hydroid Europe Unit 3, Basepoint Enterprise Centre Anderson’s Road GB-SO14 5FE Southampton UNITED KINGDOM Telephone: +44-2380-682-388 Telefax: +44-2380-682-389 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
513_558_SR-Geo_2016.indd 552 07.08.2016 11:47:51
553
SALES REPRESENTATIVES - Geographical List International Safety Products Ltd Orrell Mount, 159 Hawthorne Road GB-L20 6JU Bootle UNITED KINGDOM Telephone: +44 (0)151 922 2202 Email: [email protected] www.ispl.co.uk Preferred Makers represented: Hansen Protection AS Kongsberg GeoAcoustics Ltd Shuttleworth Close, Gapton Hall Industrial Estate GB-NR31 0NQ Great Yarmouth UNITED KINGDOM Telephone: +44 1493 600 666 Telefax: +44 1493 651 100 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd Campus 1, Aberdeen Innovation Park, Balgownie, Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd Campus 1, Aberdeen Science & Tecnology Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 12 24 22 65 00 Telefax: +44 12 24 22 65 01 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Kongsberg Maritime Ltd. 11 The Briars Waterberry Drive, Waterlooville GB-PO7 7YH Portsmouth UNITED KINGDOM Telephone: +44 023 9224 7800 Telefax: +44 023 9224 7808 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. Airport Industrial Estate, Wick GB-KW1 4QS Caithness UNITED KINGDOM Telephone: +44 1 955 603 606 Telefax: +44 1 955 607 520 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Ltd. - Offshore Campus 1 , Aberdeen Innovation Park, Balgownie Road, Bridge of Don GB-AB22 8GT Aberdeen, Scotland UNITED KINGDOM Telephone: +44 1224 226 500 Telefax: +44 (0)1224 226 501 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Training & Simulation Centre 15 Abercrombie Court, Prospect Road, Arnhall Business Park GB-AB32 6FE Westhill, Aberdeen UNITED KINGDOM Telephone: +44 1224 617 670 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
513_558_SR-Geo_2016.indd 553 07.08.2016 11:47:51
SALES REPRESENTATIVES - Geographical List
554
Marine Systems (UK) Ltd. 18 Heron Close, Sawbridgeworth GB-CM21 0BB Herts UNITED KINGDOM Telephone: +44 7889 0287 29 Contact person: Basil Black Preferred Makers represented: Finnøy Gear & Propeller AS MRH Marine Ltd. No. 3 Crofthead Mill, Lochlibo Road, Neilston GB-G78 3NA Glasgow UNITED KINGDOM Telephone: +44-141 880 6939 Telefax: +44-141 881 3600 Email: [email protected] Contact person: Mr. Bill Higginbotham Preferred Makers represented: Libra-Plast AS Ships Electronic Services Ltd. Waterside Court, Neptune Close GB-ME2 4NZ Rochester, Kent UNITED KINGDOM Telephone: +44 1634-29 55 00 Telefax: +44 1634-29 55 37 Email: [email protected] Contact person: Ms. Stephen Pedgrift Preferred Makers represented: Comrod Communication A/S Stahl Ltd., R. Stahl House, 43 Elmdon Trading Estate GB-B37 7HE Birmingham UNITED KINGDOM Telephone: +44 121 767 6400 Telefax: +44 121 767 6490 Email: [email protected] Preferred Makers represented: Tranberg A.S.
Wear Dock & Engineering Co. South Dock, Sunderland GB-SR1 2EE Tyne & Wear UNITED KINGDOM Telephone: +44-191 567 4749 Telefax: +44-191 510 0765 Email: [email protected] Contact person: Harry Wilson www.weardock.co.uk Preferred Makers represented: Brunvoll A.S
UNITED STATESCertex P.O. Box 18428 US-TX 77223 Houston UNITED STATES Telephone: 713-921 4101 Telefax: 713-931 4493 Contact person: Tom Hana Preferred Makers represented: Masto Wire Service A/S Comrod Inc. 12830 Triskett Road US-44111 Cleveland, Ohio UNITED STATES Telephone: 216-252-6610 Telefax: 216-252-6615 Email: [email protected] Preferred Makers represented: Comrod Communication A/S Diamond Braid International P.O. Box 6540 US-TX 77325 Kingwood UNITED STATES Telephone: 888-643-4096 Email: [email protected] www.diamondbraidintl.com Preferred Makers represented: EuroRope Marine AS
513_558_SR-Geo_2016.indd 554 07.08.2016 11:47:51
555
SALES REPRESENTATIVES - Geographical List Environmental Marine Partners, LLC 915 8th street unit #204 US-FL 33139 Miami Beach UNITED STATES Telephone: +1 78 63 59 46 35 Telefax: +1 78 63 59 46 35 Email: [email protected] Contact person: Bjørn Erik Hansen Preferred Makers represented: Parat Halvorsen A-S FPS-Corpus Christi 4221 Beacon Street US-TX 78405 Corpus Christi UNITED STATES Telephone: (361) 289-9102 Telefax: (361) 289-1421 Preferred Makers represented: Hansen Protection AS FPS-Houston 8050 Harrisburg Blvd. US-TX 77012 Houston UNITED STATES Telephone: (713)-924-9600 Telefax: (713) 923-6272 Email: [email protected] www.fps-usa.com Preferred Makers represented: Hansen Protection AS FPS-New Orleans 821 Industry Road US-LA 70062 Kenner UNITED STATES Telephone: (504) 466-8003 Telefax: (504) 469-9922 Email: [email protected] Preferred Makers represented: Hansen Protection AS
GlobalSim Inc. 12577 South 265 West, Suite 3A, US-84020 Draper, Utah UNITED STATES Telephone: +1 800 979 9728 Telefax: +1 801 571 9535 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS GTA Marine 33 Krauser Road, Downingtown US-PA 19335 Thorndale UNITED STATES Telephone: +1 610 321 0300 Telefax: +1 610 321 0609 Email: [email protected] Contact person: Mr. Gerard Bourgeault / Mob: +1 610 999 1840 www.gtamarine.com Preferred Makers represented: Teamtec A/S Hydroid Inc. 6 Benjamin Nye Circle US-MA 02559-4900 Pocasset UNITED STATES Telephone: +1 508 563 6565 Telefax: +1 508 563 3445 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Issaquah Trading 4622 174th PL SE US-WA 98006 Bellevue UNITED STATES Telephone: +1 425 830 4154 Email: [email protected] Contact person: Mr. Per N. Thomassen Preferred Makers represented: Teamtec A/S
513_558_SR-Geo_2016.indd 555 07.08.2016 11:47:51
SALES REPRESENTATIVES - Geographical List
556
Issaquah Trading 4622 174th Pl. Se. US-98006 Bellevue UNITED STATES Telephone: +1 425-830-4154 Email: [email protected] Preferred Makers represented: Teamtec A/S Kongsberg Maritime Inc. 150 James Drive East, Suite 160 US-LA 70087 Saint rose UNITED STATES Telephone: +1 504 712 2799 Telefax: +1 504 712 7986 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Inc. 5373 W. Sam Houston Parkway N, Suite 200 US-TX 77041 Houston UNITED STATES Telephone: +1 713 329 5580 Telefax: +1 713 329 5581 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS Kongsberg Maritime Simulation Inc. 70 Essex Street P.O. Box 180 US-CT 06388-0180 West Mystic UNITED STATES Telephone: +1 860 536 1254 Telefax: +1 860 536 0923 Email: [email protected] Preferred Makers represented: Kongsberg Maritime AS
Noreq LLC 3410 W. Dallas Ste. 239 US-TX 77019 Houston UNITED STATES Telephone: +1 713 589 3161 Email: [email protected] Preferred Makers represented: Harding Safety AS Ocean Power & Equipment Co. 1140 Bloomfield Avenue, Suite 107 US-NJ 07006 West Caldwell UNITED STATES Telephone: +1 973 575 5775 Telefax: +1 973 575 5850 Email: [email protected] Preferred Makers represented: Optimarin AS Pilot Marine 2751 Parsons Rest US-FL 32309 Talahassee UNITED STATES Telephone: (850) 893-5730 Telefax: (850) 668-0822 Email: [email protected] Contact person: Mr. Jon Denton Smith Preferred Makers represented: Comrod Communication A/S Radio Holland USA 8943 Gulf Freeway US-TX 77017 Houston UNITED STATES Telephone: +1-713-9433325 Telefax: +1-713-9433802 Email: [email protected] Contact person: Johnny Hamby Preferred Makers represented: Comrod Communication A/S
513_558_SR-Geo_2016.indd 556 07.08.2016 11:47:51
557
SALES REPRESENTATIVES - Geographical List
Scan Pacific Marine, LLC 909 West Esplanade Avenue, Suite 104 US-LA 70065 Kenner UNITED STATES Telephone: +1 504 466 5788 Telefax: +1 504 466 5703 Email: [email protected] Contact person: Sandra Kleven www.scanpacificmarine.com Preferred Makers represented: Norsafe AS Ships Machinery International Inc. 12380 s.w. 130 th street US-33186 Miami, Florida UNITED STATES Telephone: +1 305 234 5693 Telefax: +1 305 234 5694 Email: [email protected] Contact person: Arthur Dewey www.shipsmachinery.com Preferred Makers represented: Brunvoll A.S Finnøy Gear & Propeller AS SMI Ships Machinery International, Inc. 13005 SW 124 Ave US-FL 33186 Miami UNITED STATES Telephone: +1 305 234 5693 Telefax: +1 305 234 5694 Email: [email protected] Contact person: Mr. Arthur Dewey Preferred Makers represented: Maritime Partner AS
Stahl Inc., R. 9001 Knight Road US-TX 77054 Houston UNITED STATES Telephone: +1 713 7929300 Telefax: +1 713 7929301 Email: [email protected] Preferred Makers represented: Tranberg A.S.
VENEZUELAOmega SSP Calle 61 Entre Av. 3E Y 3F, No. 3E-49, Sector Las Mercedes, Maracaibo 4002 Zulia VENEZUELA Telephone: +58 261 792 2616 Telefax: +58 261 792 5268 Email: [email protected] Contact person: Mr. John Ketchum Preferred Makers represented: Norsafe AS
VIETNAMMTS Co., Ltd (Marine Trade Services Ltd) R 1207 Vuon Xuan Building, 71 Nguyen Chi Thanh Street Hanoi VIETNAM Telephone: +84 4 62 75 86 22 Telefax: +84 4 62 75 86 23 Email: [email protected] Contact person: Mr. Hoang Tuan Anh Preferred Makers represented: Libra-Plast AS
513_558_SR-Geo_2016.indd 557 07.08.2016 11:47:52
SALES REPRESENTATIVES - Geographical List
558
MTS International JSC R1207 - Vuon Xuan Bld., 71 Nguyen Chi Thanh Str. Hanoi VIETNAM Telephone: +84 4 7623499. Telefax: +84 4 7623476 Email: [email protected] Contact person: Mr. Hoang Tuan Anh Preferred Makers represented: AF Offshore AeronMollier AS Teamtec A/S Tranberg A.S. Phong Viet Co. Ltd. 45 Road No. 32, Tanphong Ward, District 7 HoChiMinh City VIETNAM Telephone: +84 8 377 17 179 Telefax: +84 8 377 15 791 Email: thuan2phongvieco.com Contact person: Tran Dinh Thuan www.phongvietco.com Preferred Makers represented: Norsafe AS
513_558_SR-Geo_2016.indd 558 07.08.2016 11:47:52
559
Foreign Factory / Country Referance inProducer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent
FOREIGN FACTORIES /PRODUCERS / SUPPLIERS
REPRESENTED
559_562_Ag_2016.indd 559 07.08.2016 11:48:02
560
Foreign Factory / Country Referance in Producer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent
A.B. Marine d.o.o. Croatia Alu Design & Services ASAcco Trade Spain Alu Design & Services ASAquafides Austria Alfsen og Gunderson ASAquanautic Agencies Pte. Singapore Alu Design & Services ASArmatech FTS GmbH Germany Alfsen og Gunderson ASASV Stuebbe GmbH & Co. KG Germany Alfsen og Gunderson ASAtlas HF Iceland Alu Design & Services ASBehrens Pumpenfabrik GmbH & Co., Henrich
Germany MA PG Flow Solutions AS
Benson Marine Services Pvt.Ltd. India Alu Design & Services ASBitzer Kühlmaschinenbau GmbH Germany Teknotherm Marine A/SBock Kältemaschinen GmbH Germany Teknotherm Marine A/SBoll & Kirch Filterbau GmbH Germany Alfsen og Gunderson ASBornemann GmbH, Joh. Heinr. Germany MA PG Flow Solutions ASBrook Marine Equipment Trading Company LLC
United Arab Emirates Alu Design & Services AS
Carrier Transicold United States MA Teknotherm Marine A/SCenta Antriebe Kirschey GmbH Germany MA Centa Transmisjoner A.S.Chemineer, Ltd. United Kingdom MA Alfsen og Gunderson ASDanaher Motion Sweden MA Centa Transmisjoner A.S.Danfoss Marine Systems A/S (IPH) Denmark Teknotherm Marine A/SDickow Pumpen KG Germany Alfsen og Gunderson ASEDUR Pumpenfabrik GmbH Germany Alfsen og Gunderson ASFeluwa Pumpen GmbH Germany PG Flow Solutions ASFertigung GmbH, Wilhelm Sander Germany Meson ASFrigidaire United States Teknotherm Marine A/SHoenderop BV, P. Netherlands, The Alu Design & Services ASHyde Marine United States PG Flow Solutions ASIn-Mar Solutions Inc. United States Alu Design & Services ASKinetico Inc. United States MA Alfsen og Gunderson ASKral-Lustenau Austria MA PG Flow Solutions ASMalmedie Antriebstechnik GmbH. Germany MA Centa Transmisjoner A.S.Marant Polska Sp. z o.o. Poland Alu Design & Services ASMarine & Offshore Equipment GmbH & Co
Germany Alu Design & Services AS
Mayekawa Mfg. Co. Japan MA Teknotherm Marine A/SMeson AB Sweden MA Meson ASMeson AB Sweden MA Meson ASMeson ApS Denmark MA Meson ASMeson Far East Singapore MA Meson ASMeson s.r.l. Romania MA Meson AS
559_562_Ag_2016.indd 560 07.08.2016 11:48:02
561
Foreign Factory / Country Referance inProducer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent
Meson Shanghai Chile MA Meson ASMeson Spain SL Spain MA Meson ASMeson Valves BV Netherlands, The MA Meson ASMRU Air fair Germany MA Fremo ASNemomarin TIC. MÜH. Denizcilik A.S. Turkey Alu Design & Services ASOBL Dosing Pumps Italy Alfsen og Gunderson ASOffshore & Industrial Security Technology Brokers
Mexico Alu Design & Services AS
PG Construction AS Norway MA PG Flow Solutions ASPG Hydraulics AS Norway MA PG Flow Solutions ASProMinent GmbH Germany PG Flow Solutions ASRagazzini Italy Alfsen og Gunderson ASRamson AB Sweden Alfsen og Gunderson ASRefComp S.p.A Italy Teknotherm Marine A/SRexnord Antriebstechnik Germany MA Centa Transmisjoner A.S.Ruhrpumpen Manufacturing Plant Germany PG Flow Solutions ASRui Neiva Representacões Ltda. Brazil Alu Design & Services ASSamson Pumps AS Denmark PG Flow Solutions ASSBS Ltd. Russia Alu Design & Services ASSeepex GmbH + Co. KG Germany PG Flow Solutions ASSeibu Giken DST AB Sweden MA Alfsen og Gunderson ASSeybert & Rahier Germany Alfsen og Gunderson ASShanghai Wanji Trade Co., Ltd. China Alu Design & Services ASSondex A/S Denmark MA PG Flow Solutions ASSpeck GmbH & Co. KG, Walter - Speck Pumpen
Germany MA PG Flow Solutions AS
Speck Triplex GmbH & Co. KG - Speck Triplex Pumpen
Germany MA PG Flow Solutions AS
Speck-Pumpenfabrik-Hilpoltstein Germany MA PG Flow Solutions ASSPX Airpel Filtration United Kingdom Alfsen og Gunderson ASSteinen Mfg. Co., Wm United States MA Fremo ASStelio Bardi SRL Italy Alu Design & Services ASSundyne Marelli Spain Alfsen og Gunderson ASThermon Europe B.V. Netherlands, The MA Tranberg A.S.Tideland Signal Ltd. United Kingdom MA Tranberg A.S.Tokyo Sangyo Co. Ltd., Infrastructure Dept. B
Japan Alu Design & Services AS
Wepuko Pahnke GmbH Germany PG Flow Solutions ASWinter.Pumpen GmbH Germany PG Flow Solutions ASXylem United States PG Flow Solutions ASYamada Europe (Holland) Netherlands, The Alfsen og Gunderson ASYork United Kingdom Teknotherm Marine A/S
559_562_Ag_2016.indd 561 07.08.2016 11:48:02
562
Foreign Factory / Country Referance in Producer / Supplier DIRECTORY OF SUPPLIERS MA = Main agent
559_562_Ag_2016.indd 562 07.08.2016 11:48:02
563
TRADE MARKS SUPPLIER
TRADE MARKS
563_568_TM_2016.indd 563 07.08.2016 11:48:43
564
TRADE MARKS SUPPLIER
ABS Saint-Gobain WeberAERON AF Offshore AeronMollier ASAG POTABLE WATER UNIT Alfsen og Gunderson ASAIRDEL Alfsen og Gunderson ASALLWEILER Parat Halvorsen A-SALUSAFE Maritime Partner ASALUTECH Alu Design & Services ASANDA POWER SOLUTIONS Anda-Olsen ASANELLO Fremo ASAPEX PUMPS Alfsen og Gunderson ASAQUA FILTERTEKNIKK Enwa Water Technology ASAQUAFIDES Alfsen og Gunderson ASARI ARMATUREN Parat Halvorsen A-SASCO FILTRI Alfsen og Gunderson ASASV STUEBBE Alfsen og Gunderson ASAUTOCHIEF Kongsberg Maritime ASAZIMUTH Brunvoll A.SBAILEY Anda-Olsen ASBANNER Anda-Olsen ASBEARING MASTER Kongsberg Maritime ASBEHRENS PG Flow Solutions ASBERGEN LTT Palfinger Marine Norway ASBOLL & KIRCH Alfsen og Gunderson ASBORNEMANN PG Flow Solutions ASBRUNVOLL Brunvoll A.SBSD Centa Transmisjoner A.S.BUOYANT WINCHLINE EuroRope Marine ASCALDER PG Flow Solutions ASCENTADISC Centa Transmisjoner A.S.CENTAFLEX Centa Transmisjoner A.S.CENTAJOINT Centa Transmisjoner A.S.CENTALINK Centa Transmisjoner A.S.CENTAMAX Centa Transmisjoner A.S.CENTASTART Centa Transmisjoner A.S.CENTAX Centa Transmisjoner A.S.CHEMINEER Alfsen og Gunderson ASCITY Ekornes Contract ASCOMROD Comrod Communication A/SDANAHER Centa Transmisjoner A.S.DANFOSS Parat Halvorsen A-SDANFOSS Fremo ASDARPS Kongsberg Seatex AS