NORTHVALE NORTHVALE KORTING LTD KORTING LTD …

Uxbridge Road | Melton Road | Leicester | LE4 7STT: 0116 266 5911 | F: 0116 261 0050 | E: [email protected]

LeicesterNorthvale Korting T: 0116 266 5911 www.northvalekorting.co.uk

F: 0116 261 0050 E: [email protected]

NK Engineering Services T: 0116 268 8130F: 0116 261 0050

BristolSmart Valve Services T: 0117 982 6714 www.smartvalves.co.uk


Telephone

Uxbridge Road|Melton RoadLeicester |LE4 7STT: 0116 266 5911|F: 0116 261 0050E: [email protected]

Smart Valves & Controls

Smart Valve Services

NORTHVALE KORTING LTD

NORTHVALEKORTING LTD NORTHVALE KORTING LTD

spec ia l is ts in f low cont ro l equ ipmentnorthvalekorting

Engineering

Services

7572 Northvale Korting 12pp Brolder Cover_NK Folder 25/08/2015 09:46 Page 1

Northvale Korting Global Contacts

UK & Ireland | Europe | Africa | Middle East | Asia | America | Australia

Visit our website for regional representation - www.northvalekorting.co.uk

The contents of this publication are presented for informational purposes only, and while every effort has been madeto ensure their accuracy they are not to be construed as warranties or guarantees, expressed or implied, regardingthe products or services described herein or their use or applicability. All sales are governed by our terms andconditions, which are available on request. We reserve the right to modify or improve the designs or specifications ofsuch products at any time without notice. Neither Northvale Korting Limited nor any of their affiliated entities assumeresponsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use andmaintenance of any product remains solely with the purchaser.

Bespoke Flow Control Products


1

Northvale Korting was formed bythe amalgamation of NorthvaleEngineering and KortingInternational in 1985.

From its modern well equippedoffices and factory in Leicesterthe company produces a widerange of quality products that itsells into the Chemical,Petrochemical, Pharmaceutical,Food & Beverage, Water &Waste Water, Oil & Gas, Marine,Automotive, H&V and IndustrialProcess Markets.

Introduction

Northvale Engineering began manufacturing and Supplying ProcessControl Valves and Fluid handling products in 1968.

The Korting name has been associated with Ejectors for over 100 years, although designs and applications have changed over the years, Korting Fluid Jet equipment continues to provideeffective and sometimes the only practical solution to many Industrial problems.

7572 Northvale Korting 12pp Brolder Inners_NK 8pp section 24/08/2015 14:11 Page 1

2

Markets

Chemical | Petrochemical | Pharmaceutical | Food & Beverage | Water

Waste Water | Oil & Gas | Marine | Automotive | H&V & Industrial Process


3

About

Customer ServiceNorthvale Korting is determined to provide a technical solution, which significantlyimproves the operating environment and optimises the efficiency of our customersinstalled assets. Our Sales department consists of a highly focused and experiencedteam of engineers who can respond quickly to any customer request. Valve or Fluid Jetproduct sizing and selection is computerised and customers can be provided with fullydocumented quotations at proposal stage.

Information relating to the following areas is available for all Northvale Korting productsto ensure complete Customer Service satisfaction:

Storage & HandlingInstallationOperation & MaintenanceHealth & Safety

Design & EngineeringOur Technical department fully utilises computer aided design equipment and arecapable of sizing and developing Valves and Fluid Jet products for a wide range ofprocess applications. We can also test product performance characteristics againstdesign parameters.

Production ControlNorthvale Korting operate a fully integrated computer controlled manufacturing system,which ensures we can promptly supply all our customers precise needs.

ManufacturingAll aspects of machining, fabrication, assembly and testing are controlled at every stage.A range of CNC machines are used to ensure component accuracy and repeatability,where 100% hydraulic testing provides our guarantee of complete satisfaction.

Quality AssuranceNorthvale Korting operates a Quality Management System in accordance with ISO9001:2008, accredited by LRQA certificate no LRQ0850104. We are committed in ourquest for excellence at all levels of our activity and welcome ideas from customers in ourpursuit of achieving this objective.


4

Control Valve Primary Functions & Applications

Control the flow of primary heating fluid

Control the pressure of the media in distribution lines at precise operating levels

Used in conjunction with flowmeters to accurately control flow of media

Bellows sealed version for critical installations

Three port valves for mixing / diverting duties

HVAC Temperature Control on Air Handling Units

Vessel Heating / Cooling Temperature Control

Steam, Air or Fluid Pressure Reduction

Heat Exchanger Controls

Electric or Pneumatic Actuation

Norval Non-Return Valve Primary Functions & Applications

Allow flow within a system in the desired direction only

Prevent contamination of liquids already in a system

Prevent damage to pipework or components

Between flanges, gunmetal or stainless steel body screwed connections, flanged body, CIP RJT or IDF Stainless Steel housing

Pump Discharge & Multi-Pump Installation

Foot Valve, Sump or Boreholes

Tank Venting

Aggressive Liquid Applications

Fire Systems, Jockey Pump Pressurisation

CIP Systems

Valves

Valve Open

Diaphragm

Valve Closed

Cone


5

Korting Fluid Jet Primary Function & Applications

The Korting Fluid Jet range is a group of products, most of which operate on the ejector principle. This means that they have no moving parts and generally utilise a pressurised motive fluid such as water, steam or compressed air to drive them.

A range of typical applications are shown below and the benefits of using this type of equipment include:

No moving parts or electric power and therefore minimal maintenance

Simple to install and locate in restricted or remote spaces and hazardous zones

Self-priming therefore ideal for intermittent use

Can be manufactured in most materials, size range from 10mm - 500mm NB

Pumping solids& slurries fig.1/fig.1a

Agitating & mixing tank liquids fig.2

Pumping Liquids fig.3

Pumping & Diluting Concentrates

Bilge Emptying

Ship Deballasting

Bund & Pit Emptying

Blending tank Liquids

Priming & start up evacuationCreating process vacuum

Aeration & gas entrainment

Direct steam injection heating of liquids

Recycling & recompressing gases

Direct contact condensing of steam / air mixtures

Fluid Jet

fig.3

fig.1

fig.2

fig.1a

Korting Liquid Jet Eductor ApplicationKorting Liquid Jet Mixing Eductor Application

JET PUMP

DISCHARGE

SUCTION

Korting Liquid Jet Solids Eductor

MOTIVE

MOTIVE

DISCHARGE

WASHDOWNNOZZLE

KORTINGLIQUID

JETMIXING

EDUCTOR

MOTIVE

PUMP


6

Product Range

Electro PneumaticPositioner

Electronic PositionTransmitter

Electronic ValvePositioners

Pneumatic ValvePositioners

Solenoids & Relays Air Filter Regulators

Bossmatic Control ValvesSizes 15mm - 150mm Cast Iron, cast steel or stainless steel body Water2 Way or 3 Way Screwed or flanged connections OilOn/Off or modulating Flanged PN16/25/40 or ANSI125/150/300 GasPneumatic or electric P/P or I/P Positioners AirCompact Rugged construction SteamExtended service life Bellows seal optionProven reliability High turn down ratio’s

Ancillary Products To Suit The Bossmatic Control Valve

Minimatic Control ValvesSizes 15mm - 50mm Gunmetal or Stainless Body Water2 Way or 3 Way Screwed or flanged connections OilOn/Off or modulating PN6 - PN40 GasPneumatic or electric P/P Positioners AirCompact Light but rugged construction Steamam

Angle Seat Piston ValvesSizes 15mm - 50mm Stainless Steel Construction Water2 Way Screwed connections OilOn/Off or modulating PN16 Rating GasPneumatic Operation I/P Positioners AirCompact Light but rugged construction Steam

Angelery Hot Water Heater & Aerco ValvesPackaged/non-packaged unit Copper/copper alloy wetted parts Hospitals/HotelsPneumatic or electric valve Meets relevant pressure vessel codes Universities/SchoolsSelf cleaning - low maintenance Feed forward temperature control Food production factoriesHighly efficient Temperature controlled at + 2oC Military basesSub-cooled condensate Insulated vessel AbattoirsCompact size Pilot operated control valve Anywhere requiring hot water


7

Product Range

Norval Check ValvesSizes 1/2” - 24” 316 Stainless steel cone WaterVariety of body housings EPDM, Nitrile, Silicone or Flurocarbon OilUnique design Max 200oC operating temperature Air/GasTight shut off Operates in any orientation CIP VersionHigh quality materials No noise due to slamming Chemicals

Fluid Jet/EductorsBespoke Designs Various materials to suit application Water/Oil/ChemicalsPumping/Diluting Liquids De-ballasting/emptying bilges Sand/Powder/SaltPumping/Mixing Powders Transport sand/activated carbon granules Air/GasPumping/Mixing Oils Direct heating of water or other liquids GAC/Granules/Fly AshCreating Vacuum Aeration of liquids/desuperheating Steam

Actol ActuatorsRange - 13Nm to 180Nm Durable aluminium housing Building servicesIP66 Enclosure Adjustable travel stops Process automationTwo standard limit switches Single phase, 3 phase or DC motors M&E systemsQuarter turn 4 - 20mA Positioner option Remote plant controlBattery back-up option To suit Ball, Butterfly and Plug valves H&V

Tilting Disc Check ValvesSizes 11/2” - 40” Carbon, Stainless or Alloy Steel body WaterWafer type body PN16 - 100 & ANSI150 - 300 AirOptional spring assisted disc Max 525oC operating temperature GasTight shut off Fast reaction to reverse flow SteamLightweigt Minimises noise due to slamming Other liquids

CalorifiersSizes 3” up to 12” Replacement tube bundles HospitalsAvailable in all types Materials to suit requirements Education establishmentsEasily replaceable parts Special sizes on request Government buildingsRequires lower heat input Low maintainance Office/Production facilities

For more Company information visit www.northvalekorting.co.uk


8

Products

Control Valves | Norval Non Return Valves | Fluid Jet Eductors

Self Acting Valves | Actol Actuators | Calorifiers | Valve Ancillaries | Industrial Water Heating


Northvale Korting Global Contacts

UK & Ireland | Europe | Africa | Middle East | Asia | America | Australia

Visit our website for regional representation - www.northvalekorting.co.uk

The contents of this publication are presented for informational purposes only, and while every effort has been madeto ensure their accuracy they are not to be construed as warranties or guarantees, expressed or implied, regardingthe products or services described herein or their use or applicability. All sales are governed by our terms andconditions, which are available on request. We reserve the right to modify or improve the designs or specifications ofsuch products at any time without notice. Neither Northvale Korting Limited nor any of their affiliated entities assumeresponsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use andmaintenance of any product remains solely with the purchaser.

Bespoke Flow Control Products


Uxbridge Road | Melton Road | Leicester | LE4 7STT: 0116 266 5911 | F: 0116 261 0050 | E: [email protected]

LeicesterNorthvale Korting T: 0116 266 5911 www.northvalekorting.co.uk


NK Engineering Services T: 0116 268 8130F: 0116 261 0050

BristolSmart Valve Services T: 0117 982 6714 www.smartvalves.co.uk


Telephone

Uxbridge Road|Melton RoadLeicester |LE4 7STT: 0116 266 5911|F: 0116 261 0050E: [email protected]

Smart Valves & Controls

Smart Valve Services

NORTHVALE KORTING LTD

NORTHVALEKORTING LTD NORTHVALE KORTING LTD

spec ia l is ts in f low cont ro l equ ipmentnorthvalekorting

Engineering

Services


NORTHVALE NORTHVALE KORTING LTD KORTING LTD …

Documents