North Atlantic Initiatives PRESENTED BY: Roy Grimes FAA Separation Standards Program Support, CSSI Inc. International Operators Conference | Tampa, FL | March 17 – 20, 2014 Monday, 17 March 2014; Session 4 (3:30 – 5:00)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
North Atlantic Initiatives
PRESENTED BY:
Roy Grimes
FAA Separation Standards Program Support, CSSI Inc.
International Operators Conference | Tampa, FL | March 17 – 20, 2014
Monday, 17 March 2014; Session 4 (3:30 – 5:00)
Briefing Objective
• Objective of the briefing is to:
• Review existing and planned North Atlantic initiatives that affect: – operator plans and programs for aircraft equipage and operation
with Comm/Nav/Surveillance systems and, – where applicable, State operator authorizations
2
North Atlantic Initiatives
.
North Atlantic Systems Planning Group
• Air Traffic Management Group (ATMG)
• Operations and Airworthiness Subgroup (OPS/AIR)
• Comm/Nav/Surveillance Group (CNSG)
• Safety Analysis & Reduced Separation Implementation Group (SARSIG)
• Implementation Management Group (IMG)
• North Atlantic Systems Planning Group (NAT SPG)
3
Major Working Groups
-
Websites & NAT Reference Documents
• ICAO European & North Atlantic (EUR/NAT) Office • www.paris.icao.int>>EUR & NAT Documents>>NAT Documents
– NAT Doc 007 (NAT Operations & Airspace Manual (2013) – NAT Operations Bulletins & NAT Region Update Bulletins – NAT Service Development Roadmap (SDR) – Planning documents supporting separation reductions & initiatives
• FAA NAT Resource Guide For US Operators: search on Google – Emphasis Items – Initiatives – Comm/Nav/Surveillance – NAT Airspace, etc.
4
ICAO and FAA Sites
-
Initiatives Currently Underway
• Reduced Longitudinal Separation Minimum (RLongSM) – 5-minute longitudinal separation applied between eligible pairs – Gander & Shanwick Control Areas – Eligibility: MNPS Authorization, FANS 1/A CPDLC & ADS-C
connection – Tracks to be loaded using RLongSM at a TBD future date
• Data Link Mandate (DLM) Phase 1 – 2 core OTS tracks (identified in OTS track message), FL 360-390
(inclusive) – Data Link authorization in accordance with State requirements – FANS 1/A (or equivalent) CPDLC & ADS-C operation required
5
RLongSM & DLM Phase 1
-
Initiatives Currently Underway
• 30 NM lateral, 30 NM & 50 NM longitudinal separation – Applied in New York Oceanic between eligible aircraft pairs – 30 NM requirements: RNP 4, CPDLC & ADS-C – 50 NM longitudinal requirements: RNP 10, CPDLC & ADS-C
• 50 NM lateral separation in Santa Maria Oceanic – Starting 6 March 2014, 50 NM lateral separation applied to aircraft
authorized RNP 10 (minimum) or RNP 4 – MNPS authorization required – Aircraft not authorized RNP 10 or RNP 4 will be accommodated
using 60 NM lateral separation
6
(continued)
-
Initiatives Currently Underway (cont.)
• Used currently in Canadian coastal regions and southern Greenland primarily to aid in enabling climb and descent
• Iceland and Portugal scheduled to implement ADS-B services in 2014
• Compliance required with EASA AMC 20-24 or equivalent • Avionics functionality compliant with DO 260, Do 260A or
DO 260B • NavCanada AIC 31/11 addresses operator requirements for
Operational Specifications or completion of an equipment survey • NavCanada AIC 29/13 supplements AIC 31/11 with Flight Crew
& ATC procedures
7
ADS-B Out (5-10 NM separation)
.
FANS 1/A (or equivalent) Data Link Mandate
• Equipage with and use of CPDLC and ADS-C required in DLM airspace with limited exceptions (e.g., State, Humanitarian)
• Objective: enhance comm, surveillance and ATC intervention capabilities to reduce collision risk
• Plan announced in ANSP AICs and FAA Notice in 4/Q 2013 • Non-DLM airspace: DLM not to be applied in NAT ATS
Surveillance Airspace, north of 80 north or, until regulatory action completed, in New York Oceanic
• NAT ATS Surveillance Airspace: surveillance provided by radar or ADS-B to suitably equipped aircraft (transponder/ADS-B Extended Squitter transmitter)
8
NAT DLM Plan Overview
-
NAT Data Link Mandate
• DLM Phase 2A: 5 Feb 2015 target date – DLM to be implemented on all NAT OTS tracks between FL 350-390
(inclusive). Operation in non-DLM airspace remains an option • NAT DLM Phase 2B: 7 Dec 2017 target date
– DLM to be applied in all NAT Region airspace between FL 350-390 (inclusive)…except specified non-DLM airspace
• NAT DLM Phase 2C: 30 Jan 2020 target date – To be applied in all NAT Region airspace at FL 290 and
above…except specified non-DLM airspace • See previous slide for non-DLM airspace
9
(continued)
.
NAT ATS Surveillance Airspace
10
Preliminary Depiction to be updated in 2014
.
Reduced Lateral Separation Minimum
• 25 NM lateral separation and ½ degree track spacing to be applied on designated tracks
• ½ degree waypoints to be used to define RLatSM tracks (e.g., 54 degrees-30 minutes North, 30 degrees West)
• Only RLatSM eligible aircraft will operate on RLatSM tracks and adjacent tracks
• Operators need to determine if their aircraft nav databases will need update with NAT ½ degree waypoints (NavCanada leading effort to make ½ degree waypoint data package available in November/December timeframe)
• Strategic Lateral Offsets (SLOP) will continue to be used
11
RLatSM trial provisions
.
RLatSM Trials
• ADS-C functionality includes: – Conformance monitoring alerts controller when reports do not match current flight
plan (monitors NEXT waypoint and NEXT PLUS 1) – ADS periodic contracts at specified intervals – ADS event contracts include the following:
• lateral deviation event (LDE) of 5 NM or less; • level range deviation event (LRDE) 300 ft. or less; and • waypoint change event (WCE) at compulsory reporting points.
• CPDLC provides enhanced ATC intervention capabilities
• Operator/Aircraft Requirements – MNPS authorization – RNP 4 authorization – CPDLC and ADS-C equipage and operation – All RLatSM CNS systems required to be operational
12
Enabling technology
.
RLatSM Trials
• RLatSM Phase 1 trial planned start date: 5 Feb 2015 – 25 NM lateral separation to be applied on three core OTS tracks
between FL 350-390 (inclusive) – RLatSM tracks to be identified in OTS track message
• RLatSM Trial Phase 2: target date 1/Q 2016 – RLatSM planned to be applied on all OTS tracks between
FL 350-390 (inclusive) • RLatSM Phase 3: target date is TBD
– RlatSM planned to be applied between eligible aircraft in the NAT Region between TBD FLs
13
(Trial Phases)
-
RLatSM Trials
• Pilots must understand ½ degree waypoint display on aircraft maps and FMCs
• Pilots must be disciplined in executing waypoint insertion procedures to avoid navigation errors – Will need to independently confirm correct insertion of degrees and
minutes of latitude and longitude for each waypoint – Will need to independently perform checks to compare Computer
Flight Plan to FMC track and distance • Pilots must be prepared to execute ICAO Doc 4444 contingency
procedures for turn-backs, diversions and for weather deviations to avoid conflict with other aircraft
14
Operator responsibilities
.
RLatSM Trials
• Pilots should maximize use of TCAS II (ACAS II) for situational awareness and collision avoidance – Provisions for operational TCAS II (ACAS II) under discussion
• Operator guidance and direction on RLatSM operations being developed in NAT SPG working groups
15
Operator Responsibilities (cont.)
.
MNPS to PBN Transition Plan
• 2013 – Use of RNP 10 as Navigation Specification (NavSpec) to qualify for
MNPS authorization endorsed in NAT Regional SUPPS – Use of MNPS NavSpec remains valid
• 2015 – Proposed for 1 Jan 2015: RNP 10 (minimum) and RNP 4 to replace
MNPS as NavSpec for NEW MNPS authorizations – Existing MNPS authorizations not affected – Date TBD: MNPS designation for NAT airspace will be replaced
with designation oriented to “Performance Based Operations” – Current proposal is: “NAT High Level Airspace”
16
Performance-based Navigation (PBN) transition
-
MNPS to PBN Transition Plan
• 2020 – All aircraft operating in NAT “PBO” airspace will be authorized
RNP 10 (minimum) or RNP 4 – MNPS NavSpec no longer valid
• State (country) authorization processes – Individual State authorization processes and documents will need to
be updated to reflect MNPS transition provisions – Operators will need to coordinate with their State authorities to
determine State requirements as transition progresses
17
Continued
.
Performance Based Comm & Surveillance
• Required Communication Performance (RCP) Type: a label (e.g., RCP 240) that represents values for communication transaction time, continuity, availability and integrity parameters
• Required Surveillance Performance (RSP) Specification: a set of ATS provisions, including communication services, aircraft and operator requirements (e.g. RSP 180) needed for surveillance performance within a defined airspace.
• NAT PBCS Implementation Plan being progressed by NAT SPG working groups. NAT CNS Group is the lead.
18
PBCS Implementation Plan
.
NAT PBCS Implementation
• RCP 240 and RSP 180 being used to assess CPDLC and ADS-C performance in NAT operations
• Provisions to incorporate RCP and RSP into operator data link programs and, where applicable, operator data link authorizations are being progressed in ICAO Panels and NAT SPG groups
• Suggest that operator groups remain informed on development of PBCS implementation plans
19
Status
.
Conclusion
• Operators need to remain informed on status of NAT projects
• ICAO EUR/NAT Office Website and FAA NAT Resource Guide For US Operators serve as sources for operator information
• NAT Doc 009 (NAT Service Development Roadmap (SDR)) posted on ICAO Paris EUR/NAT Office Website under NAT Documents
• SDR provides a listing of NAT initiatives along with schedules for their progression
20
Significant NAT initiatives progressing in 2014
.
Related Documents
