Contents 2 Body Styles 2 Valve Dimensions 3 Specifications 4 Valve Trim 6 Actuators 7 Model Code Norriseal Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Norriseal Series 2200 and 2220 control valves have been the standard for controlling fluids in the oil and gas industry since1966.Thehammer nut entryinto the valve body allows quick access for trim inspection. Both Series 2200 and 2220 valves can be furnished with a variety of trims and end connections (see table 7 on page 4 and table 5 on page 3). The Series 2200 has an open yoke which allows for the mounting of positioners, limit switches and other devices. It is also used in applications that require an exposed stem for accurate travel indication. The yoke allows the valve to be used for higher temperature ranges. The Series 2220 is the close-coupled or yokeless, space saving version of the Series 2200. This series is ideal for controlling liquids on compressor scrubbers and housed production separators where space is at a premium. Features ᔢ Patented spherical plug and matching seat gives precision seating alignment ᔢ Two types of throttling trim for precision control: modified per- centage and equal percentage ᔥ Hammer nut has extra thread engagement on the valve body to release any pressure within the body and allow safe removal of the bonnet/actuator during disassembly ᔢ Integral flange is provided on the bonnet to secure the hammer nut/bonnet to the valve body, improving safety when used in a corrosive atmosphere ᔢ Carbide, Stellite and soft seats are available for corrosion and high/low temperatures; other materials are available for NACE applications Series 2200 Series 2220 Contact Norriseal-WellMark today for more information about products and services HOUSTON: 713.466.3552 • MIDLAND: 432.238.3919 • OKLAHOMA CITY: 405.672.6660 • BROUSSARD: 337.837.3223 • KENEDY: 830.583.8112 [email protected]• NORRISEALWELLMARK.COM Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
8
Embed
Norriseal S 2200 2220 C497 V...Body ASTM A216 Gr. WCC ASTMA351 Gr. CF8M ASTM A352 Gr. LCC Bonnet ASTMA696/C 316 SST Hammer Nut ASTMA105 ASTMA350 Gr. LF2 316 SST Stem Nitronic 50 Packing
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Contents
2 Body Styles2 Valve Dimensions3 Specifications4 Valve Trim6 Actuators7 Model Code
Norriseal Series2200 and 2220Control Valves
Space-Saving Solution:Yokeless design fits tight separator and scrubber applications
Norriseal Series 2200 and 2220 control valves have
been the standard for controlling fluids in the oil and
gas industry since1966.Thehammer nut entry into
the valve body allows quick access for trim
inspection. Both Series 2200 and 2220 valves can be
furnished with a variety of trims and end connections
(see table 7 on page 4 and table 5 on page3).
The Series 2200 has an open yoke which allows
for the mounting of positioners, limit switches and
other devices. It is also used in applications that
require an exposed stem for accurate travel
indication. The yoke allows the valve to be used for
higher temperature ranges.
The Series 2220 is the close-coupled or yokeless,
space saving version of the Series 2200. This series
� Two types of throttling trim forprecision control: modified per-centage and equal percentage
� Hammer nut has extra threadengagement on the valve bodyto release any pressure withinthe body and allow safe removalof the bonnet/actuator duringdisassembly
� Integral flange is provided on the bonnet to secure thehammer nut/bonnet to the valvebody, improving safety whenused in a corrosive atmosphere
� Carbide, Stellite and soft seatsare available for corrosion andhigh/low temperatures; othermaterials are available for NACEapplications
Series2200
Series2220
Contact Norriseal-WellMark today for more information about products and services
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
NORRISEAL1
"F"
"F"/2
"G"
"F"/2
.75
NORRISEAL1
NORRISEAL1
"F"/2
"F"/2
"F""F"/2
3.88
"G" "G"
2NORRISEAL
2NORRISEAL
2NORRISEAL
"F"/2
"F"/2"F""F"
"F"/2"F"/2
"G""G" "G"
1.69
Body Size
Face to Face “F”
“G”Connection
Type
ANSI Rating
150 300 600 900/1500 2500
inches mm inches mm inches mm inches mm inches mm inches mm inches mm
1.00-inch T-body plug forangle flow with quickopening carbide trim.
body Styles and dimensions
body Styles
Globe, “T” Styles and Angle BodiesThe 1.00-inch comes in two styles: globe andT-body, allowing fluid to flow straight through thebody in a globe pattern or angle flow pattern byrepositioning the pipe plug (which comes in thebottom port) and replacing it in the upper port.Norriseal popularized the T-body in 1950 and itstill is the most popular style in the industry.
The 2.00-inch body comes in two styles, globe and angle.
Table 1: ValVe dimenSionS
* Angle 2.00“ screwed body not shown. “F” dimension = “F”/2.
** Standard NPT body is rated to ANSI 1500.
1.00“ Globe Body 1.00“ “T” Body(configured for angle flow)
2.00“ Globe Body 2.00“ Angle Body2.00“ NPT Connection
2.00-inch angle bodywith equal percentage
17-4 PH SST trim.
1.00“ NPT Connection
2.00“ NPT Connection 2..00“ Globe Body 2..00“ Angle Body
Contact Norriseal-WellMark today for more information about products and services
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
2200/2220 Std. WCC Mtl. -20 to 180°F (-29 to 82°C)2200/2220 Std. LCC Mtl. -40 to 180°F (-40 to 82°C)
2200 Opt. Mtl. -50 to 400°F (-45 to 204°C)2200 Opt. Mtl. -50 to 300°F (-45 to 149°C)
Specifications
Table 2: maTerialS oF ConSTruCTion
Table 3: operaTing TemperaTure*
* Optional seal material built valves can cover high or low temperature ranges, but not necessarily both.
* Pressure ratings are based on temperatures of -20 to 100° F (-29 to 38° C) with standard material.Consult factory for pressure ratings for temperatures other than those shown.(X) indicates end connections available.
Table 4: aCTuaTor
Table 5: body end ConneCTionS and preSSure raTingS*
ActuatorNumber
Maximum W. P. Size/Eff. Area Travelpsig bar sq. ins. cm. sq. ins. mm
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
Body Size Trim SizeFlow Coefficient (CV) Globe Body
Valve Opening – Percent of Total TravelQuick^
Opening
Modified Percentage (Flow Up) (Flow Down)
Inches mm Inches mm 10 20 30 40 50 60 70 80 90 100 100
Table 7: plug TypeS and SizeS Table 8: plug maTerial
* Consult factory for equal percentage and micro-groove trim values; Angle body
Note: (X) indicates sizes available
Fig. 9. 1.00” Series 2220 valve
Quick opening trim, flow up.
Fig. 10. 1.00” Series 2200valve with a no. 9 direct(spring opening) actuator.Throttle trim, flow up.
Throttle trim, flow up.
HAMMER NUT
.375”
INTEGRAL BONNET FLANGE
BONNET
O-RING
VALVE BODY
Fig. 11. Hammer Nut/BonnetBody EngagementOO
CC
OO
CC
OPENOPEN
Contact Norriseal-WellMark today for more information about products and servicesContact Norriseal-WellMark today for more information about products and services
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
Valve Trim (continued)
Table 9: maximum diFFerenTial preSSure (3-15 pSi )
Table 10: maximum diFFerenTial preSSure (6-30 pSi )
Trim Size Actuator Size
Gas SupplyPressure
Flow Under Seat Flow Over SeatThrottle Quick Opening
Direct Reverse Direct ReverseInches mm Number psig bar psig bar psig bar psig bar psig bar
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
OPEN
"A" DIA
VENT
"B"
OPEN VENT
"A" DIA
"B"
"A" DIA
VENT
"B"
VENT
"A" DIA
2.00 MAX
"B"
Table 11: Spring deSCripTion
Table 12: ShuToFF ClaSSiFiCaTion
actuators
Fig. 12Reverse Actuator
Series 2200
Fig. 13 Direct Actuator
Series 2200
ActuatorNumber Spring Rate Range Table No.
9AA 3 – 11 psi 9HA 6 – 30 psi 10
12HA 3 – 15 psi 9WM 6 – 30 psi 10
Metal SeatsANSI Class IV (ANSI/FCI 70-2-1998)
Leakage less than 0.01% of maximum valve capacity
Soft SeatsANSI Class VI (ANSI/FCI 70-2-1998)
Leakage less than one bubble per minute. (3/4” and 1” only)
Table 13: aCTuaTor dimenSionS
Body Size ActuatorNumber
Spring Description
A BDirect*
Spring CoverActuatorDiameter
Reverse Direct2200 2220 2200 2220
Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
10-2220S-36TGA-9AA 0.38AQCARB
Body/Bonnet Material CodeWCC/A696 –WCC/A696 N(1)
LCC/A350 LF2 P(1)
LCC/A350 LF2 QCF8M/316 S(1)
Code Actuator NumberAA,H A 9
HA, WM 12
Code Number“00” None
9 912 12EO Electric
Positioners (Electro-Pneumatic, Pneumatic and Digital), Airlock,Limit Switches, Solenoid Valve, Booster Relay, Filter Regulators, I/PTransducers, Pressure Controllers, Temperature Controllers, etc.
Size (Inches) Code1 102 20
2.06 212.56 26
Series CodeOpen Yoke 2200
Close Coupled 2220
Type CodeFlanged Raised Face RF
Flanged Ring Type Joint RJThreaded – NPT Female S
API Conn (RTJ) AJNone (No Valve Body) 00
(1) Suitable for NACE (2) 2” only(3) 1” only (4) Sold in Canada on ly
Note: 1”Series 2200/2220
is limited to 1.00” maximum trim size.
Note:• Tungsten-carbide and soft-seated trims are availableONLY with angular seating geometr y.
• For Equal % trim use code “AE” for 3/16” & code “BE”for ¼”, 3/8”, ½” and ¾” sizes.
.”1 dna ”¾sezis mirt ot detimil si ,WMHU ,mirt tfoS :etoN
Diaphragm Wetted CodeBuna Buna ABuna Low Temp. Buna MBuna Viton V
Positioners (Electro-Pneumatic, Pneumatic and Digital), Airlock, Limit Switches, Solenoid Valve, Booster Relay, Filter Regulators, I/P Transducers, Pressure Controllers, Temperature Controllers, etc.(1) Suitable for NACE (2) 2” only (3) 1” only (4) Sold in Canada only
Contact Norriseal-WellMark today for more information about products and services
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly
Model CodeModel CodeBODY END CONNECTIONS TRIM MATERIAL
BODY SIZE
VALVE SERIES
TRIM GEOMETRY & CHARACTERISTIC
TRIM ORIFICE SIZE
ACTUATOR SPRINGS
ACTUATOR SIZE
PACKING
Accessories:
SPECIAL COMP0NENTS
ANSI Class Code150 02300 07600 14900 21
1500 365000 502500 60
BODY RATING
Type CodePneumatic Reverse Acting (Fail Closed)
Pneumatic Direct Acting (Fail Open)Manual Handwheel
Verto Valve
FBT
Electric (Fail in Last Position) EV
ACTUATOR ACTION
Type CodeAngle A(2)
Globe G“T” T(3)
BODY STYLE
SEAL MATERIAL
� In-house engineering and technical support
� In-depth applications experience
� Award-winning innovation and ongoing
product development
� ISO 9001 certified manufacturing
� Over five decades of industry service
� Compliance with all industry standards
and specifications
� Responsive service and prompt delivery
� Field support available worldwide
Please contact your Norriseal-WellMark representative for more details and assistance in specifying the optimal solution for your application.
Why you can depend on genuine Norriseal-WellMark products
Tel: (780) 434-8566
Fax: (780) 434-4267
www.albertaoiltool.com
In Canada contact:
Contact Norriseal-WellMark today for more information about products and services
Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly