Rare Classic Iconic 1930 Norman Wright Bay Cruiser 36' - ALL STRUCTURAL COMPONENTS HAVE BEEN RE- ENGINEERED. Hull has been replanked with two layers, (one 9mm and one 6mm (15mm) ply), along with three layers of epoxy and glass fiber. New... Bow thruster, Fuel tank, water tanks x 3 all poly, shower, toilet, hydraulic steering, navigation lights, horn, port holes. All windows are new and professionally installed.. Cabin and rear cockpit roof has also had new 9mm ply and been glassed... Also with new solar, new mushroom vents and snorkel vents which are ducted to the engine area... Top of cabin is finished with nonslip, and the gloss paint is finished down the sides and around the windows to the deck level. The inside cabin and rear cockpit all have 6'4" head clearance. This project is 80% complete. Ready for the new owner to put their personal touch on the final fit out. Details: Name: SWIFTSHORE Launch Year: 1930 Length: 36’ - 10.98m Beam: 10’3” - 3.12m Designer: Norman Wright Builder: Norman Wright Hull Material: Fiberglass/GPR 15mmtimber Deck Material: Fiberglass/GPR timber Thrust er: Bow thruster Vetus Finish: Two-pack paint Fuel Tank: 450 litres Water Tank: 600 litres Shower: One Toilet: One Accommodation: Front cabin Berths: 3-4 Saloon: One Steering: Hydraulic new Engine: None Solar PV: One Location: Horizon Shores marina secure hardstand. Remarks: Fantastic, family bay cruiser with thousands of hours and dollars spent on this Norman Wright 1930s classic... Refitted with composite epoxy glass fiber and 14mm of new wood, including New Keel and skeg. Video of rebuild: https://youtu.be/Q10-jheHIQo Contact: Jim Close [email protected] M: 0418 368 985 www.boatbrokerpro.com Norman Wright 1930 Morton Bay Cabin Cruiser 36”…. A Classic QLD Yacht