Series PAF3000 NPP-E04-15 Process Pump Non-Metallic Exterior (No external metal parts are used.) Lightweight and Compact Max. discharge flow rate: 20 l /min (Automatic operation) Weight: 1.3 kg (air operated, without foot bracket) 116 mm 119 mm 140 mm Process Pump Body material Body material New PFA Diaphragm/Seal material Diaphragm/Seal material PTFE Body material New PFA Diaphragm/Seal material PTFE One pump is compatible with various fluids. One pump is compatible with various fluids.
2
Embed
Non-Metallic Exterior - SMC · Non-Metallic Exterior (No external metal parts are used.) Lightweight and Compact Max. discharge flow rate: 20 l/min (Automatic operation) Weight: 1.3
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
230 l/min (ANR) or lessUp to 1 m (inside the pump is dry)
Up to 4 m (with fluid inside the pump)
0.75 MPa50 million cycles (for water)0 to 90°C (with no freezing)0 to 70°C (with no freezing)
Horizontal (mounting on the bottom surface)Clean double packaging
Main fluid: Suction/Discharge portPilot air: Supply/Exhaust port
DryWet
Specifications
Note 1) The junction shaft for the diaphragm is made of stainless steel with a resin coating.Note 2) Values in the table are measured at room temperature using clean water.
Side cover
PFA
DiaphragmDenatured PTFE
Side cover
PPS
Series PAF5000• Non-metallic exterior (no metallic parts are used.)• Body material: New PFA• Diaphragm/Seal material: PTFE• Discharge flow rate: 45 l/min (automatic operation)