Nokia Morph Technology

MAHARISHI ARVIND INSTITUTE OF ENGINEERING. & TECHNOLOGY

APOWER POINT PRESENTATION

NOKIA MORPH TECHNOLOGYOn

Submitted in partial fulfillment of the requirement ofthe award of the degree of

Undertaken by:

Sumit Dayama

Roll-11EMTCS753

B.Tech, VIIIth Semester

Session: 2014-15

Under The Guidance of:

Mr. Narendra Kumar

Assistant Professor

MAIET

Bachlelor of Technology(B.Tech)

1

INTRODUCTION

o The “Nokia Morph” is a theoretical future device based on NANOTECHNOLOGY that might

enable future communication devices.

2

Morph also demonstrates how future mobile devices

might be stretchable, flexible, transparent and self

cleaning

• THE WORD “MORPH” MEANS :-

• Transform Quickly

• Change Shape

HISTORY The concept of NOKIA MORPH has been introduced to

the global world at the Museum of Modern Art (MoMA)

as part of the "Design and the Elastic Mind" exhibition.

The concept emerged through collaboration between

Nokia Research Center and Cambridge University

Nanoscience Center in the UK

3

NANOTECHNOLOGY 4

NANOTECHNOLOGY means “The science, engineering and technology

related to the understanding and control of matter at the length scale

of approximately 1 to 100 nanometers”.

NANOTECHNOLOGY allows control of physical properties of nanostructures and

devices with single molecule precision.

5

FEATURES

SensingHaptic

Surface

Self-

cleaning

Advanced

Power

Sources

Stretchable

Electronics

Transparent

Electronics

Wearable

Device

o Observe our local environment that includes analyzing pollutions, temperature etc.

o “Nanosensors” construct a complete awareness of the user context – both personal

and environmental enabling an appropriate and intelligent response.

o In order to improve sensor and signal processing characteristics Nokia introduced

NanoWire Lithography (NWL) process that fabricates a large area and self aligned

3D architectures.

o

SENSING

HAPTIC SURFACE 7

o Touch sensitive and responsive [haptic] surface of NOKIA morph is

provided by large area sensing surfaces using piezoelectric nanowire arrays.

o “ZnO” nanowires are used to produce the piezoelectric nanowire arrays.

oButtons on the device surface are real 3D forms

SELF CLEANING8

oThe surface of morph is superhydrophobic that makes it extremely dirt

repellent.

oNanostructured surface known as nanoflowers that naturally repel

water, dirt and even finger-prints is used here.

oDouble roughening of a hydrophobic surface, on the submicron and

nanometer scale, creates superhydrophobicity.

ADVANCED POWER SOURCES

o Polymer CNT composites with controlled conduction, nanotube

enhanced supercapacitors and nano composite solar cells etc acts

as the power sources.

o Energy harvesting from RF using wideband antennas and using

nano electro mechanical (NEM) method.

o “NANOGRASS” is used for harvesting solar power.

o Microwatt level energy harvesting from waste energy in

the air.

o NOKIA developed a full solid state flexible DYE SENSITIZED

SOLAR CELL (DSSC) using ZnO Nanostructures which act

as photovoltaic for this purpose

9

TRANSPARENT ELECTRONICS

o The whole electronic circuit inside NOKIA morph is entirely

transparent.

o Nanoscale electronics becomes invisible to the human eye.

.

10

TRRAM 11

o TRRAM developed by KAIST is the major platform for the transparent

electronics concept of morph.

o By integrating TRRAM device with other transparent electronic components a total see through embedded electronic system could

be developed.

o TRRAM records data by changing the resistance of a metal oxide

film known as Resistive RAM

WEARABLE DEVICE. 12

Can be used as a wrist watch or band.

ADVANTAGES vs DISADVANTAGES 13

o User friendly

o Can be personalized as we need

o Wearable device

o High cost

o Manufacturing is difficult

CONCLUSION. 14

o According to the developers, using nanotechnology can lead to

low cost manufacturing solutions as well as adjustable, empowering

devices, bringing us new, versatile possibilities.

o These mobile devices will be flexible, stretchable and shape

changing, so that they can be easily integrated in our everyday

routines without special adjustments on our part

THANK YOU

20

Submitted to

Mr. Narendra Kumar,

Lecturer at

MAIET

Submitted by

Mr. Sumit Dayama

C(sec), Branch(CSE)

Roll-11EMTCS753