This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Mou
ntin
g O
ptio
ns
Available in Flexible Mounting Optionsto Fit Your Application Requirements
At-a-GlanceNODE A Digital Repeater Mounting Options
Wall MOuntIng OPtIOns
Indoor Wall Mounting Kit
The indoor wall mounting kit comes with an adjustable frame that can support either the Node A2 or Node A4 chassis.
Node A2 Indoor Wall Mounting Kit PN 7597821
Node A4 Indoor Wall Mounting Kit PN 7597821
You Get:
Mounting Frame, Hardware and Components
Common PN 7597821 for both the A2 and A4
2x mounting bracket PN 7596837-00
1x connecting plate PN 7596863-00
4x nut 7557590
At-a-GlanceNODE A Digital Repeater Mounting Options
Outdoor Wall Mounting Kit
The Node A Outdoor Wall Mounting kit consists of the adjustable, mounting frame and hardware and components from the indoor mounting kit, plus a fan cover and unit drawer that gives the repeater an IP65 rating necessary for outdoor usage.
You Get:
+
Node A2 Outdoor Wall Mount Kit PN 7597819
Node A4 Outdoor Wall Mount Kit PN 7597820
Mounting Frame, Hardware and Components
Covers and Unit Drawer for A2 or A4
Common PN 7597821 for both the A2 and A4
2x mounting bracket PN 7596837-00
1x connecting plate PN 7596863-00
4x nut 7557590
Cover for IP65 Rating PN 7596864-00 (A2)PN 7596865-00 (A4)
Unit Drawer for IP65 RatingPN 7596861-00 (A2)PN 7596862-00 (A4)
Cables Kit PN 7597819M
2x cable PN 7617307-00
8x screw PN 7071944
NODE A Digital Repeater Mounting Options
POle MOuntIng OPtIOn
The outdoor pole mounting kit consists of all the other packages detailed in previous pages and the additional, necessary hardware for mounting to a pole. The complete kit includes the frame, hardware and mounting components (from the indoor mounting kit); the adjustable unit covers and drawers (from the outdoor mounting kit for IP65 rating); plus additional material for pole mounting.
Adapter Sheet PlateIt is necessary to leave 1 HU below
either Node model for proper airflow.
It is necessary to leave 1 HU below either Node model for proper airflow.
Rails should be added for support. These rails are not included with the Node A and should be obtained from
the supplier of the 19” rack.
The Node A2 and Node A4 are designed to easily mount in a rack for your application.
The Node A2 has a smaller width than the A4 rack, so the Adapter Sheet Plate PN 7598847-00 is needed to extend its width to make it fit within a standard 19” rack. The Accessory kit PN 7574542 comes standard with all Node A chassis.