NN46200-706 01.01 FAULT Logs Reference

Nortel Ethernet Routing Switch 8300

Logs ReferenceRelease: 4.1Document Revision: 01.01

www.nortel.com

NN46200-706 324408-A Rev 01.

Nortel Ethernet Routing Switch 8300Release: 4.1Publication: NN46200-706Document status: StandardDocument release date: 16 June 2008

Copyright © 2008, Nortel NetworksAll Rights Reserved.

Printed in Canada and the United States of America

LEGAL NOTICE

While the information in this document is believed to be accurate and reliable, except as otherwise expresslyagreed to in writing, NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OFANY KIND, EITHER EXPRESSED OR IMPLIED. The information and/or products described in this document aresubject to change without notice.

Nortel, the Nortel logo, the Globemark, and Passport are trademarks of Nortel Networks.

All other trademarks are the property of their respective owners.

ATTENTION

For information about the software license, read "Software license" in this guide.

.

3.

ContentsSoftware license 5

New in this release 9Features 9Other changes 9

New system messages 9

Introduction 11

SMP error messages 13Numeric Messages 13A Messages 13B Messages 25C Messages 35D Messages 54E Messages 57F Messages 61G Messages 68H Messages 75I Messages 79K Messages 91L Messages 91M Messages 97N Messages 104O Messages 117P Messages 127Q Messages 149R Messages 152S Messages 197T Messages 216U Messages 224V Messages 229W Messages 235

Nortel Ethernet Routing Switch 8300Logs Reference

NN46200-706 01.01 Standard16 June 2008

Copyright © 2008, Nortel Networks

.

4


NN46200-706 01.01 Standard16 June 2008


.

5.

Software licenseThis section contains the Nortel Networks software license.

Nortel Networks Inc. software license agreementThis Software License Agreement ("License Agreement") is betweenyou, the end-user ("Customer") and Nortel Networks Corporation andits subsidiaries and affiliates ("Nortel Networks"). PLEASE READ THEFOLLOWING CAREFULLY. YOU MUST ACCEPT THESE LICENSETERMS IN ORDER TO DOWNLOAD AND/OR USE THE SOFTWARE.USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OFTHIS LICENSE AGREEMENT. If you do not accept these terms andconditions, return the Software, unused and in the original shippingcontainer, within 30 days of purchase to obtain a credit for the fullpurchase price.

"Software" is owned or licensed by Nortel Networks, its parent or one ofits subsidiaries or affiliates, and is copyrighted and licensed, not sold.Software consists of machine-readable instructions, its components, data,audio-visual content (such as images, text, recordings or pictures) andrelated licensed materials including all whole or partial copies. NortelNetworks grants you a license to use the Software only in the countrywhere you acquired the Software. You obtain no rights other than thosegranted to you under this License Agreement. You are responsible for theselection of the Software and for the installation of, use of, and resultsobtained from the Software.

1. Licensed Use of Software. Nortel Networks grants Customer anonexclusive license to use a copy of the Software on only one machineat any one time or to the extent of the activation or authorized usage level,whichever is applicable. To the extent Software is furnished for use withdesignated hardware or Customer furnished equipment ("CFE"), Customeris granted a nonexclusive license to use Software only on such hardwareor CFE, as applicable. Software contains trade secrets and Customeragrees to treat Software as confidential information using the same careand discretion Customer uses with its own similar information that it doesnot wish to disclose, publish or disseminate. Customer will ensure thatanyone who uses the Software does so only in compliance with the terms


NN46200-706 01.01 Standard16 June 2008


.

6 Software license

of this Agreement. Customer shall not a) use, copy, modify, transferor distribute the Software except as expressly authorized; b) reverseassemble, reverse compile, reverse engineer or otherwise translate theSoftware; c) create derivative works or modifications unless expresslyauthorized; or d) sublicense, rent or lease the Software. Licensors ofintellectual property to Nortel Networks are beneficiaries of this provision.Upon termination or breach of the license by Customer or in the eventdesignated hardware or CFE is no longer in use, Customer will promptlyreturn the Software to Nortel Networks or certify its destruction. NortelNetworks may audit by remote polling or other reasonable means todetermine Customer’s Software activation or usage levels. If suppliers ofthird party software included in Software require Nortel Networks to includeadditional or different terms, Customer agrees to abide by such termsprovided by Nortel Networks with respect to such third party software.

2. Warranty. Except as may be otherwise expressly agreed to inwriting between Nortel Networks and Customer, Software is provided"AS IS" without any warranties (conditions) of any kind. NORTELNETWORKS DISCLAIMS ALL WARRANTIES (CONDITIONS) FOR THESOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOTLIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY OFNON-INFRINGEMENT. Nortel Networks is not obligated to provide supportof any kind for the Software. Some jurisdictions do not allow exclusionof implied warranties, and, in such event, the above exclusions may notapply.

3. Limitation of Remedies. IN NO EVENT SHALL NORTELNETWORKS OR ITS AGENTS OR SUPPLIERS BE LIABLE FOR ANYOF THE FOLLOWING: a) DAMAGES BASED ON ANY THIRD PARTYCLAIM; b) LOSS OF, OR DAMAGE TO, CUSTOMER’S RECORDS,FILES OR DATA; OR c) DIRECT, INDIRECT, SPECIAL, INCIDENTAL,PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING LOSTPROFITS OR SAVINGS), WHETHER IN CONTRACT, TORT OROTHERWISE (INCLUDING NEGLIGENCE) ARISING OUT OFYOUR USE OF THE SOFTWARE, EVEN IF NORTEL NETWORKS,ITS AGENTS OR SUPPLIERS HAVE BEEN ADVISED OF THEIRPOSSIBILITY. The forgoing limitations of remedies also apply to anydeveloper and/or supplier of the Software. Such developer and/or supplieris an intended beneficiary of this Section. Some jurisdictions do not allowthese limitations or exclusions and, in such event, they may not apply.

4. General

1. If Customer is the United States Government, the following paragraphshall apply: All Nortel Networks Software available under this LicenseAgreement is commercial computer software and commercial computer


NN46200-706 01.01 Standard16 June 2008


.

Nortel Networks Inc. software license agreement 7

software documentation and, in the event Software is licensed foror on behalf of the United States Government, the respective rightsto the software and software documentation are governed by NortelNetworks standard commercial license in accordance with U.S. FederalRegulations at 48 C.F.R. Sections 12.212 (for non-DoD entities) and48 C.F.R. 227.7202 (for DoD entities).

2. Customer may terminate the license at any time. Nortel Networksmay terminate the license if Customer fails to comply with the termsand conditions of this license. In either event, upon termination,Customer must either return the Software to Nortel Networks or certifyits destruction.

3. Customer is responsible for payment of any taxes, including personalproperty taxes, resulting from Customer’s use of the Software.Customer agrees to comply with all applicable laws including allapplicable export and import laws and regulations.

4. Neither party may bring an action, regardless of form, more than twoyears after the cause of the action arose.

5. The terms and conditions of this License Agreement form the completeand exclusive agreement between Customer and Nortel Networks.

6. This License Agreement is governed by the laws of the country inwhich Customer acquires the Software. If the Software is acquired inthe United States, then this License Agreement is governed by thelaws of the state of New York.


NN46200-706 01.01 Standard16 June 2008


.

8 Software license


NN46200-706 01.01 Standard16 June 2008


.

9.

New in this releaseThe following sections detail what is new in Nortel Ethernet Routing Switch8300 Logs Reference (NN46200-701) for release 4.1.

• “Features” (page 9)

• “Other changes” (page 9)

FeaturesThere are no new features in the document for this release.

Other changesFor information about changes that are not feature-related, see thefollowing sections:

• “New system messages” (page 9)

New system messagesSystem messages added in Release 4.1 are listed in the document.


NN46200-706 01.01 Standard16 June 2008


.

10 New in this release


NN46200-706 01.01 Standard16 June 2008


.

11.

IntroductionThis guide is a reference for the log messages generated by the EthernetRouting Switch 8300 System Messaging Platform (SMP).


NN46200-706 01.01 Standard16 June 2008


.

12 Introduction


NN46200-706 01.01 Standard16 June 2008


.

13.

SMP error messagesThis chapter lists SMP error messages in alphabetical order. Eachmessage has a severity level, description, synopsis, and a recommendedaction.

Numeric MessagesMessage <value> card in slot <value> not communicating

Severity WARNING

Description This message specifies that a card failed because it has no communicationwith the master CPU.

Action Re-insert or replace the card.

Message <value> failed

Severity FATAL for CP Card, ERROR for IO Card

Description The string provides the message that results in failure during the chassisinitialization.

Action System initialization failed for some reason. Please reboot and try again. If theproblem persists, try it with a different set of cards.

Message <value> failed for <value>

Severity FATAL for CP Card, ERROR for IO Card

Description The string provides the message that results in failure during chassisinitialization for a particular device number.

Action System initialization failed for some reason. Please reboot and try again. If theproblem persists, try it with a different set of cards.

A MessagesMessage AAAG_init: failed to init user hash

Severity ERROR

Description Cannot allocate memory for TACACS+ client operation


NN46200-706 01.01 Standard16 June 2008


.

14 SMP error messages

Action N/A

Message AAAG_init: failed to spawn tTacacsTask

Severity ERROR

Description Cannot launch TACACS+ client task.

Action N/A

Message AAAP_inner_authenticate_user: expected state for TACACS must not be’aborted’

Severity ERROR

Description Software state machine error.

Action N/A

Message AAAP_inner_authenticate_user: tried to begin without aborting or completingprevious authentication

Severity ERROR


Action N/A

Message AAAP_inner_authenticate_user: user status - aborted

Severity ERROR


Action N/A

Message AAAP_inner_authenticate_user: user status - result given

Severity ERROR


Action N/A

Message AAAP_inner_create_new_user: failed to add to hash

Severity ERROR

Description Memory problem

Action N/A

Message AAAP_inner_delete_user: failed to delete from hash

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

A Messages 15

Description Cannot free memory

Action N/A

Message AAAP_inner_delete_user: user entry does not exist

Severity ERROR

Description Attempted to delete nonexistent entry

Action N/A

Message AAAP_inner_delete_user: wrong user state (inBegin)

Severity ERROR


Action N/A

Message AAAP_inner_delete_user: wrong user status = xyz

Severity ERROR


Action N/A

Message AAAP_message_handler: unknown message

Severity ERROR


Action N/A

Message AAAP_tacacs_authentication_indication: no data received

Severity ERROR

Description Empty tacacs packet was received from server.

Action N/A

Message AAAP_tacacs_authentication_indication: unknown REPLY status = xyz

Severity ERROR

Description Unknown packet was received from specific server

Action N/A

Message AAAP_tacacs_authorization_indication: no data

Severity ERROR

Description Unsupported packet was received from specific server


NN46200-706 01.01 Standard16 June 2008


.


Action N/A

Message AAAP_tacacs_authorization_indication: unknown RESPONSE status = xyz

Severity ERROR


Action N/A

Message AAAP_tacacs_authorization_indication: wrong tacacs status

Severity ERROR


Action N/A

Message AAAP_tacacs_task_message_handler: failed to open pipe

Severity ERROR

Description Cannot open TACACS+ task message pipe. TACACS+ client application willnot be operable.

Action N/A

Message AAAP_tacacs_task_message_handler: failure on select xyz

Severity ERROR

Description TACACS+ task socket select operation failed

Action N/A

Message AAAP_tacacs_task_message_handler: invalid message type = xyz

Severity ERROR


Action N/A

Message AAAP_tacacs_task_message_handler: mutex id null

Severity ERROR

Description Error in communications with TACACS+ task

Action N/A

Message accept failed for sscp task

Severity Error

Description This message is generated when an SSCP socket open error has occurred.

Action Check the network connection.


NN46200-706 01.01 Standard16 June 2008


.

A Messages 17

Message accept failed for sscp task

Severity Fault

Description When you enable NSNA globally, the system initiates an SSCP task and usesa socket to connect the task to the NSNAS. This message indicates that thesystem failed to accept the socket.

Action Confirm that a socket is available or verify the NSNAS configuration.

Message AceEntry Mode <value> is not recognizable

Severity ERROR

Description The ACE has modes for permit, deny, redirect, inactive. An unrecognizedmode is not expected from user. This could be the result of corruption ormissing/insufficient consistency check.

Action Try removing/enabling filters on the port. Try a delete/create for the ACG fromthe port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message Acg Reference Count is <value> cannot be decremented for Acl Id <value>

Severity ERROR

Description The filter module’s table management keeps dependency between the ACLand ACG in order to allow/prevent ACL modification or deletion.

Action Check the dump using aclDumpAclTbl(). Delete all the ACGs, ACLs, andrecreate them.

Message AcgId <value> PclId <value> cannot remove Pcl <value>

Severity ERROR

Description This message indicates that filter configuration in hardware could not becleared. Possible reasons for this are:A.) It is enabled on other portsB.) It does not exist in the hardware.

Action Try removing or enabling filters on the port.

Message AcgId <value> ProfileId <value> cannot remove profile <value>

Severity ERROR

Description This message indicates that the template configuration in hardware could notbe cleared, Possible reasons for this are:A.) The template does not exist in hardware.B.) Template is still needed in the hardware.


Message AcgId <value> ProfileId <value> cannot UnBind ifIndex <value> <value>


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message indicates that the template configuration in hardware could notbe cleared for this port.


Message Acl Reference Count is <value> cannot be decremented for Act Id <value>acl type <value>

Severity ERROR

Description Filter module’s table management keeps dependency between ACL and ACTto allow or prevent ACT modification or deletion.

Action Check the dump using aclDumpActTbl(). Delete all the ACLs, ACTs andrecreate them.

Message aclAceListAdd() malloc() SIZE <value> FAIL

Severity ERROR

Description This message indicates that the system is low on resources.

Action Reduce the running configuration or reboot.

Message aclAcgTblAdd() malloc() SIZE <value> FAIL

Severity ERROR

Description This message indicates the system is low on resources.


Message aclAclTblAdd() malloc() SIZE <value> FAIL

Severity ERROR



Message aclActTblAdd() malloc() SIZE <value> FAIL

Severity ERROR



Message aclHwBuildPceParamBlock(): AclEntry <value> AclType <value> does nothave field selection in Profile for pkt type <value>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

A Messages 19

Description The template associated with the ACL does not have the fields configured forrules in the ACL. A missing or incomplete consistency check or corruptioncould cause this.

Action Try removing or enabling filters on the port. Try to delete or create the ACGfrom the port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message aclHwBuildPceParamBlock(): AclEntry’s AclType is NOT SUPPORTED

Severity WARNING

Description Two possible ACL types are IP, Non-IP. Any other value for type field indicatesa corruption or incorrect information in the instrumentation table.

Action Try removing or enabling filters on the port. Try to delete or create the ACGfrom the port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message aclHwBuildPceParamBlock(): AclId <value> ProfileId <value> NOT FOUND<value>

Severity ERROR

Description The template is expected in the hardware, but is not found.

Action Try removing or enabling filters on the port. Try to delete or create for the ACGfrom the port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message aclHwBuildPceParamBlock(): Pcl size <value> exceeding Max Pcl size<value> for AclId <value>

Severity ERROR

Description Specified ACG required more than 128 filters in the hardware. This couldresult from an attempt to use rules with conditional matching such as greater,less, range, not-equal.

Action Try to minimize the operators. If that does not help, remove some ACEs fromthe ACLs.

Message aclHwBuildPceParamBlock(): Profile is corrupted # of Match fields exceedinglimit per Pce <value>

Severity WARNING

Description The hardware cannot support more than 16 bytes for each ACL type. Amissing or incomplete consistency check or corruption can cause this.

Action Try removing or enabling filters on the port. Try to delete or create the Acgfrom the port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message aclHwBuildPceParamBlock(): ProfileEntry’s MatchInfo has unsupported field<value> at index <value>

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.


Description A rule in the ACL has a match field that could not be handled correctly.

Action Try removing or enabling filters on the port. Try to delete or the ACG from theport. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message aclHwBuildProfileParamBlock(): ActEntry’s AclType <value> is NOTSUPPORTED

Severity WARNING

Description Two possible ACL types are IP, Non-IP. Any other value for the type fieldindicates a corruption or incorrect information in the instrumentation table.

Action Try removing or enabling filters on the port. Try a delete or create for theACT. If the ACT entry cannot be deleted, try a reboot. Check dump usingaclDumpActTbl().

Message aclHwBuildProfileParamBlock(): ActEntry’s MatchInfo has unsupported field<value> at index <value>

Severity WARNING

Description This message indicates the ACT entry has a field selection that could not behandled correctly.

Action Try removing or enabling filters on the port. Try a delete or create for theACT. If ACT entry cannot be deleted, try a reboot. Check dump usingaclDumpActTbl().

Message aclHwBuildProfileParamBlock(): ActEntry’s size <value> is corrupted/invalid

Severity WARNING

Description The size of the ACT entry is determined by the number of fields selected foreach ACL-type.

Action Try removing or enabling filters on the port. Try a delete or create for theACT. If the ACT entry cannot be deleted, try a reboot. Check dump usingaclDumpActTbl().

Message aclHwCreateAction: Bridged/routed is NOT specified with remarking DSCPand 802.1p

Severity INFO

Description Remarking DSCP and 802.1p is supported for only one of the routed/bridgedtraffic types in one rule. Thus, you must be sure to specify the routed/bridgedtraffic-type in the rule.

Action Try removing or enabling filters on the port. Try a delete or create for the ACGfrom the port. Check remarking configuration. Dump using aclDumpAclTbl()or aclDumpAceList().

Message aclHwCreateAction: Policy Id <value> doesn’t exist


NN46200-706 01.01 Standard16 June 2008


.

A Messages 21

Severity ERROR

Description The policy entry for policing is managed in the QoS configuration. The policyentry specified in the ACE is not found in the QoS tables.

Action Ensure that the policy exists with the specified policy ID. Try removingor enabling filters on the port. Try to delete or create for the ACG fromthe port. Check policy ID in the filter. Dump using aclDumpAclTbl() oraclDumpAceList().

Message aclHwCreateAction: unexpected DP value <value>

Severity ERROR

Description The QoS map table lookup returned an invalid Drop precedence value.

Action Ensure QoS map tables are correct. Try removing or enabling filters on theport. Try a delete or create for the ACG from the port. Check remarkingconfiguration. Dump using aclDumpAclTbl() or aclDumpAceList().

Message aclHwInit(): Create Action FAIL with gt status <value>

Severity ERROR

Description During filter initialization some hardware resources are required. A defaultaction is required to create a template. This default action is applicable for thetypes of traffic which do not have any filters configured.

Action Try a reboot.

Message aclHwModifyActionStats(): tapiBindTcToAction() failed AceId <value> ActionId<value>

Severity WARNING

Description Statistics/counters resources could not be released from the filter.

Action Try to enable or disable statistics on the filter.

Message aclHwModifyActionStats(): Tc Id <value> tapiUnBindTcToAction() FAIL

Severity WARNING

Description The statistics/counters resources could not be released from the filter.

Action Try to enable or disable statistics on the filter.

Message aclIfIndexTblAdd() malloc() SIZE <value> FAIL

Severity ERROR




NN46200-706 01.01 Standard16 June 2008


.


Message aclNhopTblAdd() malloc() SIZE <value> FAIL

Severity ERROR



Message ActProfileIdMap unexpected NumIf count for ActId <value> ProfileId <value>

Severity WARNING

Description The map table for the template in the application and hardware is incorrect.

Action Try a reboot.

Message Add ARP <IP Address/MAC Address> for RSMLT PEER. IP RSMLT is notworking properly.

Severity Warning

Description This message indicates an error when you attempt to modify ARP records usedby RSMLT. This error may impact RSMLT backup functionality.

Action Contact customer service and have the following information available: systemlogs including any memory dumps, switch configuration, and network topologyfor further analysis.

Message addMrdiscNeighbor: cant allocate memory

Severity ERROR

Description MRDisc is not supported in the Passport 8300, so this error should not occur.

Action N/A

Message Add Smlt Id Failed as Vlan <Vlan ID> not found

Severity Error

Description This message indicates that a valid VLAN is not found when RSMLT attempts toupdate the SMLT and SLT IDs in a Vlan.

Action Record the error message and configuration, and reboot the chassis. Contactcustomer service and have the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message Add IP RSMLT temporary default route failed for vrf <Vrf ID> when IST up

Severity Error

Description This message is generated when RSMLT does not add a temporary default routefor a VRF instance.


NN46200-706 01.01 Standard16 June 2008


.

A Messages 23

Action You can continue to operate the chassis, but contact customer service with thefollowing information available: system logs including any memory dumps, switchconfiguration, and network topology for further analysis.

Message add_virtual_nbr : Malloc Failed.

Severity Error

Description A malloc failure occurs when a virtual Nbr is added.

Action Reduce the running configuration file size or reboot the switch.

Message Adding port <> to vlan <> failed

Severity Fault

Description This message is generated when the system cannot change the VLANmembership of the specified NSNA port.

Action Disable and enable the NSNA port.

Message AllocateCLIContext malloc failed

Severity ERROR

Description This message indicates the system is unable to allocate memory for the NNCLIcontext.

Action N/A

Message Allow Mac Address table full. Can’t add more!

Severity ERROR

Description This message is generated when the learned MAC entries have exceeded theMax MAC allowed count of 2048.

Action N/A

Message Allow Mac Address table is full. Can’t learn Mac <value>!

Severity ERROR

Description This message is generated when the learned MAC entries have exceeded theMax MAC allowed count of 2048.

Action N/A

Message alwMacAddrAgeoutAutolearn: can’t take semaphore!

Severity ERROR

Description This message is generated when the system cannot obtain the allowMacsemaphore.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message alwMacTblCheckAndLearn: can’t take semaphore!

Severity ERROR

Description This message is generated when the system cannot obtain the allowMacsemaphore.

Action N/A

Message APP_LOCK failed

Severity ERROR

Description This message indicates that the system cannot get the allowed MACsemaphore.

Action N/A

Message arpadd: move unresolved entry, but usrdata is NULL

Severity ERROR

Description This message is generated when resolving an ARP if the system finds acorresponding unresolved ARP entry. The unresolved ARP entry is thenchanged to resolved. To update this entry in hardware, the system uses theusrdata to find the hardware information.

Action Contact the customer support team if the problem persists.

Message ArpReqGen: arpaddUnres failed for <ip>

Severity ERROR

Description This message is generated when the system cannot add to the software ARPunresolved table.

Action N/A

Message ArpRspProc: Out of memory!

Severity ERROR

Description This message is generated when the system could not allocate memory for atemporary ARP entry to be added in the ARP table.


Message ArpTic: failed to get arp activity from hardware. Going to refresh the arpanyway

Severity ERROR

Description This message is generated when failing to get the activity status fromhardware for this ARP entry results in ARP aging not taking place. The ARPentry is refreshed.


NN46200-706 01.01 Standard16 June 2008


.

B Messages 25

Action N/A

Message Authentication failed for mac <mac addr> on port <> vlan <>

Severity Information

Description This message indicates that MAC authentication failed for the specified MACaddress.

Action Accept the portal authentication or confirm NSNAS configuration.

Message autoSavePcapData: Memory not available to save all packets. Saving only<number-of-packets-saved> of <total-number-of-packets> packets

Severity INFO

Description This message is generated when PCAP tries to do an autosave and finds thatnot enough memory is in the PCMCIA to store all packets.

Action Free up some memory in the PCMCIA.

Message avpair_get Unknown attribute x

Severity ERROR

Description This message indicates that a RADIUS attribute unknown to the Passport8300 is being looked-up.

Action Verify that the sent and received RADIUS packets contain known attributes.

B MessagesMessage bind failed

Severity ERROR

Description This message specifies that a socket cannot be bound for the bootp daemon.

Action Reboot the switch and contact the customer support team if the problempersists.

Message Bind failed for SSCP socket

Severity Error

Description This message is generated when an attempt to bind the SSCP socket hasfailed.


Message Bind failed for SSCP socket

Severity Fault


NN46200-706 01.01 Standard16 June 2008


.


Description This message indicates that the system cannot bind the SSCP socket to theloopback IP address.

Action Verify the operation of the loopback address, disable and enable NSNAglobally, or confirm NSANS configuration.

Message Bkend state of Port -- - Recd accept from server

Severity INFO

Description This messages indicates that an 802.1X Backend Authentication StateMachine received an Access-Accept message from the RADIUS server.

Action No action is necessary.

Message Bkend state of Port -- - Recd accept from server

Severity INFO

Description This message is generated when 8021x Backend Authentication StateMachine receives a Access-Accept message from RADIUS server.

Action No action necessary

Message Bkend state of Port -- - Recd EAP request from Server

Severity INFO

Description This message is generated when 8021x Backend Authentication StateMachine receives EAP request from RADIUS server.


Message Bkend state of Port -- - Recd Reject from server

Severity INFO

Description This message indicates that an 802.1X Backend Authentication State Machinereceived an Access-Reject message from the RADIUS server.


Message Bkend state of Port -- - Recd Reject from server

Severity INFO

Description This message is generated when 8021x Backend Authentication StateMachine receives a Access-Reject message from RADIUS server.


Message Bkend state of Port -- - Recd Response from supplicant

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.

B Messages 27

Description This message indicates that an 802.1X Backend Authentication State Machinereceived a response from a supplicant.


Message Bkend state of Port -- - Recd Respose from supplicant

Severity INFO

Description This message is generated when 8021x Backend Authentication StateMachine receives a response from supplicant.


Message Bkend state of Port -- Recd EAP request from Server

Severity INFO

Description This message indicates that an 802.1X Backend Authentication State Machinereceived an EAP request from the RADIUS server.


Message blocked DHCP packet for possible DOS attack on port <x/y> from<mac_address>

Severity Warning

Description This message indicates that the source MAC address in an Ethernet headerdiffers from the client hardware address in the DHCP packet or for DHCPrelease/decline packets, clients do not exist in NSNA client info.

Action Check for a virus on the specified port or for an attack on the system by anillegal user.

Message Blocked unauthorized nncli access

Severity WARNING

Description This message indicates that unauthorized NNCLI access has been blocked.

Action N/A

Message Blocked unauthorized nncli enable access

Severity INFO

Description This message indicates that unauthorized NNCLI enable access has beenblocked

Action N/A

Message bootpdGo: Can’t create Bootp Server task!

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.


Description This message indicates a Bootp Server task cannot be created.


Message bootpSyncCallback: Invalid msgType <type>

Severity ERROR

Description This message specifies that an invalid argument exists for the bootp modulesync callback function.

Action N/A

Message bootpSyncCallback: unsupported version <ver>

Severity ERROR

Description There is a synchronization issue between two CPUs, perhaps a bootp moduleversion mismatch

Action N/A

Message bootpSyncNotify: malloc failed

Severity FATAL

Description This message indicates the system has run out of memory


Message brdgSetSmltBridgeId: can’t take semaphore!

Severity ERROR

Description This message is generated when a semaphore cannot be taken while settingthe smlt bridge ID.

Action N/A

Message brdgStart: Can’t create mutex semaphore!

Severity Fault

Description This message is generated when there is insufficient system memory or aconflict in data access.

Action Use the show sys per command to check system memory resourceutilization. Reboot the switch and contact customer service with thefollowing information available: trace level 5 4, any memory dumps, switchconfiguration, and network topology for further analysis.

Message brdgStart: StgPortTable exists!


NN46200-706 01.01 Standard16 June 2008


.

B Messages 29

Severity Fault

Description This message indicates that data variations exist before the switch createsan STG port table.

Action Reboot the switch and contact customer service with the following informationavailable: trace level 5 4, any memory dumps, switch configuration, andnetwork topology for further analysis.

Message brdgStart: StgPortTable calloc Failed!

Severity Fault

Description This message indicates that there is insufficient memory available for thesystem to allocate memory for data variation.


Message brdgLoad: can’t setup default configuration!

Severity Fault

Description This message indicates that the system failed to run the default bridgeconfiguration.

Action Verify the default STG configuration.

Message brdgProcessBpdu: pStg is NULL stg X port A/B

Severity Fault

Description This message indicates that the bridge cannot retrieve STG information whenprocessing a BPDU.


Message brdgProcessBpdu: can’t take semaphore

Severity Fault

Description This message is generated when there is insufficient system memory or thereis a conflict in data access.


Message brdgReceiveBpdu: can’t take semaphore


NN46200-706 01.01 Standard16 June 2008


.


Severity Fault



Message brdgReceiveNonNtBpdu: can’t take semaphore

Severity Fault



Message brdgLoad: can’t lock mutex!!

Severity Error



Message brdgPortConfigurable: can’t take semaphore!

Severity Error



Message brdgPortConfigurable: Can’t add port to the Default STG!

Severity Error

Description This message indicates the system failed to add a port to the default STG.

Action Verify the STG configuration. Reboot the switch and contact customer servicewith the following information available: trace level 5 4, any memory dumps,switch configuration, and network topology for further analysis.


NN46200-706 01.01 Standard16 June 2008


.

B Messages 31

Message brdgPortNotConfigurable: can’t take semaphore!

Severity Error



Message brdgPortNotConfigurable: can’t remove port from STG!!

Severity Error

Description This message indicates that the system failed to remove a port from an STG.


Message brdgPortPresent: can’t take semaphore!

Severity Error



Message brdgLinkUp: can’t lock mutex!

Severity Error



Message brdgLinkDown: can’t lock mutex!

Severity Error



NN46200-706 01.01 Standard16 June 2008


.



Message brdgCreateSpanTreeGroup: Can’t create BPDU MAC Address record!

Severity Error

Description This message is generated when the system fails to create a BPDU MACaddress.


Message brdgCreateSpanTreeGroup: Can’t create IEEE VLAN ID record!

Severity Error

Description This message indicates that the system failed to create a IEEE VLAN ID foran STG.


Message brdgCreateSpanTreeGroup: Can’t create mutex semaphore!

Severity Error



Message brdgEnableTrunk: can’t lock mutex!

Severity Error



Message brdgEnableUni: can’t lock mutex!


NN46200-706 01.01 Standard16 June 2008


.

B Messages 33

Severity Error



Message brdgTick: can’t lock mutex

Severity Error



Message brdgGetStpPortStats: can’t take semaphore!

Severity Error



Message brdgClearStats: can’t take semaphore!

Severity Error



Message brdgLock: task=%s can’t lock mutex!

Severity Error



NN46200-706 01.01 Standard16 June 2008


.



Message brdgUnlock: task=%s can’t unlock mutex!

Severity Error



Message brdgDisablePortinAllStg: can’t lock mutex!

Severity Error



Message brdgSetMltStp: can’t lock mutex!

Severity Error



Message brdgSetPortStpOff : can’t lock mutex!

Severity Error




NN46200-706 01.01 Standard16 June 2008


.

C Messages 35

Message brdgSetPortStpOnOff : can’t lock mutex!

Severity Error



C MessagesMessage Cannot add an ARP entry to a non-existing port

Severity INFO

Description This message is generated when a port is not found to add an entry to theARP table.

Action Check the configuration for the port.

Message Cannot add MAC range filter for EAP!

Severity ERROR

Description This message indicates the MAC filter for capturing EAP packets to the CPU isnot created.

Action N/A

Message can not add multicast route for group <group address>, errorno=<value>.

Severity Fault

Description When you create a multicast group for MVR, the system creates a hardwaremulticast route. This message is generated when the system cannot createthe hardware multicast route

Action Disable and enable MVR. If the error does not clear, restart the switch.

Message Cannot add MAC range filter for LLDP!

Severity ERROR

Description This message is generated when the Std MAC address, 01:80:c2:00:00:0e,caould not be added to the MAC range filter during LLDP initialization.

Action Reboot required.

Message cannot allocate announce gt nexthop tbl link list object

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when the system cannot allocate memory for thelist used by the software next-hop table.

Action Contact the customer service team if the problem persists.

Message Cannot allocate announce gt nexthop tbl link list object

Severity ERROR

Description This message indicates that memory cannot be allocated for the list used bythe software next-hop table.


Message Cannot allocate filter index object

Severity ERROR

Description This is a fatal error message indicating the switch is unable to allocate theaccess filter list element due to the lack of available memory.

Action N/A

Message cannot allocate filter link list

Severity ERROR

Description This message indicates that a fatal error occurred during the allocation of thefilter index due to the lack of available memory.

Action N/A

Message cannot allocate group index object

Severity FATAL

Description This message is generated while initializing the IGMP group list if the DRAMmemory is exhausted.

Action Increase DRAM memory size.

Message cannot allocate group link list object

Severity FATAL

Description This message is generated while initializing the IGMP group list and the DRAMmemory is exhausted.


Message cannot allocate id stack object for Udp PortFwd tbl

Severity FATAL

Description This message is generated when allocation and initialization of the stack with agiven stack size fails.


NN46200-706 01.01 Standard16 June 2008


.

C Messages 37

Action Close all CLI sessions to free up memory.

Message cannot allocate igmp interface index object

Severity Fatal

Description A failure has occurred in allocating memory for igmp interface index object.


Message cannot allocate PIM interface index object

Severity Fatal

Description A malloc memory failure for the PIM interface index has occurred.


Message cannot allocate PIM link list object

Severity Fatal

Description A malloc memory failure for the PIM link list has occurred.


Message cannot allocate rps node

Severity Fatal

Description This message indicates that there is insufficient system memory for the RPSmodule to initiate VRFs.

Action Wait for system memory to become available or reboot the chassis.

Message cannot allocate policy prefix object/

Severity Fatal

Description This message indicates that there is insufficient memory available for the systemto allocate a policy prefix list.


Message cannot allocate policy prefix avl head object

Severity Fatal

Description This message indicates that there is insufficient memory available for the systemto allocate a policy prefix list.


Message cannot allocate memory for packet, length=<value>.

Severity Fault

Description This message is generated when the system cannot allocate enough memory foran IGMP packet.


NN46200-706 01.01 Standard16 June 2008


.


Action Check for a possible memory leak or restart the switch.

Message Cannot Allocate Memory for SNMP EngineId String

Severity ERROR

Description This message is generated when the system is out of memory while executingthe software.

Action Report the problem

Message Cannot Allocate Memory for SNMP Engineld String

Severity ERROR

Description This message indicates that the system ran out of memory while executing thesoftware.

Action Report the problem.

Message cannot allocate memory for tIGMP_QUERIER

Severity FATAL

Description This message indicates there is a memory allocation failure.

Action N/A

Message cannot allocate memory for tMVRENTRY

Severity Fault

Description This message indicates that there is insufficient system memory for the system tooperate.

Action Check for a memory leak or reboot the switch.

Message cannot allocate memory for tMVRMEMBER

Severity Fault



Message cannot allocate memory for tMVRVLAN

Severity Fault




NN46200-706 01.01 Standard16 June 2008


.

C Messages 39

Message cannot allocate OSPF access head

Severity FATAL

Description This message is generated when the system runs out of DRAM memory.

Action Close all CLI sessions to free memory.

Message cannot allocate OSPF access head avl head object

Severity FATAL


Action Close all CLI sessions to free memory.

Message cannot allocate rcip_route_index object

Severity FATAL

Description This message is generated when the system is unable to allocate memory forthe RCIP object.

Action Increase DRAM size and contact customer support for further troubleshooting.

Message Cannot bind BpduVlanId <value> to stg <value>, err=<value>

Severity ERROR

Description The binding of the Spanning Tree Group (STG) to the BPDU VLAN failed inhardware during STG creation.

Action Reboot the switch and contact the customer support team if the problem persists.

Message Cannot bind Vlan <value> to stg <value>, err=<value>

Severity ERROR

Description The binding of the STG to the BPDU VLAN failed in hardware during STGcreation.


Message Cannot config card due to condition specified

Severity INFO

Description This message is generated when a card cannot be configured because of thespecified conditions.

Action N/A

Message Cannot configure card. Please remove and insert again

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated to specify that card should be removed and thenre-inserted.

Action Contact Customer Support for further troubleshooting.

Message Cannot create logSendFatalLogTask task

Severity FATAL

Description The logSendFatalLogTask task cannot be created.


Message Cannot create message queue for radius snmp accounting Radius Snmpacoounting not enabled

Severity ERROR

Description This message indicates the software resource for handling accountingmessages cannot be acquired.

Action Contact customer support.

Message can not create linkLayer interface for vid <value> vidx <value>, group=<groupaddress>, errorno=<value>”

Severity Fault

Description When you create an IGMP snoop group in MVR, the system creates ahardware link layer interface. This message is generated when the systemcannot create the hardware link layer interface.


Message can not create MLL for vid <value> vidx <value>, group=<group address>,errorno=<value>d”

Severity Fault

Description When you create an IGMP snoop group in MVR, the system creates ahardware record. This message is generated when the system cannot createthe hardware record.


Message Cannot create TACACS+ client, maximum users reached

Severity ERROR


Action N/A


NN46200-706 01.01 Standard16 June 2008


.

C Messages 41

Message Cannot delete ARP entry < IP Address/MAC Address> of IP RSMLT Peerwhen forwarding for peer stop

Severity Warning

Description This message indicates that ARP entries used by an IP RSMLT peer are notdeleted when RSMLT discontinues backup forwarding for that peer.


Message Cannot delete ARP entry <IP Address/MAC Address> of IP RSMLT Peerwhen holdup forward to forward

Severity Warning

Description This message indicates that an error occurred when you attempted to clear anARP record used by RSMLT.

Action Delete the ARP entry added by RSMLT from the ARP table and contactcustomer service with the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message can not delete multicast route for group <group address>, errorno=<value>.

Severity Fault

Description When you remove a multicast group from MVR, the system removes ahardware record. This message is generated when the system cannot removethe hardware record.


Message can not delete MLL for vid <value> vidx <value> group=<group address>,errorno=<value>

Severity Fault

Description When you remove an IGMP snoop group from MVR, the system removes ahardware record. This message is generated when the system cannot removethe hardware record.


Message can not delete linkLayer interface for vid <value> vidx <value>, group=<groupaddress>, if_index=<value>, errorno=<value>

Severity Fault

Description When you remove an IGMP snoop group from MVR, the system removes ahardware record. This message is generated when the system cannot removethe hardware record.


NN46200-706 01.01 Standard16 June 2008


.



Message Cannot set max ecmp paths number without enabling ECMP feature first!

Severity ERROR

Description This message indicates that you did not enable ECMP to change themaximum ECMP path number.

Action You must enable ECMP prior to changing the maximum ECMP path number.

Message Cannot turn on IP routing on MAC addr = < MAC Address> of IP RSMLT Peerwhen forwarding for peer.

Severity Warning

Description This message is generated when a Mac Address cannot be set as routablewhen RSMLT is backing up for the IST peer.

Action Check the forwarding database table to verify MAC addresses aresynchronized successfully between IST peers.If the Mac addresses are synchronized successfully, disable and enableRSMLT on the IST peer. Contact customer service and have the followinginformation available: system logs including any memory dumps, switchconfiguration, and network topology for further analysis.

Message Cannot turn off IP routing on MAC addr = <MAC Address> of IP RSMLT Peerwhen forwarding for peer

Severity Warning

Description This message is generated when IP routing is not disabled for an IP RSMLTpeer Mac address when RSMLT is backing up for that peer.

Action You can continue to operate the chassis. Contact customer service and havethe following information available: system logs including any memory dumps,switch configuration, and network topology for further analysis.

Message Cannot turn off IP routing on MAC addr = <MAC Address> of IP RSMLT Peerwhen Stop Forwarding for Peer

Severity Warning

Description This message is generated when IP routing is not disabled for an IP RSMLTpeer Mac address when RSMLT discontinues backing up for that peer.

Action You can continue to operate the chassis. Contact customer service and havethe following information available: system logs including any memory dumps,switch configuration, and network topology for further analysis.

Message Cannot unbind BpduVlanId <value> from stg <value>, err=<value>!

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

C Messages 43

Description This message indicates the unbinding of the STG from the BPDU VLAN failedin hardware during STG deletion.


Message Cannot unbind vlanId <value> from stg <value>, err=<value>!

Severity ERROR

Description This message indicates the unbinding of STG from the BPDU VLAN failed inhardware during STG deletion.


Message cannot update nexthop tbl entry

Severity ERROR

Description This message is generated when the system is trying to update the softwarenext-hop entry, but finds the pointer to the next hop entry is NULL.


Message Cannot update nexthop tbl entry

Severity ERROR

Description When trying to update the software next-hop entry, it was discovered that thepointer to the next hop entry is NULL.


Message can’t unbind BpduVlanId %d from stg %d, err=%d!

Severity Error

Description This message is generated when the system fails to unbind a VLAN from anSTG.

Action Verify the STG configuration.

Message Card configured OffLine: Slot=<value> Type=<value

Severity FATAL

Description This message indicates the card was configured off-line.

Action N/A

Message Card Failed: Slot=<value> Type=<value>,

Severity ERROR

Description This message specifies the card failed.


NN46200-706 01.01 Standard16 June 2008


.



Message card_portInit: Out of memory: <value>

Severity FATAL

Description This message indicates memory cannot be allocated.


Message cfgXbarOnCpsfCard: cannot use cpu <value> card as relay card

Severity ERROR

Description This message indicates the CPU card cannot be used as a relay card.


Message cfgXbarOnCpsfCard: gtXbarSetUcRoute failed - <value>

Severity ERROR

Description This message indicatest the set XBAR unicast table failed.


Message Chassis type cannot be determined

Severity INFO

Description The chassis type cannot be determined because the value read from thebackplane SEEPROM is bad, or the Passport 8300 card is inserted in achassis that is not supported by this software.

Action Please verify that the chassis is either a Passport 8600 or 8300.

Message Chassis type unknown

Severity ERROR

Description The SEEPROM information about chassis type is wrong or unsupported

Action Contact the customer support team for assistance.

Message chCardIn: Can’t read SEEPROM on slot=<value>: <value> <value>

Severity INFO

Description This message indicates that the SEEPROM cannot be read for the card.


Message chCOPListenTimerSet: global set, still setting <value>

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.

C Messages 45

Description This message indicates the coprocessor listen timer is being set before itexpires. This should not happen in a normal scenario.

Action N/A

Message chGetFrontPortFromLport: Error to get front port

Severity WARNING

Description This message is generated when a software error occurs.


Message chProcHelloFromProc:NPAL_SetDevMac: failed for slot <value>

Severity ERROR

Description This message indicates a hardware write failed to set the device MAC.

Action Try re-inserting the card.

Message chRxHelloFromCOP: problem making port <value> present on slot <value>

Severity ERROR

Description This message indicates the port present failed for a certain port.

Action Try re-inserting the card. If the problem persists, contact the customer supportteam.

Message Closed rlogin connection from <ip-address> user <user-name>

Severity INFO

Description This message is generated when an rlogin connection to the switchterminates.

Action N/A

Message Closed telnet connection from <ip-address> user <user-name>

Severity INFO

Description This message is generated when a telnet connection to the switch terminates.

Action N/A

Message cl_ULink: unlinking x twice/

Severity Fault

Description This message indicates that when you added a static route, the internal routewas corrupted and the system operation is unstable.

Action Reboot the switch and contact customer service with the following informationavailable: system logs including any memory dumps, switch configuration, andnetwork topology for further analysis.


NN46200-706 01.01 Standard16 June 2008


.


Message cl_Link: linking x twice/

Severity Fault



Message cl_LinkGen: linking x twice

Severity Fault



Message Connection lost to slot <value> ...

Severity ERROR

Description IPC connection between the CP card and a given I/O slot is lost.


Message Connection not found for connection Id <value>

Severity ERROR

Description IPC connection between the CP card and I/O card cannot be found in softwaredatabase.

Action This is caused by the IPC connection setup, or a corruption of the softwaredata structures.

Message Connection rejected with NSNAS IP <IPAddr> status subCode <reason>

Severity Error

Description This message is generated when connection with NSNAS IP has beenrejected, with the status subCode <reason>:=[Version mismatch|NSNASsubnet mismatch|NSNAS invalid hello or inactivity interval| <protocol version>]

Action Check for version, NSNAS mismatches or invalid NSNAS hello, inactivityinterval.

Message Connection rejected with NSNAS IP <> status subCode <reject reason>


NN46200-706 01.01 Standard16 June 2008


.

C Messages 47

Severity Fault

Description This message is generated when the switch rejects an SSCP connection.

Action Refer to reject reason included in the message for the action required.

Message Consistency check failed for Bootp table syncing RED_BOOTP_INFO

Severity ERROR

Description This message indicates a consistency check for the bootp table failed.

Action N/A

Message Consistency check failed for table syncing tSmltInfoSyncEntry

Severity ERROR

Description This message is generated when the message length is not correct for SMLTsynchronization.

Action N/A

Message cosLibInit: failed

Severity ERROR

Description This message specifies the CoS library initialization failed.

Action Reboot the switch if you wish to use CoS functions.

Message Could not allocate context

Severity ERROR

Description This message indicates that context for the NNCLI could not be allocated.

Action Reboot the switch and contact customer support if the problem persists.

Message Could not allocate memory for bufLog!

Severity WARNING

Description This message indicates the Passport 8300 is unable to allocate memory.

Action N/A

Message Could not allocate memory for new next-hop entry

Severity ERROR

Description Memory cannot be allocated for the new software next-hop entry.


Message Could not create xlrclip for nncli


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message specifies the Passport 8300 is unable to create xlrclip for theNNCLI.


Message Could not delete software mirroring Entry <id>

Severity WARNING

Description This message specifies that a mirroring software table entry cannot be deletedbecause the table is empty or the ID cannot be found.

Action Verify correct command parameters in documentation and retry.

Message Could not delete the hw mirroring Entry <id>

Severity WARNING

Description This message specifies that a mirroring hardware table entry cannot bedeleted because of an incorrect ID or the lack of an OS resource.

Action Verify the correct command parameters in the documentation and try again.

Message Could not delete the sw mirroring Entry <id>

Severity WARNING

Description This message specifies that a mirroring software table entry cannot be deletedbecause the table is empty or an ID cannot be found.


Message Could not enable the hw mirroring Entry <id>

Severity WARNING

Description This message specifies that a mirroring hardware table entry cannot be addedbecause of an incorrect ID or the lack of an OS resource


Message Could not find the Ip Rec forIndex

Severity ERROR

Description This message is generated when the system tries to read the memory locationof an existing IP record.

Action Contact customer support for further troubleshooting.

Message Could not get the area structure for aId= _._._._

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.

C Messages 49

Description This message is generated when you attempt to pass an invalid or null area tode-couple OSPF.

Action The area is not present so no action is required.

Message Could not start AuCacheAging Task, <errno>

Severity FATAL

Description This message indicates the task could not be created.


Message Could not start portMgr Task, <value>,

Severity FATAL

Description This message indicates the portMgr task could not be created.


Message cpp2LargeFbufInit: Can’t allocate memory!

Severity FATAL

Description This message is generated when the system could not allocate memory forFBUF which is used to either transmit or process large received packets. Thismeans the system will not be able to perform receive or transmit functions.

Action Reboot the switch and contact the customer service team if the problempersists.

Message cppAddDefaultRouteHook: ifAddrSet failed!

Severity ERROR

Description This message is generated when the registration of the CP interface withvxWorks has failed. Any communication with the vxWorks IP stack will alsofail.


Message cppAddDefaultRouteHook: ifFlagChange failed!

Severity ERROR

Description This message is generated when registration of the CP interface with vxWorksfails. Any communication with the vxWorks IP stack will also fail.



NN46200-706 01.01 Standard16 June 2008


.


Message cppAddDefaultRouteHook: ifMaskSet failed!

Severity ERROR

Description This message is generated when registration of the CP interface with vxWorksfails. Any communication with the vxWorks IP stack will also fail.


Message cppAddDefaultRouteHook: routeAdd failed!

Severity ERROR

Description This message is generated when registration of the CP interface with vxWorksfails. Any communication with the vxWorks IP stack also fails.


Message cppAllocFBufs: malllc(<value>) failed

Severity ERROR

Description This message is generated when the system could not allocate memory forFBUF which is used to either transmit or process a received packet. Thissystem is not able to perform receive or transmit functions.

Action N/A

Message cppGetFBuf: bdInUse <value> bdGptr <value> bdGptr <value>

Severity ERROR

Description This message is generated when the buffer that has been allocated by thesystem is already is in use. It either means there has been an error during thecleanup or some other software issue has arisen. Depending on the cause ofthe problem, it may have serious consequences.

Action N/A

Message cppGetFBuf: netFreeRxGtbuf <value> failed!!

Severity ERROR

Description This message is generated when some type of pointer corruption hashappened, or if somewhere else the gtBuf has incorrectly been released(freed).

Action N/A

Message cppInitFBufPool: Can’t allocate memory!

Severity FATAL


NN46200-706 01.01 Standard16 June 2008


.

C Messages 51

Description This message is generated when the system could not allocate memory forFBUF which is used to either transmit or to process a received packet. Thismeans system is not able to perform receive or transmit functions.


Message cppProcAuMsgBody: Port not in Vlan! Mac <mac> VlanId <id> Port<portnum>

Severity WARNING

Description This message is generated when some mismatch has occurred in terms ofreceiving a packet, or when software information regarding the port/VLAN anddriver/hardware information is out of sync.

Action N/A

Message cppProcAuMsgBody: STG Vlan for MLT not found! Mac <mac> VlanId <id>MltId <mltid>

Severity WARNING

Description This message is generated when the MLT is not a member of the SpanningTree Group (STG) that the VLAN belongs to.

Action N/A

Message cppProcAuMsgBody: STG Vlan for Port not found! Mac <mac> VlanId <id>Port <portnum>

Severity WARNING

Description This message is generated when the port does not seem to be a member ofthe STG that the VLAN is configured for.

Action N/A

Message cppProcAuMsgBody: Vlan for MLT not found! Mac <mac> VlanId <id> MltId<mltid>

Severity WARNING

Description This message is generated when the MLT does not seem to be a member ofthe expected VLAN. This indicates that the software information regarding theport/VLAN and driver/hardware information is not synchronized.

Action N/A

Message cppProcAuMsgBody: Vlan for Port not found! Mac <mac> VlanId <id> Port<portnum>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when port does not seem to be member of theexpected VLAN. This indicates that the software information regarding theport/VLAN and driver/hardware information is out of sync.

Action N/A

Message cppProcAuMsgBody:Port Corrupted! Port <portnum>

Severity ERROR

Description This message is generated when some inconsistencies are seen in the givenaddress update message.

Action N/A

Message cppProcTxFrame: cppTxFrame failed!

Severity ERROR

Description This message is generated when processing the request to send the packetfrom the TX_QUEUE of the main Task fails. The packet is not sent out.However, the application may not be aware of this.

Action N/A

Message cppPutFBuf: netFreeRxGtbuf <value> failed!!

Severity FATAL

Description This message is generated when the buffer that is being allocated by thesystem is already is in use. It either means some error has occurred duringthe cleanup, or indicates some other software issue has arisen.


Message cppPutFBuf: NULL address!

Severity FATAL

Description This message is generated when the memory allocated for FBUF has beencorrupted.


Message cppPutFBuf: Trying to put a free BD!

Severity ERROR

Description This message is generated when FBUF has already been freed or the FBUFchain is corrupted.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

C Messages 53

Message cppSchedule is invoked not from tMainTask

Severity FATAL

Description This message indicates that according to the software design, this function isbeing incorrectly invoked. It should only be called by tMainTask.


Message cppStart: Can’t create CP Port receive task!

Severity FATAL

Description This message is generated when a drastic situation arises and the systemceases bringing up an operation. For example, during system start-up, it couldnot create tMainTask to perform the majority of the switch functions.


Message cppStart: Can’t create socket tx task

Severity INFO

Description This message is generated when a drastic situation arises and the systemceases bringing up an operation. For example, during system start-up, it couldnot create a task used to process the request to send packets.

Action N/A

Message cppStart: Inconsistent value of the CP physical port number!

Severity INFO

Description This message is generated when a drastic situation arises and the systemceases bringing up an operation. For example, during the system start-up, thephysical port representation does not match the expected value.

Action N/A

Message cppTxFrameBody: can’t take semaphore!

Severity FATAL

Description This message is generated when the system could not obtain the semaphoreneeded to transmit packet.


Message cppTxFrameBody: could not create gtBuf for transmit vlan=<vlanid>

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated during the packet transmit from the system gtBufbuffer when the driver is not available. Thus, the packet that needs to be sentfor the VLAN will not be sent.

Action N/A

Message cppTxFrameBody: could not free netFreeTxGtBuf

Severity ERROR

Description This message is generated when some type of pointer corruption hasoccurred, or if somewhere else the gtBuf has incorrectly been released (freed).

Action N/A

Message cppTxFrameBody: No room for the TxPH! (off=<value>)

Severity ERROR

Description This message is generated when the packet is not transmitted.

Action N/A

Message cpu is hotstandby

Severity ERROR or INFO+B360

Description This is an informational message indicating that the CPU is the standby CPU.

Action N/A

Message Creation of temporary vlan failed for loopback

Severity WARNING

Description This message indicates that the creation of the temporary VLAN failed forloopback.


D MessagesMessage Dead interval <value> is not a multiple of <value>

Severity WARNING

Description This message indicates that the dead interval entered is not a multiple of theOSPF hello interval.

Action Enter a valid dead interval multiple of the OSPF hello interval.

Message delete MAC record < MAC Address> of IP RSMLT Peer Failed when StopForwarding for Peer

Severity Warning


NN46200-706 01.01 Standard16 June 2008


.

D Messages 55

Description This message is generated when IP routing is not disabled for an IP RSMLTpeer Mac address when RSMLT discontinues backup forwarding for that peer.

Action You can continue to operate the chassis, but contact customer service with thefollowing information available: system logs including any memory dumps,switch configuration, and network topology for further analysis.

Message Deny/Permit setting update failed while updating next hop for Acl <value> Ace<value> with status

Severity ERROR

Description This message indicates the ACE is in redirect mode and the specifiednext-hop became available/unavailable. However, the filter could not beupdated in hardware.

Action Check the ARP and hardware next-hop tables.

Message Deny/Permit setting update for for filter action FAIL with status: <value>

Severity ERROR

Description This message indicates the ACE is in redirect mode and the specifiednext-hop became available/unavailable. However, the filter could not beupdated in hardware.


Message detected bad timer_cum logic

Severity ERROR

Description This message is generated when there is no OSPF timer to link or a timer isfaulty.

Action Rerun OSPF.If the problem is not resolved, contact customer service with the followinginformation available for further analysis:

• system logs, including any memory dumps

• switch configuration

• network topology

Message detected loop - 1: timer <value> TRYING TO LINK A TIMER THAT ALREADYEXISTS

Severity ERROR

Description This message is generated when the system tries to link a timer that alreadyexists.

Action Internal protocol error, upgrade the software.


NN46200-706 01.01 Standard16 June 2008


.


Message detected loop - 2: timer 0x%x TRYING TO LINK A TIMER THAT ALREADYEXISTS

Severity ERROR

Description This message is generated when the system tries to link a timer that alreadyexists.

Action Internal protocol error, upgrade the software.

Message detected loop in ospfLink

Severity ERROR

Description This message is generated when the OSPF timer link runs more than theexisting number of timers.

Action Rerun OSPF.If the problem is not resolved, contact customer service with the followinginformation available for further analysis due to insufficient MLT’s:




Message DHCP server is configured to offer VRRP IP address %s to DHCP client

Severity ERROR

Description This message is generated when the VRRP virtual IP address on the switch isconfigured as a DHCP server.

Action Verify the server IP is not configured as the VRRP virtual IP.

Message DHCP server is configured to offer LOCAL IP address %s to DHCP client

Severity ERROR

Description This message is generated when the local switch IP address is configuredas the DHCP server.

Action Verify the server IP is not configured as the local switch IP address.

Message DHCP server is configured to offer Relay Agent IP address %s to DHCP client

Severity ERROR

Description This message is generated when the current relay agent IP address isconfigured as DHCP server.

Action Verify the server IP is not configured as the local relay agent.

Message diagUpdatePortMirrorStructures_8300: Invalid Mode ID <value>


NN46200-706 01.01 Standard16 June 2008


.

E Messages 57

Severity WARNING

Description This message indicates that an incorrect mirroring mode parameter exists.


Message DLD file <file> is not found

Severity WARNING

Description This message indicates that the DLD file is not found.

Action Copy the DLD file to the flash.

Message dmaStartupLoopback: Can’t send frame! seq=<value> len=<value>

Severity ERROR

Description This message identifies a cppTxFrame() return failure when doing theloopback test.


Message due to insufficient MLT’s

Severity INFO

Description The possible reason for this message is that the "PreConfigTask: Slot <value>NO pre-configured."

Action N/A

E MessagesMessage EapApplyVlanAndPri: unable to add port -- to vlan --

Severity ERROR

Description This message indicates that the system encountered an unexpected errorwhile trying to add the 802.1X authorized port to the VLAN returned by theRADIUS server.


Message EapApplyVlanAndPri: unable to add port -- to vlan --

Severity ERROR

Description This message is generated when the system encounters unexpected errorwhile trying to add the 8021x authorized port to VLAN returned by RADIUSserver.


Message EapApplyVlanAndPri: Unable to set Qos priority -- for port --


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message indicates that the system encountered an error while it triedto apply the QOS priority returned by the RADIUS server to the 802.1Xauthorized port.

Action Verify that the QOS priority configured on the RADIUS server is valid.

Message EapApplyVlanAndPri: Unable to set Qos priority -- for port --

Severity ERROR

Description This message is generated when system encounters error while it tries toapply the QOS priority returned by RADIUS server to the 8021x authorizedport.

Action Verify that QOS priority configured on RADIUS server is valid

Message eapInitTx: malloc failed for buf

Severity ERROR



Message eaplnitTx: malloc failed for buf

Severity ERROR

Description This message indicates that the system is out of memory while executing thesoftware.


Message EapProcessPktFromSupp: malloc failed!

Severity ERROR

Description This message indicates that the system is out of memory while executing thesoftware.


Message EapProcessPktFromSupp: malloc failed!

Severity ERROR



Message EapTransmitEapolPkt: Can’t send frame!


NN46200-706 01.01 Standard16 June 2008


.

E Messages 59

Severity ERROR

Description This message indicates that the system encountered an unexpected errorwhile sending an EAPOL frame out of a port.


Message EapTransmitEapolPkt: Can’t send frame!

Severity ERROR

Description This message is generated when system encounters unexpected error whilesending out an EAPOL frame out of a port.


Message Enable Mirroring FAILED for Entry <id> Deleting the mirroring recordÉ

Severity WARNING

Description This message specifies that a mirroring hardware table entry could not beadded because of an incorrect ID or a lack of OS resources.


Message errmsg <msgcode>

Severity ERROR

Description This message lists the error code when bootp cannot obtain the file name.

Action Ensure that the file is on the flash.

Message Error - Fail STG consistency check

Severity ERROR

Description This message is generated when an STG consistency check fails.


Message Error - Fail to create STG <value> for mgmt VLAN

Severity ERROR

Description This message is generated when the setting of a row on the STG table fails.


Message Error - Fail to delete STG

Severity ERROR

Description This message is generated when the deletion of an STG fails.



NN46200-706 01.01 Standard16 June 2008


.


Message Error - Fail to delete VLAN

Severity ERROR

Description This message is generated when the deletion of a VLAN fails.


Message Error Could not enable radius SNMP accounting Task radSnmpAcct notspawned

Severity ERROR

Description This message indicates the system is unable to create a task to handleRADIUS accounting requests.


Message Error in deleting task radSnmpAcct

Severity ERROR

Description This message indicates the system is unable to delete the task created tohandle RADIUS accounting requests.


Message Error in initializing FwdListId object

Severity ERROR

Description This message is generated when allocation for the Fwd List Id object to storethe Fwd List Ids fails.


Message error in reading data from the PCMCIA

Severity INFO

Description This message is generated when PCAP tries to do autosave to PCMCIA andit cannot read the PCMCIA.

Action Insert a PCMCIA card in the switch or set the autosave path to network.

Message Error: ActId = <value> AclType = <value> Act create operation FAIL

Severity WARNING

Description This message is generated when the default template cannot be createdduring filter module initialization.

Action Try a manual configuration or reboot the switch.

Message Error: port <port> is locked\n\n

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

F Messages 61

Description This message indicates that a VCT test cannot be run on a port that is locked.

Action Unlock the port and run the test.

Message ERROR: sysI2cWriteRepRead Failed

Severity WARNING

Description This message indicates that an SFP SEEPROM cannot be read.

Action Try replacing the SFP. If it still does not work, contact the customer supportteam.

Message Error: There is no VRRP for Vrid ___

Severity Info

Description This message is generated when there is no VRRP instance of this Vrid.

Action Confirm that a VRRP instance with this Vrid exists.

Message Error: There is no VRRP configured

Severity Info

Description This message is generated when there are no VRRP instances configured.

Action Confirm the proper configuration of any VRRP instances.

Message Error: There is no VRRP for Vlan ___

Severity Info

Description This message is generated when there are no VRRP instances configured inthis vlan.

Action Confirm that VRRP instances are configured in this Vlan.

F MessagesMessage fail config STG for mgmt VLAN

Severity ERROR

Description This message is generated when an attempt to create an STG for thespecified VLAN fails.


Message failed deleting a route in rcIpRouteTblSet()

Severity ERROR

Description This message is generated when the deletion of a route fails.



NN46200-706 01.01 Standard16 June 2008


.


Message Failed to assign IP address to mgmt VLAN

Severity ERROR

Description This message is generated when assigning an IP address to the managementVLAN fails during the system initialization pre-configuration process.

Action Contact Customer Support for further troubleshooting.

Message Failed to connect TCP socket to server xyz port xyz, errno xyz

Severity ERROR

Description Failed to set socket connect operation to specific TACACS+ server

Action N/A

Message Failed to create IMC VLAN

Severity ERROR

Description This message is generated when creating an IMC VLAN fails during thesystem initialization pre-configuration process.


Message Failed to create semaphore for authenticating with TACACS+ protocol

Severity ERROR

Description Cannot create a semaphore for sending messages to TACACS+ task. Systemresources might be low.

Action N/A

Message Failed to create semaphore for rcTacacsGlobalGrpConsistencyCheck

Severity ERROR

Description Cannot create a semaphore for sending configuration messages to TACACS+task. System resources might be low.

Action N/A

Message Failed to create semaphore for rcTacacsGlobalGrpGet

Severity ERROR


Action N/A

Message Failed to create semaphore for rcTacacsServerTblConsistencyCheck


NN46200-706 01.01 Standard16 June 2008


.

F Messages 63

Severity ERROR


Action N/A

Message Failed to create semaphore for rcTacacsServerTblGet

Severity ERROR


Action N/A

Message Failed to create semaphore for rcTacacsServerTblSet

Severity ERROR


Action N/A

Message Failed to create STG for IMC VLAN

Severity ERROR

Description This message is generated when creating an STG for IMC fails during thesystem initialization pre-configuration process.


Message Failed to find a unused IP address

Severity ERROR

Description This message is generated when an attempt to obtain an unused IP addressfails.


Message FAILED To Initialize Xbar on slot <value>

Severity ERROR

Description This message indicates that crossbar initialization was unsuccessful.


Message Failed to open TACACS+ protocol pipe

Severity ERROR

Description TACACS+ client application is down. Cannot send messages to TACACS+task.


NN46200-706 01.01 Standard16 June 2008


.


Action N/A

Message Failed to open socket

Severity Error

Description This message is generated when the socket cannot be opened.


Message Failed to open socket

Severity Fault

Description This message indicates that the system did not create the required socketwhen you started the SSCP server.

Action Verify that a new socket is available, disable and enable NSNA globally, orconfirm NSANS configuration.

Message Failed to spawn sscp task

Severity Fault

Description This message is created when the system fails to create an SSCP task.

Action Disable and enable NSNA globally. Verify there are enough resourcesavailable to create a new SSCP task.

Message Failed to spawn sscp task

Severity Error

Description This message is generated when spawn sscp task has failed.

Action Check the system status.

Message FAILED To write mcast table to Xbar on slot <value>

Severity ERROR

Description This message indicates that the multicast table was not successfully writtento the crossbar on the standby CPU.


Message -FATAL- null parameter to function

Severity ERROR

Description This message is generated when there are no required parameters in theSMLT/SLT up message.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

F Messages 65

Message -FATAL- sltTblSync: malloc failed!

Severity ERROR

Description This message is generated when a malloc SLT sync message has failed.

Action Check memory usage.

Message -FATAL- smltSmltInfoSync: malloc failed!

Severity ERROR

Description This message is generated when a malloc smlt sync message has failed.

Action Check memory usage

Message -FATAL- vlanTblEntrySync: malloc failed!

Severity ERROR

Description This message is generated when table-based synchronization of the IPaddress assigned to a VLAN occurs. This is caused by unavailable memoryand thus, memory cannot be allocated for the entry.

Action Increase the DRAM size.

Message file <file> function <function> line <line> bitnum <bitnum> Software licenseviolation <message>

Severity WARNING

Description This message specifies a software license violation. There is no license toexecute this command.

Action Contact the customer support team.

Message file already present in the PCMCIA

Severity INFO

Description This message is generated when PCAP tries to save captured packets to thePCMCIA (autosave). The file is already present and PCMCIAWRAP is false.

Action Set PCMCIAWRAP to TRUE or remove the file from the PCMCIA.

Message Filter Attachment to port <port num> failed

Severity Error

Description This message is generated when the system fails to attach a filter to an NSNAport.

Action Disable and enable NSNA on the port.

Message Filter could not be configured on interface <value>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when restoring a filter configuration for ports onthe hot-inserted card is unsuccessful.

Action Reconfigure the filters or source the configuration file.

Message Finished insertion for slot <value>

Severity INFO

Description This message indicates that the insertion process has finished.

Action N/A

Message Finished removal for slot <value>

Severity WARNING

Description This message indicates that the removal process has finished.

Action N/A

Message First message received from NSNAS <messageType> is not connectioninitiation message

Severity Error

Description This message is generated when the initial message is not recieved by theERS8300.

Action Check for possible mismatch of the ERS8300 and NSNAS versions.

Message First message received from NSNAS <msg type> is not connection initiationmessage.

Severity Fault

Description When you initiate an SSCP connection, the first message tyoe the systemreceives from NSNAS is a connection initiation message type. This faultmessage indicates that the first message type the system received is notthe connection initiation message type. The system discards the receivedmessage type.

Action No action required.

Message FloodLSA: invalid - circuit null

Severity FATAL

Description This message is generated when the interface for flooding the LSA is NULL.


NN46200-706 01.01 Standard16 June 2008


.

F Messages 67

Action Contact customer service with the following information available for furtheranalysis:




Message for Entry <id> Deleting the mirroring recordÉ

Severity WARNING

Description This message is generated when the system could not add a mirroringhardware table entry because of an incorrect ID, or the lack of an OSresource.


Message Forward-next-hop is available but bind FAIL with status: <value>

Severity ERROR

Description This message indicates that ACE with redirect mode and reachable next-hopis not able to forward to the next-hop because the filter and next-hop cannotbe bound together in hardware.


Message Forward-next-hop Update FAIL with status: <value>

Severity ERROR

Description This message indicates ACE is in redirect mode and the specified next-hop isavailable/unavailable, but the filter cannot be updated in hardware.


Message free space <value> bytes is less than minimum <value> bytes

Severity INFO

Description This message indicates that the free space in PCMCIA is less than theconfigured value for SMP. Thus, logging to PCMCIA has stopped.

Action Free up some space in PCMCIA by moving or deleting files from PCMCIA.

Message free space <value> bytes is less than minimum <value> bytes. Logging toPCMCIA stopped

Severity INFO

Description This message indicates that the free space in PCMCIA is less than theconfigured value for SNP.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message Freeup MLT and re-insert card

Severity INFO

Description This message provides a possible solution for "PreConfigTask: Slot <value>NO pre-configured."

Action N/A

G MessagesMessage gcntDeleteEgressCntrSet: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt todelete an egress counter set failed.


Message gcntGetEgressCntrs: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attemptto get egress counters failed.


Message gcntSetEgressCntrMode: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt tocreate an egress counter set failed.


Message gcosGetTc2UserPrio: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt toobtain a class-to-802.1p-map failed.


Message gcosGetUserPrio2Dp: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt toobtain an 802.1p-to-drop-precedence-map failed.



NN46200-706 01.01 Standard16 June 2008


.

G Messages 69

Message gcosGetUserPrio2Tc: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt toobtain an 802.1p-to-class-map failed.


Message gcosSetMacEntryTcOverrideEnable: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attemptto change the mac qos-level override option failed.


Message gcosSetPortDefaultTc: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt toport the default qos-level failed.


Message gcosSetTc2UserPrio: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attemptto set a class-to-802.1p-map failed.


Message gcosSetUserPrio2Dp: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attempt toset an 802.1p-to-drop-precedence-map failed.


Message gcosSetUserPrio2Tc: Failed, status = <value>

Severity ERROR

Description This message indicates a driver programming error. Specifically, an attemptto set an 802.1p-to-class-map failed.


Message gen_valpair FATAL out of memory


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message indicates that the system is out of memory.

Action If the problem persists, contact customer support.

Message gen_valpairs<string> Unknown Type

Severity ERROR

Description This message indicates that a RADIUS attribute unknown to the switch isbeing looked-up.

Action Verify that the sent and received RADIUS packet contains known attributes.

Message get_DevIdStart_from_Slot: Wrong Arg Slot <value>

Severity WARNING

Description This message indicates that a wrong slot number has been passed to thefunction.

Action N/A

Message get_PPPort_For_FrontPort: WRONG Arg cardType <value>, frontPort <value>

Severity FATAL

Description This message indicates that the port translation failed.

Action N/A

Message get_PPPort_For_FrontPort: WRONG CardType cardType <value>, frontPort<value>

Severity FATAL

Description This message indicates that the port translation failed.

Action N/A

Message GetDropPrecValueFromTapi: unexpected value

Severity ERROR

Description This message identifies an application programming error. Specifically, theconformance level is not in range.


Message gprtPortOverrideTcEnable: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toset the change port 802.1p override option failed.


NN46200-706 01.01 Standard16 June 2008


.

G Messages 71


Message Gratuitous Arp is not sent out for IP RSMLT node for IfIndex <Interface ID>

Severity Error

Description This message indicates that RSMLT failed to transmit a gratuitous ARP forduplicate address detection.

Action You can continue to operate the chassis, but note the scenario that results inthe occurrence of this error message.Record the error message and configuration, and reboot the chassis. Contactcustomer service and have the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message gtcmBindTrafficCondToAction: Failed, status = <value>

Severity ERROR

Description This message specifies a driver programming error. Specifically, an attempt tobind a policy to a filter failed.


Message gtcmCntEn: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toenable/disable statistics on a policy or filter failed.


Message gtcmCreateTcEntry: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt tocreate a policy entry in hardware failed.


Message gtcmDeleteTcEntry: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt todelete a policy entry in hardware failed.


Message gtcmGetTrafficMeterCounters: Failed, status = <value>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message identifies a driver programming error. Specifically, an attemptto obtain policing stats failed.


Message gtcmPolicingEn: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toenable/disable policing globally failed.


Message gtcmSetTcDefaultDscp: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error.Specifically, an attempt toset the default DSCP failed.


Message gtcmSetTcEntryConfCounters: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toobtain conformance counters failed.


Message gtcmSetTcEntryFlowAggrCounters FAIL TcId <value>

Severity ERROR

Description This message indicates that clear statistics/counters failed for the filter.

Action Try to enable/disable statistics on the filter.

Message gtcmSetTcLengthType: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toset the length type for stats purpose failed.


Message gtN8300TapiCleanRemDevsmcGroup failed

Severity ERROR

Description This message indicates that a cleanup of multicast information during a hotremoval failed.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

G Messages 73

Message gtN8300TapiCleanRemDevsmirror failed

Severity ERROR

Description This message indicates that a cleanup of mirroring info during a hot removalfailed.

Action N/A

Message gtN8300TapiCleanRemDevsTrunk failed

Severity ERROR

Description This message indicates that a cleanup of trunk info during a hot removalfailed.

Action N/A

Message gtN8300TapiCleanRemDevsVlan failed

Severity ERROR

Description This message indicates that a cleanup of VLANs information during a hotremoval failed.

Action N/A

Message gtTxPort4TcGetDescNumber: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toobtain the Tx queue buffer size failed.


Message gtTxPort4TcMaxDescNumber: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toobtain the Tx queue buffer size failed.


Message gtTxPortBindPortToDropProfileSet: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attemptto bind a drop profile to a port failed.


Message gtTxPortConfigTrafficClassDropProfileSet: Failed, status = <value>


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toset a drop profile failed.


Message gtTxPortDropMode: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toset a port drop mode failed.


Message gtTxPortFlushQueues: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attemptto flush the Tx queue failed.


Message gtTxPortGetDescNumber: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attemptto obtain the port buffer size failed.


Message gtTxPortMaxDescNumber: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toset the port buffer size failed.


Message gtTxPortQSetArbGroup: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toset the Tx queue scheduler group failed.


Message gtTxPortQSetShaperProfile: Failed, status = <value>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

H Messages 75

Description This message identifies a driver programming error. Specifically, an attempt toset the Tx queue shaper profile failed.


Message gtTxPortQSetWrrProfile: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attemptto set the WRR profile failed.


Message gtTxPortQShaperEnable: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toenable/disable the Tx queue shaper failed.


Message gtTxPortQTxEnable: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toenable/disable the Tx queue failed.


Message gtTxPortSetShaperProfile: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attemptto set the port shaper profile failed.


Message gtTxPortShaperEnable: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toenable/disable the port shaper failed.


H MessagesMessage HAL_Init: NPAL_GtNhopTblInit failed

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message identifies a failure in the software next hop table initializationprocess.


Message Head pointer passed as NULL for adding an entry to SNMP SessionsLinkedList

Severity ERROR

Description This message identifies a software error.

Action Contact customer support for assistance.

Message Head pointer passed as NULL for removing an entry from SNMP SessionsLinkedList

Severity ERROR



Message HoldupForwardingForPeer: Can’t add ARP and MAC for peer, IP RSMLTdown on vlan <VLAN ID>

Severity Error

Description This message is generated when RSMLT fails to include an ARP entry andMAC address during the RSMLT peer forwarding holdup time. This error mayimpact Rsmlt backup functionality.


Message HoldupForwardingForPeer: vlan <VLAN ID> is not existed, IP RSMLT down

Severity Error

Description This message indicates that a valid Vlan is not found during the RSMLT peerforwarding holdup time.


Message Hot Insert: boardAfterInitConfig failed for slot <value>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

H Messages 77

Description This message occurs when the system is unable to obtain the requiredlogical initialization parameters. These parameters contain important systeminitialization information.


Message Hot Insert: hotSyncInsertDev fail

Severity ERROR

Description This message indicates that a hot insertion failed for a newly- inserted card inthe system.


Message Hot Insert: packetDevListTxDemoRevA failed for slot <value>

Severity ERROR

Description This message indicates that the configuration of a particular device port failed.


Message Hot Insert: sysDevListEnableTraffic failed for slot <value>

Severity ERROR

Description This message identifies a problem in device port initialization since thisfunction is responsible for preparing a device port to receive traffic.


Message Hot Insert: trRegisterFunc failed for slot <value>

Severity ERROR

Description This message indicates that the registration of functions required for hotinsertion failed.


Message Hot Insert: trUpdateAppDemoPpConfigList failed for slot <value>

Severity ERROR

Description This message indicates that the updating of the ppDemo Configuration listfailed.



NN46200-706 01.01 Standard16 June 2008


.


Message Hot insertion failed for device <value>

Severity ERROR

Description This message indicates that a hot insertion failed for a newly- inserted card inthe system for the given device.


Message Hot removal failed for device <value>

Severity ERROR

Description This message indicates that a hot removal of a given device for a particularslot failed.

Action N/A

Message Hot removal of slot <value> xbar failed

Severity ERROR

Description This message indicates that crossbar removal/cleanup was unsuccessful.

Action N/A

Message Hot Remove: device <value> does not exist

Severity ERROR

Description This message specifies that during hot removal, a given device on the hotremoved slot does not exist.

Action N/A

Message Hot Remove: hotSyncRemoveDev failed for slot <value>

Severity ERROR

Description This message indicates that a hot removal of a given slot failed.

Action N/A

Message Hot Remove: trDowndateAppDemoPpConfigList failed for slot <value>

Severity ERROR

Description This message indicates that a hot removal of a given slot failed.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

I Messages 79

I MessagesMessage iDLStart: rcIpGetIf returns NULL

Severity ERROR

Description This message is generated if no IP record exists. The IfIndex may be out ofrange, or there is no IP record for the IfIndex.


Message If Index Count is <value> cannot be decremented for Acg Id <value>

Severity ERROR

Description This message indicates a filter module’s table management keeps adependency between the ACG and Ifindex in order to allow/prevent ACGmodification or deletion.

Action Check the dump using aclDumpAcgTbl() and aclDumpIfIndexTbl(). Delete filterconfiguration from all ports, delete ACGs, and then recreate them.

Message IfRec(ipaddr=<ipaddr>, index=<index>) - Exceeded NVRAM limit of <value>

Severity WARNING

Description This message is generated when the available NVRAM space for storingrecords is exhausted.

Action No action needs to be taken.

Message igmp_event_handler : corrupt msg

Severity Error

Description A corrupt message is received by the igmp event handler.

Action N/A

Message igmp_event_handler(): igmpGetInterface() FAIL for IfIdx <value>

Severity Warning

Description An interface index cannot be obtained when an igmp event is handled.

Action Contact technical support.

Message igmpAddMltMap: could not allocate mem for p_entry

Severity ERROR

Description memory allocation failure

Action N/A

Message igmpCacheTblEntryAdd:Can’t malloc.

Severity Error


NN46200-706 01.01 Standard16 June 2008


.


Description A failure to allocate memory for igmp cache table has occurred.


Message igmpCacheUnsolData: unable to allocate IGMP_SRCGRP

Severity ERROR

Description This message is generated if the source/group pair allocation is unsuccessful.This is because the memory allocation for the source/group pair failed due to lowDRAM memory.


Message igmpCreateSrcRec: unable to allocate IGMP_SRC

Severity ERROR

Description This message is generated when trying to allocate memory for the IGMP sourcegroup and the system finds that it is unable to do so due to low memory.

Action Increase the DRAM size.

Message igmpCreateTimer Can’t allocate memory

Severity Error

Description A failure to allocate memory for igmp timer has occurred.


Message igmpCreateTimer: Creating FINITE timer

Severity Error

Description An igmp timer is not created because the timer type is FINITE.


Message IgmpGrpCreate : Error in igmpAlloc!

Severity ERROR

Description This message is generated when you try to create a new IGMP group, but there isnot enough memory to save it. This error can be caused by a lack of memory.


Message igmpGrpCreate: Error in imgpSetUpARRec

Severity ERROR

Description This message is generated when trying to add a port to an MGID entry and addan AR record for any source/group pair. It can appear because the MGID cannotbe created, or you are trying to add an invalid port to a group.

Action Check validity of the port and contact customer support for further troubleshooting.


NN46200-706 01.01 Standard16 June 2008


.

I Messages 81

Message igmpL2Send: cannot send frame

Severity ERROR

Description This message is generated when an attempt to send out control packets fails.

Action If message does not stop, then cppTxFrame may have failed.

Message igmpPresteraSessionIsActive: ipmGetMatrixCounter Could not get the Countervalue

Severity WARNING

Description This message identifies a failure to obtain a matrix counter for the multicastsender activity check.

Action N/A

Message igmpPresteraSessionIsActive: ipmSetMatrixCounter Could not set the counter

Severity ERROR

Description This message identifies a failure to set the matrix counter for the multicast senderactivity check.

Action N/A

Message igmpRxPkt: cannot send frame

Severity ERROR

Description This mesage indicates that the control packet could not be sent out.

Action N/A

Message igmpRxPkt(), igmpGetInterface IfIdx = <value>

Severity Warning

Description A null interface index is generated when igmp receive packets are handled.


Message igmpSrcLstDelete: arDeletePortFromGroup failed

Severity FATAL

Description This message is generated while trying to delete a port from a source/group pair.

Action Contact customer service and have the following information available for furtheranalysis: system logs including any memory dumps, switch configuration, andnetwork topology.

Message igmpInit: unable to allocate tSGBlock

Severity Error


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when allocating buffers to store SG entries fails,when initiating an IGMP module.

Action N/A

Message igmpGrpCreate: Error in igmpAlloc

Severity Error

Description This message is generated when allocating buffers to store group informationfails, when creating an IGMP group.

Action N/A

Message igmpL2Send: cannot send frame

Severity Error

Description This message is generated when layer 2 IGMP frames cannot be transmitted.

Action N/A

Message igmpGroupOifUpdate: failed to allocate memory

Severity Error

Description This message is generated when allocating buffers to store outgoing interfaceinformation fails, when updating this information.

Action N/A

Message igmp_access_head alloc failed

Severity Error

Description This message is generated when allocating buffers to store prefix listinformation fails, when initiating an IGMP access control module.

Action N/A

Message igmpTurnAroundFrame: cannot send frame

Severity ERROR

Description This message indicates that the control packet could not be sent out.

Action N/A

Message igmpUpdUnsolRec: Unsol rec for port <value> should have been deleted bynow

Severity ERROR

Description This message is generated if an unsolicited record is found.

Action This is an internal error. Contact customer support for further troubleshooting.


NN46200-706 01.01 Standard16 June 2008


.

I Messages 83

Message image download done

Severity INFO

Action N/A

Message image programming done

Severity INFO

Description This message specifies that image programming was completed during theimage upgrading process.

Action N/A

Message image programming started, ....

Severity INFO

Description This message specifies that image programming to the PoE DIMM controllermodule has started.

Action N/A

Message Impossible Neighbor State

Severity FATAL

Description This message is generated when an invalid neighbor state is encountered.





Message Impossible returncode from ospfProcLsa()

Severity FATAL

Description This message is generated when an invalid return code from an LSAprocedure is encountered.






NN46200-706 01.01 Standard16 June 2008


.


Message indexAdd() - failed adding

Severity ERROR

Description This message indicates that an error occurred when adding a policy entry inwhich the entry already exists.

Action N/A

Message indexAdd() - failed adding

Severity Error

Description Adding a Pim table failed.

Action N/A

Message init_pim_mrt: malloc failed

Severity Error

Description A malloc failure occurred.


Message init_pim : malloc failed

Severity Error

Description A malloc failure has occurred.


Message Insertion of card failed for Slot <value> !

Severity WARNING

Description This message indicates the card insertion process was unsuccessful.

Action Re-insert or replace card.

Message invalid action of changing SMLT or SLT ID in RSMLT

Severity Error

Description This message indicates that the system received an invalid parameter whenRSMLT attempted to update the SMLT and SLT IDs in a Vlan.

Action You can continue to operate the chassis, but note the scenario that resultsin the occurrence of this error message. Record the error message andconfiguration, and contact customer service with the following informationavailable: system logs including any memory dumps, switch configuration, andnetwork topology for further analysis.

Message Invalid Card Type

Severity WARNING

Description This message specifies that an invalid card type was detected.


NN46200-706 01.01 Standard16 June 2008


.

I Messages 85

Action N/A

Message Invalid Card Type fpr phyInit Slot <value>

Severity WARNING

Description This message indicates that an invalid card type has been detected.

Action N/A

Message invalid - circuit is null

Severity FATAL

Description This message is generated when an invalid interface circuit (NULL) isencountered while trying to acknowledge LSA.





Message Invalid configuration: network appears in two areas

Severity INFO

Description This message is generated when the same route appears for different areas.

Action Configure the network properly so there is no repetition.

Message invalid interface index

Severity ERROR

Description This message is generated when a VLAN ID is out of range. For example, ifyou enable or disable IGMP for the circuit using an invalid VLAN, then thiserror message occurs.

Action Provide a valid VLAN ID. Check the instructions in the VLAN configurationcommand. If this error persists, then contact customer support for furtherinformation.

Message invalid lsai ptr

Severity FATAL

Description This message is generated when the system encounters an invalid pointerto the LSA identifier.


NN46200-706 01.01 Standard16 June 2008


.






Message invalid page choice

Severity Error

Description This message indicates the system receives an invalid parameter when youdisplay RSMLT information.

Action Note the scenario that results in the occurrence of this error message. Recordthe error message and configuration, and contact the Nortel TechnicalSolutions Center for assistance.

Message Invalid Port <value>

Severity ERROR

Description This message indicates that port translation failed.

Action N/A

Message invalid power supply configuration detected, PoE disabled and all PoE powerremoved

Severity ERROR

Description This message indicates that mixed types of power supplies were installed inthe chassis.

Action Remove or replace power supplies to ensure that there are no mixed typesof power supplies installed.

Message invalid profile <value>

Severity ERROR

Description This message identifies an invalid task for profiling.


Message Invalid VR IP addresses %d.%d.%d.%d received for Vrid %d on IfIndex %d

Severity ERROR

Description This message indicates that there is a mismatch between a VR IP received bythe switch and the VR IP configured for the VRRP instance.

Action Configure the VRRP instance to correct the VR IP mismatch.


NN46200-706 01.01 Standard16 June 2008


.

I Messages 87

Message Invalid VR IP addresses ___ received for Vrid ___ on IfIndex ___

Severity Warning

Description This message is generated if the router receives an VRRP advertisementhaving an incorrect VRRP IP address for a VRID.

Action Confirm that all the routers with the same VRID have the same VR IP address.

Message IP Interface removed, Delete Rsmlt Node Failed on IfIndex <Interface ID>

Severity Error

Description This message is generated when deleting an RSMLT Node fails, which cancause a memory leak.


Message ip2GarbageList: Could not allocate mem for garbage!!!

Severity ERROR

Description This message indicates memory allocation failed for garbage collection list.

Action Close all CLI sessions to free up memory. Contact customer support if theproblem persists.

Message IPC timed out on <value> connections

Severity ERROR

Description This message indicates that the connection between the CP and I/O cardstimed out.

Action Hot-remove and hot-insert the I/O card.

Message IpCircEvent : Unable to find IpRec for IfIndex

Severity FATAL

Description This message is generated when the circuit I/O channel is in an alive state andsystem tries to read the memory location to an existing IP record.

Action Contact customer service and have the following information availablefor further analysis: system logs including any memory dumps, switchconfiguration, and network topology.

Message ipCliSettPimdebugBootstrap: value is Invalid

Severity Error

Description An invalid Bootstrap parameter is received.


NN46200-706 01.01 Standard16 June 2008


.



Message ipCliSettPimdebugHello: value is Invalid

Severity Error

Description An invalid hello is received.


Message ipCliSetPimGlobMode: pimMode Invalid <value>

Severity Error

Description Attempting to globally set an unsupported PIM mode.

Action N/A

Message ipCliSettPimdebugGraft: value is Invalid

Severity Error

Description An invalid Graft parameter is received.

Action

Message ipCliSettPimdebugJoinPrune: value is Invalid

Severity Error

Description An invalid prune message is received.


Message IpDecrMaskCntr : negative # of intf with mask

Severity ERROR

Description This message is generated when the route mask counter is less than zero foran IP circuit that has to be deleted.


Message IpDoSpecial: ipNetToMediaPhysAddress_index arpadd failed!

Severity ERROR

Description This message is generated when you try to add a static ARP entry from JDMand the action fails.


Message IpDoSpecial: ipNetToMediaPhysAddress_index Port %d not a member of vlan

Severity ERROR

Description This message is generated when the supplied Ifindex (Interface index which isunique for each port or VLAN) is not associated with any VLAN.



NN46200-706 01.01 Standard16 June 2008


.

I Messages 89

Message IpDoSpecial: ipNetToMediaPhysAddress_index rcIpLoadArpRecfailed

Severity ERROR

Description This message is generated if an attempt to load the ARP entry into the staticARP table fails.

Action The ARP table may be corrupted or the system is unable to allocate memory.

Message ipForward: pP2IpBd == NULL

Severity ERROR

Description This message is generated when the frame desc buffer passed is NULL.


Message ipLocAddrFind: Can’t find IfIndex for cid

Severity FATAL

Description This message is generated when the system tries to find the local IP addressand no IP record exists for the given interface index. The system software IPtable could be corrupted.


Message ipmcRx: Can’t find circuit for cid <cid>!

Severity FATAL

Description This message indicates that you cannot get the IP circuit.

Action N/A

Message IpmMltMcastDistributionGrpSet: Set Mcast Mlt Global

Severity Error

Description This message is generated when attempts to globally set Mlt multicastdistribution fail.

Action N/A

Message IpmMltMcastDistributionGrpSet: Set Mcast Software Forwarding

Severity Error

Description This message is generated when attempts to set Ip multicast forwarding fail.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message ipNetToMediaPhysAddress_index NULL snmp_arp_circ

Severity ERROR

Description This message is generated when the physical address you have supplied isnot associated with any circuit.


Message ipNetToMediaPhysAddress_index vlanGetVlanIdFromIfIndex failed for IfIndex

Severity ERROR

Description This message is generated if there is no VLAN associated with the interfaceindex.


Message ipPktOut: ipCircFromId failed for cid

Severity ERROR

Description This message is generated when the circuit pointer for a specific circuit ID isNULL.


Message ipPktOut: Unable to find IpRec for IfIndex

Severity ERROR

Description This message is generated when the pointer to the framebuffer descriptor ofthe last IP packet received from the CPP module is null.


Message ipReasmInit: Can’t allocate ipNDBTbl!

Severity ERROR

Description This message is generated when system is not able to allocate memory for theNet data block table.

Action Close all CLI sessions to free up memory. Contact customer support ifproblem persists.

Message ipReasmInit: Can’t allocate ipReasmTbl!

Severity ERROR

Description This message is generated when the system is not able to allocate memoryfor the IP reassembly table.



NN46200-706 01.01 Standard16 June 2008


.

L Messages 91

Message IpRec does not exist for IfIndex <value>

Severity ERROR

Description This message is generated when the IP record does not exist for thecorresponding IP address when trying to update the OSPF.





Message ipv4EnableVr <vrid> failed

Severity Fault

Description When you enable MVR, the system enables VR 0. This message indicatesthat the system failed to enable VR 0 and MVR will not function.


K MessagesMessage Keepalive expired for <value> connection with Id <value> to Slot <value>

Severity ERROR

Description This message indicates the connection between the CP and I/O card timedout.

Action Hot remove and hot insert the I/O card.

L MessagesMessage LACP ERROR: HA-CPU: Unable to spawn HA LACP PortScan task

Severity Error

Description This message is generated when the system is unable to initiate an HA LACPport scan task.

Action High Availability (HA), is not supported in Ethernet Routing Switch 8300Releases 4.1 and earlier. Ignore this message.

Message LACP ERROR: rcLacpGlobalGrpSet: Set LACP Glob

Severity Error

Description This message indicates that an error has occurred in the LACP globalconfiguration.

Action Reboot the switch.


NN46200-706 01.01 Standard16 June 2008


.


Message LACP ERROR: lacpTxLacpdu: Can’t get BD!

Severity Error

Description This message is generated when the volume of protocol packets the systemtransmits in a short duration exceeds the maximum the allocated system buffersize can process.

Action Reduce the number of system protocols running simultaneously.

Message LACP ERROR: lacpTxLacpdu: Can’t send frame!

Severity Error

Description This message indicates that the system cannot transmit an LACP PDU.An LACP configured port has failed or there is insufficient system memoryavailable.

Action Check the status of LACP configured ports or confirm the availability of systemmemory.

Message LACP ERROR: send_markerpdu: Can’t get BD!

Severity Error

Description This message is generated when the volume of protocol packets the systemtransmits in a short duration exceeds the maximum the allocated system buffersize can process.

Action Reduce the number of system protocols running simultaneously.

Message LACP ERROR: send_markerpdu: Can’t send frame!

Severity Error

Description This message indicates that the system cannot transmit a marker PDU.An LACP configured port has failed or there is insufficient system memoryavailable.

Action Check the status of LACP configured ports or confirm the availability of systemmemory.

Message LACP ERROR: Can’t add MAC range filter for EAP and LACP!

Severity Error

Description This message indicates that you have exceeded the system limit for EAP orLACP MAC range filters. LACP and VLACP cannot function.

Action No action required. The distribution of MAC range filters is software controlled.

Message LACP ERROR: Can’t del MAC range filter for EAP!

Severity Error


NN46200-706 01.01 Standard16 June 2008


.

L Messages 93

Description This message indicates that the system cannot delete an EAP MAC rangefilter.

Action Enable and disable VLACP. If this fails to clear the error, there can be a MACrange filter hardware failure. Contact customer service and have the followinginformation available: system logs including any memory dumps, switchconfiguration, and network topology for further analysis.

Message LACP ERROR: Can’t add MAC range filter for EAP !

Severity Error

Description This message indicates that the system cannot add an EAP MAC range filter.


Message LACP ERROR: Can’t delete MAC range filter for EAP and LACP

Severity Error

Description This message indicates that the system cannot delete an EAP and LACP MACrange filters.


Message LACP ERROR: lacpInitAggr: Can’t allocate memory for aggregator!

Severity Fatal

Description This message indicates that the system cannot allocate sufficient memory forthe internal aggregator structure.

Action Use the show sys info command to view the amount of unused memory.Adjust system function to decrease memory usage or add memory to yoursystem.

Message LACP ERROR: lacpInitPort: Can’t allocate memory for port!

Severity Fatal

Description This message indicates that the system cannot allocate sufficient memory forinternal LACP port structure.

Action Use the show sys info command to view the amount of unused memory.Adjust system function to decrease memory usage or add memory to yoursystem.

Message lbStart: NPAL_AddMacAddress failed with <value>


NN46200-706 01.01 Standard16 June 2008


.


Severity WARNING

Description This message indicates the NPAL_AddMacAddress failed when doing aloopback test.


Message lbStart: NPAL_DeleteMacAddress failed

Severity WARNING

Description This message indicates the NPAL_DeleteMacAddress failed when doing aloopback test.


Message lbStart: NPAL_RestoreVlanAfterLoopBack failed

Severity WARNING

Description This message indicates the NPAL_RestoreVlanAfterLoopBack failed whendoing loopback test.


Message Link Down <value>.Port is a trunk port

Severity WARNING

Description This message specifies the link-down status for a trunk port.

Action N/A

Message Link Down <value>.Port is an access port

Severity ERROR

Description This message specifies the link-down status for a VLAN access port.

Action N/A

Message LinkUp: NPAL_PortMacFltEnable FAILED

Severity ERROR

Description This message indicates that a port MAC filter enable failed.


Message listen failed for SSCP socket

Severity Error

Description This message is generated when listen for SSCP socket has failed.



NN46200-706 01.01 Standard16 June 2008


.

L Messages 95

Message listen failed for SSCP socket

Severity Fault

Description This message indicates that the system cannot perform the listen operationon the SSCP socket.

Action Verify the operation of the socket, disable and enable NSNA globally, orconfirm NSANS configuration.

Message lldpInitTx: lldp_alloc failed for buf

Severity ERROR

Description This message is generated when a memory related problem occurrs whileinitializing a transmission on LLDP.

Action Reboot required.

Message lldpduSend: Can’t send frame!

Severity ERROR

Description This message is generated when the CP card has failed to send an LLDPpacket.

Action Ignore message.

Message LLDP:Unable to set Dot3 Power-via-MDI TLV on a non-power port x/y

Severity ERROR

Description This message is generated when the Power-via-MDI TLV cannot be set ona non-POE port.


Message LLDP:Unable to set extendedPSE TLV on a non-power port x/y

Severity ERROR

Description This message is generated when the ExtendedPSE TLV cannot be set on anon-POE port.


Message LLDP: Unable to set Port x/y LLDP Status

Severity Info

Description This message is generated when the LLDP status of the port x/y is not setto default during initialzation.


Message LogFileSize <value> bytes is exceeding allowed log file size


NN46200-706 01.01 Standard16 June 2008


.


Severity INFO

Description This message specifies that the log file size exceeds the allowed file size.

Action N/A

Message LogFileSize <value> bytes is exceeding Maximum log file size

Severity INFO

Description This message specifies that the log file size exceeds the configured maximumlog file size.

Action N/A

Message Logging to PCMCIA stopped

Severity INFO

Description This message indicates that SMP logging to the PCMCIA has stopped.

Action N/A

Message logSendFatalLog: fail to malloc

Severity FATAL

Description This message specifies a memory allocation failure.


Message logSendFatalLog: fail to read <msg>

Severity ERROR

Description This message indicates a failure to read a file.

Action N/A

Message lsai->i_ref_count is zero

Severity FATAL

Description This message is generated if the reference count of a retransmit LSA is 0.






NN46200-706 01.01 Standard16 June 2008


.

M Messages 97

M MessagesMessage Mac %s movement from port -- to --

Severity WARNING

Description This message is generated when a non-EAP MAC moves from an EAPenabled port to another port.

Action Verify that the movement happened only when the MAC is physically movedfrom an EAP port to another port.

Message Malloc failed

Severity ERROR

Description This message indicates that the system has run out of memory.


Message malloc failed for port vlan list <Slot/Port>

Severity Error

Description This message is generated when an attempt to malloc the vlan list for aspecified port has failed.

Action Check the system memory.

Message malloc failed switch->SAC message. msg Type <typeNum>, msg Len <size>

Severity Error

Description This message is generated when malloc memory for the message has failed.

Action Check the system memory

Message malloc failed switch->SAC message. msg Type <>, msg Len <>

Severity Fault

Description This message indicates that there is insufficient system memory for the switchto transmit an NSNAS message.

Action Use the show sys perf command to view system memory utilization. Disableand enable NSNA globally.

Message malloc failed for port vlan list <x/y>

Severity Fault

Description This message indicates that the system failed to apply memory to record theVLAN type when you configured an NSNA port.

Action Use the show sys perf command to view system memory utilization. If thereis not enough available memory, reboot the switch.


NN46200-706 01.01 Standard16 June 2008


.


Message malloc failed in ospfLinkToBERefreshed

Severity ERROR

Description This message is generated when after completion of SPF, the system failsattempts to refresh the ospf link abd, due to the inability of the memoryallocation.


Message malloc of message parameter failed

Severity ERROR

Description This message indicates that memory allocation has failed.


Message Matching TCP, UDP and other L4 fields is not configured, Setting ipfragmentsoption to ’any’ for Acl-Id <value> Ace-id <value>

Severity WARNING

Description This message indicates that the filter is restored to match packets, irrespectiveof the fragmentation condition. This is true if the rule is not required to matchLayer 4 fields.

Action Specify the desired fragments match condition in the rule after clearing Layer 4match fields in the rule.

Message Matching TCP, UDP and other L4 fields is not supported for fragmentedpackets, Setting ipfragments option to ’non-fragments’ for Acl-Id <value>Ace-id <value>

Severity WARNING

Description This message indicates that matching Layer4 fields is not possible withstateless filtering. Be aware of this limitation.

Action Specify non-fragments in the rule before configuring Layer 4 match fields toavoid this message.

Message Maximum number of allowed TACACS+ simultaneous logins reached, pleasetry later

Severity INFO

Description More then 8 users are trying to login simultaneously to the switch usingTACACS+ authentication.

Action N/A

Message Maximum number of SNMP sessions are already running Access Denied


NN46200-706 01.01 Standard16 June 2008


.

M Messages 99

Severity ERROR

Description This message indicates that the number of SNMP connections has exceededthe maximum limit.

Action Terminate unwanted SNMP connections.

Message mcosGetCosByDscpDp: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. Specifically, an attempt toget the dscp-to-cos-policed-map failed.


Message mcosSetCosByDscpDp:Marking Table Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. In this case, an attempt toset the dscp-to-cos-policed-map failed.


Message mcosSetCosByDscpDp:remarking Table Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. In this case, an attempt toset the dscp-to-cos-policed-map failed.


Message mcosSetCosByTcDp: Failed, status = <value>

Severity ERROR

Description This message identifies a driver programming error. In this case, an attempt toset the class-to-802.1p-policed-map failed.


Message Memory allocation Error for dmrtentry S <value> G <value>

Severity Warning

Description A failure to allocate memory for snoop met entry has occurred.

Action Reduce the running configuration file size or reboot the switch. the switch.

Message Memory allocation Error for grpentry <value>

Severity Warning


NN46200-706 01.01 Standard16 June 2008


.


Description A memory allocation Error for grp has occurred.


Message Memory allocation Error for srcentry <value>

Severity Warning

Description A memory allocation Error for src has occurred.


Message Message New Mac -- Old Mac -- - Port -- being shut down

Severity WARNING

Description This message is generated when a new Mac Address is seen on an 8021xauthorized port.

Action The port is shut down. Initialize the port again.

Message Message not sent for deleting msgQ for snmp accounting

Severity ERROR

Description This message indicates the Passport 8300 is unable to free software resources.


Message Message not sent for sending interim accounting message for snmp accounting

Severity ERROR

Description This specifies that a RADIUS accounting interim message was not sent due toa software error.

Action If problem persists, contact customer support.

Message Message not sent for sending on accounting message for snmp accounting

Severity ERROR

Description This specifies that a RADIUS accounting ON message was not sent due to asoftware error.


Message Message not sent for sending stop accounting message for snmp accounting

Severity ERROR

Description This specifies that a RADIUS accounting STOP message was not sent due toa software error.


Message Mirroring Disable FAILED for Entry <id>


NN46200-706 01.01 Standard16 June 2008


.

M Messages 101

Severity WARNING

Description When a mirroring port is detected as not present, the Passport 8300 cannotdelete a mirroring hardware table entry because of an incorrect ID or a lack ofOS resources.


Message Mirroring Enable FAILED for Entry <id>

Severity WARNING

Description When a mirroring port is detected as present, the Passport 8300 cannot enablea mirroring hardware table entry because of an incorrect ID or a lack of OSresources.


Message mltGo: Mlt Table Initialization failed

Severity ERROR

Description This message indicates that the initialization of trunks in the hardware failed.


Message mltHasNonDisabledActivePort: can’t lock mutex!

Severity Error

Description This message is generated when there is insufficient system memory or there isa conflict in data access.

Action Use the show sys per command to check system memory resource utilization.Reboot the switch and contact customer service with the following informationavailable: trace level 5 4, any memory dumps, switch configuration, and networktopology for further analysis.

Message mltDesgPortDisabled: can’t lock mutex!

Severity Error

Description This message is generated when there is insufficient system memory or there isa conflict in data access.

Action Use the show sys per command to check system memory resource utilization.Reboot the switch and contact customer service with the following informationavailable: trace level 5 4, any memory dumps, switch configuration, and networktopology for further analysis.

Message mltLinkDown:Del port from h/w failed for MLT Id <value> Mlt Port <value>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message indicates that on link-down of an MLT port, the hardware clean-upfailed.

Action The switch may be usable, but further MLT operations can fail. It isrecommended that you reboot the switch and contact the customer support teamif the problem persists.

Message mltLinkUp:Add port to h/w failed for MLT Id <value> Mlt Port <value>

Severity ERROR

Description This message indicates that on link-up of an MLT port, the hardware updatefailed.

Action The switch may be usable, but further MLT operations can fail. Nortel Networksrecommends that you reboot the switch and contact the customer support teamif the problem persists.

Message Module id is wrong

Severity FATAL

Description This message specifies that the wrong module is used.


Message msgSendDbgMsg: failed to get CP slot number

Severity FATAL

Description This message identifies a failure to get the CP slot number when sending amessage from the coprocessor.


Message MSTP INFO New CIST Root (self)

Severity Info

Description This message indicates that the switch is configured as the new CIST rootswitch.


Message MSTP INFO New CIST Root (<bridge-id of new CIST Root>)

Severity Info

Description This message indicates that the switch you are accessing recognizes thenetwork switch with the specified bridge ID as the new CIST root switch.



NN46200-706 01.01 Standard16 June 2008


.

M Messages 103

Message MSTP INFO MSTP Region change (New Region <Selector:Name:RevLevel:ConfigDigest>)

Severity Info

Description This message indicates a change in the switch MST configurationidentification, which occurs when you create a new VLAN or MSTI, or thereis a change in the region name, selector or revision level. This messageappears at bootup and when there is a region change.


Message MSTP INFO New CIST Regional Root (self)

Severity Info

Description This message indicates that the switch you are accessing is the new CISTregional root switch for the region to which the switch belongs.


Message MSTP INFO New CIST Regional Root (<bridge-id of new Regional Root>)

Severity Info

Description This message indicates that the switch you are accessing recognizes thenetwork switch with the specified bridge ID as the new CIST regional rootswitch for the region to which the switches belong.


Message MSTP INFO New MSTI Root (self) for MSTI <msti-instance>

Severity Info

Description This message indicates that the switch you are accessing is the new MSTIroot switch for the MSTI instance of the region to which the switch belongs.


Message MSTP INFO New MSTI Root (<bridge-id of new CIST Root>) for MSTI<msti-instance>

Severity Info

Description This message indicates that the switch you are accessing recognizes thenetwork switch with the specified bridge ID as the new MSTI root switch forthe MSTI instance of the region to which the switch belongs.


Message MSTP INFO MSTP Port Role Change (CIST, <port or MLT>, <new PortRole>)

Severity Info


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when a CIST port role changes.


Message MSTP INFO MSTP Port Role Change (MSTI <msti-instance>, <port or MLT>,<new Port Role>)

Severity Info

Description This message is generated when a MSTI port role changes.


Message MSTP INFO Port Protocol Migration (<port or MLT> <Mstp | StpCompatible>)

Severity Info

Description This message is generated when port BPDUs change from STP to MSTP orfrom MSTP to STP.


Message MSTP INFO OperEdge disabled on port <port or MLT>

Severity Info

Description This message indicates that an MSTP port with edge-port administrativelyenabled receives a BPDU that changes the operational edge-port value tofalse (disabled).


Message Must enable Multicast Distribution over MLT on peer

Severity INFO

Description This message is generated when multicast distribution over MLT on a peer isnot enabled, but it is required.

Action Enable multicast distribution over MLT on peer.

Message Must disable Multicast Distribution over MLT on peer

Severity INFO

Description This message is generated when multicast distribution over MLT on a peermust be disabled.

Action Disable multicast distribution over MLT on peer.

N MessagesMessage New connection from ip <IPAddr> port <remotePortNum>

Severity Info


NN46200-706 01.01 Standard16 June 2008


.

N Messages 105

Description This message is generated when a new SSH connection from a specifiedIP/Port pair occurs.

Action N/A

Message New Filter <acgID> Attachment to port <PortNum> failed

Severity Error

Description This message is generated when a new filter cannot be attached to a specifiedport.

Action Confirm that the filter is valid and the NSNA service is disabled to attach thefilter.

Message New Mac -- Old Mac -- - Port -- being shut down

Severity WARNING

Description This message indicates that a new Mac Address is seen on an 802.1Xauthorized port and the port is shut down.

Action Re-initialize the port.

Message New vlan <VlanID> is non SSA

Severity Error

Description This message is generated when the vlan is not an NSNA vlan.

Action Configure the vlan as an NSNA vlan.

Message New vlan <> is non SSA

Severity Fault

Description This message indicates that the new VLAN ID the system received in theConfigPortExt or ConfigPort message from NSNAS, does not belong to anNSNA VLAN.

Action Review and confirm switch and NSNAS configuration.

Message nncli_commonCliInit : nnclip is still NULL

Severity ERROR

Description This message indicates that the Passport 8300 was unable to allocate memoryfor the NNCLIP.

Action N/A

Message nnclip init failed

Severity ERROR

Description This message indicates the Passport 8300 was unable to initialize NNCLIP.


NN46200-706 01.01 Standard16 June 2008


.



Message nnRstDot1dScalarsGrpSet: can’t lock mutex!

Severity Error



Message nnMstBridgeTblSetBody: can’t lock mutex!

Severity Error



Message nnRstDot1dScalarsGrpSet: can’t lock mutex!

Severity Error



Message No card Type for Slot <value>

Severity WARNING or ERROR

Description This message indicates that card type information is not available.


Message no memory for p_querier

Severity Error

Description A failure to allocate memory for igmp querier has occurred.



NN46200-706 01.01 Standard16 June 2008


.

N Messages 107

Message No PoE power supply detected, total PoE power= 0 watts

Severity ERROR

Description This message indicates that an invalid PoE power supply was installed.

Action Check to see if a legal PoE power supply was installed and if necessary, replacethe power supply.

Message No rarMacAddress record of VR with BackupMasterState up

Severity Error

Description This message indicates that a virtual MAC address record is not available whena switch is configured as a VRRP backup master. This is a result of VRRP timerprocess checking.


Message No resource for mac <value> vlan <value> status <value>

Severity WARNING

Description This message indicates that record space is not available to add a new MacAddress.

Action N/A

Message Non Eap Intrusion (-- -- --)

Severity INFO

Description This message is generated on encountering a new MAC when already maxnumber of non-EAP clients are seen and max number of EAP sesisons alreadyexists.

Action No action necessary due to a new MAC learn event on a port.

Message Non-Eap client with Mac -- on Port -- is not authnticated by Radius Server

Severity INFO

Description This message is generated when the radius server rejects the non-EAP-client’sauthentication request.

Action No action necessary.

Message Non-Eap host with Mac -- on Port -- is authenticated

Severity INFO

Description This message is generated when the radius server authenticates thenon-EAP-client.



NN46200-706 01.01 Standard16 June 2008


.


Message not enough resources to create new profile

Severity ERROR

Description This message indicates that there are not enough tasks to be profiled.


Message NPAL_AddArp: could not create local host entry <ip addr> for ifindex <value>

Severity WARNING

Description This message indicates that an attempt to add the 32-bit host route failed in thehardware. You need to add the 32-bit host route in hardware for each ARP entry.


Message NPAL_AddArp: IP address of the ARP is NULL

Severity ERROR

Description This message indicates that you cannot add an ARP entry where the IP addressequals 0. Even if you are setting the default route to CPU or DROP, you canbind the default route to special hardware next-hops without specifying the ARPIP equals 0.

Action N/A

Message NPAL_AddArp: ipv4CreateIpInterface failed for <ip addr> status <value>

Severity WARNING

Description This message indicates that an attempt to create the IP interface in hardwarefor the local ARP failed.


Message NPAL_AddArp: No more hardware space available in system for the arp

Severity ERROR

Description Currently, the Passport 8300 supports 2994 dynamic, static, and discard ARPentries. If you attempt to add a number beyond this limit, this message displaysto show that the hardware has no more space for ARP entries.

Action Either refrain from adding more ARP entries or delete some ARP entries to makeroom for the new one.

Message NPAL_AddIpRoute: Adding prefix failed entry <ip addr>/<value>, nhId <value>status <value>

Severity WARNING

Description This message indicates that an attempt to add the route to the hardware failed.


NN46200-706 01.01 Standard16 June 2008


.

N Messages 109


Message NPAL_AddIpRouteToCreateBulkEntry: failed deleting UcPrefix <prefix> prefixLen<value> status <value>

Severity WARNING

Description This message indicates that an attempt to delete a unicast prefix entry inhardware failed.


Message NPAL_AddIpRouteToDelBulkEntry: failed adding UcPrefix <prefix> prefixLen<value> status <value>

Severity WARNING

Description Failed to add a unicast prefix entry in hardware.


Message NPAL_CheckNextHopDelList: failed deleting UcnextHop <nextId> status <value>

Severity WARNING

Description Failed to delete a next hop entry in hardware.


Message NPAL_CreateCpuandDropNhIds: failed creating CPU NH, Status <value>

Severity ERROR

Description This message indicates that an attempt to create the special next-hop inhardware pointing to the CPU failed. This next-hop will be used by default routeand will never be deleted.


Message NPAL_CreateCpuandDropNhIds: failed creating DROP NH Status <value>

Severity ERROR

Description This message indicates that an attempt to create the special next- hop inhardware pointing to DROP failed. This next hop will be used by default routeand will never be deleted.


Message NPAL_CreateNhId: could not create next hop <ip addr>, Status <value>

Severity WARNING

Description This message indicates that an attempt to create the next-hop entry in hardwarefailed.


NN46200-706 01.01 Standard16 June 2008


.



Message NPAL_CreateSingleInlif: failed enabling Uc routing lifIfIndex: <value>, status:<value>

Severity INFO

Description You need to enable routing for each port on the Passport 8300. This messageindicates a failure in hardware when enabling IP routing for that interface.


Message NPAL_DeleteArp: Delete UcNextHop failed entry <ip addr> nhId <value> status<value>

Severity WARNING

Description This message indicates that an attempt to delete the next hop in hardware failed.


Message NPAL_DeleteArp: Failed deleting NextHop entry <ip addr> nhId <value> status<value>

Severity WARNING

Description This message indicates that an attempt to create the two next-hop entries inhardware, with one pointing to CPU and the other pointing to drop, failed.


Message NPAL_DeleteArp: failed deleting UcPrefix <ip addr> status <value>

Severity WARNING

Description This message indicates that an attempt to delete the 32-bit host route that isassociated with the ARP entry in hardware failed.


Message NPAL_DeleteIpRoute: delete route entry<ip addr>/<value> next-hop <ip addr>status <value> failed

Severity WARNING

Description This message indicates that an attempt to delete the route entry in hardwarefailed.


Message NPAL_EnableVrId: ipv4EnableVr failed

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

N Messages 111

Description This message indicates that an attempt to enable virtual route in hardware whenthe system comes up failed.


Message NPAL_EnableVrId: NPAL_CreateAllInlifs failed

Severity ERROR

Description This message should never appear.

Action N/A

Message NPAL_EnableVrId: NPAL_SetDefaultIpRoute failed

Severity WARNING

Description This message indicates that an attempt to set the default route to either CPU orDROP in the hardware failed.


Message NPAL_gbrgSetControlPktTc(%d) failed!

Severity Error

Description This message is generated when the system fails to configure the control packettraffic class.

Action Reboot the switch and contact customer service with the following informationavailable: trace level 5 4, any memory dumps, switch configuration, and networktopology for further analysis.

Message NPAL_gbrgSetArpIgmpTrapTc (%d) failed!

Severity Error

Description This message indicates that the system failed to configure the ARP or IGMPtraffic classes.


Message NPAL_gstpSetMode(%u, %u) failure code: %d!

Severity Error

Description This message indicates that the system failed to configure the STP mode.


Message NPAL_gstpSetMode(<value>, <value>) failure code: <value>!


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message indicates that the setting of multiple Spanning Tree mode failed.


Message NPAL_ProcCreateIpBulkListL Adding bulk prefix failed status <value>

Severity WARNING

Description Failed to add bulk unicast prefix entries in hardware.


Message NPAL_ProcDeIIpBulkList: Delbulk prefix failed status <value>

Severity WARNING

Description Failed to delete bulk unicast prefix entries in hardware.


Message NPAL_ProcDelArpBulkList: del bulk next hop failed status <value>

Severity WARNING

Description Failed to delete bulk next hop entries in hardware.


Message NPAL_ReplaceArp: could not override host next hop <ip addr> for portNum<value> NhopId = <value> Status = <value>

Severity WARNING

Description This message indicates an attempt to override the next-hop with new informationin hardware failed.


Message NPAL_ReplaceIpRoute: replace rt entry <ip addr>/<value> failed

Severity WARNING

Description This message indicates an attempt to override the route entry with newinformation in hardware failed.


Message NPAL_SetDefaultIpRoute: Failed to add prefix NHId=<value>, status <value>

Severity WARNING

Description This message indicates an attempt to set the default route to either CPU orDROP in hardware failed.



NN46200-706 01.01 Standard16 June 2008


.

N Messages 113

Message NSNA blocking Mac <MAC> in vlan <VlanID>

Severity Error

Description This message is generated when NSNA blocks a Mac address for a vlan, whichcan be caused by two PC clients in one port.

Action Check the client’s connection.

Message NSNA blocking Mac <mac_address> in vlan <vid>.

Severity Warning

Description This message indicates that the system blocked a MAC address in the specifiedVLAN.

Action Use the show nsna client command to see if there is another client of thesame type on the NSNA port.

Message NSNA port <Slot/Port>: move to red VLAN failed, so shutting down

Severity Error

Description This message is generated when a port cannot be moved to a red vlan.

Action Disable NSNA, administratively shut the port down and re-enable NSNA.

Message NSNA port <>: move to red VLAN failed, so shutting down

Severity Fault

Description This message indicates that the new VLAN ID in the ConfigPortExt or ConfigPortmessage from NSNAS is a red VLAN, but the NSNA port failed change state.The port shuts down.

Action For the action required to recover the system from the condition that caused thisfault message, see the NSNA port <>: To recover, disable nsna and admin downthe port message description.

Message NSNA port <Slot/Port>: To recover, disable nsna and admin down the port

Severity Error

Description This message is generated when a port cannot be moved to a red vlan.


Message NSNA port <>: To recover, disable nsna and admin down the port

Severity Fault

Description This message indicates that you disable NSNA and administratively shut downthe specific port to recover the system from the condition that caused the NSNAport <>: move to red VLAN failed, so shutting down to appear.


NN46200-706 01.01 Standard16 June 2008


.



Message NSNA port <Slot/Port>: move vlan failed, so moving to red state

Severity Error

Description This message is generated when an attempt to move a port to a specified vlanhas failed.


Message NSNA port <>: move vlan failed, so moving to red state

Severity Fault

Description This message indicates that the system failed to move a VLAN, so the specifiedNSNA port is moving to a red VLAN and red filter.

Action Review and confirm the NSNAS and switch configuration.

Message NTP Disabled

Severity INFO

Description An informational log message.

Action N/A

Message NTP Enabled

Severity INFO

Description An informational log message.

Action N/A

Message ntp global event sync failed

Severity ERROR

Description HA-syncing NTP global configuration to secondary CPU failed.

Action N/A

Message ntp key event sync failed

Severity ERROR

Description HA-syncing NTP key configuration to secondary CPU failed.

Action N/A

Message ntpCreateIntervalTimer: Can’t create interval timer!

Severity FATAL

Description Memory allocation failed.


NN46200-706 01.01 Standard16 June 2008


.

N Messages 115

Action N/A

Message ntpCreateKey: Can’t allocate Key Entry!

Severity FATAL


Action N/A

Message ntpCreateServer: Can’t allocate Server Entry!

Severity FATAL


Action N/A

Message ntpCreateServer: can’t lock mutex!

Severity ERROR

Description Couldn’t get the semaphore.

Action N/A

Message ntpFetchAndAdjustTime: can’t allocate serverList

Severity ERROR


Action N/A

Message ntpFetchAndAdjustTime: Select Error

Severity ERROR

Description The select function returns a negative value.

Action N/A

Message ntpHandleInput: Select error

Severity ERROR

Description The select function returned a negative value.

Action N/A

Message ntpInitIo: can’t allocate recvElement

Severity ERROR


Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message ntpInitIo: can’t allocate recvElement

Severity ERROR


Action N/A

Message ntpInitIo: can’t bind UDP socket to port 123

Severity ERROR

Description The socket bind failed.

Action N/A

Message ntpInitIo: can’t open UDP socket

Severity ERROR

Description The socket() function returned a negative value.

Action N/A

Message ntpReadServers: can’t allocate serverElement

Severity ERROR


Action N/A

Message ntps server event sync failed

Severity ERROR

Description HA-syncing NTP server configuration to secondary CPU failed.

Action N/A

Message ntpSendPkt: unable to forward UDP packet

Severity ERROR

Description The sendto() function returned a sentLength value == -1.

Action N/A

Message ntpStart: Can’t create mutex semaphore!

Severity FATAL

Description Semaphore creation failed.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

O Messages 117

Message ntpSyncCallback: Unrecognized message type

Severity INFO

Description Unknown message type.

Action N/A

Message ntpSyncCallback:corrupt msg

Severity ERROR

Description Syncing failed due to invalid module version in message.

Action N/A

Message number of index does not equal size of link list

Severity ERROR

Description This message indicates the index number of elements in the policy tablediffers from the size of the link list during the sanity check.

Action N/A

Message number of ipmc mll <value> has exceeded maximum <value>

Severity INFO

Description This message is generated when the number of IGMP snoop groups youcreate exceeds the maximum supported by the switch (2000). The IGMPgroup can function properly but system performance will deteriorate.

Action Reduce the number of IGMP snoop groups.

Message number of ipmc entry has reached maximum <value>, can not create forgrp_addr <group address>

Severity Fault

Description This message is generated when the number of IPMC groups you createexceeds the maximum supported by the switch (1024).

Action Reduce the number of IPMC groups on the switch.

O MessagesMessage oframe_alloc: buffer length too long

Severity ERROR

Description This message is generated when the length of the IP frame is more than themaximum allowed length of the frame buffer size.



NN46200-706 01.01 Standard16 June 2008


.


Message Old Filter <acgID> removal from port <PortNum> failed

Severity Error

Description This message is generated when an old filter cannot be removed from aspecified port.

Action Confirm that the filter is valid and the NSNA service is disabled to attach thefilter.

Message Operator type <value> is not supported will be treated as mask.

Severity INFO

Description The operators supported for match fields are Equal, greater-than-or-equal,less-than-or-equal, not-equal, mask. This message indicates that anunrecognized operator has been detected. This may be the result of corruptionor a missing/insufficient consistency check.

Action Try removing or enabling filters on the port, try to delete or create theACG from the port, and check the dump using aclDumpAclTbl() oraclDumpAceList().

Message os_init: failed init_avl

Severity FATAL






Message ospf_do_kill_nbr: Impossible State

Severity FATAL

Description This message is generated when the system encounters an invalid state forneighbor’s current state of conversation.





Message ospfAddLsai - lsa len <value> is > max_lsa_len


NN46200-706 01.01 Standard16 June 2008


.

O Messages 119

Severity ERROR

Description This message is generated if the LSA length is out of range.





Message ospfAddLsai lsa type <value>

Severity ERROR

Description This message is generated when the LSA type is invalid.





Message ospfAddTent: couldn’t allocate memory for path entry in the list

Severity WARNING

Description This message is generated when the system is unable to allocate memoryfor the path entry list.





Message ospfAddToReqList FAILED! nbr <ip address> lsid <lsid>

Severity ERROR

Description This message is generated when an attempt to append a list to the neighbor’srequest list fails, as a result of a req being inserted that already exists in thelist.






NN46200-706 01.01 Standard16 June 2008


.


Message ospfCopyIntfInfo: could not find the IpRec for <value>

Severity FATAL

Description This message is generated when no IP interface is found for the given IPaddress.





Message ospfExtLsaLink: calloc failed: could not link <lsid>

Severity ERROR

Description This message is generated when trying to allocate memory for LSA index ina linked list.





Message ospfFindLsai: invalid lsa type <value>

Severity ERROR

Description This message is generated when an invalid type is passed to find the LSA.

Action N/A

Message ospfFindLsai: Wrong lsa-type <value>

Severity FATAL

Description This message is generated if an LSA with unknown type is received.





Message ospfFlood: debug info ClrRtxCnt=<value> LsRefCnt=<value>

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.

O Messages 121

Description This message, generated before a Fatal error occurs, is the result of anunclear LSA ID, Receive nbr state that the system is unable to identify.


Message ospfFlood: rx_nbr=<routeId>, rx_nbr_st=<value> lsid=<lsid> old rtx <value>not clear

Severity FATAL

Description This message, generated before a Fatal error occurs, is the result of anunclear LSA ID, Receive nbr state that the system is unable to identify.





Message opsfLeak - invalid path type <value>

Severity FATAL

Description This message is generated if an invalid path type is encountered whenattempting to leak into OSPF intra area.





Message ospfLsaRefresh netlinks - no circ for ipa=<ip address>

Severity FATAL

Description This message is generated when the network links are being refreshed and noOSPF circuit is found for the IP address.





Message ospfLsaTimeout: lsai is null

Severity FATAL

Description This message is generated when an invalid LSA identity is obtained.


NN46200-706 01.01 Standard16 June 2008


.






Message ospfNeighborRetransmit: nbr=<routeId>, nbr_st=<value> lsid=<lsid>,type<value> old rtx <value> not clear

Severity FATAL

Description This message is generated when the system encounters an invalid referencecount for the LSA.





Message ospfProcDDP: interface is null

Severity FATAL

Description This message is generated when you are processing DDP packets anddiscover that interface is null.





Message ospfProcLSU: interface is null

Severity FATAL

Description This message is generated when the system encounters an invalid OSPFinterface while sending an LSU.






NN46200-706 01.01 Standard16 June 2008


.

O Messages 123

Message ospfProcLSR: invalid - circuit is NULL

Severity FATAL

Description This message is generated if the interface is a null due to internal protocolerror.





Message ospfRetransDel count=<value>

Severity FATAL

Description This message is generated when the reference count of the LSA to be deletedfrom the retransmit list is zero.





Message ospfRTXLink: failed to add

Severity FATAL

Description This message is generated when a new link could not be inserted in the nbrretransmission list.





Message ospfRTXLink: NULL Retransmit Entry

Severity ERROR

Description This message is generated if there is no retransmit entry.


NN46200-706 01.01 Standard16 June 2008


.






Message ospfSetCircArea: unable to find an IpRec for IfIndex <value>

Severity WARNING

Description This message is generated if an invalid index for an IP record is passed.





Message ospfSpfExtern: Running Incremental SPF when it is turned off

Severity ERROR

Description This message is generated when incremental SPF runs after being disabled.





Message ospfSpfInter: Running Incremental SPF when it is turned off

Severity ERROR

Description This message is generated when incremental SPF runs after being disabled.





Message ospfTimerLink invalid timer value <address>

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

O Messages 125





Message ospfTimerUnlink invalid timer value <address>

Severity ERROR

Description This message is generated when the system encounters an invalid OSPFtimer signature.





Message ospfUpdateLsai: len <value> is > max_len <value>

Severity FATAL

Description This message is generated when the length of the LSA packet is greater thanthe maximum length defined.





Message ospfUpdateLsai lsa type

Severity FATAL

Description This message is generated when the system encounters an invalid LSA type.





Message ospfUpdateLsai lsa type <value>


NN46200-706 01.01 Standard16 June 2008


.


Severity FATAL

Description This message is generated when the LSA is being updated and an undefinedLSA type is encountered.





Message ospfVCEvent

Severity FATAL

Description This message is generated when the virtual circuit event is invalid.





Message ospfVCEvent: could not find route for dst=<value>

Severity Error

Description This message is generated when the system is unable to obtain the MACaddress of the next hop to be used by the OSPF hello packet.

Action N/A

Message ospfVCEvent: could not find the arp info dst=<value>

Severity WARNING

Description This message is generated when the system looks up the ARP entry for thedestination IP address.

Action N/A

Message ospfVerLsaCsum: the length field in lsa seems to be invalid

Severity ERROR

Description This message is generated when the system encounters an invalid value forthe length of the LSA.


NN46200-706 01.01 Standard16 June 2008


.

P Messages 127





Message Out of power resource, redundant power admin remain disabled

Severity ERROR

Description This message indicates that not enough extra PoE power is reserved forbackup, so the status of the redundant power admin remains the same(disabled).

Action N/A

P MessagesMessage p2LargeFbufInit: Can’t allocate memory!

Severity FATAL

Description This message specifies that memory could not be allocated for FBUF whichis used to either transmit a packet, or process large received packets. Thismeans the system will be unable to perform receive or transmit functions.


Message Parsing of received xyz packet from TACACS+ server xyz failed

Severity ERROR

Description Basic parsing of received packet failed.

Action N/A

Message Password modified for user-exec mode

Severity INFO

Description This message indicates the password has been successfully changed foruser-exec mode.

Action N/A

Message PCAP File in PCMCIA is being over-written

Severity INFO

Description This message is generated when the PCAP autosave file in the PCMCIA isbeing overwritten.

Action Copy the file from the PCMCIA.


NN46200-706 01.01 Standard16 June 2008


.


Message Pcl size is unexpectedly large <value>

Severity ERROR

Description This message indicates that the specified ACG required more than 128 filtersin the hardware. This may result from an attempt to use rules with conditionalmatching like greater, less, range, not-equal.

Action Try to minimize the operators. If that does not hel, remove some ACEs fromthe ACLs.

Message PCMCIA is removed, Logging resumes on DRAM

Severity ERROR

Description This message indicates that the PCMCIA card is removed.

Action N/A

Message PD may be disconnected due to new power limit

Severity WARNING

Description This message indicates that the power limit was reduced which may cause thePD to be disconnected due to lack of power.

Action Check to see if any PD power has been disconnected and if necessary,re-assign the power limit.

Message Peer RSMLT IP <IP Address> is not in Local RSMLT IP subnet <IP Address>on Vlan <Vlan ID>

Severity Warning

Description This message indicates that an IST peer IP address received by RSMLT doesnot belong to the same RSMLT IP subnet.

Action Verify the IST peer IP addresses belong to the same IP subnet. If this errormessage continues to appear, contact customer service with the followinginformation available: system logs including any memory dumps, switchconfiguration, and network topology for further analysis.

Message peGetPortMacStats: coreGetMacCounter : GT_EXCESSIVE_COLLISIONS,port <value> failed

Severity WARNING

Description This message indicates that the MAC counter cannot be read.


Message PhyReadModeReg : Invalid Card Type Slot

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.

P Messages 129

Description This message indicates an invalid card type has been detected.

Action N/A

Message PhyReadSpeedReg: Invalid Card Type

Severity WARNING

Description This message indicates an invalid card type has been detected.

Action N/A

Message pimCandidateRpTblEntryAdd: Out of memory

Severity Error

Description There is no memory available to be allocated.


Message PoE backup power failure detected

Severity ERROR

Description This message indicates that a power supply failure has been detected. Theremaining PoE power may still able to support current PoE operation.

Action Replace the bad power supply or continue to operate without backup powersupport.

Message PoE backup power FATAL failure detected

Severity ERROR

Description This message indicates that a power supply failure has been detected. Theremaining PoE power cannot support the current PoE operations. All PoE cardswill be administratively power disabled and redistributed.

Action Replace the bad power supply.

Message PoE backup PSE is activated

Severity WARNING

Description This message indicates the backup power supply has started supplying PoEpower. Most likely, this will happen after a power supply failed or was removed.

Action Replace the bad power supply.

Message PoE backup PSE is present and on standby

Severity INFO

Description This message indicates a backup power supply has been detected and is readyto supply POE power when a power supply failure occurs.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message PoE is down

Severity INFO

Description This message indicates PoE card power was turned off.

Action N/A

Message PoE is up and running

Severity INFO

Description This message specifies that PoE starts operation.

Action N/A

Message PoE Slot <value> Main Power Usage Off (below threshold), PowerConsumption= <value>

Severity INFO

Description This message indicates that power usage is from a PoE card.

Action N/A

Message PoE Slot <value> Main Power Usage On (above threshold), PowerConsumption= <value>

Severity ERROR

Description This message indicates that power usage is from a PoE card.

Action N/A

Message POE_LOCK failed

Severity ERROR

Description This message specifies that the semaphore could not be obtained.

Action N/A

Message poeAppDownloadConfiguration: malloc failed!

Severity INFO

Description This message indicates the system is out of memory space for a configurationdownload.

Action N/A

Message poeAppDownloadImage: PoE IPC communication error!

Severity INFO

Description This message indicates that communication between CP and I/O modules failed.


NN46200-706 01.01 Standard16 June 2008


.

P Messages 131

Action N/A

Message poeDbInit: Could not create mutex

Severity ERROR

Description This message indicates the system could not obtain the semaphore.

Action N/A

Message Port (<port>) re-enabled by auto recovery

Severity INFO

Description This message is generated when a port shut down by CP-limit, Linkflap orSLPP is re-enabled by auto recovery.

Action N/A

Message port stream limit alloc failed

Severity Error

Description This message is generated when allocating buffers for IGMP stream limitation,based on port, fails.

Action N/A

Message p_intf_stream_limit alloc failed

Severity Error

Description This message is generated when allocating buffers for IGMP stream limitation,based on interface, fails.

Action N/A

Message p_intf_stream_limit alloc failed

Severity Error

Description A failure to allocate memory for stream-limit on an interface has occurred.


Message poePowerMgr: Could not start poePowerMgr task

Severity ERROR

Description This message indicates that the system was unable to execute the PoE task,so PoE operation stopped.

Action Reboot the switch.


NN46200-706 01.01 Standard16 June 2008


.


Message poePowerSourceScan: re-scan power profile

Severity ERROR

Description This message indicates a PoE power supply configuration error has beendetected.

Action Re-scan the power supply and rebuild the PoE power profile.

Message poeTask: PoE controller communication ERROR PoE is disabled

Severity ERROR

Description This message indicates that PoE controller initialization and communicationfailed.

Action Reset the PoE card using admin disable and then re-enable the card.

Message poeTask: PoE local DB init ERROR PoE is disabled

Severity ERROR

Description This message indicates that PoE local configuration database initializationfailed.


Message poeTask: PoE module init ERROR PoE is disabled

Severity ERROR

Description This message indicates that PoE operational configuration initialization failed.


Message poeTask: PoE power (48V ERROR PoE is disabled

Severity ERROR

Description This message identifies a PoE power 48V error.

Action Replace PoE card, PoE power supply, or PoE chassis.

Message poeTask: PoE task ERROR PoE is disabled

Severity ERROR

Description This message specifies that the system was unable to execute the PoE task,so PoE operation stopped.


Message poeTask: PSE power error detected, PoE is disabled

Severity ERROR

Description This message identifies a PoE power 48V error.


NN46200-706 01.01 Standard16 June 2008


.

P Messages 133


Message Policy Prefix table not init

Severity ERROR

Description This message indicates the policy prefix table has not been initialized.

Action N/A

Message Port -- aborting

Severity INFO

Description This message indicates that an 802.1X controlled port entered the abortingstate of the Authenticator PAE State machine.


Message Port -- aborting

Severity INFO

Description This message is generated when an 8021x controlled port enters the abortingstate of Authenticator PAE State Machine


Message Port -- authenticating

Severity INFO

Description This message indicates that an 802.1X controlled port entered theauthenticating state of the Authenticator PAE State Machine.


Message Port -- authenticating

Severity INFO

Description This message is generated when an 8021x controlled port enters theauthenticating state of Authenticator PAE State Machine


Message Port -- connecting

Severity INFO

Description This message indicates that an 802.1X controlled port entered the connectingstate of the Authenticator PAE State machine.



NN46200-706 01.01 Standard16 June 2008


.


Message Port -- connecting

Severity INFO

Description This message is generated when an 8021x controlled port enters theconnecting state of Authenticator PAE State Machine.


Message Port -- forced authorized

Severity INFO

Description This message indicates that an 802.1X controlled port has entered the forcedauthorized state of the Authenticator PAE State Machine.


Message Port -- forced authorized

Severity INFO

Description This message is generated when an 8021x controlled port enters the forcedauthorized state of Authenticator PAE State Machine


Message Port -- forced unauthorized

Severity INFO

Description This message indicates that an 802.1X controlled port has entered the forcedunauthorized state of the Authenticator PAE State Machine.


Message Port -- forced unauthorized

Severity INFO

Description This message is generated when an 8021x controlled port enters the forceunauthorized state of Authenticator PAE State Machine


Message Port -- held

Severity INFO

Description This message indicates that an 802.1X controlled port entered the held stateof the Authenticator PAE State Machine.


Message Port -- held

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.

P Messages 135

Description This message is generated when an 8021x controlled port enters the heldstate of Authenticator PAE State Machine


Message Port <portnum> PoE power is Off

Severity INFO

Description This message indicates that port PoE power was turned off.

Action N/A

Message Port <portnum> PoE power is On

Severity INFO

Description This message indicates that port PoE power was turned on.

Action N/A

Message portDisableMirrorByPort_8300: Wrong Mode <mode>

Severity WARNING

Description This message indicates that when disabling the mirroring port, the modeparameter is an incorrect value.


Message portDisableMirroring_8300: gmirrDelRxport port <#> failed

Severity WARNING

Description This message specifies that an RX port hardware entry deletion fails.


Message portDisableMirroring_8300: gmirrDelTxport port <#> failed

Severity WARNING

Description This message specifies that a Tx port hardware entry deletion failed.


Message portEnableFlowControl_8300 called for non-8300 port

Severity INFO

Description This message indicates there is a non-8300 port in the system.

Action N/A

Message portEnableFlowControl_8300: gprtPortFlowControlEnable Failed for port<value> Error <value>


NN46200-706 01.01 Standard16 June 2008


.


Severity WARNING

Description This message indicates that a hardware write failed for port flow control.

Action N/A

Message portEnableFlowControl_8300: gtPortXoffLimitSet Failed for port <value> Error<value>

Severity INFO


Action N/A

Message portEnableFlowControl_8300: gtPortXonLimitSet Failed for port <value> Error<value>

Severity INFO


Action N/A

Message portEnableMirrorByPort_8300: gmirrSetRxAnalyzerPort port <#> failed

Severity WARNING

Description This message indicates that the system is unable to configure the Rx analyzerport in hardware.

Action Verify the correct command parameters in documentation and try again.

Message portEnableMirrorByPort_8300: gmirrSetRxPort port <#> failed

Severity WARNING

Description This message indicates the system is unable to configure an Rx mirrored portin hardware.


Message portEnableMirrorByPort_8300: gmirrSetTxAnalyzerPort port <#> failed

Severity WARNING

Description This message indicates the system is unable to configure a Tx analyzer portin hardware.


Message portEnableMirrorByPort_8300: gmirrSetTxPort port <#> failed

Severity WARNING

Description This message indicates the system is unable to configure a Tx mirrored Portin hardware.


NN46200-706 01.01 Standard16 June 2008


.

P Messages 137


Message portEnableMirrorByPort_8300: Wrong Mode <mode>

Severity WARNING

Description This message indicates that when enabling the mirroring port, the modeparameter is an incorrect value.


Message portGetThrillRideSpeed: Non ThrilRide Card Type Slot <value>

Severity INFO

Description This message indicates that a non-8300 card is inserted in the specified slot.

Action N/A

Message portPollThrillRide: port=<value>, link is unstable!

Severity WARNING

Description This message indicates that an unstable link has been detected.

Action N/A

Message portSendCounterInfoToCP: trMsgAlloc failed

Severity FATAL

Description This message indicates that memory cannot be allocated.


Message portSendLinkInfoToCP: trMsgAlloc failed

Severity FATAL

Description This message indicates that memory cannot be allocated.


Message portVctCableStatus: normals=<value>,fails=<value>, shorts=<value>,opens=<value>, not <value> pairs

Severity ERROR

Description This message indicates that the number of cable statuses exceeds the numberof cable pairs.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message portVctDoTest: Could not get the Result in WA. gtStatus not OK: <value>

Severity ERROR

Description This message indicates that the result could not be obtained from the VCTtest.

Action Perform the test again.

Message portVctDoTest: Could not get the Result. gtStatus not OK: <value>

Severity ERROR

Description This message indicates the result could not be obtained from the VCT test.


Message portVctDoTest: Could not start the test in the WA. gtStatus not OK: <value>

Severity ERROR

Description This message indicates that the VCT test could not be performed.


Message portVctDoTest: Could not start the test. gtStatus no OK: <value>

Severity ERROR

Description This message indicates the VCT test could not be performed.


Message portVctDoTest: Could not write 0x2 into Reg30)

Severity ERROR

Description This message indicates that the information could not be written into theregister for the VCT test.


Message portVctDoTest: Could not write 0xa into Reg29)

Severity ERROR



Message portVctDoTest: Could not write back 0x0 into Reg30)

Severity ERROR



NN46200-706 01.01 Standard16 June 2008


.

P Messages 139


Message portVctDoTest: Could not write back 0xa into Reg29)

Severity ERROR



Message portVctDoTest: invalid portnum <port>

Severity ERROR

Description This message indicates that the specified port number is not correct.

Action Check the port number and perform the test again.

Message portVctDoTest: port <portnum> over high water mark

Severity ERROR



Message portVctInitOneRecord: Record #<record> greater than max <value>

Severity ERROR



Message portVctPortConfigurable: Bogus port #<value>

Severity ERROR



Message ppeGetPortMacStats: coreGetMacCounter : GT_BAD_CRC, port <value>failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_BRDC_PKTS_RCV, port<value> failed

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.




Message ppeGetPortMacStats: coreGetMacCounter : GT_BRDC_PKTS_SENT, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_COLLSIONS, port <value>failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_DROP_EVENTS, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_FC_SENT, port <value>failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_FRAGMENTS_PKTS, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_GOOD_FC_RCV, port<value> failed,

Severity WARNING




NN46200-706 01.01 Standard16 June 2008


.

P Messages 141

Message ppeGetPortMacStats: coreGetMacCounter : GT_GOOD_OCTETS_SENT,port <value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_GOOD_PKTS_RCV, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_GOOD_PKTS_SENT, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_JABBER_PKTS, port <value>failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_LATE_COLLISIONS, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_MAC_RCV_ERROR, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_MAC_TRANSMIT_ERR, port<value> failed


NN46200-706 01.01 Standard16 June 2008


.


Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_MC_PKTS_RCV, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_MC_PKTS_SENT, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_OVERSIZE_PKTS, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_PKTS_1024TOMAX_OCTETS, port <value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_PKTS_128TO255_OCTETS,port <value> failed

Severity WARNING




Severity WARNING



NN46200-706 01.01 Standard16 June 2008


.

P Messages 143


Message ppeGetPortMacStats: coreGetMacCounter : GT_PKTS_512TO1023_OCTETS, port <value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_PKTS_64_OCTETS, port<value> failed

Severity WARNING




Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : GT_UNDERSIZE_PKTS, port<value> failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter : RegNum <value>, port <value>failed

Severity WARNING



Message ppeGetPortMacStats: coreGetMacCounter: GT_GOOD_OCTETS_RCV, port<value> failed

Severity WARNING




NN46200-706 01.01 Standard16 June 2008


.


Message ppeInitMlt: Initialization of empty trunk groups failed

Severity ERROR

Description This message specifies a trunk initialization failure in the hardware duringsystem boot-up.


Message ppePhyInit: coreWrite to Reg 0x0 FAILED Slot <value> ppPort <value> retVal<value>

Severity WARNING

Description This message indicates that an attempt to write to a port physical registerfailed.



Severity WARNING




Severity WARNING




Severity WARNING



Message ppePhyInit: coreWrite to Reg 0x1D FAILED Slot <value> ppPort <value>retVal <value>

Severity WARNING



NN46200-706 01.01 Standard16 June 2008


.

P Messages 145


Message ppePhyInit: coreWrite to Reg 0x1E FAILED Slot <value> ppPort <value>retVal <value>

Severity WARNING



Message ppePoLDownloadImage: create ppePoLFwUpgradeTask task failed

Severity ERROR

Description This message indicates that the PoE task was unable to execute. Thus, thePoE image upgrading operation stopped.

Action Reset the PoE card using admin disable, re-enable the card, and then restartthe image upgrade process again.

Message ppePoLDownloadImage: image upgrade stopped

Severity INFO

Description This message indicates that image upgrading was stopped per instructionsfrom the CP.

Action N/A

Message ppePoLDownloadImage: invalid argument

Severity ERROR

Description This message identifies an invalid argument in the image download command.


Message ppePoLDownloadImage: invalid image file size

Severity ERROR

Description This message indicates that a download image file size mismatch wasdetected.

Action Reset the PoE card using admin disable, re-enable the card, and restart theimage upgrade process again.

Message ppePoLDownloadImage: invalid packet received

Severity INFO

Description This message indicates that an invalid packet ID was detected during imagedownload.


NN46200-706 01.01 Standard16 June 2008


.



Message ppePoLDownloadImage: malloc failed

Severity INFO

Description This message specifies that the system is out of memory space for an imagedownload.


Message ppePoLFwUpgradeTask: image programming failed

Severity ERROR

Description This message indicates that an image upgrade failed.

Action Reset PoE card using admin disable, re-enable the card, and restart the imageupgrade process again.

Message ppeSetMltPort: Logical Id for MLT <value> not initialized

Severity ERROR

Description This message indicates that an attempted port addition/deletion on an MLTwas not configured in the hardware.

Action Reboot the switch and contact the customer support team if the problempersists

Message ppeSetMltPort: return status = <value> Add = <value> PortNum = <value>

Severity ERROR

Description This message indicates that an addition/deletion of the port to and from theMLT failed during the hardware configuration.

Action The switch maybe usable, but further MLT operations may fail. It isrecommended that you reboot the switch and contact the customer supportteam if the problem persists.

Message pp8kMstPortTxSmTxMstp: out of cpp buffers

Severity Error

Description This message indicates that insufficient system memory prevents the switchfrom transmitting an MSTP BPDU.



NN46200-706 01.01 Standard16 June 2008


.

P Messages 147

Message pp8kRstPortTxSmTxConfig: out of cpp buffers

Severity Error

Description This message indicates that insufficient system memory prevents the switchfrom transmitting RSTP configuration.


Message pp8kMstPortTxSmTxRstp: out of cpp buffers

Severity Error

Description This message indicates that insufficient system memory prevents the switchfrom transmitting an RSTP BPDU, when in MSTP mode.


Message pp8kRstPortTxSmTxTcn: out of cpp buffers

Severity Error

Description This message indicates that insufficient system memory prevents the switchfrom transmitting an RSTP TCN.


Message PreconfigTask Slot <value>: cont_bootp_config request

Severity INFO

Description This message is generated when bootp requests a preconfig task to run thepreconfig.

Action N/A

Message PreconfigTask: card inserted request

Severity INFO

Description This message is generated when a card is inserted from a slot in non-hiddenmode.

Action N/A

Message PreconfigTask: card removed request


NN46200-706 01.01 Standard16 June 2008


.


Severity INFO

Description This message is generated when a card is removed from a slot in non-hiddenmode.

Action N/A

Message PreconfigTask: illegal cont_bootp_config

Severity ERROR

Description This message appears when bootp requests a preconfig task to run thepreconfig and the card is not in the inserted stage.


Message PreConfigTask: PreConfig will be re-tried!!

Severity INFO

Description This message is generated when you specify that PreConfig will be re-tried.

Action N/A

Message PreConfigTask: Slot <value> NO pre-configured

Severity ERROR

Description This message is generated when a slot is not pre-configured due to insufficientMLTs.

Action Free up MLT and re-insert the card.

Message PreconfigTask: waiting for request

Severity INFO

Description This message is generated when a task is waiting for a request to come innon-hidden mode.

Action N/A

Message ProcPendingRefresh <ipaddr> type <value>

Severity ERROR

Description This message is generated if the LSA type is not a hashed type.

Action N/A

Message ProcPendingRefresh: lsid <lsid> type <value>

Severity ERROR

Description This message is generated if an LSA type is summary or external.


NN46200-706 01.01 Standard16 June 2008


.

Q Messages 149


Q MessagesMessage qosHwGetPortDefaultSize: port not present

Severity ERROR

Description This message identifies an application programming error. Specifically, theport is not present.

Action File a bug report.

Message qosHwGetPortDefaultSize: unexpected card type

Severity ERROR

Description This message identifies an application programming error. Specifically, aninvalid card type is present.


Message qosHwGetPortLineRate: port not present

Severity ERROR



Message qosHwGetPortLineRate: unexpected card type

Severity ERROR



Message qosHwGetTxQueueDefaultSize: port not present

Severity ERROR



Message qosHwGetTxQueueDefaultSize: unexpected card type

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.




Message qosInitMap8021pToClassTbl: # of class not in range

Severity ERROR

Description This message identifies an application programming error. Specifically, atraffic class parameter is out of range when passed to the function.


Message qosInitMapClassTo8021pTbl: # of class not in range

Severity ERROR



Message qosInitPolicedMapClassTo8021pTbl: # of class not in range

Severity ERROR



Message qosInitPolicedMapDscpToCosTbl: unexpected CL level

Severity ERROR

Description This message identifies an application programming error. Specifically, theconformance level is not in range.


Message qosPolicyIdxTableInit: indexAlloc failed

Severity FATAL

Description The switch is out of memory and will reboot after the message.


Message qosPolicyIdxTblAdd: - failed adding

Severity ERROR

Description This message indicates that the switch failed to add an entry to the policytable.



NN46200-706 01.01 Standard16 June 2008


.

Q Messages 151

Message qosPolicyIdxTblAdd: index tbl not init

Severity ERROR

Description This message identifies an application programming error. Specifically, thepolicy index table is not initialized.


Message qosPolicyIdxTblFind: index tbl not init

Severity ERROR



Message qosPolicyIdxTblFindNext: index tbl not init

Severity FATAL



Message qosPolicyIdxTblRemove: - failed adding

Severity ERROR

Description This message indicates that an attempt to remove an entry from the policytable failed.


Message qosPolicyIdxTblRemove: index tbl not init

Severity WARNING



Message qosPolicyTblAddEntry: malloc failed Id <value>

Severity WARNING

Description This message indicates that the switch is out of memory.


Message qosShowConfigMapInfo: Out of Memory


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message identifies a driver programming error. Specifically, the switch isout of buffering in show config buffer.


R MessagesMessage rad_callBackResponse unknown request id

Severity ERROR

Description This message identifies an internal error in the software.


Message rad_changeRequestPkt unknown code <> in radius packet

Severity ERROR

Description This message identifies an erroneous code in the header of the receivedRADIUS packet.

Action Verify that the RADIUS server is functioning correctly and then contactcustomer support.

Message rad_changeRequestPkt: unknown code <value> in radius packet

Severity ERROR

Description This message indicates that an unknown packet type is seen when trying tosend a request to the RADIUS server. This message is for debug purposesonly and should not be seen by users.

Action N/A

Message rad_deQPendingRequest cannot find the request for seq_no<num>

Severity ERROR

Description This message indicates that a matching request to the sequence ID in theRADIUS response packet cannot be found.

Action If problem persists contact customer support.

Message rad_enQPendingRequest failed to allocate memory

Severity ERROR



Message rad_extractReplyMessage failed to allocate memory


NN46200-706 01.01 Standard16 June 2008


.

R Messages 153

Severity ERROR

Description This message is generated when the system is out of memory.

Action If the problem persists, contact customer service.

Message rad_handleServerResponse select failed<num>

Severity ERROR

Description This message identifies aninternal error in the software

Action If the problem persists, contactcustomer support.

Message rad_incrIgapEnabledVlanCnt failed toallocate memory

Severity ERROR

Description This message indicates that thesystem is out of memory.

Action If the problem persists, contactcustomer support.

Message rad_NewRequest: no radius serverconfigured

Severity INFO

Description This message indicates that noRADIUS server has been configured.

Action Configure at least one RADIUS server.

Message rad_newSocket cannot bind UDP socketto port<num>

Severity ERROR

Description This message indicates that anattempt to bind to the specified UDP port failed.

Action Ensure that no other UDP service is configured on the same port. If theproblem persists, contact customer support.

Message rad_newSocket cannot create UDP socket

Severity ERROR

Description This message indicates that anattempt to create a UDP socket failed.

Action Contact customer support

Message rad_newSocket failed to allocatememory

Severity ERROR

Description This message indicates that thesystem is out of memory.


Message rad_receiveResponse received responsewith bad length recvd<num>


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message indicates an invalid length for the received RADIUS responsepacket.

Action Verify that the RADIUS server is functioning correctly. If the problem persists,contact customer support.

Message rad_receiveResponse recvfrom failed<num>

Severity ERROR

Description This message indicates that the switch is unable to receive data on the UDPsocket.


Message rad_Request failed to allocate memory

Severity ERROR


Action If the problem persists, contact customer support

Message rad_Request Unknown request type<num>

Severity ERROR

Description This message identifies an internal error in the software.


Message rad_sendRequest unable to send a UDP packet error<num>

Severity ERROR

Description This message indicates that the switch is unable to send a UDP packet.


Message rad_sendRequest unknown code<num> in radius send pkt

Severity ERROR

Description This message identifies an internal mismatch in the software for the RADIUSpacket code.


Message rad_writeLog invalid message size<num>

Severity ERROR

Description This message indicates that the IGAP accounting log message size is invalid.



NN46200-706 01.01 Standard16 June 2008


.

R Messages 155

Message radAcctBuildStopInterimValuePair failed to allocate memory

Severity ERROR



Message radAcctInterim failed to allocate memory

Severity ERROR



Message radAcctOff failed to allocate memory

Severity ERROR



Message radAcctOn failed to allocate memory

Severity ERROR



Message radAcctSendToServer can’t bind UDP socket to port

Severity ERROR

Description This message indicates that an attempt to bind to the specified UDP portfailed.

Action Ensure that no other UDP service is configured on the same port. If problempersists, contact customer support.

Message radAcctSendToServer can’t send data on UDP socket

Severity ERROR

Description This message indicates that the switch is unable to send a UDP packet.


Message radAcctSendToServer cannot open socket

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message indicates the switch is unable to create a UDP socket.


Message radAcctSendToServer failed to allocate memory

Severity ERROR



Message radAcctSendToServer socket recvfrom error

Severity ERROR

Description This message indicates that the switch is unable to receive data on the UDPsocket.


Message radAcctSendToServer socket select error

Severity ERROR



Message radAcctSnmpInterim failed to allocate memory

Severity ERROR

Description This message indicatest that the system is out of memory.


Message radAcctSnmpStart failed to allocate memory

Severity ERROR



Message radAcctSnmpStop failed to allocate memory

Severity ERROR



Message radAcctStart failed to allocate memory

Severity ERROR



NN46200-706 01.01 Standard16 June 2008


.

R Messages 157


Message radAcctStop failed to allocate memory

Severity ERROR



Message radAddEtherHooks Cannot add Input hook

Severity ERROR

Description This message indicates that the switch is unable to initialize the software tocapture login session statistics for use in RADIUS accounting.


Message radAddEtherHooks Cannot add Output hook

Severity ERROR

Description This message indicates that the switch is unable to initialize the software tocapture login session statistics for use in RADIUS accounting.


Message RadAuthNonEapMacAddr: no radius server configured

Severity INFO

Description This message is generated when no radius server is configured while buildingthe authentication request packet for the non-EAP client.

Action Configure the radius server for EAP.

Message radClearStat can’t lock mutex

Severity ERROR

Description This message indicates that the switch is unable to acquire a softwareresource.


Message radCliClearStat: can’t lock mutex!

Severity ERROR

Description This message is generated when the system could not obtain the semaphore.

Action Reboot the switch and contact the Customer Service team if the problempersists.


NN46200-706 01.01 Standard16 June 2008


.


Message radCreateServer Can’t allocate Server Entry

Severity FATAL

Description This message indicates that the switch is unable to create a RADIUS serverdue to memory not being available.


Message radDictAttrGetValue Can’t get value for attribute<string>

Severity ERROR



Message radDictAttrSet Can’t set value for attribute<string>

Severity ERROR



Message radInsertServer can’t lock mutex

Severity ERROR



Message radInsertVp FATAL value pair

Severity ERROR



Message RADIUS authentication failed at <addr> : <msg>

Severity INFO

Description This message indicates that RADIUS authentication failed at server <addr>.Failure reason is given in <msg>.

Action N/A

Message RADIUS authentication failed at<string> s

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.

R Messages 159

Description This message indicates that authentication failed for the specified user on thespecified server.

Action N/A

Message RADIUS server returned invalid mac qos for -- MAC address

Severity WARNING

Description This message is generated when the radius server sends the QoS attribute butwith a invalid MAC QoS value.

Action Check the Radius Server configuration for this client on the radius server.Verify if the QoS value is a valid value.

Message radiusStart Can’t create mutex semaphore

Severity FATAL



Message radLock can’t lock mutex

Severity ERROR



Message radMalloc Can’t allocate memory

Severity ERROR



Message radRemoveServer can’t lock mutex

Severity ERROR



Message radSendServer can’t lock mutex

Severity ERROR



NN46200-706 01.01 Standard16 June 2008


.



Message radSnmpAcctNwData_Add Can’t allocate memory for SNMP Session

Severity ERROR



Message rcBridgePP8300FilterTblSet: indexAdd failed!

Severity ERROR

Description This message indicates that adding a MAC filter failed.

Action N/A

Message rcBridgePP8300FilterTblSet: malloc failed!

Severity ERROR

Description This message indicates that memory allocation failed.

Action N/A

Message rcBridgeStaticMulticastTblSet:can’t take semaphore!

Severity ERROR

Description This message indicates that the semaphore will not add a multicast MACentry.

Action N/A

Message rccExtendAggrNetList failed: no memory

Severity WARNING

Description This message is generated when system is not able to allocate memory fora block of size 1024.


Message rccOspfHelloTimerLink invalid timer value <address>

Severity ERROR

Description This message is generated when an invalid timer is passed to the timer linkingfunction rccOspfHelloTimerLink().


NN46200-706 01.01 Standard16 June 2008


.

R Messages 161





Message rccOspfTimerUnlink invalid timer value <address>

Severity ERROR

Description This message is generated when an invalid timer value is passed to theunlinking function.





Message rcDiagVctTblGetBody: invalid GetOptions <value>

Severity ERROR

Description This message indicates that the option to obtain the result is not correct.

Action N/A

Message rcDiagVctTblSetBody:semGive failed

Severity ERROR

Description This message indicates the process of obtaining the VCT semaphore failed.


Message rcDumpIgmp: rcIpGetIf returns NULL

Severity ERROR

Description This message is generated when the search for the IP interface returns NULL.


Message rcIgmpAccessTblSet : malloc failed

Severity Error

Description A failure to allocate memory for the igmp access record has occurred.



NN46200-706 01.01 Standard16 June 2008


.


Message rcIpAddRoute: route pointer is null.

Severity Fault

Description This message indicates that the system failed to add a route, which causessystem instability.

Action Reboot the switch and contact customer service with the following informationavailable: system logs including any memory dumps, switch configuration,and network topology for further analysis.

Message rcIpAddRoute: ipCircFromId failed for cid %d!

Severity Fault



Message rcIpAddRoute: rcIpAddArp failed with x.x.x.x nh: x.x.x.x cid x

Severity Fault


Action If this fault is caused by a full (16k) system MAC table or a full (3k) systemARP entry table, no action is required.If this fault is not caused by a full MAC table or a full ARP entry table, contactcustomer service with the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message rcIpAddRoute: makeNextHopRouter failed with x.x.x.x nh: x.x.x.x cid x

Severity Fault



Message rcIpAddRoute: addIpRoute failed with x: ipaddr: x.x.x.x mask:x.x.x.x cid %dpRent x

Severity Fault



NN46200-706 01.01 Standard16 June 2008


.

R Messages 163


Message rcIpDeleteRoute: route pointer is null./

Severity Fault

Description This message indicates that the system failed to delete a route, which causessystem instability.


Message rcIpDeleteRoute: ipCircFromId failed for cid %d!/

Severity Fault

Description This message indicates that the system failed to delete a route, which causessystem instability.


Message rcIpModifyNextHop: Arp pointer is NULL for route: x.x.x.x mask: x.

Severity Fault

Description This message indicates that the system failed to update a route, which causessystem instability.


Message rcIpModifyNextHop: trying to replace local route for route: x.x.x.x mask: x.

Severity Fault



Message rcIpModifyNextHop: rcIpAddArp failed with %x

Severity Fault



NN46200-706 01.01 Standard16 June 2008


.


Action If this fault is caused by a full (16k) system MAC table or a full (3k) systemARP entry table, no action is required.If this fault is not caused by a full MAC table or a full ARP entry table, contactcustomer service with the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message rcIpModifyNextHop: makeNextHopRouter failed with x

Severity Fault



Message rcIpModifyNextHop: trying to replace blackhole for route: x mask: x

Severity Fault



Message rcIpModifyNextHop: replaceIpRoute failed with %d for route: x mask: xNextHop x

Severity Fault



Message rcIpStaticRouteTblSet: rcIpLoadRouteRec failed

Severity Fault



Message rcIpLoadRouteRec: unable to allocate a StatRouteRec for IfIndex x


NN46200-706 01.01 Standard16 June 2008


.

R Messages 165

Severity Fault



Message rcIpLoadRouteRec: Adding static route dest=x, mask=x, and next=x failed

Severity Fault



Message rcIpLoadRouteRec: Adding default route, ipAddStaticRoute failed

Severity Fault


Action If this fault is caused by a full (8k) system routing table or unavailable systemmemory, no action is required.If this fault is not caused by a full system routing table or unavailable systemmemory, contact customer service with the following information available:system logs including any memory dumps, switch configuration, and networktopology for further analysis.

Message rcIpAddReplaceStaticRoute: rcIpStaticRouteActive failed

Severity Fault


Action f this fault is caused by a full (8k) system routing table or unavailable systemmemory, no action is required.If this fault is not caused by a full system routing table or unavailable systemmemory, contact customer service with the following information available:system logs including any memory dumps, switch configuration, and networktopology for further analysis.

Message rcIpAddStaticRtsByArp: could not find the specified nexthop

Severity Fault



NN46200-706 01.01 Standard16 June 2008


.



Message rcIpNextHopExists: arpaddUnres returns NULL

Severity Fault



Message rcIpAddMgmtStaticRoute: arpaddUnres returns NULL

Severity Fault



Message rcIpAddMgmtStaticRoute: Couldn’t find the static route that has beensuccessfully added to static route link list.

Severity Fault



Message rcIpProcCreateIpBulkList: unable to create the next hop for Static ARP x.x.x.x!

Severity Fault



Message rcIpPimGlobalGrpSet: Set Pim Static RP

Severity Error

Description This message is generated when an attempt to globally enable or disable PIMStatic RP fails.


NN46200-706 01.01 Standard16 June 2008


.

R Messages 167


Message rcIpPimGlobalGrpSet: Set Pim Glob

Severity Error

Description This message is generated when an attempt to globally set one or more PIMparameter fails.

Action N/A

Message rcIpPimTblSet: set Pim If

Severity Error

Description This message is generated when an attempt to enable or disable PIM on aninterface fails.

Action N/A

Message rcIgmpStat: rcIpGetIf returns NULL

Severity ERROR

Description This message is generated when the search for the IP interface returns NULL.


Message rcIpAddPortToVlan: Bad PortNum <value>

Severity ERROR

Description This message is generated if the port number is out of range of valid values.

Action Provide a valid port number.

Message rcIpAddReplaceStaticRoute: rcIpStaticRouteActive failed

Severity ERROR

Description This message is generated when the static route whose state must bechanged to active is not present.

Action Check the configuration for IP static route entries.

Message rcIpAddRoute: addIpRoute failed with <value>: ipaddr: <ipaddr> mask:<mask> cid <cid>

Severity ERROR

Description This message indicates that an attempt to add the route entry in hardwarefailed.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.


Message rcIpAddRoute: Arp pointer is NULL for route

Severity FATAL

Description This message indicates that while adding an IP route, the ARP pointer isfound to be NULL. This is a Fatal error.

Action Contact customer service and have the following information available:system logs including any memory dumps, switch configuration, and networktopology for further analysis.

Message rcIpAddRoute: ipCircFromId failed for cid

Severity ERROR

Description This message is generated if getting a pointer to the circuit fails.

Action No immediate action required.

Message rcIpAddRoute: rcIpAddArp failed with <value> Status.

Severity ERROR

Description This message is generated if the system is unable to add the ARP entry tothe table.

Action Enter a valid IP and next-hop.

Message rcIpAddRoute: rcIpAddArp failed with <value>: <ipaddr> nh: <nexthop> cid<cid>

Severity ERROR

Description This message specifies a failure to add the ARP entry in hardware.

Action N/A

Message rcIpAddRoute: route pointer is null

Severity ERROR

Description This message is generated when an invalid or null route entry is created inthe CLI for adding an IP route.

Action Provide a valid route entry in the CLI.

Message rcIpAddrTblConsistencyCheck: unable to allocate an IpRec for IfIndex <value>

Severity ERROR

Description This message is generated if the IP record is not a valid entry. It occurs whileperforming the table consistency check.



NN46200-706 01.01 Standard16 June 2008


.

R Messages 169

Message rcIpAddrTblConsistencyCheck: unknown row status <value>

Severity ERROR

Description This message is generated if an invalid row status is encountered during aconsistency check on the table.


Message rcIpAddrTblSet: unable to allocate an IpRec for IfIndex <value>

Severity ERROR

Description This message is generated if the system is unable to find or allocate a newIP record for the provided index. This may be caused by the unavailability ofmemory.

Action Memory exhausted. Contact customer support for further troubleshooting.

Message rcIpAddrTblSet: unable to find an IpRec for ifindex <value>

Severity ERROR

Description This message is generated if an invalid index for a IP record is passed.


Message rcIpAddrTblSet: unknown row status <value>

Severity ERROR

Description This message is generated if an invalid row status is encountered.


Message rcIpAddrTblSet: vlanGetMcastGroupId failed for Vlan <value> IfIndex <value>

Severity ERROR

Description This message is generated if the VLAN is invalid.


Message rcIpAddrTblSynCallBack: unable to allocate an IpRec for IfIndex <value>

Severity ERROR

Description This message is generated when it is unable to allocate an IP record.


Message rcIpAddStaticArp: arpadd failed for failed

Severity ERROR

Description This message is generated if the addition of a static ARP entry in the ARPtable failed.


NN46200-706 01.01 Standard16 June 2008


.



Message rcIpAddStaticArp: ipCircFromIFID failed

Severity ERROR

Description This message is generated when the circuit data is null for a given circuit ID.


Message rcIpAddStaticArpByPort: found an arp while adding the entry

Severity ERROR

Description This message indicates that an existing ARP entry was discovered while tryingto add the static ARP entry with the same IP address.


Message rcIpAddStaticRoute: arpaddUnres returns NULL

Severity FATAL

Description This message is generated if system is not able to locate an entry in theunresolved table.


Message rcIpAddStaticRtsByArp: could not find the specified nexthop

Severity ERROR

Description This message is generated when an ECMP path index for a non-local staticroute is not equal to its maximum value.

Action Check the configuration for the maximum value of the ECMP path index.

Message rcIpArpLock: Can’t take semaphore, rcIpArpLockSemId!

Severity ERROR

Description This message indicates that the software ARP lock could not be accepted.


Message rcIpArpUnlock: semGive failed!

Severity ERROR

Description This message indicates that the software ARP lock could not be accepted.



NN46200-706 01.01 Standard16 June 2008


.

R Messages 171

Message rcIpBootPReply: cppTxFrame failed!

Severity ERROR

Description This message indicates that the switch failed to transmit a bootp relay packet.

Action If this is a frequent occurrence, use trace level 9 3 to capture the CPP tracelevel log and obtain more details about the problem.

Message rcIpConfDhcpTbIGet invalid get option

Severity ERROR

Description This message indicates that a valid SNMP GET is selected.

Action More troubleshooting is required.

Message rcIpConfDhcpTblGet invalid get option %d

Severity ERROR

Description This message is generated when an invalid Get request value is used forretrieving the DHCP record.

Action Review and correct the Get request value.

Message rcIpConfDhcpTblGet invalid Mode %d

Severity ERROR

Description This message is generated when an invalid DHCP record mode value is usedfor retrieving the DHCP record.

Action Review and correct the DHCP record mode value.

Message rcIpDhcpForwardTblGet invalid get option %d

Severity ERROR

Description This message indicates that an invalid Get request option parameter is setin the code.


Message rcIpConfDhcpTbIGet invalid Mode

Severity ERROR

Description This message indicates that an invalid mode is selected.


Message rcIpConfigureCid: ipCircAddIPA failed for <value> on IfIndex <value>

Severity FATAL


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated if the addition of an IP address to a circuit fails.


Message rcIpConfigureCid: ipCircAddIPA failed for on IfIndex

Severity FATAL

Description This message is generated when an attempt to add an IP address to a circuitfails.


Message rcIpConfigureCid: ipCircCreate failed for %s on IfIndex

Severity ERROR

Description This message is generated if the creation of an IP circuit failed.


Message rcIpDelArpByIfIndex: Can’t create <value> task

Severity ERROR

Description This message is generated when an attempt to spawn a task fails.


Message rcIpDelArpByIfIndexAll: Can’t create <value> task

Severity ERROR

Description This message is generated when an attempt to spawn a task fails.


Message rcIpDeleteRoute: route pointer is null

Severity ERROR

Description This message is generated when a pointer to a route entry is invalid or NULL.This occurs when the system tries to delete the IP route entry dynamicallyfrom the table and finds that the pointer passed is NULL.



NN46200-706 01.01 Standard16 June 2008


.

R Messages 173

Message rcIpDeleteStaticArp: unable to find an IpRec for IfIndex

Severity ERROR

Description This message is generated when the delete sequence is initiated for an ARPentry and the search returns NULL.


Message rcIpDeleteStaticArp: unable to find Static Arp Rec for <value> IfIndex

Severity ERROR

Description This message is generated when the delete sequence is initiated for an ARPentry and the search for a static ARP record fails.


Message rcIpDeleteStaticRoute: unable to find Static Route Rec to <value> Next Hop<nexthop>

Severity ERROR

Description This message indicates that the static route to be deleted could not be found.


Message rcIpDhcpForwardTbIGet invalid get option

Severity ERROR

Description This message indicates that an invalid SNMP GET is selected.


Message rcIpDhcpSnoopSendOutFrame: cppTxFrame failed!

Severity Error

Description This message is generated when DHCP packets cannot be sent.

Action Check the system status for a problem with the cpp function.

Message rcIpGetDhcpPortStatsRec: Bad PortNum

Severity ERROR

Description This message indicates that a port number is not within its specified range.

Action Check the configuration for port number minimum and maximum values.

Message rcIpGetDhcpPortStatsRec: unable to allocate a DhcpPortStatsRec forPortNum

Severity ERROR

Description This message indicates failure of memory allocation.


NN46200-706 01.01 Standard16 June 2008


.


Action Close all CLI sessions to free the memory.

Message rcIpGetIcmpInMsgs: m2IcmpGroupInfoGet failed

Severity ERROR

Description This message is generated if the ICMP group information fetching operationfailed while receiving the message.

Action No action required. Contact customer support for further troubleshooting.

Message rcIpGetIcmpOutMsgs: m2IcmpGroupInfoGet failed

Severity ERROR

Description This message is generated if the ICMP group information fetching operationfailed while sending the message.


Message rcIpGetInEchos: m2IcmpGroupInfoGet failed

Severity ERROR

Description This message is generated if the ICMP group information fetching operationfailed while receiving the echoes.


Message rcIpGetInEchosReps: m2IcmpGroupInfoGet failed

Severity ERROR

Description This message is generated if the ICMP group information fetching operationfailed while receiving Inward echoes repetitions.

Action No action required, contact Customer Support for further troubleshooting.

Message rcIpGetOutEchoReps: m2IcmpGroupInfoGet failed

Severity ERROR

Description This message is generated if the ICMP group information fetching operationfailed while sending out the repetition echoes message.

Action No action required, contact Customer Support for further troubleshooting.

Message rcIpGetOutEchos: m2IcmpGroupInfoGet failed

Severity ERROR

Description This message is generated if the ICMP group information fetching operationfailed while sending out the echoes message.



NN46200-706 01.01 Standard16 June 2008


.

R Messages 175

Message rcIpGo: Can’t create rcIp task

Severity FATAL

Description This message is generated when an attempt to start the IP stack’s receive(rcIpTask) task fails.


Message rcIpGo: NPAL_EnableVrId failed

Severity FATAL

Description This message is generated when the system couldn’t create the virtual routerin hardware.


Message rcipIgmpGroupTblEntryAdd: Can’t malloc

Severity ERROR

Description This message is generated when the system is unable to allocate memory forthe IGMP group table entry.


Message rcIpLoadArpRec: unable to allocate a StatArpRec for IfIndex <value>

Severity ERROR

Description This message is generated when the allocation of a static ARP record failsdue to a memory allocation problem.


Message rcIpLock: Can’t take semaphore, rcIpRouteLockSemId

Severity ERROR

Description This message is generated when an attempt to acquire this semaphore fails.


Message rcIpMakeVlanRoutable: ipFindRoute failed for IfIndex <value>

Severity FATAL

Description This message is generated when making the VLAN routable and finding IPfailed.



NN46200-706 01.01 Standard16 June 2008


.


Message rcIpModifyNextHop: Arp pointer is NULL for route: <ipaddr> mask: <mask>

Severity ERROR

Description When adding the route to the hardware, the next-hop information must betogether with the route. This error indicated that there is no software ARPentry associated with the route.


Message rcIpModifyNextHop: rcIpAddArp failed with <value> Status

Severity ERROR

Description This message is generated if the system is unable to add the ARP entry tothe table.

Action Enter valid IP and next-hop.

Message rcIpModifyNextHop: replaceIpRoute failed with <value> for route: <ipaddr>mask: <mask> NextHop <ipaddr>

Severity ERROR

Description This message is generated when an attempt to change the route with the newnext-hop failed in hardware.


Message rcIpModifyNextHop: trying to replace blackhole for route: <ipaddr> mask:<mask>

Severity ERROR

Description Never try to replace the black hole route, but here it indicates it is doing so.You should only delete and add black hole route.

Action N/A

Message rcIpModifyNextHop: trying to replace local route for route: <ipaddr> mask:<mask>

Severity ERROR

Description Never try to replace the local route, but here it indicates it is doing so. Youshould only delete and add local route.

Action N/A

Message rcIpNextHopExists: arpaddUnres returns NULL

Severity FATAL

Description This message is generated when an attempt to locate an ARP entry in theunresolved table fails.


NN46200-706 01.01 Standard16 June 2008


.

R Messages 177


Message rcIpProcessFrame: pP2IpBd!= NULL after call to iprx

Severity ERROR

Description This message is generated if the pointer to buffer for sending the IP packet isnot freed after a call to the IP receiver.

Action Contact customer service for further troubleshooting.

Message rcIpRemovePortFromVlan: Bad Port Number <value>

Severity ERROR

Description This message is generated if the port number is out of range of valid values.

Action Provide a correct and valid port number.

Message rcIpRsmltNodeAdd: no ip record for specified IfIndex <Interface ID>

Severity Error

Description This message indicates that an IP record does not exist for the Interface IDindex obtained by RSMLT when you add an RSMLT Node.

Action Confirm that an IP Interface with that ID index exists. If not, create the indexand disable and enable RSMLT on the IST peer. If this error message stillappears, reboot your chassis. If this error message continues to appear,contact the Nortel Technical Solutions Center for assistance.

Message rcIpRsmltNodeDelete: no ip record for specified IfIndex <Interface ID>

Severity Error

Description This message indicates that an IP record does not exist for the Interface IDindex obtained by RSMLT when you delete an RSMLT Node. This error cancause a memory leak.


Message rcIpRsmltSetPeerRecord: rcv RSMLT msg from IST, but no circuit on IfIndex<Interface ID>

Severity Error

Description This message is generated when RSMLT receives IST messages indicatingthere is an RSMLT Circuit, when none exists.


NN46200-706 01.01 Standard16 June 2008


.



Message rcipRouteIndexAdd() - failed adding <ipaddr>, Mask= <mask>

Severity WARNING

Description This message is generated when adding a new route index failed.

Action N/A

Message rcipRouteIndexRemove() - failed removing <ipaddr>, Mask= <mask>

Severity WARNING

Description This message is generated when removing a route index failed.


Message rcIpRsmltOperTblGet invalid

Severity Error

Description This message is generated when the get operation on rcIpRsmltOperTablereceives an invalid operation parameter.


Message rcIpRsmltPeerTblGet invalid

Severity Error

Description This message is generated when the get operation on rcIpRsmltPeerTablereceives an invalid operation parameter.


Message rcIpRsmltAddMacRecordForPeer: add MacAddress <MAC> failed on MGID<MGID> for IfIndex <Interface Index>

Severity Error

Description This message indicates errors exist when you add an IST peer MAC addressto the FDB table. The switch failed to perform a backup for the IST peer.

Action Confirm RsmltEdgeSupport is enabled on the switch. Reboot the switch torecover the backup function. Contact customer service with the followinginformation available: system logs including any memory dumps, switchconfiguration, and network topology for further analysis.


NN46200-706 01.01 Standard16 June 2008


.

R Messages 179

Message rcIpRxFrame: can’t signal semaphore

Severity FATAL

Description This is due to inability of the system to release the semaphore.


Message rcIpStart: Can’t create cpu and drop next hop!

Severity ERROR

Description This message is generated when the system could not create the two next hopentries in hardware- with one pointing to the CPU and the other to drop.


Message rcIpStart: Can’t create mutual-exclusion semaphore rcIpRouteLockSemId

Severity FATAL

Description This message is generated when an attempt to create a semaphore, used tocontrol re-entry to the routing process, fails.


Message rcIpStaticRouteTblSet: rcIpLoadRouteRec failed

Severity ERROR

Description This message is generated when MIB2 static route table entries are addedand memory is exhausted due to duplicate entries.

Action Increase DRAM size and contact customer support for further troubleshooting.

Message rcIpRsmltForwardingForPeer: Unable to find the Vlan <Vlan ID>. IP RSMLTfeature failed on Macaddr = <MAC Address>

Severity Warning

Description This message indicates that RSMLT failed to find a valid Vlan when backingup IST peer forwarding information.

Action Verify the IST peers have the same Vlan IDs. If this error message continuesto appear, contact customer service with the following information available:system logs including any memory dumps, switch configuration, and networktopology for further analysis.

Message rcIpRsmltTempDefaultRouteAdd: can’t replace one static route


NN46200-706 01.01 Standard16 June 2008


.


Severity Error

Description This message is generated when RSMLT does not replace one of static routeswith the temporary default route.

Action You can continue to operate the chassis, but note the scenario that resultsin the occurrence of this error message. Record the error message andconfiguration, and contact customer service with the following informationavailable: system logs including any memory dumps, switch configuration, andnetwork topology for further analysis.

Message rcIpRsmltTempDefaultRouteAdd: add temporary default route to IST peer <IPAddress> failed

Severity Error

Description This message is generated when RSMLT does not add the temporary defaultroute to the IST peer static route table.

Action You can continue to operate the chassis, but contact customer service withthe following information available: system logs including any memory dumps,switch configuration, and network topology for further analysis.

Message rcIpRsmltTempDefaultRouteDelete: can’t delete temporary default route forvrf <Vrf ID>

Severity Error

Description This message is generated when RSMLT does not delete the temporarydefault route for a VRF instance from the static route table.

Action Delete the RSMLT default route from the static route table and contactcustomer service with the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message rcIpSetEcmp: could not allocate mem for saving delpath

Severity ERROR

Description This message indicates that insufficient memory for the switch to allocate forsaving ECMP delete route paths when you disabled ECMP.

Action Use the show sys per command to check system memory resourceutilization.

Message rcIpStaticRtSyncCallback: unsupported msg type <value>

Severity ERROR

Description This message is generated when an invalid message type is encountered.



NN46200-706 01.01 Standard16 June 2008


.

R Messages 181

Message rcIpSuperNetAddRoute: rarAddIpRoute failed with <value>:<ipaddr> mask:<mask> nh:<ipaddr> pRent <value>

Severity ERROR

Description This message is generated if adding an IP route fails while trying to add asupernet address.


Message rcIpSuperNetAddRoute: rarAddIpRoute failed with <value>:<ipaddr>mask:<ipaddr> nh: <ipaddr>

Severity ERROR

Description This message is generated if adding an IP route fails while trying to add allsupernet addresses.


Message rcIpSuperNetReplaceRoute: rarReplaceIpRoute failed with <value> for route:<ipaddr> mask: <mask> NextHop: <ipaddr>

Severity ERROR

Description This message is generated if replacing an IP route fails while trying to replacea supernet address.


Message rcIpTask: Can’t create <value> message queue

Severity FATAL

Description This message is generated when the rcipTask is unable to create a newmessage queue.

Action Increase the DRAM size and contact customer support for furthertroubleshooting.

Message rcIpTask: Can’t take semaphore

Severity FATAL

Description This message is generated when the semaphore was not available.


Message rcIpVlanSetIpAddress: chAssignMacAddrVlan failed for IfIndex <value>!MacOffset <value>

Severity FATAL


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated if the system is not able to allocate a Mac Addressfor the VLAN. This is a fatal error.

Action Contact customer service and have the following information availablefor further analysis: system logs including any memory dumps, switchconfiguration and network topology.

Message rcIpVlanSetIpAddress: chGetMacAddrVlan failed for IfIndex%d! \nNo macaddress available

Severity WARNING

Description This message is generated if the available pool of MAC Addresses isexhausted.

Action This is a software error. Contact customer service for further troubleshooting.

Message rcIpVlanSetIpAddress: ipCircAddIPA failed for <value> on IfIndex <value>

Severity FATAL

Description This message is generated when an invalid IP record is encountered. Thus,the circuit is not set.


Message rcIpVlanSetIpAddress: ipCircCreate failed for <value> IfIndex <value>

Severity ERROR

Description This message is generated if an IP interface could not be created with thegiven index.

Action This is an internal software error. Contact customer support for furthertroubleshooting.

Message rcIpVlanUp: cppAttach failed for IfIndex <value> cid <value>

Severity FATAL

Description This message is generated when updating VLAN info. It is caused by thefailure to attach the IP record to the vxworks due to either memory beingunavailable, or the maximum number of devices being utilized.


Message rcIpVlanUp: ifAddrSet failed for IfIndex <value> cid <value>

Severity FATAL

Description This message is generated when setting the interface address fails.


NN46200-706 01.01 Standard16 June 2008


.

R Messages 183


Message rcIpVlanUp: ifMaskSet failed for IfIndex <value> cid <value>

Severity FATAL

Description This message is generated when setting the mask for the IP address recordfails.

Action Contact customer service and have the following information availablefor further analysis: system logs including any memory dumps, switchconfiguration and network topology.

Message rcIpGetVrrpRec: Bad IfIndex

Severity Error

Description This message is generated if IfIndex is not within its specified range.

Action Confirm IfIndex configuration.

Message rcIpGetVrrpRec: Bad Vrid

Severity Error

Description This message is generated if Vrid is not within its specified range.

Action Confirm Vrid configuration.

Message rcIpVrrpBecomeBackup: Unable to find the IP Rec for Vrid %d on IfIndex %d

Severity ERROR

Description This message indicates that a Vlan IP record for a VRRP instance is notavailable when a switch is configured as the VRRP backup.

Action Enable the VRRP instance if required.

Message rcIpVrrpBecomeBackup: Unable to find the IP Rec for Vrid ___ on IfIndex ___

Severity Error

Description This message is generated when pointer to a record returns NULL because ofits non-existence.






NN46200-706 01.01 Standard16 June 2008


.


Message rcIpVrrpShutdown: Unknown state %d for Vrid %d on IfIndex %d

Severity ERROR

Description This message is generated when the VRRP instance state checking failsduring a VRRP shutdown.

Action Use the show ip vrrp info vrf <vrfId> command to view the VRRPinstance state. Contact customer service and have the following informationavailable: system logs including any memory dumps, switch configuration, andnetwork topology for further analysis.

Message rcIpVrrpBecomeBackUpMaster: Unable to find the IP Rec for Vrid ___ onIfIndex ___

Severity Error






Message rcIpVrrpBecomeMaster: Unable to find the IP Rec for Vrid %d on IfIndex %d

Severity ERROR

Description This message indicates that a VLAN IP is not available when a switch isconfigured as a VRRP master.

Action Use the show ip vrrp info vrf <vrfId> command to view the VRRPinstance VLAN ID. Enable the VLAN IP interface if required.

Message rcIpVrrpBecomeMaster addVrrpMacAddress failed 1 with Status = %d forIfIndex %d %s

Severity ERROR

Description This message is generated when the switch fails to add a virtual MAC addressto the TAPI layer when the switch is configured as a VRRP master.

Action Confirm that the MAC address exists and can be added to the TAPI layer.Use trace level 56 3 to capture and view the HAL trace log for more errormessages.

Message rcIpVrrpBecomeBackUpMaster: Unable to find the IP Rec for Vrid %d onIfIndex %d

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

R Messages 185

Description This message indicates that a Vlan IP record is not available when a switch isconfigured as the VRRP backup master.


Message rcIpVrrpBecomeBackupMaster: addVrrpMacAddress failed 1 with Status =%d for IfIndex %d %s

Severity ERROR

Description This message is generated when the switch fails to add a virtual MAC addressto the TAPI layer when the switch is configured as a VRRP backup master.

Action Confirm that the MAC address exists and can be added to the TAPI layer.Use trace level 56 3 to capture and view the HAL trace log for more errormessages.

Message rcIpVrrpBecomeMaster rarAddVrrpMacAddress failed with Status __ forIfIndex __

Severity Fatal






Message rcIpVrrpBecomeMaster: Unable to find the IP Rec for Vrid ___ on IfIndex ___

Severity Error






Message rcIpVrrpIn: Misconfigured Advertisment interval ___ for Vrid ___ on IfIndex___, Local adver-int ___

Severity Error


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when advertisement interval is configureddifferently on VRRP routers with the same VRID.

Action Ensure that all the routers with the same VRID have the same advertisementinterval.

Message rcIpVrrpIn: Unknown Vrrp Message Type (%d) for Vrid %d on IfIndex %d

Severity ERROR

Description This message is generated when the switch receives an incorrect VRRPadvertisement message from another network switch.

Action There is no action required. You can ignore this incorrect advertisementmessage.

Message rcIpVrrpIn: Misconfigured Advertisment interval (%d) for Vrid %d on IfIndex%d, Local adver-int %d

Severity ERROR

Description This message indicates that there is a mismatch between a VRRPadvertisement interval received by the switch and the advertisement intervalconfigured for the VRRP instance.

Action Configure the VRRP instance to correct the advertisement interval mismatch.

Message rcIpVrrpIn: Unknown Vrrp Message Type ___ for Vrid ___ on IfIndex ___

Severity Error

Description This message is generated when a Vrrp message is received with incorrectversion and type.

Action Check for a chassis malfunction or a malicious attacker in the subnet.

Message rcIpVrrpIn: VRRP source IP %d.%d.%d.%d equal to VRRP IP, but priority isless than 255 on Vrid %d on IfIndex %d

Severity WARNING

Description This message is generated when an invalid VRRP prority configuration isincluded in a VRRP packet received in an advertisement from another networkswitch. The VRRP address owner sends a VRRP advertisement that is not255.

Action Locate the VRRP address owner switch and correct its VRRP priority and IPconfiguration if required. Disable and enable the VRRP address owner switch.If the error message continues to appear, disable the VRRP instance on thatswitch.

Message rcIpVrrpIn: VRRP source IP ___ equal to VRRP IP, but priority is less than255 on Vrid ___ on IfIndex ___.

Severity Error


NN46200-706 01.01 Standard16 June 2008


.

R Messages 187

Description This message is generated when a Vrrp message is received from the IPowner but the priority is not 255.


Message rcIpVrrpIn: Invalid VRRP source IP %d.%d.%d.%d received for Vrid %d onIfIndex %d, same as local primary IP

Severity WARNING

Description This message is generated when an invalid VRRP source IP address isincluded in a VRRP packet received in an advertisement from another networkswitch.

Action Locate the other switch, correct its VRRP IP configuration if required, anddisable and enable the switch. If the error message continues to appear,disable the VRRP instance on that switch.

Message rcIpVrrpIn: Invalid VRRP source IP ___ received for Vrid ___ on IfIndex ___,same as local primary IP.

Severity Error

Description This message is generated when a Vrrp message is received from a localsource IP.


Message rcIpVrrpBecomeBackupMaster addVrrpMacAddress failed 1 with Status = ___for IfIndex ___

Severity Error

Description This message is generated when pointer to a nonexistent record results in aNULL return.





Message rcIpVrrpBecomeBackupMaster addVrrpMacAddress failed 2 with Status = ___for IfIndex ___

Severity Error

Description This message is generated when pointer to a nonexistent record results in aNULL return.


NN46200-706 01.01 Standard16 June 2008


.






Message rcIpVrrpProcessAdvt: Unknown state %d for Vrid %d on IfIndex %d

Severity ERROR

Description This message indicates that the current VRRP state is not available when theswitch processes received VRRP advertisements.

Action Use the show ip vrrp info vrf <vrfId> command to view the VRRPinstance state.

Message rcIpVrrpProcessAdvt: Unknown state ___ for Vrid ___ on IfIndex ___

Severity Error

Description This message is generated when unknown state has been encountered forVRRP state.





Message rcIpVrrpSendAdvertisement: Unable to find the IP Rec for Vrid %d on IfIndex%d

Severity ERROR

Description This message indicates that the Vlan IP record is not available when theswitch sends a VRRP advertisement.


Message rcIpVrrpSendAdvertisement: Unable to allocate an output buffer for Vrid %don IfIndex %d

Severity ERROR

Description This message is generated when insufficient memory causes the switch to failto assign an output buffer when sending a VRRP advertisement.

Action Use the show sys per command to check system memory resourceutilization.


NN46200-706 01.01 Standard16 June 2008


.

R Messages 189

Message rcIpVrrpSendAdvertisement: Unable to allocate an output buffer for Vrid ___on IfIndex

Severity Error

Description This message is generated when the pointer to the statically allocated VRRPhello buffer is NULL.





Message rcIpVrrpSendAdvertisement: Unable to find the IP Rec for Vrid ___ on IfIndex___

Severity Error

Description This message is generated when the pointer to a nonexistant record resultsin a NULL return.





Message rcIpVrrpShutdown: Unknown state ___ for Vrid ___ on IfIndex ___

Severity Error

Description This message is generated when unknown VRRP state has beenencountered.


Message rcIpVrrpTic: Unknown state %d for Vrid %d on IfIndex %d

Severity ERROR

Description This message is generated when the VRRP tic function returns unknownVRRP state information.

Action Use the show ip vrrp info vrf <vrfId> command to view the VRRPinstance state.

Message rcIpVrrpTic: Unknown state ___ for Vrid ___ on IfIndex ___

Severity Error


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when unknown state has been encountered forVRRP state.





Message rcMcastLoadIfRec: unable to find an IpIfRec for IfIndex <value>

Severity ERROR

Description This message is generated if the interface for multicast is not found becausethe IP record is not found.


Message rcPimScalarsGrpSet

Severity Error

Description An IpRec for cid cannot be located.


Message rcRadiusGlobalGrpSet Unable to spawn tRadAct task

Severity ERROR

Description This message is generated when the system is unable to acquire a softwareresource.

Action Contact customer service.

Message rcRadiusServerTblSet can’t take semaphore

Severity ERROR

Description This message is generated when the system is unable to acquire a softwareresource.

Action Contact customer service.

Message rcVrrpOperTblGet invalid get option ___

Severity Error

Description This message is generated when the SNMP ’get’ option cannot be recognized.


NN46200-706 01.01 Standard16 June 2008


.

R Messages 191





Message rcVrrpRouterStatsTblGet invalid get option

Severity ERROR

Description This message is generated when the VRRP Get request for router statisticsreturns an invalid value.

Action Contact customer service with the following information available: system logsincluding any memory dumps, switch configuration, and network topology forfurther analysis.

Message rcVrrpRouterStatsTblGet invalid get option ___

Severity Error






Message rcVrrpUpdateTimerTask: Can’t alloc VRRP fbuf!!

Severity Error

Description This message is generated when allocation for VRRP frame buffer fails.

Action Close all CLI sessions to free the memory.

Message recieved NULL vlan from SNAS for non-pc client

Severity Fault

Description This message indicates that the system received a VLAN ID of 0 in the MACauthentication message for a non-PC client.

Action Review and confirm NSNAS configuration.

Message Received unknown BOOTP op code

Severity ERROR

Description This message is generated when the system receives some wrong bootpoperating code.


NN46200-706 01.01 Standard16 June 2008


.


Action N/A

Message Redundant Power admin enabled without backup power

Severity ERROR

Description This message is generated when a misconfiguration is detected.

Action N/A

Message Releasing allocated MLTs

Severity INFO

Description This message specifies that allocated MLTs are being released.

Action N/A

Message Remotely authenticated device type <> mac addr <mac addr> ignored.Another device of same type exists on port <port num>.

Severity Warning

Description This message indicates that the system ignores a MAC authenticationmessage because another device of the same type exists on the specifiedport.

Action Review and confirm NSNAS configuration.

Message resetting all I/O cards

Severity INFO

Description This message is generated when, during system boot up, all I/O cards arereset by the master CPU.

Action N/A

Message resetting card

Severity ERROR

Description This message is generated when a card is being reset due to the loss of theIPC connection.


Message Resetting config flag

Severity INFO

Description This message specifies that resetting the config flag is taking place.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

R Messages 193

Message RMON not init before RmonAlarmCreate

Severity WARNING

Description This message indicates that the RMON alarm configuration is not loaded.

Action Reload RMON alarm configuration.

Message RMON not init before RmonEventCreate

Severity WARNING

Description This message indicates that the RMON event configuration is not loaded.

Action Reload RMON event configuration.

Message Rmon not yet started, further RMON config may not be loaded

Severity WARNING

Description This message indicates that the RMON module initialization is delayed whilethe configuration file is loading.

Action Reload RMON related configuration.

Message Route x.x.x.x index N has null next hop pointer.

Severity Fault

Description This message indicates that the system cannot match a policy to a route byusing the next-hop because the next-hop value of the route is 0. This causessystem instability.


Message Route x.x.x.x/x.x.x.x index N has null next hop pointer

Severity Fault

Description This message is generated when the next-hop for a route in a route table is 0,which can be caused by a neighbor router reboot or by a port shutdown.

Action If this fault is caused by a neighbor router reboot or a port shutdown, no actionis required. If either of these is not the reason for the fault, contact customerservice with the following information available: system logs including anymemory dumps, switch configuration, and network topology for furtheranalysis.

Message RstGetTimerPortNum: Invalid timer type

Severity Warning

Description This message is generated when the RST GetTimer function receives aninvalid input parameter for a port..


NN46200-706 01.01 Standard16 June 2008


.



Message RstGetTimerPortNum: NULL pointer

Severity Warning

Description This message is generated when the RstGetTimerPortNum() function receivesa null input parameter.


Message RSTP INFO RSTP Port Role Change (<port or MLT>, <new Port Role>)

Severity Info

Description This message is generated when an RSTP port role changes.


Message rstpmstpTxbpdu: Can’t send frame!

Severity Error

Description This message is generated when the system fails to transmit an RSTP orMSTP BPDU.


Message RSTP INFO New Root (self)

Severity Info

Description This message indicates that the switch you are accessing is the new RSTProot switch.


Message RSTP INFO New Root (<bridge-id of new Root>)

Severity Info

Description This message indicates that the switch you are accessing recognizes thenetwork switch with the specified bridge ID as the new RSTP root switch.


Message RSTP INFO Port Protocol Migration (<port or MLT> <Rstp | StpCompatible>)


NN46200-706 01.01 Standard16 June 2008


.

R Messages 195

Severity Info

Description This message is generated when port BPDUs change from STP to RSTP orfrom RSTP to STP.


Message RSTP INFO OperEdge disabled on port <port or MLT>

Severity Info

Description This message indicates that an RSTP port with edge-port administrativelyenabled receives a BPDU that changes the operational edge-port value tofalse (disabled).


Message RTC and system clock difference is more than 5 seconds. Problem fixed.

Severity WARNING

Description This message is generated when the RTC and system clock difference is morethan 5 seconds.

Action N/A

Message rtmAddAltRouteSortedVrf: invalid ECMP route!

Severity Fault

Description This message is generated when a route other than a static route has analternative route with the same cost value as the best route. This affectssystem stability.


Message rtmModifyRoutePref(), Could not promote alternative route. Possible alternateroute loss

Severity Warning

Description When you modify route type preference the system can upgrade some existingalternative routes to best route. This message indicates that this upgradefailed.

Action Wait for system memory to become available or reboot the chassis. You canopen trace level 45 4 for detailed information about this warning message.

Message rtmDelRoute: could not find static rtrec for x.x.x.x/x.x.x.x.

Severity Fatal

Description This message indicates that when you deleted a static route, the internal routewas corrupted.


NN46200-706 01.01 Standard16 June 2008


.



Message rtmReplaceRoute: unable to allocate a rcForwEnt[x]

Severity Fault

Description This message indicates that there is insufficient system memory to add a newroute or replace an existing route.


Message rtmReplaceRoute: unable to allocate a rcForwEnt

Severity Fault



Message rtmAddRoute cannot do rtm_rtAlloc

Severity Fault



Message rtmAddRoute: unable to allocate a rcForwEnt[0]

Severity Fault



Message rtmAddRoute: failed nhpaddUnres

Severity Fault

Description This message is generated when you add or replace a route, the ARP table isfull and the system cannot learn a new route immediately.


Message rtmModifyRoutePref: VRF_RTM_NODE->rn_routes changed = x/


NN46200-706 01.01 Standard16 June 2008


.

S Messages 197

Severity Fault

Description This message indicates that a statistics error.


Message rtmModifyRoutePref: VRF_RTM_NODE->rn_alt_routes changed = x

Severity Fault

Description This message indicates that a statistics error.


Message rtmReplaceRoute: unable to addUnres

Severity Fault

Description This message is generated when you add or replace a route, the ARP table isfull and the system cannot learn a new route immediately.


Message Rx unsupported arguments: xyz

Severity ERROR


Action N/A

Message Rx: frame truncated from server xyz

Severity ERROR

Description Bad packet was received from specific TACACS+ server.

Action N/A

S MessagesMessage Save config to file <file-name> failed.

Severity INFO

Description This message is generated when the switch is unable to save the PCAPconfiguration.

Action N/A

Message Save config to file <file-name> successful.


NN46200-706 01.01 Standard16 June 2008


.


Severity INFO

Description This message is generated when the PCAP configuration is savedsuccessfully in the slave CPU.

Action N/A

Message Secondary CPU resetting...)

Severity INFO

Description This message is generated when the standby CPU is going to reset shortly.

Action N/A

Message Select failed

Severity WARNING

Description This message is generated when select function call fails.

Action Contact customer service for further troubleshooting.

Message semDelete failed <value>

Severity ERROR

Description This message is generated when the semaphore deletion failed.


Message send_rp_adv_with_zero_holdtime : malloc failed

Severity Error

Description A malloc failure occurred when rp holdtime was sent.


Message SendLSUPacket: invalid circuit

Severity FATAL

Description This message is generated when the system encounters an invalid configurationof the interface when a request to send LSU is made.

Action Contact customer service and have the following information available for furtheranalysis:




Message setDiagMirrorByPort: Failed Id <id>


NN46200-706 01.01 Standard16 June 2008


.

S Messages 199

Severity WARNING

Description This message is generated when the system could not add a mirroring hardwaretable entry because of an incorrect ID or a lack of OS resources.


Message sfInit: remaining Xbar interrupt cause <value> cpldIntCause <value> cannotenable SF interrupt

Severity ERROR

Description This message is generated when the system cannot enable XBAR interrupt.


Message Slot <value> Vlan <value> Rel_Port_Id <value>

Severity INFO

Description This message specifies the slot, VLAN, and release port information for aprevious log message.

Action N/A

Message Slot <value> image download.

Severity WARNING

Description This message is generated when an image download completes during theimage upgrade process.

Action N/A

Message Slot <value> insufficient PoE power resource

Severity INFO

Description This message is generated when there is not enough PoE power available fortarget slot allocation.

Action N/A

Message Slot <value> out of PoE power resource

Severity INFO

Description This message is generated when there is not enough PoE power available fortarget slot allocation.

Action N/A

Message Slot <value> PoE power admin disabled

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when the PoE card power is administrativelydisabled.

Action N/A

Message Slot <value> PoE power admin enabled

Severity INFO

Description This message is generated when the PoE card power is administratively enabled.

Action N/A

Message Slot <value> PoE power allocated

Severity INFO

Description This message is generated when PoE card power is allocated.

Action N/A

Message Slot <value> PoE power removed

Severity INFO

Description This message is generated when the allocated PoE card power is eliminatedafter a hot removal.

Action N/A

Message Slot <value> PoE power usage exceed threshold limit

Severity INFO

Description This message is generated when the PoE card consumed more power than thethreshold set.

Action Monitor the overall power consumption to prevent PoE power overload. Ifnecessary, disable PoE port power administratively.

Message Slot <value> PoE power usage returns below threshold limit

Severity ERROR

Description This message is generated when the PoE card consumes less power than thethreshold set after exceeding it.

Action N/A

Message Slot <value>: <msg>

Severity INFO

Description This message is generated when the system receives boot time information froma different slot.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

S Messages 201

Message Slot <value> cardPN is not programmed

Severity ERROR

Description This message is generated when the card part number is missing in SEEPROM.

Action Replace the card.

Message slot <value> has no PartNumber in SEEPROM.,

Severity WARNING

Description This message is generated when the part number is missing in SEEPROM.

Action Replace card.

Message Slot <value> Xbar has invalid Multicast Table. Failed to rewrite <value> times

Severity ERROR

Description This message is generated when the multicast table on the slave CPUcrossbar is corrupted and cannot be corrected.


Message Slot <value> Xbar has invalid Multicast Table. Failed to rewrite <value> times

Severity FATAL

Description This message is generated when the multicast table on Xbar on the masterCPU is corrupted and cannot be corrected.


Message Slot%d - card not init yet

Severity ERROR

Description This message is generated when card hardware has not yet been fullyinitialized by the chassis.


Message Slot: <value> Current State: <value>

Severity INFO

Description This message is generated when a card is inserted from a slot in non-hiddenmode.

Action N/A

Message Slpp: Can’t create MAC Range Filter!

Severity ERROR

Description This message is generated when the MAC range filter cannot be created.


NN46200-706 01.01 Standard16 June 2008


.


Action Reboot the switch and try again.

Message Slpp: Can’t create slpp polling task!

Severity ERROR

Description This message is generated when the SLPP polling task is not created.


Message Slpp: Can’t create peer MAC Range Filter!

Severity ERROR

Description This message is generated when the peer switch MAC range filter cannot becreated.

Action Check to see if the image versions on the SMLT switch pair are the same.

• If yes, reboot the SMLT pair and try again.

• If no, reconfigure the SMLT switch pair to have the same image versions.

Message Slpp: Can’t remove peer MAC Range Filter!

Severity ERROR

Description This message is generated when the peer switch MAC range filter cannot beremoved.

Action Reboot the switch the SMLT pair and try again

Message slppClearCopSACounter: malloc of message parameter failed

Severity ERROR

Description This message is generated when the allocation of new memory fails.


Message slppRx: SLPP packet was received on Port <port> on VLAN <vlan>, but thepacket is originated on VLAN <vlan> from SRC-Mac <MAC address>

Severity WARNING

Description This message is generated when an SLPP packet is not received on theexpected port or vlan.

Action Verify the vlan and port configuration is correct. There can be network wiringproblems between different vlans.

Message slppRx: SLPP packet received Rx-Vlan <vlan>, Rx-Port <port>, PDU-Vlan<vlan>, SRC-Mac <MAC address>

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.

S Messages 203

Description This message is generated when a SLPP packet is received and thecorresponding ports are shutdown.

Action Verify switch configuration and network wiring. Remove the loop.

Message slppSetCopMacAddress: malloc of message parameter failed

Severity ERROR

Description This message indicates that the allocation of new memory fails.


Message slppTxSlppPdu: Can’t get BD!

Severity ERROR

Description This message is generated when the transmit buffer cannot be located.


Message slppTxSlppPdu: Can’t send frame!

Severity ERROR

Description This message specifies that the transmission of SLPP packet failed.

Action Several SLPP transmission failures do not indicate a serious problem. If thismessage appears continuously, reboot the switch and try again.

Message sltInstrDeleteByPort: can’t lock mutex!

Severity ERROR

Description This message is generated when a semaphore cannot be taken while deletingan SLT port.

Action N/A

Message smltEnable: Can’t set McGrpId!

Severity ERROR

Description This message is generated when an IST multicast group ID cannot be set.

Action N/A

Message smltEnable: Can’t get new mgid

Severity ERROR

Description This message is generated when a new mgid is unavailable while enabling smlt.

Action N/A

Message smltGo: taskSpawn() failed


NN46200-706 01.01 Standard16 June 2008


.


Severity FATAL

Description This message is generated when the start smlt master/slave task has failed.

Action N/A

Message Smlt Id array overflow in Rsmlt Circ on Vlan <Vlan ID>

Severity Error

Description This message is generated when the number of SMLT IDs in a Vlan exceedsthe RSMLT maximum.

Action Confirm the SMLT ID limitations for an RSMLT and decrease the number ofSMLT IDs in the VLAN as required. If this error message continues to appear,contact customer service and have the following information available: systemlogs including any memory dumps, switch configuration, and network topologyfor further analysis.

Message smltProcessMsgs: message too long readLen (Actual Length) maxLen (MaxiumLength) type (message type)

Severity ERROR

Description This message is generated when an oversized SMLT message is received.

Action N/A

Message smlt_port_unlock_timeout_notify: malloc failed!

Severity ERROR

Description This message is generated when a malloc message buffer has failed.


Message smltProcessMsgs: out of resource!

Severity ERROR

Description This message is generated when you cannot malloc memory for the SMLTmessage buffer.


Message smltSendIgmpV3Msg: Can’t alloc buffer

Severity ERROR

Description This message is generated when it is not possible to malloc the message bufferfor SMLT IGMP V3 message.


Message smltSendMsgs: out of resource!


NN46200-706 01.01 Standard16 June 2008


.

S Messages 205

Severity ERROR

Description This message is generated when there is no memory available for allocating anSMLT message buffer.

Action Check memory usage

Message smltStart: Can’t create mutex semaphore!

Severity FATAL

Description This message is generated when a semaphore cannot be created while anSMLT task is starting.

Action N/A

Message smltStgPortDisabled: can’t lock mutex!

Severity ERROR

Description This message is generated when a semaphore cannot be taken while disablingan smlt STG port.

Action NA

Message smltSyncCallback: unsupported version version-number

Severity ERROR

Description This message is generated when only SMLT version 1 is supported.

Action NA

Message smltSyncCallback: Invalid msgType MsgTypeId

Severity Error

Description This message is generated when an unsupported message buffer for smltSynchronization routine is encountered.

Action NA

Message SmltType number is overflow, IfIndex=<Interface Index>, vlan Id=<Vlan ID>,type SMLT, Smlt Id=<Smlt ID>

Severity Error

Description This message is generated when the number of SMLT IDs exceeds the RSMLTmaximum.

Action Confirm the SMLT ID limitations for an RSMLT and decrease the number ofSMLT IDs in the VLAN as required. If this error message continues to appear,contact the Nortel Technical Solutions Center for assistance.


NN46200-706 01.01 Standard16 June 2008


.


Message SmltType number is overflow, IfIndex=<Interface Index>, vlan Id=<Vlan ID>,type SLT, Smlt Id=<Smlt ID>

Severity Error

Description This message is generated when the number of SLT IDs exceeds the RSMLTmaximum.

Action Confirm the SLT ID limitations for an RSMLT and decrease the number of SLTIDs in the VLAN as required. If this error message continues to appear, contactcustomer service with the following information available: system logs includingany memory dumps, switch configuration, and network topology for furtheranalysis.

Message smltUpdateAruMcGroupReg: NPAL_NewMgid failed

Severity ERROR

Description This message is generated when a MG ID is not available when updating theARU MGID register.

Action N/A

Message Socket failed

Severity INFO

Description This message is generated when the system cannot create a new socket.


Message source <src filename> and destination <dst filename>

Severity INFO

Description This message is generated when the source file is <src filename> anddestination file is <dst filename>.

Action N/A

Message ssaFilterCreateModAce: invalid type <Type>

Severity Error

Description This message is generated when an invalid ace type number is encounteredwhen creating a filter for NSNA.

Action Check the corresponding ace.

Message ssaFilterCreateIpACL: rcFilterAclTblSet failed <>.

Severity Fault


NN46200-706 01.01 Standard16 June 2008


.

S Messages 207

Description This message indicates that you did not specify a VLAN filter ID when youconfigured an NSNA VLAN. The system failed to automatically create the filterand the IP ACL table could not be set.

Action Configure the filter manually. If this does not clear the error, contact customerservice and have the following information available: system logs including anymemory dumps, switch configuration, and network topology for further analysis.

Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for DHCP <>.

Severity Fault

Description When you create an NSNA VLAN, the system automatically creates an IP ACLand a non-IP ACL. This message indicates that the system failed to create anACE for the IP ACL.

Action Configure the ACE manually. If this does not clear the error, contact customerservice and have the following information available: system logs including anymemory dumps, switch configuration, and network topology for further analysis.

Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for yellow-subnet <>.

Severity Fault



Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for DNS <>.

Severity Fault



Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for ICMP <>.

Severity Fault




NN46200-706 01.01 Standard16 June 2008


.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for VOIP vid <vlan id> <>.

Severity Fault



Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for HTTP <>.

Severity Fault



Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for HTTPS<>.

Severity Fault



Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for default<>.

Severity Fault



Message ssaFilterCreateIpACL: rcFilterAclTblSet failed <ErrorNum>

Severity Error

Description This message is generated when the acl set has failed.

Action Check the corresponding acl.


NN46200-706 01.01 Standard16 June 2008


.

S Messages 209

Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for DHCP <ErrorNum>

Severity Error

Description This message is generated when AttemptCreate ace of IP acl for DHCP hasfailed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for yellow- subnet<ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl foryellow-subnet has failed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for ICMP <ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl for ICMPhas failed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for DNS <ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl for DNShas failed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for HTTP <ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl for HTTPhas failed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for HTTPS <ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl forHTTPS has failed.



NN46200-706 01.01 Standard16 June 2008


.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for default <ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl for thedefault filter has failed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for VOIP vid <VID><ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl for VoIPVlan <vid> has failed.


Message ssaFilterCreateIpACL: ssaFilterCreateModAce failed for SMB [tcp|udp]:<Portnum> <ErrorNum>

Severity Error

Description This message is generated when an attempt to create an ace of IP acl fortcp/udp port <Portnum> has failed.


Message ssaFilterCreateModAce: invalid type <>.

Severity Fault

Description If you do not specify a filter ID when you configure an NSNA VLAN, the systemautomatically creates a filter. This message indicates that an invalid ACE typewas generated when the system created the filter.

Action Configure the filter manually. If this does not clear the error, contact customerservice and have the following information available: system logs including anymemory dumps, switch configuration, and network topology for further analysis.

Message ssaFilterCreateNonIpACL : rcFilterAclTblSet failed<>.

Severity Fault

Description This message indicates that the system failed to create the default non-IP ACL.

Action Configure the non-IP ACL manually.

Message ssaFilterCreateNonIpACL: ssaFilterCreateModAce failed for tag ARP<>.

Severity Fault

Description This message indicates that the system failed to create an ACE for a non-IPACL.

Action Configure the non-IP ACEs manually.


NN46200-706 01.01 Standard16 June 2008


.

S Messages 211

Message ssaFilterCreateNonIpACL: ssaFilterCreateModAce failed for untag ARP<>.

Severity Fault



Message ssaFilterCreateNonIpACL: ssaFilterCreateModAce failed for default<>.

Severity Fault



Message ssaFilterCreateNonIpACL: rcFilterAclTblSet failed <ErrorNum>

Severity Error

Description This message is generated when an attempt to create a non-IP acl has failed.

Action Check the corresponding acl.

Message ssaFilterCreateNonIpACL: ssaFilterCreateModAce failed for tag arp <ErrorNum>

Severity Error

Description This message is generated when an attempt to create a non-IP acl for tag arphas failed.


Message ssaFilterCreateNonIpACL: ssaFilterCreateModAce failed for untag ARP<ErrorNum>

Severity Error

Description This message is generated when an attempt to create non-IP acl for untag arphas failed.


Message ssaFilterCreateNonIpACL: ssaFilterCreateModAce failed for default <ErrorNum>

Severity Error

Description This message is generated when an attempt to create non-IP acl for defaultfilter has failed.



NN46200-706 01.01 Standard16 June 2008


.


Message ssaPortMovedToVlan port <Slot/Port> moved to vlan <vlanID> with invalid color<color>

Severity Error

Description This message is generated when the vlan color selected to move the port intois invalid.

Action Confirm that the vlan color is in red/yellow/greep/voip.

Message ssaPortMovedToVlan port <x/y> moved to vlan vid> with invalid color <num>.

Severity Fault

Description This message is generated when you move an NSNA port to a VLAN with anNSNA color that is not red, yellow, or green.

Action Verify that the NSNA color for the VLAN is Red, Green, or Yellow.

Message ssaVlanConfigPortBody: Filter Attachment to port <> failed

Severity Fault

Description This message indicates that the system cannot attach a new filter to thespecified port when it receives a ConfigPortExt or ConfigPort message fromNSNAS.

Action Disable and enable NSNA on the port specified in the fault message.

Message SSCP inactivity+statusQuo TimeOut : cleaning up


Description This message indicates that an SSCP connection failed and the system ischanging all NSNA ports to red state.

Action Check the SSCP connection and confirm the NSNAS is accessible.

Message SSCP connection <> with NSNAS IP <ip address>


Description This message indicates that the specified SSCP connection is active.


Message SSCP connection hello interval <> inactivity interval <> status-quo interval <>


Description This message displays SSCP connection parameters.


Message sscp msg type <type> is greater than max number of supported messages<maxnum>


NN46200-706 01.01 Standard16 June 2008


.

S Messages 213

Severity Error

Description This message is generated when the SSCP message type is invalid.

Action Check for a possible mismatch of the ERS8300 and NSNAS versions.

Message sscpProcessMsg : Malloc failed !

Severity Error

Description This message is generated when a failure of malloc memory for the messagehas occurred.


Message sscpProcessMsg : Malloc failed !

Severity Fault

Description This message indicates that there is insufficient memory for the system toallocate to processing SSCP messages.


Message sscpProcessMsg : realloc failed

Severity Error

Description This message is generated when the realloc memory for the message hasfailed.


Message sscpProcessMsg : realloc failed

Severity Fault

Description This message indicates that there is insufficient system memory to process anSSCP message.


Message sscpProcessMsg : Problem while reading data from socket

Severity Fault

Description This message indicates that the system cannot read the message from thesocket.

Action Verify the function of the physical link or socket. If they function properly,disable and enable NSNA globally.

Message SSCP inactivity+statusQuo TimeOut : cleaning up


NN46200-706 01.01 Standard16 June 2008


.


Severity Info

Description This message is generated when the SSCP inactivity+statusQuo has timed out.

Action Check the network connection to NSNAS.

Message sscpProcessMsg : Problem while reading data from socket

Severity Error

Description This message is generated when it is not possible to read from the socket.


Message SSCP connection [Rejected|Accepted|Re-established] with NSNAS IP <IPAddr>

Severity Error

Description This message is generated when the SSCP connection with NSNAS has beenrejected, accepted or re-established.

Action Check the network connection to NSNAS.

Message SSCP connection hello interval <seconds> inactivity interval <seconds>status-quo interval <seconds>

Severity Info

Description This message is generated when the SSCP connection hello interval hasexceeded the allowable inactivity or status-quo intervals.

Action N/A

Message sshd_shutdown_client: failed to send message for session <SessionID>

Severity Error

Description This message is generated when the ssh message is not sent while the clientis shutting down.

Action N/A

Message SSH authentication timeout session <SessionID> from <RemoteIPAddr>

Severity Info

Description This message is generated when SSH authentication has timed out.

Action N/A

Message STG <value> HAS ALREADY BEEN USED

Severity INFO

Description This message is generated when the maximum number of supported STGs hasalready been taken.


NN46200-706 01.01 Standard16 June 2008


.

S Messages 215

Action Change the configuration to free STGs.

Message stg_event_handler: Unrecognized message type %d

Severity Warning

Description This message is generated when the system receives an unrecognized STGmessage type.


Message stgMakePortForwarding: Port %s is already forwarding

Severity Warning

Description This message indicates that the specified STG port is already configured asforwarding.


Message Supported IP addresses is 1 SNAS sent <number of IP> in auth notify message

Severity Error

Description This message is generated when SNAS has sent more than one IP to theswitch.

Action Check the NSNAS server.

Message syncTaskAdd: failed to create <taskId>

Severity ERROR

Description This message is generated when the system fails to create the semaphore.


Message syncTaskAdd: taskVarAdd <value> failed,

Severity ERROR

Description This message is generated when the system fails to add a task variable.


Message syncTaskAdd: taskVarSet <value> <value> semId <value>

Severity ERROR

Description This message is generated when the system fails to set the task variable semId.



NN46200-706 01.01 Standard16 June 2008


.


Message syncTaskDelete: IPC semDelete <value> currentId <value>

Severity FATAL

Description This message is generated when the IPC semaphore semId from the current Idfails.


Message System Arp Table Full

Severity ERROR

Description This message is generated when an entry is about to be added to the ARP tableand there is no empty slot available.

Action Delete unwanted ARP entries from the table.

Message System clock faster than real-time clock. Problem fixed.

Severity ERROR

Description This message is generated when the system clock is faster than a real-timeclock.

Action N/A

Message System out of memory

Severity FATAL



T MessagesMessage Table syncing failed for ntp key entries

Severity ERROR

Description HA-syncing for NTPkey table failed.

Action N/A

Message Table syncing failed for ntp server entries

Severity ERROR

Description HA-syncing for NTP server table failed.

Action N/A

Message TACACS+ authentication failed

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.

T Messages 217

Description TACACS+ authentication failed

Action N/A

Message TACACS+ authentication succeeded

Severity INFO

Description TACACS+ authentication succeeded

Action N/A

Message TACACSG_authenticate_user: failed to send CONTINUE

Severity ERROR


Action N/A

Message TACACSG_authenticate_user: keep server - server not found

Severity ERROR


Action N/A

Message TACACSG_authenticate_user: no user found

Severity ERROR


Action N/A

Message TACACSG_authenticate_user: session not finished

Severity ERROR


Action N/A

Message TACACSG_authorize_user: session not finished

Severity ERROR


Action N/A

Message TACACSG_authorize_user: user not found

Severity ERROR



NN46200-706 01.01 Standard16 June 2008


.


Action N/A

Message TACACSG_conf_message_handler: invalid message type

Severity ERROR

Description Invalid configuration message was received by TACACS+ task.

Action N/A

Message TACACSG_create_user: Cannot get user memory

Severity ERROR

Description Software error - cannot reserve a buffer memory for user.

Action N/A

Message TACACSG_create_user: failed to add user to hash

Severity ERROR

Description Software error - failed to add user info to hash table.

Action N/A

Message TACACSG_delete_user: failed to delete user from hash

Severity ERROR

Description Software error - failed to delete user info from hash table.

Action N/A

Message TACACSG_reset_user: user not found

Severity ERROR

Description Software state mechine error.

Action N/A

Message TACACSP_set_srv: failed to delete server record from hash

Severity ERROR

Description Software error - failed to delete server info from hash table.

Action N/A

Message TACACSP_tcp_create_con: can’t get socket

Severity ERROR

Description Cannot create socket for authenticating with TACACS+.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

T Messages 219

Message TACACSP_tcp_create_con: failed to set ioctl FIONBIO

Severity ERROR

Description Cannot configure socket for authenticating with TACACS+

Action N/A

Message TACACSP_tcp_create_con: failed to set setsockopt SO_REUSEADDR

Severity ERROR

Description Cannot configure socket for authenticating with TACACS+

Action N/A

Message tacacsStart: failed to init TACACS

Severity ERROR

Description Cannot launch TACACS+ application

Action N/A

Message tapiBindPortToDropProfile: Failed, status = <value>

Severity ERROR

Description This message is generated when there is a driver programming error.Specifically, an attempt to bind drop the profile to a port failed.


Message tapiCreateTc: Policy Id <value> doesn’t exist

Severity ERROR

Description This message is generated when there is an application programming error.Specifically, the policy with the specified ID cannot be found.


Message tapiSetDropProfileByClass: Failed, status = <value>

Severity ERROR

Description This message is generated when there is a driver programming error.Specifically, an attempt to bind drop the profile to a Tx queue failed.


Message tapiUpdateTc: Policy Id <value> doesn’t exist

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when there is an application programming error.Specifically, the policy with the specified ID cannot be found.


Message tcLibInit: failed

Severity INFO

Description This message is generated when a policing library initialization fails.

Action Reboot the switch if you want to enable policing.

Message TCP socket to server xyz port xyz, already connected

Severity ERROR

Description TCP socket to server xyz port xyz, already connected

Action N/A

Message tdpInit: Can’t create MAC Range Filter!

Severity ERROR

Description This message is generated when the MAC filter for capturing TDP controlpackets to the CPU is not created.

Action N/A

Message The card in slot -- is resetting. Try the command later.

Severity WARNING

Description This message is generated when a card is in BOOTING state and there is acommand for that card.

Action Try the command after the card is online.

Message The username and the password for standard users are set to default value. Itis highly recommended you change the password once the switch boots up.

Severity ERROR

Description This message is generated when a warning message indicates it is unable toopen the engboot file which store the number of SNMP engines booted.

Action N/A

Message This vlan is also the BPDU vlan for stg <id>. Stg <id> cannot have any othervlans at the presence of vlan <id>

Severity WARNING


NN46200-706 01.01 Standard16 June 2008


.

T Messages 221

Description This message is generated when the VLAN is used to send out tagged BPDUsfor an STG. If the VLAN is created for another purpose, no other VLAN canbe created here.

Action Remove the VLAN from the other STG.

Message traceDumpBkTr: failed to get CP slot number

Severity ERROR

Description This message is generated when the system fails to get the CP slot numberwhen sending trace info from the coprocessor.

Action N/A

Message traceStart: Cannot create CopTraceLockSemId semaphore

Severity FATAL

Description This message is generated when the system cannot create the semaphore.


Message traceStart: malloc failed

Severity FATAL

Description This message is generated when the system runs out of memory.


Message trBmErrorHandler: resetting slot <value>

Severity ERROR

Description This message is generated when there are buffer management errors on agiven slot and the card is being reset to recover from the error condition.

Action N/A

Message trBmErrorHandler: send reset request to secondary CP

Severity ERROR

Description This message is generated when there are buffer management errors on thesecondary CPU and a message is being sent asking it to reset itself.

Action N/A

Message trCardSendTraceCmd: malloc of message parameter failed

Severity ERROR



NN46200-706 01.01 Standard16 June 2008


.



Message trCardSendTraceCmd: malloc of message parameter failed

Severity FATAL



Message trChMsgProc - invalid appModCmd <value>

Severity WARNING

Description This message is generated when an invalid IPC message is received.

Action N/A

Message trChMsgProc - Null message ptr received

Severity INFO

Description This message is generated when an invalid IPC message is received.

Action N/A

Message trCopGo: malloc of message parameter failed

Severity ERROR



Message tree depth <value> should not be zero

Severity INFO

Description This message is generated when the depth of the RTX tree is not zero.

Action No action required, this scenario is correct .

Message trMsgAlloc failed

Severity FATAL

Description This message is generated when the system runs of out memory.


Message trReportBmErrors: devNum= <value>, errType= <value>, errCause= <value>


NN46200-706 01.01 Standard16 June 2008


.

T Messages 223

Severity ERROR

Description This message is generated when there are buffer management errors on agiven device and the error type is being reported.

Action N/A

Message trReportBmErrors: trMsgAlloc failed

Severity ERROR

Description This message is generated when the malloc failed.


Message trSetCopStatusLed: malloc of message parameter failed

Severity ERROR



Message trSetHwPartsDevRev: trMsgAlloc failed

Severity ERROR



Message trTracePrint: malloc failed

Severity ERROR



Message trTraceStart: malloc failed

Severity ERROR

Description This message is generated when the trTraceStart: malloc failed.


Message trXbarUpdateMsgSend: failed to send msg

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when the system fails to send a message to theI/O cards about crossbar insertion removal.


Message trXbarUpdateMsgSend: malloc of message parameter failed

Severity FATAL

Description This message is generated when the system fails to send a message to theI/O cards about crossbar insertion/removal.


Message trXbarUpdateMsgSend: msg is null

Severity FATAL

Description This message is generated when the system fails to send a message to theI/O cards about crossbar insertion/removal.


U MessagesMessage Unable to Allocate memory for log filter entry

Severity INFO

Description This message is generated when the system is unable to allocate memoryfor the log filter entry.

Action N/A

Message Unable to Allocate memory for log filter string

Severity INFO

Description This message is generated when the system is unable to allocate memoryfor the log filter string.

Action N/A

Message unable to create file: <filename>

Severity WARNING

Description This message is generated when the system is unable to open the engboot filewhich stores the number of the booted SNMP engine.

Action N/A

Message unable to create profile semaphore

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.

U Messages 225

Description This message is generated when the system is unable to create binarysemaphore.


Message Unable to find vlan rec for IfIndex n

Severity ERROR

Description This message is generated when a software error occurs.


Message unable to get the IpRec for Addr <ipaddr>

Severity ERROR

Description This message is generated if IP interface cannot be obtained from the IPaddress.


Message Unable to restore port -- to Vlan --

Severity ERROR

Description The system encountered an error while moving the 802.1X controlled portback to its original VLAN after the user session was terminated. When the portreceived 802.1X authentication, it should have been assigned to the VLANreturned by the RADIUS server.


Message Unable to restore port -- to Vlan --

Severity ERROR

Description System encountered error while moving back the 8021x controlled port toit’s original VLAN after the user session is terminated. [ the port shouldhave been assigned to VLAN returned by RADIUS server when it got 8021xauthenticated.]


Message Unable to use any TACACS+ server for authentication

Severity INFO

Description TACACS+ authentication is enabled, but either no server is configured, or noserver accessible, or no server with not valid responses.

Action N/A

Message Unknown Card Type!


NN46200-706 01.01 Standard16 June 2008


.


Severity INFO

Description This message is generated when the card type information is not available.


Message Unknown code in request pkt<num>

Severity ERROR

Description This message is generated when there is an internal mismatch in the softwarefor the RADIUS packet code.


Message unknown IP RSMLT node for IfIndex <Interface ID>

Severity Error

Description This message indicates that the system received an invalid parameter whenRSMLT attempted to transmit a gratuitous ARP.

Action You can continue to operate the chassis, but note the scenario that results in theoccurrence of this error message. Record the error message and configuration,and contact the Nortel Technical Solutions Center for assistance.

Message Unknown message type <value>

Severity Error

Description An unknown type of igmp message is received.

Action N/A

Message unknown speed <value>

Severity ERROR

Description This message is generated when the gprtGetPortSpeed returns an unknownport speed.


Message Unrecognized message type <value>

Severity Warning

Description An unknown type of igmp message is received when an igmp event is handled.

Action N/A

Message UnSupported card type in Slot <value>!

Severity INFO

Description This message is generated when an unsupported card is inserted in the system.

Action Remove card.


NN46200-706 01.01 Standard16 June 2008


.

U Messages 227

Message Unsupported TACACS+ REPLY status (xyz) received: xyz

Severity ERROR


Action N/A

Message Unsupported TACACS+ RESPONSE status (xyz) received xyz

Severity ERROR


Action N/A

Message Updating default vlan for port <Slot/Port> failed

Severity Error

Description This message is generated when an attempt to update a default vlan for a porthas failed.


Message Updating default vlan for port <> failed

Severity Fault

Description This message indicates that the system cannot reset the default VLAN ID for thespecified NSNA port, when you change the NSNA port VLAN membership.

Action Disable and enable the NSNA port.

Message UpdateSumm: gUpdateYieldSh = <address> sfwd = <address>

Severity ERROR

Description This message is generated when a summary lsa is forwarded during a summarylsa update, resulting in the UpdateYield not being equal to sfwd.


Message User -- on Port -- is authenticated

Severity INFO

Description This message is generated when a user has successfully logged in to an 802.1Xcontrolled port.


Message User -- on Port -- is authenticated

Severity INFO


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when a user successfully logs in to a 8021xcontrolled port.


Message User -- on Port -- is disconnected

Severity INFO

Description This message indicates that an 802.1X authorized user logged out.


Message User -- on Port -- is disconnected

Severity INFO

Description This message is generated when an 8021x authorized user logs out.


Message user <UserName> connected from <IP Addr> via rlogin

Severity INFO

Description This message is logged when a user rlogins to the switch.

Action N/A

Message user <UserName> connected from <IP Addr> via telnet

Severity INFO

Description This message is logged when a user telnets to the switch.

Action N/A

Message user <user-name> logged out from console port

Severity INFO

Description This message is generated when the user logs out from a console connection.

Action N/A

Message user connected via console port

Severity INFO

Description This message is logged when a user connects to the switch through the consoleport.

Action N/A

Message user connected via modem port


NN46200-706 01.01 Standard16 June 2008


.

V Messages 229

Severity INFO

Description This message is logged when a user connects to the switch through the modemport.

Action N/A

Message UTAL_LookupProtocolId: gbrgClassperPortSearchProtocolEntry failed

Severity ERROR

Description This message is generated when the system fails to find a Protocol ID record.

Action N/A

V MessagesMessage VCT Task Creation Failed

Severity ERROR

Description This message is generated when creating the VCT task failed.

Action N/A

Message VCT Task Semaphore Creation Failed

Severity ERROR

Description This message is generated when creating the VCT semaphore failed.

Action N/A

Message VCT Test DONE. Get the VCT results for port <portnum>

Severity INFO

Description This message is generated when the process of obtaining the VCT resultsfinished.

Action Get the results.

Message VCT Test FAILED for Port = <portnum>

Severity ERROR

Description This message is generated when the VCT test failed.


Message verify_ospf_packet: auth failure ipa

Severity ERROR

Description This message indicates that the IP address is not authenticated because thekey in the packet does not match the key in the OSPF area.


NN46200-706 01.01 Standard16 June 2008


.


Action Enter a valid key for authentication.

Message VLAN -- returned by RADIUS server for port -- does not exist

Severity ERROR

Description This message indicates that the VLAN returned by the RADIUS server for the802.1X authorized port does not exist on the system.

Action Do one of the following: create the VLAN returned by the RADIUS server orconfigure the RADIUS server to return a valid VLAN.

Message VLAN -- returned by RADIUS server for port -- does not exist

Severity ERROR

Description This message is generated when the VLAN returned by RADIUS server for8021x authorized port does not exist on the system.

Action Either create the VLAN returned by RADIUS server or configure RADIUSserver to return a valid VLAN

Message Vlan id -- returned from RADIUS server cannot be used for port -- belonging toMLT

Severity INFO

Description This message indicates that the system tried to move the 802.1X authorizedport to the VLAN returned by the RADIUS server and the port belongs to anMLT.

Action Remove the port from MLT.

Message Vlan id -- returned from RADIUS server cannot be used for port -- belonging toMLT

Severity INFO

Description This messages is generated when the system tries to move the 8021xauthorized port to VLAN returned by RADIUS server and the port belongs to aMLT

Action Remove the port from MLT

Message Vlan id -- returned from RADIUS server cannot be used for tagged port --

Severity INFO

Description This message indicates that the system tried to move the 802.1X authorizedport to the VLAN returned by the RADIUS server and the port is tagged.

Action Untag the port.

Message Vlan id -- returned from RADIUS server cannot be used for tagged port --


NN46200-706 01.01 Standard16 June 2008


.

V Messages 231

Severity INFO

Description This messages is generated when the system tries to move the 8021xauthorized port to VLAN returned by RADIUS server and the port is tagged.

Action Make the port untagged

Message Vlan Table synch consistency check failed, expected_size:<value>,given_size:<value>\n,868, sizeof(tVlanTblSyncEntry)

Severity INFO

Description This message is generated when the consistency check failed. Receivedmessage size from the Master is different than expected.

Action N/A

Message Vlan Table synch size from master CPU incorrect, expected_size:<size>,given_size: <given size>

Severity ERROR

Description This message is generated when the statistics received from the master aredifferent than expected.

Action N/A

Message vlanCreateVirtualLan: Out of memory! for Vid <value> NumVlans<value>,VlanId,NumVlans

Severity ERROR


Action Free some space.

Message vlanCreateVirtualLan: VLAN Table was damaged!Index <value> vid <value>NumVlans <value>, Index, VlanId, NumVlans

Severity ERROR

Description This message is generated when there is no more Free entries in the VLANtable.

Action Suggests memory corruption.

Message vlanDelMac: malloc failed

Severity ERROR


Action Free up some space.

Message vlanDelMac: msgQSend failed


NN46200-706 01.01 Standard16 June 2008


.


Severity ERROR

Description This message is generated when the VLANMacMsgQid is full.

Action Check to see if messages are dequeued.

Message vlanDelMacTask: unknown type <value>, masg.Type

Severity ERROR

Description This message is generated when the VLAN Del Mac Task has received anunknown message type.

Action Invalid message is received by vlanMacMsgQid.

Message vlanEnableIgmpSnooping: gegrSetVlanUnRegMcFilterCmd FAILED!!

Severity FATAL

Description This message is generated when the vlanUnregisteredMulticastCommand inthe hardware failed.

Action N/A

Message vlanFdbUpdMsg: malloc failed!

Severity ERROR



Message vlanGo: NPAL_DisableAutoAging return fail!

Severity ERROR

Description This message is generated when the disabling of auto aging in the hardwarefailed.

Action N/A

Message vlanGo: NPAL_SetUnregisterMacFilter FAILED!!

Severity ERROR

Description This message is generated when the unregistered MAC filter command in thehardware failed.

Action N/A

Message vlanMacInit: Can’t create mutex semaphore!

Severity FATAL

Description This message is generated when semaphore creation failed.

Action N/A


NN46200-706 01.01 Standard16 June 2008


.

V Messages 233

Message vlanMacInit: indexAlloc failed for pRarMacAddressIndex!

Severity ERROR



Message vlanMacInit: indexAlloc failed for pRarStaticMacAddressIndex!

Severity ERROR


Action Free up memory.

Message vlanMacInit: msgQCreate failed

Severity FATAL

Description This message is generated when there is no memory for message Q.

Action N/A

Message vlanMacInit: taskSpawn failed

Severity FATAL

Description This message is generated when the taskSpawn fails.

Action N/A

Message vlanProcessFrame: cannot send frame

Severity ERROR

Description Control packet could not be sent out.

Action N/A

Message vlanProcessFrame: RSMLT Holdup Forward to Forward state is failed on vlan<VLAN ID>, mac <MAC Address>

Severity Error

Description This message is generated when RSMLT fails to change from hold forwardingstate to forwarding state.

Action Disable and enable RSMLT on the IST peer to restore RSMLT functionality.Contact customer service and have the following information available: systemlogs including any memory dumps, switch configuration, and network topologyfor further analysis.

Message vlanRarAddMltToMgid: failed for MltId <value>\n, MltId

Severity ERROR


NN46200-706 01.01 Standard16 June 2008


.


Description This message is generated when adding an MLT port to vidx fails.

Action N/A

Message vlanStart: Fail to initialize Mac Index List!

Severity FATAL

Description This message is generated when the vlanMacInit fails.

Action N/A

Message vlanSyncCallback: unsupported version <value>

Severity ERROR

Description This message is generated if an unsupported version of the static route isencountered during sync call back.


Message vrrpAssoIpAddrTblGet invalid get option

Severity ERROR

Description This message is generated when the VRRP Get request for an IP addressreturns an invalid value.

Action Contact customer service with the following information available: trace log 153, any memory dumps, switch configuration, and network topology for furtheranalysis.

Message vrrpAssoIpAddrTblGet invalid get option ___

Severity Error


Action Contact customer service and have the following information available forfurther analysis:




Message vrrpOperTblGet invalid get option ___

Severity Error

Description This message is generated when wrong option has been encountered.


NN46200-706 01.01 Standard16 June 2008


.

W Messages 235





Message vrrpRouterStatsTblGet invalid get option ___

Severity Error

Description This message is generated when wrong option has been encountered.





W MessagesMessage WDT TASK: Warning System DRAM usage at <#> percent

Severity WARNING

Description This message is generated when the system DRAM usage reaches athreshold of 95%.

Action N/A

Message write failed to location 0x40018000 on dev <value>

Severity WARNING

Description This message is generated when the write PP register fails.



Severity WARNING




Severity WARNING



NN46200-706 01.01 Standard16 June 2008


.



Message write failed to location 0x4001800c on dev <value>

Severity WARNING



Message Wrong order in received TCP chunks from xyz TACACS+ server

Severity ERROR

Description Bad packet was received from specific TACACS+ server.

Action N/A

Message Wrong logic: Couldn’t find the static route that has been successfully addedto static route linklist.

Severity Fault



Message Wrong state in rcTacacsAuthenticate

Severity ERROR


Action N/A

Message Wrong VRRP adver msg received with auth-type %d for Vrid %d Virtual IP%d.%d.%d.%d

Severity WARNING

Description This message is generated when an invalid VRRP auth-type is included in aVRRP packet received in an advertisement from another switch.

Action Locate the other switch, correct its VRRP auth-type configuration if required,and disable and enable the switch. If the error message continues to appear,disable the VRRP instance on that switch.

Message Wrong VRRP adver msg received with auth-type ___ for Vrid ___ Virtual IP___

Severity Error


NN46200-706 01.01 Standard16 June 2008


.

W Messages 237

Description This message is generated when a Vrrp message is received with an invalidAuthentication type.


Message Wrong VRRP adver msg received with unknown auth-type ___ for Vrid ___Virtual IP ___

Severity Error

Description This message is generated when a Vrrp message is received with anunsupported Authentication type.

Action Check for a different version of VRRP in the subnet.


NN46200-706 01.01 Standard16 June 2008


.



NN46200-706 01.01 Standard16 June 2008


.

239.

Index


NN46200-706 01.01 Standard16 June 2008


.

240


NN46200-706 01.01 Standard16 June 2008


.

Nortel Ethernet Routing Switch 8300

Logs ReferenceCopyright © 2008, Nortel NetworksAll Rights Reserved.

Printed in Canada and the United States of AmericaRelease: 4.1Publication: NN46200-706Document status: StandardDocument revision: 01.01Document release date: 16 June 2008

To provide feedback or to report a problem in this document, go to www.nortel.com/documentfeedback.

www.nortel.com

LEGAL NOTICE

While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed to in writing,NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESSEDOR IMPLIED. The information and/or products described in this document are subject to change without notice.

Nortel, the Nortel logo, the Globemark, and Passport are trademarks of Nortel Networks.

All other trademarks are the property of their respective owners.

ATTENTION

For information about the software license, read "Software license" in this guide.

NN46200-706 01.01 FAULT Logs Reference

Documents

f messages

p messages

d messages

e messages

s messages

q messages

w messages

numeric messages