This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
- Surface protection: Electroplated galvanized, passivated in white-blue or yellow - Filled with lubricant and circle swing agilely without any blocked - Unless otherwise specified, all dimensions are in inches
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Ball Joints QI series
Part # D1 D2 A C F G J L M N P S Min. Pull Test (lb)
- Surface protection: Electroplated galvanized, passivated in white-blue or yellow - Filled with lubricant and circle swing agilely without any blocked - Unless otherwise specified, all dimensions are in inches
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
- Surface protection: Electroplated galvanized, passivated in white-blue or yellow - Filled with lubricant and circle swing agilely without any blocked - Unless otherwise specified, all dimensions are in inches
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
- Surface protection: Electroplated galvanized, passivated in white-blue or yellow - Filled with lubricant and circle swing agilely without any blocked - Unless otherwise specified, all dimensions are in inches
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Ball Joints SQ series
Static load Yield Part # L D M Thread S1 L1 l L2 d1 D2 W d2 M1 M2 l1 d4 Da
- Left hand thread, please add suffix “L”, e.g. LHSA5-RSL - Grease is seals in the boot, high wear resistance - Work Temperature: -40°C-120°C
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Angle Joints DIN 71802
Weight Dimensions mm
Kg/1000pcs for type
d1 d2 I2 I3 e d5 I1 a SW A and AS h9 ±0.3 ±0.3 Min. h11 ±0.2 ±0.3 h14 C and CS
B and BS
4 12.9 8 M5 10.2 9 10.2 5
7.5 22 7 15.2
13.4 4.5 21.3
10 M6 12.5 11 11.5 6 8
25 8 25.2 22.0
5 43.1 13 M8 16.5 13 14 8
10 30 11 53.1
45.0 M10 6 82.3
16 M12
20 16 15.5 10 13
35 13 103.8 86.6
M14x1.5
M14x2 12 181.0
19 M16
28 20 21.5 14 18
45 16 220.9 188.7
- All dimensions are in mm - Notes:
1) A, B, C type without safety clip on the ball socket. AS, BS, CS type with safety clip on the ball socket
2) Left-hand thread in the ball socket possible 3) Spanner surface for type C and CS on the ball stud 4) The manufacturer reserves the right to supply the ball socket with or without spanner surface 5) With or without sealing caps upon request
- Material: 1) Ball stud: Carbon Steel 1045: Housing: Carbon Steel 1020; Clip: Spring Steel 2) Alternative for all angle joint versions: Stainless Steel 304
- Surface protection: Electroplated galvanized, passivated in white-blue or yellow
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
1) Left-hand thread in the ball socket possible 2) The manufacturer reserves the right to supply the ball socket with or without spanner surface 3) With or without sealing caps upon request
- Material: 1) Ball stud: Carbon Steel 1045: Housing: Carbon Steel 1020; Clip: Spring Steel 2) Alternative for all angle joint versions: Stainless Steel 304
- Surface protection: Electroplated galvanized, passivated in white-blue or yellow
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Ball Studs DIN 71803
Dimensions mm Weight
d1 d2 l1 c d3 d5 d6 l2 l3 l4 l5 SW Kg/1000pcs h9 ±0.2 +0.4 h14 h11 -0.4 ±0.3 ±0.3 ±0.3 max. h14 A and C B
4.0 3.9 8 M5
7.5 2 8 5 3 10.2 9 12.5 4 7 4.55
4.4 4.5 7.1
10 M6 8.0
2.2 10 6 4 12.5 11 15.5 4 8 8.5 7.8
5.0 14.2 13 M8
10.0 2.4 13 8 6 16.5 13 18.5 5.3 11 17.7
16.0 M10 6.0 23.5
16 M12 13.0
2.7 16 10 8 20 16 23 7.3 13 35.1 29.6
M14x1.5 M14x2
12.0 56.2 19
M16 18.0 3 19 14 10 28 20 28.5 10.8 16 71.2
63.7
- All dimensions are in mm - Material:
1) Carbon Steel 1045 2) Alternative for all angle joint versions: Stainless Steel 304
- Ball d1 hardness: Min. HRC52: Hardening depth: Min. 1mm - Surface protection: Electroplated galvanized, passivated in white-blue or yellow
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Ball Sockets DIN 71805
a d3 d4 e l1 l2 Weight ±0.3 ±0.5 ±0.5 min. max. ±0.4 Kg/1000pcs for type d1 d2
- All dimensions are in mm - Rod body with right or left-hand female thread. - Outer race lined with bronze liner. - Surface of rod body zinc plated, rod body with a lubricating hole or grease nipple. - For left-hand thread, please add suffix “L”. e.g. PHSL8.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
- All dimensions are in mm - Rod body with right or left-hand female thread. - Outer race lined with bronze liner. - Surface of rod body zinc plated, rod body with a lubricating hole or grease nipple. - For left-hand thread, please add suffix “L”. e.g. POSL8.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Rod Ends SI..T/K series
Load ratings WeightPart # Dimensions mm
kN kg
d d3 B C1 L3 W d2 h1 L4 L5 d4 d5 dk a dyn. stat. 6H min. ≈ C C0
- All dimensions are in mm - Rod body with right or left-hand female thread. - It is made up of a maintenance-free radial spherical plain bearing G..PW and rod body. - Surface of rod body zinc plated. - For left-hand thread, please add suffix “L”. e.g. SIL 16 T/K.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Rod Ends SA..T/K series
Load ratings WeightPart # Dimensions mm
kN kg
d d3 B C1 L1 d2 L7 h L2 dk R1s a dyn. stat. 6g min. min. ≈ C C0
- All dimensions are in mm - Rod body with right or left-hand female thread. - It is made up of a maintenance-free radial spherical plain bearing G..PW and rod body. - Surface of rod body zinc plated. - For left-hand thread, please add suffix “L”. e.g. SAL 16 T/K.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
- All dimensions are in mm - Rod end housing with weldable base and dowel pin. - It is made up of a radial spherical plain bearing GE..ES or GE..ES 2RS and rod end housing. - Rod end housing with a lubricating hole or grease nipple. - Sealed design also available, e.g. GK 50 DO 2RS. - Relubrication not possible for the sizes marked “*”.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
- All dimensions are in mm - Rod end housing with weldable base. - It is made up of a radial spherical plain bearing GE..ES or GE..ES 2RS and rod end housing. - Rod end housing with a lubricating hole or grease nipple. - Sealed design also available, e.g. GF 70 DO 2RS.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
- All dimensions are in mm - Rod end housing with weldable base. - It is made up of a radial spherical plain bearing GE..LO and rod end housing. - Rod end housing with a lubricating hole or grease nipple. - Sealed design also available, e.g. GF 70 LO 2RS.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Rod Ends for Hydraulic Components GIHR..DO series
Part # Dimensions mm Load
ratings kNWeight
kg
d d3 d4 L3 B C1 d2 L7 h1 L4 d5 d1 dk a dyn. stat. 6H min. min. ≈ C C0
- All dimensions are in mm - Rod end housing with right or left-hand female thread. - It is made up of a radial spherical plain bearing GE..ES or GE..ES 2RS and rod end housing. - Rod end housing with a lubricating hole or grease nipple.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Rod Ends for Hydraulic Components GIHR-K..DO series
- All dimensions are in mm - Rod end housing with right or left-hand female thread. - It is made up of a radial spherical plain bearing GE..ES or GE..ES 2RS and rod end housing. - With locking slot and nut. - Rod end housing with a lubricating hole or grease nipple.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Rod Ends for Hydraulic Components GIHN-K..LO series
WeightPart # Dimensions mm
Load ratings kN kg
d B C1 d3 d4 L3 d2 L4 h1 L7 C2 d5 dyn. stat. 6H min. min. C C0
- All dimensions are in mm - Rod end housing with right or left-hand female thread. - It Is made up of a radial spherical plain bearing GE..LO and rod end housing. - With locking slot and nut. - Rod end housing with a lubricating hole or grease nipple. - Relubrication not possible for the size marked “*”.
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
Clevises DIN 71752/ISO 8140 G series
WeightPart # Dimensions mm
kg
d1 g a1 a2 b1 b2 d2 d3 f L1 L2 L3 r 0.3
H9 ±0.5 h11 -0.16 B13 ±0.3 ±0.2 ±0.5 ±0.2
0.3G4x8 4 8 8 8 4 4
0.2M4x0.7 8 0.5 21 16±0.3 6 1 0.005
0.3G4x16 4 16 8 8 4 4
0.2M4x0.7 8 0.5 29 24±0.3 6 1 0.007
0.3G5x10 5 10 10 10 5 5
0.2M5x0.8 9 0.5 26 20±0.3 7.5 1 0.009
0.3G5x20 5 20 10 10 5 5
0.2M5x0.8 9 0.5 36 30±0.3 7.5 1 0.013
0.3G6x12 6 12 12 12 6 6
0.2M6x1.0 10 0.5 31 24±0.3 9 1 0.015
0.3G6x24 6 24 12 12 6 6
0.2M6x1.0 10 0.5 43 36±0.4 9 1 0.021
0.3G8x16 8 16 16 16 8 8
0.2M8x1.25 14 0.5 42 32±0.4 12 1 0.037
0.3G8x16FG 8 16 16 16 8 8
0.2M8x1.0 14 0.5 42 32±0.4 12 1 0.037
0.3G8x32 8 32 16 16 8 8
0.2M8x1.25 14 0.5 58 48±0.4 12 1 0.054
0.3G8x32FG 8 32 16 16 8 8
0.2M8x1.0 14 0.5 58 48±0.4 12 1 0.054
0.3G10x20 10 20 20 20 10 10
0.2M10x1.5 18 0.5 52 40±0.4 15 1 0.074
0.3G10x20FG 10 20 20 20 10 10
0.2M10x1.25 18 0.5 52 40±0.4 15 1 0.074
0.7G10x40 10 40 20 20 10 10
0.2M10x1.5 18 0.5 72 60±0.4 15 1 0.116
0.7G10x40FG 10 40 20 20 10 10
0.2M10x1.25 18 0.5 72 60±0.4 15 1 0.116
0.7G12x24 12 24 24 24 12 12
0.2M12x1.75 20 0.5 62 48±0.4 18 1 0.121
0.7G12x24FG 12 24 24 24 12 12
0.2M12x1.25 20 0.5 62 48±0.4 18 1 0.121
0.7G12x48 12 48 24 24 12 12
0.2M12x1.75 20 0.5 86 72±0.4 18 1 0.175
0.7G12x48FG 12 48 24 24 12 12
0.2M12x1.25 20 0.5 86 72±0.4 18 1 0.175
0.7G14x28 14 28 27 27 14 14
0.2M14x2.0 24 1 72 56±0.4 23 1 0.178
0.7G14x28FG 14 28 27 27 14 14
0.2M14x1.5 24 1 72 56±0.4 23 1 0.178
NINGBO KYLIN MACHINERY CO., LTD.
http://www.ball-joints.com Copyright 2010 Kylin Printed in China Made By Kylin
0.7G14x56 14 56 27 27 14 14
0.2M14x2.0 24 1 101 85±0.4 23 1 0.258
0.7G14x56FG 14 56 27 27 14 14
0.2M14x1.5 24 1 101 85±0.4 23 1 0.258
0.7G16x32 16 32 32 32 16 16
0.2M16x2.0 26 1 83 64±0.4 24 1 0.282
0.7G16x32FG 16 32 32 32 16 16
0.2M16x1.5 26 1 83 64±0.4 24 1 0.282
0.7G16x64 16 64 32 32 16 16
0.2M16x2.0 26 1 115 96±0.4 24 1 0.411
0.7G16x64FG 16 64 32 32 16 16
0.2M16x1.5 26 1 115 96±0.4 24 1 0.411
0.7G18x36 18 36 36 36 18 18
0.2M18x2.5 30 1 94 72±0.4 27 2 0.39
0.7G18x36FG 18 36 36 36 18 18
0.2M18x1.5 30 1 94 72±0.4 27 2 0.39
0.7G20x40 20 40 40 40 20 20
0.2M20x2.5 34 1 105 80±0.4 30 2 0.55
0.7G20x40FG 20 40 40 40 20 20
0.2M20x1.5 34 1 105 80±0.4 30 2 0.55
0.7G20x80 20 80 40 40 20 20
0.2M20x2.5 34 1 145 120±0.4 30 2 0.8
0.7G20x80FG 20 80 40 40 20 20
0.2M20x1.5 34 1 145 120±0.4 30 2 0.8
0.7G25x50 25 50 50 50 25 25
0.2M24x3.0 42 1.5 132 100±0.4 36 2 1.1
0.7G25x50FG 25 50 50 50 25 25
0.2M24x2.0 42 1.5 132 100±0.4 36 2 1.1
0.7G28x56 28 56 55 55 28 28
0.2M27x3.0 48 1.5 148 112±0.4 40 2 1.5
0.7G28x56FG 28 56 55 55 28 28
0.2M27x2.0 48 1.5 148 112±0.4 40 2 1.5
0.7G30x54FG 30 54 55 55 30 30
0.2M27x2.0 48 1.5 148 110±0.4 40 2 1.44
0.7G30x60 30 60 60 60 30 30
0.2M30x3.5 52 1.5 160 120±0.4 42 2 1.97
0.7G30x60FG 30 60 60 60 30 30
0.2M30x2.0 52 1.5 160 120±0.4 42 2 1.97
0.7G35x54FG 35 54 70 70 35 35
0.2M36x2.0 60 2 188 144±0.4 54 3 2.93
0.7G35x72 35 72 70 70 35 35
0.2M36x4.0 60 2 188 144±0.4 54 3 2.93
0.7G35x72FG 35 72 70 70 35 35
0.2M36x2.0 60 2 188 144±0.4 54 3 2.93
0.7G36x72 35 72 70 70 36 36
0.2M36x4.0 60 2 188 144±0.4 54 3 2.93
0.7G36x72FG 35 72 70 70 36 36
0.2M36x2.0 60 2 188 144±0.4 54 3 2.93
0.7G40x84FG 40 84 85 85 40 40
0.2M42x2.0 70 3 232 168±0.4 64 5 5.64
0.7G42x84 42 84 85 85 42 42
0.2M42x4.5 70 3 232 168±0.4 64 5 5.34
0.7G42x84FG 42 84 85 85 42 42
0.2M42x2.0 70 3 232 168±0.4 64 5 5.34
0.7G50x96 50 96 96 96 50 50
0.2M48x5.0 82 3 265 192±0.4 73 5 7.86
0.7G50x96FG 50 96 96 96 50 50
0.2M48x2.0 82 3 265 192±0.4 73 5 7.86
- All dimensions are in mm - Notes:
1) Standard: DIN 71752/DIN ISO 8140 2) Code for thread: regular thread, left-handed—LH; fine-pitch thread—FG; fine-pitch thread, left-handed—FGLH 3) Radius or 45° beveling (at manufacturer's choice)