NICKES INSURANCE - Lighting Plan - A1 copy

DSLO COMPLIANCE SUBMITTAL

A1

NOTES:

-NO INTERIOR LIGHTING FIXTURES SOURCE WILL BE VISIABLE TO ADJCENT PROP-ERTIES -ALL EXTERIOR LIGHTING TO BE INSTALLED WITH TIMER SET TO TURN OFF AT 11PM EXCEPT THE SCONCES. THE WALL SCONCES ARE LESS THAN THE 20% OF TOTAL ALLOWABLE LUMENS FOR THE PROPERTY THAT THE DSLO ALLOWS TO RUN AFTER CURFEW. -THIS PLAN SET IS NOT TO BE USED FOR CONSTRUCTION PLANS AND JLS IS NOT RESPONSIBLE FOR THE INSTALLATION OF THIS LIGHTING CONCEPT NOR THE SAFETY OF ILLUMINATION PROVIDED.

PROJECT:NICKES INSURANCE

616 W HWY. 290DRIPPING SPRINGS, TX 78703

CONCEPTUALLIGHTING DESIGN

DATE REVISION NO.

1” = 20’

3991-C HWY 290 EASTDRIPPING SPRINGS, TX 78620

(512) 894 2004www.jacksonlightingsupply.com

0 5 10 20 40

601

602

599

597

598

580603

583

584

582

586

592 593

591

590589

8'' W

8'' W

8'' W

8'' W

8'' W

8'' W

8'' W8'' W

8'' W

8'' W8'' W

8'' W8'' W

8'' W

6 W

8'' W

SQFT LUMENS / SQFT SITE ALLOWANCE

51,380

13,400

9010

28,970 2.2957 66,506.43

*ENCLOSED INTERIOR SPACES - SEE PLAN*

*SQUARE FOOTAGE PROVIDED IN SUBMITTAL AND VERIFIED USING MEASUREMENTS FROM SITE SURVEY*

ALLOWANCE DESCRIPTION

Square Footage of Total Site

Approximate Area of Site Not Illuminated

Square Footage of Building Footprints

Square Footage of Area to be Illuminated

LUMEN ALLOWANCE CHART:

OTHER NOTES

*SEE SITE SURVEY FOR PROPERTY ACREAGE*

*AREA NOT INTENDED FOR USE OR ILLUMINATED - SEE PLAN*

FIXTURE / LAMP DESCRIPTION SYMBOL KELVIN B-U-G RATING MTG HEIGHT QTY INITIAL LUMENS LOCATIONLIGHT LOSS FACTOR

(LLF) TOTAL LUMENS

Architectural & Site Lighting

Recessed Eave Light - Type 1 3000 N/A 11' 12 1,030 1.00 0.95 11,742.00

Wall Sconce Light - Type 1 3000 N/A 6.5' 14 560 1.00 0.95 7,448.00

Hanging Pendant Light - Type 1 3000 N/A 10' 2 1,970 1.00 0.95 3,743.00

-

-

Landscape Lighting

Tree Downlight - Type 1 3000 N/A 15-35' 8 2,000 1.00 0.95 15,200.00

-

-

38,133.00

38,133.00

66,506.43

DATA COLUMN REFERENCE # 1 2 3 4 5 6 7 8 9 10 11 12

SPECIFIC FIXTURE ID PER PLAN A B C

REFERENCE LOCATION POINT ID PER PLAN P1 P1 P1

DISTANCE FROM FIXTURE TO REFERENCE LOCATION POINT 31 27 20

FIXTURE MOUNTING HEIGHT 10 11 6.5

GROUND ELEVATION AT FIXTURE 1156.5 1156.5 1156.5

GROUND ELEVATION AT REFERENCE LOCATION POINT 1154 1154 1154

VERTICAL HEIGHT ALLOWANCE AT REFERENCE LOCATION POINT PER CITY 4 4 4

RESPECTIVE DIMENSION OF PROPOSED GLARE SHIELD 2 7.5 2.15

REQUIRED DEPTH OF PROPOSED GLARE SHIELD 0.55 2.64 0.54

**LENGTH OR WIDTH MEASUREMENT IS RESPECTIVE TO REFERENCE LOCATION POINT AND FIXTURE ORIENTATION - SEE PLAN FOR FIXTURE ORIENTATION AND GLARE SHIELD DETAIL FOR RESPECTIVE DIMENSION**

LUMINAIRE SCHEDULE - LUMEN COMPLIANCE CHART:

GLARE SHIELD DEPTH COMPLIANCE CHART:

TOTAL SITE ALLOWED INITIAL LUMENS

TOTAL INITIAL LUMINAIRE'S LUMENS

OTHER NOTES

*ALL TREE DOWNLIGHTS TO BE AIMED FOR GLARE COMPLIANCE*

*SEE GLARE SHIELD DETAIL FOR REQUIRED SHIELD DIMENSIONS*

*SEE GLARE SHIELD DETAIL FOR REQUIRED SHIELD DIMENSIONS*

*SEE GLARE SHIELD DETAIL FOR REQUIRED SHIELD DIMENSIONS*

Caretaker QuartersSee Sheet A3 forElevation and Fixture Details

O�cesSee Sheet A2 forElevation and Fixture Details

~8400sqftNON-ILLUMINATED SPACE

~5000sqftNON-ILLUMINATED SPACE

*P1A

BC

DSLO COMPLIANCE SUBMITTAL

A2

PROJECT:NICKES INSURANCE

616 W HWY. 290DRIPPING SPRINGS, TX 78703

CONCEPTUALLIGHTING DESIGN

DATE REVISION NO.

3991-C HWY 290 EASTDRIPPING SPRINGS, TX 78620

(512) 894 2004www.jacksonlightingsupply.com

NOTES:

-NO INTERIOR LIGHTING FIXTURES SOURCE WILL BE VISIABLE TO ADJCENT PROP-ERTIES -ALL EXTERIOR LIGHTING TO BE INSTALLED WITH TIMER SET TO TURN OFF AT 11PM EXCEPT THE SCONCES. THE WALL SCONCES ARE LESS THAN THE 20% OF TOTAL ALLOWABLE LUMENS FOR THE PROPERTY THAT THE DSLO ALLOWS TO RUN AFTER CURFEW. -THIS PLAN SET IS NOT TO BE USED FOR CONSTRUCTION PLANS AND JLS IS NOT RESPONSIBLE FOR THE INSTALLATION OF THIS LIGHTING CONCEPT NOR THE SAFETY OF ILLUMINATION PROVIDED.

WALL SCONCE - TYPE 1 FIXTURE DETAIL

EAVE LIGHT - TYPE 1 FIXTURE DETAIL

HANGING PENDANT - TYPE 1 FIXTURE DETAIL

7.5”EDGE OF LIGHT SOURCETO EDGE OF GLARE SHEILD

2.15”EDGE OF LIGHT SOURCETO EDGE OF GLARE SHEILD

1.95”EDGE OF LIGHT SOURCETO EDGE OF GLARE SHEILD

0.5”DEPTH OF GLARE SHEILD

1.06”DEPTH OF GLARE SHEILD

2.95”DEPTH OF GLARE SHEILD

**6.5’ MOUNTING HEIGHT TYPICAL TO BOTTOM OF GLARE SHEILD**

**11’ MOUNTING HEIGHT TYPICAL TO BOTTOM OF GLARE SHEILD**

**10’ MOUNTING HEIGHT TYPICAL TO BOTTOM OF GLARE SHEILD**

DSLO COMPLIANCE SUBMITTAL

A3

PROJECT:NICKES INSURANCE

616 W HWY. 290DRIPPING SPRINGS, TX 78703

CONCEPTUALLIGHTING DESIGN

DATE REVISION NO.

3991-C HWY 290 EASTDRIPPING SPRINGS, TX 78620

(512) 894 2004www.jacksonlightingsupply.com

NOTES:

-NO INTERIOR LIGHTING FIXTURES SOURCE WILL BE VISIABLE TO ADJCENT PROP-ERTIES -ALL EXTERIOR LIGHTING TO BE INSTALLED WITH TIMER SET TO TURN OFF AT 11PM EXCEPT THE SCONCES. THE WALL SCONCES ARE LESS THAN THE 20% OF TOTAL ALLOWABLE LUMENS FOR THE PROPERTY THAT THE DSLO ALLOWS TO RUN AFTER CURFEW. -THIS PLAN SET IS NOT TO BE USED FOR CONSTRUCTION PLANS AND JLS IS NOT RESPONSIBLE FOR THE INSTALLATION OF THIS LIGHTING CONCEPT NOR THE SAFETY OF ILLUMINATION PROVIDED.

WALL SCONCE - TYPE 1 FIXTURE DETAIL

EAVE LIGHT - TYPE 1 FIXTURE DETAIL

HANGING PENDANT - TYPE 1 FIXTURE DETAIL

7.5”EDGE OF LIGHT SOURCETO EDGE OF GLARE SHEILD

2.15”EDGE OF LIGHT SOURCETO EDGE OF GLARE SHEILD

1.95”EDGE OF LIGHT SOURCETO EDGE OF GLARE SHEILD

0.5”DEPTH OF GLARE SHEILD

1.06”DEPTH OF GLARE SHEILD

2.95”DEPTH OF GLARE SHEILD

**6.5’ MOUNTING HEIGHT TYPICAL TO BOTTOM OF GLARE SHEILD**

**11’ MOUNTING HEIGHT TYPICAL TO BOTTOM OF GLARE SHEILD**

**10’ MOUNTING HEIGHT TYPICAL TO BOTTOM OF GLARE SHEILD**

Fixture Type:

Catalog Number:

Project:

Location:Tesla Pro 3.5"0° - 30° Adjustable Trim Square Model

Beam

Color Temp & CRI

Lumens

CBCP

Finish

HR3LEDT518P F 52° 827 2700K - 80 1100 1358 BN Brushed Nickel

830 3000K - 80 1140 1435 CB Copper Bronze 835 3500K - 80 1230 1550 WT White 840 4000K - 80 1265 1580 927 2700K - 90 990 1258 930 3000K - 90 1030 1303

N 30° 827 2700K - 80 1135 2469 830 3000K - 80 1165 2540 835 3500K - 80 1270 2791 840 4000K - 80 1295 2792 927 2700K - 90 950 2092 930 3000K - 90 1065 2381

S 15° 827 2700K - 80 825 4038 830 3000K - 80 885 4328 835 3500K - 80 900 4378 840 4000K - 80 920 4493 927 2700K - 90 695 3392 930 3000K - 90 630 3071

Example: HR3LEDT518PF827BN

DESCRIPTION

Tesla series is at the pinnacle of where lighting innovation meets energy-efficiency. A high-performance serviceable integrated LED with a state ofthe art light engine delivers incredible maintenance-free optics andperformance ideal for high-end residential and commercial applications.With a wide variety of solid die-cast trims in a multitude of handsomeplated or powder coated finishes, the Tesla collection is sure to enhancestyle and appeal in any space. Tesla PRO provides up to 60% higher lumenoutput over the standard Tesla collection for when more lighting isrequired such as in tall ceiling applications. The trim and LED engine aremanufactured as a single unit with endless amounts of specificationsincluding shape and finish of trim, adjustability, color temperature, andbeam distribution to create the perfect combinations of form, factor, andfunction.

FEATURES

• 30° visual cutoff angle for glare control• 5 year warranty

SPECIFICATIONS

Construction:

Die-cast aluminum construction

Power:

22W

Input:

120-277 VAC, 50/60Hz

Dimming:

ELV: 100-5%, 0-10V: 100-0%

Light Source:

Integrated LED

3 Step Mac Adam Ellipse

Rated Life:

50000 Hours

Mounting:

Heavy gauge retention clips support trimfirmly

Finish:

Electrostatically Powder Coated White,Electroplated Brushed Nickel, ElectroplatedCopper Bronze

Ceiling Thickness:

1/2" - 3/4"

Operating Temp:

-4°F to 104°F (-20°C to 40°C)

Standards:

ETL, cETL, Damp Location Listed

FINISHES

BrushedNickel

CopperBronze

White

LINE DRAWING

waclighting.com | Phone (800) 526.2588 | Fax (800) 526.2585 | Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050

1WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. November 2019

EAVE LIGHT - TYPE 1

Fixture Type:

Catalog Number:

Project:

Location:Tesla 3.5"New Construction Housing IC Airtight Model & Product

HR3LED-H18D1 Tesla 3.5in LED IC-Rated Airtight Narrow New Construction Housing

Example: HR-3LED-H18D1-ICA

DESCRIPTION

Tesla series is at the pinnacle of where lighting innovation meets energy-efficiency. A high-performance serviceable integrated LED with a state ofthe art light engine delivers incredible maintenance-free optics andperformance ideal for high-end residential and commercial applications.With a wide variety of solid die-cast trims in a multitude of handsomeplated or powder coated finishes, the Tesla collection is sure to enhancestyle and appeal in any space. Tesla PRO provides up to 60% higher lumenoutput over the standard Tesla collection for when more lighting isrequired such as in tall ceiling applications. The trim and LED engine aremanufactured as a single unit with endless amounts of specificationsincluding shape and finish of trim, adjustability, color temperature, andbeam distribution to create the perfect combinations of form, factor, andfunction.

FEATURES

• Tesla 3.5in LED IC-Rated Airtight Narrow New Construction Housing• The Tesla series is engineered with state of the art high output LEDtechnology for optimal thermal management and heat dissipation• Driver concealed within the fixture• 5 year warranty

SPECIFICATIONS

Construction:

20 Gauge cold rolled steel

Power:

21.5W

Input:

120-277 VAC, 50/60Hz

Dimming:

ELV: 100-5%, 0-10V: 100-0%

Mounting:

Heavy gauge retention clips secures housingfirmly to ceiling

Cut Out:

4 5/8"

Ceiling Thickness:

1/2" - 3/4"

Operating Temp:

-4°F to 104°F (-20°C to 40°C)

Standards:

ETL, cETL, IC, Airtight

LINE DRAWING

waclighting.com | Phone (800) 526.2588 | Fax (800) 526.2585 | Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050

2WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. November 2019

EAVE LIGHT - TYPE 1

Fixture Type:

Catalog Number:

Project:

Location:SodorOutdoor Wall Sconce 3000K Model & Size

Color Temp & CRI

Finish

Watt

LED Lumens

Delivered Lumens

Title 24

WS-W15710 10" 3000K 90 BK Black 15W 1200 484 Yes3000K 90 BZ Bronze 11.5W 1200 560 No3000K 90 GH Graphite 11.5W 1200 560 No

Example: WS-W15710-BK

DESCRIPTION

A Steam work inspired approach to a traditional lantern design. Sodor isconstructed with a solid die-cast aluminum shade that provides fantasticglare cutoff and a weather resistant powder coated finish. The light engineis factory sealed for maximum protection against the harshest elements.

FEATURES

• Weather resistant powder coated finishes• Light engine is factory sealed for maximum protection from the elements• Heavy aluminum shade provides great glare cutoff• Title 24 may not be available for all finishes, check for availability• ACLED driverless technology• 5 year warranty

SPECIFICATIONS

Color Temp:

3000K

Input:

120 VAC, 50/60Hz

CRI:

90

Dimming:

ELV: 100 - 10%

Rated Life:

54000 Hours

Standards:

ETL, cETL, IP65, Title 24 JA8-2016 Compliant,Dark Sky Friendly

Wet Location Listed

Construction:

Aluminum hardware with glass diffuser

FINISHES

Black Bronze Graphite

LINE DRAWING

Powered by TCPDF (www.tcpdf.org)

waclighting.com | Phone (800) 526.2588 | Fax (800) 526.2585 | Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050

2WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. November 2019

WALL SCONCE- TYPE 1

Fixture Type:

Catalog Number:

Project:

Location:

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPT 2019

waclighting.comPhone (800) 526.2588Fax (800) 526.2585

Headquarters/Eastern Distribution Center44 Harbor Park Drive Port Washington, NY 11050

Central Distribution Center1600 Distribution CtLithia Springs, GA 30122

Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760

TUBE ARCHITECTURAL DS-PD05LED Pendant Mounts

ORDERING NUMBER

Diameter Watt BeamBeam Angle Color Temp CRI Lumen CBCP

Efficacy(Lm/W) Light Distribution Finish

DS-PD05 5” 25W

SSpot

16°

92727930303540

2700K2700K3000K3000K3500K4000K

BKWTBZGH

BlackWhiteBronzeGraphite

NNarrow

25°

92727930303540

2700K2700K3000K3000K3500K4000K

FFlood

33°

92727930303540

2700K2700K3000K3000K3500K4000K

PRODUCT DESCRIPTION

The latest energy efficient LED technology in an appealing cylindrical profile delivers accent lighting. Comes in various light beam angle options.

FEATURES

• High performance exterior rated LED pendant• Includes 45° swivel canopy and 2 field cuttable 24" rods• Solid aluminum construction• 39° visual cutoff angle for glare control• 5 year warranty

SPECIFICATIONS

Input: Dimming:

Light Source:

Finish:

Standards:

Operating Temp:

Universal voltage 120V - 277VAC, 50/60Hz Electronic low voltage (ELV) : 100% - 5% 0-10V: 100% - 1% High output 3 Step Mac Adam Ellipse COBRated life of 60,000 hours at L70Electrostatically powder coated, white, black, bronzeand graphiteIP65 rated, ETL & cETL wet location listed,Energy Star® 2.2 rated Title 24 JA8-2016 Compliant -13°F to 122°F (-25°C to 50°C)

DS-PD05-_____-___

Example: DS-PD05-S930-WT

24" Extension rod for additional

length up to 96"

+

DS-PDX24

Seismic swivel tilts up to 45° to accomodate sloped ceiling

5"

6D"

4D"

2" - 48"S"

@"

45°

908590858585

908590858585

908590858585

18252190 1895 2300 2350 2375

1005012057 10427126441293713062

738876929495

16°

18102170188022752330 2350

52806335 5478 664367976863

728775919394

25°

190022801970239024452470

451554174685568158125870

769179969899

33°

DS-PD0517 5” 17W

1Reference output shows 25W output. Multiply by 0.7 to determine output for 17W combinations.

Reference Output 1

HANGING PENDANT - TYPE 1

www.waclighting.com4

MOONL IGHT ING EFFECT

GRAND ACCENT 740 -2000 LUMENS

• New 4000K Color Temperature option resembles moonlight• Adjustable beam 15° to 60°• Continuously adjustable lumen output 740–2000 lm

Introducing the latest addition to our family of landscape accent lights, now with even more

light output. When mounted high in trees and pointing downward, Grand Accent creates

a beautiful moonlighting effect with a cool white light and superior lumen output.

Mounting stake anddirect burial gel filled wire nuts Included

Input:Power:Lumens:Beam Angle:CRI:Rated Life:

9 -15VAC15W to 35W / 21VA -44VA740 lm to 2000 lm15° to 60°8545,000 hours

12V• Integral brightness control• Adjustable beam angle 15°–60°• One fixture replaces 50W to 100W

halogen accent light• Transformer required (sold separately)

2700K Warm White

5211-27BZ5211-27BK

Bronze on Aluminum Black on Aluminum

3000K Pure White

5211-30BZ5211-30BK

Bronze on Aluminum Black on Aluminum

4000K Cool White

5211-40BZ5211-40BK

Bronze on Aluminum Black on Aluminum

Color Temperature

74"

Ø3b" 84"

Accessories For Grand Accent

Grand Accent Snoot 5211-SNOOT-BZ5211-SNOOT-BK

Bronze on AluminumBlack on Aluminum

6” Long Shroud 5211-LSHR-BZ5211-LSHR-BK

Bronze on AluminumBlack on Aluminum

Optics LENS-25-AMBLENS-25-GRNLENS-25-RED

AmberGreenRed

LENS-25-BLULENS-25-FR

BlueFrosted

1838 listed (12V)New

TREE DOWNLIGHT - TYPE 1