NH-5 Ser The NH-5 Serial Bus Expander data connection. The NH-5 de regular PWM signal for until fu high-current Power Hub (Pow Use and Features: • Easy implementing, Plug • Compatible to all Robbe • Future-proof!!! An addit • 16BIT, 80Mhz RISC CPU ( • Super „Low-Latency“, Re • 15ms Framerate (Servo U • 11Bit Servo-resolution (F • IPB Impulse Booster, inte Servos are supplied with • Enhancement for receive • Sbus, Sbus2 Loop Port • Small, light, also fits in sm • German and English Man • Made in Germany rial Bus Expander Power Hu r is compatible to Robbe/ Futaba Sbus2 and S ecodes the serial Sbus/Sbus2 signals and prov urther 5 servos. Simultaneously the NH-5 ser wer distributor). Firmware Version 1.0 g and Play! Futaba Sbus and Sbus2 Receiver tional Software Upgrade is possible afterwards (N (fast converting of Servo data) NanoWatt-Techno eal-time-output of the servo-values Update Rate) Futaba Specification) egrated Servo impulse-amplifier for all 5 outputs h high current (High Power / High Current Hub) er R7003SB, R7008SB for 5 additional PWM Servo maller models nual ub Sbus serial Servo- vides those as rves a high-voltage, New Features) ology s o-channels
2
Embed
NH-5 Serial Bus Expander Power Hub - CB Elektronics · NH-5 Serial Bus Expander Power Hub The NH-5 Serial Bus Expander is compatible to Robbe/ Futaba Sbus2 and Sbus serial Servo data
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NH-5 Serial Bus Expander Power Hub
The NH-5 Serial Bus Expander is compatible to Robbe/ Futaba Sbus2 and Sbus serial Servo
data connection. The NH-5 decodes the serial Sbus/Sbus2 signals
regular PWM signal for until further 5
high-current Power Hub (Power distributor)
Use and Features:
• Easy implementing, Plug and Play!
• Compatible to all Robbe Futaba Sbus and Sbus2 Receiver
• Future-proof!!! An additional Software Upgrade is possible afterwards (New Features)
• 16BIT, 80Mhz RISC CPU (fast converting of Servo data)
• Super „Low-Latency“, Real
• 15ms Framerate (Servo Update Rate)
• 11Bit Servo-resolution (Futaba Specification)
• IPB Impulse Booster, integrated Servo impulse
Servos are supplied with high current
• Enhancement for receiver R7003SB, R7008SB f
• Sbus, Sbus2 Loop Port
• Small, light, also fits in smaller models
• German and English Manual
• Made in Germany
5 Serial Bus Expander Power Hub
5 Serial Bus Expander is compatible to Robbe/ Futaba Sbus2 and Sbus serial Servo
5 decodes the serial Sbus/Sbus2 signals and provides those as
M signal for until further 5 servos. Simultaneously the NH-5 serves a high
current Power Hub (Power distributor).
Firmware Version 1.0
Plug and Play!
Compatible to all Robbe Futaba Sbus and Sbus2 Receiver
additional Software Upgrade is possible afterwards (New Features)
16BIT, 80Mhz RISC CPU (fast converting of Servo data) NanoWatt-Technology
Latency“, Real-time-output of the servo-values
15ms Framerate (Servo Update Rate)
(Futaba Specification)
IPB Impulse Booster, integrated Servo impulse-amplifier for all 5 outputs
Servos are supplied with high current (High Power / High Current Hub)
Enhancement for receiver R7003SB, R7008SB for 5 additional PWM Servo
ight, also fits in smaller models
German and English Manual
5 Serial Bus Expander Power Hub
5 Serial Bus Expander is compatible to Robbe/ Futaba Sbus2 and Sbus serial Servo-
and provides those as
5 serves a high-voltage,
additional Software Upgrade is possible afterwards (New Features)
Technology
amplifier for all 5 outputs
M Servo-channels
Specifications:
NH-5 Serial Expander / Power Hub
Input voltage 4.2 - 9,0Volt
Resolution 11Bit / 2048 Steps
Permitted Servo current per servo output Max. 3A
Save of Setup Templates/Servo Out Yes intern EE-Prom
Framerate 15ms
Startup-time 1sec.
Optical signalization Bus Transmission Yes
Sbus und Sbus2 compatible Yes
Measurements B x L x D in mm over all 37 x 54 x 11