This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
53
NF C
onnectors
53
NF Connectors
pages
Latch Header (1.27mm) Right Angle, Solder Dip 54-55
Latch Header (1.27mm) Straight, Solder Dip 56-57
Latch Header (1.27mm) Straight, Solder Dip 58-59
Box Header (1.27mm) Right Angle, Solder Dip 60-61
Box Header (1.27mm) Straight, Solder Dip 62-63
IDC Connectors (1.27mm) Transition Header 64-65
IDC Connectors (1.27mm) IDC Receptacle 66-67
Board to Board Recep. (1.27mm) Through Hole 68-69
Latch Header (1.27mm, Right Angle, Solder Dip)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-01 * 2- * -**Header Series
No. of Positions
Terminal Type:2: Right Angle Solder Dip
Blank: 2.7 mm Terminal1: 4.6 mm Terminal
Plating (see below)
1: Short Latch2: Long Latch
Standard Header
CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C
Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features1. Right-angle terminals2. Short or long latches 3. Long terminal available4. Variety of plating options5. Latches eject receptacle6. Central polarizing key
54
❑ Short Latch
Positions 50, 60, 64, 80,100 available in long terminals† Long Latch
Positions 40, 64, 80, 100 available in long terminals
10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 ContactsNote: Left half of this PCB layout is identical to Section ASection A Section B
56
Latch Header (1.27mm, Straight, Solder Dip)
NFP SERIES
ORDERING INFORMATION
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-01 * 4- * -**Header Series
No. of Positions
Terminal Type:4: Straight Solder Dip
Blank: 2.7 mm Terminal1: 4.6 mm Terminal
Plating (see below)
1: Short Latch2: Long Latch
Standard Header
CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C
Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features1. Straight terminals2. Short or long latches 3. Long terminal available4. Variety of plating options5. Spring pin for secure mount6. Latches eject receptacle7. Central polarizing key
❑ Short Latch
Positions 26, 34, 40, 50, 80,100 available in long terminals† Long latch
10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 ContactsNote: Left half of this PCB layout is identical to Section ASection A Section B
58
Latch Header (1.27mm, Straight Solder Dip)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-03 * 4- * -**Header Series
No. of Positions
Terminal Type:4: Straight Solder Dip
Blank: 2.7 mm Terminal1: 4.6 mm Terminal
Plating (see below)
1: Short Latch2: Long Latch
Without Spring Pin Mount
CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C
Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features1. Straight terminals2. Short or long latches 3. Variety of plating options4. Long terminal available5. Latches eject receptacle6. Central polarizing key
❑ Short Latch
Positions 10, 50, 60, 80,100 available in long terminals† Long Latch