MM_INNO2012 New ways of induction heating in the injection moulding process Dipl.-Ing. M. Maier Prof. Dr.-Ing. W. Schinköthe Universität Stuttgart Institut für Konstruktion und Fertigung in der Feinwerktechnik (IKFF) Micro Technology iNNOVATION fORUM Villingen-Schwenningen February 29, 2012
14
Embed
New ways of induction heating in the injection moulding ... · New ways of induction heating in the injection moulding process ... Induction heating Principle ......
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MM
_IN
NO
201
2
New ways of induction heatingin the injection moulding process
Dipl.-Ing. M. Maier
Prof. Dr.-Ing. W. Schinköthe
Universität Stuttgart
Institut für Konstruktion und Fertigung in der Feinwerktechnik (IKFF)
Micro Technology
iNNOVATION fORUM
Villingen-Schwenningen
February 29, 2012
MM
_IN
NO
201
2
Agenda
2012-02 / M. Maier 2
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
• About us
• Variothermal process control
• Induction heating in plastics processing
Focus: Ceramics in injection moulding tools
• Details, trivia and preview on future applications
MM
_IN
NO
201
2
Actuators
Piezoelectrical Ultrasonic MotorsLinear and Rotatory Travelling Wave Actuators
Electrodynamic ActuatorsLinear Direct DrivesSmall Scale Actuators with Moving Magnets
DesignMethodology
Construction and Design using 2D- and 3D-CAD
FEM Simulation
Rheological Simulations
Coupled Field Simulationselectro-magneticelectro-magnetic-thermalpiezoelectric-dynamic
Metrology and Verification
Reliability of Small Scale Actuators
PrecisionInjection Molding
Moulded Components Design and Construction
Tool Design and Construction
Variothermal Process Control by Inductive Heating
Injection Moulding of Small Scale Parts
Polymer Bound Magnets
Optical and Mechanical Sensors
Non-Contact Distance Sensors
Surface Measuring Sensor
Thickness Measurement Sensor
2012-02 / M. Maier 3
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
MM
_IN
NO
201
2
Wkz M
Wkz M Wkz M
Wkz M
Polymer melt
Solidified melt
Polymer melt
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
2012-02 / M. Maier 4
Isothermal process control Variothermal process control
Variotherm mould temperature control
Constant mould temperature Time-varying mould temperature
MM
_IN
NO
201
2
Induction heating
Principle
• Electric transformer:
„short circuit on secondary side“
eddy currents
• AC generated high-frequency
electromagnetic field
2012-02 / M. Maier 5
Alternating
magnetic field
Induced
eddy currents
in surface
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
MM
_IN
NO
201
2
6
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
Mould-integrated induction heating
2012-02 / M. Maier
watercooledcopper inductor
conventional heat-balancing system
Dynamic mould temperature by thermal conduction:
induction heating provides high heat flux
due to its surpassing power density
MM
_IN
NO
201
2
7
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
Use of ceramics as insulatingmaterial: ceramic potting compound
2012-02 / M. Maier
watercooledinductor
ceramic potting compoundfor electric insulation and inductor reinforcement
mould plate (schematic)
Separate channels for
mould cooling needed
conflict:
mould stiffness
vs.
thermal dynamics
Example: mould for fuel cell bipolar plates
Joint lines withoutinduction
Use of ceramics as insulatingmaterial: ceramic potting compound
2012-02 / M. Maier 8
MM
_IN
NO
201
2
9
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
Use of ceramics as insulatingmaterial: ceramic coating
Example:
2012-02 / M. Maier
pulsed, close-to-contourcooling
mould plate (schematic)
permanentlywatercooledcopperinductor
ceramic coating
Same channels for
inductor and mould
cooling
improved mould stiffness
and
thermal dynamics
(both heating and cooling)
MM
_IN
NO
201
2
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart
102012-02 / M. Maier
Dimacer® : ceramics for injection moulding toolsmachinable high performance ceramics
Ceramic gate insert(eroded)
Wear on a conventional runnersystem
Bilder: IFKB/Leroxid
MM
_IN
NO
201
2
Institut für Konstruktion und Fertigung in der FeinwerktechnikUniversität Stuttgart