NTI 2.3 NTI-Kahla GmbH • Rotary Dental Instruments Fax +49(0)36424-573-29 Labor • Laboratory • Laboratoire Hartmetall - Fräser Tungsten Carbide Cutters Fraises en Carbure de Tungstène de Laboratoire das Komplettprogramm mit 18 Verzahnungsarten zur Bearbeitung aller zahntechnischen Werkstoffe. A complete range with 18 blade configurations for trimming all materials used in dental technology. Le programme complet avec 18 types de dentures, pour le travail de tous les matér iaux utilisés en technique dentaire. SFE SFN SFTE FE CE CN SCE SCN XCE XCN D DF QF QSF GTi GE QSCN FLE•LE SCLE Cut ISO SFE Superfine Cross Cut 110 SFN Superfine Plain Cut 102 SFTE Superfine Cut, titanium nitride coated 110 FE Fine Cross Cut 140 CE Standard Cross Cut 190 CN Standard Plain Cut 175 Cut ISO SCE Coarse Cross Cut/Special Acrylic Cutters 220 QSCN Coarse Straight Blade Cross Cut 176 SCN Coarse Plain Cut 215 GE Bulk Cross Cut 220 XCE Supercoarse Cross Cut 223 XCN Supercoarse Plain Cut 222 Cut ISO DF Diamond Fine Cut For Slightly Rough Surface 141 D Diamond Cut With Prism Surface 191 QF Spiral Fine Cut 134 QSF Spiral Superfine Cut 137 GTi Special cutter for titanium, Cross Cut with Fewer Blades 190 FLE, LE, SCLE L - Cut Spezial Cutters 140/240/190 Tungsten Carbide Cutters - Application Chart Recommended speeds for TC Cutters ISO Size opt./ rpm. 008 - 023 25.000 025 - 045 20.000 050 - 080 15.000 NTI-Kahla GmbH Rotary Dental Instruments Im Camisch 3 D-07768 Kahla/Germany Tel. +49(0)36424-573-0 Fax: +49(0)36424-573-29 [email protected] • www.nti.de Materials Application ceramics SFE Used for finishing and smoothing surfaces and metal ceramics/full ceramics SFN refining margins. SFTE precious and SFE Used for finishing and smoothing surfaces and semi - precious alloys SFN refining margins. inlays, onlays, crowns & bridges SFTE combination and telescope works FE QF QSF L - Cut Special Cutters FLE D Preparing metal surfaces prior to ceramic, resin or DF composite application in order to achieve a better bond. non - precious alloys SFE Used for finishing and smoothing surfaces, crowns & bridges QF contouring occlusal areas and refining margins. combination and telescope works QSF L - Cut Special Cutters FLE D Preparing metal surfaces prior to ceramic, resin or DF composite application in order to achieve a better bond. CrCo, CrNi, CE Bulk trimming, contouring. alloys for partial dentures FE Fine adjustment and smoothing of surfaces. L - Cut Special Cutters LE•FLE Materials Application TITANIUM QF Trimming, contouring. crowns, bridges QSF GTi C & B Acrylics SFE For trimming and smoothing acrylic and metal Composite SFN surfaces, contouring occlusal areas and refining QF margins of PFM restorations. QSF Denture acrylics CE Removal of sprues. and tray materials CN Rough trimming. SCE SCN XCE XCN GE L - Cut Special Cutters SCLE•LE Plaster CE Working on stone dies. Model plasters/Stone GE Wet and dry plaster, bulk material reduction. XCE XCN L - Cut Special Cutters SCLE•LE Soft reline materials QSCN Trimming Die Anwendungsempfehlungen zeigen übersichtlich alle Möglichkeiten der NTI Hartmetallfräser This chart shows clearly all the applications of NTI tungsten carbide cutters. Les conseils d’utilisation présentent d’une manière très détaillée les possibilités des fraises en carbure NTI.
20
Embed
New Technology Instruments Hartmetall - Fräser Tungsten ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
ceramics SFE Used for finishing and smoothing surfaces and metal ceramics/full ceramics SFN refining margins.
SFTE
precious and SFE Used for finishing and smoothing surfaces and semi - precious alloys SFN refining margins. inlays, onlays, crowns & bridges SFTEcombination and telescope works FE
QFQSFL -Cut Special Cutters FLED Preparing metal surfaces prior to ceramic, resin or DF composite application in order to achieve a better
bond.
non - precious alloys SFE Used for finishing and smoothing surfaces, crowns & bridges QF contouring occlusal areas and refining margins.combination and telescope works QSF
L -Cut Special Cutters FLED Preparing metal surfaces prior to ceramic, resin or DF composite application in order to achieve a better
bond.
CrCo, CrNi, CE Bulk trimming, contouring. alloys for partial dentures FE Fine adjustment and smoothing of surfaces.
SFE SUPERFINE CROSS CUT Used for finishing gold and preciousalloys, micro filled Compositematerials and non-precious alloys.The special toothing does not createa hammer effect and can thereforebe used for finishing all ceramics.
SFN SUPERFINE PLAIN CUT Used for abrasion on <, acrylics.Reduces rework. Especially suitedfor papilla shaping on prostheticappliances.
SFTE SUPERFINE CUT These special titanium-nitride coatedcutters offer specific cooling pro-perties e.g. for clusp preparation inthe shoulder area, shortening ofattachments, fine finishing of inlaysincl. ceramic inlays.
FE FINE CROSS CUT Used for abrasion on gold andother precious metals, acrylics. It smoothens the surface and it enables accurate operation on anystructure.
CE STANDARD CROSS CUTUsed for coarse abrasion on chro-me-cobalt alloys, precious metalalloys, chrome-nickel alloys, modelcast alloys, acrylics. Ideal for finecutting on plaster.
CN STANDARD PLAIN CUT Used for coarse abrasion on goldand other precious metals, leaving asmooth surface on acrylics. Thisreduces rework.
SCE COARSE CROSS CUT/SPECIAL ACRYLIC CUTTERS This special Acrylic Cutter removesresins incl. tray materials quickly andeasily, leaving a smooth surface.
QSCN COARSE STRAIGHT BLADECROSS CUT For working on soft acrylics in thedental surgery and laboratory.
SCN COARSE PLAIN CUT Used for BULK abrasion on acrylics.
GE BULK CROSS CUT Bulk material reduction of acrylics,dry plaster and stone.
SFE DENTURE CROISÉE SUPERFINEUsinage de précision de tous lesalliages et des composites. Idéalepour la céramique puisque le tran-chant spécial de la fraise empêchel’apparition de craquelures de surface.
SFN DENTURE SIMPLE SUPER FINELa surface usinée, lisse, obtenue surtous les alliages et composites,réduit les reprises de finition.Particulièrement adaptèe au facon-nage des papilles des prothèses.
SFTE REVÉTUES DE NITRURE DETITANE Ces fraises, revêtues de nitr-ure de titane permettent un usinagefrais, par exemple sur la finition descrochets et particulièrement sur leszones intéressant les épaulementsainsi qu’au cours de la réduction desattachements, la finition des inlays,même ceux réalisés en céramique.
FE DENTURE CROISÉE FINEAdaptéé à tous les matériaux dentaires. Permet de réaliser unesurface lisse et permet la réalisationprécise de n’importe quelle structurede surface.
CE DENTURE CROISÉE STANDARD Pour le traitement desalliages non-précieux et des alliages de stellites ainsi que pourle premier meulage de tous lesmatériaux dentaires sans arrache-ment des surfaces. Idéale pour letraitement fin du plâtre.
CN DENTURE SIMPLE STANDARDUtilisable pour tous les matériauxdentaires. La denture simple permetd’obtenir une surface lisse, particu-lièrement avec les résines, elle réduitles éventuelles reprises de finition.
SCE DENTURE CROISÉE GROSSEL’outil agressif pour l’usinage detoutes les résines, y compris lesmáteriaux pour porte -empreintes.Cette fraise est également adaptéeau fraisage du plâtre.
SCN DENTURE SIMPLE GROSSEPour un travail rapide et efficace surrésine et plâtre.
GE DENTURE CROISÉE GROSSERéduction grosse des plâtres secs.
SFE KREUZVERZAHNUNG SUPERFEIN Zur Feinstausarbeitungaller Legierungen und Composite.Die spezielle Schneidengeometrieerzeugt keinen Hammerschlageffekt,deshalb ist SFE ideal auch auf allenKeramikmassen.
SFN EINFACHVERZAHNUNGSUPERFEIN Glattes Schliffbild aufallen Legierungen und Compositenreduziert die Nacharbeit. Bei Prothesen besonders zurGestaltung der Papillen geeignet.
SFTE SUPERFEINE VERZAHNUNGErmöglicht sehr kühles Schleifendurch die TITANNITRID-Beschich-tung, z.B. Klammerausarbeitung,besonders im Schulterbereich;Kürzen von Geschieben;Feinausarbeitung von Inlays, auchaus Keramik.
FE KREUZVERZAHNUNG FEIN Zur Bearbeitung aller Dental-materialien. Feinbearbeitung vonEdelmetall-, NEM- und Modellguss-legierungen. Glättet die Oberflächeund ermöglicht ein gezieltesAusarbeiten jeder Struktur.
CE KREUZVERZAHNUNG STANDARD Bearbeiten von NEM-und Modellgußlegierungen undzum Grobabtragen aller Dental-materialien, ohne die Oberflächeaufzureißen. Ideal auch für dieFeinbearbeitung von Gips.
CN EINFACHVERZAHNUNGSTANDARD Auf allenDentalmaterialien einsetzbar,ermöglicht ein glattes Schliffbild aufKunststoffen und reduziert so dieNacharbeit.
SCE KUNSTSTOFF SPEZIAL/KREUZVERZAHNUNG GROB Der aggressive Fräser zurGrobabtragung aller Kunststoffe(auch Löffelmaterialien) und für dieGipsbearbeitung.
QSCN EINFACHVERZAHNUNGMIT QUERHIEB Zur Bearbeitung von weichbleiben-den Kunststoffen in Praxis und Labor.
SCN EINFACHVERZAHNUNGGROB Mit diesem Fräser werdenschnell glatte Oberflächen auf allenKunststoffen erreicht.
GE KREUZVERZAHNUNG GROBGrober Materialabtrag bei trocke-nen Gipsen.
XCE KREUZVERZAHNUNGSUPERGROB, KUNSTSTOFF -FRÄSER Die standfesten Fräser fürgroßflächiges Abtragen vonKunststoffen und zum Einsatz bei derBearbeitung von Gipsen undLöffelmaterialien aus Kunststoff.
XCN EINFACHVERZAHNUNGSUPERGROB Großflächiges, abrasives Bearbeitenvon Modellgipsen und Kunststoffen.
DF DIAMANTSCHLIFF FEINANGERAUHTE OBERFLÄCHE Feines, schuppiges Schliffbild, speziell für transluzente Keramik-massen entwickelt für ästhetischeVerblendung.
D DIAMANTSCHLIFFPRISMENOBERFLÄCHE Rauhes, streifiges Schliffbild für dieVorbereitung der Verblendfläche fürKunststoffauftrag.
QF SPIRALVERZAHNUNG FEIN Erzeugt ein feines Schliffbild aufallen Legierungen. Der Spiralschliffverhindert ein Zusetzen währendder Arbeit, deshalb auch ideal fürTitan geeignet.
QSF SPIRALVERZAHNUNG SUPER FEIN Superfeine schnittfreudigeVerzahnung mit Querhieb. Auf Titan zum Ausarbeiten undKonturieren (Kronen und Brücken).
GTi TITANVERZAHNUNG GROB,KREUZVERZAHNUNG MITGERINGER SCHNEIDENZAHL Zur Bearbeitung von schwer zer-spanbaren Werkstoffen (TITAN). Die neuartige Verzahnung, mit spe-ziell aggressivem Schneidverhalten,für eine hohe Schneidleistung undeine längere Standzeit, für vibrati-onsarmes, weiches und kontrolliertesArbeiten.
FLE•LEL - VERZAHNUNG Spezialfräser, linksschneidend.Linkshänderfräser in drei verschiede-nen Verzahnungen.
XCE SUPERCOARSE CROSS CUT JUMBO PLASTER OR ACRYLICCUTTERS Used for cutting plaster and acrylics.Removes large amounts of plastic.
XCN SUPERCOARSE PLAIN CUT Used for BULK abrasion on plasterand acrylics.
DF DIAMOND FINE CUT FORSLIGHTLY ROUGH SURFACE Used to obtain an only slightlyrough surface and to increase thesurface retention on the metal frame-work for translucent ceramic andplastic crown- and bridgework.
D DIAMOND CUT WITH PRISMSURFACE For increased surface retention onthe metal framework (by more100%) for composite crown- andbridgework.
QF SPIRAL FINE CUT Used for precious and semi -pre-cious metal alloys, VMK metal andTitanium without clogging.
QSF SPIRAL SUPERFINE CUT Straight blades with finer cross cuts,designed to trim mouth guards andsoft reline material. QSF cutters areideal on Titanium(Crowns and bridges).
GTi SPECIAL CUTTER FOR TITANIUM, CROSS CUTWITH FEWER BLADES With a special toothing of workingout of soft Titanium alloys. Thank to the new geometry of tooth-ing it gives stability on the cuttingedge and the instrument cuts veryaggressively. Advantages: vibrations free working,aggressive cutting, long service time.
FLE•LEL-CUT SPEZIAL CUTTERS In three different grits, cutting to theleft for left-handed operators.
XCE DENTURE CROISÉE SUPERGROSSEA l’aide de cette fraise, des surfaceslisses sont réalisées très rapidementsur toutes les résines, des plâtreset des portes -empreintes.
XCN DENTURE SIMPLE SUPERGROSSEUsinage rapide de surfaces importantes des plâtres ou des résines.
DF DENTURE DIAMANTÉE FINEÀ SURFACE RUGUEUSEUtilisées pour obtenir une surfacelégèrement rugueuse pour la rétention.Des fines masses de céramique etdes incrustations esthétiques.
D DENTURE DIAMANTÉE À SURFACE PRISMATIQUESurface usinée rugueuse et striéeobtenue pour la préparation dessurfaces recevant des incrustationsen résine.
QF DENTURE HÉLICOÏDALE FINELa fraise de choix pour obtenir unesurface usinée particulièrement lisseavec tous les alliages. A conseillerparticulièrement pour le titane puis-que la géométrie des lames empêchele bourrage lors de la coupe.
QSF DENTURE HÉLICOÏDALE SUPERFINEDenture superfine à coup en èchar-pe. Idéal pour travailler et contourirle titan (couronnes et ponts dentai-res).
GTi FRAISE À GROSSE DENTURECROISÉE AVEC MOINS DELAMES POUR TITANEPour travailler les matériaux difficilesà meuler (titane). Nouvelle dentureà coupe agressive et longue duréede vie. Travail contrôlé et sans vibrations.
FLE•LEFRAISE POUR GAUCHERFraise spéciale, denture coupant àgauche. En trois dentures différentes:Denture croisée standard, fine,supergrosse.
Vorteile der Beschichtung:Die glatte Oberfläche (dimplet surface) ermöglicht durch den optimalenVerschleißwiderstand ein reibungsfreies Abgleiten der Metallspäne.Das bedeutet einen kühlen Schliff mit geringer Wärmeentwicklung derMaterialoberfläche.Die extreme Oberflächenhärte von 3600 HV sorgt für eine langeStandzeit und hohe Wirtschaftlichkeit.
The advantages of the coating:The smooth dimplet surface makes possible, through the optimal wear-and-tear, ridge-free, smooth removal of metal chips. This means a coolcut with minimal heat development on the material surface.The extreme surface hardness of 3,600 HV ensures high efficiency andlong life of the instrument.
Les avantages du revêtement spécial:La surface lisse rend possible un glissement nonfrictionné des copeauxmétalliques par la résistance d’usure optimale. Ça permet un usinagesans élévation de la température sur la surface du matériau.La dureté extrème de 3600 HV assure une longévité extraordinaire etpar cela une efficacité énorme de ces fraises spéciales.
Bitte Drehzahlbereiche beachten (Drehzahltabelle - Seite 11.15) / Please observe Recommended speeds (speed chart - page 11.15) / Respecter les vitesses de rotation recommandées (voir à la page 11.15)
040
11,5
014
3,1
MC073SFE(277)
Größe/Size/taille ø 1/10 mm
Länge - Length in mm - longueur
Shank ISO
HP 506 104 277 110... MC073SFE-... 014
1
Millennium Cutter • Fraise MillenniumDie Spezialverzahnung erzeugt keinen Schlageffekt und eignet sich deshalb auch auf Keramik.The special cutting edge ensures smooth grinding and is therefore also suitable for porcelain.La denture spéciale assure un meulage en douceur, ce qui permet le travail sur la céramique.