M1 Series Oil & Gas Intertherm engineered these furnaces for ease of installation as well as high efficiency in manufactured or modular homes. Cabinet insulation absorbs operating noise rendering a whisper quiet product. Gas units come set up for natural gas, however, conversion takes a few minutes with new style burner. Comes with two washable permanent air filters. May be installed in a closet or alcove with 0" clearance back and sides. Oil furnaces use kerosene or #2 fuel oil. These furnaces are easily adaptable to accept add-on air conditioners or heat pumps. One (1) year limited warranty on parts, one (1) year limited warranty on labor, ten (10) year limited heat exchanger warranty on product sold after Feb. 1, 2006. UL listed and CSA certified. NEW SUPER HIGH EFFICIENCY OIL AND GAS FURNACES by Part Number Fuel Type BTUH Output Flue Dia Ign Type Afue Price 1-M5SB066 Oil 57,000 5 In. A 84.00% $1,376.00 1-M5SB086 Oil 72,000 5 In. A 82.00% $1,417.00 1-M1MB056 Gas 46,000 5 In. C 81.00% $881.00 1-M1MB070 Gas 57,000 5 In. C 81.00% $887.00 1-M1MB077 Gas 62,000 5 In. C 80.00% $1,000.00 1-M1MB090 Gas 70,000 5 In. C 80.00% $1,169.00 E4E Series Electric May be installed in a closet or alcove, approved for single/multi-story residential or mobile/modular structures. May be used for upflow or counter flow applications, approved for zero clearance from combustible materials, air filter is in return end of furnace, has an area on left front of cabinet for refrigeration tubing. UL listed and CSA certified. All electric furnaces are shipped less grill/frame assembly, priced below. 1-year limited parts warranty, 1-year limited labor warranty on product sold after Feb. 1, 2006. ELECTRIC FURNACES by Part Number Description KW BTUH Output Price 1-E4EB010 10.4 35,000 $573.00 1-E4EB012 12 41,000 $595.00 1-E4EB015 15.4 53,000 $626.00 1-E4EB017 16.6 57,000 $649.00 1-E4EB020 20.4 70,000 $698.00 Dimensions of E3 series furnaces: Height (incl. grill) 56", Width 20", Depth 24-3/4". Note: E3EB series has a 4-speed blower capable of handling up thru 4 tons of cooling at .3 in. esp. 1-9029890 GRILL/FRAME ASSEMBLY (27"H x 20"W) $39.00 *Prices are Subject to Change without Notice.* (336) 744-9071 Winston-Salem, NC Toll Free Phone (800) 836-3627 Page 3
32
Embed
NEW SUPER HIGH EFFICIENCY OIL AND GAS …triadmobilehomesupply.com/catalog/section_01.pdf · Package Units PACKAGE AIR CONDITIONERS BY The P3 series air conditioner is compact, reliable
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
M1 Series Oil & Gas
Intertherm engineered these furnaces for ease of installation as well as high efficiency in manufactured or modular homes.Cabinet insulation absorbs operating noise rendering a whisper quiet product. Gas units come set up for natural gas, however, conversion takes a few minutes with new style burner. Comes with two washable permanent air filters. May beinstalled in a closet or alcove with 0" clearance back and sides. Oil furnaces use kerosene or #2 fuel oil. These furnaces are easily adaptable to accept add-on air conditioners or heat pumps. One (1) year limited warranty on parts, one (1) year limited warranty on labor, ten (10) year limited heat exchanger warranty on product sold after Feb. 1, 2006. UL listed and CSA certified.
NEW SUPER HIGH EFFICIENCY OIL AND GAS FURNACES by
Part Number Fuel Type BTUH Output Flue Dia Ign Type Afue Price1-M5SB066 Oil 57,000 5 In. A 84.00% $1,376.001-M5SB086 Oil 72,000 5 In. A 82.00% $1,417.001-M1MB056 Gas 46,000 5 In. C 81.00% $881.001-M1MB070 Gas 57,000 5 In. C 81.00% $887.001-M1MB077 Gas 62,000 5 In. C 80.00% $1,000.001-M1MB090 Gas 70,000 5 In. C 80.00% $1,169.00
E4E Series Electric
May be installed in a closet or alcove, approved for single/multi-story residential or mobile/modular structures. May be used for upflow or counter flow applications, approved for zero clearance from combustible materials, air filter is in return end of furnace, has an area on left front of cabinet for refrigeration tubing. UL listed and CSA certified. All electricfurnaces are shipped less grill/frame assembly, priced below. 1-year limited parts warranty, 1-year limited labor warranty on product sold after Feb. 1, 2006.
Dimensions of E3 series furnaces: Height (incl. grill) 56", Width 20", Depth 24-3/4". Note: E3EB series has a 4-speed blower capable of handling up thru 4 tons of cooling at .3 in. esp.
1-9029890 GRILL/FRAME ASSEMBLY (27"H x 20"W) $39.00
Part Number Description Size Price1-9036580 TELESCOPING FLUE ASSEMBLY Extends from 15" min. to 23" max.
measuring from roof flange to furnace. Use with oil or gas. Flat flange. 5" Dia. Pipe $112.00
1-9036600 TELESCOPING FLUE ASSEMBLY Extends from 27" min. to 47" max.measuring from roof flange to furnace. Use with oil or gas. Flat flange.
5" Dia. Pipe $145.00
1-9036640 TELESCOPING FLUE ASSEMBLY Extends from 35" min. to 63" max.measuring from roof flange to furnace. Use with oil or gas. Slope flangewill flex from 3/12 pitch to 5/12 pitch.
5" Dia. Pipe $186.00
1-9036660 TELESCOPING FLUE ASSEMBLY Extends from 51" min. to 95" max.measuring from roof flange to furnace. Use with oil or gas. Slope flangewill flex from 3/12 pitch to 5/12 pitch.
5" Dia. Pipe $276.00
DUCT CONNECTORS FOR INTERTHERM M AND E SERIES FURNACES
Part Number Description Price1-9019870 DUCT CONNECTOR 11.25" x 13.5" x .88" $37.301-9019880 DUCT CONNECTOR 11.25" x 13.5" x 2" $37.301-9019890 DUCT CONNECTOR 11.25" x 13.5" x 4.25" $34.99
GRILL & FRAME ASSEMBLY FOR INTERTHERM E SERIES ELECTRIC FURNACES
Used on Nordyne Electric Furnaces when furnace is installed in an alcove.Grill overall size is 20” wide x 27” high. Grill color is white.
Part Number Description Price1-9029890 GRILL/FRAME ASSEMBLY (27"H x 20"W) $39.00
CONVERTS FROM OIL TO GAS AND VICE-VERSA IN APPROXIMATELY 3 MINUTES
3-SPEED BLOWER ASSEMBLY
ONLY 18 INCHES WIDE, 57 INCHES TALL, AND 24-1/4 INCHES DEEP
MAY BE INSTALLED IN A CLOSET OR ALCOVE
UL LISTED
HAS 4 INCH FLUE ASSEMBLY
PULLS COMBUSTION AIR FROM UNDER THE HOME
DOES NOT ACCEPT SPLIT AIR CONDITIONING
LIFETIME LIMITED WARRANTY ON HEAT EXCHANGER, TO ORIGINAL OWNER, FOR PRODUCT MADE AFTER 12/31/2012
ONE YEAR LIMITED PARTS AND ONE YEAR LIMITED LABOR WARRANTY
WE STOCK A FULL LINE OF REPAIR PARTS FOR MILLER AND INTERTHERM BRAND FURNACES
THE 3 IN 1 FURNACE by
Part Number Description Price1-CMF80PO OIL FURNACE (60,000 btuh output, 80% afue) $1,629.001-9031000 CONVERSION KIT (Converts CMF80PO to CMF65PO - 52,000 BTUH Output) $22.001-9031020 CONVERSION KIT (Converts CMF80PO to CMF100PO - 72,000 BTUH Output) $49.001-104060000 FLUE ASSEMBLY (4" dia. pipe, 12" from roof flange to bottom of roof jack) (SRJ-1) $124.001-104060018 FLUE ASSEMBLY (4" dia. pipe, 48" from roof flange to bottom of roof jack) (SRJ-4) $236.001-103947002 FLUE PIPE (4" X 28") $18.491-9034530 BASE (MA-200 for gas or oil) $91.00
CMF Series Oil Cottage Base
Combine this base with any CMF series furnace (gas, oil, or electric) and you can heat any small house, cabin, or a-frame without the use of duct work. Width 18", Depth 24", Height 8-3/4"
Part Number Price1-9016960 $260.00
AUTOMATIC CLOSE-OFF DAMPER
Federal mobile home standard 280.707-A-2 requires the installation of a close-off damper at the furnace base to prevent cold air from being discharged, by a package air conditioning system, into the furnace area andcreating condensation within the furnace heat exchanger. This condensation causes premature heat exchangerfailure. This regulation applies to fuel burning furnaces only.
The MT5 series heat pumps offer exceptional performance from a small compact package. Whencombined with our engineered coils and air handlers offer a full line of quality split systemheating/cooling equipment. Some of the Features and Benefits: Durable, attractive cabinet, Copper tube/aluminum fin coils, Permanently lubricated motor, Full service valves, Plastic mesh hail guard,Time/temperature defrost, Removable top grill assembly, One piece top/orifice, Common suction service port, 2-1/2" high pedestal base, Five minute restart time delay, Suction accumulator, Hot gas muffler, Easycompressor and control panel side access. One (1) year limited parts and five (5) year limited compressor warranty.
MEDALLION SERIES SPLIT-SYSTEM HEAT PUMPS
BY
Part Number Outdoor HeatPump SectionsR410ARefrigerant 13Seer
BTUH Cooling BTUH Heat SEER HSPF COP Price
1-921676N MT4QD 024 K 23,600 23,600 13 9 3.6 $1,236.001-921677N MT4QD 030 K 29,200 30,000 13 8 3.4 $1,416.001-921678N MT4QD 036 K 35,400 36,000 13 8 3.6 $1,572.001-920685N MT4QD 042 K 39,000 40,500 13 8 3.6 $1,731.00
Outdoor units have quick-connect type lineset connections.
1-920686N MT4QD 048 K 46,500 46,500 13 8 3.6 $1,852.00
UNCASED COILS, A-TYPE, UP/DOWN FLOW, AIR CONDITIONER & HEAT PUMP
Above coils are 18.5" wide x 19.5" deep x the height listed above. Above coils have a TXV (thermostatic expansion valve) for metering the refrigerant. Condensate pans are made of molded ryolite that will not rust. All Coils have quick-connect type connections.
1-5595770 48,000 13 CM4Q 54U 18.5" $533.00
REFRIGERANT LINESETS (INSULATED, HAS QUICK CONNECTIONS BOTH ENDS)
Part Number Description Price1-9207050 3/4" & 3/8" DIAMETER, 20 FT. LONG $181.001-9207090 3/4" & 3/8" DIAMETER, 30 FT. LONG $268.001-9207100 7/8" & 3/8" DIAMETER, 30 FT. LONG $298.00
THERMOSTATS, AIR FILTER KITS, FAN TIME DELAY KITS
Part Number Description Price1-9197600 HEAT PUMP THERMOSTAT (W-R BRAND) (Non-Programmable Digital Manuel
Change Over)$71.00
1-9177630 AIR FILTER KIT FOR CMQX TYPE A-COILS, 2/PKG $17.351-9177630 AIR FILTER KIT FOR C5QA TYPE A-COILS, 2/PKG $17.351-9145390 ADAPTER KIT (Aluminum filters, 56" drain hose and close-off plates for coil sizes
The P3 series air conditioner is compact, reliable and competitively priced. Easy access to unitcomponents makes it servicer and installer friendly. All units are 49 inches long, 35 inches wideand 30.2 inches high. All units require 12 inch diameter supply and 14 inch diameter return ductsizes. One year limited warranty on parts and labor, five year limited warranty oncompressor.
Part Number BTUH Output SEER Packaged Air Conditioners 13 Seer
Price
1-9189730 24,000 BTUH 13 P5RD 024 K $1,397.001-9189740 30,000 BTUH 13 P5RD 030 K $1,499.001-9189750 35,400 BTUH 13 P5RD 036 K $1,698.001-9189760 40.500 BTUH 13 P5RD 042 K $1,862.001-9189770 47,500 BTUH 13 P5RD 048 K $1,985.00
Sheet Metal Kits
SHEET M ETAL KITS FOR PACKAGED AIR CONDITIONERS AND HEAT PUMPS
Part Number Description Price1-3401 SINGLE WIDE FITTING KIT (Contains one 12" supply duct adapter w/damper, & one
12" x 20" x 14" return w/filter and grill)$89.00
1-3405 SUPPLY DUCT ADAPTER WITH CLOSE-OFF DAMPER (To Make Double WideFitting Kit Combine Part #'s 1-3401+1-3410 with 1-3405)
$29.95
1-3410 WYE FITTING, 12" x 12" x 12" $26.85
Heater Kits
ELECTRIC HEAT KITS FOR P3/P5 AND Q3/Q5 PACKAGED UNITS
Part Number Description KW BTUH Output Price1-9171660 H3HK-005H-01 5 17,000 BTUH @
240 VOLTS$98.75
1-9171680 H3HK-010H-01 10 34,000 BTUH @240 VOLTS
$159.00
1-9171690 H3HK-015H-01 15 52,500 BTUH @240 VOLTS
$199.00
Thermostat
HEATING COOLING THERMOSTAT WITH SUB-BASE
Part Number Description Price1-6242920 HEAT-COOL THERMOSTAT W/SUB-BASE for Air Conditioners $39.001-9196040 HEAT PUMP THERMOSTAT, Digital, Non-Programmable (White-Rodges Brand,
INTERTHERM’S packaged heat pump looks like, and is the same size as the packaged airconditioner, comes in five capacities, and uses the same accessories as the packaged airconditioners. The packaged heat pump has too many features to mention herein, please contact us for literature on these fine products. One year limited warranty on parts and labor and a fiveyear limited compressor warranty.
Part Number BTUH Output SEER Packaged Heat Pumps 13Seer
1-9110300 BLOWER ASSEMBLY, (2 thru 4 tons)Intertherm's MSH & MGH seriesfurnaces without an "A" in the modelnumber
$318.00
1-9019980 BLOWER ASSEMBLY, (2 thru 3.5 tons)Intertherm MSH & MGH series furnaceswith an “A” in the model number. Alsofits Coleman/Evcon’s 7900 series.
$206.00
1-9019990 BLOWER ASSEMBLY, (2 thru 4 tons)Intertherm MSH & MGH series furnaceswith an “A” in the model number. Also fitsColeman/Evcon 7900 series.
$322.00
1-9034130 BLOWER ASSEMBLY, (2 thru 4 tons)Intertherm M1 series oil and gasfurnaces. 4-speed, 2 thru 4 ton capacity
$298.00
1-9034140 BLOWER ASSEMBLY, (2 thru 5 tons)Intertherm M1 series oil and gasfurnaces. 4-speed, 2 thru 5 ton capacity
$351.00
1-9028090 BLOWER ASSEMBLY, (2 thru 3.5 tons)Intertherm MG, MS, MB & MM serieswith an "A" in the model number.
$249.00
1-9028100 BLOWER ASSEMBLY, (2 thru 4 tons)Intertherm MG, MS, MB & MM serieswith an “A” in the model number.
$292.00
AIR HANDLERS by INTERTHERM
These air handlers are designed and approved for attic, basement, alcove, closet and crawl space installations. May be installed in upflow, horizontal left and right and downflow (downflow with appropriate field kit) discharge position. Electric heater kits are available in 5 kw thru 20 kw. Coil is factory installed for air conditioning/heat pump applications. All coils have TXV(thermostatic expansion valve) metering device. 208-240 volt single phase current. Coils have sweat connections. R-410A refrigerant.
A Cabinet: 43-5/16” H x 14-3/8” W x 22” D B Cabinet: 43-5/16” H x 19-11/16” W x 22” D C Cabinet: 55-15/16” H x 22-7/16” W x 22” D
One (1) year limited parts and labor warranty.
Built-in filter rack
Simple wiring
Multi-speed Blower
Slide-in Controls
Insulated Cabinet
May be field up-fitted tovariable speed
Part Number Description Price1-904303D 2 TON CAPACITY (A Cabinet),
B5BM-X24K-A$535.00
1-904304D 2.5 TON CAPACITY (A Cabinet), B5BM-X30K-A
$573.00
1-904307D 3 TON CAPACITY (B Cabinet), B5BM-X36K-A
$693.00
1-904308D 3.5 TON CAPACITY (B Cabinet), B5BM-X42K-A
Part Number KW Cabinet Size Price1-9044070 5 A,B,C $139.001-9044120 10 A,B,C $186.001-9044140 15 B,C $258.00
DOWNFLOW ADAPTER KITS
Part Number Cabinet Size Price1-9173420 A-MODEL $57.001-9193210 B-MODEL $63.001-9193220 C-MODEL $61.49
SINGLE CIRCUIT ADAPTER KITS
Note: Variable speed blower system may be field installed on any of the above air handlers. Call us for details.
Part Number Description Price1-9138740 Heater kits with 2 breakers $16.98
We stock repair parts forColeman/Evcon Heating-Coolingproducts. We are one of the oldest Nordyne,Intertherm Brand Distributors inthe Nation.
Hollow Spray
OIL BURNER NOZZLES
Most oil burner nozzles are designed to operate most efficient at 100 psig pump pressure. However, some burner manufacturers have designed their burners to operate at 120 psig, such as Becketts burner used on Intertherm’s M series furnaces.
PartNumber
Description Nozzles Type AOr H
Price
1-3009 HOLLOW SPRAY .50 GPH, 70 A, NOZZLE $8.981-3004 HOLLOW SPRAY .50 GPH, 80 A, NOZZLE $9.981-2999 HOLLOW SPRAY .50 GPH, 90 A, NOZZLE $8.981-3001 HOLLOW SPRAY .60 GPH, 80 A, NOZZLE $8.981-3002 HOLLOW SPRAY .60 GPH, 90 A, NOZZLE $8.981-2998 HOLLOW SPRAY .65 GPH, 80 A, NOZZLE $8.981-3003 HOLLOW SPRAY .65 GPH, 90 A, NOZZLE $8.981-3007 HOLLOW SPRAY .70 GPH, 80 A, NOZZLE $8.981-3005 HOLLOW SPRAY .75 GPH, 80 A, NOZZLE $8.981-3006 HOLLOW SPRAY .75 GPH, 90 A, NOZZLE $8.981-2997 HOLLOW SPRAY .85 GPH, 80 A, NOZZLE $8.981-2996 HOLLOW SPRAY .90 GPH, 80 A, NOZZLE $8.981-2995 HOLLOW SPRAY 1.0 GPH, 80 A, NOZZLE $8.981-2994 HOLLOW SPRAY 1.10 GPH,
Mitco makes the perfect fuel filter foroil fired heating appliances used insmall to average size homes andcommercial buildings. Ideal for finalfiltration in central fuel oil distributionsystems. May be used in one or twopipe systems. COMPLETE FILTER ASSEMBLY,264M Replaces 1A-25A and many others. Has3/8 inch F.P.T. on inlet and outlet. Willhandle up to 15 gallon per hour flowrate.
Part Number Description Price1-3010 1 to 3 $18.981-3010-3 3 & up $12.98
COMPLETE FILTER ASSEMBLY, 265M Replaces 2-A-700-A. Has 3/8 inch F.P.T. on inlet and outlet. Will handle up to 25 gallon per hour flow rate.
Part Number Price1-3012 $29.98
MICRO-FLOW REPLACEMENT
CARTRIDGES FOR FILTER ASSEMBLIES
Comes with three gaskets; body, centerbolt and vent. REPLACEMENT CARTRIDGE FOR:Mitco 264M & 264FM, General 1A-25A, Harvey 264 & 264F, Unifilter 77 andWestwood S254. This is the finestreplacement cartridge on the markettoday, is especially good for smallernozzles as used in manufactured homefurnaces.
Part Number Description Price1-3011 1 to 6 $2.291-3011-6 6 & up $1.69
Continuous Duty 1725 RPM 1/2" Dia. Shaft Resilient Mount
Reversible Rotation
Part Number Description Price1-2805 1/3 HP $114.00
We are the Largest Authorized Distributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the EastCoast. Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and HeatPump Parts.
Part Number Description Price1-6264360 5" Insertion $89.581-306039003 11" Insertion $161.47
SINGLE STAGE OIL PUMPS
“Suntec Brand”
Part Number Description Price1-3035 1725 RPM $129.001-3036 3450 RPM $119.00
SINGLE STAGE OIL PUMP
“Clean-Cut Technology” “Suntec Brand”
This pump has a built-in solenoid valve that prevents afterburn and allows for prepurging. Delivers up to 4 gph of fuel at 100 psig. Must be used with a R7184B1032 or equivalent primary control or Precision Delay (PD) timer.Used on all Intertherm & Miller oil furnaces effective 6-28-04.
Part Number Description Price1-3038 3450 RPM $119.00
SUNDSTRAND
Part Number Description Price1-2818 Mini-Pump $0.611-2819 H & J Models $0.61
WEBSTER
Part Number Description Price1-2820 Mini-Pump $1.191-2821 Large Models $0.69
Part Number Description Price1-2825 J, H, & S Models $4.491-2826 A & B Models, 1-3/8" $4.79
FUEL PUMP BY-PASS PLUGS
Part Number Description Price1-2828 1/16" Mini Pumps $0.751-2829 1/8" Large Pumps $1.29
OIL PUMP COUPLING
“KOUPLING KING”
KIT INCLUDES: Standard 5" long coupling assemblywith 1/2" motor end cap, 3/8" pump end cap and 7/16"pump end cap. The right combination for mostdomestic oil burners. Just cut to desired length.
Part Number Description Price1-3050 “KOUPLING KING” $6.98
ELECTRODE SETTING GAUGE
Part Number Price1-2859 $5.98
BLOWER MOTOR This 48 frame, 1/3 hp, 208-230 volt, reversible, 3-speed motor is 5-1/2” in diameter and has a 1/2” diameterby 5” long shaft. Mounting bolts are3-5/8” center to center and extendout from each end of motor oneinch. Motor is rated at 2.9 amps and nominal speed is 1175 rpm. May beused in any position. The sleevebearings are sealed and do notrequire oiling. Uses a 5 mfdcapacitor. Electrical leads are 24”long. Has 1-year factory warranty.
“ZOOM SPOUT OILER” Finest all-purpose turbine oil. Telescoping spout reaches almost everywhere. 4 fl. oz.
Part Number Description Price1-2890 1 to 6 $1.981-2890-6 6 & up $1.79
SHUT-OFF VALVES Sweat connections have extendedcopper fittings. Service port ismachined for Schrader core. Frontseating design with brass stem.Provides permanent access to system.
Part Number Description Price1-2895 3/8" SWEAT $31.101-2896 3/4" SWEAT $49.75
SEAL CAP MADE OF BRASS
Provides for finger tightening only to seal off stem.
MICROTEMP For electric furnaces, duct heaters, heat pumps & otherapplications. Opens at 336 deg. F.
Part Number Price1-2860 $2.29
FUSIBLE LINK by
MICROTEMP For electric furnaces, duct heaters, heatpumps & other applications. Provides lowcost protection against over heating. Maxoperation current is 15 AMP. Maxoperating voltage is 250 volts.
Part Number Description Price1-2861 OPENS 257 DEG. F. $4.981-2862 OPENS 300 DEG. F. $4.98
Part Number Description Price1-2866 OPENS 257 DEG. F. $4.981-2867 OPENS 300 DEG. F. $4.98
NOZZLE LINE FITTING
Brass fitting has 3/16" flare threads on one endand 1/8" f.p.t. on other end. Comes with lockingnut.
Part Number Description Price1-2840 1-7/16" OVERALL LENGTH $8.151-2842 1-3/16" OVERALL LENGTH $9.19
COMPRESSOR LEADS
12" long,#10 gauge insulated stranded wire leads are designed for replacing burned compressor leads. 3 leads per pkg.
Part Number Price1-2850 $15.05
COMPRESSOR TERMINAL REPAIR KIT
Replaces all damaged, burned or corroded standard compressor spade terminals. Tightens easily and quickly from the front with a screwdriver. Comes with three (red, white & blue color), four (4 ft.) foot long 10 AWG wire leads. Has insulated female spadeconnector on one end and insulated brass repair lug on the other.
Part Number Price1-2851 $31.95
COMPRESSOR TERMINAL
Heavy duty zinc plated female terminal for up to #10 gauge wire. For a longer lasting connection, wires should be soldered to wire terminal after crimping. 18 terminals per package.
Part Number Price1-2852 $4.20
VALVE CORE Fits all screw-in type valve stems.
Part Number Price1-2898 $0.69
HANDLES FOR VALVES Handles for oil tank valves, sillcock valves, gate valves, boiler drains and many other valves in both square and serrated shaft.
Part Number Description Price5-2017 SERRATED STEM $0.895-2018 SQUARE STEM $0.89
FILTER/DRIERS These liquid driers are designed toprotect the refrigerant system fromliquid and solid contaminants. Fullflow fittings for low pressure drop.For use with CFC, HCFC & HFCrefrigerants.
These suction line filter/driers aredesigned to remove moisture, acidsand contaminants from systems after acompressor burn-out. Low pressuredrop, inlet pressure access valve.Excellent for burn-out clean-up. Designed for permanent installation.UL & CSA listed.
(High Acid Capacity) Designed for system clean-up after compressorburn out. Lowest pressure drop, highesteffective filter area. High capacity acidretention desiccants. Salt spray protection.Shortest system cut-out lengths allow installation in tight areas. UL listed. Sweatconnectors. Two access valves simplifypressure drop measurement.
battery (not included). 16 ranges: AC volts, DC volts, DC current,
and OHMS. 1-Year Limited Warranty.
Part Number Price1-2881 $12.98
Digital
DIGITAL MULTITESTER
DM383
This meter has 30 ranges. 7 functions: AC volts, DC volts,
AC amps, DC amps, OHMS, Audible continuity and Diode test.
Low battery indication. Nearly 1" high LCD digits. Withstands a 10 ft. drop.
Meets UL and IFC standards. Comes with battery,
protective boot, test leads, and instructions.
5-Year Limited Warranty.Part Number Price1-2882 $79.00
DIGITAL MULTITESTER
DM410
The DM410 meter has all the features of the DM383 model, plus flame safeguard
and thermocouple testing capabilities. Designed especially for the HVAC service technician. DM410 comes with battery, protective boot, test leads and operating
instructions. 5-Year Limited Warranty.
Part Number Price1-2883 $129.00
Current Probe
CURRENT PROBE CA383B
The CA383B clamp-on current
probe has AC amperage range of 0-300 amps.
Use with any DMM meter with a 200 AC MV range, such as the
DM383B or the DM384. Come with soft carrying pouch
and instructions. 1-Year Limited Warranty.
Part Number Price1-2885 $47.95
Temperature Adapter
TEMPERATURE ADAPTER
TA1K
The TA1K is a K-type thermocouple temperature adapter.
It can be used on digital multimeters having 200 MV DC and /or 24 V DC ranges. Plugs
directly into “COM” and DCV/OHM input jacks.
-50 Deg. to 199.9 Deg. F. on 200 MV DC range.
-50 Deg. to 500 Deg. F. on 2 Volt DC range.
Comes with battery and 4 ft. probe1-Year Limited Warranty.
Part Number Price1-2884 $44.98
TEST LEADS ATL55
Insulated test leads for industrystandard multimeters. One red and oneblack lead with alligator clips. Leadsare 55” long.
Part Number Description Price1-669-443 1 to 3 $170.331-669-443-3 3 & up $64.00
Intermittent or Interrupted Ignition
HONEYWELL UNIVERSAL DIGITAL PRIMARY CONTROL
R7284U1004 This 6-wire (plus 2-wire cad cell)electronic primary control replacesmany of the earlier modelHoneywell primaries such as theR8184G, R4184G & R7184A. Hasmany more features than theprimaries it replaces. Has fieldadjustable safety switch timing of15, 30 or 45 seconds. Has fieldadjustable oil solenoid valve on-off & blower on-off (prepurge & postpurge) delays. May be programmedfor constant (intermittent) orinterrupted (transformer shuts offafter fire ignites) ignition.Programming & trouble shooting isdone on a digital LED screenlocated on the front of control. Maybe used on oil burners used in forcedair systems, boilers and waterheaters. Uses same cad cell as oldstyle primaries. 120 vac, 60 Ira, 10fla. 5-year limited warranty.
Part Number Price1-R7284U $98.001-R7284U-3 $79.00
Interrupted Ignition
HONEYWELL ELECTRONIC
PRIMARY CONTROL Interrupted Ignition
This R7184A1075 interrupted type oilprimary is a 4-wire control for residential oil fired burners. 10 fla and60 lra rated contacts. Lockout isfactory set at 15 seconds. This control is to be used with a solid state interrupted type transformer. Was usedon Intertherm and Miller brand M1 &CMF series oil furnaces with Becketburners from 3-23-01until 6-28-04.
Part Number Price1-6246290 $79.00
HONEYWELL ELECTRONIC
PRIMARY CONTROL Interrupted Ignition
This R7184B1032 primary is an 8-wire control for oil fired burners with 15sec. prepurge features. Has 15 sec.factory preset lockout. Must be usedwith oil pumps with “clean-cut” technology. Used on all Intertherm and Miller M1 & CMF series oilfurnaces with Beckett burners after 6-28-04.
What is “clean-cut” technology?Fuel pump has built-in solenoid valve that opens up after 15 seconds of run time to allow purging of combustion chamber. Rapid shut-off of the solenoid valve also prevents burner afterburn which eliminates fumes & soot build-up.
Part Number Price1-6246470 $72.00
We stock repair parts forColeman/Evcon Heating-Cooling products.
Part Number Description Price1-6606030 Assembly $19.691-780-230 CAD CELL ONLY $5.98
WHITE RODGERS CAD CELL
Part Number Description Price1-6606020 Assembly $15.691-780-229 CAD CELL ONLY $4.98
FIBERFAX ASBESTOS FREE
ROPE
A twisted 3-ply rope manufacturedfrom Fiberfax wicking. For use inand around furnaces and boilers.3/8" Dia. Sold per Foot.
Part Number Price1-3060 $1.29
DRAFT HEADS
Cap is made of galvanized steel and the pipethimble is stainless steel.
Part Number Description Price1-3055 4" PIPE $27.691-3056 5" PIPE $27.69
We are the Largest AuthorizedDistributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the EastCoast. We stock repair parts forColeman/Evcon Heating-Cooling products. We are one of the oldest Nordyne,Intertherm Brand Distributors inthe Nation. Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and HeatPump Parts.
FLUE ASSEMBLIES These flues do not have combustionair cavities, therefore, they are to beused where combustion air is drawnfrom under the home. NOTE: 5 in. diameter flues are nolonger available in thiscategory/style.
Part Number Description Price1-104060000 4" DIA. FLUE PIPE OPENING. 12 in.
from roof flange to bottom of flue. 28 in.overall length. Outside diameter is 10 in.
$124.00
1-104060018 4" DIA. FLUE PIPE OPENING. 48 in.from roof flange to bottom of flue. 62 in.overall length. Outside diameter is 10 in.
$236.00
Coleman/Evcon
FLUE ASSEMBLIES by COLEMAN/EVCON
All Coleman/Evcon flues are 5 in.diameter. All listed flues havecombustion air capability.
Part Number Description Price1-4000-7121 91" to 102" FLOOR TO FLANGE $145.001-4000-7141 99" to 120" FLOOR TO FLANGE $169.001-4000-8181 115" to 145" FLOOR TO FLANGE $198.001-4000-5441/C TOP CAP ASSEMBLY $48.481-7900-2911 RAIN CAP $27.63
Coleman/Evcon Crown Assembly
CROWN ASSEMBLY FOR COLEMAN FLUES
Fits 4000, 800 and 900 series Colemanflue assemblies. Includes top cap,lower cap and crown base. Made ofgalvanized steel.
Part Number Price1-4000-6941 $122.01
Intertherm Flue Cap Assembly
FLUE CAP ASSEMBLY FOR NEW STYLE
INTERTHERM FLUES Exterior is made of galvanized steeland the flue pipe is made of heavygauge galv. aluminum. Includes top cap, lower cap and base.
Part Number Price1-9036570 $83.91
Intertherm Flue Assemblies
FLUE ASSEMBLIES by INTERTHERM
All listed flues have combustion air capability. The flue assembly is made of heavy galvanized steel except for the inside pipe which is made of galvaluminum that will not rust. The inside pipe is five inches in diameter with an eight inch outer pipe. Fits all M-series oil and gas furnaces by Interthermand Miller.
Part Number Description Price1-9036580 5" DIAMETER PIPE TELESCOPING
FLUE ASSEMBLY. Extends from15"min. to 23" max. measuring fromflange to furnace. Use with oil or gas. Flat flange.
$112.00
1-9036600 5" DIAMETER PIPE TELESCOPINGFLUE ASSEMBLY. Extends from 27"min to 47" max. measuring from roofflange to furnace. Use with oil or gas. Flat flange.
$145.00
1-9036640 5" DIA. PIPE TELESCOPING FLUEASSEMBLY. Extends from 35" min. to63" max. measuring from roof flange tofurnace. For oil or gas. Slope flange willflex from 3/12 pitch to 5/12 pitch.
$186.00
1-9036660 5" DIAMETER PIPE TELESCOPINGFLUE ASSEMBLY. Extends from 51"min. to 95" max. measuring from roofflange to furnace. For use with oil orgas. Slope flange will flex from 3/12pitch to 5/12 pitch.
$276.00
TOP CAP for FIREPLACE Cap is made of galvanized steel and is 15-1/2" diameter, outer pipe is 12-3/4"diameter. Fits 8" diameter flue pipe. Overall height of assembly is 15". Thimble that fits over flue pipe is made of stainless steel.
Part Number Description Price1-3100 10" x 20" x 1" $2.391-3101 12" x 24" x 1" $2.191-3102 16" x 16" x 1" $2.591-3103 18" x 18" x 1" $2.991-3104 20" x 20" x 1" $2.291-3105 20" x 22-1/4" x 1" $4.491-3118 20" x 24" x 1" $3.241-3106 20" x 25" x 1" $2.491-3107 18" x 20" x 1" $2.981-3108 12" x 20" x 1" $2.491-3109 14" x 24" x 1" $2.491-3117 14" x 25" x 1" $2.391-3111 15" x 20" x 1" $2.291-3112 16" x 25" x 1" $2.291-3113 14" x 20" x 1" $2.491-3114 16" x 20" x 1" $2.29
ROLL HOG HAIR FILTER Washable
WILL CUT TO SIZE, SOLD PER FOOT 25” Wide x 30” Long x 1” Thick
Part Number Price1-3116 $1.98
FOAM FILTERS Washable
Part Number Description Price1-3110 EZE TRIM FILTER, FOAM 15-1/2" x 24"
x 1/4"$1.98
1-3210 EZE TRIM FILTER, FOAM 16" x 24" x1/4", (Has 3" square plastic grids to helpmaintain shape).
$5.98
1-6690750 FILTER ONLY 20" Wide x 53" Long, FITS: MSH SERIES.
$36.52
1-6689180 FILTER ONLY, (SACK TYPE) 17-1/2"Wide x 54" Long, FITS: MAC SERIESOIL, GAS & ELECTRIC.
$25.72
1-6690730 FILTER ONLY 26-1/2" Wide x 16-1/8"Long, FITS: MOC, MGC & CMFSERIES.
$5.98
1-6690730 FILTER ONLY FITS: MMG SERIES, USE 1-6690730 AND CUT TO LENGTH.
1-9217880 C8Q(B)AM24U-B thru 36U-B (TwoAluminum Filters, 15" x 17")
$15.98
1-9217840 REPLCOIL02M 2 THRU 4.5 TON(2/pkg), Fits 18" High Coils; Includes 2aluminum filters and filter brackets.
$36.49
MORTEX A-COIL FILTERS Washable
Part Number Description Price1-9177630 CM4Q(B)53-U & 54-U A-COIL (Two
Aluminum Filters (16" x 19"))$17.35
1-95205400 MORTEX A-COIL FILTERS, FOAM 2per set, 18" long x 16-1/2" wide (Use1-6684110 Metal Filters)
$0.00
FILTER SPRAY by
QWIK PRODUCTS This unique patent-pending PURACLEAN filter spray creates a passive, electrostatic filter surface with an increase of up to 300% in particle capture. Improves the performance of any type of filter. Excellent for high and medium velocity equipment. Improves the efficiency of non-electrostatic filters by as much as 65%. Ozone safe.
Made of high impact space age plastic.This revolutionary E-Z slider design allows control of air flow from wideopen to completely closed. Does nothave screw holes. One year limitedwarranty.
All these registers discharge the aircompletely vertical, no side to sidedischarge.
PartNumber
Description Call Size Face Size Price
1-3201 BROWN 4 x 8 5-3/8 x9-3/8
$4.49
1-3202 BROWN 4 x 10 5-3/8 x11-3/8
$4.29
1-3203 BROWN 4 x 12 5-3/8 x13-3/8
$5.98
1-3201W WHITE 4 x 8 5-3/8 x9-3/8
$4.49
1-3202W WHITE 4 x 10 5-3/8 x11-3/8
$4.29
1-3203W WHITE 4 x 12 5-3/8 x13-3/8
$5.98
Heating Only
FLOOR REGISTERS Heating Only
Made of Metal
The fins on these registers are bent out towards each end starting inthe middle of the register. This fin configuration causes thedischarge air to blow out towards each end of the register and lowto the floor. Since heated air is lighter than the surrounding air itwill float up towards the ceiling. This type of airflow configurationwill keep the floor warm as well as the rest of the room.
PartNumber
Description Call Size OpeningSize
FaceSize
Price
1-3225HB BROWN 4 x 8 3-3/4 x7-3/4
5-1/2 x9-1/2
$5.79
1-3226HB BROWN 4 x 10 3-3/4 x9-3/4
5-1/2 x11-1/2
$5.49
For Floor Registers
PAINTED SCREWS FOR FLOOR REGISTERS
Part Number Description Price4-2583B #8 x 1.5" Brown $0.08
BROWN IS SQ. HEAD WHITE IS PHILLIPS HEAD
4-2583W #8 x 1" White $0.10
RETURN AIR GRILL All metal construction with large easy to clean fins that sweep back twenty-two degrees to concealopening behind grille. White painted finish.
Part Number Description Price1-3239 10" x 4" $4.59
These steel floor grilles are heavyduty enough to support severalhundred pounds of weight. Baked-on brown paint.
Part Number Description OpeningSize
Price
1-3235 16" x 16" 14" x 14" $39.951-3236 14" x 22" 12" x 20" $39.981-3237 16" x 22" 14" x 20" $45.95
FILTER GRILL Return Air
All steel construction with largeeasy to clean fins that sweep backtwenty-two degrees to conceal airfilter. For sidewall or ceiling use.One piece heavy steel louveredface is hinged for easy access to airfilter. Accepts one inch thick airfilters. White painted finish.
Part Number Description Price1-3230 16" x 20" $28.981-3232 16" x 25" $33.691-3233 20" x 20" $25.591-3234 20" x 25" $31.981-3238 25" x 20" $31.98
RETURN AIR GRILL All metal construction with largeeasy to clean fins that sweep backtwenty-two degrees to concealopening behind grille. Whitepainted finish.
Part Number Description Price1-3239 10" x 4" $4.591-3240 14" x 8" $5.981-3359 14" x 14" $14.981-3360 16" x 16" $15.691-3362 20" x 20" $23.691-3364 20" x 25" $32.95
SIDEWALL/CEILING SUPPLY DIFFUSERS Adjustable Face Bars
This white metal diffuser hasadjustable roll-formed face bars with3/4” spacing for easy adjustment. Hassingle deflection adjustable multi-shutter dampers with positive shut-off when closed. Has two 3-16”diameter mounting holes. Comeswith white mounting screws.
PartNumber
Description Call Size Face Size Price
1-3369 WHITE 8" x 4" 9-3/8" x5-3/8"
$14.49
Note: All measurements are width x height
1-3370 WHITE 10" x 4" 11-3/8" x5-3/8"
$14.59
AIR DEFLECTOR For
Floor, Sidewall and Ceiling Registers
Magnetic Mount, extends from 8” to 14” in length, made of clear plastic, great for heating and/or cooling. Directs the air to where it heats or cools the best.
Designer White This 24 volt single stage heat, single stage cool thermostat has itscontacts sealed in a glass bulb to prevent arcing. The internal fanjumper plug feature allows the installer to adjust the fan delay forgreater system compatibility. The fan jumper plug is set at thefactory in the “G” position to allow a natural fan delay during theheating mode. If the heating system requires the fan to come onimmediately on start-up, you must remove the jumper plug and reinstall it in the “E” position. When two transformers are used,remove the factory installed jumper between Rc and Rh. Hasadjustable heat anticipator settings from .2 to 1.6 amps. Coolinganticipator setting is fixed at 4700 ohms. To power a damper motor or auxiliary circuit that requires continuous power, “O” and “B”terminals are provided. Temperature range from 50 degree f. to 90degree f. Has heat-off-cool system settings and fan on-off settings.Has thermometer built into thermostat cover. May be used with asingle stage heat pump system. May use with oil, gas or electricfurnaces.
Part Number Price1-9148390 $43.13
HEAT-COOL THERMOSTAT by HONEYWELL “The Round One”
This T87F round thermostat is designed for lowvoltage control of oil, gas or electric furnaces.Must use with sub-base.
Part Number Price1-9127450 $52.36
SUB-BASE by
HONEYWELL This sub-base for use with the T87F thermostat.Has cool, heat, and off positions with fan on-auto positions.
Part Number Description Price1-9129340 SINGLE TRANSFORMER HTG-CLG $39.901-9179230 INDEPENDENT HTG-CLG CIRCUITS $36.24
HEAT-COOL THERMOSTAT by ROBERTSHAW (Manuel Changeover)
This top of the line, high quality thermostat has a SPDT hermetically sealed-in-glass switch to protect it from arcing and to seal out dust and moisture. Adjustable heat anticipator setting from .18 to 1.0 amps. Ideal for controlling allheating-cooling systems with 24 VAC controlsystems up to 1.5 amp max. The segregated circuit sub-base has heat, cool, off positionswith fan on-auto positions. Temperature settingsrange from 48 deg. F to 86 deg. F. Has thermometer on face of thermostat.
Part Number Price1-6242920 $39.00
HEAT-COOL THERMOSTAT by GENERAL ELECTRIC
(Manuel Change-over)
Thermostat provides 24 volt control of 1-stage heat and 1-stage cooling in control circuits up to1.5 amps, and in systems that requires the indoor fan circuit (G terminal) to be energized in the heating mode. Contacts are sealed in a glass tube. Provides heat, off, cool system switching, with fan auto-on control. Adjustable heat anticipator from .18 to 1.0 amps. Has Trane logo on cover. Thermometer on cover.
USED ON TRANE’S BWE, BEV, & TEV SERIES
Part Number Price1-BAYSTAT305 $20.00
HEATING THERMOSTAT 24 Volt 2-Wire White-Rodgers
This two wire, snap action contact, 24 volt heat only wall thermostat has a positive off feature at approximately 45degree F. Adjustable heat anticipator setting is from .15 to 1.2 amps. May be used on oil, gas and electric furnaces. White body.
(Manual Changeover) Thermostat provides 24 volt control of 2-stage heating, 1-stage cooling of heat pump systems which energizes the reversing valvein cooling mode. Provides Em. Ht., heat, off, and cool systemswitching and auto-on fan control. Has Emt. heat and Aux. heatlights on base. Temperature range is from 50 deg. F. to 80 deg. F.Has fixed anticipation on all stages. Has thermometer on frontcover. Intertherm logo on cover.
USED ON NORDYNE’S “T” SERIES
Part Number Price1-9129300 $76.62
HEAT PUMP THERMOSTAT FOR
COLEMAN/EVCON By GENERAL ELECTRIC
(Manual change-over) Thermostat provides 24 volt control of 2-stage heating, 1-stage cooling of heat pump systems. Has heat, off, cool, and Em. heatsystem switching and auto-on fan switching. Has Aux. Heat & Em.Heat lights. Temperature range is from 50 deg. F. to 90 deg. F.Has adjustable anticipation on first stage of heat only, .18 to 1.0amp. Has thermometer on cover.
USED ON COLEMAN/EVCON 3600 SERIES
Part Number Price1-3600-367P $79.00
HEAT PUMP THERMOSTAT by
GENERAL ELECTRIC (Manual change-over)
This thermostat has much the same design and specifications as the3600-3671 thermostat, but, does not have Aux. heat light, and hasfixed anticipation on all stages.
USED ON COLEMAN/EVCON HEAT PUMP MODELS: 3300A, 3200-3200D, 3360-601, 3400, 6000, AND 6500 SERIES
HEAT PUMPS.
Part Number Price1-3300-377P $163.42
HEAT PUMP THERMOSTAT by UTEC
Digital Manuel Change-Over This is a wall mount, low voltage 2-stage heat, 1-stage cool heat pump thermostat that energizes the reversing valve in the coolingmode. Thermostat requires no batteries, is not a power stealingdevice and must have both R and C wires connected. Temperatureand mode settings are preserved with the power off. Systemselections are off, heat, cool and emergency heat, continuous fanor fan off. There is a built-in 5 minute time-delay once system has shut down before it will restart. This feature can be overridden onecycle at a time. A cycle timer allows for four cycles per hour or onecycle every fifteen minutes. Once the system starts it will remainon for three minutes regardless of demand, however, a change in set point or mode will shut the system down. There is a fifteenminute delay between first and second stage operation, however, ifthere is a heating demand greater than five degrees there is only athree minute delay between first and second stage. Room temperature is constantly displayed on LCD until a change in modeof operation or temperature is activated, display will change backto indicate room temperature if no buttons are pushed in fiveseconds. This is an incredible device for the money.
Thermostat provides 24 volt control of 2-stage heating and 1-stage cooling of heat pump systems that energizes the reversing valve incooling mode. Provides Em. Ht., heat, off, cool system switching, and auto-on fan control. Has Aux. Ht. light and Em. Ht. light oncontrol panel. Temperature range is from 50 deg. F. to 90 deg. F.Has fixed anticipation all stages. Has thermometer on front cover.Trane logo on cover. Part Number Price1-BAYSTAT239 $65.00
UNIVERSAL THERMOCOUPLES
Replaces all common thermocouples.Copper tube body. Adapters included.
Part Number Description Price1-3125 18" $5.791-3126 24" $5.391-3127 30" $5.981-3128 36" $6.591-3129 48" $8.69
THERMOSTAT WIRE Part Number Description Price1-3133 20-3, PER FT., 500 FT/ROLL. $0.151-3136 20-5, PER FT., 250 FT/ROLL. $0.261-3135 20-8, PER FT., 250 FT/ROLL. $0.35
We are the Largest AuthorizedDistributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the EastCoast. We stock repair parts forColeman/Evcon Heating-Cooling products. We are one of the oldest Nordyne,Intertherm Brand Distributors inthe Nation. Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and HeatPump Parts.
Solid 2” Thick Pre-Cast Concrete Part Number Description Price1-24241 24" x 24" x 2" $17.201-30301 30" x 30" x 2"1-32321 32" x 32" x 2"1-36361 36" x 36" x 2" $32.001-36481 36" x 48" x 2"1-42641 42" x 64" x 2" $55.00
AIR CONDITIONER PADS by PolyVule
“The Black Pad”
Made from recycled automobile tires andrecycled plastics. Quiet, absorbs 60%more vibration than plastic pads. Resistsbreakage and is UV stable. Strong, moredurable than concrete and is light weight.Limited lifetime warranty.
Part Number Description Price1-24242 24" x 24" x 2" $14.981-32322 32" x 32" x 2" $29.95
AIR CONDITIONER PADS Cladlite
This pad has the appearance andperformance of real concrete at 20% ofthe weight of conventional concretepads. The cladding provides superiorresistance to sun, moisture and freeze-thaw conditions. The polystyrene isvirtually impervious to water, soilconditions, fungus and bacteria. Stockedin 2” thick pad only.
Part Number Description Price1-32323 32" x 32" x 2" $34.00
ANTI-VIBRATION PAD Has a solid cross-ribbed design with acork center. Made of high qualityelastomeric materials compounded forexcellent resistance to aging,compression set and oil. Maximumloading capacity: 50 lbs. per square inch.Total thickness is 7/8". Excellent for usebetween air conditioner and concrete padto reduce noise and vibrations.
Part Number Description Price1-3040 3" x 3"x 7/8" $1.29
REFRIGERANT LINESETS
1/2" Thick Insulation
Plain EndsPart Number Description Price1-3508 20' Long - 3/8" & 3/4" $127.121-3510 30' Long - 3/8" & 3/4" $166.001-3514 30' Long - 3/8" & 7/8" $201.001-3511 40' Long - 3/8" & 3/4" $221.001-3512 50' Long - 3/8" & 3/4" $269.001-3516 50' Long - 3/8" & 7/8" $330.00
HANGER STRAP FABRIC 1-3/4" x 300 FT.
1-3/4" wide fabric hanger strap is ideal for hanging flexible duct. Has 440 lb. tensile strength. Black color.
Part Number Price1-3275 $9.98
CARTRIDGE FUSES Time Delay
250 Volt AC - HAC-R Rated Non-Renewable Element
Part Number Description Price1-3241 30 AMP $2.981-3242 35 AMP $4.981-3243 40 AMP $4.981-3244 50 AMP $4.981-3245 60 AMP $4.98
COIL CLEANER Foaming Spray
Heavy duty water based foaming coil and fin cleaner. The powerful foaming blast cleans and degreases air conditioning and refrigeration condenser & evaporator coils. Contains no solvents, acids or alkalies. Safe for aluminum fins and copper coils. Does not use any CFC’s. 18 Oz. net weight.
1-9006310 BLOWER ASSEMBLY (2 THRU 4TONS) Intertherm’s MSH & MGHseries furnaces without an “A” inthe model number
911030 $239.70
1-9034330 BLOWER ASSEMBLY (2 thru 4tons) Intertherm’s M1 series oiland gas furnaces
903413 $306.16
1-9034340 BLOWER ASSEMBLY (2 thru 5tons) Intertherm’s M1 series oiland gas furnaces
903414 $209.95
1-505261 BLOWER ASSEMBLY (2 thru 4tons) Adaptable to several models& brands of electric furnaces. Motor specifications: 1/2hp, 230v,3-spd, 1075 rpm 3. amp, cwrotation looking at shaft, 10 mfdcapacitor, 3-mounting brackets.GE# 5KCP39JGR433 S.
ASPEN &MORTEX
$183.00
1-1468-120P BLOWER ASSEMBLY (HeatingOnly) Colemans 3500 and 3500Aseries electric furnaces.
3500-5901 $188.68
1-024-24504-700
BLOWER ASSEMBLY (AC ORHeat Pump, up to 4 ton)Coleman's 3500 and 3500Aseries electric furnaces.
3500-6901 $302.37
1-024-27651-000
BLOWER ASSEMBLY (AC ORHeat Pump, up to 4 ton)Coleman's 3500, 3500A, EBxxAand EBxxB series electricfurnaces.
3500-6901/A
$174.45
We stock repair parts forColeman/Evcon Heating-Cooling products. We are one of the oldest Nordyne,Intertherm Brand Distributors inthe Nation.
FLEXIBLE DUCT For outdoor low and mediumpressure systems. Has steel wirehelix. Thick fiberglass insulation.Designed for mobile home use.Has heavy one-piece black outervinyl cover. Sold per ft. in 25 ft. lengths.
Part Number Description Price1-3258 10" x 1’ $2.191-3259 12" x 1’ $2.361-3260 14" x 1’ $2.701-3261 16" x 1’ $2.99
Part Number Description Price1-3263 10" x 1’ $2.191-3264 12" x 1’ $3.40
NOTE: Duct with R-6 insulation must be used for crossover connections where the duct is exposed below the vapor barrier. All package units must use duct with R-6 insulation, any part of the duct that is outside the curtain wall (underpinning) must have R-8 insulation.
1-3265 14" x 1’ $3.98
DUCT TIES HEAVY DUTY
NYLON
175 lb. tensile strength. Self-locking.
Part Number Description Price1-3272 6" DIAMETER THRU 10" DIAMETER $0.591-3273 12" DIAMETER THRU 14" DIAMETER $0.79
DUCT TO REGISTER CONNECTORS
Made of light weight metal. Comes broken down (flat), simply cut to desired height, fold and secure tabswhen ready to use.
Part Number Description PriceALUMINUM
1-2869 4" Wide x 8" Long x 6" High $3.491-2870 4" Wide x 10" Long x 8" High $3.981-2871 4" Wide x 12" Long x 8" High $5.15
GALVANIZED STEEL1-2873 4" Wide x 8" Long x 6" High $2.671-2874 4" Wide x 10" Long x 6" High $2.69
CHIMNEY PIPE WOOD BURNING FIREPLACES
The interior pipe is 8 inches diameter and is made of stainless steel, outside pipe is 12-1/2 inches diameter and is made of galvanized steel. Has centering tabs on one end to ensure that inner pipe remains the proper distance from the outside pipe.
Part Number Description Price1-2915-18 18" LONG (17-1/2" Actual length) $43.001-2915-24 24" LONG (23-1/4" Actual Length) $69.001-2915-36 36" LONG (35-1/2" Actual length) $89.00
STORM COLLAR FIREPLACE FLASHING
Made of galvanized steel for 12-1/2" diameter chimney pipe.
Part Number Price1-2920 $13.98
FLASHING FIREPLACE CHIMNEY
Made of heavy gauge galvanizedsteel. For roofs with a pitch of 0-6/12. For 12-1/2" diameter pipe size.
Part Number Price1-2922 $39.00
TOP CAP ASSEMBLY FIREPLACE CHIMNEY
Cap is made of galvanized steel and is 15-1/2" diameter, outer pipe is 12-3/4" diameter. Fits 8" diameter flu pipe. Overall height of assembly is 15 inches. Thimble that fits over 8" flue pipe is made of stainless steel.
Part Number Description Price1-3278 10" DIA. $4.391-3279 12" DIA. $4.98
METAL REDUCER Galvanized Steel
Part Number Description Price1-3280 7" x 5" $3.981-3281 7" x 6" $3.791-3282 8" x 7" $3.981-3283 10" x 8" $0.001-3284 12" x 10" $5.991-3285 14" x 12" $8.95
Part Number Description Price1-3297 10" DIA. $2.191-3298 12" DIA. $3.491-3299 14" DIA. $5.69
V-BOX
Top of box is 14-1/2" x 14-1/2". Hasround duct collars each side of “V”.Has 1/2" thick duct liner glued toinside of galvanized metal to preventsweating.
Part Number Description Price1-9019850 10" DIA. COLLARS $62.111-9021490 12" DIA. COLLARS $63.65
We are the Largest AuthorizedDistributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the EastCoast. Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and HeatPump Parts.
SINGLE WIDE KIT: Kit to connect packaged units to a single section home. (See items marked “3" in diagram). Includes: One 14" x 14" sq. x 12" dia. round return box with filter and grill. One supply adapter with 12" dia. round duct connection. Has automatic air damper.
Part Number Price1-9114680 $48.00
DOUBLE WIDE KIT: Kit to connect packaged units to a double section home. (See itemsmarked “3" in diagram). Includes: One 14" x 14" sq. x 12" dia. round return with filter and grill. Two supply adapters with 12" dia. round duct connection. Has automatic air dampers.
Part Number Price1-9114690 $109.00
WYE Galvanized steel
(See item marked “1" in diagram).
12" x12" x 12" wye with 2 metal worm gear type clamps.
Part Number Price1-9114700 $38.29
SINGLE WIDE SUPPLY / RETURN KIT
Comes with one supply adapter that has a 9"wide x 13"long trunk duct opening and 12" round flex duct connector. It has a hinged close-off damper. Metal return box is 12" x 20" x6" deep with a 12" round or 14" oval flex duct connector. Has a washable 16" x 20" air filter. Has a brown heavy duty 12" x 20" floor grill.
Part Number Description Price1-3400 12" x 20" x 12" Round Kit $89.001-3401 12" x 20" x 14" Oval Kit $89.00
DOUBLE WIDE KIT: To make a double wide kit add to the single wide kitone each of the following: Items listed below.
Part Number Description Price1-3405 Supply Adapter $29.951-3410 Wye - 12 x 12 x 12 $26.85
SUPPLY ADAPTER
GALVANIZED STEEL Has 9"wide x 13"long trunk duct opening and a 12" round flex duct connector. Has a hinged automatic close-off damper.
Part Number Price1-3405 $29.95
WYES
GALVANIZED STEEL
Part Number Description Price1-3407 8" x 6" x 6" $8.691-3408 10" x 8" x 8" $8.981-3409 12" x 10" x 10" $13.001-3410 12" x 12" x 12" $26.85
This coil cabinet is designed forcounter flow (down-flow) gas & oilfurnaces.
23-3/4" Deep with door in place. 20-1/2" Coil Area Depth. 19-3/4" Wide. 19" High Coil Area.
Door is painted white to match furnacedoor.
Part Number Price1-9119690 $115.00
COIL CABINET FOR
E-SERIES ELECTRIC
This coil cabinet is designed to fit on topof a down-flow furnace and on thebottom of an up-flow furnace.
23-3/4" Deep. 20" Wide. 29" High.
Door is painted white to match furnacedoor.
Part Number Price1-9029760 $152.00
ATTIC VENT Roof Mount
Galvanized steel attic vent operateson 115 volt AC and moves 100CFM (cubic feet per minute) of air.Humidity and temperaturecontrolled. Fan comes on whentemperature reaches 105 degrees For humidity reaches 70 percent RH.Fan goes off when temperature fallsto 90 degrees F or 62 percent RH.May be mounted on a flat or slantroof. See diagram at left fordimensions. Roof cap is soldseparately.
Part Number Description Price1-3430 ATTIC VENT $60.001-3432 CAP ASSEMBLY $23.39
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and HeatPump Parts.
We are one of the oldest Nordyne,Intertherm Brand Distributors inthe Nation.