stormor shelving NEW ®
stormor shelvingNEW
®
We recognise that as markets and legislation
change, so do the demands this places on
our product range.
For example,
� Compliance with the new Freedom of
Information Act and the Data Protection Act
is now a legal requirement
� Both Acts demand quick and easy location
and retrieval of information
� Full access rights come into force in
January 2005
Similarly, as our economy becomes
increasingly reliant on the service sector,
volumes and methods of data storage
increase. Records in commercial sectors such
as finance continue to grow and quick,
easy-to-use filing systems help in the
provision of rapid-response customer service.
Changes such as these drive our product
development.
understandingfuture requirements
anticipatingyour needsInnovation in design is the key to ensuring our
products meet these demands. Essentially,
the goal is a shelving solution which makes
optimum use of all available space whilst
satisfying the huge range of demands posed
by the many different products and data
records which need accessible storage.
The challenge was to incorporate these
changing demands into a new shelving
system without compromising load capacity
and safety. Key design criteria were:
� Versatile, easy to install shelving with
minimum lost storage space
� A system sufficiently adaptable to
accommodate any product
� Comprehensive range of shelf and frame
sizes for both general and specific
requirements
� Easy-fit accessories to complement basic
components
� Minimum number of components with
maximum interchangeability
designing simply and efficiently
deliveringthe right solutionThe Stormor Shelving System:
� Slim profile shelves and frames
� Family of frames suitable for storage
needs from the commercial to the
workshop environment
� Clip-in accessories
� Tiered projects still
available by combining the
new shelves with the tried
and trusted Euro frame
Stormor - creating optimisedstorage solutions
Solo FrameSolid frame featuring a delta profilefront post with a T-section rear foreasy and immediate fitting of crossbracing and cladding.
Mono FrameClear entry, open shelving frame forheavier duty applications and where ventilation is required.
Duo FrameDouble skinned box section, clearentry frame. Also allows clear accessto the full shelf width, eliminating‘snagging’ of items stored. Complieswith clear access requirements ofBS5454.
Cross BraceProvides stability bracing for openback shelving. Used where rearcladding is not specified.
Rear Cladding Mesh CladdingCan be fitted to open frames and asrear cladding for all frame types.Retains visibility and ventilation for theitems stored.
Dual Use Shelf25mm section shelf with a formed openflange. Also carries suspension filingunderneath the shelf at appropriatedepths. Fits all above frames plus theEuro shelving frame.
Box Section Shelf25mm welded box section shelf onthe front and back edges for greaterload bearing capacity. Fits all aboveframes plus the Euro shelving frame.
Under-shelf DividerDivider simply clips in under the shelfto hold books, files etc upright. Dividercan be re-positioned as required. Foruse with Dual Use shelves only.
Vertical DividerUsed to divide shelves horizontallyinto smaller storage compartments.Reinforced leading edge providesextra strength. Easily repositionedon shelf.
Document DividerSlim profile divider ideal for paper andrecord storage. Ensures maximumuse of shelf capacity. Easily relocatedon shelf.
Part Height Dividers150mm high divider which slots either on top or below the shelf toprovide storage compartments orsupport for files and similar tallmaterial.
Solid interlocking steel sheets thatenclose the rear of the bay. Also givesessential stability to the bay structureas an alternative to cross-bracing.
1
17
Stormor ShelvInterchangeable Frames� 20mm front face � 25mm shelf pitch � Accepts double shelf clip� Frames share common shelf types, rear bracing, cross-bracing and accessories
Shelf Dividers� For dividing shelves into compartments � No additional fixing clip required� Slot into pre-punched holes in shelf
1 2 3
4 5 6
7 8 9
10 11 12
®
24 6
7 8
24
9
10
11
12
16
1413
18
23
19
22
ving - Creating optim
UPRIGHTS
STORMOR GREY*RAL 7035
Standard C
Pull-out Reference ShelfProvides a flat and stable worksurface for document or filereference within the aisle.
Back StopFits across the rear of bays toprevent files falling off the back of ashelf. Simply slots into the upright.
Half Height Door KitHinged 1100mm high door. Createssecure storage cupboard withinshelving. Doors are stiffened to the fullheight and have 2-point locking,recessed handle and safety key.
Plastic DrawersIdeal for the storage of small items.Available in 3 sizes, the drawers tilt onintegrated back-stops to allow easyviewing and access. Can also besub-divided internally using dividers.
3
5
0
15
20
21
mised storage soluti
* Denotes colours available on Speedrange. Swatches shown give an approximate colour guide only.
SHELVES
RACING GREENRAL 6005
SUAVE BLUE*BS 5252 20 E 56
GRAPHITE GREY*BS 5252 18 A14
MARINE BLUERAL 5001
TRAFFIC REDRAL 3020
STORMOR GREY*RAL 7035
Pull-out Accessories� Clip-in ball bearing supported runn� 100% extension for full access to s
13
16
19
22Component Colours
Pull-out DrawerIdeal for the storage of CD's, electronicmedia and other small items within ashelving bay. Available in 4 heights.
Frame Floor Clip
Full Height Door KitHinged doors transform shelving intoa secure storage cupboard. Doorsfeature full height vertical stiffener, 2-point locking, recessed handled and safety key.
Bin FrontsWhen fitted these prevent items fallingoff the front of shelves. Also whenused with shelf dividers they formenclosed compartments or ‘bins’. Canbe used as heavier duty back-stop.
Simple clip-in bracket which allows alltypes of Stormor frames to be floorfixed. Can be shimmed by usingStormor shim plates. Fits within bayfootprint.
Pull-out Filing CradleCan accommodate A4 and foolscaptop loaded suspension files.
Floor Plinth
Tambour Door KitRoller shutter doors for security anddust protection of items stored. Whenopen, door does not protrude intoaisle making this an ideal solution forsecure storage where aisles are narrow.
Clip-in Garment HangingSystem of rails and brackets which fitwithin bay widths to allow the hangingof garments. Rails can bere-positioned as required to createdouble hanging space.
Floor plinths prevent dust and debriscollecting under the shelving. Simplyclips to the underside of shelf tocreate a smooth overall finish of thefront face.
ionsners with integral stops � Fit all frame typestored material � Easily repositioned � No fixings required
NEW Stormor is now available to solve all shelving
problems:
� General office storage
� Dedicated office filing solutions
� Large archiving projects
� Specific demands such as healthcare records
� Heritage storage
� Retail storage
� Bulk off-site storage
� Workshops and stockrooms
� Industrial storage
� Dedicated interface with our own mechanically
assisted or electrically powered mobile systems
to truly maximise space utilisation.
All accessories fit in all shelves, and all shelves fit in
all frames. The comprehensive range of sizes and
accessories ensures Stormor makes specifying and
building shelving easier and quicker for more
versatile solutions.
Every project is designed to meet its specific
requirements, optimising storage space and
minimising waste.
14 15
17 18
20 21
23 24
storage solutions
For further information on these products, please contact your local distributor:
Stormor Shelving is only one element in our comprehensive portfolio. We can also provide:-
MOBILE SHELVING PALLET RACKING JUST SHELVING
HEAVY DUTY SHELVING ANGLE AND SQUARE TUBECONSTRUCTION SYSTEMS
SMALL PARTS STORAGE
MULTI TIER SHELVING PERSONAL STORAGE COMMERCIAL AND WORKPLACEEQUIPMENT
Member Company
Member CompanyCertificate No. FM 09409
Note: This publication shows general concepts only, and should not be used as a guide for specific design or assembly purposes. We reserve the right to alter the specification on any of these products, in the customer’s interest, without prior notification.