NEW PRODUCTS SPECIAL OFFERS - Sykes-Pickavant

NEW PRODUCTS SPECIAL OFFERS

www.sykes-pickavant.com

Specialist Tool Solutions

APRIL - JUNE 2016

Proud to be supporting our chosen

cancer charity

CHARITYISSUE

FLUID HANDLING Tel: 01543 679900 www.sykes-pickavant.com

1

Pneumatic Oil Extractor with 9 Litre Inspection Chamber• Includes inspection chamber providing visual assurance that the suction facility is operating correctly • Waste oil becomes immediately visible in the chamber allowing the user easy assessment of the oil• Includes anti splash device

53390000IDEAL FOR VEHICLES WITHOUT A SUMP PLUG

£269.00

£325.00

53390500

Pneumatic Oil Extractor

Pneumatic Oil ExtractorsDesigned to meet the requirements of the modernworkshop as well as health & safety issues• Remove and extract waste fluids or oil from an engine • Combined volume capacity of 90 litres (70L tank & 20L drain bowl) • Works best at oil temperatures between 40-60° with suction speeds of up to 6 litres per minute• Visible fill level indicator • Powered from compressed air• Working pressure 8-10 Bar• Empty tank with compressed air at max. 1 bar pressure• Includes: - Adaptors for BMW, Mercedes, VW and Citroen - 4 x 700mm nylon tube probes with internal spring steel anti-kink wires - 2 x 700mm steel probes

WARNING: Do not use with corrosive or inflammable products

STAINLESS STEEL 45L TANK36600500

36600700

Fuel Extractor / Retriever• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc• Emptying via tank filler neck or fuel lines

£448.95

Adaptor Set • Set of fittings to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel

£24.95

During this quarter (April - June 2016), for every product sold that features the green symbol, we will donate the indicated amount to our chosen cancer charity. For further details regarding our fundraising activities, please visit: www.sykes-pickavant.com

33165000Speedfiller• For replacing the coolant after opening or draining the system• Eliminates airlocks during refilling through the use of vacuum• Includes multi-fit cone & adaptor to connect to ‘315’ Series kits

£134.95

66050400Vehicle Fluid Change Syringe - 0.2L • Composite plastic for brake fluid & antifreeze

OFFER £15.95SAVE £9.00

LIST PRICE £24.95

0.2L 1.5L66095100Vehicle Fluid Change Syringe - 1.5L• Ideal for applications such as engine / gear oil & differential fluid

OFFER £39.95SAVE £10.00

LIST PRICE £49.95

Sykes-Pickavant are proud to be supporting our chosen cancer charityHere at Sykes-Pickavant, it affects us all when one of our colleagues is living with cancer. So this year we are delighted to be supporting our chosen cancer charity, who in turn will provide support and inspiration to our colleague and their family during this time of need. Please support us in our annual fundraising activities - not just for our colleague but for everyone who is affected by cancer.For further details regarding our fundraising activities during 2016, please visit our website: www.sykes-pickavant.com

During this quarter (April - June 2016), for every product sold that features the green symbol (right), we will donate the indicated amount to our chosen cancer charity.

£1 CHARITYDONATION

CHARITYDONATION

CHARITYDONATION

TORQUE

2

800400SP

800500SP

800550SP

8005CASE

‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench• 150 - 700 Nm / 100 - 500lbs.ft • Length: 1150mm • Weight: 6.30kg

‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench• 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • Weight: 7.30kg

‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench• 1” Sq. Dr (uses ¾” to 1” stepped convertor)• 700 - 1500 Nm / 500 - 1000lbs.ft• Length: 1475mm • Weight: 10.40kg

Torque Wrench Case • Rugged blow moulded case suitable for 80040000 / 80050000 / 80055000 Note: Torque wrench not included

£29.99

INCLUDES FREE CASE - SEE BELOW



80030000

80033000

80039900

‘Motorq 300’ - 1/2” Push-Thru Torque Wrench• 60 - 300 Nm / 45 - 220lbs.ft • Length: 570mm • Weight: 1.40kg



OFFER £137.95SAVE £28.00

LIST PRICE £165.95

OFFER £144.95SAVE £38.00

LIST PRICE £182.95

OFFER £214.95SAVE £43.00

LIST PRICE £257.95

80010000 80020000‘Motorq 100’ - 3/8” Push-Thru Torque Wrench• 20 - 100 Nm / 15 - 80lbs.ft • Length: 353mm• Weight: 0.73kg

‘Motorq 200’ - 1/2” Push-Thru Torque Wrench• 40 - 200 Nm / 30 - 150lbs.ft • Length: 442mm • Weight: 1.01kgOFFER £109.95

SAVE £22.00LIST PRICE £131.95

OFFER £124.95SAVE £26.00

LIST PRICE £150.95

£402.00

£412.00

£618.00


CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

COOLING Tel: 01543 679900 www.sykes-pickavant.com

3

6 PACK SPECIALSAVE £4.75!

6 x 250ml of Standard Reaction Fluid

Combustion Leakage Testers• Fast and accurate diagnosis of cylinder head gasket leaks • Suitable for use with both Petrol & Diesel engines• Supplied with standard and sensitive reaction test fluid (100ml)

33195000 33145500 33145000Combustion Leakage Tester • Quick connector for use with: 315 / 316 / 317 Series Cap Adaptors

Universal Combustion Leakage Tester• Quick test combustion leakage tester• Features 25 to 50mm cone

XL Combustion Leakage Tester• For use with HGV, commercial and plant engines• Quick connector for use with 33140000 and 331400V2 cap adaptors

£69.95

£99.95

£84.95

Reaction fluid also available to purchase individually: 33194200 - Standard 250ml and 33194400 - Sensitive 250ml

331942SP

331595V2SP 331400V2‘315’ Series Cooling System Pressure Test Kit PLUS Cooling Cap Set (33159800)• Includes:- Hand Pump with Pressure Gauge & Quick-Release fitting- Hose Assembly c/w quick-release fitting- 16 x Threaded Cooling System Cap Adaptors- 3 x Bayonet Fitting Cooling System Cap Adaptors- 1 x Cap Adaptor wrench

XL Cooling System Pressure Test Kit Updated kit includes additional caps covering more:DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and Agricultural vehicles• Includes:- High capacity metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting- Hose Assembly c/w quick-release fitting- 10 x Reservoir & Radiator pressure caps

Cooling System Pressure Test KitsProvides an effective solution when pressure testing the cooling system to help locate internal & external leaks

NEW LOWER PRICE& MORE APPLICATIONS!

OFFER £199.95SAVE £100.00

LIST PRICE £299.95

OFFER £249.90SAVE £90.00

LIST PRICE £339.90

COMBINED OFFER!

+33159800

Cooling Cap Set• Set of 2 additional cap adaptors to update 331595V2 kit• Applications include: BMW, Chevrolet, Mini, Saab & Vauxhall

Note: Full application details can be found on our website: www.sykes-pickavant.com

31370000Combined Petrol & Diesel Cylinder Leakage Tester Kit• Provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders• Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets• Includes a selection of glow plugs and an adjustable dummy injector • Supplied with M12 and M14 brass quick release spark plug adaptors

FOR BOTH PETROL & DIESEL ENGINES

31370500 Petrol only Cylinder Leakage Tester Kit• As per kit above excluding glow plugs & dummy injector

£249.95£149.95


LIST PRICE £29.70


CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

AIR TOOLS

4

Combustion Leakage Testers• Fast and accurate diagnosis of cylinder head gasket leaks • Suitable for use with both Petrol & Diesel engines• Supplied with standard and sensitive reaction test fluid (100ml)

XL Cooling System Pressure Test Kit Updated kit includes additional caps covering more:DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and Agricultural vehicles• Includes:- High capacity metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting- Hose Assembly c/w quick-release fitting- 10 x Reservoir & Radiator pressure caps

‘Vibro-Impact’ Air Hammer• A unique concept to aid the removal of seized suspension parts• The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer• Allows the operator to control & gradually increase the force being applied, in order to loosen seized components• Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied• Low vibration for user comfort

‘Vibro-Impact’ Pin Set - 6 Pc.• Sizes: 5.2mm, 6.5mm, 6.9mm, 7.7mm, 9.3mm and 12.7mm

‘Vibro-Impact’ Socket Set - 7 Pc.• Designed to untighten seized screws, nuts or glow plugs without any damage• To be used with ‘Vibro-Impact’ air hammer (90206000 - see above)• Suitable for bolts, screws, rounded lugs, glow plugs, clamp-on injectors• Vibro-shaft 3/8” square drive• Special impact sockets with internal edge: 8, 9, 10, 11, 12, 13, 14mm

OFFER £267.00SAVE £68.00

LIST PRICE £335.00

90206000

90225000 90229000

BESTSELLER

TO BE USED WITH ‘VIBRO-IMPACT’ AIR HAMMER

Part No. Drive Max Torque Nm (Reverse)

Torque Nm(Fwd)

Noise(dBA)

Air Consumption(l / min)

Weight(kg) Price

90201000 1/2” 1600 1084 94.2 135 1.8 £179.0090201500 (Mini) 1/2” 680 500 93.5 130 1.08 £169.00

90201300 (Ultra-Short) 1/2” 680 500 95 134 1.3 £159.00

90202000 3/4” 2600 2000 97 210 3.2 £499.00

90202500 3/8” 680 500 93.5 130 1.08 £169.0090203500 1/4” 90 90 98.2 105 0.9 £139.00

90204500 1” 3100 2200 110 305 6.8 £849.00

Impact Wrench Specifications: High Quality Air Tools that set the standard for Torque!

Micro Die Grinder• Powerful mini device for small / fine grinding & milling• 1/8” drive / 70,000rpm• Ideal for work in confined spaces

90213000 £79.95£99.95Micro Die Grinder Bit Set (5 Pack)• For use with Micro Die Grinder (left)• Contains five shaped ends suitable for precision work

90213500

Part No. Ref. Length Diameter Price

902135-01 40mm 3mm £46.95

902135-02 33mm 3mm / Sphere - 4mm £53.95

902135-03 40mm 3mm £46.95

902135-04 40mm 3mm £46.95

902135-05 40mm 3mm £46.95

Individual Bits (3 Pack) also available SPECIAL PACK DEAL

£39.95

NEW NEW

IDEAL FOR CUTTINGBEARING CASES &

LOCKING WHEEL NUTS

£89.95


CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

Universal Glow Plug Tip Extraction Master Kit• Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Includes all the necessary tools (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) to safely remove the terminal part of the glow plug electrode without damaging the cylinder head

£139.00

DIESEL GLOW PLUG Tel: 01543 679900 www.sykes-pickavant.com

5

08594000Universal Glow Plug Removal Master Kit• Complete set for removing broken glow plugs: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25• Kit includes 4 x special milling cutter tools (3 pcs with 4 cuttings and 1 pc with 2 cuttings) with self-centering helicoidal tip for universal use - Individual centering adaptors are not required • Quick and easy removal - also allows the user to restore the thread for installation of the new glow plug

Specifications: Dimension A ≥ 14mm (M10) Dimension A ≥ 20mm (M9, M8) Dimension L ≤ 13mm L (thread)

08596100

08596800

Glow Plug Tip Extraction Kit - M10 x 1.0• Suitable for M10 thread size

Universal Glow Plug Removal Kits4 x special milling cutter tools with self-centering twist drill bit for universal use without the need for any dedicated centering aids

Glow Plug Tip Extraction Kits - M8, M9 & M10Suitable for removing the final part of the electrode in case of breakage / seizure of the glow plug inside its seat

£849.00

NEW

Part No. Glow Plug Size Dimension A ≥ Dimension L ≤ Price

08594100M10 x 1.0 / M10 x 1.25

14mm 13mm £485.00

08594900 M9 x 1.0 20mm 13mm £365.00

08594800 M8 x 1.0 20mm 13mm £365.00

£275.00 £139.00

NEW

NEW

NEW

085900V2Vibro Impact Glow Plug Remover Set • For the effective removal of 8, 9, 10, 11 & 12mm glow plugs• Uses controlled impact torque to create vibration • Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm)• Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access

OFFER £215.00SAVE £44.95

LIST PRICE £259.95

Square Drive ¼”

Max Torque - Right 40Nm

Max Torque - Left 10 / 20 / 30 / 40Nm

Air Inlet ¼”

Air Consumption 250 ltrs / min

Speed 12,000 per min

Air Supply 6.3bar / 90psi

Glow Plug Tip Extraction Kit - M8 & M9• Suitable for M8 sized glow plug tips • Also suits M9 glow plug tip removal by using the same M8 size in the slightly larger M9 female thread of the cylinder head

08596000

UNIVERSAL KIT


CHARITYDONATION

£2 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

Hydraulic Injector Puller Kit c/w Hydraulic Pump and FREE DieselInjector Seat Cleaner Set • Provides controlled force to aid the removal of seized / stubborn injectors where there is insufficient access for traditional slide hammers• Includes a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines• Supplied with injector adaptors for most modern injector types • 10 tonnes Hydraulic Hollow Cylinder provides the force• Includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler

INJECTOR SERVICE & REMOVAL

6

185800V2P1

185800V2 185810V2Hydraulic Injector Puller Kit only• As per 185800V2P1 (above) excluding hydraulic pump and free Diesel Injector Seat Cleaner Set

Mechanical Hydraulic Injector Puller Kit • As per 185800V2 kit (left) but includes a mechanical hydraulic ram• Allows use of the kit without the need for a separate hydraulic pump£999.95

OFFER £1295.90SAVE £386.00

LIST PRICE £1681.90

OFFER £1099.95SAVE £100.00


18584000

08585000Heavy Duty Slide Hammer Injector Removal Kit• For the removal of Bosch, Delphi Denso and Siemens injectors• Features a flexible u-joint adaptor for access in restricted areas• Includes 6 x Injector adaptors, 4 x Injector Solenoid removers and 2 x Nozzle Extractors

OFFER £245.00SAVE £50.00

LIST PRICE £295.00

Universal Injector Vibration Tool NEW

£449.00

Scan the QR codeto watch a video

of the tool in action

FREE! DIESEL INJECTOR SEAT CLEANER SET (017500V2 - WORTH £219.00 See page 11 for details)

WHEN YOU PURCHASE 185800V2P1

FREE!

• Specially designed tool to assist in the removal of stubborn injectors • To be used in conjunction with any suitable injector puller or slide hammer• Includes universal clamp to attach to pulling spindle or injector pulling adaptors where space allows• The main body can be rotated to 4 positions on the horizontal and 4 positions at an angle • Fully adjustable clamp and can be used with or without the tension springs provided• Can be attached and locked in place with the two adjustable locking handles • The tool can be used whilst the injector is under hydraulic / mechanical tension or before tension is applied • The tool can also assist in other pulling applications


CHARITYDONATION

£1 CHARITYDONATION

£2 CHARITYDONATION

INJECTOR SERVICE & REMOVAL Tel: 01543 679900 www.sykes-pickavant.com

7

NEW08555000

08552000

08551400

18582700

Injector Extractor Kit - Toyota• To aid the removal of seized / stubborn Denso injectors• Parts of the kit can be mounted together around an injector creating a stable mount for the slide hammer to fix onto - Compact slide hammer allows for use on an engine in-situ• Suitable for Toyota, Nissan, Mazda, Opel / Vauxhall and Lexus

Injector Extractor Kit - PSA Group• For removing injection nozzles on 2.0HDI and 2.2HDI - PSA group• Removes tightly fixed injector nozzles without dismantling the cylinder head• Injectors (Bosch / Siemens) can be removed simultaneously• Includes bracket and 6 x screws • Suitable for Peugeot, Citroen, Fiat & Lancia• Engine Codes: DW10: RTH, RHW, 4HW, RHT, RHM, RHR, RHK DW12: 4HX, 4HZ, 4HW, 4HY, 4HT, 4HS, 4HP, 4HR, 4HN

Injector Extractor Kit - Mercedes• Allows for the removal of tightly fixed injectors nozzles and injectors on Mercedes 2.1L, 2.2L, 3.0 V6 and Chrysler 300C without removal of the cylinder head• Engine removal not required • Injectors: Bosch (2.1L / 2.2L), Delphi (3.0), Mercedes: Vito, Vario, CLK, Sprinter, Viano, Class: M, GL, C, GLK, E, CLS, S, R and G

Injector Extractor Kit - Renault• For removing injectors using a mechanical screw system• Engine removal not required• Injectors: Bosch• Suitable for: Renault, Nissan, Opel• Engine: 1.9dCI• Engine Code: F9Q

Denso Injectors: - 23670 - 30080- MB416600 - MB40A- 5870 - 13H50B- 11L 12182- 23670 - 26011- 23670 - 0R050 - 10J 06798

£299.95

£499.00

£295.00

18590000Universal Extractor Kit with Hydraulic Cylinder• Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Note: Pump not included (20017000)• Hydraulic cylinder with 10 tonnes of force • Hydraulic and Mechanical operation• Suitable for the extraction of numerous models of diesel fuel injectors specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16 x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens • This compact kit can be used directly on the engine - in-situ• Can be used as a mechanical kit for the most confined spaces - i.e. against a bulkhead• Can be used as a hydraulic kit for maximum power to help release tightly seized injectors• Easy to set up and adjustable supporting feet allow for angle and position setting• Main side and top bars allow for adaption onto various engine configurations

NEW

£1250.00

£210.00

NEW

NEW NEW


CHARITYDONATION

£2 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION £1 CHARITY

DONATION

TESTING & BATTERY CARE

8

03202500

845124SP

Start / Stop Battery & Electrical System Analyser• Tests 6V-12V batteries and 12V-24V volt charging & starting systems• Digital screen with integrated printer• Operating range: 40-2000 CCA• Bad connection warning

• Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries• Protection against: Short circuits, voltage peaks (AC & DC), polarity inversion overheating and voltage spikes• Supplied with: - Eyelets for permanant battery connection - Cigarette Lighter Plug to recharge through 12v Aux. Socket - Crocodile Clamps for Battery Connection

NEW

OFFER £279.95SAVE £20.00

LIST PRICE £299.95

MADE IN THE UKPortable 4 Gas Analyser with Printer• For fault diagnosis, tuning and pre-MOT testing• Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg• Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy• Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing• Internal memory stores up to 250 test results - manual & automatic recording options • Up to 4 hours internal battery life• Provides Lambda / AFR measurement and corrected CO• Pump speed control - Improves battery life • Bluetooth connectivity to PC (Free analytical software available to download) • Large graphic display • Includes printer and AC / 12v chargers

325200SP

INCLUDES INFRA-RED

PRINTER £1495.00

Propulstation Booster Pack with Docking Station

12v 800CA for Workshop

12v 800CA for Vehicle

521002AC

521002DC

• Supplied with mains AC charger for workshop use• Voltage - 12v • Cranking Amps - 800CA • Peak Amps - 2370

• Designed to be installed into a vehicle• Voltage - 12v • Cranking Amps - 800CA • Peak Amps - 2370

ALL BOOSTER PACKS HAVE LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY

£535.95

£493.95£63.95

Eliminate the risk and frustration of an uncharged booster pack!• Long & flexible cables with double insulation• Robust, wide-opening clamps include copper trace carrying the current to the bronze jaws & protecting the spring against over-heating

861041SPSOS Booster Pack - MINI 12v 440CAPro-Start Booster Packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles

• Voltage - 12v • Cranking Amps - 440CA• Peak Amps - 1600 • Cable length - 0.6 metre• Clamp Opening - 40mm• Automatic Charger - 1.3A• Size - 37.5 x 11 x 32cm

“All booster packs include a mains 240V smart charger to maintain peak battery condition for long life & maximum performance”

Accusmart 12v 4Amp Battery Charger

Other Accusmart Battery Chargers are also available. For further details please visit our website: www.sykes-pickavant.com

AUTOMATICELECTRONICINTELLIGENT

þþþ

Part No. Description Voltage Cranking Amps

Peak Amps Price

861001SP Pro-Start 700 12v 700 1860 £282.95

861002SP Pro-Start 800 12v 800 2370 £365.95

761001SPPro-Start Plus 1400

12/24v1400 /

7003720 / 1860 £668.95

761006SPPro-Start Plus 1600

12/24v1600 /

8004740 / 2370 £885.95

WORTH £150.00

Other models also available:

£170.95

• Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries in seconds• Rating system: SAE (CCA) / DIN / EN / IEC & JIS

Spare paper rolls available: 032025-01 (Pack of 2)


CHARITYDONATION

£2 CHARITYDONATION

SUSPENSION WORKSTATIONS Tel: 01543 679900 www.sykes-pickavant.com

9

Jaw Holder• For use with 3858 & 3868 workstation brackets• Includes: 3 x hanging hooks 4 x slots for brackets

385800-61

38580400

Mercedes Bracket• For Mercedes C Class (W204) 2008-2014 and E Class Coupe (W207 / C207) 2009 onwards - Front springs

Special Bracket• For VW Touareg / Porsche Cayenne

Special Bracket• For Mercedes C Class 2010-

Special Bracket• For Nissan Qashqai

Workstation Swivel Jaws - Pair• Mounts onto top arms in place of standard top jaws & contacts directly onto spring• Jaw ‘floats’ to follow changes in spring angle / profile during compression • Constant contact with the coil spring surface area for increased safety• Able to work on both left and right handed coil springs when used in conjunction with brackets above

Coil Spring Clamp• Tool to secure coil spring into lower bracket • Designed to hold the coil spring still during initial compression and restrict twisting through the bracket

38580200

38480800

38480400 38480500 38480600

£179.95 £179.95 £179.95

385800-60Workstation Arm Extender - Pair• Mounts between original top arm and jaw attachment• Use to extend the length of the top spring mounting jaw position • Can be used singly to provide 10mm extension or as a pair for 20mm ext

NEW NEWNEW

MADE IN THE UK

Mercedes Bracket• For Mercedes ML Class 163 1997-2005 - Rear springs

Upper Jaw Set• For high compression and close coil springs (Toyota / Honda etc)

Double Depth Strut Vice• For use with extra long strut assemblies• Chrysler Voyager

38480900 38481000

38480200 38480700

Mercedes Bracket• For Mercedes C Class (W205) 2015 onwards - Front springs

£42.95 £117.95

Mercedes Bracket Set• Upper bracket for Mercedes A, B, C, E Class and lower bracket for E Class

38480100

£239.95

£99.95 £179.95 £119.95

£69.95

MADE IN THE UK

MADE IN THE UK MADE IN THE UK

THE BEST SPRING PROGRAMME ON THE MARKET

£149.95

£49.95 £99.95


CHARITYDONATION

£1 CHARITYDONATION £1 CHARITY

DONATION £1 CHARITYDONATION

SUSPENSION WORKSTATIONS

10

OFFER £1595.00SAVE £150.00


38680000

Fitted with Heavy Duty Mechanical Components instead of Pneumatics - Ideal for mobile use or where air supply is not practical• Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring• Long main spindle achieves large 420mm of stroke• Powered by easy access 19mm hex drive on top of tool directly onto main spindle and can be used with either hand tools or even impact air tools• Includes adjustable vice clamp• Dimensions: 1400 x 520 x 300mm

AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT

HAND COILS

SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN

FULL HEIGHT STEEL SAFETY GATES

LENGTH OF TRAVEL: 330MM

UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON

EXTRA-LONG STRUT ASSEMBLIES

TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING

4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCEUP TO 2452KG OF FORCE

(AT 10 BAR) AT THE PRESSOF A PEDAL

ADJUSTABLE STRUT VICE WITH4 x SETTING OPTIONS

INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS

Mechanical Coil Spring Compressor Workstation

SPRINGS HAVE EVOLVED....HAVE YOUR TOOLS?

INCLUDES FREE

MERCEDES BRACKET SET (38480100)UPPER BRACKET FOR MERCEDES A, B, C, E CLASS &

LOWER BRACKET FOR MERCEDES E CLASSWORTH £239.95

HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION

39 Pc. Universal Shock Absorber Tool Set• Enables the piston rod to be held whilst allowing the nut to be loosened / tightened• Includes - 2-tap & slot-profile socket - D-profile / Slotted / T-profile bits - 6-pt sockets & bits - M12 - XZN bit• Ideal for use with 3858 compressor workstation

08921000

£149.95

385800SP

Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD’s and LCV’s. Includes 2 x standard brackets (78-130mm / 125-205mm) and 1 x strut vice

£795.00

SIMPLY THE BEST


CHARITYDONATION

ENGINE SERVICE Tel: 01543 679900 www.sykes-pickavant.com

31467500

08550500 08529500

017500V2

11

31467000

31467600

Diesel Fuel System Bleeding Kit• Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system• Contains common sized low pressure pipe sets including:- Standard 8mm, 10mm and newer 9.65mm (3/8 inch)- Renault small & large - Ford• Typical coverage includes: Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall• Clear pipes for visability of air bubbles• Colour coded pipes for easy identification

5th Gear Puller - Ford• A quick and simple method of removing the fifth gear on Ford FWD transmissions, before carrying out internal repairs

Applications:- Ford IB5 Gearbox: Fiesta / Ka / Focus

- Ford MTX-75 Gearbox: Focus / C-Max / Mondeo / Jaguar X Type

- Ford VXT-75 Gearbox: Galaxy / Transit / Transit Connect

Seal Removal & Replacement Kit• Remove & install awkward seals as found on engines, gear boxes, power steering pumps etc• Universal coverage for seals 27-58mm diameter• Includes seal puller, long & short extracting hooks for seals - e.g. on camshafts or crankshafts and a selection of bushes, sleeves and mandrels for installing new seals

Diesel Injector Seat Cleaner Set• Cleans injector seats and chambers when changing or reconditioning diesel injectors• Helps to avoid blow-back due to poorly seated injectors• Now includes: - Removal tool for copper washers - Injector blanking plugs to avoid debris entering the cylinders - Wire brush cleaning set for chamber walls - New centralising stem to improve correct cleaning seating angle

Diesel Fuel System Bleeding Kit - Master Kit• Includes 31467500 kit (left) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump• Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure

Ratchet Pump Kit• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (left) to generate faster flow• Retaining bracket holds pump during use for one-hand operation Note: Suitable for diesel fuel systems only

£375.00

£99.95MADE IN THE UK

NEW53406100DPF Service KitFortron Diesel Particulate Treatment (DPF) has been formulated for two applications: 1. As a fuel tank additive to treat DPF contamination 2. As a preventive maintenance tool• Aids passive regeneration of the DPF • Helps to maintain engine performance / efficiency • Reduces soot & exhaust gas emissions• Suitable for all diesel fuels and fuel additive systems e.g. Eolys fluid

ONE KIT TREATS UP TO 50L OF DIESEL FLUID £18.00

534061-12 DPF Service Kit - 12 Pack £216.00

OFFER £149.95SAVE £50.00

LIST PRICE £199.95

OFFER £72.95SAVE £27.00

LIST PRICE £99.95

OFFER £64.95SAVE £39.30

LIST PRICE £104.25

OFFER £179.95SAVE £39.05

LIST PRICE £219.00


CHARITYDONATION

£2 CHARITYDONATION

384000SPGearbox Cradle (38450000)• For gearboxes up to 300kg• Twin adjustable screws allow for various gearbox orientations• Four adjustable side plates to fit and support gearboxes• Includes two collars to fit popular transmission jacks

Transmission Jack PLUS Gearbox Cradle• Transmission Jack (38400000) features:- Pedal pump- Chrome plated ext. rod- “Dead man” controls- Max. height: 1970mm- Max. weight: 300kg

08770000Universal Press Support Block• Easily press bearings on a variety of suspension arms• Three point contact guarantees a perfect, safe support• Adjustable height anvil bolts• Swivel element for added versatility• Suitable for use with presses up to 30T

£219.00

WORKSHOP EQUIPMENT

12

Mechanical Headlight Beam Testers - MOT Approved & Pre-Inspection• Features rotating column with adjustable mirror visor for accurate alignment to vehicle• Luxmeter with graduated analogue scale for accurate light intensity measurement• Easily adjustable vertical sliding mechanism by self lubricating sliders • Features built in MOT beam checking panel

02695000Pre-Inspection Headlight Beam Tester • Portable base on 3 wheels (self install only)• Column height: 1.66m

02683000

02688000

MOT Approved Headlight Beam Tester - LV • 3.7 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only)

MOT Approved Headlight Beam Tester - HGV • 5.2 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only)

£745.00

£635.00

£595.00

NEW

NEW

Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system & V blocks• Heavy duty steel frame • Two speed pump • Overload safety valve • Automatic arm return • Pressure gauge • V blocks• Manufactured in the EU• Piston over-travel limit stop• Winch for table (For models 53436400 & 53436500)

Part No. Rating Height (mm)

Width (mm)

Depth (mm)

Bed Depth (mm)

Range (mm)

Weight (kg) Price

53436000* 15T 1930 920 650 170 85 - 950 150 £624.00

53436200* 20T 2030 940 650 180 65 - 1030 165 £744.00

53436300* 25T 2030 950 650 180 70 - 1030 170 £944.00

53436400* 30T 2060 1120 650 200 115 - 1020 230 £999.00

53436500 50T 2290 1220 650 210 70 - 1065 370 £1624.00

*Recommended for use with Universal Press Support Block - 08770000 - See above

N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply

Other sizes of press are available - Contact Customer Services for details

SUITABLE FOR ALL HEADLIGHT TYPES INCLUDING XENON

COMBINED OFFER!

+OFFER £339.00

SAVE £39.00LIST PRICE £378.00


CHARITYDONATION

£2 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

WORKSHOP TOOLS Tel: 01543 679900 www.sykes-pickavant.com

03860000 03275000

13

OFFER £15.95SAVE £19.00

LIST PRICE £34.95

Strap Type Oil Filter Remover For all filters up to 300mm diameter• Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference• Range: 20 to 300mm diameter• Strong steel shank and polyester strap• Strap Length: 1 metre long & 40mm wide• Double ended 13/16” hex c/w 3/8” & 1/2” sq. dr

Two Way Hose Clamp Plier • Wide application plier for use on radiator clamps, fuel line clamps, tank ventilation line clamps and bearing clips• Special intersected slot design ideal for use in confined spaces• 16mm wide head more effectively grips hose clamp compared to general 9mm head pliers

0455100011 Pc. Non Marking Trim Tool Set• Professional set of strong, flexible plastic angled, lever and panel pullers• Reduces risk of damaging / scratching surfaces

02251000Stud Remover & Installer Kit• Unique design allows the installation & removal of studs without damaging the threads• Allows tightening & application of torque without thread damage• Sizes: - M6 x 1.0 - M8 x 1.25 - M10 x 1.25 - M10 x 1.50

690055003/4” Impact Socket Set• Includes 7 x popular sizes: 24, 27, 30, 32, 33, 36 and 41mm• 175mm extension

6900120015 Pc. XS Stubby Impact Socket Set• Includes 15 x 1/2” drive sockets (10-24mm)• Extra short low profile - 28mm - Ideal for use in confined, tight spaces• Ideal for use with 1/2” ultra short impact wrench - 90201300

01493500

660888004 Pc. Removal & Replacement Set• Allows for easy replacement of seals and ‘o’ rings while reducing the risk of damage to seal or finished surface

IDEAL FOR USE ON VW GROUP ELECTRICAL

CONNECTORS


LIST PRICE £21.95

03900100Crows Foot Oil Filter Wrench• For the removal and installation of the oil filter on Ford Duratorq and PSA 2.0 and 2.2 HDi / TDCi engines • Unique shaped design allows easier and faster access• 27mm bi-hex with 1/2” drive• Engine codes: DW10C / DW12C


LIST PRICE £17.95

Digital LCD Circuit Tester• Suitable for 6, 12 and 24v systems• LED indication for power (red) and ground (green)• Features crocodile clip with spring cable extendable to 3 metres• Stainless steel probe • Small testing current <10mA

NEW

£24.95

OFFER £34.95SAVE £35.00

LIST PRICE £69.95

IDEAL FOR USE ONVW FUEL FILTER PIPE CLIPS


LIST PRICE £24.95

£16.95

£69.95

OFFER £139.95SAVE £10.00

LIST PRICE £149.95


CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

OFFER £299.00SAVE £80.95

LIST PRICE £379.95

Ford Transit Ball Joint Tool - Manual Option• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013• Designed to support ball joint during installation - helps eliminate premature ball joint failure• Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram

£172.50

08260300Ford Transit Wheel Hub & Brake Disc Assembly Remover• For removal of the front brake disc and hub assembly on Ford Transits from 2001 - 2013 • OEM Code: 204-345B

Ford Transit Rear Disc Separator Kit• Press solution for removing the rear disc from the bearing hub• The hub bearings on this type of Transit often seize in place, requiring extreme force to separate• Suitable for Ford Transits 2000 onwards (where rear discs are fitted - 5 stud)

Bearing References:SNR: R152.58 SKF: VKBA3589 Optimal: 302 255 Febi: 45355

08253800 MADE IN THE UK

08256000 ON VEHICLE SOLUTION

£139.95

Ford Transit Hub & Front Wheel Bearing Remover KitUpdated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits• For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal• Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool

3 IN 1 TOOL082545V2

Ford Transit Bearing Press KitSuccessful removal of troublesome inner bearing race and reinstallation of complete bearing assembly• For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press• Suitable for bearings on both 5 & 6 stud hubs

08756000 MADE IN THE UK BESTSELLER

REMOVES BOTH THE INNER & OUTER BEARING RACE WITHOUT

CUTTING OR HEATING

£199.00

TRANSIT TOOLS

NEW

14

NEW

Hydraulic option also available (18256000) that includes 12 Tonne SP hydraulic ram

MADE IN THE UK

MADE IN THE UK08269000Ford Transit Lower Arm Bush Tool• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013• Designed to be used with a 187000V2 press frame and ram• On vehicle solution with minimal strip down• Can also be used in a workshop press for lower arms when they have been removed from the vehicle

• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013• OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131

£99.00

OFFER £59.95SAVE £40.00

LIST PRICE £99.95


CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

Flaremaster 2 - The Original Hand Held Automotive Brake Pipe Flaring Tool • Hydraulic power unit provides portable power for precision flaring• Quick-release chuck for positive engagement of the punch• Enhanced bridge unit for greater strength and inter-changeable die, held in place by magnets• Create full, or part sections of pipe, which can be trimmed, flared or spliced as required• Flaring pipes on the vehicle allows for accurate repair sections to be spliced • Stainless steel upgrade kit available (02727500)

BRAKE BLEEDING & SERVICE Tel: 01543 679900 www.sykes-pickavant.com

15

Brake Pipe Flaring Kits - 270 SeriesBrake flaring tool that produces both Convex and Double Lap flares to SAE & DIN standards• Metric & imperial pipe sizes • From 3/16” to 1/2” / From 4.75mm to 12mm• Unique ‘Dial-a-Size’ Turret design • Lever cam operation for quick flaring• Automatic punch extraction from flare • Screw clamp for accurate die alignmentAvailable Kits:

Part No. Suitable for brake pipe sizes List Price Save Offer

02700100 SAE Single & Double Flares: 3/16” & 4.75mm £185.00 £31.00 £154.00

02700200SAE Single & Double Flares: 3/16”, 4.75, 6, 8, 10mm DIN Single Flares: 4.75mm £239.00 £40.00 £199.00

02700800SAE Single & Double Flares: 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm

£310.00 £55.00 £255.00

02700900SAE Single & Double Flares: 3/16, 1/4” 4.75, 6mm DIN Single Flares: 4.75mm £215.00 £36.05 £178.95

MADE IN THE UK

BRAKE PIPE FLARING TOOL

No.1Part No. Size Contents List Price Save Offer

027250004.75mm, 3/16” brake pipes

SAE & DIN single and double flaresFlaremaster2 £157.50 £28.00 £129.50

027256004.75mm, 3/16” & 6mm brake pipes SAE & DIN single and double flares

Flaremaster2 £187.50 £32.00 £155.50

027295004.75mm, 3/16” brake pipes

SAE & DIN single and double flares

Flaremaster2 / Brake Pipe Aid Plier Telescopic Tube Cutter (3-32mm) Pipe Deburring Tool (3.2-16mm)

£197.50 £34.00 £163.50

027296004.75mm, 3/16” & 6mm brake pipes SAE & DIN single and double flares

Flaremaster2 / Brake Pipe Aid Plier Telescopic Tube Cutter (3-32mm) Pipe Deburring Tool (3.2-16mm)

£227.50 £38.00 £189.50

CAPABLE OF FLARINGSTEEL BRAKE PIPES

34400500

OFFER £475.00SAVE £24.00

LIST PRICE £499.00

03614000

03490000

Air Assisted Caliper Piston Wind Back Tool Kit• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand• Reversible – works on both RH & LH applications• Magnetic head • Supplied with nine adaptors

Speedyvac Brake Bleeder Kit• Float valve shuts vacuum down when container reaches full to prevent dangerous brake fluid spray if capacity is accidently exceeded• Compact size (800ml capacity) • Internal shut off valve closes when not in use • Includes Autofiller unit (500ml capacity)

OFFER £69.95SAVE £30.00

LIST PRICE £99.95

£99.00ONE USER OPERATION

MADE IN THE UK

VICE MOUNTED

ON CAR

INDUSTRY LEADING FLARING TOOL FOR OVER 30 YEARS

240v Electric Brake Bleeder - 6 bar• One man operation for brake & clutch bleeding• Compatible with ABS systems• Rugged impact resistant moulded housing • Long supply hose (3.2m) • Adjustable pressure output from 0 - 6 bar to suit vehicle• Large internal storage area for brake fluid containers up to 10L• Includes aluminium SP Euro cap - angled screw type for popular vehicle connection• Additional range of caps also available

- Weight: 10kg

NEW


CHARITYDONATION

£1 CHARITYDONATION

WORKSHOP EQUIPMENT

16

12 Packs are available for all Fortron Fluid Accessories. Ask your Distributor for details

Further details of the Fortron range can be found on our website: www.sykes-pickavant.com

£1995.00

£2199.00

£995.00

53401500Fortron Coolant Flush Machine• Effective way of flushing and exchanging the complete cooling system fluid• Suitable for all types of coolants & vehicles• Includes a set of multi-application adaptor fittings• Air operated

53405500

53404500Fortron Power Steering Flush Machine• Replaces 100% of steering fluid• Takes on average 10 minutes per service• Extends the service life of (often overlooked) system• Revitalises and conditions ‘o’ rings and seals

£1995.00

Fortron Injector Max MachineSimple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle

53403500

Part No. Description Price53403600 Petrol System Cleaning Fluid £18.49

53403700 Diesel System Cleaning Fluid £18.49

53403800 Vactek Fluid Bottle £11.99

53403900 Induction Service Kit - Petrol (Aerosol) £11.99

53404000 Induction Service Kit - Diesel (Aerosol) £17.49

53404300 Induction Service Kit - Petrol (Pouring Fluid) £17.49

Part No. Description Price53401600 Coolant Flush Treatment Additive £11.49

Part No. Description Price53404600 Power Steering Flush Service Kit £11.49

Part No. Description Price53402600 ATF Flush Service Kit £11.49

Fluid Accessories

Fluid Accessories

Fluid Accessories

Fluid Accessories

BESTSELLER

Fortron Automatic Transmission Fluid Flush Machine - Manual• Manual controls for ATF exchange process• Complete fluid exchange, including cooler, converter and cooler lines• Includes range of fittings and adaptors

£3495.00

Fortron Automatic Transmission Fluid Flush Machine - Fully Auto• Can replace up to 100% of transmission fluid• Specify exact amount of fluid to change• Digital control panel allows for fully automated control - Simply set amount to be exchanged and start • Safely cleans up and extends the service life of automatic transmissions• Includes comprehensive adaptor set

53402500 ALLOWS FOR UNATTENDED OPERATION

INCLUDES: • Comprehensive Adaptor Set

• FREE leaflet dispenser & leaflets

• Access to the Fortron-Zone forum

• Listing on the Injector Max Garage Directory as featured on our website


CHARITYDONATION

£2 CHARITYDONATION

£2 CHARITYDONATION

£2 CHARITYDONATION

£2 CHARITYDONATION

£2 CHARITYDONATION

1500 Series 8 Tonne Extra Travel Ram• 90mm of travel allows for quick and easy job setting• In built hydraulic system - no external pump required • 4 x faster output operation than standard SP1500 Series ram

SUSPENSION Tel: 01543 679900 www.sykes-pickavant.com

17

CAN ACHIEVE UP TO 4 TONNES OF MECHANICAL FORCE

PRIOR TO HYDRAULIC OPERATION

180000V21800 Series 12 Tonne Hydraulic Ram• Standard power unit for SP suspension products and is 50% more powerful than the original SP1500 Series 8 tonne ram, creating reliable power for tough applications• Kit now includes 2” extension and foam cut-out for storage

£109.95

NEW DESIGN UPGRADE FOR 2016 INCLUDES PRE-LOADING 30MM HEX

£329.00

NEW150000XT

Note: 18700100 Press Frame not included - See above for details

“Fits all current 1500 Series Puller Range where the 1500 Series ram is used, the 18700100 universal press frame and 18780500

universal c-clamp for suspension work”

Universal Press Frame • Includes adaptor ring (18780400) for use with 08780000 and related press piece sets• Can also be used with SP 8 or 12 tonne hydraulic ram and press frame pressure screw

£198.9518700100

18732100 18732200Adaptor Set for Fiesta Trailing Arm Bushes

Adaptor Set for Focus Trailing Arm Bushes

Adaptor Sets for Focus / Fiesta Trailing Arm Bushes

Applications: Fiesta ‘95-’02, KA ‘96-’08, Puma ‘96-’02

Applications: C-MAX ‘07- MPV, MKI ‘98-’04, MKII ‘04-, Kuga ‘08-, Mazda 3 (BK) ‘03-’09, Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06-, Volvo C70 II ‘07-, Volvo S40 II ‘04-’12, Volvo V50 ‘04-’12 For full application details, please visit our website: www.sykes-pickavant.com

£99.95£99.95

MADE IN THE UK

18771000Land Rover Swivel Ball Joint Adaptor Set • New “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02

Land Rover Discovery 3 & 4 Suspension Bush Master KitSpecifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models• Available kits: - Master Kit - Front lower - Front upper - Rear lower - Rear upper• Lower arm bushes can be replaced on vehicle without having to remove the wheel• Individual press frame pieces for each wishbone

OFFER £169.95SAVE £30.00

LIST PRICE £199.95

MADE IN THE UK

187403V3Mercedes Sprinter Ball Joint Adaptor Set• Updated set now includes new cup for common aftermarket arms • For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906)• Applications: - Sprinter ‘95 onwards - VW Crafter & Sprinter ‘06 onwards - VW LT ‘96 - ‘06

£199.00UPDATED SET

187 SUSPENSION PROGRAMME

Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Sets• For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards

£99.00 £99.00

18777000

187502V3 187503V3

• Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram *Note - Adaptor Ring 18780400 required

• For the removal and installation of trailing arm bushes

OFFER £599.00SAVE £50.00

LIST PRICE £649.00

Adaptor Set - UPPER Ball Joint• Adaptor set from main kit (187512V3) for use on upper ball joints

Adaptor Set - LOWER Ball Joint• Adaptor set from main kit (187512V3) for use on lower ball joints


CHARITYDONATION

£1 CHARITYDONATION

£1 CHARITYDONATION

SUSPENSION

18

Universal Press & Pull Sleeve Kit - Car / LCV Kit• Universal tool set for extracting and drawing-in of bushes, bearings, seals etc • Contains 20 x Press Sleeves in 2mm dia. steps• Inside Dia. Range: 34 - 72mm • Outside Dia. Range: 44 - 82mm

08780000XL Basic Kit - SUV / LCV• For use as an add-on to the standard 08780000 kit (left)• Inside Dia. Range: 82 - 88mm & 98 - 104mm• Outside Dia. Range: 92 - 98mm & 108 - 114mm

08790000

GEN2 All Sizes Master Kit• 62 / 66 / 72 / 78 / 82 / 85mm sizes:- 62mm: Audi A2, VW Lupo (Front)- 66mm: Skoda Fabia, VW Fox (Front), Polo- 72mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)- 78mm: Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 - 82mm: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70- 85mm: VW Multivan, Touareg, Transporter (Front / Rear)

081220V2

£249.00XS Sleeve Kit - Basic• For use as an add-on to the 08780000 kit (above) to increase applications for smaller bushes and ball joints• Contains 10 x Press Sleeves in 2mm dia. steps• Inside Dia. Range: 14 - 32mm• Outside Dia. Range: 24 - 42mm

Ford & Volvo Rear Wishbone / Trailing Arm Bush Tool Kit• Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars• Suitable for: Ford: Mondeo / Mondeo Estate ‘07-, S-Max & Galaxy ‘06- Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-

08785500

087304V2

IDEAL FORBALL JOINTS

08786500XS Sleeve Kit - Master• Stand alone kit for smaller bush applications• Contains 10 x Press Sleeves in 2mm diameter steps• Inside Dia. Range: 14 - 32mm• Outside Dia. Range: 24 - 42mm

£325.00

GEN3 Wheel Bearing Kit• Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles• This procedure is currently carried out with repeated heavy blows using a hammer to remove the heavily corroded bearing which can easily damage surrounding components such as steering knuckles and ball joints or fracture the aluminium wishbone

08135500 NEW

£299.95

Applications: Audi: A4 00-, A5 07-, A6 97-, A7 10-, A8 94-, Q5 08-, R8 07- Seat: Exeo 08- VW: Passat 03-

Bearing Reference:FAG: 5745, 5726, 5739, 5478, 5744 SKF: VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649SNR-NTN: R157.45, R157.26, R157.40, R154.57, R157.43

£379.00

£845.00

Individual Kits also available - Please contact Sykes-Pickavant for further information

BESTSELLER

BUY THE BEST!187 SUSPENSION PROGRAMME

ON VEHICLE SOLUTION

ON VEHICLE SOLUTION

£694.95

OFFER £199.95SAVE £195.05

LIST PRICE £395.00

Adaptor Set - LOWER Ball Joint• Adaptor set from main kit (187512V3) for use on lower ball joints


CHARITYDONATION

£1 CHARITYDONATION

Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United KingdomTel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: [email protected] www.sykes-pickavant.com

Distributor Stamp:

ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 30TH JUNE 2016 - REF: SPQ216GBP COPYRIGHT 2016 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.

INDUCTION Tel: 01543 679900 www.sykes-pickavant.com

SP INDUCTION HEATER RANGE - 3 VERSIONS NOW AVAILABLE!All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS -

expanding the metal which allows for fast and easy release

• Operates cooler for better efficiency, handling and product longevity • Integrated CE filter improves handling of product • Long operating cycle time • LED light illuminates work area• Includes 3 x coil attachments • 1 year warranty - Parts/Labour • Durable reinforced thermal plastic housing with slip resistant grenade style grip • Carry Case with storage for all attachments For further details please visit: www.sykes-pickavant.com

960200SP

9602012V

SP 230v Induction Heater + with SP Coil Kit (96015000 - see below)• Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt with full CE certification

OFFER £645.00SAVE £49.95

LIST PRICE £694.95

SP 12v Induction Heater + • Specifically designed for the UK/EU: 12v / 70 amp / 840 watt with full CE certification• Completely portable - works with any 12v battery pack or 12v battery

12V BATTERY OPERATED

INCLUDES SP COIL KIT96015000

96021100SP 110v Induction Heater + • Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt with full CE certification• Provides safe and near instant heat for site work, construction and factory maintenance users• Replaces the need for open flame options when heating components, making the completion of on-site risk assessments far easier

IDEAL FOR SITE WORK

Choose from the following accessories that are compatible with our full range of Induction Heaters

96015000 960260SP 96025000SP Coil Kit • 8 x popular sizes of interchangeable coils

SP Rope Coil Set - x3• Contains 3 x highly adaptable coils allowing user to shape to suit

SP Heat Pad• For the removal of decals, graphics, stripes, emblems & body mouldings etc• Softens the adhesive to make removal simple & effective

£99.95

£74.85

£67.95

ONLY ONE ON THE MARKET!

THE REST JUST CAN’T TAKE THE HEAT!

£595.00

£595.00

N.B. Not included

N.B. Not included

During this quarter (April - June 2016), for every product sold that features the green

symbol, we will donate the indicated amount to our chosen cancer charity.

For further details regarding our fundraising activities, please visit: www.sykes-pickavant.com

CHARITYDONATION

£1 CHARITYDONATION

£2 CHARITYDONATION

NEW PRODUCTS SPECIAL OFFERS - Sykes-Pickavant

Documents