NEW HOLLAND PRECISION LAND MANAGEMENT · If you are ready to start saving time and money, working more comfortably and getting more out every season with precision farming, New Holland

NEW HOLLAND PRECISION LAND MANAGEMENT

FARM WITH PRECISION WITH NEW HOLLAND.

2 3

ARE YOU READY FOR PRECISION FARMING?WE TOTALLY ARE.

In an ever more challenging and competitive agricultural scenario, precision farming has becomemuch more than a useful, optional technique. With costs of fuel, seeds, inputs and workforce continuously on the rise, precision farming is nowa real necessity for any kind of farmer and any size of business.

Precision farming should be accessible for all: and this is precisely the mission of New HollandPrecision Land Management.A mission accomplished through the widest range of high quality and precision tools and systems,all featuring intuitive user-friendly interfaces, you can confidently choose from.Through an offering of tractors and harvesting equipment already integrating all the New Hollandprecision, to let you step up your productivity while reducing your costs from day one.And last but not least, through the possibility to install New Holland PLM devices on any machineto master any implement, thus delivering all the New Holland precision to all.

If you are ready to start saving time and money, working more comfortably and getting more outevery season with precision farming, New Holland Precision Land Management is ready for you.

Understanding Precision Farming4 - An introduction to GPS5 - Guidange System advantages6 - Four levels of accuracy

PLM solutions7 - How to choose8 - Guidance displays11 - Assisted guidance

PLM advanced solutions12 - New Holland Integrated solutions20 - Integrated retrofit guidance

Beyond the field22 - Map it, analyse it and print it23 - PLM portal

AN INTRODUCTION TO GPS.

4 5

WHAT IS GPS?The GPS (Global Positioning System) operated by the U.S department of Defence and GLONASS operated by theRussian Federation are a space-based navigation system formed from a network of satellites which determine theposition of a vehicle using signals from the 32 satellites that circle the earth. These satellites travel in known orbitsthat allow a land based receiver to determine its own position in relation to each satellite from which it receives asignal.

The GPS antenna fitted to the machine receives continuous signals from the GPS satellites. Ground based GPSreceivers, at known locations across the country, receive the same signals. As their absolute location is known, theycan calculate the real time position and send a position correction signal. Geostationary satellites then return thecorrection signal to the GPS receiver on the vehicle, and the correction can be applied to the received position.

The signals generated by GPS alone are not accurate enough for use in agriculture. Therefore, corrections must bemade to GPS signals to improve their accuracy. With these correction signals we refer to the system as DGPS(Differential Global Positioning System).

HOW ACCURATE IS GPS?An uncorrected GPS or GLONASS signal gives you position accuracy between 5 to 10 meters. This is more thanadequate for car navigation systems, but not accurate enough for vehicle guidance in agricultural applications,where we need Pass-to-Pass and Year-to-Year accuracy and repeatability.

Pass-to-Pass accuracy measures the relative accuracy over a 15 minute interval. This is usually thought of as skip/overlap from one pass to the next when driving swaths. A New Holland receiver with pass-to-pass accuracy of +/-2.5cm means you get less than +/-2.5 cm skip or overlap, 95% of the time.

Year-to-Year accuracy is the measure of repeatable accuracy which means that you can drive the same rows a day,week, month, or year later. So, +/- 2.5 cm year-to-year accuracy means you can drive the same rows next year within+/- 2.5 cm of this year’s rows, 95% of the time.

GUIDANCE SYSTEM ADVANTAGES.MAXIMISE YIELDS, CONTROL INPUT COSTSAND OPTIMISE PROFITS.

WHY GPS GUIDANCE? BENEFITS OF VEHICLE GUIDANCEFrom the enhanced productivity of lightbar guidance, to the pinpoint accuracy of fully integratedguidance, and the valuable analysis of yield data, our Precision Land Management offering willhelp maximise yields, control input costs and optimise profits.

INCREASED EFFICIENCY, REDUCED FUEL CONSUMPTIONThe primary purpose of New Holland’s Precision Land Management is to save fuel and input costs by ensuring parallel passes when working either in straight lines, curves, pivots or on undulating ground minimising skips and overlaps.

IMPROVE PRODUCTIVITY, EVEN IN DUSTY CONDITIONSWhen planting, spraying, cultivating or harvesting in difficult weather conditions or at night, the operator can focus on his task without any risk of skips of overlaps, while driving faster.

INCREASE OPERATOR’S COMFORTOperators using guidance solutions often report “being less fatigued and stressed” as one of the fundamental advantages of precision farming, leading to increased work rates and efficiency.

CONTROLLED TRAFFIC FARMING PRACTICESWith RTK enabled New Holland guidance systems, the practice of Controlled Traffic Farming can be adopted, leading to a significant reduction in field compaction improving overall yields.

6 7

FOUR LEVELS OF ACCURACY.NEW HOLLAND PLM – THE COMPLETE, FLEXIBLEGNSS SYSTEM DOWN TO 2.5 CM ACCURACY.

15 20 25 30

20 cmEGNOS

15 20 25 30

20 cmOmniSTAR VBS

12 cm

9 10 11 12 13 14

OmniSTAR XP10 cm

8 9 10 11

OmniSTAR HP

2.5 cm

0 1 2

RTK Radio

1 - 20 cm accuracy with EGNOS / OmniSTAR VBS (Single Frequency Correction)The vehicle with a GPS antenna receives signals from the GPS satellite constellation,and is able to compute its location. Both the EGNOS and OmniSTAR networks have a number of ground base stations located across the area for which they provide acorrection service. These base stations receive the same signals from the GPS satellitesas does the vehicle. The base stations can calculate the real time position error bycomparing the received positions to their known locations. An error correction messageis then sent to an upload station, transmitted to a Geostationary Satellite, and then re-transmitted to the receiver on the vehicle. With this error correction message, position accuracy of 20 cm can be achieved. The EGNOS system is in development. The OmniSTAR VBS system is fully operational, with an increased signal reliability.

2 - 12 cm accuracy with OmniSTAR XP (Dual Frequency Correction)The OmniSTAR XP solution does not use a network of ground based stations for thecalculation of the real time position error. Independent satellite monitoring stations basedaround the world continually read the messages being received from the constellations.By comparing the messages received, with the known theoretical positions for eachsatellite, an error correction message can be calculated. This message is then sent to anupload station, and transmitted to the vehicle via a Geostationary satellite. By monitoringboth code and carrier phase messages from the satellites, a more accurate positionresolution can be achieved. OmniSTAR XP is an ideal solution for use in the areas of the world not covered by a ground based network of monitoring stations.

3 - 10 cm accuracy with OmniSTAR HP (Dual Frequency Correction)The OmniSTAR HP solution uses the dual frequency monitory technology used with theOmniSTAR XP solution, and monitors the signals via a ground based network. Within thearea covered by the base station network, this allows a higher accuracy resolution to becalculated. The error correction message is sent to the vehicle via the upload stationsand Geostationary satellites.

4 - 2.5 cm accuracy with RTK (Real Time Kinematic)This is a highly precise technology that results in 2.5 cm year-to-year accuracy.This accuracy can be achieved with two communication technologies, depending upon your needs in terms of working area coverage:

• RTK - Radio transmissionRTK can use a local ground based station which receives the same position data as themobile unit. By comparing the received position to its known actual position, the real timeerror can be calculated. This error is then transmitted via short wave radio to one or moremobile units. Radio repeaters can be positioned to fill in any areas of signal loss from thebase station. Signal loss could be caused by rugged terrain or thick vegetation.Any number of mobile units can be working from the correction signal.

• RTK VRS (Virtual Reference Station)A mobile terminal containing a SIM card is connected to the GPS receiver, and sends the received position to a central VRS server via the GPRS mobile phone network. At thesame time, a network of ground based stations is receiving the same position data. Theycompute the real time error, and send this over the internet to the VRS server. A positioncorrection for the mobile unit can then be calculated and sent back over the GPRS link.

• RTK GPS + GlonassBy using a GNSS receiver, on both the vehicle and the base station, position informationcan be read from the Glonass constellation at the same time as receiving messagesfrom the GPS constellation. By using messages from more satellites, position accuracycan be improved, or maintained in more areas. Combined use of the GPS and Glonassconstellations is particularly useful in the Northern or Southern hemispheres wheresatellite visibility is sometimes constrained by terrain or obstacles.

2.5 cm

0 1 2

RTK VRS

CHOOSE A SIMPLE AND VERSATILE SOLUTIONFor your new machine purchases, New Holland offers factory installed, fully integrated guidance solutions. If your existing fleet contains other brands, the New Holland GPS guidance offering has solutions for those as well.Regardless of your farm operation, the brands of your machines and your budget, this precision farming brochurewill help you determine which system is right for you.

HOW TO CHOOSE.

EGNOS OmniSTAR XP OmniSTAR HP RTK OmniSTAR VBS VRS/GPS/Glonass

PRECISION 20 cm 12 cm 10 cm 2.5 cm

APPLICATION

Spraying ● ● ● ●

Spreading ● ● ● ●

Tillage ● ● ● ●

Mapping ● ● ● ●

Mowing ● ● ● ●

Harvesting ● ● ●

Seeding ● ● ●

Hoeing ●

Bed Forming ●

Precision Planting ●

Strip Till ●

EGNOS OmniSTAR XP OmniSTAR HP RTK VRS/GPS RTK OmniSTAR VBS GPS+Glonass

PRECISION 20 cm 12 cm 10 cm 2.5 cm 2.5 cm

DISPLAY

EZ-Guide 250* ●

FM750 ● ● ● ● ●

FM-1000 ● ● ● ● ●

Intelliview™ III** ● ● ● ●

GUIDANCE

Manual ● O O

EZ-Steer ● ● ● O O

Autopilot O ● ● ● ●

IntelliSteer™ O ● ● ●

● Recommended O Possible* Only with EGNOS correction ** Only compatible with IntelliSteer™ system

GUIDANCE DISPLAYS.EZ-GUIDE 250 DISPLAY

8 9

MANUAL GUIDANCE WITH LIGHTBARThe entry level guidance solution allows you to explore GPSguidance through a simple and affordable lightbar display. A lightbar based guidance system provides you with quick on-line visual feed back to keep you on your intended path. The lightbar indicates in which direction you need to steer, and by how much you need to steer, to keep you tractor on line.

EZ-GUIDE 250 DISPLAYThe EZ-Guide 250 is a simple and affordable, user friendly tool offering you an accuracy of +/-20 cmpass-to-pass. The built in OnPath filter technology provides improved pass-to-pass accuracy. The EZ-Guide 250 is compatible with all makes and models.

GUIDANCE OPTIONS WITH EZ-GUIDE 250• Manual guidance – Lightbar.• Assisted guidance with EZ-Steer system.

ACCURACY LEVELS

• 11 cm colour screenChoose between planand 3D perspectiveviews, to see at a glancewhere you are and whatyou’ve been doing.

• 8 guidance patternsOffers the ultimate in guidanceflexibility, allowing you to work indifferent patterns and shapes that bestfit your field’s layout and contours.

• USB flash driveSimply transfer your day’scoverage maps to your computerusing a USB flash drive andeasily print out coverage reportsimport/ export fields andcoverage maps via USB.

• Built-in GPS receiverProvides submeter accuracy, or Egnos 20 cm pass-to-passaccuracy with optional antenna.

• Night or Day useSwitch to Night Mode forbetter visibility. Mark andlocate in-field hazards withfeature mapping. Findeasily the next path withSwathFinder assistance.

• OnPath filter technologyFor improved pass-to-passaccuracy.

• GPS data outputTo supply GPS positiondata to your combinedisplay for yieldmonitoring.

• Field Finder technologyAutomatically locate storedfields as you drive near them.

• Radar speed output

• 15 Bright guidance LEDsGive you quick on-line visualfeedback to keep you on track

15 20 25 30

20 cm

EGNOS OmniSTAR VBS

FM-750 DISPLAY

GUIDANCE OPTIONS WITH FM-750• Manual – Lightbar.• Assisted guidance with EZ-Steer system.• Integrated autoguidance – Autopilot.On autoguidance ready machines or as a retrofit package.

ACCURACY LEVELS

15 20 25 30

20 cm

EGNOS OmniSTAR VBS

10 cm

8 9 10 11

12 cm

9 10 11 12 13 14

OmniSTAR XP OmniSTAR HP2.5 cm

0 1 2

RTK GPS+GLONASS

2.5 cm

0 1 2

RTK VRS/GPS

THE CORNERSTONE OF GUIDANCE, CAPABLE OF 2.5 CM ACCURACY.The FM-750 has a built-in receiver that allows you to choose the accuracy your applicationrequires from +/-20 cm to +/-2.5 cm pass-to-pass, year-to-year. When you need a DGPSguidance system that saves you time, fuel and inputs, look no further than the FM-750.

• Supports Field -IQ crop input control systemsIt is a section control and variablerate application control system. It prevents seed and fertilizeroverlap and controls the rate ofseed, liquid or granular materials.

• Planter and sprayermonitoring and control

• 8 guidance patternsOffers the ultimate in guidanceflexibility, allowing you to workin different patterns and shapesthat best fit the layout andcontours of your field.

• Field Finder technologyAutomatically locate storedfields as you drive near them.

• USB flash driveSimply transfer your day’scoverage maps to yourcomputer using a USB flashdrive and easily print outcoverage reports import/export fields and coveragemaps via USB.

• 20.3 cm touch screenWith an all new intuitive user experience.Switch to NightMode for better visibilityat night. At row end, find easily the nextpath with SwathFinder assistance.

• Built-in GNSS receiverthat is GPS andGLONASS capable.

• 27 Bright guidance LEDsGive you quick on-linevisual feedback to keepyou on track.

• Attachable RTK Radio

• Dual external Video input

GUIDANCE DISPLAYS.FM-1000 DISPLAY

ACCURACY LEVELS

THE CUTTING EDGE OF TECHNOLOGY!The FM-1000 brings you the best performance and reliability with the industry leading dualintegrated GPS + GLONASS receivers. Capable of handling everything you need in guidance,steering, mapping at your fingertips the FM-1000 gives you a choice of accuracy between 20 cm and 2.5 cm pass-to-pass and year-to-year.

• Supports Field -IQ crop input control systemsIt is a section control and variablerate application control system. It prevents seed and fertilizeroverlap and controls the rate ofseed, liquid or granular materials.

• Large 30.73 cm touch screenBest visibility from a bright andlarge screen. Toggle betweenplan and 3D views or zoom in/outwith just a tap of your finger.

• GNSS (Global Navigation SatelliteSystem) dual receivers (Optional)Two GNSS compatible receiversprovide you with ultimate precisionfor both your tractor and theimplement you are pulling when you need it most.

• Internal radio (Optional)Integrated 430 to 470 Mhzradio for RTK correctionreception.

• TrueTracker: correct theposition of your implementto keep it on path.

• Planter and sprayermonitoring and control

• TrueGuide: correct theposition of your tractor tokeep the implement on path.

• 8 guidance patternsOffers the ultimate in guidanceflexibility, allowing you to workin different patterns and shapesthat best fit the layout andcontours of your field.

• Field Finder technologyAutomatically locate storedfields as you drive near them.

• USB flash driveSimply transfer your day’scoverage maps to yourcomputer using a USB flashdrive and easily print outcoverage reports import/export fields and coveragemaps via USB.

10 11

GUIDANCE OPTIONS WITH FM-1000• Manual - Lightbar.• Assisted guidance with EZ-Steer system.• Integrated autoguidance - Autopilot.On autoguidance ready machines or as a retrofit package. 15 20 25 30

20 cm

EGNOS OmniSTAR VBS

10 cm

8 9 10 11

12 cm

9 10 11 12 13 14

OmniSTAR XP OmniSTAR HP2.5 cm

0 1 2

RTK VRS/GPS2.5 cm

0 1 2

RTK GPS+GLONASS

ASSISTED GUIDANCE.EZ-STEER SYSTEM

• EZ-Steer controllerUsing data from the GPS receiver,the EZ-Steer controller sendsprecise instructions to the steeringwheel motor. T2 technologycontinually corrects for roll andyaw by using 2-axis solid stateinertial sensors to give you a trueon-ground position.

• EZ-Steer motorThe EZ-Steer motor receiveselectrical signals from the EZ-Steer controller and convertsthem to precise commands thatthe vehicle’s steering system uses to keep the vehicle on track.You can resume the control ofyour machine at anytime byturning the steering wheel.An optional foot switch allowsyou to engage and disengagethe EZ-Steer conveniently forhands-free farming.

THE WORLD’S SIMPLEST HANDS-FREE FARMING SYSTEMEZ-Steer is the world’s simplest portable hands-free farming system for all vehiclemodels, old and new.The EZ-Steer system turns the steering wheel for you by combining a frictionwheel and a drive motor, which is commanded indirectly, by an output from aguidance display.While the EZ-Steer keeps you on line on undulating land, ditches, waterways and terraces, you can focus on many different tasks, such as sprayer or planterperformance, improving job quality and crop yields while reducing stress.

T2 TERRAIN COMPENSATION TECHNOLOGYTerrain compensation technology calculates the difference between the GPSantenna’s location and the desired “working position” of the vehicle’s centerpoint on the ground. T2 technology improves your line accuracy whetheryou are working on an even slope, on undulating ground, or crossing aditch line or waterway.

• GPS receiver

• Position withoutterrain compensation

• Roll angle

• Position correctedby T2 technology

COMPATIBLE DISPLAYSThe EZ-Steer system can also bematched with EZ-Guide 250, EZ-Guide500, EZ-Guide Plus, FM-750 or FM-1000displays delivering down to +/-2.5 cmGPS accuracy with RTK technology*. *Not compatible with EZ-Guide 250.

INTELLIVIEW™ IIIMONITORThe IntelliView™ III colour touchscreen Monitor enables theprogramming and personalising of settings for auto guidance, andprovides the visual interface whenoperating the IntelliSteer™ System.

NAVIGATION CONTROLLER IIEmploying the industry leading T3 terraincompensation technology, the NavigationController II takes position information fromthe DGPS receiver, and sends precisesteering instructions to the vehicle.

NEW HOLLAND INTEGRATEDSTEERING SENSORThis unique steering sensor measureshighly accurate wheel angle information on all terrain and sends it to the NavigationController II providing faster correction and increased steering accuracy.

12 13

IntelliSteer is a fully integrated New Holland designed and developed Automatic Steering System.Available from the factory or as retrofit package, the IntelliSteer™ system maximize productivityfor optimal crop yields.

Matching DGPS or RTK Technology to fully integrated control, IntelliSteer helps ensure parallelpass to pass accuracy of up to 2,5 cm*. IntelliSteer is ideal for precision work in even the mostdemanding situations. It is designed to dramatically improve operator performance and comfort.

NEW HOLLAND INTEGRATED SOLUTIONS.INTELLISTEER™ AUTOMATIC STEERING SYSTEM.

INTELLISTEER ON AND OFF SIMPLICITYThe CommandGrip™ handle*incorporates a single button thatis used to activate the IntelliSteersystem. New Holland makesadvanced technology accessible. *T7, T8 and T9 tractors.

• GPS receiver

• Position corrected by T3 technology

• Roll angle

T3 TERRAIN COMPENSATIONTECHNOLOGYCorrects off-line errors created by vehicle roll, pitch or yaw.

• Position withoutterrain compensation

RTK BASE STATIONAn RTK base station includes a GPS+Glonass antenna,receiver and radio link toprovide RTK correction signalsto the auto-guidance system.

NH 262 RECEIVERThe New Holland 262 antenna receives the DGPSsignals to guide the vehicle. This antenna caneasily be transferred from tractor to tractor oreven to your combine. For RTK applications aslim profile radio mounts underneath the receiver.

• NEW HOLLAND VEHICLE INTERFACEReceives navigationcommands from theNavigation Controller II whichcontrol the vehicle’s steeringwhen engaged.

ALL WIRED UP READYThe New Holland IntelliSteer™ System uses built in steering angle sensors, or a solid stategyro, to keep the Navigation Controller II informed of wheel direction. Also integrated into thehydraulic system is a control valve which converts the signals from the Navigation Controller IIinto hydraulic movements of the steering system.

An additional benefit of using RTK correction with the IntelliSteer™ system is the guaranteedyear-to-year repeatability, which is becoming more important with today’s modern farmingtechniques. IntelliSteer with RTK is ideal for Controlled Traffic Farming (CTF) practices.All this and more at the touch of a button.*Using RTK correction signal.

GOOD GUIDANCE SAVES MONEYIntelliSteer helps improve overall operatingefficiency. In poor light or during long workingdays, precision driving is not compromised.Improved efficiency saves money. It is as simply as that.Based on 500 ha farm and 5m wide implement.Including tractor rental, fuel, labor, fertilizer/seed andchemical costs per ha.

AVAILABILITYIntelliSteer is available onyour New Holland T7, T8or T9 tractors as well asCX8000 and CR9000combines.

2,000

1,000

0

3,000

4,000

EGNOS

Tota

l cos

t sav

ings

with

auto

gui

danc

e (D

)

D1796

D2685

D3350

HP/XP RTK

14 15

NEW HOLLAND INTEGRATED SOLUTIONS.INTELLIVIEW™ III TOUCHSCREEN MONITOR.

ACCURACY LEVELS

ALL IN ONEThe IntelliView™ III display can be used throughout a farming operation and is fitted as standard equipment onyour New Holland T7, T8 or T9 tractors as well as CX5000, CX6000, CX8000, CR9000 and FR9000 harvesters.

The IntelliView™ III will communicate with the IntelliSteer system as well as the vehicle's CAN Bus, and displaymachine function information in real time on just one screen. Maximum operator comfort is provided on a 17.8 cmtouch screen display, see where you are and choose information you want to view, monitor and control.

PLUG AND PLAY ISO BUSCOMPATIBILITYThe IntelliView™ III in-cab information monitor can do so much more than detail tractor functions.Fully ISO BUS compatible, it can be used to operatea range of equipment to include balers and sprayers.This saves the need for a separate control within thecab and reduces the time to switch between jobs.

• Fingertip adjustment of all key settingsand compatible with theNew Holland IntelliSteer™guidance system.

• Monitor and record fieldperformance operationssuch as area and distance,fuel usage, hectares perhour and engine efficiencies,slip and work rate.

• ISOBUS compatible

• Yield, moisture and graintemperature monitoring

• Automatic crop settingmonitoring and control

• 17.8 cm touch screenWith an all new intuitiveuser experience.

15 20 25 30

20 cm

EGNOS OmniSTAR VBS

10 cm

8 9 10 11

12 cm

9 10 11 12 13 14

OmniSTAR XP OmniSTAR HP2.5 cm

0 1 2

RTK VRS/GPS

ULTIMATE COMFORTWith autoguidance you can relaxand consentrate on the implementsonly, with productivity gain.Moreover, thanks to the seat's 40°swivel angle and the SideWinder™II armrest*, the controls are alwayswhere you need them, no need forstretching or fumbling.*T7, T8 and T9 tractors.

• USB flash driveSimply transfer your day’scoverage maps to yourcomputer using a USB flashdrive and easily print outcoverage reports import/export fields and coveragemaps via USB.

• Guidance patternThe IntelliSteer™ System, when linked tothe IntelliView™ III Monitor, can performa number of different steering patterns.

• Up to three camerascan be linked to theIntelliView™ III system,perfect for monitoringimplements and avoidingblind spots.

corn

wheat

beans

rapeseed

sensor signal (volts)mas

s flo

w (

t/h)

ONE CALIBRATION PER SEASONTo reduce unproductive time when switchingbetween crops or when working in varying crop conditions, New Holland combines* feature an automatic crop setting system with fifty crop-specific settings. The operator has theopportunity to programme two harvest settingsfor each crop and can even save a setting forturning on the headland. The settings include reelspeed and position, rotor speed and concavesetting, sieve opening and cleaning fan speed.Furthermore there is no need to re-calibrate theyield sensor when switching between fields,crops or even between cereal and maize season. *CX5000, CX6000, CX8000 and CR9000 models

INTEGRATED NEW HOLLAND SYSTEMS HELP INCREASE YIELDSPrecision farming is integrated into the design of CX5000, CX6000, CX8000 and CR9000 combines to provide you with information to maximise crop and equipment performance. • Permanently register your yield and store it, linked to the precise location.• Prepare application maps for accurate, site-specific fertilising, seeding and spraying, thus increasing your profits.

AN INTEGRATED PACKAGE.New Holland Precision Land Management equipment is factory installed. Standard equipment includes:• Yield and moisture monitor for on-the-go yield and moisture readings with data logging.• Yield and moisture monitor with a DGPS receiver to set you up with on-screen yield mapping with data logging.• DGPS Antenna with Egnos capability• Desktop Software for yield mapping• Customer training and support for efficient and proper use of the Desktop SoftwareOn CX/CR IntelliSteer™ can either be fully factory installed, or is available as a retrofittable kit.On TC combines an Optical Yield sensor is available, the mapping software is the same as on CX and CR combines.

16 17

NEW HOLLAND INTEGRATED SOLUTIONS.EXCLUSIVE YIELD MEASURING SYSTEM.

REAL TIME MOISTURE SENSINGNew Holland’s moisture sensormeasures grain moisture in realtime. Samples are taken every 30 seconds and the data is sent to the IntelliView™ III monitor.Sensor calibration is required for each crop type.

YIELD MAPThe exclusive, patented, highaccuracy yield sensor, developed byNew Holland is generally recognisedas the “best in class”. Its design neutralises the rubbingeffect of the grain. Whatever the kind,the variety or the moisture content ofthe kernel, the sensor generates anextremely accurate yieldmeasurement.

THE ERA OF INTELLIGENT GRAPE HARVESTING BEGINS.Part of the Premium Viticulture concept, EnoControl™grape harvesters use GPS with embeddedmicrocomputers to gather information on parcels of landduring the growing cycle; this information is transformedby advanced vineyard management technology into aharvesting map that the machine reads in real time toautomatically sort the grapes into different hoppers duringharvesting. So only the best grapes go to make the finestwines. The improved harvesting quality, the optimisationof inputs, for example fertilisers and precision pruningmean more money stays in your pocket.

PREMIUM WINE ENOCONTROL™:GOLD MEDAL SITEVI 2009

RTS ROW TRACKING SYSTEMThe Row Tracking System, RTS, can be specifiedwith New Holland GPS guidance to automaticallytrack the worked rows. These are displayed on theIntelliView screen, enabling the operator to quicklyidentify the rows to be harvested. Work data can bestored on a USB memory stick for traceability.

AVAILABILITYBRAUD 9000L and Braud 9000M

18 19

NEW HOLLAND INTEGRATED SOLUTIONS.LASER-BASED SMARTSTEER™ SYSTEM EASES DRIVING.

PRECISION HARVESTING IN ALL CONDITIONS.Because SmartSteer™ system uses a laser beam instead of optical 3D recognition found on conventional trackingsystems, it operates perfectly in dusty conditions and at night.Combined with the New Holland PLM package, you getenhanced harvesting performance and improved yield mapping.

HOW IT WORKS.The SmartSteer™ system records the difference in time takenfor the laser beam to reflect from the stubble and the uncutcrop. Using this information the exact line of uncut crop can be detected and signals sent to the steering system. The insideedge of the combine header is then reliably guided preciselyalong the line of uncut crop with a high degree of precision.SmartSteer™ guidance system utilizes every last inch ofheader width. By comparing the height between uncut cropand stubble, it takes control and steers the combine to fill the header on every pass. On CX8000 and CR9000 the operator can set the laser scannerto detect crop edge on either the left or right hand side of theheader by adjustment from within the cab. On CX5000 andCX6000 only the left hand side of the header can be detected.Because the SmartSteer™ system is fitted to the combine itself, it remains independent of whichever header is fitted.

AVAILABILITYCX5000, CX6000, CX8000and CR9000.

AUTOMATIC ROW GUIDANCE SYSTEM

MAIZE HEADERS SOLUTIONA simple mechanical system ensures the combine or the forageharvester follows the crop rows. It takes the stress out of harvestingwhen using wide headers and high operating speeds or whenharvesting with bad visibility. More than just productivity increases, italso reduces operator fatigue, allowing full performance during harvest.

ARMS DEFLECTION BASED GUIDANCE SOLUTION.Touch sensor arms in the front of a row unit continuously monitor themaize row. Based on this information, the harvester electronic systemcontrols the steering valve and keeps the combine on course in anytype of maize crop.

AVAILABILITYCX5000, CX6000, CX8000,CR9000 and FR9000.

20 21

THE PRECISION YOU DEMANDThe Autopilot automated steering system used with an RTK signal will give a +/-2.5 cmrepeatability from plant to harvest with any field pattern. The Autopilot system can be integratedinto most brands of tractor and harvesting machinery.Using the machine’s electro hydraulic circuit to provide automatic guidance, this retrofit solutionwill significantly increase your efficiency during field preparation, planting and harvesting by driving more accurately and consistently during extended periods behind the wheel.

INTEGRATED RETROFIT GUIDANCEAUTOPILOT SYSTEM

• GPS receiver

• Positionwithout terraincompensation

• Roll angle

• Position correctedby T3 technology

AUTOSENSESTEERING SENSORThis unique steering sensormeasures highly accurate wheelangle information on all terrain andsends it to the Navigation Controller IIproviding faster correction andincreased steering accuracy.

NAVIGATION CONTROLLER IIEmploying the industry leading T3 terrain compensationtechnology, the Navigation Controller II takes positioninformation from the DGPS receiver, and sends precisesteering instructions to the vehicle.

T3 TERRAIN COMPENSATION TECHNOLOGYCorrects off-line errors created by vehicle roll, pitch or yaw.

COMPATIBLE DISPLAYSThe Autopilot System can be completed with EZ-Guide 500,FM-750 or FM-1000 display,delivering down to +/-2.5 cm GPSaccuracy with RTK technology.

EZ-REMOTEThe EZ-Remote joystick mountsto any tractor console, providingan even more convenient way tocontrol a variety of guidancedisplay functions from the cab.Enhances a wide range of tasks,from basic guidance operationsto more advanced operations.

IMPLEMENT GUIDANCE AND RTK INCREASE YOUR ACCURACY AND YIELDSThanks to a DGPS antenna mounted on the implement, the TrueGuide & TrueTracker systems keep your implementon a repeatable path on sloped fields with steep gradients. Retrofit installation kits are compatible with mostmanufacturers’ implements.

TRUE GUIDE – IMPLEMENT CONTROLThe TrueGuide implement guidance system uses the existing tractor Autopilot system to improve implement accuracy.There is no need to hang additional steering equipment on the implement just to get better control and minimize thedowndraft effect on severe hillsides. Let your Autopilot system pull the implement up the hill and hold the line. FM-1000 compatible.

TRUE TRACKER – TAKE FULL CONTROLThe TrueTracker system is an independent navigation system mounted on the implement that works with the tractorAutopilot system to provide you the highest level of accuracy. The TrueTracker system independently steers theimplement on a repeatable path even on extreme slopes and variable soils using one of many hydraulic solutions and T3 terrain compensation technology mounted on the implement. FM-1000 compatible.

RTK BASE STATIONAn RTK base station includes aGPS+Glonass antenna, receiver and radio link to provide RTKcorrection signals to the auto-guidance system.

ANTENNAMounts onto the tractor oronto the implement to provideup to 2.5 cm pass-to-passand year-to-year accuracy.

VEHICLE INTERFACEReceives navigation commandsfrom the Navigation Controller IIwhich controls the vehicle’ssteering when engaged.

22 23

BEYOND THE FIELDMAP IT, ANALYSE IT AND PRINT IT.

Many variables apply in farming; it is key to understand what is happening and why. It’s time tomanage your farming operation on a new level by making decisions based on facts. With theNew Holland’s Precision Farming Software you can see field by field the tasks performed, the workrates achieved, the fuel used during each task and most importantly your yield.Plan for the future today.

PRACTICAL SOFTWARE FOR OPTIMUM USE.All machines equipped with the New Holland’s DGPS system allows you to use the valuable fielddata you collect to prepare yield maps and better understand yield variations. Yield and moisturereadings are stored on a USB flash drive, which you can download into your desktop computer.

NEW HOLLAND’S PRECISION FARMING SOFTWAREUsing New Holland’s Precision Farming Software, the data can be viewed and thoroughlyanalysed. The desktop software allows for mapping and data conversion from the yield monitorsystem and is capable of reading and processing yield data from many competitive brandsystems. From such analysis, prescriptive maps can be constructed for variable rate application.

PROFESSIONAL CUSTOMER SUPPORTTo support New Holland customers who havepurchased Precision Farming and Auto Guidanceproducts, a purpose built website called the PLMPortal has been created.

PRECISION FARMING – PLM PORTAL.

WWW.NEWHOLLANDPLM.COM

The PLM Portal is available to all New Hollandcustomers and can be accessed from the followingweb address: www.newhollandplm.com.Once you have signed into the website you can gainaccess to advanced information on all New HollandPrecision Farming and Auto Guidance systems.For New Holland’s Precision Farming softwarecustomers, a purpose built section of the websiteprovides training videos and information forcustomer support.

TAILORED TRAININGCustomers who have purchased a PLM-SupportPackage will receive a special PLM key which willenable them to sign-up for training courses andaccess individual on-line support for the PrecisionFarming Desktop software.

PLM SYSTEMS AND PACKAGES AT YOUR DEALERSHIP.

Your New Holland dealership is your port of call for assistance and advice on PLM systems.Go to your dealer today: you will find the full New Holland PLM offering together with a widechoice of PLM packages, including startingtraining and credit solutions. Ask your dealer and discover the package that better suits your needs.

AT YOUR OWN DEALER

The data indicated in this folder are approximate.The models described here can be subjected to modifications without any notice by the manufacturer.The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for anyfurther information. Published by New Holland Brand Communications. Bts Adv. - Printed in Italy - 06/11 - TP01 - (Turin) - 118001/COM

Visit our web site for UK: www.newholland.com/uk - for ROI: www.newholland.com/ie New

Ho

llan

dp

refe

rs

lu

bri

can

ts

For more details, ask your New Holland dealer!

NEW HOLLAND TOP SERVICE:CUSTOMER SUPPORT AND CUSTOMER INFORMATION

TOP AVAILABILITY.If you need information,or have an out of hoursquestion, ring our toll-freenumber*.All day, everyday, we are just a call away.

TOP SPEED.Express parts delivery:when you need it,where you need it!

TOP PRIORITY.Fast-track solution duringthe season: because your harvest can’t wait!

TOP SATISFACTION.We drive and track the solution you need,keeping you informed:until you are 100% satisfied!

* Calls to the Top Service team are free from landlines in the United Kingdom and Republic of Ireland. UK-based mobile calls are also free, but Republic of Ireland mobile users should call 01 2421881 andthis will be charged at your standard network rate.