Ahead in cell innovaon 0 0,2 0,4 0,6 0,8 1 0 50 100 150 200 250 300 350 400 450 500 Normalized capacity [%] Cycle RESTORED CAPACITY VS. TEMPERATURE Cycling • CC-HT 75 °C • CC-HT 150 °C • CC-HT 125 °C • CC-HT Room temperature 80 °C (Competitor) • Standard Lithium-Ion • CC-HT 100 °C 75 °C New high temperature technology from CUSTOMCELLS® RECHARGEABLE LI-ION BATTERY CELLS TEMPERATURE RESISTANT UP TO 150 °C Previously available lithium-ion baery cells are usually limited to a very narrow temperature range, which is close to room temperature. Even at slightly higher temperatures, such as in a car during summer me, lithium-ion baeries can be damaged. For example, if lithium-ion baeries from power tools are leſt in the trunk of a car. Other energy storage systems such as lithium metal baeries may allow for higher applicaon temperatures under certain circumstances, but at the same me have a high-risk potenal and are not rechargeable. Sll other baery systems only tolerate a temperature range of few degrees higher than that of classic lithium-ion baeries, but again do not cover the very high temperatures that occur, for example, during autoclaving of medical products or deep geological drilling. + YOUR STORAGE SOLUTION FOR AN EXTENDED TEMPERATURE RANGE - With its rechargeable high-temperature technology, CUSTOMCELLS® offers a soluon that sasfies the most important requirements such as parcularly high intrinsic safety, reliability and performance at parcularly high temperatures of up to 150 °C. This combinaon of outstanding properes is parcularly well suited for demanding applicaons in a wide range of fields such as medical technology or in the oil & gas industry. + HIGH TEMPERATURE TECHNOLOGY IN COMPETITOR COMPARISON - Standard Lithium-Ion Competitor HT Lithium-Ion Secondary Competitor HT Lithium Primary CUSTOMCELLS® HT Lithium-Ion Secondary NiMH -20 to 60 °C 0 to 125 °C -40 to 150 °C 0 to 150 °C -30 to 85 °C Temperature -40°C 0 °C 150 °C EXEMPLARY APPLICATIONS ILLUSTRATION NOTES Convenonal lithium-ion baery cells only guarantee a high life expectancy within a very limited temperature range (typically 0-40 °C). They age quickly when operated or stored at temperatures above 60 °C. This is reflected in a very rapid reducon in storage capacity. The lithium-ion high-temperature technology of CUSTOMCELLS® enables parcularly long operang mes at elevated temperatures. The comparison with a previously available lithium-ion baery for higher temperatures shows the technological advantage of the new development of CUSTOMCELLS®. CUSTOMCELLS® high-temperature technology means that the life (remaining capacity of 80%) of a baery cell at 75 °C is significantly longer. At unusually high temperatures, the cell with new technology - compared to previous rechargeable baery cells - can be in use for much longer periods of me. + + HIGH TEMPERATURE TECHNOLOGY – USE IN VARIOUS APPLICATIONS - In the field of medical devices, high-temperature baery technology is suitable, for example, for the wireless power supply of devices that have to be sterilized above 120 °C. In the oil & gas sector, the new baery technology is suitable, for example, for the power supply of logging and monitoring equipment in combinaon with a generator. In the context of industrial plants, high-temperature baery technology is relevant e.g. as an energy back-up system for servomotors in safety-crical areas where high temperatures occur in the event of a disaster, but where lithium metal baeries should be avoided for safety reasons. The CUSTOMCELLS® high temperature technology is also suitable for the area of monitoring and surveillance - especially in safety-relevant or parcularly hazardous areas - where high ambient temperatures can occur. + THE HIGH TEMPERATURE TECHNOLOGY IS FLEXIBLE IN FORMAT - The CUSTOMCELLS® high temperature baery technology can be manufactured in various sizes in hard cases. Starng with a DD cell size with M8 terminals, a number of other cell sizes can be realized in flexible or standardized dimensions. CUSTOMCELLS® accompanies customers from the inial adaptaon of the cell to the specific applicaon, through the invesgaon of technical feasibility and the construcon of pilot series including relevant tests, to further development of the series product including cerficaon for a wide range of applicaons. + YOUR CONTACT FOR HIGH TEMPERATURE TECHNOLOGY - Benno Leuthner Head of Project Planning / Sales Custom Cells Itzehoe GmbH Fraunhoferstr. 1b 25524 Itzehoe - Germany Dr. Christopher Wolter Director of Product Development Custom Cells Itzehoe GmbH Fraunhoferstr. 1b 25524 Itzehoe - Germany MORE INFORMATION: P: +49 4821 - 133 92 00 M: [email protected] www.customcells.org GENERAL INFORMATION KEY FEATURES CUSTOMIZING BENEFITS OIL & GAS MEDICAL INDUSTRY DEFENSE INDUSTRIAL PHOTOVOLTAIK - 2019 developed - For various special applicaons - Oil & gas / PV / medical / defense - Fulfillment of highest safety standards - Manufactured in EU - Hard case cells in different formats and capacies - Operaon at wide temperature range - Rechargeable up to 150 °C - Safety tested up to 170 °C - Temperature range: 0 to 150 °C CUSTOMCELLS® HT-Li-Ion rechargeable cells can be customized in different cylindrical and prismac sizes as well as performance wise to different applicaons. - Rechargeable at elevated temperatures - Adaptable cell geometry for different baery setups - Very safe, durable and stable up to 150 °C - MWD/LWD/D - Inspecon - Pipeline Inspecon (PIG) - Low magnec signature Sterilizable Safe to use and reliable under extreme condions (over 50 °C) Safe to use and reliable under extreme condions (over 50 °C) Safe to use and reliable under high ambient temperatures (over 50 °C) + + +
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Ahead in cell innova�on
0
0,2
0,4
0,6
0,8
1
0 50 100 150 200 250 300 350 400 450 500
Norm
alize
d ca
pacit
y [%
]
Cycle
RESTORED CAPACITY VS. TEMPERATURECycling
• CC-HT 75 °C
• CC-HT 150 °C
• CC-HT 125 °C
• CC-HT Room temperature
80 °C (Competitor)
• Standard Lithium-Ion
• CC-HT 100 °C
75 °C
New high temperature technology from CUSTOMCELLS® RECHARGEABLE LI-ION BATTERY CELLS TEMPERATURE RESISTANT UP TO 150 °C
Previously available lithium-ion battery cells are usually limited to a very narrow temperature range, which is close to room temperature. Even at slightly higher temperatures, such as in a car during summer time, lithium-ion batteries can be damaged. For example, if lithium-ion batteries from power tools are left in the trunk of a car. Other energy storage systems such as lithium metal batteries may allow for higher application temperatures under certain circumstances, but at the same time have a high-risk potential and are not rechargeable. Still other battery systems only tolerate a temperature range of few degrees higher than that of classic lithium-ion batteries, but again do not cover the very high temperatures that occur, for example, during autoclaving of medical products or deep geological drilling.
+ YOUR STORAGE SOLUTION FOR AN EXTENDED TEMPERATURE RANGE -
With its rechargeable high-temperature technology, CUSTOMCELLS® offers a solution that satisfies the most important requirements such as particularly high intrinsic safety, reliability and performance at particularly high temperatures of up to 150 °C. This combination of outstanding properties is particularly well suited for demanding applications in a wide range of fields such as medical technology or in the oil & gas industry.
+ HIGH TEMPERATURE TECHNOLOGY IN COMPETITOR COMPARISON -
Standard Lithium-Ion
Competitor HT Lithium-Ion Secondary
Competitor HT Lithium Primary
CUSTOMCELLS® HT Lithium-Ion Secondary
NiMH
-20 to 60 °C
0 to 125 °C
-40 to 150 °C
0 to 150 °C
-30 to 85 °C
Temperature-40°C 0 °C 150 °C
EXEMPLARYAPPLICATIONS
ILLUSTRATION NOTES
Conventional lithium-ion battery cells only guarantee a high life expectancy within a very limited temperature range (typically 0-40 °C). They age quickly when operated or stored at temperatures above 60 °C. This is reflected in a very rapid reduction in storage capacity.
The lithium-ion high-temperature technology of CUSTOMCELLS® enables particularly long operating times at elevated temperatures. The comparison with a previously available lithium-ion battery for higher temperatures shows the technological advantage of the new development of CUSTOMCELLS®.
CUSTOMCELLS® high-temperature technology means that the life (remaining capacity of 80%) of a battery cell at 75 °C is significantly longer.
At unusually high temperatures, the cell with new technology - compared to previous rechargeable battery cells - can be in use for much longer periods of time.
+
+ HIGH TEMPERATURE TECHNOLOGY – USE IN VARIOUS APPLICATIONS -
In the field of medical devices, high-temperature battery technology is suitable, for example, for the wireless power supply of devices that have to be sterilized above 120 °C. In the oil & gas sector, the new battery technology is suitable, for example, for the power supply of logging and monitoring equipment in combination with a generator. In the context of industrial plants, high-temperature battery technology is relevant e.g. as an energy back-up system for servomotors in safety-critical areas where high temperatures occur in the event of a disaster, but where lithium metal batteries should be avoided for safety reasons.
The CUSTOMCELLS® high temperature technology is also suitable for the area of monitoring and surveillance - especially in safety-relevant or particularly hazardous areas - where high ambient temperatures can occur.
+ THE HIGH TEMPERATURE TECHNOLOGY IS FLEXIBLE IN FORMAT -
The CUSTOMCELLS® high temperature battery technology can be manufactured in various sizes in hard cases. Starting with a DD cell size with M8 terminals, a number of other cell sizes can be realized in flexible or standardized dimensions. CUSTOMCELLS® accompanies customers from the initial adaptation of the cell to the specific application, through the investigation of technical feasibility and the construction of pilot series including relevant tests, to further development of the series product including certification for a wide range of applications.
+ YOUR CONTACT FOR HIGH TEMPERATURE TECHNOLOGY -
Benno LeuthnerHead of Project Planning / SalesCustom Cells Itzehoe GmbHFraunhoferstr. 1b25524 Itzehoe - Germany
Dr. Christopher WolterDirector of Product DevelopmentCustom Cells Itzehoe GmbHFraunhoferstr. 1b25524 Itzehoe - Germany
MORE INFORMATION: P: +49 4821 - 133 92 00M: [email protected]
GENERAL INFORMATION
KEY FEATURES
CUSTOMIZING
BENEFITS
OIL & GAS
MEDICAL INDUSTRY
DEFENSE
INDUSTRIAL
PHOTOVOLTAIK
- 2019 developed- For various special applications
- Oil & gas / PV / medical / defense- Fulfillment of highest safety
standards- Manufactured in EU
- Hard case cells in different formats and capacities
- Operation at wide temperature range
- Rechargeable up to 150 °C- Safety tested up to 170 °C
- Temperature range: 0 to 150 °C
CUSTOMCELLS® HT-Li-Ion rechargeable cells can be
customized in different cylindrical and prismatic sizes as well as performance wise to different
applications.
- Rechargeable at elevated temperatures
- Adaptable cell geometry for different battery setups
- Very safe, durable and stable up to 150 °C
- MWD/LWD/D- Inspection
- Pipeline Inspection (PIG)- Low magnetic signature
Sterilizable
Safe to use and reliableunder extreme conditions
(over 50 °C)
Safe to use and reliableunder extreme conditions
(over 50 °C)
Safe to use and reliableunder high ambient
temperatures(over 50 °C)
+
+
+
Related Documents
