SHEET INDEX: A0.0 COVER SHEET A1.1 MAIN & SECOND FLOOR PLAN A2.1 ELEVATIONS A5.1 PERSPECTIVES PROJECT DIRECTORY: DESIGNER: RYAN HOYT DESIGNS INC. 250.999.9893 [email protected]STRUCTURAL ENGINEER: GENERAL CONTRACTOR: TBD TBD SURVEYOR: J.E. ANDERSON & ASSOCIATES 250.727.2214 SCOPE OF WORK: CONSTRUCTION OF A NEW SINGLE FAMILY DWELLING PROJECT INFORMATION: SITE ADDRESS: 1906 FERNDALE ROAD SAANICH, B.C. V8N 2Y3 LOT 3, PLAN VIP6446, SECTION 85, LAND DISTRICT 57 1906 Ferndale Road SAANICH, BC NEW CUSTOM HOME: PROPOSED HOUSE FOOTPRINT PROPOSED DRIVEWAY PATIO LINE OF ROOF OVER (TYP.) SETBACK PER ORIGINAL SUBDIVISON PLAN PROPOSED NEW SETBACK PROPOSED NEW LOT LINE ORIGINAL LOT LINE Ryan Hoyt Designs Inc. Suite 207, 4475 Viewmont Ave. Victoria, BC V8Z 6L8 250.999.9893 [email protected]www.ryanhoytdesigns.com GENERAL NOTES: Sheet: Project No.: Project: Sheet Title: 1. All drawings, plans, models, designs, specifications and other documents prepared by Ryan Hoyt Designs (RHD) and used in connection with this project are instruments of service for the work shown in them (the "Work") and as such are and remain the property of RHD whether the work isexecuted or not, and RHD reserves the copyright in them and in the Work executed from them, and they shall not be used for any other work or project. 2. It is the responsibility of the Contractor to verify all dimensions, elevations, and site conditions as applicable to the project and the proposed work. The Contractor shall notify the Designer of any errors, omissions or discrepancies identified within the drawings prior to commencement of the work. Commencement of construction or any part thereof constitutes acceptance of the drawings, acceptance of the existing site conditions, and means dimensions and elevations have been considered, verified and are acceptable. 3. 4. The Contractor shall engage a Professional Engineer licensed in the Province of BC for the design and field review of all structural components and systems within the work as required by the Authority Having Jurisdiction. Prior to commencement of the work, the Contractor shall notify RHD of any changes to the design required by the Structural Engineer, truss manufacturer or other engineered component supplier. The Contractor shall work with a B.C.L.S. to verify compliant placement, siting and elevation of the proposed buildings or structures on the property prior to commencing the work. RHD is not responsible for any encroachments with respect to elevation, siting or placement. Any proposed changes with respect to elevation, siting or placement shall be confirmed with a B.C.L.S. prior to execution. 1 1906 Ferndale - Lot 3 Cover Sheet 180011 A0.0 KEY PLAN: D a t e : D e s c r i p t i o n : B y : N o . : C o m m e n t s : 1 8 O c t 2 4 C o n c e p t 1 R H 1 1 : 100 1 Site Plan
4
Embed
NEW CUSTOM HOME: 1906 Ferndale Road€¦ · a1.1 main & second floor plan a2.1 elevations a5.1 perspectives project directory: designer: ryan hoyt designs inc. 250.999.9893 [email protected]
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
SITE ADDRESS: 1906 FERNDALE ROADSAANICH, B.C.V8N 2Y3
LOT 3, PLAN VIP6446, SECTION 85, LAND DISTRICT 57
1906 Ferndale RoadSAANICH, BC
NEW CUSTOM HOME:
PROPOSED HOUSE FOOTPRINT
PROPOSED DRIVEWAY
PATIO
LINE OF ROOF OVER (TYP.)
SETBACK PER ORIGINAL SUBDIVISON PLAN
PROPOSED NEW SETBACK
PROPOSED NEW LOT LINE
ORIGINAL LOT LINE
Ry
an H
oy
t D
esig
ns I
nc.
Suit
e 2
07
, 4
47
5 V
iew
mont
Ave.
Vic
tori
a, B
C V
8Z
6L
8
25
0.9
99
.98
93
Info
@ry
anhoy
tdesig
ns.c
om
ww
w.r
yanhoy
tdesig
ns.c
om
GENERAL NOTES:
She
et:
Pro
ject
No.:
Pro
ject:
Shee
t T
itle
:
1. All drawings, plans, models, designs, specifications and other documents prepared by Ryan Hoyt Designs (RHD) and used in connection with this project are instruments of service for the work shown in them (the "Work") and as such are and remain the property of RHD whether the work isexecuted or not, and RHD reserves the copyright in them and in the Work executed from them, and they shall not be used for any other work or project.
2. It is the responsibility of the Contractor to verify all dimensions, elevations, and site conditions as applicable to the project and the proposed work. The Contractor shall notify the Designer of any errors, omissions or discrepancies identified within the drawings prior to commencement of the work. Commencement of construction or any part thereof constitutes acceptance of the drawings, acceptance of the existing site conditions, and means dimensions and elevations have been considered, verified and are acceptable.
3.
4. The Contractor shall engage a Professional Engineer licensed in the Province of BC for the design and field review of all structural components and systems within the work as required by the Authority Having Jurisdiction. Prior to commencement of the work, the Contractor shall notify RHD of any changes to the design required by the Structural Engineer, truss manufacturer or other engineered component supplier.
The Contractor shall work with a B.C.L.S. to verify compliant placement, siting and elevation of the proposed buildings or structures on the property prior to commencing the work. RHD is not responsible for any encroachments with respect to elevation, siting or placement. Any proposed changes with respect to elevation, siting or placement shall be confirmed with a B.C.L.S. prior to execution.
1. All drawings, plans, models, designs, specifications and other documents prepared by Ryan Hoyt Designs (RHD) and used in connection with this project are instruments of service for the work shown in them (the "Work") and as such are and remain the property of RHD whether the work isexecuted or not, and RHD reserves the copyright in them and in the Work executed from them, and they shall not be used for any other work or project.
2. It is the responsibility of the Contractor to verify all dimensions, elevations, and site conditions as applicable to the project and the proposed work. The Contractor shall notify the Designer of any errors, omissions or discrepancies identified within the drawings prior to commencement of the work. Commencement of construction or any part thereof constitutes acceptance of the drawings, acceptance of the existing site conditions, and means dimensions and elevations have been considered, verified and are acceptable.
3.
4. The Contractor shall engage a Professional Engineer licensed in the Province of BC for the design and field review of all structural components and systems within the work as required by the Authority Having Jurisdiction. Prior to commencement of the work, the Contractor shall notify RHD of any changes to the design required by the Structural Engineer, truss manufacturer or other engineered component supplier.
The Contractor shall work with a B.C.L.S. to verify compliant placement, siting and elevation of the proposed buildings or structures on the property prior to commencing the work. RHD is not responsible for any encroachments with respect to elevation, siting or placement. Any proposed changes with respect to elevation, siting or placement shall be confirmed with a B.C.L.S. prior to execution.
1
190
6 F
ern
dale
- L
ot
3
Ma
in &
Secon
d F
loo
rP
lan
180011
A1.10 5 10 15 2012345
DRAWING SCALE: " = 1' - 0" ALL MEASUREMENTS ARE IN FEET1/4"
Date
:D
escription:
By:
No.:
Co
mm
ents
:
18O
ct 2
4C
oncept 1
RH
1
1/4" = 1'-0"1
Main Floor
1/4" = 1'-0"2
Second Floor
FLOOR AREA
UPPER:
MAIN:
GARAGE:
TOTAL LIVING SPACE:
1314 SF
1531 SF
2845 SF
492 SF
TOTAL BUILDING SF: 3337 SF
Ry
an H
oy
t D
esig
ns I
nc.
Suit
e 2
07
, 4
47
5 V
iew
mont
Ave.
Vic
tori
a, B
C V
8Z
6L
8
25
0.9
99
.98
93
Info
@ry
anhoy
tdesig
ns.c
om
ww
w.r
yanhoy
tdesig
ns.c
om
GENERAL NOTES:
She
et:
Pro
ject
No.:
Pro
ject:
Shee
t T
itle
:
1. All drawings, plans, models, designs, specifications and other documents prepared by Ryan Hoyt Designs (RHD) and used in connection with this project are instruments of service for the work shown in them (the "Work") and as such are and remain the property of RHD whether the work isexecuted or not, and RHD reserves the copyright in them and in the Work executed from them, and they shall not be used for any other work or project.
2. It is the responsibility of the Contractor to verify all dimensions, elevations, and site conditions as applicable to the project and the proposed work. The Contractor shall notify the Designer of any errors, omissions or discrepancies identified within the drawings prior to commencement of the work. Commencement of construction or any part thereof constitutes acceptance of the drawings, acceptance of the existing site conditions, and means dimensions and elevations have been considered, verified and are acceptable.
3.
4. The Contractor shall engage a Professional Engineer licensed in the Province of BC for the design and field review of all structural components and systems within the work as required by the Authority Having Jurisdiction. Prior to commencement of the work, the Contractor shall notify RHD of any changes to the design required by the Structural Engineer, truss manufacturer or other engineered component supplier.
The Contractor shall work with a B.C.L.S. to verify compliant placement, siting and elevation of the proposed buildings or structures on the property prior to commencing the work. RHD is not responsible for any encroachments with respect to elevation, siting or placement. Any proposed changes with respect to elevation, siting or placement shall be confirmed with a B.C.L.S. prior to execution.
1
190
6 F
ern
dale
- L
ot
3
Ele
vation
s
180011
A2.1
Date
:D
escription:
By:
No.:
Co
mm
ents
:
18O
ct 2
4C
oncept 1
RH
1
1/4" = 1'-0"2
South - Rear
1/4" = 1'-0"3
North - Front
0 5 10 15 2012345
DRAWING SCALE: " = 1' - 0" ALL MEASUREMENTS ARE IN FEET1/4"
1/4" = 1'-0"1
East
1/4" = 1'-0"4
West
Ry
an H
oy
t D
esig
ns I
nc.
Suit
e 2
07
, 4
47
5 V
iew
mont
Ave.
Vic
tori
a, B
C V
8Z
6L
8
25
0.9
99
.98
93
Info
@ry
anhoy
tdesig
ns.c
om
ww
w.r
yanhoy
tdesig
ns.c
om
GENERAL NOTES:
She
et:
Pro
ject
No.:
Pro
ject:
Shee
t T
itle
:
1. All drawings, plans, models, designs, specifications and other documents prepared by Ryan Hoyt Designs (RHD) and used in connection with this project are instruments of service for the work shown in them (the "Work") and as such are and remain the property of RHD whether the work isexecuted or not, and RHD reserves the copyright in them and in the Work executed from them, and they shall not be used for any other work or project.
2. It is the responsibility of the Contractor to verify all dimensions, elevations, and site conditions as applicable to the project and the proposed work. The Contractor shall notify the Designer of any errors, omissions or discrepancies identified within the drawings prior to commencement of the work. Commencement of construction or any part thereof constitutes acceptance of the drawings, acceptance of the existing site conditions, and means dimensions and elevations have been considered, verified and are acceptable.
3.
4. The Contractor shall engage a Professional Engineer licensed in the Province of BC for the design and field review of all structural components and systems within the work as required by the Authority Having Jurisdiction. Prior to commencement of the work, the Contractor shall notify RHD of any changes to the design required by the Structural Engineer, truss manufacturer or other engineered component supplier.
The Contractor shall work with a B.C.L.S. to verify compliant placement, siting and elevation of the proposed buildings or structures on the property prior to commencing the work. RHD is not responsible for any encroachments with respect to elevation, siting or placement. Any proposed changes with respect to elevation, siting or placement shall be confirmed with a B.C.L.S. prior to execution.