WWW.HGFILM.COM.CN 华光-绿色印刷推动者 华光-绿色印刷推动者 18 17 B ased on Huaguang UV-P plate, UVP-II is a new generation of CTcP plate to meet the market requirements for speed and efficiency. The new photosensitive layer and stable production process not only increase its sensitivity (25% higher) but also maintain the excellent performance of plate making and printing same to UV-P. UVP-II, with good developing and plate-making compatibity, is the best choice for offset packaging and commercial printing. Technical Specification Processing Conditions new CTcP Plate UV-PII-type UV-CTP plate, also used as high sensitivity PS plate. Commercial sheetfed and rotary press printing Electrochemically grained and anodized aluminum 0.15/0.20/0.25/0.30/0.40 mm Blue-Green 350-460nm UV light, especially 400-410nm UV laser 40±5 mW(Cron UV-4632CI platesetter Parameter 1000 rpm) 2-98% @ 250 lpi.( The difference between plate-making equipment will be different) main UV-CTP platesetters such as Cron,luscher,Amsky,basysPrint. (unbaked)18 months, run length will be different when used in different conditions such as printing presses/paper/ink/printing chemicals and etc,. Yellow light 18 months under recommended storage conditions Huaguang PD positive PS plate developer 1:3-1:4 24±1°C 20-30s Room temperature 50°C 100—150 ml/m 2 Plate Type Application Substrate Gauge Final image color Spectral sensitivity Relative Sensitivity Resolution Applicable platesetter Run length Safelights Run length Developer The ratio of developing solution (PD: water) Developing temperature Developing time Washing temperature Drying temperature Replenishing Rate The processing of UV-PII may follow UV-P processing conditions. Huaguang positive PS plate developer (PD) is recommended. Recommended conditions: The above parameter is obtained by Cron UV-4632CI platesetter, user can change above conditions according to specific equipment.