-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
1/1
NETWRIX AUDITOR FOR SQLSERVER
QUICK-START GUIDE
Copyright 2014 Netwrix Corporation. All Rights Reserved.
January 2014
Product Version: 5.0
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
2/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 2 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Legal Notice
The information in this publication is furnished for information
use only, and does not constitute a
commitment from Netwrix Corporation of any features or functions
discussed. Netwrix Corporation
assumes no responsibility or liability for the accuracy of the
information presented, which is subject
to change without notice.
Netwrix is a registered trademark of Netwrix Corporation. The
Netwrix logo and all other Netwrix
product or service names and slogans are registered trademarks
or trademarks of NetwrixCorporation. Active Directory is a
trademark of Microsoft Corporation. All other trademarks and
registered trademarks are property of their respective
owners.
Disclaimers
This document may contain information regarding the use and
installation of non-Netwrix products.
Please note that this information is provided as a courtesy to
assist you. While Netwrix tries to ensure
that this information accurately reflects the information
provided by the supplier, please refer to the
materials provided with any non-Netwrix product and contact the
supplier for confirmation. Netwrix
Corporation assumes no responsibility or liability for incorrect
or incomplete information provided
about non-Netwrix products.
2014 Netwrix Corporation.
All rights reserved.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
3/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 3 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Table of Contents
1.
INTRODUCTION.............................................................................
4
1.1. Overview
...........................................................................
4
1.2. How This Guide Is Organized
.................................................... 4
1.3. Free Pre-Sales Support
........................................................... 41.4.
Key Features and Benefits
....................................................... 4
1.5. Product Workflow
.................................................................
5
2. INSTALLING NETWRIX AUDITOR FOR
SQLSERVER........................................... 6
2.1. Installation Prerequisites
........................................................ 6
2.1.1..Hardware Requirements
................................................. 6
2.1.2..Software Requirements
.................................................. 6
2.1.3..Supported Environments
................................................. 6
2.2. Installing Netwrix Auditor for SQL
Server...................................... 7
3. CONFIGURING MANAGED
OBJECT...........................................................
8
4. RUNNING THE INITIAL DATA
COLLECTION.................................................. 14
5. MONITORING SQLSERVER FOR
CHANGES.................................................. 15
5.1. Making Test Changes
.............................................................
15
5.2. Receiving a Change Summary
.................................................. 15
A APPENDIX:RELATED
DOCUMENTATION.....................................................
17
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
4/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 4 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
1. INTRODUCTION1.1.Overview
This guide is intended for the first-time users of Netwrix
Auditor for SQL Server. It is designed
for evaluation purposes, therefore it is recommended to read it
sequentially and following the
instructions in the order they are provided. After reading this
guide you will be able to:
Install and configure Netwrix Auditor for SQL Server Create a
Managed Object Run data collection See how changes to the monitored
SQL Server are reported.
For evaluation purposes, this guide only covers basic
configuration and usage options of the
SQL Server Auditing feature. For information on how to use other
product features, refer to the
corresponding documentation (seeAppendix: Related
Documentationfor links).
1.2.How This Guide Is OrganizedThis section explains how this
guide is organized and provides a brief overview of each
chapter.
Chapter1 Introductionis the current chapter. It explains the
purpose of this document,defines its audience and explains its
structure. This chapter also provides an overview
of Netwrix Auditor for SQL Server, lists its main features and
benefits, and explains
the product workflow.
Chapter 2 Installing Netwrix Auditor for SQL Server lists all
hardware and softwarerequirements for the Netwrix Auditor for SQL
Server installation and explains how to
setup the product.
Chapter3 Configuring Managed Objectexplains how to configure a
Managed Objectthat represents the audited SQL Server.
Chapter4 Running the Initial Data Collectionexplains how to run
data collection toperform the initial analysis of the monitored SQL
Serverscurrent configuration state.
Chapter5 Monitoring SQL Server for Changesprovides instructions
on how to maketest changes to the audited SQL Serversconfiguration,
and see how they are reported
by the product.
Appendix: Related Documentationcontains a list of all documents
published to supportNetwrix Auditor for SQL Server.
1.3.Free Pre-Sales SupportYou are eligible for free technical
support during the evaluation period. If you encounter any
problems, or would like assistance with the installation,
configuration or implementation of
Netwrix Auditor for SQL Server,contact Netwrix support
specialists.
1.4.Key Features and BenefitsNetwrix Auditor for SQL Server
helps you perform the following auditing and reporting tasks:
Monitor day-to-day administrative activities: the product
captures detailedinformation on all changes made to the monitored
SQL Servers configuration and
database contents, including the information on WHO changed
WHAT, WHEN andWHERE. Reports also contain the before and after
values for each change.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/support_ticket.htmlhttp://www.netwrix.com/support_ticket.htmlhttp://www.netwrix.com/support_ticket.htmlhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
5/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 5 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Sustain complianceby using in-depth change information. Audit
data can be archivedand stored for more than 7 years.
Netwrix Auditor for SQL Server includes the following
features:
Table 1: Netwrix Auditor for SQL Server Features OverviewFeature
Description
SQL Server Auditing Netwrix Auditor allows tracking and
reporting on all changes made toyour SQL servers configuration and
database content.
Windows Server Auditing Netwrix Auditor allows tracking and
reporting on all changes made toWindows servers configuration,
including hardware devices, drivers,software, services,
applications, networking settings, registry settingsand more.
Event Log Management Netwrix Auditor allows automatic
consolidating, alerting and archivingeven logs data. It collects
Windows event logs and syslog events frommultiple computers across
the network, stores them centrally in acompressed format, and
enables convenient analysis of event log dataand rich reporting
capabilities.
User Session Activity
Monitoring
Netwrix Auditor allows capturing a video of the users activity
on the
monitored computers and writing a detailed activity log, which
helpsanalyze howchanges to your IT infrastructure are made. Netwrix
Auditorallows searching inside video recordings and jumping to a
specifictimestamp to watch how certain actions were performed. It
also providesdetailed user activity reports; moreover, video
records can be integratedinto change reports on different audited
systems.
1.5.Product WorkflowA typical Netwrix Auditor for SQL Server
data collection and reporting workflow is as follows:
1. An administrator configures a Managed Objects and sets the
parameters for automateddata collection and reporting.
2. Netwrix Auditor for SQL Server registers all changes to SQL
Servers configuration anddatabase content, events and users
activity and writes this data to a local file-based
storage, referred to as the Audit Archive.
3. The product emails daily Change Summaries listing all changes
(with their beforeandafter values), events and recorded user
sessions.
4. If the Reports functionality is enabled and configured, data
is imported from the AuditArchive to a dedicated SQL database.
Reports based on audit data can be viewed via
the Netwrix Auditor Console or in a web browser.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
6/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 6 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
2. INSTALLING NETWRIX AUDITOR FOR SQLSERVER2.1.Installation
Prerequisites
Netwrix Auditor for SQL Server can be installed on any computer
in the domain where the
audited SQL Servers are located. For advanced deployment
scenarios, refer toNetwrix Auditor
for SQL Server Administrators Guide.
2.1.1.Hardware RequirementsBefore installing Netwrix Auditor for
SQL Server, make sure that your hardware meets the
following requirements:
Table 2: Netwrix Auditor for SQL Server Hardware
RequirementsHardware Component Minimum Recommended
Processor Intel or AMD 32 bit, 2GHz Intel Core 2 Duo 2x 64 bit,
2GHz
Memory 2GB RAM 8GB RAM
Disk space 250MB physical disk spacefor product
installation.
Additional space isrequired for the AuditArchive and depends
onthe number of AD objectsand changes per day.
Two physical drives with a total of50GB free space
* These are rough estimations. The actual required memory size
depends on the
average number of changes per day in the audited
environment.
2.1.2.Software RequirementsThe table below lists the software
requirements for Netwrix Auditor for SQL Server. Make sure
that this software has been installed before proceeding with the
installation.
Table 3: Netwrix Auditor for SQL Server Software
RequirementsTarget System Required Software
Operating System Windows XP SP3 (both 32-bit and 64-bit
systems)
and above
Additional software .NET Framework3.5 Windows Installer3.1or
above
2.1.3.Supported Environments
This section lists the requirements to the audited
environment:
Table 4: Requirements to the Audited EnvironmentFeature
Supported Environments
SQL Server Auditing
Microsoft SQL Server 2000 Microsoft SQL Server 2005 Microsoft
SQL Server 2008 Microsoft SQL Server 2008 R2 Microsoft SQL Server
2012
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.microsoft.com/downloads/en/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6http://www.microsoft.com/downloads/en/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6http://www.microsoft.com/downloads/en/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6http://www.microsoft.com/en-us/download/details.aspx?id=25http://www.microsoft.com/en-us/download/details.aspx?id=25http://www.microsoft.com/en-us/download/details.aspx?id=25http://www.microsoft.com/en-us/download/details.aspx?id=25http://www.microsoft.com/downloads/en/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6http://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
7/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 7 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Event Log Management
Windows 2000 or above Red Hat Enterprise Linux 5, Ubuntu 11,
Ubuntu
Server 11
Any Linux/Unix system using SyslogWindows Server Auditing
Computers running Windows XP SP 3 and aboveUser Session Activity
Monitoring
2.2.Installing Netwrix Auditor for SQL ServerProcedure 1. To
install Netwrix Auditor for SQL Server
1. DownloadNetwrix Auditor 5.0.2. Unpack the
Netwrix_Auditor_Enterprise_Editionpackage.3. Click the
Installbutton.4. Follow the instructions of the installation
wizard. When prompted, accept the license
agreement and specify the installation folder.
5. On the last step, click Finishto complete the
installation.Netwrix Auditor shortcuts will be added to the
Startmenu and the Netwrix Auditor console
will open.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/requeste.html?product=sqlcrhttp://www.netwrix.com/requeste.html?product=sqlcrhttp://www.netwrix.com/requeste.html?product=sqlcrhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
8/17
Netwrix Auditor for SQL Server Quick-Start Guide
Page 8 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
3. CONFIGURING MANAGED OBJECTTo start auditing your SQL Servers,
you need to configure a Managed Object to define the scope
of the monitored environment.
Procedure 2. To create and configure a Managed Object1. In the
Netwrix Auditor console, select the Managed Objectsnode in the left
pane. TheManaged Objects page will be displayed:
Figure 1: Managed Objects Page
2. Click Create New Managed Object in the right pane.
Alternatively, right-click theManaged Objectsnode and select New
Managed Object from the pop-up menuto start
the New Managed Objectwizard.
3. On the Select Managed Object Typestep, select Computer
Collectionas the ManagedObject type and click Next.
Figure 2: New Managed Object: Select Managed Object Type
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
9/1
Netwrix Auditor for SQL Server Quick-Start Guide
Page 9 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
4. On the Specify Default Data Processing Account step, click
the Specify Accountbutton. In the dialog that opens, enter the
default Data Processing Account credentials
that will be used by Netwrix Auditor for data collection. The
name should be specified
in the following format: domain_name\account_name. For
evaluation purposes, it is
recommended to specify a domain admin account. For details on
the rights and
permissions required for this account, refer to the following KB
article:Data Processing
Account Rights and Permissions.
Figure 3: New Managed Object: Specify Default Data Processing
Account
5. On the Configure Email Settingsstep, specify the email
settings that will be used forChange Summary delivery:
Figure 4: New Managed Object: Configure Email Settings
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/kb/1569http://www.netwrix.com/kb/1569http://www.netwrix.com/kb/1569http://www.netwrix.com/kb/1569http://www.netwrix.com/kb/1569http://www.netwrix.com/kb/1569http://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
10/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 10 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
The following parameters must be specified:
Table 5: Email Settings ParametersParameter Description
SMTP server name Enter your SMTP server name.
Port Enter your SMTP server port number.
Sender address
Enter the address that will appear in the From field inreports
and Change Summaries.
To check the email address, click Verify. The system willsend a
test message to the specified address and willinform you if any
problems are detected.
Use SMTP authenticationSelect this check box if your mail server
requires the SMTPauthentication.
User name Enter a user name for the SMTP authentication.
Password Enter a password for the SMTP authentication.
Confirm password Confirm the password.
Use Secure Sockets Layerencrypted connection (SSL) Select this
check box if your SMTP server requires SSL to beenabled.
Use Implicit SSL connectionmode
Select this check box if the implicit SSL mode is used,which
means that SSL connection is established before anymeaningful data
is sent.
6. On the Specify Computer Collectionstep, enter your Managed
Object name:Figure 5: New Managed Object: Specify Domain Name
7. On the Select Target Systems step, make sure that SQL Servers
is selected underTarget Systems:
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
11/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 11 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Figure 6: New Managed Object: Add Modules
8. On the ConfigureReports Settingsstep, deselect the Enable
Reportsoption:Figure 7: New Managed Object: Reports Settings
Note: The Reports functionality is not covered in this guide, as
it only touches uponthe basic product features. For instructions on
how to configure and view SSRS-based
reports, refer toNetwrix Auditor for SQL Server Administrators
Guide).
9. On the Add Items to Computer Collectionstep, click the
Addbutton to start the NewItem wizard. On the Select Item Typestep,
make sure SQL Server Instance is selected
and click Next:
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
12/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 12 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Figure 8: Computer Collection New Item: Select Item Type
10. On the Specify Itemsstep, select the This SQL Server
instanceoption and specify thename of the server you want to
audit:
Figure 9: Computer Collection New Item: Specify Items
11. On the next step, review your new item settings and click
Finish. The specified SQLServer instance will be added to the
audited computer collection.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
13/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 13 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
12. On the Configure SQL Server Change Reporter Settingsstep,
click the Addbuttonunder SQL Server Configuration Audit Change
Summary recipients and specify your
email address:
Figure 10: New Managed Object: Configure SQL Server Change
Reporter Settings
It is recommended to click the Verifybutton. The system will
send a test message to
the specified email address and will inform you if any problems
are detected.
13. On the last step, review your Managed Object settings and
click Finish. A confirmationmessage will be displayed.
The newly created Managed Object will appear under the Managed
Objects node, and
its details will be displayed in the right pane:
Figure 11: The Managed Object Page
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
14/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 14 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
4. RUNNING THE INITIAL DATA COLLECTIONWhen you have added and
configured a Managed Object, Netwrix Auditor for SQL Server
starts
collecting data on SQL Server changes and writes it to the Audit
Archive, a local file-based
storage. When the first data collection is performed, the
initial snapshot of the monitored
servers current state is created. Netwrix Auditor uses this
information as a benchmark to
generate change reports.
After you have configured a Managed Object, launch data
collection manually to avoid waiting
for a scheduled run.
Procedure 3. To launch a data collection task1. In the Netwrix
Auditor console, expand the Managed Objectsnode, and select
your
Managed Object.
2. In the right pane, click Run.Note: Depending on the size of
your monitored AD environment, creation of an
initial snapshot may take quite long.
After the initial data collection task has completed, an email
notification is sent to the specified
recipient(s) like in the example below:
Figure 12: Initial Analysis Notification
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
15/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 15 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
5. MONITORING SQLSERVER FOR CHANGES5.1.Making Test Changes
Now that the product has collected a snapshot of the audited SQL
Servers current
configuration, you can make test changes to see how they are
reported.
Note: Before making any test changes to your SQL
Serversconfiguration, ensurethat you have the domain administrators
rights, and that the changes conform to
your security policy.
5.2.Receiving a Change SummaryAfter you have made test changes
to the audited SQL Serversconfiguration, you can see how
these changes are reported.
By default, Netwrix Auditor emails a Change Summary to the
specified recipient(s) daily at 3:00
AM. The Change Summary lists all changes that occurred in the
last 24 hours and provides the
WHAT, WHO, WHERE and WHERE details for every change.
To avoid waiting for a scheduled Change Summary delivery, you
can generate it manually. To
do this, launch a data collection task manually as described in
Procedure 3 To launch a data
collection task.After the task has completed, a Change Summary
will be generated and sent
to the specified email address:
Figure 13: Change Summary Example
The Change Summary provides the following information for each
change:
Table 6: Change Summary FieldsParameter Description
Change TypeShows the type of action that was performed on the
SQLServer resource. The values are:
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
16/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 16 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
Added Removed Modified
Resource TypeShows the type of the SQL Server resource that
wasmodified, e.g. Server Role.
When Changed Shows the exact time when the change occurred.
Who Changed Shows the name of the account under which the
changewas made.
Workstation The name of the computer where the change was
made.
Server The name of the modified SQL Server instance.
Resource Name The name of the resource that was modified.
Details Shows the before and after values for the modified
object.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedback
-
5/23/2018 Netwrix Auditor for SQL Server Quick Start Guide
17/
Netwrix Auditor for SQL Server Quick-Start Guide
Page 17 of 17
Copyright 2014 Netwrix Corporation. All Rights Reserved
Suggestions or comments about this
document?www.netwrix.com/feedback
A APPENDIX:RELATED DOCUMENTATIONThe table below lists of
documentation published to support Netwrix Auditor for SQL
Server:
Table 7: Product DocumentationDocument Name Overview
Netwrix SQL Server Change ReporterAdministrators Guide Provides
detailed instructions on how to configureand use the SQL Server
Auditing feature of NetwrixAuditor.
Netwrix Auditor for SQL ServerTroubleshooting Guide
Contains a list of issues that users may encounterwith SQL
Server auditing, and providesexplanations and instructions on how
to fix them.
Installing Microsoft SQL Server andConfiguring the Reporting
Services
This technical article provides instructions on howto install
Microsoft SQL Server 2005/2008/2008 R2Express and configure the
Reporting Services.
Netwrix Windows Server Change ReporterInstallation and
Configuration Guide.
Provides detailed instructions on how to set up theWindows
Server Auditing feature of NetwrixAuditor.
Netwrix Windows Server Change ReporterAdministrators Guide
Provides detailed instructions on how to use theWindows Server
Auditing feature of NetwrixAuditor.
Netwrix Event Log Manager Installation andConfiguration
Guide
Provides detailed instructions on how to set up theEvent Log
Management feature of Netwrix Auditor.
Netwrix Event Log Manager AdministratorsGuide
Provides detailed instructions on how to use theEvent Log
Management feature of Netwrix Auditor.
Netwrix User Activity Video ReporterInstallation and
Configuration Guide
Provides detailed instructions on how to set up theUser Session
Activity Monitoring feature of NetwrixAuditor.
Netwrix User Activity Video ReporterAdministrators Guide
Provides detailed instructions on how to use theUser Session
Activity Monitoring feature of NetwrixAuditor.
http://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/feedbackhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Troubleshooting_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Troubleshooting_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Troubleshooting_Guide.pdfhttp://www.netwrix.com/download/documents/Configuring_Microsoft_SQL_Server_Reporting_Services_Technical_Article.pdfhttp://www.netwrix.com/download/documents/Configuring_Microsoft_SQL_Server_Reporting_Services_Technical_Article.pdfhttp://www.netwrix.com/download/documents/Configuring_Microsoft_SQL_Server_Reporting_Services_Technical_Article.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Installation_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Installation_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Installation_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Installation_and_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Installation_and_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Installation_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Installation_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Installation_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Installation_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_User_Activity_Video_Reporter_Installation_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Installation_and_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Event_Log_Manager_Installation_and_Configuration_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Installation_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_Windows_Server_Change_Reporter_Installation_Guide.pdfhttp://www.netwrix.com/download/documents/Configuring_Microsoft_SQL_Server_Reporting_Services_Technical_Article.pdfhttp://www.netwrix.com/download/documents/Configuring_Microsoft_SQL_Server_Reporting_Services_Technical_Article.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Troubleshooting_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Troubleshooting_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/download/documents/NetWrix_SQL_Server_Change_Reporter_Administrator_Guide.pdfhttp://www.netwrix.com/feedback