network-electronics.com • vpginc.com Product Catalog 2008–2009 F I B E R , I P , S O N E T / S D H , R O U T I N G & S I G N A L P R O C E S S I N G
Mar 10, 2016
network-electronics.com • vpginc.com
Product Catalog2008–2009
Fiber, iP, SONeT/SDH, rOuTiN
g & S
igN
al P
rOc
eSSi
Ng
ISO 9001Network electronics is iSO 9001:2000 certified.
The iSO 9001:2000 certification of Network electronics’s
systems and internal routines is a proof of our commitment
to steadfast quality improvement throughout the
organisation.
in today’s demanding business environment, this is an
important certification both for the manufacturer and even
more important for demanding customers who do not want
to spend time auditing suppliers.
as part of the iSO 9001:2000 certification, an independent
accredited board will carry out annual audits of the
company’s systems and routines.
NEBS LEvEL 3Many products from Network / VPg have been tested to
verify their compliance with the requirements of NebS (or
“Network equipment building System”) level 3. Products
that meet these stringent environmental safety and
electromagnetic compatibility standards are qualified for
use in telecom central office environments in the united
States, and customers around the world recognize the
level of reliability indicated by a NebS level 3 certification.
The specifications for NebS are managed by Telcordia
Technologies
(www.telcordia.com).
ROHSroHS – the restriction of the use
of certain Hazardous Substances in
electrical and electronic equipment is
an eu directive banning electrical and
electronic equipment containing more
than agreed level of certain hazardous substances from 1
July 2006.
it is very important that manufacturers show commitment to
the outside environment, and many customers, even outside
europe, ask for roHS compliance at tender stage.
both Network electronics’ product lines VikinX and Flashlink
are compliant with the requirements of Directive 2002/95/
ec on the restriction of the use of certain Hazardous
Substances (roHS).
WEEEOne of the challenges in the world is the
growing amounts of electronic equipment
(ee) waste that is not sorted and treated
properly. Network electronics has
implemented return facilities for all products that we bring
to market.
Network electronics is fully compliant with the requirements
of Directive 2002/96/ec on the Waste electrical and
electronic equipment (Weee).
Nemko
Certification NORWEGIANACCREDITATION
QUAL 001
Certificate no. 900752
ISO 9001 Certified
3network-electronics.com |
Chapter 1 VPg intro page 8
1.1 vENtuRa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Ventura chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 element Management . . . . . . . . . . . . . . . . . . . . . . . . 13 Monitoring and Test System . . . . . . . . . . . . . . . . . . 16 Time Division Multiplexing . . . . . . . . . . . . . . . . . . . 18 SONeT/SDH Network interfaces . . . . . . . . . . . . . . . 25 Wavelength Division Multiplexing . . . . . . . . . . . . . 26 converters and embedders/De-embedders . . . . . 30 Single channel Fiber . . . . . . . . . . . . . . . . . . . . . . . . . 44 High Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 iP Network interfaces . . . . . . . . . . . . . . . . . . . . . . . . 64 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Speciality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SFP Selection index . . . . . . . . . . . . . . . . . . . . . . . . . . 76
1.2 PLuS SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Monitoring and Test System . . . . . . . . . . . . . . . . . . 78 TV-1 Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TV-c Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Chapter 2 Network intro page 102
2.1 FLaSHLINk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Flashlink Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 N-bOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 MOT-bOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Flashlink Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 System controller (gYDa-Sc) . . . . . . . . . . . . . . . . . 110 Modular Distribution amplifiers . . . . . . . . . . . . . . . 112 embedders/De-embedders . . . . . . . . . . . . . . . . . . . 116 HD to SD Downconverter with Framesync and arc . . . . . . . . . . . . . . . . . . . . . 129 Video conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 audio conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Synchronisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 automatic changeover Modules . . . . . . . . . . . . . . 136 eO and Oe converters . . . . . . . . . . . . . . . . . . . . . . . 137 Time Division Multiplexers . . . . . . . . . . . . . . . . . . . . 146 rF over fiber Modules . . . . . . . . . . . . . . . . . . . . . . . . 147 Datacom interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 148 rS-422 and gPi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 automatic Protection Switching and Optical Distribution . . . . . . . . . . . . . . . . . . . . . . 150 2 ch. WDM – Optical Multiplexing . . . . . . . . . . . . 151 Optical Multiplexing . . . . . . . . . . . . . . . . . . . . . . . . . 152 Optical Multiplexing / cWDM . . . . . . . . . . . . . . . . 154 Optical Multiplexing / DWDM . . . . . . . . . . . . . . . . 155 eDFa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 iP gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Flashlink Micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Distribution amplifiers . . . . . . . . . . . . . . . . . . . . . . . . 163 embedders/De-embedders . . . . . . . . . . . . . . . . . . . 164 Video conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 audio conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Synchronisation Modules . . . . . . . . . . . . . . . . . . . . . 165 automatic changeover Modules . . . . . . . . . . . . . . 165 eO and Oe converters . . . . . . . . . . . . . . . . . . . . . . . 166 Datacom interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Flashlink Micro accessories . . . . . . . . . . . . . . . . . . . . 167 1ru compact Distribution amplifiers . . . . . . . . . . . . . . . . . 168
Flashlink accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
1.3 BRavONEt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 bravoNet chassis and Power Supply . . . . . . . . . . . 84 element Management . . . . . . . . . . . . . . . . . . . . . . . . 86 Monitoring and Test System . . . . . . . . . . . . . . . . . . 88 aSi Multiplexer/Network adapter . . . . . . . . . . . . . . 90 aSi/SDi 270 Multiplexer/Network adapter . . . . . . 96 aSi/SDi Protection Switching . . . . . . . . . . . . . . . . . . 100
2.2 vIkINX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 VikinX Sublime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 3g-HD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . 177 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 rS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 VikinX Sublime accessories . . . . . . . . . . . . . . . . . . . 180 VikinX Modular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Modular Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 SD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184/186 HD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185/187 analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Telecom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 VikinX configuration, control and Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Direct and remote control . . . . . . . . . . . . . . . . . . . . 191 control and Monitoring . . . . . . . . . . . . . . . . . . . . . . 192 ethernet connections . . . . . . . . . . . . . . . . . . . . . . . . 193 control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 VikinX Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 VikinX compact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 component analog Video . . . . . . . . . . . . . . . . . . . . 206 SD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Telecom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 rS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
VikinX accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Power Supply Frames . . . . . . . . . . . . . . . . . . . . . . . . 214 Desktop Power Supply . . . . . . . . . . . . . . . . . . . . . . . 215
2.3 NEtCaRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
contents
The global Video Transport leader
Network electronics designs, manufactures and
markets a portfolio of video transport solutions
of unrivalled breadth and depth.
The acquisition of Video Products group, inc.
(VPg) of Oxnard, california in January of 2008
has further enhanced the company’s global
presence and reputation for providing industry
leading solutions to the video, broadcast and
telecommunications markets.
Network electronics’ competitive solutions
are highly functional and deployment-proven,
creating future-proof transport architectures
that fully meet campus, short-haul, metro and
long-distance.
For contact information:
www.network-electronics.com
6 | network-electronics.com
The global Video Transport leader
ventura• SONET/SDHandIPnetworkinterfacesand
multiplexers
• JPEG2000andMPEG-2encodersanddecoders
• Opticalmultiplexing;CWDMandDWDM
• Multi-formatmetropolitantransport
• Carrierclassspecificationsandfeatures(NEBS)
Flashlink• Fiberoptics
• Opticalmultiplexing;CWDMandDWDM
• Timedivisionmultiplexing
• Signalprocessinganddistribution
• Highlycost-efficient
• Verycompactandlow-power
vikinX – routing range• VikinXSublime
– ethernet control
– 3gbps single link support for 1080p HDTV
– ultra low power consumption
– Sizes from 8x8 to 64x64
• VikinXModular
– HD-SDi, SD-SDi, analog audio, aeS/ebu
– configuration up to 256x256 with
increments of 32x32
network-electronics.com | 7
Ventura
vERSatILE SOLutIONSThe Ventura™ line of modular signal transport solutions
is designed with carrier-class specifications and features in
mind. Whether it is dark fiber transport, telco interfacing to
SONeT/SDH or iP with or without signal multiplexing, the
Ventura platform fulfils today’s and future signal transport
needs. The NebS-compliant Ventura platform can transport
analog or digital video with associated audio as well as
data in a variety of formats, thus providing probably the
most versatile products for high quality content delivery.
JPeg 2000 and MPeg2 compression schemes enable video
transport over a wide range of network interfaces and bit
rates.
FLEXIBLE NEtWORkSVentura products provide conversion and transport
solutions for non-compressed analog and digital optical
signals, mostly in the metro area network environment.
The extensive selection of Ventura cards and space-
efficient Ventura chassis enable customers to create flexible
networks—networks that support a wide variety of formats,
recover nimbly from signal interruptions and provide a long-
lasting return on investment.
adaPtaBLE CaPaBILItIESThe Ventura line supports all video formats, as well as
ethernet, rS422, DS3 and 155Mbps signals. The VS103 3ru,
10-slot chassis and the VS101 1ru, 3-slot chassis can each
run on ac or Dc power, are compatible with all Ventura
cards, and meet the stringent requirements of NebS level
3 compliance. Ventura cards are hot-swappable, and in
many instances are field-configurable, using SFP modules
to support cWDM, DWDM and 1310/1550 transport.
Ventura equipment protects signal integrity with integrated
HD jitter attenuation, sub-millisecond recovery from
signal interruptions and a self-configuring browser-based
management system.
Network / VPg is extending the Ventura line with the
introduction of new modules developed to facilitate the
compression, transmission and economical transport of HD
signals. The new modules, including a JPeg 2000 encoder
and decoder, an 8-channel SONeT/SDH multiplexer and
de-multiplexer, and a universal analog digital video/audio
adapter for fiber optic transport, provide Ventura customers
with greater ability to meet the challenges of transporting
high definition signals and managing diverse legacy and
emerging signal formats. The compression and long
distance interfaces extend the reach of the Ventura line, and
the universal conversion capability enables customers to
adapt to evolving regulatory requirements in metropolitan
networking.
kEy FEatuRES• Metropolitanareaandlongdistancenetworking
• SONET/SDHandIPnetworkinterfacesandmultiplexers
• JPEG2000andMPEG-2encodersanddecoders
• Opticalmultiplexing;CWDMandDWDM
• Carrier-classspecificationsandfeatures(NEBS)
network-electronics.com | 9
braVOnet
PluS Series
ROBuSt BaNdWIdtH OPERatIONSbraVOnet is Network / VPg’s high port-density, carrier-class
transport product suite that provides telco operators and
broadcasters with a solution for transporting multiple DVb-
aSi signals and different video formats over SONeT/SDH
and PDH telco networks with an unmatched bandwidth
utilization.
OPtImIzEd REaL-tImE PERFORmaNCEbraVOnet boasts the highest aSi payload in the industry,
with up to 16 aSi streams on DS3 and Oc-3 networks. like
the Ventura line, braVOnet provides carrier-class, NebS
level 3 compliant, transport, but braVOnet specializes in
optimizing the structured formats and multiplexing for
long distance. customers select braVOnet for bandwidth
efficiency, such as its ability to carry two aTSc-HD channels
on a single DS3 line, or for slipless aSi switching—
technology that transforms a signal-break event from a 7 –
10 second viewer annoyance and advertiser nightmare into
an imperceptible switch to the alternate signal source.
FEatuRES• ASIbandwidthoptimization
• MaximizesASIpayloadcapacity
• Simultaneoustransportofmultiplecompressedand
uncompressed digital video signals
• Manages,controlsandprotectseachtransportstream
individually
• Duel-channelintelligentsliplessswitching
• Fulltransportstreamprotectionfordigitaltelevision
networks
POINt-tO-POINt FIBER OPtIC tRaNSPORt SOLutIONS TV-c PluS encoders and decoders perform high quality
MPeg2 compression of SDi or composite video as well as
analog or digital audio. TV-c PluS comes with a variety
of interfaces for SDH/PDH, iP and DVb-aSi networks. The
intuitive graphical user interface of the TV-c PluS software
shortens setup time and eases operation.
FOCuS ELEmENt maNagEmENt SImPLIFIEd dEPLOymENtThe Focus product line supports sophisticated signal
integrity analysis and trouble-shooting of transport
equipment––whether the equipment is from Network /
VPg or another vendor. Focus products combine attractive
value and space efficiency with the convenience of a Web-
based interface. in addition to monitoring and providing
automated alerts for DVb-aSi, SDi, SDTi and associated
audio signals, these element management products provide
tools to simplify deployment of a standard template of
chassis and cards to multiple remote locations.
COSt EFFICIENtNetwork / VPg’s element testing and management solutions
offer high visibility and powerful troubleshooting tools at an
extremely low cost per channel. every level of eTr 101 – 290
reporting for up to sixteen channels can be made available
from a 1ru monitoring system. Network / VPg network
management products are designed to achieve a maximal
result with a minimal cost of ownership.
9
10 | network-electronics.com
aC POWER SuPPLy (INtERNaL) CHaSSISVoltage 90-250Vac, 90-264Vac
Power 60W
Frequency 47-63Hz
current 1.1a max
efficiency 82% typicalWeight 10.0 lbs. (4.5 kg)
ELEmENt maNagEmENtOptional advanced element management features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS101 chassis. The element management card is installed over the power supply so that it does not occupy or interfere with card slots. an rJ45 connector is located on the rear of the chassis for access to the network system. an rJ11 jack is also provided for connecting an rJ11-to-Db9 converter cable for serial access.
PHySICaL aNd ENvIRONmENtaL# of card Slots 3
rack Space 1ru x 19” rack
Dimensions 1.75” x 19” x 14”
cooling Field serviceable fans
grounding Nut use 18 aWg or thicker
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambientrelative Humidity 5% to 85%
REduNdaNt aC POWER SuPPLy (EXtERNaL)Voltage 90-264Vac
Power 50W
Frequency 47–63Hz
current 1.35a max
efficiency 75% typicalWeight 1.2 lbs. (0.54 kg)
dC POWER CHaSSISVoltage 35-72 VDc
Power 50W
efficiency 81% typicalWeight 10.0 lbs. (4.5 kg)
REduNdaNt dC POWER SuPPLy (EXtERNaL)Voltage 35-72 VDc
Power 50W
efficiency 81% typicalWeight 2.0 lbs. (0.9 kg)
ORdERINg OPtIONSVS101-3-ac 1ru ac Ventura chassis with 3 card slots
VS101-3-PSac internal power supply
VS101-3-rPSac redundant ac power supply (load sharing board included)
VS101-3-Dc 1ru Dc Ventura chassis with 3 card slots
VS101-3-PSDc internal Dc power supply
VS101-3-rPSDc redundant Dc power supply (load sharing board included)
VS101-3-eMS built-in comprehensive element management
VS101-3-aeMS built-in advanced element management
1Ru Chassis for the ventura Series
vS101-aC / vS101-dC
chassis
VeNTura
1.1
• BothACandDCversionsavailable• 3slotsforanycombinationofcardsfromtheVenturaseries• Single,field-replacablepowersupplyincluded• Asecond,external,field-installablepowersupplyoptionisavailablefor
ac or Dc which includes a dual redundant load-sharing board•Hotswappablecardsinanyslot• Fieldserviceablefans• TransparentfrontpaneltoviewcardLEDs• Slidingfrontpanelforcardaccess• 19”rackmountablewithremovableflangeforcenterorwallmounting•OptionalAdvancedElementManagementSystemthatprovidesremote
status, alarms and configurations via SNMP and ethernet, without occupying a card slot
•NEBSLevel3-compliantDCversionforcentralofficeapplications
network-electronics.com | 11
ELEmENt maNagEmENtFcS183-aeMS features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis.
PHySICaL aNd ENvIRONmENtaL# of card Slots 10
rack Space 4ru x 19” rack
Dimensions 5.25” x 19” x 14”
Weight ac chassis: 11.22 lbs. Dc chassis: 10.93 lbs.
Power input connectors ac–iec320 Dc–3 way terminal screw
Fuse ac–4a/250V Dc–5a anti-surge
cooling 3 field-replaceable fans per tray located underneath each PSu and top front exhausting fan tray, alarmed, redundant and field-replaceable
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
SummaRy LEd INdICatORSSyStem LeDSThree sets of summary alarm leDs are visible on the front of the VS103 when the door is closed. leD set includes power supply status, board monitors and fan monitors.
BackpLane power LeDSDc Power greenMajor redMinor Yellow
BoarD monitorS LeDSMajor redMinor Yellow
Fan monitorS LeDSMajor redMinor Yellow
aLaRm aNd mONItORINg CONNECtORa 37-way D-Type connector provides direct access to the major and minor alarm lines and serial bus for each card in the chassis.
ORdERINg OPtIONSVS103-ac-iFa 4ru ac Ventura chassis
VS103-Dc-iFa 4ru Dc Ventura chassis
VS113 ac power supply
VS123 Dc power supply
VS111 1ru heat baffle
VS112 1ru heat baffle with fans
FcS183-aeMS advanced element Management SystemFcS183-eMS element management system
ac power SuppLieSVoltage 90–264Vac
Power 200W
Frequency 47–63Hz
efficiency 70% at full loadWeight 1.67 lbs.
LEd INdICatORSPower leDs
ac Power green
Major alarm redMinor alarm Yellow
ORdERINg OPtIONSVS103-ac-iFa 4ru ac Ventura chassisVS113 ac power supply
Dc power SuppLieSVoltage 35-72 VDc
Power 200W
efficiency 70% at full loadWeight 1.70 lbs.
LEd INdICatORSPower Monitors
Dc Power green
Major alarm redMinor alarm Yellow
ORdERINg OPtIONSVS103-Dc-iFa 4ru Dc Ventura chassis
VS123 Dc power supply
chassis and Power Supplies 1.1
VeNTura
vS103 4Ru Chassis and vS113-a/C and vS123-d/C Power Supplies
vS103 / vS113 / vS123
• Robustcarrier-classdesign• 10slotsforanycombinationofcardsfromtheVenturaseries•Dualredundantloadsharingpowersupplies,availableinACorDC,ensure
maximum system up time•Hotswappablecardsandpowersupplies• Fieldserviceablefansensuresystemlongevity• FrontpanelsummaryLEDsofpowersupplystatus,boardmonitorsandfan
monitors •Drop-downdoorforcardaccess• Passivechassisbackplane• 19”rackmountable•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
12 | network-electronics.com
VeNTura
1.1
network-electronics.com | 13
EtHERNEtconnector rJ45
link Speed 10Mbps (10baseT)
iP Settings iP address Subnet Mask gateway
Password levels administrator user
Operating Systems Windows 98 Windows 2000 Professional Windows XP Professional linux
Web browsers internet explorer 6.0 Netscape 7.2
SNmPStandard Mib ii
Mib Parameters sysDesc sysObject sysupTime syscontact sysName syslocation sysServices
# of Trap Destinations 5
Trap information Trap number Trap attachment
Trap configuration through Web browser interface
RS232connector Db9 (female)baud rate 9600, 1 stop bit, 8 data bits, no parity
LEd INdICatORSFcS183-aeMS activity
link Dc power
ELEmENt maNagEmENtFeatures SNMP and Web browser interface that provides monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis.
Sample alarms loss of input loss of video eDH errors loss of audio laser failure Optical low light upstream transmitter alarms
Sample Status control settings SFP transmitter wavelength SFP transmitter output power Model and serial number
Sample controls laser transmitter (enable or disable) control set by (netman or onboard switches) receiver input mode (optical or electrical) SDi default signal (ON or OFF) Mux channel (enable or disable) Test pattern generator (enable or disable) line standard (NTSc or Pal)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V
Power consumption 2W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSFcS183 Focus comprehensive element management
card
element Management 1.1
VeNTura
Web browser with SNmP Element management System
FCS183
•WebbrowserandSNMPuserinterfaces• Automaticcardrecognition•Userdefinablealarms(major,minorornoalarm)• Statusandconfigurationofcardsettings• Provideshistorywithdate/timestampingforeachcard• Twolevelsofuserandpasswordaccessprivileges• Fanandpowersupplyalarmstatus• Inbandelementmanagement• FirmwareremotelydownloadableoverInternet/Intranet• Providesinterfacetothirdpartyelementmanagementsystemsthrough
standard SNMP Mibs • Accessupto32chassisthroughasingleIPaddressorviaoneRS232port•NEBSLevel3compliant
VS183
SLOT
#2
SLOT
#3
SLOT
#4
SLOT
#5
SLOT
#6
SLOT
#7
SLOT
#8
SLOT
#9
SLOT
#10
VS103 Ventura chassis
Network
14 | network-electronics.com
advanced Element management System
FCS183-aEmS
advanced element Management
VeNTura
1.1
The FcS183-aeMS is a linux-based element management card managing the Ventura series cards. it acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FcS183-aeMS can be configured to control other cards using a remote and secure Telnet session.
The FcS183-aeMS is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. it uses residual power to save the data and shuts down in a controlled manner.
• Automaticrecognition,controlandoperationoflinecards•WebbrowserandSNMPbasedmonitoringandcontrolling• RemotefirmwaredownloadforFCS183-AEMSandotherlinecardsusing
remote and secure Telnet session•Date/timestampedhistoryanddatarecordinginFlashmemory(buffer)• Chassisenvironmentreportingusingtemperatureandfanspeedsensor(LED
indicators)•On-boardmicroprocessordetails:100MIPS,32-bitRISCbasedSoC,External
128Mb flash and 64Mb SDraM• Safeoperationtransfertoupdatedfirmware(startsusingnewfirmwareafter
validation)• Linux-basedsystem•Userdefinablealarmsbasedonpriority(major,minorornoalarm)
SNMP agent #1
SNMP agent #N
Web server #X
BRAVOnet
AEMS
SNMPagent
Network
SNMP manager #1
SNMP manager #N
Inform
Web manager #X
Web browserWeb browser
Get, Set
Inform
Get, Set
VS183AEMS
POWER
#1
POWER
#2
FAN
SLOT
#2
SLOT
#3
SLOT
#4
SLOT
#5
SLOT
#6
SLOT
#7
SLOT
#8
SLOT
#9
SLOT
#10
VS103 Ventura chassis
network-electronics.com | 15
FCS183-aEmS aS SNmP agENt a single FcS183-aeMS acts as the proxy agent for up to 9 Ventura line cards, 2 power supplies and the fan assembly placed in the VS103 chassis.
ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis. Some of the features are given below: – SNMPV2c ready – Telnet based remote and secure login – remote firmware downloads
LEd INdICatORSDc Dc power supply status
ecg Device status
liNK ethernet link status
acT ethernet activity status
carD VS-183 aeMS alarm status
SHelF line cards alarm statusPrOg can be user configured
PHySICaL aNd ENvIRONmENtaLFcS183-aeMS – aeMS card resides in a single slot of a VS103 Ventura series chassis.
Voltage 5V or 3.3V chassis supply
Power consumption 2W max
Operating Temp 0 °c/32°F to 50 °c/122°F
Storage Temp -40 °c/-40°F to 85 °c/185°F
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce, Fcc (Part 15,
class a), c-TicK, and roHS.
CONNECtOR tyPESethernetTelnet remote linux system configuration
FTP Firmware downloads
HTTP Web browser access
SNMP element management
connector rJ45 10/100 Mbps
No. of connectors Single access dual interface (front and rear access: Two ports are provided for a common access)
Password levels administrator/user
Operating Systems Windows 98, 2000 Pro, XP Pro and linuxWeb browser internet explorer 6.0
Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported)
rS232 / eia232For linux system configuration
connector Db9 (male)
No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits, no
parityGpioTo interface Ventura chassis with user’s equipment
connector Micro-D 9-pinNo. of connectors 1, with 8 user configured,
TTl compatible i/O lines
ORdERINg OPtIONSFcS183-aeMS advanced element Management System
card
gPiO cable FcS183-aeMS general purpose input/output card connector cable
advanced element Management 1.1
VeNTura
advanced Element management System
FCS183-aEmS
RJ-45
IDC-50PC Lines
andAlarms
RS232 (x2)
Backplane
Connectorpanel
EthernetTransformer
PC and AlarmProcessing
Linux basedsingle boardcomputer
32-bit SoC100MIPS
Serial Ports
128Mb Flash
64Mb SDRAM
Power Conversion
DIPSwitch
FrontPanelLEDsand
RJ-45
ProgrammableGeneral Purpose I/O
FCS183-AEMS
GPIO (8 I/Os)
16 | network-electronics.com
dvB-aSI/SdI monitoring and test System
FCS1000
Monitoring and Test System
VeNTura
1.1
FcS1000 provides a high-density, cost-effective QoS monitoring solution.
each input has a 270Mbps interface, allowing monitoring of either DVb-aSi signals or serial digital video signals. Service management is provided via an embedded Pc-based processor which provides a full Simple Network Management Protocol (SNMP) interface and Web browser display. all alarm conditions can be mapped into SNMP traps as well as individual gPi outputs for local alarms.
• In-servicemonitoringforupto16channelsin1RU•DVB-ASIorSMPTE259SDIcapable•CheckingofallDVBinputstreamstoETR101290•CheckingtoSMPTERP165onSDIinputstreams•High-impedancepassive‘BNCTee’foreachchannel• ComprehensiveSNMPtrapsandinforms• SeparateGPIcontactalarmsforeachchannel• Fullinternaldiagnostics• ASIstreamhandlingfrom16Kbps–216Mbps• 10/100baseTEthernetmanagementport• SerialportcommunicationsforlocaldiagnosticsandISDN/PSTNadapters• Powerfulalarmfilteringandlogging•QoSprofilepresetsandweeklyscheduling• Remoteuploadsofnewschedulesandfirmwareupgrades
network-electronics.com | 17
OPERatIONbrowser based, multi-channel, menu-driven QoS monitoring system. configurable for SDi or aSi in groups of four. a set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTe rP165 or eTr 101290.
up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.
an alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. individual channel SNMP informs are generated and sent based on the settings of this screen.
dvB-aSI mONItORINg SmPtE 259m SdI mONItORINgeTr 101 290 SMPTe rP165
Signal present Signal present
TS sync loss eDH–Missing
TS sync byte errors eDH–Packet error
PaT error active Picture (aP) eDH error here
continuity count error aP error detected already
PMT error aP unknown error status
PiD error Full Field (FF) error detected here
Pcr error / accuracy FF error detected already
caT error FF unknown error status
NiT error ancillary (aNc) error detected here
SDT error aNc error detected already
eiT error aNc unknown error status
rST error Other alarms
TDT error Video black
rS Fec error Freeze framecontinuity count audio (group error, silence, phase and
overload)
POWER aNd ENvIRONmENtaLPower automatic 110~240 V ac, iec connector
Power consumption 0.15a , 240Vac, <35W
cooling Forced via side intake and exhaust vents
Operating Temperature between 0 °c and 50 °cOperating Humidity 10% to 90% (non-condensing)
ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls. Some of the features are:- SNMP V2c ready- Telnet based remote and secure login- remote firmware downloads
CONNECtOR tyPESethernetTelnet remote linux system configuration
FTP Firmware downloads
HTTP Web browser access
SNMP element management
connector rJ45 10Mbps
No. of connectors Single access (16 channels)
Password levels administrator/user
Operating Systems Windows 98, 2000 Pro, XP Pro and linuxWeb browser internet explorer 6.0
Netscape Navigator 7.2rS232 / eia232For linux system configuration (two connectors, front and rear access)
connector Db9 (male)
No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits, no
parityGpioTo interface Ventura chassis with user’s equipment
connector DSub-25 pinNo. of connectors 1, with 16 TTl compatible i/O lines
PHySICaLWidth Front panel: 19” eia standard
(483mm) (exc. rack ears: 440m)
Height 1.7” (43mm), 1ru
Depth 19” (484mm) (including rear connectors)Weight 11lbs. (5kg) (6kg with delivery packing)
ORdERINg OPtIONSFcS1000 Focus Monitoring and Test System
(formerly named TiMS)
Monitoring and Test System 1.1
VeNTura
dvB-aSI/SdI monitoring and test System
FCS1000
18 | network-electronics.com
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 4 (VS411-eO)
# of outputs 4 (VS411-Oe)
Monitors 1 (VS411-eO and VS411-Oe)
connector bNc
impedance 75 Ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of outputs 1
connector Sc/Pc
Data rate 1.3gbps
laser type SFP
laser wavelengths 1310nm, 1550nm, cWDM, DWDM
Output power level –1dbm minFiber type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver type aPD pigtail
input wavelengths 1260nm – 1620nm
Sensitivity ≤–32dbm
Max input power –8dbmFiber type Single mode
RS422# of channels 1
connector 3 pin polarized headerData rate up to 1Mbps
LEd INdICatORSVS411-eo VS411-oechannel 1 loss of video channel 1 loss of videochannel 2 loss of video channel 2 loss of videochannel 3 loss of video channel 3 loss of videochannel 4 loss of video channel 4 loss of videolaser failure loss of input
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms channel 1 loss of video channel 2 loss of video channel 3 loss of video channel 4 loss of video laser transmitter failure (VS411-eO) loss of input (VS411-Oe)
Status Model and serial number Transmitter power level (VS411-eO) SFP laser transmitter wavelength (VS411-eO) SFP receiver installed (VS411-Oe) receiver power level (VS411-Oe) laser power Optical receiver power
controls laser transmitter enable/disable (VS411-eO) Pattern generator enable
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V, +12V, -12V
Power consumption 9W max
Operating temperature 0 ˚c to 50 ˚c chassis ambient
Storage temperature –40 ˚c to 85 ˚c ambient
relative humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS411-eO-SFP Transmitter w/SFP cage, no optics installed
VS411-Oe aPD receiver installed
SFp optionSSFP-T3-1310-S 1310nm laser
SFP-T3-1550-S 1550nm laser
SFP-T3-1470-c 1470nm cWDM laser
SFP-T3-1490-c 1490nm cWDM laser
SFP-T3-1510-c 1510nm cWDM laser
SFP-T3-1530-c 1530nm cWDM laser
SFP-T3-1550-c 1550nm cWDM laser
SFP-T3-1570-c 1570nm cWDM laser
SFP-T3-1590-c 1590nm cWDM laser
SFP-T3-1610-c 1610nm cWDM laser
4-Channel SdI/aSI multiplexer/demultiplexer
vS411
Time Division Multiplexing
VeNTura
1.1
•Multichanneldigitaldataonasinglefiber•Designedtotransport270MbpssignalscomplyingwithSMPTE-259M,
305M and DVb-aSi eN-50083-9• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemux
output• Lossofvideo,lossofopticalinput,laserfailureLEDs• Automaticcableequalizationupto300mforBelden8281• Selectabletestpatterngeneratorforeachchannel• Enable/disablecontrolforeachchannel• EDHQoSmonitoringoneachchannelforSDI• AuxiliaryRS422channel• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany
iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElement
Management System that provides remote status, alarms and configurations via SNMP and ethernet
VS411-EO
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
1310/1550/CWDM1.302Gbps
1310/1550/CWDM
CH1
CH2
CH3
CH4
RS422
Front panel monitor
VS411-OE
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
APD Rcv’r
APD Rcv’r
CH1
CH2
CH3
CH4
RS422
Front panel monitor
270MbpsNetwork
network-electronics.com | 19
dIgItaL vIdEOStandards 1.3025gbps
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
Data rate 1.3025gbps
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level –1dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type aPD SFP
input Wavelengths 1260nm–1620nm
Sensitivity ≤–32dbm
Max input Power –8dbmFiber Type Single mode
LEd INdICatORSlaser failure loss of input
ELEmENt maNagEmENtcompatible with the FcS183 and FcS183-aeMS that feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms laser transmitter failure loss of input
Status Model and serial number SFP laser installed laser enable laser wavelength (nm) laser power (dbm) SFP receiver installed Optical receiver power (dbm)
controls laser transmitter enable/disable
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Power consumption +3.3V, +5V, 5W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS411-OO Optical regenerator with SFP-r3-aPD receiver
installedSFp optionSSFP-T3-1310-S 1310nm laser
SFP-T3-1550-S 1550nm cWDM laser
SFP-T3-1470-c 1470nm cWDM laser
SFP-T3-1490-c 1490nm cWDM laser
SFP-T3-1510-c 1510nm cWDM laser
SFP-T3-1530-c 1530nm cWDM laser
SFP-T3-1550-c 1550nm cWDM laser
SFP-T3-1570-c 1570nm cWDM laser
SFP-T3-1590-c 1590nm cWDM laser
SFP-T3-1610-c 1610nm cWDM laser
Time Division Multiplexing 1.1
VeNTura
4-Channel SdI/aSI Optical Regenerator
vS411-OO
•Opticalregenerationofmultichanneldigitaldataonasinglefiber•Designedtoregenerateopticalsignalofdatarate1.3025Gbpsfromany
VS411-eO• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemux
output• Lossofopticalinput,laserfailureLEDs• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550orany
iTu cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS411-EO
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
1310/1550/CWDM
1.3Gbps 1.3Gbps
CH1
CH2
CH3
CH4
RS422
VS411-OE
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
APDRcv’r
CH1
CH2
CH3
CH4
RS422
270Mbps 270Mbps
VS411-OO
1310/1550/CWDM
1.3Gbps 1.3Gbps
APDRcv’r
20 | network-electronics.com
4-Channel SdI/aSI Fiber multiplexer/demultiplexer with Protection
vS411-EO-SFP-SFP* / vS411-OE-SFP-SFP*
•Multichanneldigitalvideoonasinglefiber•Optionalsecondopticaloutputfornetworkpathdiversity(multiplexer)
and optional second optical receiver for automatic switchover and network resilience (demultiplexer)
•Designedtotransport270MbpssignalscomplyingwithSMPTE-259M,305M and DVb-aSi eN-50083-9
• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemultiplexer output
• LEDstoindicatelossofvideo,lossofopticalinputandlaserfailure• Automaticcableequalizationupto300mforBelden8281• SelectabletestpatterngeneratorforeachchannelwithEDH• Enable/disablecontrolforeachchannel• EDHQoSmonitoringoneachchannelforSDIatmultiplexerinputand
demultiplexer output• AuxiliaryRS422channel• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany
iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
Time Division Multiplexing
VeNTura
1.1
*Scheduled availability Q2 2008
VS411-EO
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
1310/1550/CWDM1.302Gbps
1310/1550/CWDM
CH1
CH2
CH3
CH4
RS422
Front panel monitor
VS411-OE
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
APD Rcv’r
APD Rcv’r
CH1
CH2
CH3
CH4
RS422
Front panel monitor
270MbpsNetwork
network-electronics.com | 21
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 4 (VS411-eO)
# of outputs 4 (VS411-Oe)
Monitors 1 (VS411-eO and VS411-Oe)
connector bNc
impedance 75 ohms
Data rate 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of outputs 2 SFPs
connector Sc/Pc
Data rate 1.3gbps
laser type SFP
laser wavelengths 1310nm, 1550nm, cWDM, DWDM
Output power level –1dbm minFiber type Single mode
OPtICaL RECEIvER# of inputs 2 SFPs
connector Sc/Pc
receiver type aPD SFP
input wavelengths 1260nm – 1620nm
Sensitivity ≤–32dbm
Max input power ≥–8dbmFiber type Single mode
RS422# of channels 1
connector 3 pin polarized headerData rate up to 1Mbps
LEd INdICatORSVS411-eO-SFP-SFP VS411-Oe-SFP-SFP
channels 1-4 channels 1-4
LeD LiGhtSgreen SignalYellow loss of signalFlash green Test pattern onlyFlash green Test pattern onlylaser failure loss of input
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V, +12V, -12V
Power consumption 9W max
Operating temperature 0 ˚c to 50 ˚c chassis ambient
Storage temperature –40 ˚c to 85 ˚c ambient
relative humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms On each video channel of eO and Oe loss of video eDH On network interface laser transmitter failure on eO loss of inputs on Oe
Status On each video channel of eO and Oe channel On or Off Format SDi or aSi SDi rate 525/60 or 625/50 Pattern generator enabled or disabled Pattern generator 525 or 625 line On network interface laser present on eO Wavelength on eO receiver present on Oe Optical power on Oe general Model and serial number Firmware revision
controls On each video channel of eO and Oe enable or disable channel Force SDi or aSi enable or disable test pattern On network interface enable or disable laser on eO
ORdERINg OPtIONSVS411-eO-SFP-SFP Transmitter w/SFP dual cage, no optics
installed
VS411-Oe-SFP-SFP receiver with dual SFP cages and one SFP installed
SFp optionSSFP-T3-1310-S 1310nm laser
SFP-T3-1550-S 1550nm laser
SFP-T3-1470-c 1470nm cWDM laser
SFP-T3-1490-c 1490nm cWDM laser
SFP-T3-1510-c 1510nm cWDM laser
SFP-T3-1530-c 1530nm cWDM laser
SFP-T3-1550-c 1550nm cWDM laser
SFP-T3-1570-c 1570nm cWDM laser
SFP-T3-1590-c 1590nm cWDM laser
SFP-T3-1610-c 1610nm cWDM laser
SFP-r3-1aPD aPD SFP receiver
vS411-EO-SFP-SFP* / vS411-OE-SFP-SFP*
Time Division Multiplexing 1.1
VeNTura
*Scheduled availability Q2 2008
22 | network-electronics.com
dIgItaL vIdEOStandards SDi (SMPTe-259M), SDTi (SMPTe-305M),
DVb-aSi (eN50083-9)
# of inputs 8 (VS811-eO)
# of Outputs 8 (VS811-Oe)
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 2
connector Sc/Pc
Data rate 3.125 gbps
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type aPD SFP
input Wavelengths 1260nm–1620nm
Sensitivity ≤-30dbm
Max input Power –8dbmFiber Type Single mode
RS422# of channels 1
connector 3 pin polarized headerData rate up to 500 Kbps
LEd INdICatORSVS811-eo VS811-oechannel 1 loss of video channel 1 loss of video channel 2 loss of video channel 2 loss of video channel 3 loss of video channel 3 loss of video channel 4 loss of video channel 4 loss of video channel 5 loss of video channel 5 loss of video channel 6 loss of video channel 6 loss of video channel 7 loss of video channel 7 loss of video channel 8 loss of video channel 8 loss of video SFP Primary laser failure loss of primary input SFP Second. laser failure loss of secondary input Dc power Dc power
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of video laser transmitter failure (VS811-eO) loss of input (VS811-Oe)
Status channels enabled/disabled (VS811-eO) Selected test pattern Test pattern generator enabled/disabled Model and serial number SFP transmitter installed Transmitter wavelength laser power SFP receiver installed Optical receiver power
controls Test pattern generator enable/disable input channel enable/disable (VS811-eO) laser transmitter enable/disable (VS811-eO)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V
Power consumption 10W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS811-eO-SFP Multiplexer card w/dual SFP cages,
no optics installed
VS811-Oe-SFP Demultiplexer card w/dual SFP cages, no optics installed
SFP-T3-1310-S 1310nm SFP laser module
SFP-T3-1550-S 1550nm SFP laser module
SFP-T3-1470-c 1470nm cWDM SFP laser module
SFP-T3-1490-c 1490nm cWDM SFP laser module
SFP-T3-1510-c 1510nm cWDM SFP laser module
SFP-T3-1530-c 1530nm cWDM SFP laser module
SFP-T3-1550-c 1550nm cWDM SFP laser module
SFP-T3-1570-c 1570nm cWDM SFP laser module
SFP-T3-1590-c 1590nm cWDM SFP laser module
SFP-T3-1610-c 1610nm cWDM SFP laser module
SFP-r3-aPD SFP aPD receiver
8-Channel SdI/aSI multiplexer/demultiplexer
vS811
Time Division Multiplexing
VeNTura
1.1
•Multichanneldigitaldataonasinglefiber•Optionalsecondopticaloutputfornetworkpathdiversity(Mux)and
optional second optical receiver for automatic switchover and network resilience (Demux)
•Designedtotransport270MbpssignalscomplyingwithSMPTE-259M,305M, and DVb-aSi eN-50083-9
• RemovestimingandalignmentjitterfromtheSDIsignalsattheDemuxoutput
• Selectabletestpatterngeneratorforeachchannel:Colorbars,PLLpathological, equalizer pathological and black field
• Enable/disablecontrolforMuxinputchannels• Automaticcableequalizationupto300mforBelden8281• AuxiliaryRS422channel• SmallFormfactorPluggable(SFP)opticsavailable
in 1310, 1550 or any iTu cWDM or DWDM wavelength
•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvanced
element Management System that provides remote status, alarms and configurations via SNMP and ethernet
VS811-EO
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
1310/1550/CWDM
1310/1550/CWDMCH5
CH6
CH7
CH8
RS422
270Mbps
CH1
CH2
CH3
CH4
VS811-OE
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
CH5
CH6
CH7
CH8
RS422
270Mbps
CH1
CH2
CH3
CH4APD Rcv’r
APD Rcv’r270MbpsNetwork
3.125Gbps 3.125Gbps
network-electronics.com | 23
dIgItaL vIdEOStandards 3.125gbps
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
Data rate 3.125gbps
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level –1dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type aPD SFP
input Wavelengths 1260nm–1620nm
Sensitivity ≤-30dbm
Max input Power –8dbmFiber Type Single mode
LEd INdICatORSlaser failureloss of input
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms signals.
ELEmENt maNagEmENtcompatible with the FcS183 eMS and FcS183-aeMS which feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms laser transmitter failure loss of input
Status Model and serial number SFP laser installed laser enable laser wavelength (nm) laser power (dbm) SFP receiver installed Optical receiver power (dbm)
controls laser transmitter enable/disable
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Power consumption +3.3V, +5V, 5W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%
compliance NebS level 3, ul, cSa, ce, Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS811-OO-SFP Optical regenerator with SFP-r3-aPD receiver
installed
SFp optionSSFP-T3-1310-S 1310nm laser
SFP-T3-1550-S 1550nm cWDM laser
SFP-T3-1470-c 1470nm cWDM laser
SFP-T3-1490-c 1490nm cWDM laser
SFP-T3-1510-c 1510nm cWDM laser
SFP-T3-1530-c 1530nm cWDM laser
SFP-T3-1550-c 1550nm cWDM laser
SFP-T3-1570-c 1570nm cWDM laser
SFP-T3-1590-c 1590nm cWDM laser
SFP-T3-1610-c 1610nm cWDM laser
Time Division Multiplexing 1.1
VeNTura
8-Channel SdI/aSI Optical Regenerator
vS811-OO
•Opticalregenerationofmutichanneldigitaldataonasinglefiber•Designedtoregenerateopticalsignalofdatarate3.125Gbpsfromany
VS811-eO• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemux
output• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550orany
iTu cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS811-EO
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
1310/1550/CWDMCH5
CH6
CH7
CH8
RS422
270Mbps
CH1
CH2
CH3
CH4
VS811-OE
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
CH5
CH6
CH7
CH8
RS422
270Mbps
CH1
CH2
CH3
CH4
APD Rcv’r
3.125Gbps 3.125Gbps
1310/1550/CWDM
1310/1550/CWDM
3.125Gbps
APDRcv’r
3.125Gbps
1310/1550/CWDM
APDRcv’r
VS811-OO
24 | network-electronics.com
muXinput SiGnaLSinput signal type 270Mbps DVb-aSi - eN50083-9 or aSi2,
containing data from 800kbps up to 43.8Mbps
Maximum Payload DS3 43.8Mbps e3 33.9Mbps
Number of inputs 4
input/output levels 800mV(pk-pk)
input impedance (aSi) 75 ohm
cable equalizer (max) 200m of belden 8281 cable
output SiGnaLSOutput signal type 45Mbps – DS3 (b3ZS)
34Mbps – e3 (HDb3)
Framing DS3 c-bit parity e3 g.751
impedance/connector 75 ohm / bNcNumber of outputs 2 identical buffered outputs
dEmuXinput SiGnaLSinput signal type 45Mbps – DS3 (b3ZS) c-bit parity
34Mbps – e3 (HDb3) g.751
impedance/connector 75 ohm / bNc
Number of inputs 2 with automatic switching for protection and 1 loop through for receiver chaining
output SiGnaLSOutput signal type 270Mbps DVb-aSi - eN50083-9
Number of outputs 4 x 270Mbps
DS3 / e3
impedance/connector 75 ohm / bNc
POWER CONSumPtION/ENvIRONmENtVPg9345TX/rX <20W (all options)
Operating temperature 0 °c to +50 °c
Storage temperature –10 °c to +70 °c
Humidity 20% – 80% rH, non-condensing
NEtWORk maNagEmENt/aLaRmSmuX controLSinput rate setting ch 1 to 4: input bit rate ceiling, set to a
resolution of 0.1Mbps
rS Fec ch 1 to 4: add / don’t add
DVb checking ch 1 to 4: check for PiD, PaT, PMT, SeS or eS errors
DVb error threshold Sets thresholds for alarms
Output mode Selects network interface type
channel iD codes ch 1 to 4: Sets each TS’s conditional access codes (2)
muX aLarmS (Set aS either; none, major or minor)card fail card fault
input loss ch 1 to 4: No input
input rate violation ch 1 to 4: allowable input bit rate exceeded
configuration error Wrong input type selected
DVb error channel 1 to 4: rS, PiD, PaT, PMT, SeS or eS errors
DemuX controLSStandby protection switch enable or disable automatic network standby
switching
Switch persistence error persistence to enable protection switch to operate
input mode Selects network interface type
ber threshold Sets ber alarm threshold
Non-consec. error Network error threshold
channel iD codes ch 1 to 4: Sets each TS’s conditional access codes (2)
DemuX aLarmS (Set aS either; none, minor or major)card fail card fault
input loss loss of frame alignment
configuration error ch 1 to 4: error in data type or conditional access code
input errors ch 1 to 4: rate exceeds programmed thresholds
Standby input selected Standby network input is being used by DeMuX
DVb error channel 1 to 4: rS, SeS errors
ORdERINg OPtIONScontact factory for ordering information.
dS3/E3 dvB-aSI tS multiplexer Bandwidth Optimizer
vS9345
Time Division Multiplexing
VeNTura
1.1
•MultiplexesfourDVB-ASIinputsintooneDS3(45Mbps)orE3(34Mbps)output
•MaximizesASIpayloadcapacity(upto43.8Mbpsovera45Mbpsnetwork)• Inputscanbeswitchedtoanyoutput• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity
available to client (to a resolution of 0.1Mbps per TS) •DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2
transmission• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure
content delivery•CompatiblewiththeFCS183AdvancedNetworkManagementSystemthat
provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 25
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs (VS811-SM-48) 8 x 270Mbps
# of Outputs (VS811-SD-48) 8 x 270Mbps
connector bNc
impedance 75 Ohm
Data rate 270Mbps ± 100ppmequalization 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1 primary with optional secondary (SFP)
connector Sc/Pc
Data rate 2.488gbps (Oc-48/STM-16)
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1 primary with optional secondary (SFP)
connector Sc/Pc
receiver Type aPD SFP
input Wavelengths 1260nm – 1620nm
Sensitivity ≤-30dbm at ber of 10e-10
Max input Power –8dbm at ber of 10e-10Fiber Type Single mode
RS422# of channels 1
connector 3 pin polarized headerData rate up to 500 Kbps
LEd INdICatORSVS811-SM-48 VS811-SD-48
channels 1-8 channels 1-8
LeD LiGhtSgreen SignalYellow loss of signal Flash green Test pattern only
SFP Primary laser failure loss of primary input
SFP Secondary laser failure loss of secondary inputDc Power Dc power
FRamINgOc-48 STS-48c, aNSi, T1.105STM-16 STM-16;ITU-RecG.707
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of video and section, line, path laser transmitter failure (VS811-SM-48) loss of input (VS811-SD-48)
Status channels enabled/disabled (VS811-SM-48) Selected test pattern Test pattern generator enabled/disabled Model and serial number
controls Optical standard (SONeT/SDH) Test pattern generator enable/disable input channel enable/disable (VS811-SM-48) laser transmitter enable/disable (VS811-SM-48)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V
Power consumption 10W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS811-SM-48 8X270Mbps multiplexer to SONeT/SDH
Oc-48/STM-16, 2.485gbps
VS811-SD-48 8x270Mbps demultiplexer to SONeT/SDH Oc-48/STM-16
SFP-T3-1310-S 1310nm SFP laser module
SFP-T3-1550-S 1550nm SFP laser module
SFP-T3-XX-D where XX = iTu DWDM grid number
SFP-r3-aPD SFP aPD receiver
SONeT/SDH 1.1
VeNTura
SdI/aSI SONEt/SdH multiplexer/demultiplexer
vS811-S
•MultichanneldigitalvideooverOC-48corSTM-16networktributary•OptionalsecondopticaloutputatMuxandoptionalsecondoptical
receiver at Demux for path diversity with automatic switch over•ManagesSONET/SDHpointeradjustments• Removestimingandalignmentjitterfromthe270Mbpssignalsatthe
Demux output• Formatindependent270MbpsinputscancarrySDI,SDTIandDVB-ASI• Enable/disablecontrolforMuxinputchannels• Selectabletestpatterngeneratorforeachchannel:colorbars,PLL
pathological, equalizer pathological and black field• Automaticcableequalizationproviding300mat270Mbps• AuxiliaryRS422channelforinbandmanagement• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany
iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•Configurableto1HDand2SDs; scheduled availability in 2008
VS811-SM-48
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
1310/1550/DWDM
1310/1550/DWDM
STM-16
OC-48c
CH5
CH6
CH7
CH8
RS422
CH1
CH2
CH3
CH4
VS811-SD-48
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)CH5
CH6
CH7
CH8
RS422
CH1
CH2
CH3
CH4APD Rcv’r
APD Rcv’rSONET/SDHNetwork
26 | network-electronics.com
vS402 CWdmStandards iTu-T g.694.2
# of i/O channels 2
common Output 1
connector Sc/Pc
Optical Wavelengths (nm) 1310, 1550
channel Separation 20nm
insertion loss 1db max
link loss w/mux/demux combo ≤2.0db
return loss ≥50db
input Power 300mW max
Polarization Dependent loss ≤0.1dbFiber Type Single mode
vS404 CWdmStandards iTu-T g.694.2
# of i/O channels 4
common Output 1
connector Sc/Pc
Optical Wavelengths (nm) 1510, 1530, 1550, 1570
channel Separation 20nm
insertion loss 1db max
link loss w/Mux/Demux combo ≤2.0db
return loss ≥50db
input Power 300mW max
Polarization Dependent loss ≤0.1dbFiber Type Single mode
vS408 CWdmStandards iTu-T g.694.2
# of i/O channels 8
common Output 1
connector Sc/Pc
Optical Wavelengths (nm) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610
channel Separation 20nm
insertion loss 1.5db max
link loss w/mux/demux combo ≤2.5db
return loss ≥50db
input Power 300mW max
Polarization Dependent loss ≤0.1db
Fiber Type Single mode
LEd INdICatORSVS402/VS404/VS408 Dc power
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
Status Model and serial number
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V
Power consumption <1W
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS402-cWDM 2-channel cWDM optical multiplexer/
demultiplexer
VS404-cWDM 4-channel cWDM optical multiplexer/demultiplexer
VS408-cWDM 8-channel cWDM optical multiplexer/demultiplexer
2-Channel, 4-Channel and 8-Channel Optical CWdm
vS402/404/408
Wavelength Division Multiplexing
VeNTura
1.1
• Bidirectionalchannels• Environmentallystable• 20nmchannelspacing• Lowreturnloss• Verylowinsertionloss• ITUG.694.2standardscompliant•Highchannelisolation•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 27
vS409 CWdmStandards iTu-T g.694.2
# of i/O channels 9
common Output 1
connector Sc/Pc
Optical Wavelengths (nm) 1310, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610
channel Separation 20nm
insertion loss 1.8db max
link loss w/mux/demux combo <3.0db
return loss ≥50db
input Power 300mW max
Polarization Dependent loss ≤0.1dbFiber Type Single mode
LEd INdICatORSVS409 Dc power
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
Status Model and serial number
PHySICaL aNd ENvIRONmENtaL
resides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V
Power consumption <1W
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS409-cWDM 9-channel cWDM optical multiplexer/
demultiplexer
Wavelength Division Multiplexing 1.1
VeNTura
9-Channel Optical CWdm
vS409
• 8CWDMwavelengthsplus1310nmlegacy• Bidirectionalchannels• Environmentallystable• 20nmchannelspacing• Lowreturnloss• Verylowinsertionloss• ITUG.694.2standardscompliant•Highchannelisolation•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
28 | network-electronics.com
OPtICaL# of inputs 1
# of Outputs 2
connector Sc/Pc
input Wavelength range 1260nm–1620nm
insertion loss 3.6db max on each output
return loss ≥–55db
Output Power 50/50 split
Thermal Stability ±0.1dbFiber Type Single mode
LEd INdICatORSVS401SP Dc power
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
Status Model and serial number
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V
Power consumption <1W
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS401SP 2-channel optical splitter
2-Channel Optical Splitter
vS401SP
Wavelength Division Multiplexing
VeNTura
1.1
•Halfpowersplit—50/50• Environmentallystable• Lowinsertionloss,typicallylessthan3.6dBincludingsplit,connectorand
internal losses•WidewavelengthrangecoveringallCWDMwavelengths•Directivitybetterthan50dB• Lowpolarizationdependentloss•NEBSLevel3compliant
network-electronics.com | 29
OPtICaL# of input channels 2 (primary and secondary)
# of Outputs 1
connector Sc/Pc
insertion loss 2db max
Switch channel crosstalk >55db
Switching Time <10ms
Switch Triggered at –35dbm
Switch Stimulation automatic (at -35dbm) Manual (Front panel push button) element management (forced)
Switch Mode Settings revertive Non-revertive
Wavelength range 1260nm–1620nmFiber Type Single mode
LEd INdICatORSVS401SW Primary input present
Secondary input present Primary input selected Secondary input selected
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of primary input loss of secondary input
Status Primary input (present/not present) Secondary input (present/not present) Selected input (primary/secondary) Selected mode (revertive/non-revertive) Model and serial number
controls input select (primary/secondary) Mode select (revertive/non-revertive)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V
Power consumption <1W
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS401SW 2-channel optical switch
Wavelength Division Multiplexing 1.1
VeNTura
2-Channel Optical Switch
vS401SW
• 2X1opticalpathprotection•Directionallightoneachinput• Eachpathisfullybi-directional• AcceptsallCWDMwavelengths• Revertiveandnon-revertiveswitchingmodes• Fast10msswitchingtime• Frontpanelandremotenetmanmanualswitch• Lowloss<2dB•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
30 | network-electronics.com
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
# of Outputs 2
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
dIgItaL audIOStandards aeS/ebu (SMPTe-272M)
# of inputs 2 (VS312-e)
# of Outputs 2 (VS312-D)
connector bNc (unbalanced) 3-pin terminal (balanced)
impedance 75 ohm (unbalanced) 110 ohm (balanced)
Sampling rates 48 KHz, 44.1 KHz and 32 KHz
Output rate 48 KHz
resolution 20-bit
Format Synchronous or asynchronousOutput level 1 Vp-p (unbalanced)
2 Vp-p min (balanced)
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4 (l1,r1,l2,r2) (1 group) (VS312-e)
# of Outputs 4 (1 group) (VS312-D)
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted -90dbFS
Frequency response 0.5db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0dbFS)
iMD <0.05% SMPTe @ +2dbu
crosstalk between ch. 95dbinput/Output level 0dbFS = +24dbu (Hi-Z)
0dbFS = +18dbu (600 ohm)
LEd INdICatORSVS312-e VS312-Derror detection handling error detection handling loss of input loss of input loss of video loss of video SDi input present SDi input present aSi input present aSi input present loss of audio 1 loss of aeS 1–2 loss of audio 2 loss of analog 1–4 loss of audio 1 loss of audio 2
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of input loss of video eDH errors loss of audio VS312-e uplink transmitter alarms (VS312-D)
Status aSi input detected SDi input detected incoming embedded audio detected Model and serial number
controls Force to aSi mode enable/disabled Select pre-embedded or local embedding mode (VS312-e) SDi generator remove or retain audio from SDi output (VS312-D) iD setting for the VS312 (0-65535)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 10W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS312-e SDi audio embeddder
VS312-D SDi audio de-embedder
SdI/aSI audio Embedder/de-Embedder
vS312
converters and embedders
VeNTura
1.1
• SDI,SDTIandDVB-ASIcompatiblewithautomaticinput signal detection
• RemovestimingandalignmentjitterfromtheSDIsignal• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest• EmbedsuptofourchannelsofanalogaudioortwochannelsofAESdigital
audio, or mix of both• Asynchronousorsynchronous48Khzaudiowith20-bitaudioresolution• Availablein600ohmorHi-Z•DefaultSDIkeep-alivesignal• Lossofvideo,EDH,SDIvideopresent,lossofinput,lossofaudioLEDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS312-E
AnalogAudio
DigitalAudio
CH1 (L1)
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
CH2 (R1)
CH3 (L2)
CH4 (R2)
AES1
AES2
270Mbps 270Mbps
270Mbps
VS312-D
AnalogAudio
DigitalAudio
CH1 (L1)
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
CH2 (R1)
CH3 (L2)
CH4 (R2)
AES1
AES2
270MbpsNetwork
network-electronics.com | 31
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
# of Outputs 2
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
dIgItaL audIOStandards aeS/ebu (SMPTe-272M)
# of inputs 2 (VS501-eO)
# of Outputs 2 (VS501-Oe)
connector bNc (unbalanced) 3-pin terminal (balanced)
Note: see VS312 data sheet for more detailed specifications
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4(VS501-eO)
# of Outputs 4 (VS501-Oe)
connector 3-pin terminal
Note: see VS312 data sheet for more detailed specifications
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSVS501-eO VS501-OeNote: same as the VS312
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Note: same as the VS312 plus the following:
alarms laser transmitter failure (VS501-eO) Optical low light (VS501-Oe) VS501-eO uplink transmitter alarms (VS501-Oe)
Status VS501-eO uplink transmitter status (VS501-Oe) Model and serial number laser wavelength laser power SFP receiver installed Optical receiver installed
controls laser transmitter enable/disable (VS501-eO) electrical/optical receiver input mode (VS501-Oe) SDi pattern enable iD setting for the VS501 (0-65535)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W typical
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS501-eO Transmitter card
VS501-Oe PiNFeT receiver
SFp optionSSFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c SFP-TV-1610-c SFP-rV-PiN
converters and embedders 1.1
VeNTura
SdI/aSI 270mbps audio Embedder/de-Embedder and Fiber Optic transport
vS501
• SDI,SDTIandDVB-ASIcompatible• RemovestimingandalignmentjitterfromtheSDIsignal• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest• EmbedsuptofourchannelsofanalogaudioortwochannelsofAESdigital
audio, or mix of both• Asynchronousorsynchronous48Khzaudiowith20-bitaudioresolution•DefaultSDIkeep-alivesignal• AESaudiopresent,analogaudiopresent,SDIvideopresent,ASIvideo
present, laser fail, Dc power, eDH, loss of input and loss of audio leDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• Smallformfactorpluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet VS501-EO
AnalogAudio
DigitalAudio
CH1 (L1)
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
CH2 (R1)
CH3 (L2)
CH4 (R2)
AES1
AES2
270Mbps 270Mbps
PIN Rcv’r
270Mbps
270Mbps
1310/1550/CWDMVS501-OE
AnalogAudio
DigitalAudio
CH1 (L1)
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
CH2 (R1)
CH3 (L2)
CH4 (R2)
AES1
AES2
270Mbps
270MbpsNetwork
32 | network-electronics.com
Composite analog video and audio to SdtI 270mbps w/Fiber Optic transport
vS551
converters and embedders
VeNTura
1.1
•ConvertsNTSC/PALanalogvideotoSDTIfortransportovera270Mbpsnetwork
• Embedsuptofourchannelsofanalogaudio• 12-bitvideoquantization,20-bitaudioquantization•Unintrusiveaudiomonitoringandleveladjustment•Compositetestpatterngenerator• Lossofinput,lossofvideo,EDH,lossofaudioLEDs•Optical(optional)andelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS551-ADC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
270Mbps
SDTI(SMPTE-305M)
1310/1550/CWDM
VS551-DAC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
270Mbps
SDTI(SMPTE-305M)
270MbpsNetwork
| network-electronics.com
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1 (VS551-aDc)
# of Outputs 1 (VS551-Dac)
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential Phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M)
# of inputs 1 (VS551-Dac)
# of Outputs 1 (VS551-aDc)
connector bNc
impedance 75 ohm
Data rate up to 270Mbpsequalization up to 300m w/belden 8281
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4 (VS551-aDc)
# of Outputs 4 (VS551-Dac)
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted -90dbFS
Frequency response 0.5db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0dbFS)
iMD <0.05% SMPTe @ +2dbu
crosstalk between ch. 95dbinput/Output level 0dbFS = +24dbu (Hi-Z)
0dbFS = +18dbu (600 ohm)
OPtICaL tRaNSmIttER (OPtIONaL)# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm min (1310 and 1550) -0.5dbm min (cWDM)
Fiber Type Single mode
OPtICaL RECEIvER (OPtIONaL)# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSVS551-aDc VS551-Dacloss of audio for each ch. loss of audio for each channel
loss of video (ViD) loss of video (ViD)
eDH eDH
Dc power loss of input (lOi)
loss of frame (lOF)
Dc power
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of audio 1-4 loss of video
Status SFP present SFP transmitter wavelength SFP power level
controls laser transmitter enable/disable
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS551-aDc-SFP analog to digital converter w/audio
embedder (SFP cage included)
SFp SoLD SeparateLy
SFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c
SFP-TV-1610-c
VS551-Dac-SFP Digital to analog converter w/audio de-embedder (SFP cage included)
SFp SoLD SeparateLySFP-rV-PiN
network-electronics.com | 33
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M), SDi (SMPTe-259M),
HD-SDi (SMPTe-292M), DVb-aSi (eN50083-9), aTSc (SMPTe-310M)
# of inputs 1
# of outputs 2 electrical, 1 optical
Monitors 1 front panel
connector bNc
impedance 75 ohm
Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps
equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281
Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted -90 dbFS
Frequency response 0.5 db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0 dbFS)
iMD <0.05% SMPTe @ +2 dbu
crosstalk between channels 95 dbinput/output level 0 dbFS = +24dbu (Hi-Z)
0 dbFS = +18dbu (600 ohms)
dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)
aeS balanced (aeS3-1992) Dolby e
# of inputs 2 rear balanced or unbalanced
connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm
Signal level unbalanced 1.2 Vp-p balanced 1 to 7 Vp-p
resolution Supports up to 24 bitsSample rates 32kHz, 44kHz, 48kHz sample rates converted
to 48kHz
OPtICaL tRaNSmIttER# of outputs 1
connector Sc/Pc
laser type SFP
laser wavelengths 1310nm, 1550nm, cWDM, DWDM
Output power level -0.5dbm min (1310 & 1550) -0.5dbm min (cWDM)
Fiber type Single mode
LEd INdICatORSVideo mode HD/SD/aSi
loss of input
crc/eDH for HD/SD
audio mode analog/aeSloss of audio analog 1, 2, 3, 4
aeS 1, 2
ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating temperature 0 ˚c to 50˚c chassis ambientStorage temperature –40 ˚c to 85 ˚c ambient
ORdERINg OPtIONSVS551-D-aDc-SFP analog to digital converter with audio
embedder (SFP cage included, SFP sold separately)
For optical interface options, see Ventura SFP index data sheet.
transmitter – universal analog & digital video/audio adapter for Fiber Optic transport
vS551-d-adC-SFP
• Automaticallydetectsvideoinputformat•ConvertsNTSC/PAL/PAL-MVideoandATSC,SD-SDI,HD-SDIandDVB-ASI
inputs to SDTi/SDi and optical output for transport over 270Mbps network•Handles525/625SD-SDIand1.4835/1.485GbpsHD-SDI•Compositetestpatterngenerator•ConvertsuptofourchannelsofanalogaudiotoAES•DolbyE–compatible•Non-intrusiveaudiomonitoringandleveladjustment• EmbedsAESconvertedfromanalogaudioordirect-fedAESintoSDTI,
SD-SDi or HD-SDi•WarningLEDsforlossofvideo,lossofaudio,CRC/EDH• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550,andany
iTu cWDM or DWDM wavelength• EngineeredtomeetNEBSLevel3requirements•CompatiblewithFCS183AEMSandEMSelementmanagers
converters and embedders 1.1
VeNTura
34 | network-electronics.com
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of outputs 2
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M)
SDi (SMPTe-259M) HD-SDi (SMPTe-292M) DVb-aSi (eN50083-9) aTSc (SMPTe-310M)
# of inputs 1 optical (see optical spec), 1 electrical
# of outputs 2
Monitors 1 front panel
connector bNc
impedance 75 ohm
Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps
equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281
Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard
aNaLOg audIOStandards exceeds rS250c short haul specs
# of outputs 4
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48KHz
Quantization 20-bit
SNr unweighted -90dbFS
Frequency response 0.5db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, at 0dbFS)
iMD <0.05% SMPTe at +2 dbu
crosstalk between channels 95dbinput/output level 0dbFS = +24dbu (Hi-Z)
0dbFS = +18dbu (600 ohms)
dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)
aeS balanced (aeS3-1992) Dolby e
# of inputs 2 rear balanced or unbalanced
connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm, unbalanced
Signal level unbalanced 1.2Vp-p balanced 1 to 7Vp-p
resolution Supports up to 24 bits
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver type SFP - aPD
input wavelengths 1260nm - 1620nm
Sensitivity ≤-34dbm
Max input power –8dbm (+7dbm with 15db attenuator)Fiber type Single mode
LEd INdICatORSVideo Mode HD/SD/aSi
loss of input (local and remote)
crc/eDH for HD/SD
audio mode analog/aeSloss of audio analog 1, 2, 3, 4
aeS 1, 2 (local and remote)
ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambientStorage Temperature –40 ˚c to 85 ˚c ambient
ORdERINg OPtIONSVS551-D-Dac-SFP universal analog and digital video and audio
fiber receiver
Receiver – universal analog and digital video and audio adapter for Fiber Optic transport
vS551-d-daC-SFP
converters and embedders
VeNTura
1.1
• ReceivesallSD-SDI,HD-SDI,ASIandATSCopticallyandelectrically•De-embedsfourchannelsofaudiofromSD-SDIandHD-SDIandprovides
aeS and analog outputs •DolbyE–compatible•ConvertsSDTItoNTSC/PAL/PAL-M•Non-intrusiveanalogaudiomonitoringandleveladjustment• Lossofinput,lossofvideo,EDH/CRC,lossofaudioLEDs• RemotelossofvideoandlossofaudioLEDs• SmallFormfactorPluggable(SFP)opticswithAPDreceiverforoptimum
sensitivity• EngineeredtomeetNEBSLevel3requirements•CompatiblewiththeFCS183comprehensiveelementmanagementsystem
that provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 35
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines) Pal (625 lines)
# of inputs 1 (VS601-aDc)
# of Outputs 1 (VS601-aDc) 2 (VS601-Dac)
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 130m w/belden 8281
SNr >70db
Differential gain <2% (NTSc) <1% (Pal)
Differential Phase <0.7° (NTSc) <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M)
# of inputs 1 (VS601-Dac)
# of Outputs 2 (VS601-aDc)
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
LEd INdICatORSVS601-aDc VS601-Dacloss of video loss of video
loss of input
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of video loss of input (VS601-Dac)
Status 75 ohm termination ON/OFF (VS601-aDc) Model and serial number
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V, +12V, -12V
Power consumption 7W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS601-aDc composite analog video to SDTi converter
VS601-Dac SDTi to composite analog video converter
converters and embedders 1.1
VeNTura
Composite analog video to SdtI 270mbps Converter
vS601
•ConvertsNTSC/PALanalogvideotoSDTIfortransportovera270Mbpsnetwork
• ExceedsRS250Cshorthaulspecifications• 12-bitquantization• Analogloopthruand75ohmterminationswitch• FrontpanelmonitorportwithEQandgainadjustment•DefaultSDTIkeep-alivesignal• LossofinputandlossofvideoLEDs• Automaticcableequalizationupto300mforBelden8281•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS601-ADC VS601-DACAnalog Video(NTSC/PAL)
Analog Video(NTSC/PAL)
270Mbps
SDTI(SMPTE-305M)
270MbpsNetwork
270Mbps
SDTI(SMPTE-305M)
36 | network-electronics.com
gENERaLinput signal types NTSc, wideband 12 MHz analog passband
No. of channels/chassis 10
Wideband mode spec. NaSa: 79K33043 Specification of Wideband Fiber Optic Terminal equipment
Video mode specifications rS-250c Short Haul (video mode)Framing SMPTe 305M / SMPTe 259M
vS621-adC INPut INtERFaCEinput levels 1 Vpp*, nominal ± 3db (adjustable)
input impedance 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable)
return loss >40db, 0–5 MHz >30db, 0–10 MHz
common mode rejection >70db at 60Hz
cable equalizer max 130m, up to 12MHz (belden 8281)
equalization frequency
response error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000TX
vS621-daC OutPut INtERFaCEOutput levels 1 Vpp*, nominal ± 3db (adjustable)
output impeDancerear panel Dual 75 ohm* unbalanced or 124 ohm
balanced (user-selectable)Front panel 75 ohm unbalanced, flat, pre-equalized
monitor port
return loss >40db, 0–5 MHz
Module-to-Module isolation >60db, 0–5 MHz
cable equalizer max. ith 130m, up to 12MHzequalization frequencyresponse error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000rX
OPtICaL INtERFaCE PaRamEtERS# of Outputs 1 (VS621-aDc)
# of inputs 1 (VS621-Dac)
connector Sc/Pc
laser Type SFP
laser Wavelength 1310nm, 1550nm, cWDM, DWDM (please contact us for DWDM optics)
Output Power level–aDc -0.5dbm min
Sensitivity–Dac -34dbmFiber Type Single mode
SyStEm FREquENCy RESPONSEVideo Mode ± 0.15db, 10Hz–5MHzanalog/Digital Mode ± 0.35db, 10Hz–8MHz
± 0/-3db, 8MHz–12MHz
SdI ELECtRICaL INtERFaCE PaRamEtERSPhysical interface SMPTe 259M
Format SMPTe 305M
coax Drive up to 300m (belden 8281)cable eQ up to 300m (belden 8281)
gENERaL vIdEO PERFORmaNCE SPECIFICatIONSgain inequality ± 1 ire
Delay inequality ± 10ns
intermodulation <1% for 50% aPl
chroma non-linear gain distortion <0.5% for 50% aPl
chroma non-linear phase distortion <0.5° for 50% aPl
luminance non-linearity <2%
Differential gain <1%
Differential Phase <0.5°
Transient non-linearity <1%
Dynamic gain of Picture Signal <1%
Signal to low Frequency Noise pp >53db
luminance Signal-to-weighted rMS Noise >68db
Signal-to-Periodic Noise >67dbSignal-to-impulse Noise >65db
aNaLOg/data SIgNaL dIStORtIONSTotal harmonic distortion >40db below 1 Vpp sinewave
Signal-to-noise ratio >50db at -27dbm receiver optical power, 1 Vpp signal to 12MHz band-limited noise
Peak-to-peak jitter <5% up to 4Mbps, tested with 1 Vpp NrZ signal and 215 -1 pseudo-random bit sequence
Overshoot <10%bit error rate <1 x 10-9, 1kbps to 4Mbps
PHySICaL aNd ENvIRONmENtaLTemperature range 0-50 °c ambientPower requirements <7W
ORdERINg OPtIONSVS621-PcO5000TX analog to digital
VS621-PcO5000rX Digital to analog
VS621-3V-PcO5000TX analog to digital (3Vpp/50 ohm)
VS621-3V-PcO5000rX Digital to analog (3Vpp/50 ohm)
analog to SdtI video/data Converter
vS621
converters and embedders
VeNTura
1.1
• EmulatesthefunctionsofthePCO5000fiberlink• Accommodatesbothvideoanddatainputs•Convertscompositevideosignalorwideband12MHzanalogbandwidth
into a SMPTe 305M SDTi stream•Morethan30dBopticallinkbudget;lownoise,highlinearityconversion• LEDindicatorsandexternalalarmcontactsforvideo,dataandoptics• Balancedandunbalancedinputsandoutputs• Frontpanelbufferedmonitoroutputs• Frontpanellevel(orgain)andcableequalizationadjustments• 3Vpp/50ohmversionavailable•NEBSLevel3compliant• SFPopticssupportingallstandardandCWDMapplications
network-electronics.com | 37
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines) Pal (625 lines)
# of inputs 1 (VS651-aDc) 1 reference video (VS651-aDc)
# of Outputs 2 (VS651-Dac)
connector bNc
impedance 75 ohm
Quantization 10-bit or 8-bit
equalization up to 150m w/belden 8281
SNr >70db
Differential gain <2% (NTSc) <1% (Pal)
Differential Phase <0.7° (NTSc) <0.5° (Pal)
dIgItaL vIdEOStandards SDi (SMPTe-259M)
# of inputs 1 (VS651-Dac)
# of Outputs 2 (VS651-aDc)
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
LEd INdICatORSVS651-aDc VS651-Dac625/525 lines NTSc video 10bit/8bit Pal video Sync (analog timing reference) loss of input
lock (composite Y input present) Dc power +5V configuration complete
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of input (VS651-Dac) Dc power alarm (VS651-Dac)
Status Selected mode NTSc/Pal/auTO (VS651-Dac) 270Mbps Pal detected/not detected (VS651-Dac) 270Mbps NTSc detected/not detected (VS651-Dac) Model and serial number (VS651-Dac)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W max
Operating Temperature 0˚ to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS651-aDc composite analog video to component SDi
digital converter
VS651-Dac component SDi digital to composite analog video converter
converters and embedders 1.1
VeNTura
Composite analog video to Component SdI 270mbps Converter
vS651
•ConvertsanalogcompositevideotodigitalcomponentSDI• 10-bitprocessingforoptimumlinearityandSNR•ComprehensiveVBIhandling• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•MeetsTV-1servicespecifications• ExceedsRS250Cshorthaulspecifications• Proprietaryselectablecomb/bandsplitfilteringfortopqualitydynamic
performance• Automaticcableequalizationupto300mforBelden8281•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
270MbpsSDI
(SMPTE-259M)
SDI
(SMPTE-295M)
VS651-ADC VS651-DACAnalog Video(NTSC/PAL)
Analog Video(NTSC/PAL)
Reference
Analog Video(NTSC/PAL)
SDI(SMPTE-259M)
270Mbps270MbpsNetwork
38 | network-electronics.com
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1 (VS661-aDc)
# of outputs 2 (VS661-Dac)
Monitors 1 (VS661-aDc)
connector bNc
impedance 75 Ohm
Quantization 10-bit
equalization up to 150m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDi (SMPTe-259M)
# of inputs 1 (VS661-Dac)
# of outputs 2 (VS661-aDc)
connector bNc
impedance 75 Ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4 (VS661-aDc)
# of outputs 4 (VS661-Dac)
connector 3-pin terminal
impedance Hi-Z or 600 Ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted –90 dbFS
Frequency response 0.5 db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0 dbFS)
iMD <0.05% SMPTe @ +2 dbu
crosstalk between channels 95 dbinput/output level 0 dbFS = +24dbu (Hi-Z)
0 dbFS = +18dbu (600 Ohm)
OPtICaL CHaRaCtERIStICS# of Outputs 1 (VS661-aDc)
# of inputs 1 (VS661-Dac)
connector Sc/Pc
laser type SFP
laser wavelength 1310nm, 1550 nm, cWDM, DWDM (please contact us for DWDM optics)
Output power level – aDc -0.5 dbm min
Sensitivity - Dac -34dbm
Fiber type Single mode
LEd INdICatORS
VS661 – aDcMinor alarm (MiN) leD (red) loss of composite video input, loss
of SDi video output, or loss of audio
Major alarm (MaJ) leD (red) board failure or communication failure
input present (ViD) leD (green) composite video input present
Power OK (Dc) leD (green) power supply ok
audio channel 1 (auD1) leD (yellow) ON with alarm, normally OFF
audio channel 2 (auD2) leD (yellow) ON with alarm, normally OFF
audio channel 3 (auD3) leD (yellow) ON with alarm, normally OFF
audio channel 4 (auD4) leD (yellow) ON with alarm, normally OFF
VS661 – Dacinput present (SDi) leD (red) SDi video present
audio group (auD) leD (yellow) audio group present
Power (+5V) leD (green) +5V Dc power present
alarm (alM) leD (yellow) flashes with alarm, normally OFF
Set-up and alignment 10 character alphanumeric display
ELEmENt maNagEmENtcompatible with FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W max
Operating temperature 0 ˚c to 50 ˚c chassis ambient
Storage temperature –40 ˚c to 85 ˚c ambient
relative humidity 5% to 85%
compliance NebS level 3, ul, cSa, ce, Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS661-aDc composite analog audio and video to
component SDi digital converter
VS661-Dac component SDi digital to composite analog audio and video converter. SFP optics sold separately
Composite analog audio and video to Component SdI 270mbps Converter w/Fiber Optic transport
vS661
converters and embedders
VeNTura
1.1
• Embedsuptofourchannelsofanalogaudio• 20-bitaudioquantization• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•MeetsUStelcoTV-1servicespecifications(GR-338-CORE)• ExceedsRS250Cshorthaulspecifications• Proprietaryselectablecomb/bandsplitfilteringfortopqualitydynamic
performance• Automaticcableequalizationupto300mforBelden8281• Frontpanelmonitorandcalibrationadjustments•User-definablealarmsbasedonpriority• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany
iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS661-ADC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
SDI270MbpsNetwork
VS661-DAC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
SDI
network-electronics.com | 39
OPERatIONThe VS905-Me-cO-Fe MPeg-2 encoder product is designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSc and analog audio are widely used. The VS905-Me-cO-Fe can be configured at any desired quality level with full MP at Ml support. ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. also, by providing aSi and ethernet network interfaces the service provider can use the equipment directly in most applications.
COmPRESSIONViDeoFormat MPeg-2 (iSO/iec 13 818-2)
Profile MP at Ml
gOP i, b, b, P
bit rate From 1Mbps to 10Mbps
Delay <140ms
auDioFormat MPeg-1 layer ii (iSO/iec 11172-3)
bit rate From 64 to 384Kbps
ENCOdER INPutS – vIdEO anaLoGSystem specifications NTSc (iTu r-bT 470.rS250-c)
Number of inputs 1
impedance 75 Ohm
Nominal level 1Vpp
bandwidth >5MHz
S/N lum Wt. >62db
cable eq >100m
otherVertical blanking interval (Vbi) transport is fully supported by stripping the Vbi lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.
an SDi pattern generator is also built into the encoder and can be switched into the processing chain ahead of the compression engine, thereby providing end-to-end quality testing of the entire compression, transport and decompression process.
LEd INdICatORSloss of audio 1 loss of audio 2 loss of video loss of ethernet activity Power supply
ELEmENt maNagEmENt
alarms loss of video loss of audio 1 loss of audio 2
controls/Status audio/video encoder parameters Transmission protocol/network settings Test pattern generator Vbi configuration
ENCOdER INPutS – audIO anaLoGNumber of inputs up to 2 independent channels
connector type Phoenix 3-pin
impedance 600 Ohm or Hi-Z
S/N (TX to rX) > 80db rms, > 62db
otheran on-board tone generator is also present that can be enabled for link and audio processing verification.
NEtWORk INtERFaCES ENCOdER FormatSaSi eN 50083-9
10/100baseT uDP/rTP, unicast and Multicast
maNagEmENt aNd CONtROLphySicaL anD enVironmentaLPower consumption <12 Watts per unit
Operating temp 0 ˚c to 50 ˚c ambient
Storage temp –40 ˚c to 85 ˚c c
relative humidity 5% to 85%
aGency compLiance Safety NebS level 3, ul, cSa, ce
eMc Fcc Part 15 class a, ce eMc directive
ORdERINg INFORmatIONVS905-Me-cO-Fe – eNc encoder
mPEg 2 Encoder NtSC + audio to aSI/100Baset Network Interfaces
vS905-mE-CO-FE*
•NTSCcompositeinputandoutput• TwoindependentchannelsofanalogaudioorfourAES/EBU**• BufferedfrontpanelmonitorforNTSCinput• VideoandaudiogainandcableEQadjustments• Supports2channelsoflocallyembeddedaudio• 10/100Base-Tnetworkinterface• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof
equipment and link• FullVBIsupport• 4:2:0supportwithtransportstreamsofupto10Mbps• I,B,B,PGOPfor4:2:0profile.SimpleGOPstructureconfiguration
through element management gui**• ACandDCpoweroptionswithoptionalredundancy•CompatiblewithSMPTE2022,FECincluded•CompatiblewithFCS183-AEMSAdvancedElementManagementSystem
* Scheduled availability Q3 2008** Planned versions for future release
converters and embedders 1.1
VeNTura
VS905-ME-CO-FE*MPEG Encoder/Network Interface
22
**
**
40 | network-electronics.com
converters and embedders
VeNTura
1.1
mPEg 2 EncoderNtSC/PaL/SdI + audio to aSI/dS3/100Baset Network Interfaces
tv-C PLuS-ENC
•NTSC/PALcompositeorSDIinputsandoutputs• EightindependentchannelsofanalogaudioorfourAES/EBU• VideoandaudiogainandcableEQadjustatallanalogI/Os• Supportspre-embeddedorlocallyembeddedaudio•DVB-ASI,DS3and10/100Base-Tinterfaces• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof
equipment and link• FullVBIsupport• 4:2:2PatMLwithtransportstreamofupto50Mbps• 4:2:0supportwithtransportstreamsofupto25Mbps• SimpleGOPstructureconfigurationthroughelementmanagementGUI• Intuitivefrontpanel,easy-to-navigateLCDmenuwithpushbutton
controls• ACandDCpoweroptionswithoptionalredundancy
network-electronics.com | 41
converters and embedders 1.1
VeNTura
OPERatIONThe TV-c PluS MPeg-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSc/Pal and analog audio and SDi and aeS are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-c PluS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at Ml and 4:2:2 P at Ml support. ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. also, by providing aSi, ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.
COmPRESSION/dE-COmPRESSIONViDeoFormat MPeg-2 (iSO/iec 13 818-2)
Profile 422P at Ml or MP at Ml
gOP adjustable
bit rate From 1,5Mbps to 50Mbps
Delay <140ms
auDioFormat MPeg-1 layer ii (iSO/iec 11172-3)
Mode Stereo, Joint Stereo, Mono, Dual Monobit rate From 64 to 384Kbps
ENCOdER INPutS – vIdEO anaLoGSystem specifications Pal/NTSc (iTu r-bT 470.rS250-c)
Number of inputs 1
impedance 75 ohm
Nominal level 1Vpp
bandwidth >5MHz
S/N lum Wt. >68db (Profile dependent)
cable eq >100m
DiGitaL Format SDi 4:2:2 (625/625) (iTu-r 656)
cable eq >250m belden 8281
otherVertical blanking interval (Vbi) transport is fully supported by stripping the Vbi lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.
an SDi pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process.
ENCOdER INPutS – audIO anaLoGNumber of inputs up to 8 independent channels
connector type Phoenix 3-pin
impedance 600 ohm or Hi-Z
S/N (TX to rX) > 80db rms, > 62db
DiGitaL System specification aeS-3
connector type Three, Phoenix
impedance 110 ohm, balanced
Sample frequency 32, 44.1, 48Khz
otheraudio may also be carried pre-embedded in the SDi stream. if configured to do so, this audio will be de-embedded and processed by the encoder. an on-board tone generator is also present that can be enabled for link and audio processing verification.
NEtWORk INtERFaCES ENCOdER/dECOdERFormatSaSi eN 50083-9
e3 g.751
DS-3 g.751, c-bit Parity or M-Frame*
10/100baseT uDP/rTP, unicast and Multicast
maNagEmENt aNd CONtROLboth encoder and decoder can be configured via front panel push buttons and lcD display. The main status, control and alarm interfaces are through an rS-232 port and an rJ-45 10 baseT port on the rear panel of each unit.
PHySICaL aNd ENvIRONmENtaLThe TV-c PluS is fitted with both ac plus Dc power supplies. redundancy is enhanced through unique cross coupling of Dc inputs and outputs when two or more units are present.
Power consumption <25 Watts per unit
Operating temp 0 ˚c to 50 ˚c ambient
Storage temp –40 ˚c to +85 ˚c
relative humidity 5% to 85%
aGency compLiance Safety ul, cSa, ce low Voltage DirectiveeMc Fcc Part 15 class a, ce eMc Directive
ORdERINg INFORmatIONVPg TV-c PluS – eNc encoder
tv-C PLuS-ENC
42 | network-electronics.com
converters and embedders
VeNTura
1.1
mPEg 2 decoder NtSC/PaL/SdI + audio to aSI/dS3/100Baset Network Interfaces
tv-C PLuS-dEC
•NTSC/PALCompositeorSDIinputsandoutputs• EightindependentchannelsofAnalogaudioorfourAES/EBU• VideoandaudiogainandcableeqadjustatallanalogI/O’s• Pre-embeddedorlocallyembeddedaudiosupported•DVB-ASI,DS3and10/100Base-Tinterfaces• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof
equipment and link • FullVBIsupport• 4:2:2PatMLwithtransportstreamofupto50Mbps• 4:2:0supportwithtransportstreamsofupto25Mbps• Simple,GOPstructureconfigurationthroughelementmanagementGUI• IntuitivefrontpaneleasytonavigateLCDmenuwithpushbuttoncontrols• Simplefront-paneldisplay/menu/selection• ACandDCpoweroptionswithoptionalredundancy
network-electronics.com | 43
converters and embedders 1.1
VeNTura
OPERatIONThe TV-c PluS MPeg-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSc/Pal and analog audio and SDi and aeS are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-c PluS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at Ml and 4:2:2 P at Ml support. ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. also, by providing aSi, ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.
COmPRESSION/dE-COmPRESSIONViDeoFormat MPeg-2 (iSO/iec 13 818-2)
Profile 422P at Ml or MP at Ml
gOP adjustable
bit rate From 1.5Mbps to 50Mbps
Delay <140ms
auDioFormat MPeg-1 layer ii (iSO/iec 11172-3)
Mode Stereo, Joint Stereo, Mono, Dual Monobit rate From 64 to 384Kbps
dECOdER OutPutS-vIdEO anaLoG System specifications Pal/NTSc (iTu r-bT 470.rS250-c)
Number of inputs 1
impedance 75 ohm
Nominal level 1Vpp
bandwidth >5MHz
S/N lum Wt. >68db (Profile dependent)
cable eq >100m
DiGitaL Format SDi 4:2:2 (625/625) (iTu-r 656)
dECOdE OutPutS – audIO anaLoGNumber of outputs up to 8 independent channels
connector type Phoenix 3-piin
impedance 600 ohm or lo-Z
S/N (TX to rX) > 80db rms, > 62db
DiGitaL System specification aeS-3
connector type Three, Phoenix
impedance 110 ohm, balanced
Sample frequency 32, 44.1, 48Khz
NEtWORk INtERFaCES ENCOdER/dECOdERFormatSaSi eN 50083-9
e3 g.751
DS-3 g.751, c-bit Parity or M-Frame*10/100baseT uDP/rTP, unicast and Multicast
maNagEmENt aNd CONtROLboth encoder and decoder can be configured via front panel push buttons and lcD display. The main status, control and alarm interfaces are through an rS-232 port and an rJ-45 10 baseT port on the rear panel of each unit.
PHySICaL aNd ENvIRONmENtaLThe TV-c PluS is fitted with both ac plus Dc power supplies. redundancy is enhanced through unique cross coupling of Dc inputs and outputs when two or more units are present.
Power consumption <25 Watts per unit
Operating temp 0 ˚c to 50 ˚c ambient
Storage temp –40 ˚c to + 85 ˚c
relative humidity 5% to 85%
aGency compLiance Safety ul, cSa, ce low Voltage DirectiveeMc Fcc Part 15 class a, ce eMc Directive
ORdERINg INFORmatIONVPg TV-c PluS – Dec Decoder
tv-C PLuS-dEC
44 | network-electronics.com
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) 19.392Mbps (SMPTe-310M) DVb-aSi (eN50083-9)
# of inputs 1 (VS201-eO)
# of Outputs 2 (VS201-Oe)
connector bNc
impedance 75 ohm
Data rate up to 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSVS201-eo VS201-oelaser failure loss of video loss of video loss of input Mute (laser disabled) bypass Dc power Dc power
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of input loss of video (VS201-Oe) laser transmitter failure (VS201-eO)
Status Transmitter enabled/disabled (VS201-eO) SFP transmitter wavelength (VS201-eO) SFP transmitter output power (VS201-eO) SFP receiver input power (VS201-eO) Data rate (VS201-Oe) bypass enabled/disabled (VS201-Oe) Model and serial number
controls laser transmitter enable/disable (VS201-eO)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V
Power consumption 3W typical
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%
compliance NebS level 3, ul, cSa, ce, Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS201-eO Transmitter card-SDi/aSi e/O
VS201-Oe receiver card-SDi/aSi O/e with SFP-rV-PiN receiver card installed
SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, Non-cWDM FP
SFP-TV-1550-SD Video 270/1500Mbps, TX, Non-cWDM DFb
SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM
SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM
SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM
SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM
SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM
SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM
SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM
SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM
SdI/aSI/310m Fiber Optic transport
vS201
Single channel Fiber
VeNTura
1.1
• SDI,SDTI,ATSCandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofvideo,lossofinput,laserfailureandDCpowerLEDs• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 45
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
# of Outputs 2
connector bNc
impedance 75 ohm
Data rate up to 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSVS231-eo VS231-oelaser failure loss of video loss of video loss of input eDH errors detected eDH errors detected SDi video present SDi video present
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 6W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of input loss of video Video errors laser transmitter failure (VS231-eO) Optical low light (VS231-Oe) VS231-eO uplink transmitter alarms (VS231-Oe)
Status DVb-aSi detected SDi detected Default SDi output enabled/disabled incoming embedded audio detected VS231-eO uplink transmitter status (VS231-Oe) SFP wavelength SFP output power SFP receiver input power Model and serial number
controls iD setting for the VS231 (0-65535) Force to aSi mode enable/disable Default pattern laser transmitter enable/disable (VS231-eO) Optical/electrical receiver input mode (VS231-Oe)
ORdERINg OPtIONSVS231-eO Transmitter card
VS231-Oe PiNFeT receiver
SFp optionSSFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c SFP-TV-1610-c SFP-rV-PiN
Single channel Fiber 1.1
VeNTura
SdI/aSI 270mbps Fiber Optic transport with Jitter management
vS231
• SDI,SDTIandDVB-ASIcompatiblewithautomaticinput signal detection
• RemovestimingandalignmentjitterfromtheSDIsignal• Toleratesmultiplecascadesthroughafacility• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•DefaultSDIkeep-alivesignal• Lossofvideo,EDH,SDIvideopresent,lossofinputLEDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
46 | network-electronics.com
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
# of Outputs 2
connector bNc
impedance 75 ohm
Data rate up to 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSlaser failure loss of video loss of input eDH errors detected SDi video present
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of input loss of video Video errors laser transmitter failure Optical low light uplink transmitter alarms
Status DVb-aSi detected SDi detected Default SDi output enabled/disabled SFP transmitter wavelength SFP transmitter output power SFP receiver input power incoming embedded audio detected uplink transmitter status Model and serial number
controls Force to aSi mode enable/disable laser transmitter enable/disable Optical/electrical receiver input mode
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 6W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS231-OO Optical regenerator
SdI/aSI 270mbps Fiber Optic Regenerator with Jitter management
vS231-OO
Single channel Fiber
VeNTura
1.1
• SDI,SDTIandDVB-ASIcompatiblewithautomaticinputsignaldetection• RemovestimingandalignmentjitterfromtheSDIsignal• Toleratesmultiplecascadesthroughafacility• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•DefaultSDIkeep-alivesignal• Lossofvideo,EDH,SDIvideopresent,lossofinputLEDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 47
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
# of Outputs 2
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
dIgItaL audIOStandards aeS/ebu (SMPTe-272M)
# of inputs 2 (VS501-eO)
# of Outputs 2 (VS501-Oe)
connector bNc (unbalanced) 3-pin terminal (balanced)
Note: see VS312 data sheet for more detailed specifications
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4(VS501-eO)
# of Outputs 4 (VS501-Oe)
connector 3-pin terminal
Note: see VS312 data sheet for more detailed specifications
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSVS501-eO VS501-OeNote: same as the VS312
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Note: same as the VS312 plus the following:
alarms laser transmitter failure (VS501-eO) Optical low light (VS501-Oe) VS501-eO uplink transmitter alarms (VS501-Oe)
Status VS501-eO uplink transmitter status (VS501-Oe) Model and serial number laser wavelength laser power SFP receiver installed Optical receiver installed
controls laser transmitter enable/disable (VS501-eO) electrical/optical receiver input mode (VS501-Oe) SDi pattern enable iD setting for the VS501 (0-65535)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W typical
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS501-eO Transmitter card
VS501-Oe PiNFeT receiver
SFp optionSSFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c SFP-TV-1610-c SFP-rV-PiN
Single channel Fiber 1.1
VeNTura
SdI/aSI 270mbps audio Embedder/de-Embedder and Fiber Optic transport
vS501
• SDI,SDTIandDVB-ASIcompatible• RemovestimingandalignmentjitterfromtheSDIsignal• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest• EmbedsuptofourchannelsofanalogaudioortwochannelsofAESdigital
audio, or mix of both• Asynchronousorsynchronous48Khzaudiowith20-bitaudioresolution•DefaultSDIkeep-alivesignal• AESaudiopresent,analogaudiopresent,SDIvideopresent,ASIvideo
present, laser fail, Dc power, eDH, loss of input and loss of audio leDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet VS501-EO
AnalogAudio
DigitalAudio
CH1 (L1)
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
CH2 (R1)
CH3 (L2)
CH4 (R2)
AES1
AES2
270Mbps 270Mbps
PIN Rcv’r
270Mbps
270Mbps
1310/1550/CWDMVS501-OE
AnalogAudio
DigitalAudio
CH1 (L1)
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
CH2 (R1)
CH3 (L2)
CH4 (R2)
AES1
AES2
270Mbps
270MbpsNetwork
48 | network-electronics.com
Composite analog video and audio to SdtI 270mbps w/Fiber Optic transport
vS551
Single channel Fiber
VeNTura
1.1
•ConvertsNTSC/PALanalogvideotoSDTIfortransportovera270Mbpsnetwork
• Embedsuptofourchannelsofanalogaudio• 12-bitvideoquantization,20-bitaudioquantization•Unintrusiveaudiomonitoringandleveladjustment•Compositetestpatterngenerator• Lossofinput,lossofvideo,EDH,lossofaudioLEDs•Optical(optional)andelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS551-ADC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
270Mbps
SDTI(SMPTE-305M)
1310/1550/CWDM
VS551-DAC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
270Mbps
SDTI(SMPTE-305M)
270MbpsNetwork
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1 (VS551-aDc)
# of Outputs 1 (VS551-Dac)
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential Phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M)
# of inputs 1 (VS551-Dac)
# of Outputs 1 (VS551-aDc)
connector bNc
impedance 75 ohm
Data rate up to 270Mbpsequalization up to 300m w/belden 8281
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4 (VS551-aDc)
# of Outputs 4 (VS551-Dac)
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted -90dbFS
Frequency response 0.5db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0dbFS)
iMD <0.05% SMPTe @ +2dbu
crosstalk between ch. 95dbinput/Output level 0dbFS = +24dbu (Hi-Z)
0dbFS = +18dbu (600 ohm)
OPtICaL tRaNSmIttER (OPtIONaL)# of Outputs 1
connector Sc/Pc
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm min (1310 and 1550) -0.5dbm min (cWDM)
Fiber Type Single mode
OPtICaL RECEIvER (OPtIONaL)# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSVS551-aDc VS551-Dacloss of audio for each ch. loss of audio for each channel
loss of video (ViD) loss of video (ViD)
eDH eDH
Dc power loss of input (lOi)
loss of frame (lOF)
Dc power
ELEmENt maNagEmENt
compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.alarms loss of audio 1-4
loss of video Status SFP present SFP transmitter wavelength SFP power level controls laser transmitter enable/disable
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS551-aDc-SFP analog to digital converter w/audio
embedder (SFP cage included)
SFp SoLD SeparateLy
SFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c
SFP-TV-1610-c
VS551-Dac-SFP Digital to analog converter w/audio de-embedder (SFP cage included)
SFp SoLD SeparateLySFP-rV-PiN
network-electronics.com | 49
Single channel Fiber 1.1
VeNTura
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M), SDi (SMPTe-259M),
HD-SDi (SMPTe-292M), DVb-aSi (eN50083-9), aTSc (SMPTe-310M)
# of inputs 1
# of outputs 2 electrical, 1 optical
Monitors 1 front panel
connector bNc
impedance 75 ohm
Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps
equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281
Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted -90 dbFS
Frequency response 0.5 db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0 dbFS)
iMD <0.05% SMPTe @ +2 dbu
crosstalk between channels 95 dbinput/output level 0 dbFS = +24dbu (Hi-Z)
0 dbFS = +18dbu (600 ohms)
dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)
aeS balanced (aeS3-1992) Dolby e
# of inputs 2 rear balanced or unbalanced
connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm
Signal level unbalanced 1.2 Vp-p balanced 1 to 7 Vp-p
resolution Supports up to 24 bitsSample rates 32kHz, 44kHz, 48kHz sample rates converted
to 48kHz
OPtICaL tRaNSmIttER# of outputs 1
connector Sc/Pc
laser type SFP
laser wavelengths 1310nm, 1550nm, cWDM, DWDM
Output power level -0.5dbm min (1310 & 1550) -0.5dbm min (cWDM)
Fiber type Single mode
LEd INdICatORSVideo mode HD/SD/aSi loss of input crc/eDH for HD/SD audio mode analog/aeSloss of audio analog 1, 2, 3, 4
aeS 1, 2
ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating temperature 0 ˚c to 50˚c chassis ambientStorage temperature –40 ˚c to 85 ˚c ambient
ORdERINg OPtIONSVS551-D-aDc-SFP analog to digital converter with audio
embedder (SFP cage included, SFP sold separately)
For optical interface options, see Ventura SFP index data sheet.
transmitter – universal analog & digital video/audio adapter for Fiber Optic transport
vS551-d-adC-SFP
• Automaticallydetectsvideoinputformat•ConvertsNTSC/PAL/PAL-MVideoandATSC,SD-SDI,HD-SDIandDVB-ASI
inputs to SDTi/SDi and optical output for transport over 270Mbps network•Handles525/625SD-SDIand1.4835/1.485GbpsHD-SDI•Compositetestpatterngenerator•ConvertsuptofourchannelsofanalogaudiotoAES•DolbyE–compatible•Non-intrusiveaudiomonitoringandleveladjustment• EmbedsAESconvertedfromanalogaudioordirect-fedAESintoSDTI,
SD-SDi or HD-SDi•WarningLEDsforlossofvideo,lossofaudio,CRC/EDH• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550,andany
iTu cWDM or DWDM wavelength• EngineeredtomeetNEBSLevel3requirements•CompatiblewithFCS183AEMSandEMSelementmanagers
50 | network-electronics.com
Single channel Fiber
VeNTura
1.1
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of outputs 2
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M)
SDi (SMPTe-259M) HD-SDi (SMPTe-292M) DVb-aSi (eN50083-9) aTSc (SMPTe-310M)
# of inputs 1 optical (see optical spec), 1 electrical
# of outputs 2
Monitors 1 front panel
connector bNc
impedance 75 ohm
Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps
equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281
Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard
aNaLOg audIOStandards exceeds rS250c short haul specs
# of outputs 4
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48KHz
Quantization 20-bit
SNr unweighted -90dbFS
Frequency response 0.5db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, at 0dbFS)
iMD <0.05% SMPTe at +2 dbu
crosstalk between channels 95dbinput/output level 0dbFS = +24dbu (Hi-Z)
0dbFS = +18dbu (600 ohms)
dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)
aeS balanced (aeS3-1992) Dolby e
# of inputs 2 rear balanced or unbalanced
connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm, unbalanced
Signal level unbalanced 1.2Vp-p balanced 1 to 7Vp-p
resolution Supports up to 24 bits
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver type SFP - aPD
input wavelengths 1260nm - 1620nm
Sensitivity ≤-34dbm
Max input power –8dbm (+7dbm with 15db attenuator)Fiber type Single mode
LEd INdICatORSVideo Mode HD/SD/aSi
loss of input (local and remote)
crc/eDH for HD/SD
audio mode analog/aeSloss of audio analog 1, 2, 3, 4
aeS 1, 2 (local and remote)
ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambientStorage Temperature –40 ˚c to 85 ˚c ambient
ORdERINg OPtIONSVS551-D-Dac-SFP universal analog and digital video and audio
fiber receiver
Receiver – universal analog and digital video and audio adapter for Fiber Optic transport
vS551-d-daC-SFP
• ReceivesallSD-SDI,HD-SDI,ASIandATSCopticallyandelectrically•De-embedsfourchannelsofaudiofromSD-SDIandHD-SDIandprovides
aeS and analog outputs •DolbyE–compatible•ConvertsSDTItoNTSC/PAL/PAL-M•Non-intrusiveanalogaudiomonitoringandleveladjustment• Lossofinput,lossofvideo,EDH/CRC,lossofaudioLEDs• RemotelossofvideoandlossofaudioLEDs• SmallFormfactorPluggable(SFP)opticswithAPDreceiverforoptimum
sensitivity• EngineeredtomeetNEBSLevel3requirements•CompatiblewiththeFCS183comprehensiveelementmanagementsystem
that provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 51
VS591 Transposer Block Diagram
dIgItaL vIdEOStandards iTu recommendations
g.703 for e4 physical interface g.751 for e4 framing g.823 for jitter performance
electrical inputs 1 per channel
electrical outputs 2 (e4, reclocked and ac coupled) per channel
Monitors 1 front panel bNc
connectors bNcs on rear connector panel
impedance 75 Ohm
Data rate 139.264Mbps (278.528 M band)equalization better than 250m at 140Mbps for belden
8281
OPtICaL tRaNSmIttER# of outputs 1 per channel
connector Sc/Pc
Data rate 139.264Mbps
laser type SFP
laser wavelengths 1310nm, 1550nm, cWDM, DWDM
Output power level –1dbm minFiber type Single mode
OPtICaL RECEIvER# of inputs 1 per channel
connector Sc/Pc
receiver type PiN
input wavelengths 1260nm - 1620nm
Sensitivity ≤–32dbmFiber type Single mode
LEd INdICatORSDc powerloss of inputValid e4 presentchannel presentlaser failure crc errors/aiS detected
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of optical input loss of video e4 errors detected
Status Model and serial number Transmitter power level SFP laser transmitter wavelength SFP receiver installed receiver power level
controls laser transmitter enable/disable Pattern generator enable (PrbS with crc check)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Power consumption 7W
Operating temperature 0 ˚c to 50 ˚c chassis ambient
Storage temperature –40 ˚c to 85 ˚c ambient
relative humidity 5% to 85%
compliance NebS level 3, ul, cSa, ce, Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS591-SFP-SFP Dual e4 transposer and protection switch
SFp optionSSFP-TrV-1310-S 1310nm laser with PiN receiver
SFP-TrV-1550-S 1550nm laser with PiN receiver
SFP-TrV-1470-c 1470nm cWDM laser with PiN receiver
SFP-TrV-1490-c 1490nm cWDM laser with PiN receiver
SFP-TrV-1510-c 1510nm cWDM laser with PiN receiver
SFP-TrV-1530-c 1530nm cWDM laser with PiN receiver
SFP-TrV-1550-c 1550nm cWDM laser with PiN receiver
SFP-TrV-1570-c 1570nm cWDM laser with PiN receiver
SFP-TrV-1590-c 1590nm cWDM laser with PiN receiver
SFP-TrV-1610-c 1610nm cWDM laser with PiN receiver
SFP-rV-PiN PiN receiver
dual E4 transposer
vS591-SFP-SFP
•Configurablesystemforregenerating,transposingandtransportingE4signals
•DesignedtotransportE4139.264MbpsCMIencodedsignals•MeetsITU-TrecommendationsforE4• Twoindependentchannelspercard• RemovestimingandalignmentjitterfromtheSDIsignalsattheoutput• JittermaskusesITU-TrecommendationsG.823• Lossofvideo,lossofopticalinput,laserfailureLEDs• Automaticcableequalizationbetterthan250mforBelden8281• Selectabletestpatterngeneratorforeachchannel• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany
iTu cWDM or DWDM wavelengths•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
Single channel Fiber 1.1
VeNTura
52 | network-electronics.com
gENERaLinput signal types NTSc, wideband 12 MHz analog passband
No. of channels/chassis 10
Wideband mode spec. NaSa: 79K33043 Specification of Wideband Fiber Optic Terminal equipment
Video mode specifications rS-250c Short Haul (video mode)Framing SMPTe 305M / SMPTe 259M
vS621-adC INPut INtERFaCEinput levels 1 Vpp*, nominal ± 3db (adjustable)
input impedance 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable)
return loss >40db, 0–5 MHz >30db, 0–10 MHz
common mode rejection >70db at 60Hz
cable equalizer max 130m, up to 12MHz (belden 8281)
equalization frequency
response error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000TX
vS621-daC OutPut INtERFaCEOutput levels 1 Vpp*, nominal ± 3db (adjustable)
output impeDancerear panel Dual 75 ohm* unbalanced or 124 ohm
balanced (user-selectable)Front panel 75 ohm unbalanced, flat, pre-equalized
monitor port
return loss >40db, 0–5 MHz
Module-to-Module isolation >60db, 0–5 MHz
cable equalizer max. ith 130m, up to 12MHzequalization frequencyresponse error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000rX
OPtICaL INtERFaCE PaRamEtERS# of Outputs 1 (VS621-aDc)
# of inputs 1 (VS621-Dac)
connector Sc/Pc
laser Type SFP
laser Wavelength 1310nm, 1550nm, cWDM, DWDM (please contact us for DWDM optics)
Output Power level–aDc -0.5dbm min
Sensitivity–Dac -34dbmFiber Type Single mode
SyStEm FREquENCy RESPONSEVideo Mode ± 0.15db, 10Hz–5MHzanalog/Digital Mode ± 0.35db, 10Hz–8MHz
± 0/-3db, 8MHz–12MHz
SdI ELECtRICaL INtERFaCE PaRamEtERSPhysical interface SMPTe 259M
Format SMPTe 305M
coax Drive up to 300m (belden 8281)cable eQ up to 300m (belden 8281)
gENERaL vIdEO PERFORmaNCE SPECIFICatIONSgain inequality ± 1 ire
Delay inequality ± 10ns
intermodulation <1% for 50% aPl
chroma non-linear gain distortion <0.5% for 50% aPl
chroma non-linear phase distortion <0.5° for 50% aPl
luminance non-linearity <2%
Differential gain <1%
Differential Phase <0.5°
Transient non-linearity <1%
Dynamic gain of Picture Signal <1%
Signal to low Frequency Noise pp >53db
luminance Signal-to-weighted rMS Noise >68db
Signal-to-Periodic Noise >67dbSignal-to-impulse Noise >65db
aNaLOg/data SIgNaL dIStORtIONSTotal harmonic distortion >40db below 1 Vpp sinewave
Signal-to-noise ratio >50db at -27dbm receiver optical power, 1 Vpp signal to 12MHz band-limited noise
Peak-to-peak jitter <5% up to 4Mbps, tested with 1 Vpp NrZ signal and 215 -1 pseudo-random bit sequence
Overshoot <10%bit error rate <1 x 10-9, 1kbps to 4Mbps
PHySICaL aNd ENvIRONmENtaLTemperature range 0-50 °c ambientPower requirements <7W
ORdERINg OPtIONSVS621-PcO5000TX analog to digital
VS621-PcO5000rX Digital to analog
VS621-3V-PcO5000TX analog to digital (3Vpp/50 ohm)
VS621-3V-PcO5000rX Digital to analog (3Vpp/50 ohm)
analog to SdtI video/data Converter
vS621
Single channel Fiber
VeNTura
1.1
• EmulatesthefunctionsofthePCO5000fiberlink• Accommodatesbothvideoanddatainputs•Convertscompositevideosignalorwideband12MHzanalogbandwidth
into a SMPTe 305M SDTi stream•Morethan30dBopticallinkbudget;lownoise,highlinearityconversion• LEDindicatorsandexternalalarmcontactsforvideo,dataandoptics• Balancedandunbalancedinputsandoutputs• Frontpanelbufferedmonitoroutputs• Frontpanellevel(orgain)andcableequalizationadjustments• 3Vpp/50ohmversionavailable•NEBSLevel3compliant• SFPopticssupportingallstandardandCWDMapplications
network-electronics.com | 53
Single channel Fiber 1.1
VeNTura
Composite analog audio and video to Component SdI 270mbps Converter w/Fiber Optic transport
vS661
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1 (VS661-aDc)
# of outputs 2 (VS661-Dac)
Monitors 1 (VS661-aDc)
connector bNc
impedance 75 Ohm
Quantization 10-bit
equalization up to 150m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDi (SMPTe-259M)
# of inputs 1 (VS661-Dac)
# of outputs 2 (VS661-aDc)
connector bNc
impedance 75 Ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4 (VS661-aDc)
# of outputs 4 (VS661-Dac)
connector 3-pin terminal
impedance Hi-Z or 600 Ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted –90 dbFS
Frequency response 0.5 db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0 dbFS)
iMD <0.05% SMPTe @ +2 dbu
crosstalk between channels 95 dbinput/output level 0 dbFS = +24dbu (Hi-Z)
0 dbFS = +18dbu (600 Ohm)
OPtICaL CHaRaCtERIStICS# of Outputs 1 (VS661-aDc)
# of inputs 1 (VS661-Dac)
connector Sc/Pc
laser type SFP
laser wavelength 1310nm, 1550 nm, cWDM, DWDM (please contact us for DWDM optics)
Output power level – aDc -0.5 dbm min
Sensitivity - Dac -34dbm
Fiber type Single mode
LEd INdICatORS
VS661 – aDcMinor alarm (MiN) leD (red) loss of composite video input, loss
of SDi video output, or loss of audio
Major alarm (MaJ) leD (red) board failure or communication failure
input present (ViD) leD (green) composite video input present
Power OK (Dc) leD (green) power supply ok
audio channel 1 (auD1) leD (yellow) ON with alarm, normally OFF
audio channel 2 (auD2) leD (yellow) ON with alarm, normally OFF
audio channel 3 (auD3) leD (yellow) ON with alarm, normally OFF
audio channel 4 (auD4) leD (yellow) ON with alarm, normally OFF
VS661 – Dacinput present (SDi) leD (red) SDi video present
audio group (auD) leD (yellow) audio group present
Power (+5V) leD (green) +5V Dc power present
alarm (alM) leD (yellow) flashes with alarm, normally OFF
Set-up and alignment 10 character alphanumeric display
ELEmENt maNagEmENtcompatible with FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W max
Operating temperature 0 ˚c to 50 ˚c chassis ambient
Storage temperature –40 ˚c to 85 ˚c ambient
relative humidity 5% to 85%
compliance NebS level 3, ul, cSa, ce, Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS661-aDc composite analog audio and video to
component SDi digital converter
VS661-Dac component SDi digital to composite analog audio and video converter. SFP optics sold separately
• Embedsuptofourchannelsofanalogaudio• 20-bitaudioquantization• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•MeetsUStelcoTV-1servicespecifications(GR-338-CORE)• ExceedsRS250Cshorthaulspecifications• Proprietaryselectablecomb/bandsplitfilteringfortopqualitydynamic
performance• Automaticcableequalizationupto300mforBelden8281• Frontpanelmonitorandcalibrationadjustments•User-definablealarmsbasedonpriority• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany
iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
VS661-ADC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
SDI270MbpsNetwork
VS661-DAC
AnalogAudio
Analog Video(NTSC/PAL)
CH1 (L1)
CH2 (R1)
CH3 (L2)
CH4 (R2)
SDI
54 | network-electronics.com
dIgItaL vIdEOStandards HDSDi (SMPTe-292M)
SDi (SMPTe-259M) SDTi (SMPTe-305M) 19.392Mbps (SMPTe-310M) DVb-aSi (eN50083-9)
# of inputs 1 (VS251-eO)
# of Outputs 2 (VS251-Oe)
connector bNc
impedance 75 ohm
Data rate up to 1.485 gbpsequalization up to 120m w/belden 1694
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
laser Type Video SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type aPD Pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤–32dbm
Max input Power –8dbmFiber Type Single mode
LEd INdICatORSVS251-eo VS251-oelaser failure loss of video loss of video loss of input Mute (laser disabled) bypass Dc power Dc power
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of input loss of video (VS251-Oe) laser transmitter failure (VS251-eO)
Status Transmitter enabled/disabled (VS251-eO) SFP transmitter wavelength (VS251-eO) Data rate (VS251-Oe) bypass enabled/disabled (VS251-Oe) SFP transmitter panel level SFP receiver panel Model and serial number
controls laser transmitter enable/disable (VS251-eO)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +5V,
Power consumption 3W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS251-1310-eO 1310nm laser
VS251-1550-eO-S 1550nm laser
VS251-1470-eO-c 1470nm cWDM laser
VS251-1490-eO-c 1490nm cWDM laser
VS251-1510-eO-c 1510nm cWDM laser
VS251-1530-eO-c 1530nm cWDM laser
VS251-1550-eO-c 1550nm cWDM laser
VS251-1570-eO-c 1570nm cWDM laser
VS251-1590-eO-c 1590nm cWDM laser
VS251-1610-eO-c 1610nm cWDM laser
VS251-Oe aPD receiver
Hd-SdI, SdI, SdtI, atSC and aSI Fiber Optic transport
vS251
High Definition
VeNTura
1.1
•HD-SDI,SDI,SDTI,ATSCandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofinput,lossofvideo,laserfailureandDCpowerLEDs• Externalmajorandminorrelaycontactclosurealarms• Automaticcableequalizationupto120mwithBelden1694• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
network-electronics.com | 55
OPERatION This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater. The unique design provides full jitter management of all HD/SD rates. 1310/1550nm wavelengths as well as the sixteen cWDM wavelengths are supported using a comprehensive range of VPg-provided SFP optical modules. SFP DWDM is supported by enabling additional scrambling that allows SMPTe pathological patterns to pass error-free through all DWDM network elements. element management provides detailed analysis of signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support. control of all card functions is available through element management or on-board switches. The card is ideal for difficult telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class long-reach optics and jitter management techniques unique to VPg equipment designs.
vIdEO INPutS Standards HD-SDi SMPTe 292M
SDi SMPTe 259M SDTi SMPTe 305M aTSc SMPTe 310M DVb-aSi eN50083-9
JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.
Standard Measurement
SD/aSi SMPTe rP184 SMPTe rP192/eg33HD SMPTe rP184 SMPTe rP192
ELECtRICaL INPutNumber of inputs 1
connector Type 75 ohm bNc
return loss >15db at 1.5gbpsequalization >150m of belden 1694 at 1.5gbps
ELECtRICaL OutPutSNumber of Outputs 2 Jitter managedconnector Type 75 ohm bNc
OPtICaL INPutNumber of inputs 1
connector Type Sc/Pc
Wavelength range 1270 – 1610nm
Sensitivity level –32dbm (worst case)Overload level –8dbm (worst case)
OPtICaL OutPutNumber of Outputs 1
connector Type Sc/Pc
Wavelengths 1310/1550nm, cWDM DWDM with lSb scrambling
Power Out 0dbm min, +1dbm typical
FRONt PaNEL LEd INdICatORSThere is a row of nine leDs comprehensively signaling the status and alarm conditions of the card. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms. each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.
ELEmENt maNagEmENt The VS251-SFP is compatible with the standard FcS183 and the FcS183-aeMS advanced element Management System. both management systems are Web browser and SNMP enabled. The FcS183 provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.
PHySICaL aNd ENvIRONmENtaLrequires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.
Power consumption <7W
Operating Temp 0 ˚c to 50 ˚c ambient
Storage Temp –40 ˚c to 85 ˚c
relative Humidity 5% to 85%
aGency compLiance Telco NebS level 3 Safety ul, cSa, ce low voltage directiveeMc Fcc Part 15 class a, ce eMc directive
ORdERINg INFORmatIONVS251-SFP (1310/1550nm and cWDM applications)
“SFP” represents locations for small form factor pluggable (SFP) optical devices.
use of one of the VPg SFP-TV or SFP-TrV family of high performance video SFPs covering 1310/1550nm and cWDM wavelengths with both PiN and aPD receiver options. Please see the VPg SFP Selection guide for further details.
SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the VPg SFP Selection guide for further details.
High Definition 1.1
VeNTura
Hd-SdI/SdI/SdtI/aSI/atSC Fiber Optic tX/RX/tRX
vS251-SFP
• 10Mbpsto1.5Gbpswithjittermanagedandnon-jittermanagedmodes• Jittermanagementat1.485GbpsHD,1.4835GbpsHDand270MbpsSDI/
SDTi/aSi, other rates supported in bypass mode• SFPopticalinterfacessupporting1310nm,1550nm,CWDMandDWDM•Minimumof32dBopticaldynamicrange• SFPopticsallowforoptimumsparing;cardisconfigurableasE-O,O-Eand
O-O repeater or wavelength shifter
• FullCRCandEDHcheckinginHD-SDIandSDImodes• BuiltinHD-SDItestsignalgeneratorforremotenetworktesting• TransportsallHDandSDpathologicalpatternswithout
additional scrambling at 1310/2550nm and cWDM • AdditionalscramblingforDWDMapplications• SNMPandWebbrowsersupportedunderVenturaAEMSmanagement•NEBSLevel3compliant
HD-SDI
SDI/ASIOpt RX
HD-SDI
SDI/ASICab EQ Jitter
BufferDriver
Driver Laser
Driver
EDH/CRCCount
EDH/CRCReset
LSB Dither
HD-SDI
Generator
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
OR
56 | network-electronics.com
Hd-SdI/SdI/SdtI/aSI/atSCdual Channel Fiber Optic tX/RX/tRX/Switch*
vS252-SFP-SFP
High Definition
VeNTura
1.1
The VS252 is a multifunction optical interface card in the High-Definition group of the Ventura™ product line. The card is dual-channel and supports TS bit rates from 10Mbps through 1.5gbps.
it can be operated in various modes providing optical transport, protection and monitoring of HD-SDi, SDi, aSi and SMPTe-310 video.
• 10Mbpsto1.5Gbpswithjittermanagementandnon-jittermanagementmodes
• Jittermanagementat1.485GbpsHD,1.4835GpbsHDand270MpbsSDI/SDTi/aSi
•Otherratessupportedinnon-jittermanagement(bypass)mode• SFPopticalinterfacessupporting1310nm,1550nm,CWDMandDWDM•Minimumof32dBopticaldynamicrange• SimplifiedsinglecardholdssparesconfigurableforE-O,O-EandO-O
repeater, wavelength shifter or switch* with any wavelength• FullCRCandEDHcheckinginHD-SDIandSDImodes• Built-inHD-SDItestsignalgeneratorforremotenetworktesting• TransportsallHDandSDpathologicalpatternswithoutadditional
scrambling at 1310/1550nm and cWDM• SNMPandWebbrowsersupportedunderVenturaAEMSelement
management•NEBSLevel3compliant
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
Opt RX
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
Cab EQ JitterBuffer
2x2Switch*
NMS
Driver
Driver Laser
Driver
EDH/CRCCount
EDH/CRCReset
LSB Dither
HD-SDI
Generator
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
OR
Opt RX
Cab EQJitterBuffer
EDH/CRCCount
EDH/CRCReset
LSB Dither
OR Driver
Driver
Driver Laser
network-electronics.com | 57
OPERatION This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater and/or wavelength shifter. With two fully independent channels the card can also operate as an HD/SD transceiver, a 2x2 changeover switch or an automatic HD/SD protection switch in either the electrical or optical domain.
The unique design provides full jitter management of all HD/SD rates. 1310/1550nm wavelengths as well as the sixteen cWDM wavelengths are supported using a comprehensive range of VPg provided SFP optical modules. SFP DWDM is supported scrambling that allows SMPTe pathological patterns to pass error-free through all DWDM network elements. element management provides detailed analysis of signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support.
control of all card functions is available through element management or through on-board switches. The card is ideal for different telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class long-reach optics and jitter management techniques unique to VPg equipment designs.
vIdEO INPutS Standards HD-SDi SMPTe 292M
SDi SMPTe 259M SDTi SMPTe 305M aTSc SMPTe 310M DVb-aSi eN50083-9
JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.
Standard Measurement
SD/aSi SMPTe rP184 SMPTe rP192/eg33HD SMPTe rP184 SMPTe rP192
ELECtRICaL INPut (EaCH CHaNNEL)Number of inputs 1
connector Type 75 ohm bNc
return loss >15db at 1.5gbpsequalization >150m of belden 1694 at 1.5gbps
ELECtRICaL OutPutS (EaCH CHaNNEL)Number of Outputs 2 Jitter managedconnector Type 75 ohm bNc
OPtICaL INPut (EaCH CHaNNEL)Number of inputs 1
connector Type Sc/Pc
Wavelength range 1270–1610nm
Sensitivity level -32dbm (worst case)Overload level –8dbm (worst case)
OPtICaL OutPut (EaCH CHaNNEL)Number of Outputs 1
connector Type Sc/Pc
Wavelengths 1310/1550nm, cWDM DWDM with lSb scrambling
Power Out 0dbm min, +1dbm typical
FRONt PaNEL LEd INdICatORSThere are two rows of nine leDs comprehensively signaling the status and alarm conditions of each channel. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms. each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.
ELEmENt maNagEmENt The VS252 is compatible with the standard FcS183 and the FcS183-aeMS (advanced element Management System). both NM systems are Web browser and SNMP enabled. The FcS183 provides the simplest Web interface with SNMP support limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.
PHySICaL aNd ENvIRONmENtaLrequires only one slot of either the VS103 ten-slot chassis or the VS101 three-slot chassis
Power consumption <10W
Operating Temp 0 ˚c to 50 ˚c ambient
Storage Temp –40 ˚c to 85 ˚c
relative Humidity 5% to 85%
aGency compLiance Telco NebS level 3 Safety ul, cSa, ce low Voltage directiveeMc Fcc Part 15 class a, ce eMc directive
ORdERINg INFORmatIONVS252-SFP-SFP (1310/1550nm and cWDM applications)
VS252-SFPD-SFPD (DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices.
The VS252 supports both standard and DWDM applications. However to use DWDM SFPs the VS252 must be ordered with a special adapter. This adapter may be field retrofitted or the VS252 can be returned to the factory for conversion to DWDM. consult factory for details.
SFP denotes use of one of the VPg SFP-TV or SFP-TrV family of high performance video SFPs covering 1310/1550nm and cWDM wavelengths with both PiN and aPD receiver options. Please see the SFP Selection guide for further details.
SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the SFP Selection guide for further details.
High Definition 1.1
VeNTura
vS252-SFP-SFP
58 | network-electronics.com
Hd-SdI 4xaES audio Embedder Hd-SdI/SdI/SdtI/aSI/atSC Fiber Optic transmitter
vS254-E-SFP
High Definition
VeNTura
1.1
The VS254-e-SFP is an HD-SDi audio embedder and optical transmit card in the VS25x group of High-Definition solutions. as well as embedding four aeS audio channels it also supports Dolby-e and any aeS framed data. The card can also be configured to transport bit rates from 10Mbps through 1.5gbps through its SFP fiber interfaces.
• EmbedsuptofourAES/EBUaudiochannels• TransparentlyhandlesanyAES-frameddata,suchasDolby-E• 10Mbpsto1.5Gbpswithjittermanagedandnon-jittermanagedmodes• Jittermanagementat1.485GbpsHD,1.4835GbpsHDand270MbpsSDI/
SDTi/aSi•Otherratessupportedinbypassmode• SFPopticalinterfacessupporting1310nm,1550nm,CWDMandDWDM•Minimumof0dBmopticallaunchpower• Simplifiedsinglecardspares-holding,configurableEOtoanywavelength
by simple SFP change• FullCRCandEDHcheckinginHD-SDIandSDImodes• Built-inHD-SDItestsignalgeneratorforremotenetworktesting• TransportsallHDandSDpathologicalpatternswithoutadditional
scrambling at 1310/1550nm and cWDM• SNMPandWebbrowsersupportunderVenturaAEMSmanagement•NEBSLevel3compliant
4xAES
Dolby-E/AC-3
AES RX
HD-SDI
SDI/ASICab EQ Jitter
Buffer
Sample RateConvertersand Bypass
Driver
Driver Laser
Driver
EDH/CRCCount
EDH/CRCReset
LSB Dither
HD-SDI
Generator
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
OR
network-electronics.com | 59
OPERatION This powerful HD/aeS processor embeds up to four synchronous or asynchronous aeS channels into an HD-SDi video signal. all popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Disabling the sample rate converters allows the transparent carriage of Dolby-e or any aeS-framed data. by adding an SFP, the card is readily transformed into a fiber optic network interface. configurable additional scrambling allowing can be enabled allowing SMPTe pathological patterns to pass error-free through all DWDM network elements. element management provides detailed analysis of video and audio signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support. control of all card functions is available through element management or through on-board switches.
vIdEO INPutS StanDarDSHD-SDi SMPTe 292M
1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94
SDi SMPTe 259M
SDTi SMPTe 305M
aTSc SMPTe 310MDVb-aSi eN50083-9
JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.
Practice Measurement
SD/aSi SMPTe rP184 SMPTe rP192/eg33HD SMPTe rP184 SMPTe rP192
ELECtRICaL INPutNumber of inputs 1
connector Type 75 ohm bNc
return loss >15db at 1.5gbpsequalization >150m of belden 1694 at 1.5gbps
ELECtRICaL OutPutSNumber of Outputs 2 Jitter managedconnector Type 75 ohm bNc
OPtICaL OutPutNumber of Outputs 1
connector Type Sc/Pc
Wavelengths 1310/1550nm, cWDM, DWDM with lSb scrambling
Power Out 0dbm min, +1dbm typical
audIO INPutSStandards SMPTe 299M (embedding)
aeS-3 (balanced and un-bal) Dolby-e
INPutSNumber of inputs 4
connector Type a 110 ohm, bal, 3-pin Phoenix
(a, b are Options) b 75 ohm, unbalanced
Sampling rage 48kHz
level a 1Vp-p +/- 10% b 0.5 to 10V p-p
FRONt PaNEL LEd INdICatORSa row of nine leDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms. each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.
ELEmENt maNagEmENt The VS254 is compatible with the standard FcS183 and the FcS183-aeMS (advanced element Management System). both management systems are Web browser and SNMP enabled. a built-in-test HD-SDi generator can be enabled and switched in remotely to fully test a link. The FcS183-aeMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.
PHySICaL aNd ENvIRONmENtaLrequires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.
Power consumption <10W
Operating Temp 0 ˚c to 50 ˚c ambient
Storage Temp –40 ˚c to + 85 ˚c
relative Humidity 5% to 85%
aGency compLiance Telco NebS level 3 Safety ul, cSa, ce low voltage directiveeMc Fcc Part 15 class a, ce eMc directive
ORdERINg INFORmatIONVS254-e-SFP (1310/1550nm and cWDM applications)
“SFP” represents locations for small form factor pluggable (SFP) optical devices.
The VS254 supports both standard and DWDM applications. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. consult factory for details.
SFP denotes use of one of the VPg SFP-TV family of high performance video SFPs covering 1310/1550nm and cWDM wavelengths. Please see the SFP Selection guide for further details.
High Definition 1.1
VeNTura
vS254-E-SFP
60 | network-electronics.com
Hd-SdI 4xaES audio de-embedder Hd-SdI/SdI/SdtI/aSI/atSC Fiber Optic Receiver
vS254-d-SFP
High Definition
VeNTura
1.1
The VS254-D-SFP is an HD-SDi audio de-embedder and optical receive card in the VS25x group of High-Definition solutions. as well as de-embedding four aeS audio channels it also supports Dolby-e and any aeS framed data. The card can also be configured to optically receive bit rates from 10Mbps through 1.5gbps through its SFP fiber interfaces.
•De-embedsuptofourAES/EBUaudiochannels• TransparentlyhandlesanyAES-frameddatasuchasDolby-E• 10Mbpsto1.5Gbpswithjittermanagedandnon-jittermanagedmodes• Jittermanagementat1.485GbpsHD,1.4835GbpsHDand270MbpsSDI/
SDTi/aSi•Otherratessupportedinre-clockerbypassmode• SFPPINandAPDopticalinterfacesavailable•Minimumof0dBmopticallaunchpower• Simplifiedsinglecardspares-holding,configurableEOPINorAPDby
simple SFP change• FullCRCandEDHcheckinginHD-SDIandSDImodes• Built-inHD-SDItestsignalgeneratorforself-test• ReceivesallHDandSDpathologicalpatternswithoutadditional
scrambling with both PiN and aPD options• SNMPandWebbrowsersupportunderVenturaAEMSmanagement•NEBSLevel3compliant
HD-SDI
SDI/ASIOpt RX
HD-SDI
SDI/ASICab EQ Jitter
BufferDriver
Driver
AES TX
EDH/CRCCount
EDH/CRCReset
DeEmbed Audio
LSB DitherHD-SDI
Generator
HD-SDI
SDI/ASI
HD-SDI
SDI/ASI
4xAES
Dolby-EAC-3
OR
network-electronics.com | 61
OPERatION This powerful HD/aeS processor de-embeds up to four aeS channels from an HD-SDi video signal. all popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Dolby-e or any aeS-framed data is also de-embedded. by adding an SFP the card is readily transformed into a fiber optic network interface. if additional scrambling has been enabled in the VS254-e to allow SMPTe pathological patterns to pass error-free through DWDM network elements, the VS254-D will pass those signals. element management provides detailed analysis of video and audio signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support. control of all card functions is available through element management or through on-board switches.
vIdEO INPutS StanDarDSHD-SDi SMPTe 292M
1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94
SDi SMPTe 259M
SDTi SMPTe 305M
aTSc SMPTe 310MDVb-aSi eN50083-9
JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.
Practice Measurement
SD/aSi SMPTe rP184 SMPTe rP192/eg33HD SMPTe rP184 SMPTe rP192
ELECtRICaL INPutNumber of inputs 1
connector Type 75 ohm bNc
return loss >15db at 1.5gbpsequalization >150m of belden 1694 at 1.5gbps
ELECtRICaL OutPutSNumber of Outputs 2 Jitter managedconnector Type 75 ohm bNc
OPtICaL INPutNumber of inputs 1
connector Type Sc/Pc
Wavelengths 1270nm–1610nm
Sensitivity at 1.5gbps –32dbm (worst case)Overload –8dbm
audIO OutPutSStandards SMPTe 299M (de-embedding)
aeS-3 (balanced and un-bal) Dolby-e
OutPutSNumber of Outputs 4
connector Type a 110 ohm, bal, 3-pin Phoenix
(a, b are Options) b 75 ohm, unbalanced
Sampling rage 48kHz
level a 1Vp-p +/- 10% b 0.5 to 10V p-p
FRONt PaNEL LEd INdICatORSa row of nine leDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms. each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.
ELEmENt maNagEmENtThe VS254 is compatible with the standard FcS183 and the FcS183-aeMS (advanced element Management System). both management systems are Web browser and SNMP enabled. a built-in-test HD-SDi generator can be enabled and switched in remotely to self-test the card. The FcS183-aeMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.
PHySICaL aNd ENvIRONmENtaLrequires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.
Power consumption <10W
Operating Temp 0 to 50 c ambient
Storage Temp –40 ˚c to +85 ˚c
relative Humidity 5% to 85%
aGency compLiance Telco NebS level 3 Safety ul, cSa, ce low voltage directiveeMc Fcc Part 15 class a, ce eMc directive
ORdERINg INFORmatIONVS254-D-SFP (PiN and aPD for 1310/1550 and cWDM)
VS254-e-SFPD (aPD for DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices. The VS254 supports both PiN, and aPD receivers for standard and cWDM as well as aPD for DWDM applications where the additional scrambling is used. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. consult factory for details. SFP denotes use of one of the VPg SFP-TV family of high performance video SFPs with PiN or aPD technology. Please see the SFP Selection guide for further details. The standard connector panel supports balanced aeS inputs with Phoenix 3-way connectors. if unbalanced bNcs are required please specify at the time of order.
High Definition 1.1
VeNTura
vS254-d-SFP
62 | network-electronics.com
High Definition
VeNTura
1.1
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of inputs 1
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M), SDi (SMPTe-259M),
HD-SDi (SMPTe-292M), DVb-aSi (eN50083-9), aTSc (SMPTe-310M)
# of inputs 1
# of outputs 2 electrical, 1 optical
Monitors 1 front panel
connector bNc
impedance 75 ohm
Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps
equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281
Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard
aNaLOg audIOStandards exceeds rS250c short haul specs
# of inputs 4
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48 KHz
Quantization 20-bit
SNr unweighted -90 dbFS
Frequency response 0.5 db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, @ 0 dbFS)
iMD <0.05% SMPTe @ +2 dbu
crosstalk between channels 95 dbinput/output level 0 dbFS = +24dbu (Hi-Z)
0 dbFS = +18dbu (600 ohms)
dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)
aeS balanced (aeS3-1992) Dolby e
# of inputs 2 rear balanced or unbalanced
connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm
Signal level unbalanced 1.2 Vp-p balanced 1 to 7 Vp-p
resolution Supports up to 24 bitsSample rates 32kHz, 44kHz, 48kHz sample rates converted
to 48kHz
OPtICaL tRaNSmIttER# of outputs 1
connector Sc/Pc
laser type SFP
laser wavelengths 1310nm, 1550nm, cWDM, DWDM
Output power level -0.5dbm min (1310 & 1550) -0.5dbm min (cWDM)
Fiber type Single mode
LEd INdICatORSVideo mode HD/SD/aSiloss of inputcrc/eDH for HD/SDaudio mode analog/aeSloss of audio analog 1, 2, 3, 4
aeS 1, 2
ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating temperature 0 ˚c to 50˚c chassis ambientStorage temperature –40 ˚c to 85 ˚c ambient
ORdERINg OPtIONSVS551-D-aDc-SFP analog to digital converter with audio
embedder (SFP cage included, SFP sold separately)
For optical interface options, see Ventura SFP index data sheet.
transmitter – universal analog & digital video/audio adapter for Fiber Optic transport
vS551-d-adC-SFP
• Automaticallydetectsvideoinputformat•ConvertsNTSC/PAL/PAL-MVideoandATSC,SD-SDI,HD-SDIandDVB-ASI
inputs to SDTi/SDi and optical output for transport over 270Mbps network•Handles525/625SD-SDIand1.4835/1.485GbpsHD-SDI•Compositetestpatterngenerator•ConvertsuptofourchannelsofanalogaudiotoAES•DolbyE–compatible•Non-intrusiveaudiomonitoringandleveladjustment• EmbedsAESconvertedfromanalogaudioordirect-fedAESintoSDTI,
SD-SDi or HD-SDi•WarningLEDsforlossofvideo,lossofaudio,CRC/EDH• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550,andany
iTu cWDM or DWDM wavelength• EngineeredtomeetNEBSLevel3requirements•CompatiblewithFCS183AEMSandEMSelementmanagers
network-electronics.com | 63
aNaLOg vIdEOStandards exceeds rS250c short haul spec
Formats NTSc (525 lines), Pal (625 lines)
# of outputs 2
Monitors 1 front panel
connector bNc
impedance 75 ohm
Quantization 12-bit
equalization up to 300m w/belden 8281
SNr >70db
Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)
dIgItaL vIdEOStandards SDTi (SMPTe-305M)
SDi (SMPTe-259M) HD-SDi (SMPTe-292M) DVb-aSi (eN50083-9) aTSc (SMPTe-310M)
# of inputs 1 optical (see optical spec), 1 electrical
# of outputs 2
Monitors 1 front panel
connector bNc
impedance 75 ohm
Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps
equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281
Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard
aNaLOg audIOStandards exceeds rS250c short haul specs
# of outputs 4
connector 3-pin terminal
impedance Hi-Z or 600 ohm (balanced)
Sampling rate 48KHz
Quantization 20-bit
SNr unweighted -90dbFS
Frequency response 0.5db (20Hz to 20KHz)
THD <0.05% (20Hz to 20KHz, at 0dbFS)
iMD <0.05% SMPTe at +2 dbu
crosstalk between channels 95dbinput/output level 0dbFS = +24dbu (Hi-Z)
0dbFS = +18dbu (600 ohms)
dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)
aeS balanced (aeS3-1992) Dolby e
# of inputs 2 rear balanced or unbalanced
connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm, unbalanced
Signal level unbalanced 1.2Vp-p balanced 1 to 7Vp-p
resolution Supports up to 24 bits
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver type SFP - aPD
input wavelengths 1260nm - 1620nm
Sensitivity ≤-34dbm
Max input power –8dbm (+7dbm with 15db attenuator)Fiber type Single mode
LEd INdICatORSVideo Mode HD/SD/aSiloss of input (local and remote)crc/eDH for HD/SDaudio mode analog/aeSloss of audio analog 1, 2, 3, 4
aeS 1, 2 (local and remote)
ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambientStorage Temperature –40 ˚c to 85 ˚c ambient
ORdERINg OPtIONSVS551-D-Dac-SFP universal analog and digital video and audio
fiber receiver
Receiver – universal analog and digital video and audio adapter for Fiber Optic transport
vS551-d-daC-SFP
• ReceivesallSD-SDI,HD-SDI,ASIandATSCopticallyandelectrically•De-embedsfourchannelsofaudiofromSD-SDIandHD-SDIandprovides
aeS and analog outputs •DolbyE–compatible•ConvertsSDTItoNTSC/PAL/PAL-M•Non-intrusiveanalogaudiomonitoringandleveladjustment• Lossofinput,lossofvideo,EDH/CRC,lossofaudioLEDs• RemotelossofvideoandlossofaudioLEDs• SmallFormfactorPluggable(SFP)opticswithAPDreceiverforoptimum
sensitivity• EngineeredtomeetNEBSLevel3requirements•CompatiblewiththeFCS183comprehensiveelementmanagementsystem
that provides remote status, alarms and configurations via SNMP and ethernet
High Definition 1.1
VeNTura
64 | network-electronics.com
ENCOdER dIgItaL vIdEO# of inputs 1 HD-SDi or 3g-SDi coax
# of Outputs 1 SDTi coax (SMPTe 305) 1 HD-SDi or 3g-SDi front panel monitor coax
connector coax
ENCOdER dIgItaL audIO# of inputs 4connector aeS/ebu 110 ohm balanced or 75 ohm
single ended units
dECOdER dIgItaL vIdEO# of inputs 1 SDTi coax (SMPTe 305)
# of Outputs 1 HD-SDi or 3g-SDi coax 1 HD-SDi or 3g-SDi front panel monitor coax
connector coax
dECOdER dIgItaL audIO# of Outputs 4connector aeS/ebu 110 ohm balanced or 75 ohm
single ended units
ENCOdER aNd dECOdER OPtICaL tRaNSCEIvER# of outputs/inputs 1connector SFP transceiver for ethernet, SDTi, Oc3/
STM-1, Oc12/STM-4
ENCOdER aNd dECOdER CLOCk INPut1 biTS clock input for use with SONeT
LEd INdICatORSPower indicator loss of input crc/eDH for HD/SD Optical fault indicator loss of audio
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Due to the complexity of VS901 functions, element management is its primary method of configuration and operation.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 9W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambientcompliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS901-Te-27 HD/SDi compression via JPeg 2000 and
mapping to SDTi (SMPTe 305). carriage of up to four pre embedded aeS streams. Separate carriage of Vbi information.
VS901-TD-27 SDTi receiver with decompression via JPeg 2000 of HD-SDi. re embedding of up to four transported aeS streams and any transported Vbi data
For optical interface options, see Ventura SFP index data sheet.
JPEg 2000 Compression over SdtI
vS901-tE-27 / vS901-td-27
iP Network interfaces
VeNTura
1.1
• Artifact-freeMotionJPEG2000compression—noblocking,tilingormotiondependence
• Visuallylosslesscompressiontoa12:1compressionratio•Near-mathematicallylosslesscompressiontoa2:1compressionratio•User-configurablecompressionratio,eitherbyexplicitsettingorby
selecting maximum bandwidth of transport interface•Multiplexesaudiointothetransportstream,eitherpre-embeddedintothe
HD-SDi signal or by locally embedding from aeS interfaces on the encoder• SupportsallHDvideoframingformatsat1485Mbps,1483.52Mbps•OccupiesasingleVenturachassisslot
12 34
12 34
VS901-TE-27 VS901-TD-27
HD/SDI/ASI HD/SDI/ASI
JPEG2000Encoder
AES Inputs
AES 1AES 2AES 3AES 4
AES 1AES 2AES 3AES 4
AES Outputs
HD HD HDHD
CompressedHD Video
CompressedHD Video
SDI/ASI SDI/ASI
270MbpsNetwork
SDTI
SDTIAudio & Data De-embedder
SFPMUX
1 2 3 4 1 2 3 4
Data Data
JPEG2000DecoderSDTI
SDTIAudio & Data
Embedder
SFP
DE-MUX
network-electronics.com | 65
ENCOdER dIgItaL vIdEO# of inputs 1 HD-SDi, SMPTe 292M, SMPTe 299M
# of outputs 1 HD-SDi front panel monitorconnector 75 Ohm bNc
ENCOdER dIgItaL audIO# of inputs 4connector aeS/ebu 110 Ohm balanced or 75 Ohm
single ended units
dECOdER dIgItaL vIdEO# of outputs 2 HD-SDi or 75 Ohm bNc
1 HD-SDi front panel monitorconnector 75 Ohm bNc
dECOdER dIgItaL audIO# of outputs 4connector aeS/ebu 110 Ohm balanced or 75 ohm
single ended units
ENCOdER aNd dECOdER EtHERNEt# of outputs/inputs 1connector 100/1000 base-T rJ45 ethernet connector
ENCOdER aNd dECOdER OPtICaL tRaNSCEIvER# of outputs/inputs 1
connector SFP transceiver for ethernet, dual Sc/Pc
LEd INdICatORSPower indicator loss of HD video loss of audio crc errors and iP Fec Optical fault indicator
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Due to the complexity of VS901 functions, element management is its primary method of configuration and operation.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 10W max
Operating temperature 0˚ to 50˚c chassis ambient
Storage temperature –40 ˚c to 85 ˚c ambientcompliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS901-ie-ge HD/SDi compression via JPeg 2000 and
mapping to gigabit ethernet. carriage of up to four pre-embedded aeS streams. Separate carriage of aNc data information
VS901-TD-27 gigabit ethernet receiver with decompression via JPeg 2000 of HD-SDi. re-embedding of up to four transported aeS streams and any transported aNc data
For optical interface options, see the Ventura SFP index data sheet.
iP Network interfaces 1.1
VeNTura
JPEg 2000 Compression Over gigabit Ethernet
vS901-IE-gE* / vS901-Id-gE*
• EncoderanddecodereachoccupyasingleVenturachassisslot• SupportsallHDvideoframingformatsat1485Mbpsand1483.5Mbps•Multiplexesuncompressedaudiointothetransportstream,eitherpre-
embedded into the HD-SDi signal or by locally embedding from aeS interfaces on the encoder
• Transparentcarriageofancillarydata• Artifact-freemotionJPEG2000compression–noblocking,tilingormotion
dependence• Intra-frameencoding•Near-mathematicallylosslesscompressionwithaGigabitEthernetinterface• Visuallylosslesscompressiontoa12:1compressionratio• Automaticallycalculatesmathematicallylosslesscompressionratioforeach
frame to ensure constant lossless quality•ConfigurableFECwithstandardandadvancedmodesettings•ComplieswithIEEE802.3standards• IP/UDP/RTPpackets• Simultaneouselectricalandopticaloutputsfromencoder• Encodeplusdecodedelaylessthan50ms•CompatiblewithFCS183-AEMSAdvancedElementManagementSystem
12 34
12 34
VS901-IE-GE VS901-ID-GE
HD HD
JPEG2000Encoder
AES Inputs
AES 1AES 2AES 3AES 4
AES 1AES 2AES 3AES 4
AES Outputs
HDHD
CompressedHD Video
CompressedHD Video270Mbps
Network
100/1000 Base-T 100/1000 Base-T
100/1000 Base-T100/1000 Base-T
Audio & Data De-embedder
SFPMUX
1 2 3 4 1 2 3 4
ANC Data ANC Data
JPEG2000Decoder
Audio & Data Embedder
SFP
DE-MUX
66 | network-electronics.com
dIgItaL I/O# of inputs 1
# of Outputs 1
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
Data rate 270Mbps
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
RS422# of channels 1
connector Db9 Female
receive Data Jitter <±40nsreceiver Termination 124 ohm
LEd INdICatORSchannel 1 i/O activity loss of optical input loss of frame laser failure Dc power
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENtcompatible with the FcS183 and FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of optical input loss of frame loss of input loss of channel i/O activity
Status Optical/electrical receiver mode laser transmitter enabled/disabled Model and serial number
controls receiver mode optical/electrical laser transmitter enable/disable iD setting for the VS811 (0-65535)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS701-SFP rS422 control fiber optic transceiver
SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN
RS422 Control Fiber Optic transceiver
vS701
Data
VeNTura
1.1
•OnefullduplexindependentRS422channel•Upto2Mbps• Lowtimingjitterduetohighoversamplingrate•CanbeswitchedthroughandSDIrouter• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
RS422 CH1
1310/1550/CWDM
270Mbps
TX
RX
TX
RX
VS711 RS422 CH1
1310/1550/CWDM
270Mbps
RX
TX
RX
TX
VS711270MbpsNetwork
network-electronics.com | 67
dIgItaL I/O# of inputs 1
# of Outputs 1
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
Data rate 270Mbps
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type PiNFeT pigtail
input Wavelengths 1260nm–1620nm
Sensitivity ≤-34dbm
Max input Power 0dbmFiber Type Single mode
RS422# of channels 4
connector Db25 female
receive Data Jitter <±40nsreceiver Termination 124 ohm
LEd INdICatORSchannel 1 i/O activity channel 2 i/O activity channel 3 i/O activity channel 4 i/O activity loss of optical input loss of frame laser failure Dc power
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENtcompatible with the FcS183 and FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms loss of optical input loss of frame loss of input loss of channel i/O activity
Status Optical/electrical receiver mode laser transmitter enabled/disabled Model and serial number
controls receiver mode optical/electrical laser transmitter enable/disable iD setting for the VS811 (0-65535)
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V, -12V
Power consumption 7W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS711-SFP-TrX Fiber optic transceiver with 4 rS422 ch.
SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1310-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX, cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN
Data 1.1
VeNTura
quad RS422 Control Fiber Optic transceiver
vS711
• FourfullduplexindependentRS422channels•Upto2Mbpsperachannel• Lowtimingjitterduetohighoversamplingrate•CanbeswitchedthroughanSDIrouter• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
RS422 CH1
RS422 CH2
RS422 CH3
RS422 CH4
1310/1550/CWDM
270Mbps
TX
RX
TX
RX
VS711
RS422 CH1
RS422 CH2
RS422 CH3
RS422 CH4
1310/1550/CWDM
270Mbps
RX
TX
RX
TX
VS711270MbpsNetwork
68 | network-electronics.com
dIgItaL I/O# of inputs 1
# of Outputs 1
connector rJ45
impedance 100 ohm
Data rate 100/10Mbpsequalization 100M cat 5e
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
Data rate 100/10Mbps
laser Type SFP
laser Wavelengths 1310nm, 1510nm, 1530nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type SFP
input Wavelengths 1260nm–1620nm
Sensitivity ≤–32dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSFiber full/half duplex Fiber link/activity auto negotiate 10 M 100 M 1 g uTP full/half duplex uTP link/activity Dc power
EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power SFP iinternal supply voltage SFP transmitter internal bias current SFP internal temperature uTP link alarm
Status SFP laser transmitter present Full duplex mode for fiber selected auto negotiation activated link speed 100Mbps rJ45 uTP is in full duplex mode SFP transmitter wavelength Model and serial number
controls laser transmitter enable/disable
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis
Voltage +3.3V, +5V, +12V
Power consumption 7W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ORdERINg OPtIONSVS721 10/100 base-T ethernet
SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN
10/100 Base-t Ethernet Optical transceiver
vS721
Data
VeNTura
1.1
• Full-featured10/100Base-TEthernetmetropolitantransportsolution•Greaterthan30dBopticallinkbudget• SFPopticsallowforoptimumsparingandfastconfigurationtoavailable
Ventura wavelengths• Standardsbasedonthefiberinterface—100Base-T•UTPportsupports10/100andhalf/fullduplexaswellasauto-negotiation• Automaticcableequalizationupto100matgigabitrate• FrontpanelLEDinformationprovideslinkdiagnosticsallowingforinstant
fault location• BandwidthcontrolallowsserviceproviderstoconfigureUTPrateto10or
100 Mbps•CanbeusedinbothVS101andVS103Venturachassis•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
1310/1550/CWDM 1310/1550/CWDMTX
RX
100 Base-T 100 Base-T
RJ-4510/100Base-T
270MbpsNetworkVS721
RX
TXRJ-4510/100Base-T
VS721
network-electronics.com | 69
dIgItaL I/O# of inputs 1
# of Outputs 1
connector rJ45
impedance 100 ohm
Data rate 1000/100/10Mbpsequalization 100M cat 5e
OPtICaL tRaNSmIttER# of Outputs 1
connector Sc/Pc
Data rate 1000/100/10Mbps
laser Type SFP
laser Wavelengths 1310nm, 1510nm, 1530nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector Sc/Pc
receiver Type SFP
input Wavelengths 1260nm–1620nm
Sensitivity ≤–32dbm
Max input Power 0dbmFiber Type Single mode
LEd INdICatORSFiber full/half duplex Fiber link/activity auto negotiate 10 M 100 M 1 g uTP full/half duplex uTP link/activity Dc power
EXtERNaL aLaRmSN/O relay contact outputs for major and minor alarm signals.
PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis.
Voltage +3.3V, +5V, +12V
Power consumption 7W max
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambient
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-Tick
ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces to monitor and configure card status, alarms and controls.
alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power low SFP internal supply voltage high SFP internal supply voltage low SFP transmitter internal bias current high SFP transmitter internal bias current low SFP internal temperature high SFP internal temperature low SFP transmitter output power high uTP link alarm
Status SFP laser transmitter present Full duplex mode for fiber selected auto negotiation activated link speed 1000Mbps rJ45 uTP is in_full_duplex_mode SFP transmitter wavelength Model and serial number
controls laser transmitter enable/disable
ORdERINg OPtIONSVS722-TrX-SFP
SFp optionSSFP-Tr1-1310-PiN-S 1gbps, TrX, non-cWDM SFP-Tr1-1550-PiN-S 1gbps, TrX, non-cWDM SFP-Tr1-1470-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1490-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1510-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1530-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1550-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1570-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1590-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1610-PiN-c
Data 1.1
VeNTura
gigabit Ethernet Fiber transport
vS722
• Full-featuredGigabitEthernetmetropolitantransportsolution•Greaterthan30dBopticallinkbudget• SFPopticsallowsforoptimumsparingandfastconfigurationtoavailable
Ventura wavelengths• Standards-basedonthefiberinterface—1000Base-LX•UTPportsupports10/100/1000andhalf/fullduplexand
auto-negotiation• Automaticcableequalizationupto100matgigabitrate• FrontpanelLEDinformationprovideslinkdiagnostics
allowing for instant fault location• BandwidthcontrolallowsserviceproviderstoconfigureUTP
rate to 10 or 100 or 1000 Mbps•CanbeusedinbothVS101andVS103Venturachassis•NEBSLevel3certified•CompatiblewiththeFCS183-AEMSAdvancedElementManagement
System that provides remote status, alarms and configurations via SNMP and ethernet
1310/1550/CWDM 1310/1550/CWDMTX
RX
1000 Base-LX 1000 Base-LX
RJ-4510/100/1000
Base-T
270MbpsNetworkVS722
TX
RXRJ-4510/100/1000Base-T
VS722
70 | network-electronics.com
dIgItaL vIdEOStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
connector bNc
impedance 75 ohm
Data rate up to 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 1
connector ST
laser Type Pigtail, SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
LEd INdICatORSSDi in laser fail Dc power
PHySICaL aNd ENvIRONmENtaLThe (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NeMa 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear.
Voltage +12V +/-1V
Power consumption 3W typical
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambientrelative Humidity 5% to 85%
ORdERINg OPtIONSODu201-SFP-eO SDi/aSi e/O, no laser
ODu-PSDc Dc, 1 amp powersupply
SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN
SdI/aSI Fiber Optic transport
Odu201
Specialty
VeNTura
1.1
• SDI,SDTIandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofvideo,lossofinput,laserfailureandDCpowerLEDs• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength
1310/1550/CWDM PIN Rcv’rSDI (SMPTE-259M)
SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)270Mbps
Network270Mbps
270Mbps
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
270Mbps
ODU201 VS231-OE
network-electronics.com | 71
dIgItaL I/OStandards SDi (SMPTe-259M)
SDTi (SMPTe-305M) DVb-aSi (eN50083-9)
# of inputs 1
connector bNc
impedance 75 ohm
Data rate 270Mbpsequalization up to 300m w/belden 8281
OPtICaL tRaNSmIttER# of Outputs 2
connector ST
Data rate 270Mbps, rS422
laser Type SFP
laser Wavelengths 1310nm, 1550nm, cWDM, DWDM
Output Power level 0dbm minFiber Type Single mode
OPtICaL RECEIvER# of inputs 1
connector ST
receiver Type PiN
input Wavelengths 1260nm–1620nm
Sensitivity ≤–34dbm
Max input Power 0dbmFiber Type Single mode
RS422# of channels 1
connector Db9 female
receive Data Jitter <±40nsreceiver Termination 124 ohm
LEd INdICatORSrS422 aLarmS SDi aLarmS laser fail SDi in low light laser fail lOF (optical input) rS422 in rS422 out Dc power
PHySICaL aNd ENvIRONmENtaLThe (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NeMa 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear.
Voltage +12V +/-1V
Power consumption 8.5W typical
Operating Temperature 0 ˚c to 50 ˚c chassis ambient
Storage Temperature –40 ˚c to 85 ˚c ambientrelative Humidity 5% to 85%
ORdERINg OPtIONSODu271-SFP-eO-SFP SDi/422 e/O, TX + rS422 Transceiver
ODu-PSDc Dc, 1 amp Power Supply
SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN
Specialty 1.1
VeNTura
RS422 Control Fiber Optic transceiver
Odu271
• SingleRS422channel•Upto2Mbpsperchannel• Lowtimingjitterduetohighoversamplingrate•CanbeswitchedthroughanSDIrouter• SDI,SDTIandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofvideo,lossofinput,laserfailureandDCpowerLEDs• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength
SDI (SMPTE-259M)SDTI (SMPTE-305M)
DVB-ASI (EN50083-9)
SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)
RS422 Data I/O
RS422 Data I/O
1310/1550/CWDM
TX
RX
RX
TX
1310/1550/CWDM
RX1310/1550/CWDM
TX
ODU271
VS231-OE
VS701-OE
270MbpsNetwork
72 | network-electronics.com
2-Channel SmPtE310-m to dvB-aSI Converter
vS192
Specialty
VeNTura
1.1
The VS192 is a SMPTe310-M to DVb-aSi converter with dual SMPTe310-M input and dual coaxial cable and single optical output for each channel.
it has two independent transmission channels which can accept SMPTe310-M transmission stream (19.39Mbps) and output DVb-aSi at 270Mbps. each channel can be configured as an electro-optical converter by the installation of a VPg SFP optical video laser module.
• Twoindependentchannelspercard• SMPTE310-MtoDVB-ASImapping•Opticalandelectrical270Mbpsoutputs• 188,204and208bytesupport• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU
cWDM or DWDM wavelength• ATSCandASIcompatible• Automaticrecognition,controlandconfigurationbyFCS183-AEMSand
FcS183-aeMS using SNMP or Web browser interface•Userdefinablealarmsbasedonpriority(major,minorornoalarm)• Slowstartcircuitonallpowerrailstominimizepowersupplyovershoot•NEBSLevel3compliant
network-electronics.com | 73
dIgItaL vIdEOStandards 19.392Mbps (SMPTe310-M)
DVb-aSi (eN50083-9)
# Of inputs 2 (SMPTe310-M)
# Of Outputs 4 (coaxial cable) 2 (optical fiber)
connector bNc
impedance 75ohm
Data rate up to 270Mbpsequalization up tp 200m
OPtICaL tRaNSmIttER# Of Outputs 2
connector Sc/Pc
laser Type SFP
laser Wavelength 1310nm, 1550nm, cWDM, DWDM
Output Power level -0.5dbm minFiber Type Single mode
LEd INdICatORS PWr backplane power status
cH1 SMPTe310-M activity on input
cH1 lSr SFP laser fault status
cH2 SMPTe310-M activity on input
cH2 lSr SFP laser fault/presence
CONFIguRatIONeach channel will have simultaneous optical and electrical outputs if a transmitter SFP is populated. enable “keep-alive” separately for each channel, controlled by element management or DiP switch, consisting of option to output continuous “comma” characters in absence of input SMPTe310-M signal.
ELEmENt maNagEmENtcompatible with the FcS183-aeMS and FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.
Status cH1/cH2 SMPTe310-M cH1/cH2 SFP laser transmitter cH1/cH2 SFP laser transmitter Fail controls set by switches/element management cH1/cH2 default output enabled by DiP switch with loss of SMPTe310-M input
controls cH1/cH2 default output enabled with loss of SMPTe310-M input
PHySICaL aNd ENvIRONmENtaLThe VS192 card resides in a single slot of a VS103 series chassis.
Voltage 5V and 3.3V chassis supply
Power consumption 7W max
Operating Temperature 0 °c/32°F to 50 °c/122°F
Storage Temperature -40 °c/-40°F to 85 °c/185°F
relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,
Fcc (Part 15, class a), c-TicK, and roHS
ORdERINg OPtIONSVS192-SFP SMPTe310-M to DVb-aSi converter
Specialty 1.1
VeNTura
vS192
DVB-ASI (1)DVB-ASI (2)
BroadcastStudio
SMPTE310-MATSC TS1
SMPTE310-MATSC TS2
DVB-ASI (1)DVB-ASI (2)VS192
Standard Application for VS192 ATSC Transport Stream (SMPTE310-M) to DVB-ASI Adapter
IPTV
Cable
Distribution to
Residential Customers
Cableor
IPTVor
SatelliteHeadend
270MbpsDVB-ASI
Transport NetworkOptical
or Telco
74 | network-electronics.com
Break Out Panel, Frame and Cable
Specialty
VeNTura
1.1
VS150-Fr –1ru break out panel frame for one or two break out panels VS711
bP-Pl75 – break out panel for VS711. eight twin-ax Pl75 connectors
Db25/Pl-75-XX – cable between VS711db25 connector and Pl75 break out panel
XX is the cable length in feet. Not to exceed 10 feet.
network-electronics.com | 75
1.1
VeNTura
76 | network-electronics.com
Small Form-factor Pluggable Components
SFP OPtIONS
SFP Selection index
VeNTura
1.1
SFP components provide flexibility by enabling a Ventura card to support different line speeds or laser wavelengths at different times, or to change from simplex to duplex communications.
This document describes the functions provided by various SFP components, and the Ventura cards where they can be used.
Video Products group SFP part numbers indicate the part’s laser color or wavelength in the third part-number element. The fourth element should be interpreted as follows:S 1310 or 1550 Standard DFb SD Standard Distributed Feedback (not “Standard Definition”) SF Standard Fabrey-Perot c cWDM PiN Optimized for 270Mbps (SD-SDi) aPD Optimized for 1485Mbps (HD-SDi)
270mbps simplex video signals
available for:
VS192 VS201 VS501 VS621 VS701 ODu201
VS194 VS231 VS551 VS661 VS711 ODu271
VS721
Part number SFP-TV-1310-S
270 or 1485mbps simplex video signals
available for:
VS251 VS252 VS254
Part number SFP-TV-1310-SD
network-electronics.com | 77
SFP Selection index 1.1
VeNTura
SFP OPtIONS
3gbps simplex signals
available for VS411 VS811
Part numbers:
SFP-T3-1310-S SFP-T3-1510-c SFP-T3-1550-S SFP-T3-1610-c
SFP-T3-1470-c SFP-T3-1530-c SFP-T3-1570-c SFP-r3-aPD
SFP-T3-1490-c SFP-T3-1550-c SFP-T3-1590-c
270mbps full duplex video signals
available for VS231-OO
Part numbers:
SFP-TrV-1310-PiN-SF SFP-TrV-1470-PiN-c SFP-TrV-1550-PiN-c
SFP-TrV-1550-PiN-SD SFP-TrV-1490-PiN-c SFP-TrV-1570-PiN-c
SFP-TrV-1510-PiN-c SFP-TrV-1590-PiN-c
SFP-TrV-1530-PiN-c SFP-TrV-1610-PiN-c
1485mbps full duplex video signals
available for VS251 VS252 VS254
Part numbers:
SFP-TrV-1310-aPD-SD SFP-TrV-1470-aPD-c SFP-TrV-1550-aPD-c
SFP-TrV-1550-aPD-SD SFP-TrV-1490-aPD-c SFP-TrV-1570-aPD-c
SFP-TrV-1510-aPD-c SFP-TrV-1590-aPD-c
SFP-TrV-1530-aPD-c SFP-TrV-1610-aPD-c
1gbps full duplex signals
available for VS722
Part numbers:
SFP-Tr1-1310-PiN-S SFP-Tr1-1510-PiN-c SFP-Tr1-1570-PiN-c
SFP-Tr1-1550-PiN-S SFP-Tr1-1530-PiN-c SFP-Tr1-1590-PiN-c
SFP-Tr1-1470-PiN-c SFP-Tr1-1550-PiN-c SFP-Tr1-1610-PiN-c
SFP-Tr1-1490-PiN-c
270 or 1485mbps simplex video signals
available for VS192 VS201 VS251 VS501 VS621 VS701 ODu201
VS194 VS231 VS252 VS551 VS661 VS711 ODu271
VS254 VS721
Part numbers:
SFP-TV-1470-c SFP-TV-1530-c SFP-TV-1570-c SFP-rV-PiN (270)
SFP-TV-1490-c SFP-TV-1550-c SFP-TV-1590-c SFP-rV-aPD (1485)
SFP-TV-1510-c SFP-TV-1550-SD
SFP-TV-1610-c
78 | network-electronics.com
Monitoring and Test System
PluS
1.2
dvB-aSI/SdI monitoring and test System
FCS1000
FcS100 provides a high-density, cost-effective QoS monitoring solution.
each input has a 270Mbps interface, allowing monitoring of either DVb-aSi signals or serial digital video signals. Service management is provided via an embedded Pc-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. all alarm conditions can be mapped into SNMP traps as well as individual gPi outputs for local alarms.
• In-servicemonitoringforupto16channelsin1RU•DVB-ASIorSMPTE259SDIcapable•CheckingofallDVBinputstreamstoETR101290•CheckingtoSMPTERP165onSDIinputstreams•High-impedancepassive‘BNCTee’foreachchannel• ComprehensiveSNMPtrapsandinforms• SeparateGPIcontactalarmsforeachchannel• Fullinternaldiagnostics• ASIstreamhandlingfrom16Kbps–216Mbps• 10/100baseTEthernetmanagementport• SerialportcommunicationsforlocaldiagnosticsandISDN/PSTNadapters• Powerfulalarmfilteringandlogging•QoSprofilepresetsandweeklyscheduling• Remoteuploadsofnewschedulesandfirmwareupgrades
network-electronics.com | 79
Monitoring and Test System 1.2
PluS
OPERatIONbrowser based, multi-channel, menu-driven QoS monitoring system. configurable for SDi or aSi in groups of four. a set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTe rP165 or eTr 101290.
up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.
an alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. individual channel SNMP informs are generated and sent based on the settings of this screen.
dvB-aSI mONItORINg SmPtE 259m SdI mONItORINgeTr 101 290 SMPTe rP165
Signal present Signal present
TS sync loss eDH–Missing
TS sync byte errors eDH–Packet error
PaT error active Picture (aP) eDH error here
continuity count error aP error detected already
PMT error aP unknown error status
PiD error Full Field (FF) error detected here
Pcr error / accuracy FF error detected already
caT error FF unknown error status
NiT error ancillary (aNc) error detected here
SDT error aNc error detected already
eiT error aNc unknown error status
rST error Other alarms
TDT error Video black
rS Fec error Freeze framecontinuity count audio (group error, silence, phase and
overload)
POWER aNd ENvIRONmENtaLPower automatic 110~240 V ac, iec connector
Power consumption 0.15a , 240Vac, <35W
cooling Forced via side intake and exhaust vents
Operating Temperature between 0 °c and 50 °cOperating Humidity 10% to 90% (non-condensing)
ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls. Some of the features are:- SNMP V2c ready- Telnet based remote and secure login- remote firmware downloads
CONNECtOR tyPESethernetTelnet remote linux system configuration
FTP Firmware downloads
HTTP Web browser access
SNMP element management
connector rJ45 10Mbps
No. of connectors Single access (16 channels)
Password levels administrator/user
Operating Systems Windows 98, 2000 Pro, XP Pro and linuxWeb browser internet explorer 6.0
Netscape Navigator 7.2rS232 / eia232For linux System configuration (two connectors, front and rear access)
connector Db9 (male)
No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits, no
parityGpioTo interface Ventura chassis with user’s equipment
connector DSub-25 pinNo. of connectors 1, with 16 TTl compatible i/O lines
PHySICaLWidth Front panel: 19” eia standard
(483mm) (exc. rack ears: 440m)
Height 1.7” (43mm), 1ru
Depth 19” (484mm) (including rear connectors)Weight 11lbs. (5kg) (6kg with delivery packing)
ORdERINg OPtIONSFcS1000 Focus monitoring and test system
dvB-aSI/SdI monitoring and test System
FCS1000
80 | network-electronics.com
Point-to-Point Fiber Optic Transport
PluS
1.2
multi-Format video & audio Fiber Optic Link with Jitter Removal
tv-1 PLuS
•NTSC/PAL/PAL-M/PAL-N,SDIorASI,plusaudiotransportinasingle1RUchassis
• Signal-to-noiseratiosinexcessof73dB• 12-bitanalogvideoencoding• SNMPElementManagementvia10-BaseTEthernetinterface• Lockedselectionofchosentariff• Exceeds250CShortHaulSpecifications• 4audiochannelsofinput:2AESsignalsof2channelseachor4analog
audio channels or 1 aeS signal and 2 analog audio channels• Selectablere-sampledornonre-sampledAESmodes• SupportsSMPTE272Masynchronous(resampled)and
synchronous (non-resampled)• 48kHzinsertion• RemovalofSDItimingandalignmentjitter• AutomaticEDHcorrectionand/orinsertion• Indicators/externalalarmsforlossofcarrier&audio
network-electronics.com | 81
Point-to-Point Fiber Optic Transport 1.2
PluS
StaNdaRdS / COmPLIaNCEDiGitaL ViDeoSDi SMPTe 259M
SDTi SMPTe 305M
DVb-aSi eN50083-9
DiGitaL auDioaeS/ebu aeS-1992 & Dolby eembedding acc. to SMPTe 272M
aNaLOg vIdEO aNd audIONTSc exceeds rS250c short haul
NTSc exceeds Telcordia gr338-cOre
Pal exceeds iTu-r624-4 and ccir 567SNr in excess of 73db
COmPLIaNCEDesigned for NebS level 3 compliance
Safety ul,cSa, ce
eMc Fcc class a, ce
CONFIguRatION OF SERvICESerVice SeLection Switchlocation On TX front panel
Switch type rotary switch
Termination 75ohm termination switch for NTSc/Pal/Pal-M video (on/off)
Different combinations of video and audio can be set using either element Management or the front panel rotary switch settings as listed:
JIttER maNagEmENtJiTTer TOleraNce >4ui in the range of 10Hz to 10kHz
>0.25ui in the range of 1MHz to 5MHzJiTTer TraNSFer >20db attenuation at jitter frequency > 1kHz
PHySICaL INtERFaCESDigiTal ViDeO
Qty TX* 1 input plus 1 front panel monitor of input
Qty rX* 1 input plus 1 front panel monitor of input
connector type 75Ω bNc
Signal level 800mV (pk-pk)
return loss >15dbcable eQ >300m (belden 8281)
dIgItaL audIOQty TX* 2 aeS inputs
Qty rX* Duplicate outputs plus front panel monitors of outputs
connector Type 110Ω Phoenix balanced
aNaLOg vIdEOQty TX* 1 input plus 1 loop through plus 1 front
panel monitor of input
Qty rX* Duplicate outputs plus 1 front panel monitor of output
connector type 75Ω bNc floating
cMMr >60db @ 60Hz
return loss >30db
cable eQ >130m (belden 8281)
Quantization 12 bitsSignal-to-Weighted-random Noise ratio
(10kHz to 4.2 MHz) 73db
aNaLOg audIOQty TX* 4 inputs plus 4 front panel monitors of inputs
Qty rX* Duplicate outputs plus 4 front panel monitors of outputs
connector Type 600ohm Phoenix balancedlevel FS + 18dbu @ 600ohm
OPtICaLTX Output Power -2dbm (+/- 1db)
Wavelength 1310nm or cWDM
Optical receiver 1200nm to 1600nm
rX Sensitivity <-32dbm (10e-9 eDH)
Overload <–1dbm (10-9 eDH)
connectors Sc/Pc
NOTe: *Video can be either digital or analog. audio can be a total of two stereo’s with any mix of analog and digital or analog only or digital only.
aLaRm maNagEmENtFront paneL LeDSloss of video Yellow (or off)
SDi detect green (or off)
aSi detect green (or off)
NTSc/Pal detect green (or off)
loss of audio Yellow (or off)
an audio 1 detect green (or off)
an audio 2 detect green (or off)
aeS 1 detect green (or off)
aeS 2 detect green (or off)
Power/Fan red / green
laser alarm (TX) red (or off)
Optical alarm (rX) red / Yellow
alarm data is also accessible via a single Phoenix 3-pin male connector located on the rear of each chassis (TX and rX).
SNmP ELEmENt maNagEmENtSNMP element Management is provided via an ethernet interface (10-baseT) located on the rear of each chassis. This enables remote configuration and monitoring of alarms through a third party element management system or using VPg’s gui.
POWER / ENvIRONmENtaLVoltage 90-254Vac, 50Hz/50Hz
redundancy Dual PSu’s, each fused separately
Power TX/rX <20W
current 1.5amps
Operating temp 0 °c to +50 °c
Storage temp -40 °c to +80 °cHumidity 10% - 90% rH, non-condensing
PHySICaLDimensions 1ru rack mount (1.75”Hx 19”W x 14”D)Weight 10 lbs
ORdERINg OPtIONSTV-1 PluS TX: 1ru encoder/Transmitter
TV-1 PluS rX: 1ru receiver/Decoder link with Jitter removal
tv-1 PLuS
82 | network-electronics.com
Point-to-Point Fiber Optic Transport
PluS
1.2
mPEg 2 Encoder and decoderNtSC/PaL/SdI + audio to aSI/dS3/100Baset Network Interfaces
tv-C PLuS
•NTSC/PALcompositeorSDIinputsandoutputs• EightindependentchannelsofanalogaudioorfourAES/EBU• VideoandaudiogainandcableEQadjustatallanalogI/Os• Supportspre-embeddedorlocallyembeddedaudio•DVB-ASI,DS3and10/100Base-Tinterfaces• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof
equipment and link• FullVBIsupport• 4:2:2PatMLwithtransportstreamofupto50Mbps• 4:2:0supportwithtransportstreamsofupto25Mbps• SimpleGOPstructureconfigurationthroughelementmanagementGUI• Intuitivefrontpanel,easy-to-navigateLCDmenuwithpushbutton
controls• ACandDCpoweroptionswithoptionalredundancy
network-electronics.com | 83
Point-to-Point Fiber Optic Transport 1.2
PluS
OPERatIONThe TV-c PluS MPeg-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSc/Pal and analog audio and SDi and aeS are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-c PluS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at Ml and 4:2:2 P at Ml support. ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. also, by providing aSi, ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.
COmPRESSION/dE-COmPRESSIONViDeoFormat MPeg-2 (iSO/iec 13 818-2)
Profile 422P at Ml or MP at Ml
gOP adjustable
bit rate From 1,5Mbps to 50Mbps
Delay <140ms
auDioFormat MPeg-1 layer ii (iSO/iec 11172-3)
Mode Stereo, Joint Stereo, Mono, Dual Monobit rate From 64 to 384Kbps
ENCOdER INPutS – vIdEO anaLoGSystem specifications Pal/NTSc (iTu r-bT 470.rS250-c)
Number of inputs 1
impedance 75 ohm
Nominal level 1Vpp
bandwidth >5MHz
S/N lum Wt. >68db (Profile dependent)
cable eq >100m
DiGitaL Format SDi 4:2:2 (625/625) (iTu-r 656)
cable eq >250m belden 8281
otherVertical blanking interval (Vbi) transport is fully supported by stripping the Vbi lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.
an SDi pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process.
ENCOdER INPutS – audIO anaLoGNumber of inputs up to 8 independent channels
connector type Phoenix 3-pin
impedance 600 ohm or Hi-Z
S/N (TX to rX) > 80db rms, > 62db
DiGitaL System specification aeS-3
connector type Three, Phoenix
impedance 110 ohm, balanced
Sample frequency 32, 44.1, 48Khz
otheraudio may also be carried pre-embedded in the SDi stream. if configured to do so, this audio will be de-embedded and processed by the encoder. an on-board tone generator is also present that can be enabled for link and audio processing verification.
dECOdER OutPutS-vIdEO anaLoGSystem specifications Pal/NTSc (iTu r-bT 470.rS250-c)
Number of inputs 1
impedance 75 ohm
Nominal level 1Vpp
bandwidth >5MHz
S/N lum Wt. >68db (Profile dependent)
cable eq >100m
DiGitaL Format SDi 4:2:2 (625/625) (iTu-r 656)
dECOdE OutPutS – audIO anaLoGNumber of outputs up to 8 independent channels
connector type Phoenix 3-piin
impedance 600 ohm or lo-Z
S/N (TX to rX) > 80db rms, > 62db
DiGitaL System Specification aeS-3
connector type Three, Phoenix
impedance 110 ohm, balancedSample frequency 32, 44.1, 48Khz
NEtWORk INtERFaCES ENCOdER/dECOdERFormatSaSi eN 50083-9
e3 g.751
DS-3 g.751, c-bit Parity or M-Frame*
10/100baseT uDP/rTP, unicast and Multicast
maNagEmENt aNd CONtROLboth encoder and decoder can be configured via front panel push buttons and lcD display. The main status, control and alarm interfaces are through an rS-232 port and an rJ-45 10 baseT port on the rear panel of each unit.
PHySICaL aNd ENvIRONmENtaLThe TV-c PluS is fitted with both ac plus Dc power supplies. redundancy is enhanced through unique cross coupling of Dc inputs and outputs when two or more units are present.
Power consumption <25 Watts per unit
Operating temp 0 ˚c to 50 ˚c ambient
Storage temp –40 ˚c to +85 ˚c
relative humidity 5% to 85%
aGency compLiance Safety ul, cSa, ce low Voltage DirectiveeMc Fcc Part 15 class a, ce eMc Directive
ORdERINg INFORmatIONVPg TV-c PluS – eNc encoder
VPg TV-c PluS – Dec Decoder
tv-C PLuS
84 | network-electronics.com
POWER SuPPLy SyStEm ac Dcinput voltage options 108-250Vac -48VDc
input ac frequencies 46-63Hz
Power consumption <30W per module (fully configured)additional features Power supplies are dual redundant,
load-sharing
ENvIRONmENtaL/COmPLIaNCEOperating temperature 0 °c to +50 °c
Storage temperature -10 °c to +70 °c
Humidity 20%–80%, non-condensing
eMc compliance Fcc, ceSafety compliance ul, cSa, ce
ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). This optional card supports two functional module slots. its rS-232 interface may be chained to support up to 32 chassis. aScii command-line interface is provided for ease of use. consult the VPg element Management System data sheet for further information on element management software capability.
advaNCEd ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). This optional card supports two functional module slots. its browser user interface allows for ease of use. Mib tables available for integration within SNMP compliant systems.
mONItORINgStatus, control, and alarm messages can be sent to the element management software. These messages include chassis-specific information: Status
Module present/absent Option(s) present/absent Module location/iD/serial number control Set module location/iD alarm Module fail Over-temperature
ORdERINg INFORmatIONcontact factory for ordering information.
2Ru modular universal Chassis
vPg6200
braVONeT
1.3
•Chassisdesignsupportstwomodulesforlowdensityapplications• Symmetricalarchitectureforslotindependence•Mid-planedesignenablesmix-and-matchofmodulesandconnections•Chassisacceptsanyaudio/videotransportmoduledesignedforthe
braVOnet™ product line• RedundantACorDCpowersupplysystemwithload-sharing• Built-infibermanagement• Elementmanagementmoduleismountedonthepowersupply,savinga
chassis slot
chassis and Power Supply
network-electronics.com | 85
ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). its rS-232 interface may be chained to support up to 32 chassis. aScii command line interface is provided for ease of use. consult the VPg element Management System data sheet for further information on element management software capability.
advaNCEd ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). This optional card supports two functional module slots. its browser user interface allows for ease of use. Mib tables available for integration within SNMP compliant systems.
POWER SuPPLy SyStEm ac Dcinput voltage options 108-132Vac -24VDc
210-250Vac -48VDc
input ac frequencies 46-63Hz
Power consumption <30W per module (fully configured)
chassis capacity 180W, max.additional features Power supplies are dual-redundant, load-
sharing and hot-swappable
ENvIRONmENtaL/COmPLIaNCEOperating temperature 0 °c to +50 °c
Storage temperature -10 °c to +70 °c
Humidity 20%–80%, non-condensing
eMc compliance Fcc, ceSafety compliance ul, cSa, ce
ORdERINg INFORmatIONchaSSiSVPg6000cH-03 5ru universal modular chassis with heat
deflector/fan assemblyVPg6000cH-05 5ru universal modular chassis with heat
deflector/fan assembly, For use with rJ-45 port aNM element manager.
POWER SuPPLIES aNd aCCESSORIESVpG6000ac power SuppLyVPg6000-120 115Vac, nom.
VPg6000-120-NM 115Vac + Net Man card, nom.
VPg6000-120-aNM 115Vac + Net Man card, nom.
VpG6000Dc power SuppLyVPg6000-48 -48VDc
VPg6000-48-NM -48VDc + Net Man card
VPg6000-48-aNM -48VDc + Net Man card
6000ch FiLLer paneLSVPg6000FP-1 i/O module one-slot filler panel kit
VPg6000FP-3 i/O module three-slot filler panel kit
VPg6000FP-PS PSu slot filler panel kit
1.3
braVONeT
5Ru modular universal Chassis System
vPg6000
• Symmetricalarchitectureforslotindependence•Mid-planedesignenablesmix-and-matchofmodulesandconnections•Chassisacceptsuptosixstandardaudio/videotransportmodulesdesigned
for the braVOnet™ product line• RedundantACorDCpowersupplysystemwithload-sharingandsupply
line redundancy• Elementmanagementmoduleismountedonthepowersupply,savinga
chassis slot•Chassis-mountedwavelengthdivisionmultiplexerfortwoorfour
wavelength systems
chassis and Power Supply
Power Modules Signal Modules
Backplane
ConnectorPanels
PowerInputs Signal I/Os
Power BusNetworkManagementBus
Network Management I/O
Net MgmtModule
86 | network-electronics.com
FCS6000 aEmS (advanced Element management System)
FCS6000 aEmS
element Management
braVONeT
1.3
The FcS6000 aeMS is a linux-based element management card managing the braVOnet series cards. it acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FcS6000 aeMS can be configured to control other cards using a remote and secure Telnet session.
The FcS6000 aeMS is located within a power supply slot and is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. it uses residual power to save the data and shuts down in a controlled manner.
• Automaticrecognition,controlandoperationoflinecards•WebbrowserandSNMPbasedmonitoringandcontrolling• RemotefirmwaredownloadusingremoteandsecureTelnetsession•DatetimestampedhistoryanddatarecordinginFlashmemory(buffer)• ChassisEnvironmentreportingusingtemperatureandfanspeedsensor
(leD indicators)•On-boardMicroprocessordetails:100MIPS,32-bitRISCbasedSoC,
external 128Mb flash and 64Mb SDraM• Safeoperationtransfertoupdatedfirmware(startsusingnewfirmware
after validation)• Linux-basedsystem•Userdefinablealarmsbasedonpriority(major,minorornoalarm)
RJ-45
IDC-50PC Lines
andAlarms
RS232 (x2)
Backplane
Connectorpanel
EthernetTransformer
PC and AlarmProcessing
Linux basedsingle boardcomputer
32-bit SoC100MIPS
Serial Ports
128Mb Flash
64Mb SDRAM
Power Conversion
DIPSwitch
FrontPanelLEDsand
RJ-45
ProgrammableGeneral Purpose I/O
FCS6000-AEMS
VPG Advanced Element Management System
GPIO (8 I/Os)
FANS
VPG6000 chassis
POWER
#2
POWER
#1
AEMS
SLOT
#1
SLOT
#2
SLOT
#3
SLOT
#4
SLOT
#5
SLOT
#6
network-electronics.com | 87
element Management 1.3
braVONeT
FCS6000 aEmS
SNMP agent #1
SNMP agent #N
Web server #X
BRAVOnet
AEMS
SNMPagent
Network
SNMP manager #1
SNMP manager #N
Inform
Web manager #X
Web browserWeb browser
Get, Set
Inform
Get, Set
FCS6000 aEmS aS SNmP agENt a single FcS6000 aeMS acts as the proxy agent for up tp 9 Ventura line cards, 2 power supplies and the fan assembly placed in the VPg6000 chassis.
ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for braVOnet Series cards installed in a VPg6000 chassis. Some of the features are given below: -SNMP V2c ready -Telnet based remote and secure login -remote firmware downloads
aEmS SyStEm LOCatIONMechanically mounted on Power Supply #1 providing electrical connection to back plane of chassis. Does not consume a VPg6000 slot.
ENvIRONmENtaL/COmPLIaNCEOperating temperature 0 °c to + 50 °c
Storage temperature –10 °c to + 70 °c
Humidity 20%–80%, non-condensing
eMc compliance Fcc, ceSafety compliance ul, cSa, ce
CONNECtOR tyPESethernetTelnet remote linux system configuration
FTP Firmware downloads
HTTP Web browser access
SNMP element Management
connector rJ45 10/100 Mbps
No. of connectors Single access rear interface
Password levels administrator/user
Operating Systems Windows 98, 2000 Pro, XP Pro and linuxWeb browser internet explorer 6.0
Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported)
RS232 / EIa232 (FOR LINuX SyStEm CONFIguRatION)connector Db9 (male)
No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits,
no parity
gPIOTo interface Ventura chassis with user’s equipment
connector Micro-D 9-pinNo. of connectors 1, with 8 user configured,
TTl compatible i/O lines
ORdERINg OPtIONSFcS6000 aeMS advanced element Management System
card
gPiO cable FcS6000 aeMS general purpose input/output card connector cable
88 | network-electronics.com
Monitoring and Test System1.3
dvB-aSI/SdI monitoring and test System
FCS1000
FcS100 provides a high-density, cost-effective QoS monitoring solution.
each input has a 270Mbps interface, allowing monitoring of either DVb-aSi signals or serial digital video signals. Service management is provided via an embedded Pc-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. all alarm conditions can be mapped into SNMP traps as well as individual gPi outputs for local alarms.
• In-servicemonitoringforupto16channelsin1RU•DVB-ASIorSMPTE259SDIcapable•CheckingofallDVBinputstreamstoETR101290•CheckingtoSMPTERP165onSDIinputstreams•High-impedancepassive‘BNCTee’foreachchannel• ComprehensiveSNMPtrapsandinforms• SeparateGPIcontactalarmsforeachchannel• Fullinternaldiagnostics• ASIstreamhandlingfrom16Kbps–216Mbps• 10/100baseTEthernetmanagementport• SerialportcommunicationsforlocaldiagnosticsandISDN/PSTNadapters• Powerfulalarmfilteringandlogging•QoSprofilepresetsandweeklyscheduling• Remoteuploadsofnewschedulesandfirmwareupgrades
braVONeT
network-electronics.com | 89
Monitoring and Test System 1.3
OPERatIONbrowser based, multi-channel, menu-driven QoS monitoring system. configurable for SDi or aSi in groups of four. a set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTe rP165 or eTr 101290.
up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.
an alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. individual channel SNMP informs are generated and sent based on the settings of this screen.
dvB-aSI mONItORINg SmPtE 259m SdI mONItORINgeTr 101 290 SMPTe rP165
Signal present Signal present
TS sync loss eDH–missing
TS sync byte errors eDH–packet error
PaT error active picture (aP) eDH error here
continuity count error aP error detected already
PMT error aP unknown error status
PiD error Full field (FF) error detected here
Pcr error / accuracy FF error detected already
caT error FF unknown error status
NiT error ancillary (aNc) error detected here
SDT error aNc error detected already
eiT error aNc unknown error status
rST error Other alarms
TDT error Video black
rS Fec error Freeze framecontinuity count audio (group error, silence, phase and
overload)
POWER aNd ENvIRONmENtaLPower automatic 110~240 V ac, iec connector
Power consumption 0.15a , 240Vac, <35W
cooling Forced via side intake and exhaust vents
Operating Temperature between 0 °c and 50 °cOperating Humidity 10% to 90% (non-condensing)
ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls. Some of the features are:- SNMP V2c ready- Telnet based remote and secure login- remote firmware downloads
CONNECtOR tyPESethernetTelnet remote linux system configuration
FTP Firmware downloads
HTTP Web browser access
SNMP element management
connector rJ45 10Mbps
No. of connectors Single access (16 channels)
Password levels administrator/user
Operating Systems Windows 98, 2000 Pro, XP Pro and linuxWeb browser internet explorer 6.0
Netscape Navigator 7.2rS232 / eia232For linux System configuration (two connectors, front and rear access)
connector Db9 (male)
No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits, no
parityGpioTo interface Ventura chassis with user’s equipment
connector DSub-25 pinNo. of connectors 1, with 16 TTl compatible i/O lines
PHySICaLWidth Front panel: 19” eia standard
(483mm) (exc. rack ears: 440m)
Height 1.7” (43mm), 1ru
Depth 19” (484mm) (including rear connectors)Weight 11lbs. (5kg) (6kg with delivery packing)
ORdERINg OPtIONSFcS1000 Focus Monitoring and Test System
dvB-aSI/SdI monitoring and test System
FCS1000
braVONeT
90 | network-electronics.com
Stm-1/OC-3 dvB-aSI tS multiplexer – Bandwidth Optimizer
vPg9155
aSi Multiplexer/Network adapter
braVONeT
1.3
The VPg9155 MuX/DeMuX interoperates with other VPg products to form a layered approach to multiplexing and network interfacing ranging from e3/DS-3, Oc-3, to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPg9155 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 155Mbps or 140Mbps carrier.
•MultiplexesfourDVB-ASIinputsintooneOC-3/STM-1/STS-3(155Mbps)or e4 (140Mbps) output
•MaximizesASIpayloadcapacity(upto148Mbpsovera155Mbpsnetwork)• Inputscanbeswitchedtoanyoutput•UsedwithVPG6000/6200chassissystemsunderstandardorAEMS
(advanced element Management System)• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity
available to client (to a resolution of 0.1Mbps per TS) •DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2
transmission• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure
content delivery
network-electronics.com | 91
aSi Multiplexer/Network adapter 1.3
braVONeT
vPg9155
muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9 or aSi*,
containing data from 800kbps up to 148Mbps
Maximum Payload e4 (140Mbps) 135Mbps Oc-3/STM-1 148Mbps
Number of inputs 4
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputs
cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes
muX – OutPut SIgNaLSOutput signal type 155Mbps–Oc-3c / STM-1
155Mbps–STS-3 (electrical) 140Mbps–e4-g.703 (electrical)
Number of outputs 1 x optical (STM-1 / Oc-3) plus 2 x electrical (STS-3 / e4)
input/output levels (elec) 800mV(pk-pk)
input impedance (elec) 75 Ohm, with loop-through capability
Output impedance (elec) 75 Ohm, dual outputsOptical 1310nm /1550nm single-mode
(launch power -3dbm min)
dEmuX – INPut SIgNaLSinput signal type 155Mbps–Oc-3c / STM-1
155Mbps–STS-3 (electrical) 140Mbps–e4-g.703
Number of inputs 2 x electrical (STS-3 / e4) plus 1 x optical (STM-1 / Oc-3)
Optical PiNFeT (-32bbm sensitivity)
dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi–eN50083-9
Number of outputs 4 x 270Mbps plus 2 x loop-through STS-3 / e4
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputscable equalizer (max) 200m of belden 8281 cable
POWER CONSumPtION/ ENvIRONmENtaLVPg9155TX/rX <20W (all options)
Operating temperature 0 °c to + 50 °c
Storage temperature -10 °c to + 70 °cHumidity 20%–80% rH, non-condensing
ELEmENt maNagEmENt / aLaRmS muX CONtROLS
input rate setting ch 1 to 4–input bit rate ceiling, set to a resolution of 0.1Mbps
rS Fec ch 1 to 4–add / don’t add
DVb checking ch 1 to 4–check for PiD, PaT, PMT, SeS or eS errors
DVb error threshold Sets thresholds for alarms
Output mode Selects network interface type
Optical laser On or Off (where fitted)channel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
muX aLaRmS (SEt aS EItHER; NONE, maJOR OR mINOR)card fail card fault
laser fail Optical module fault
input loss ch 1 to 4–no input
input rate violation ch 1 to 4–allowable input bit rate exceeded
configuration error Wrong input type selectedDVb error channel 1 to 4–rS, PiD, PaT, PMT, SeS or eS
errors
dEmuX CONtROLSStandby protection switch enable or disable automatic network standby
switching
Optical loss only switch enable or disable switching to main electrical input when optical input is lost
Switch persistence error persistence to enable protection switch to operate
input mode Selects network interface type
Mode selected electrical or optical
ber threshold Sets ber alarm threshold
Non-consec. error Network error thresholdchannel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
dEmuX aLaRmS (SEt aS EItHER; NONE, mINOR OR maJOR)
card fail card fault
Optical loss input power threshold too low
input loss loss of frame alignment
configuration error ch 1 to 4–error in data type or conditional access code
input errors ch 1 to 4–rate exceeds programmed thresholds
Standby input selected Standby network input is being used by DeMuX
DVb error channel 1 to 4–rS, SeS errors
ORdERINg INFORmatIONVPg9155rX-00 aSi DeMux, STS-3
VPg9155rX-Oe aSi DeMux, STS-3 + STM-1/Oc-3c Pinfet receiver
VPg9155TX-00 aSi Mux, STS-3
VPg9155TX-SFP-eO aSi DeMux, STS-3 + STM-1/Oc-3c laserPlease refer to the SFP Options data sheet for SFP selection.
92 | network-electronics.com
dS3/E3 dvB-aSI tS multiplexer – Bandwidth Optimizer
vPg9345
aSi Multiplexer/Network adapter
braVONeT
1.3
The VPg9345 MuX/DeMuX is one of many DVb-aSi and SDi networking products in the VPg9500 series. These products form a layered approach to multiplexing and network interfacing from e3/DS-3, Oc-3, to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. Designed with the service provider in mind, the VPg9345 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 34Mbps or 45Mbps circuit.
•MultiplexesfourDVB-ASIinputsintooneDS3(45Mbps)orE3(34Mbps)output
•MaximizesASIpayloadcapacity(upto43.8Mbpsovera45Mbpsnetwork)• Inputscanbeswitchedtoanyoutput• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity
available to client (to a resolution of 0.1Mbps per TS) •DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2
transmission• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure
content delivery
network-electronics.com | 93
aSi Multiplexer/Network adapter 1.3
braVONeT
vPg9345
muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9 or aSi*,
containing data from 800kbps up to 43.8Mbps
Maximum Payload DS3 43.8Mbps e3 33.9Mbps
Number of inputs 4
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputs
cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes.
muX – OutPut SIgNaLSOutput signal type 45Mbps–DS3 (b3ZS)
34Mbps–e3 (HDb3)
Number of outputs 2 x electrical plus 1 x optical (where fitted)
input/output levels (elec) 800mV(pk-pk)
input impedance (elec) 75 Ohm, with loop-through capability
Output impedance (elec) 75 Ohm, dual outputsOptical 1310nm / 1550nm single-mode
(launch power -3dbm min) cWDM or DWDM
dEmuX – INPut SIgNaLSinput signal type 45Mbps–DS3 (b3ZS)
34Mbps–e3 (HDb3)
Number of inputs 2 x electrical plus 1 x optical (where fitted)
Optical (optional) PiNFeT (-32dbm sensitivity)
dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi–eN50083-9
Number of outputs 4 x 270Mbps plus 2 x loop-through DS3 / e3
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputscable equalizer (max) 200m of belden 8281 cable
POWER CONSumPtION/ENvIRONmENtaLVPg9345TX/rX <20W (all options)
Operating temperature 0 °c to + 50 °c
Storage temperature -10 °c to + 70 °cHumidity 20%–80% rH, non-condensing
ELEmENt maNagEmENt/aLaRmS muX CONtROLS
input rate setting ch 1 to 4–input bit rate ceiling, set to a resolution of 0.1Mbps
rS Fec ch 1 to 4–add / don’t add
DVb checking ch 1 to 4–check for PiD, PaT, PMT, SeS or eS errors
DVb error threshold Sets thresholds for alarms
Output mode Selects network interface type
Optical laser On or Off (where fitted)channel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
muX aLaRmS (SEt aS EItHER; NONE, maJOR OR mINOR)card fail card fault
laser fail Optical module fault
input loss ch 1 to 4–no input
input rate violation ch 1 to 4–allowable input bit rate exceeded
configuration error Wrong input type selectedDVb error channel 1 to 4–rS, PiD, PaT, PMT, SeS or eS
errors
dEmuX CONtROLSStandby protection switch enable or disable automatic network standby
switching
Optical loss only switch enable or disable switching to main electrical input when optical input is lost
Switch persistence error persistence to enable protection switch to operate
input mode Selects network interface type
Mode selected electrical or optical
ber threshold Sets ber alarm threshold
Non-consec. error Network error thresholdchannel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
dEmuX aLaRmS (SEt aS EItHER; NONE, mINOR OR maJOR)
card fail card fault
Optical loss input power threshold too low
input loss loss of frame alignment
configuration error ch 1 to 4–error in data type or conditional access code
input errors ch 1 to 4–rate exceeds programmed thresholds
Standby input selected Standby network input is being used by DeMuX
DVb error channel 1 to 4–rS, SeS errors
ORdERINg INFORmatIONcontact factory for ordering information.
94 | network-electronics.com
SdI/dvB-aSI tS multiplexer – Sub-multiplexer/Bandwidth Optimizer
vPg9500
aSi Multiplexer/Network adapter
braVONeT
1.3
The VPg9500 MuX/DeMuX interoperates with other VPg products to form a layered approach to multiplexing and network interfacing ranging from e3/DS3, Oc-3 to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPg9500 can be used as a companion card with the other family members performing the function of sub-multiplexing for aSi bandwidth optimizing or multiplexing into SDTi for adapting to fiber metropolitan or SDi long-distance networks.
•MultiplexesfourDVB-ASIinputsintoone270MbpsASIorSDTI(SMPTE305) output
•MainlyusedasaSub-MuxtoincreasethenumberofTSinputstoVPg9345, VPg9155 or VPg9555
• Inputscanbeswitchedtoanyoutput•UsedwithVPG6000/6200chassisunderstandardorAEMS(Advanced
element Management System)• EachinputTScanbeupto178Mbps• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity
available to client (to a resolution of 0.1Mbps per TS)•DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2
transmission• Reed-Solomoncheckingforeachinputandoutput• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure
content delivery
network-electronics.com | 95
aSi Multiplexer/Network adapter 1.3
braVONeT
vPg9500
muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9, or aSi*,
containing data from 800kbps up to 178Mbps
Maximum Payload SDTi 178 aSi* 178
Number of inputs 4
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputs
cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes
muX –OutPut SIgNaLSOutput signal type 270Mbps aSi*, or SDTi plus optical (where
fitted) containing data up to 179.5Mbps
Number of Outputs 2 x electrical plus 1 x optical (where fitted)
input/output levels (elec) 800mV(pk-pk)
input impedance (elec) 75 Ohm, with loop-through capability
Output impedance (elec) 75 Ohm, dual outputs
Optical 1310nm /1550nm single mode (launch power -3dbm min)
aSi* Submux aSi Packets 192/208 bytes
dEmuX – INPut SIgNaLSinput signal type 270Mbps aSi*, or SDTi plus optical
(where fitted)
Number of inputs 2 x electrical plus 1 x optical (where fitted)Optical PiNFeT (-32bbm sensitivity)
dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi
Number of outputs 4 x 270Mbps plus 2 x 270Mbps input loop-through SDTi
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputs
cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes
POWER CONSumPtION/ ENvIRONmENtaLVPg9500TX/rX <20W (all options)
Operating temperature 0 °c to +50 °c
Storage temperature -10 °c to +70 °cHumidity 20%–80% rH, non-condensing
ELEmENt maNagEmENt / aLaRmS muX CONtROLS
input rate setting ch 1 to 4–input bit rate ceiling, set to a resolution of 0.1Mbps
rS Fec ch 1 to 4–add / don’t add
DVb checking ch 1 to 4–check for PiD, PaT, PMT, SeS or eS errors
DVb error threshold Sets thresholds for alarms
Output mode Selects aSi or SDTi
Optical laser On or Off (where fitted)channel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
muX aLaRmS (SEt aS EItHER; NONE, maJOR OR mINOR)card fail card fault
laser fail Optical module fault
input loss ch 1 to 4–no input
input rate violation ch 1 to 4–allowable input bit rate exceeded
configuration error Wrong input type selectedDVb error channel 1 to 4–rS, PiD, PaT, PMT, SeS or eS
errors
dEmuX CONtROLSStandby protection switch enable or disable automatic network
standby switching
Optical loss only switch enable or disable switching to main electrical input when optical input is lost
Switch persistence error persistence to enable protection switch to operate
input mode Selects aSi or SDTi
Mode selected electrical or optical
ber threshold Sets ber alarm threshold
Non-consec. error Network error thresholdchannel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
dEmuX aLaRmS (SEt aS EItHER; NONE, mINOR OR maJOR)
card fail card fault
Optical loss input power threshold too low
input loss loss of frame alignment
configuration error ch 1 to 4–error in data type or conditional access code
input errors ch 1 to 4–rate exceeds programmed thresholds
Standby input selected Standby 270Mbps input is being used by DeMuX
DVb error channel 1 to 4–rS, SeS errors
ORdERINg INFORmatIONVPg-9500-TX aSi SubMux card
VPg-9500-rX aSi SubDeMux card
96 | network-electronics.com
OC-12/Stm-4 SdI/SdtI/dvB-aSI atm multiplexer
vPg9000
aSi/SDi 270 Multiplexer/Network adapter
braVONeT
1.3
The VPg9000 622Mbps SDH/SONeT Video Multiplexer is a time division multiplexer that has been engineered to combine two 270Mbps video tributary signals onto an Oc-12/STM-4 carrier. each 270Mbps tributary may be formatted as an SDi, SDTi or DVb-aSi signal, enabling the simultaneous transport of multiple compressed and uncompressed digital video signals.
•DesignedfortransportingSDIvideosignalsoveraSONET/SDHinfrastructure
•Multiplexestwouncompressed270Mbps• SMPTE259M/ITU-R601feedsinto622Mbps• ATMcompatibletransportinterface• Tributaryinterfacesallowremotefiber-opticornetworkconnectiontothe
backbone multiplexer• AccommodatesallVPGaudioandformatconversionmodules•OptionalwavelengthmultiplexingpermitsuptofourSDIsignalsonthe
same fiber• AdvancedElementManagementSystemwithEDHsupport
MultiplexerProcessing and
Output Formatting OC-12/STM-4
LaserTX
Line 1
Line 2
OC-12C/STM-4
StreamProcessing
VPG9000 TX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter
DVB-ASISource
DVB-ASISource
StreamProcessing
StreamProcessing
STS-12C(Electrical)
DemultiplexerProcessing and Output DecodingOC-12/STM-4
PINFETRX
Line 1 (Main)
Line 2 (Standby)
OC-12C/STM-4(Optical)
VPG9000 RX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter
DVB-ASIReceiverDVB-ASIReceiver
STS-12C(Electrical)
network-electronics.com | 97
aSi/SDi 270 Multiplexer/Network adapter 1.3
braVONeT
vPg9000
gENERaLinput signal types 270Mbps SDi (SMPTe 259M),
SDTi (SMPTe 305M), or DVb-aSi (eN50083-9)
No. of channels Two
270mBpS eLectricaL (coaXiaL)input/output levels 800 mVpp, with loopthrough capability
input impedance 75 Ohm
Output impedance 75 Ohm, dual outputscable equalizer max. lth. 300m of belden 8281 cable
270mBpS opticaLWavelength 1310nm or 1550nm
coding Scrambled or non-scrambled
Fiber type Singlemode
launched power -3dbm ±1db
received sensitivity -32dbm, typ.Maximum input –1dbm for 10-9 ber
eXternaL network reFerence cLockconsult factory for options.
LINkData rate 622.08Mbps
Physical interfaces electrical STS-12c compliantOptical Oc-12c/STM-4 compliant
POWER CONSumPtIONVPg9000TX <25WOptical Option <1W per module
ENvIRONmENtaL/COmPLIaNCEOperating temperature 0 °c to +50 °c
Storage temperature -10 °c to +70 °c
Humidity 20%–80% rH, non-condensing
eMc compliance Fcc, ce
Safety compliance ul, cSa, ce
advaNCEd ELEmENt maNagEmENtStatus, control, and alarm messages can be sent to the element management software. These messages include:
VPg9000TX Status Module present/absent Option(s) present/absent Module location/iD/serial number control Set module location/iD laser enable enable/disable scrambling alarm loss of video input Video errors (eDH support) Module fail Optical source fault/bias deviation (link) Optical power fault/low light fault (SDi)
VPg9000rX Status Module present/absent Option(s) present/absent Module location/iD/serial number control Set module location/iD laser enable enable/disable descrambling alarm loss of link Video errors (eDH support) Module fail Optical power fault/low light fault (link)Optical source fault/bias deviation (SDi)
ORdERINg INFORmatIONVPg9000TX-00-21 aTM mux card, Oc-12/STM-4
VPg9000rX-00-20 aTM demux card, Oc-12/STM-4
98 | network-electronics.com
SdI/dvB-aSI tS multiplexer – Sub-multiplexer/Bandwidth Optimizer
vPg9500
aSi/SDi 270 Multiplexer/Network adapter
braVONeT
1.3
The VPg9500 MuX/DeMuX interoperates with other VPg products to form a layered approach to multiplexing and network interfacing ranging from e3/DS3, Oc-3 to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPg9500 can be used as a companion card with the other family members performing the function of sub-multiplexing for aSi bandwidth optimizing or multiplexing into SDTi for adapting to fiber metropolitan or SDi long-distance networks.
•MultiplexesfourDVB-ASIinputsintoone270MbpsASIorSDTI(SMPTE305) output
•MainlyusedasaSub-MuxtoincreasethenumberofTSinputstoVPg9345, VPg9155 or VPg9555
• Inputscanbeswitchedtoanyoutput•UsedwithVPG6000/6200chassisunderstandardorAEMS(Advanced
element Management System)• EachinputTScanbeupto178Mbps• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity
available to client (to a resolution of 0.1Mbps per TS)•DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2
transmission• Reed-Solomoncheckingforeachinputandoutput• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure
content delivery
network-electronics.com | 99
aSi/SDi 270 Multiplexer/Network adapter 1.3
braVONeT
vPg9500
muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9, or aSi*,
containing data from 800kbps up to 178Mbps
Maximum Payload SDTi 178 aSi* 178
Number of inputs 4
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputs
cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets192/208 bytes
muX – OutPut SIgNaLSOutput signal type 270Mbps aSi*, or SDTi plus optical (where
fitted) containing data up to 179.5Mbps
Number of Outputs 2 x electrical plus 1 x optical (where fitted)
input/output levels (elec) 800mV(pk-pk)
input impedance (elec) 75 Ohm, with loop-through capability
Output impedance (elec) 75 Ohm, dual outputs
Optical 1310nm /1550nm single mode (launch power -3dbm min)
aSi* Submux aSi Packets 192/208 bytes
dEmuX – INPut SIgNaLSinput signal type 270Mbps aSi*, or SDTi plus optical
(where fitted)
Number of inputs 2 x electrical plus 1 x optical (where fitted)Optical PiNFeT (-32bbm sensitivity)
dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi
Number of outputs 4 x 270Mbps plus 2 x 270Mbps input loop-through SDTi
input/output levels 800mV(pk-pk)
input impedance 75 Ohm, with loop-through capability
Output impedance 75 Ohm, dual outputs
cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes
POWER CONSumPtION/ ENvIRONmENtaLVPg9500TX/rX <20W (all options)
Operating temperature 0 °c to +50 °c
Storage temperature -10 °c to +70 °cHumidity 20%–80% rH, non-condensing
ELEmENt maNagEmENt / aLaRmS muX CONtROLS
input rate setting ch 1 to 4–input bit rate ceiling, set to a resolution of 0.1Mbps
rS Fec ch 1 to 4–add / don’t add
DVb checking ch 1 to 4–check for PiD, PaT, PMT, SeS or eS errors
DVb error threshold Sets thresholds for alarms
Output mode Selects aSi or SDTi
Optical laser On or Off (where fitted)channel iD codes ch 1 to 4–Sets each TS’s conditional access
codes (2)
muX aLaRmS (SEt aS EItHER; NONE, maJOR OR mINOR)card fail card fault
laser fail Optical module fault
input loss ch 1 to 4–no input
input rate violation ch 1 to 4–allowable input bit rate exceeded
configuration error Wrong input type selectedDVb error channel 1 to 4–rS, PiD, PaT, PMT, SeS or eS
errors
dEmuX CONtROLSStandby protection switch enable or disable automatic network
standby switching
Optical loss only switch enable or disable switching to main electrical input when optical input is lost
Switch persistence error persistence to enable protection switch to operate
input mode Selects aSi or SDTi
Mode selected electrical or optical
ber threshold Sets ber alarm threshold
Non-consec. error Network error thresholdchannel iD codes ch 1 to 4-–Sets each TS’s conditional access
codes (2)
dEmuX aLaRmS (SEt aS EItHER; NONE, mINOR OR maJOR)
card fail card fault
Optical loss input power threshold too low
input loss loss of frame alignment
configuration error ch 1 to 4–error in data type or conditional access code
input errors ch 1 to 4–rate exceeds programmed thresholds
Standby input selected Standby 270Mbps input is being used by DeMuX
DVb error channel 1 to 4–rS, SeS errors
ORdERINg INFORmatIONVPg-9500-TX aSi SubMux card
VPg-9500-rX aSi SubDeMux card
100 | network-electronics.com
aSI/SdI dual-Channel Intelligent Slipless Switch
vPg7700
aSi/SDi Protection Switching
using patented techniques, the VPg7700 aSi/SDi Dual-channel intelligent Slipless Switch provides full transport stream protection for digital television networks.
With comprehensive Tr 101 290 real-time analysis, the quality of both the primary and backup transport streams is available for any switching decisions. by performing feed-forward switching, TS packet alignment is guaranteed throughout the switching process. unique patented packet and clock synthesis with programmable duration can also be enabled to bridge disruptions to both transport streams.
• TwofullyindependentDVB-ASI/SDIswitchespercard.•Dualinputsanddualoutputsoneachswitch.• Patented,packetsliplessswitchingtechniqueswithlookaheadbufferingto
maintain TS synchronization. •Discontinuityflagsetonswitching.• ByteandpacketstuffedASImodessupported.• AccommodatesanysizeTSbetween850Kbpsand160Mbps.• 75ohmcoaxialinterfacesandtwobufferedmonitorpointsperswitch.• IncomingstreamanalysiswithRSForwardErrorCorrectionverification.• 188to204bytepacketconversioncapability.• Comprehensiveswitchingalgorithmswith1second,1minuteand10
minute windows. • Proactiveswitchingonlossofsignal,TSsynclossanderrorconditions.• Reactiveswitchingonlongtermerrorconditions.• Patentedpacketandclocksynthesisforbridgingdiscontinuoustraffic.
braVONeT
1.3
network-electronics.com | 101
aSi/SDi Protection Switching
vPg7700
OPERatION The VPg7700 switch is used to provide intelligent slipless switching of aSi transport stream packets. it provides unequalled network redundancy protection and is almost insensitive to differential delays between paths as it operates to ensure packet alignment and continuity. in the single-redundant mode of operation, the VPg7700 contains two fully independent channels that can be used to protect two individual transport streams. in the dual-redundant mode, the product can be cross-connected with another VPg7700 to provide both hardware and power feed redundancy. in both modes of operation, the element management interface is used to select the switching criteria, which can extend from simple loss of signal to profile switching based on Tr 101 290 analysis. Packet synthesis can be enabled to maintain packet continuity during disruptions to both streams, which is not uncommon if the transport stream is switched prior to entering the transport network. The packet synthesis duration is programmable up to ten seconds.
SPECIFICatIONSTheVPG7700supportstwoseparatemodesofoperation;DVB-ASImodeand SDi mode.
DVB-aSi SDiinterface eN50083-9 SMPTe 259MMeasurement Tr 101 290 SMPTe rP 165
aLaRm CONdItIONSFiXeD aLarmSDVB-aSi moDe SDi moDe loss of signal loss of signal communication fail communication fail
card fail card fail alternative input selected alternative input selectedconfiguration error configuration errorproGrammaBLe aLarmSDVB-aSi moDe SDi moDeDVb errors TrS errors DVb SeS 1 minute eDH errors DVb SeS 10 minute eDa errors rS errors iDa errors continuity error Freeze frame linearity error audio missing PiD profile mismatch audio silence
aLaRm CONdItIONINgeach alarm condition can be programmed to different levels of severity and switching can be withheld until a preprogrammed persistence of an alarm condition is reached. in this way, chattering and unwanted switching conditions are avoided.
Severity levels Disabled, log only, information, warning, minor, major, critical
Persistence Persistence may be set to any value and is used to filter unwanted short-duration alarms.
FRONt PaNELinDicatorS – LeDS· Power present (Yellow)
· card fail (red)
· channel present 1a (green)
· channel present 1b (green)
· channel present 2a (green)
· channel present 2b (green)
· alarm 1a (red)
· alarm 1b (red)
· alarm 2a (red)· alarm 2b (red)monitor pointSFour buffered 75-ohm SMc connectors are provided on the front panel to monitor the main and alternate outputs of each channel.
ELEmENt maNagEmENtThe VS7700 is compatible with the VPg6000 braVOnet™ aeMS (advanced element Management System). This is a Web browser based monitoring and control system with comprehensive SNMP support.
the FoLLowinG can Be controLLeD Via the network manaGement interFace:configuration aSi/SDi
Switching mode of operation Force 188 output PiD profile auto reversion time Packet synthesis timeout
alarms Priority level (see alarm severity table) Persistence time Hold time
These are all programmed through the Web page. Their values depend on the network configuration and conditions. Preset values can be loaded from a configuration file. all configurations can be changed through the “edit config” Web page, and its associated pages.
hiStory LoGGinGa deep history log of all events is maintained and accessible through the History Web page. The alarm Statistics page provides “errored seconds” analysis for each alarm event.
Snmp compatiBiLityan SNMP Mib conforming to SNMP V2 and V3 is supported through the VPg aeMS management platform.
ORdERINg OPtIONSThe VPg7700 is supplied with a connector panel. There are no specific configurations of this product. The ordering code is VPg7700 aSi/SDi dual channel slipless switch.
1.3
braVONeT
VikinX compact
Since the conception of Network electronics, we have provided affordable, compact, energy efficient, high quality products. This philosophy is very much alive, and we continue to bring excellent products with advanced design into the market.
Our product portfolios, VikinX and Flashlink, have set new industry standards and have achieved many awards for modern design and excellent engineering year after year.
vIkINXThe VikinX products represent our routing range and have three different entry points ...
The industry standard VikinX Compact series, for over 10 years, is the router for both entry level and broadcasters.
The VikinX Sublime series provides the next generation technologies including ethernet control, 3gbps Single link support for 1080P High Definition TV, and ultra low power consumption. VikinX Sublime is the router for all users appreciating these features – including top end broadcasters.
... and the flexible VikinX Modular series, joined by the newest member, the 256x256 High Definition router.
Alltheseseriesinterconnect;sharingsoftwareconfiguration,control and monitoring applications, providing legacy and growth paths appreciated by both our new and existing customers.
Network electronics is proud of our ability to offer a complete range of routing solutions. Network electronics is a strong, trusted partner to our customers around the world.
The concept
broadcast and Telco formats covered in our routing products:3gHD, HD, SDi, aeS, analog Video & audio, Time code, rS-422, 34/45 Mbps, 140-155 Mbits and g703.
VikinX Modular
VikinX Sublime
network-electronics.com | 103
FLaSHLINkThe Flashlink product range covers all signal processing and distribution equipment for the fiberoptic domain and comes with several innovative housing solutions.
The processing and distribution products are capturing market prominence with a complete line of products that will do the job that they are intended for, simply and straight forward and maintenance free with a technical passion that makes this high performance range stand out from the crowd.
it could be simply video or audio distribution or change over switching or frame synchronizers, what ever your product desires are we can satisfy your wishes.
Flashlink is known for being well engineered, simple for the user and ultra reliable with a cost performance advantage.
For many years the Flashlink product range has led the industry and has become the industry standard for fiber transport systems in the broadcast and video transport arenas.
From a simple one channel fiber system up to 40 channels of uncompressed data or broadcast signal formats on one fiber, Flashlink is known world wide for its innovative transport system and control system possibilities including SNMP on all products.
Synchronisation, Delay, Multiplexing, converters, Distribution amplifiers, change over switching
HD-SDi, SD-SDi, aeS, analog Video and audio, 10/100/1000Mbps ethernet, rS-422, gPiO, l-band, TDM, SDi Time Division Multiplexers, SDH/SONeT up to STM16/Oc-48, DVb-aSi, fiber channel, iP Transport systems for Video over iP, 3r regeneration, cWDM and DWDM system platforms and many others
rack mount, studio facilities, Ob vans:Flashlink Fr-2ru 19” frame for up to 10 modules and dual power supply
Mobile use, outside broadcast (Ob), events MOT-bOX, lightweight rugged housing for Flashlink Fr-2ru frame
Stand-alone: N-bOX single module frame
SIgNaL FORmatS SuPPORtEd By FLaSHLINk…•UncompressedSD-SDI/HD-SDI/3G-SDI•NTSC/PAL• Analogaudioandvideo• AESandMADI• E4,STM1-16,OC3-48•DVB-ASI,M2S(Divicom),SMPTE310M,SDTI• RS-422,GPI/GPO• 10/100/1000MbpsEthernet• FiberChannel• AnalogL-bandsignals
FuNCtIONS INCLudEd…• SD-SDI/HD-SDIandAESembedding/de-embeddingwithanalog
signal support• SD-SDIandHD-SDI2x1changeovermodules•Distributionamplifiersinallflavours•HD-SDdown-conversion• ElectricaltoOpticalandOpticaltoElectricalmediaconversion• Fiberopticalsignaldistributionandautomaticprotection
switching•Opticalmultiplexing,WDM,CWDMandDWDM• 3R-regenerationofopticalsignalswithwavelengthscheme
swapping• Electricalmultiplexing,TDM•AEStoanalogaudioandanalogaudiotoAESconversion• SDItoNTSC/PALencoding,10-bitand8-bitversion•NTSC/PALtoSDIdecoding• Lineandframesynchronization• SystemControllerwithwebandSNMPsupport
Signal Transport, Processing and Distribution
network-electronics.com |
Flashlink Overview
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
105
Feature Function Benefit
Multiformat broadcast, Telecom and Datacom
platform
Dedicated modules for different signals
formats, the Mr-Tr range supports all
formats optically
Offer one or more of these services with
potential future expansion with the same
platform
Single mode and multi mode compatible Multi mode fiber on receivers allow for use
with single or multi mode fibers
install new fiber cables or use existing
infrastructure
gYDa-Sc System controller with TcP/iP web
interface
Dynamic web site generation by system
controller gives access to remotely control
and configure system
use web interface for full access to installed
system from control site, no special software
needed
all Flashlink modules have Simple Network
Management Protocol support via gYDa-Sc
gYDa-Sc operates as an SNMP agent easy integration into larger control systems
using SNMP
extensive monitoring possibilities gPi output, front card leDs and rS-422
control
Tailor monitoring to existing studio needs
Hot-swappable architecture change modules without powering down
system
little or no down-time on running services
Modular and easily expandable system 10 slots per Frame, hot swappable, add
modules without powering down on-air
frames
grow with the system, no need for huge
initial investments
Supports pathological video patterns without
scrambling
extremely good low frequency response robust signal transport system
any wavelength scheme, 1310nm and 1550nm,
cWDM and DWDM
add the number of wavelengths needed
per fiber according to current needs
Flexible system design, tailored for specific
customer needs
Very compact 2ru rack mount solution industry leading rack size compactness Saves rack space with increased packing
density
Dual redundant power supply load sharing ensures working frame as
long as more than one of the two powers
operate normally
lower risk for power loss during critical
operations
ac and/or Dc power supply ac and/or Dc operation Maximum power redundancy, flexible power
sources
extremely low power consumption No fans needed, better reliability less maintenance, reduced operating cost,
longer lifetime
See for yourself how you can benefit from the extensive features of the Flashlink system:
106 | network-electronics.com106
10 mOduLE SLOtS• Mixandmatchmodulesaccordingtoyourneeds
• Allcablingattherear
• Afullyfunctioning16-channelCWDMsysteminonly2RUwith
dual converters
EaSy CONFIguRatION• Shorttimetogetonair
NO FaNS• Lowpowerconsumptionmeansthatwehaveremovedthemost
commonsinglepointoffailure;thefans
tWO POWER SuPPLy SLOtS• Singleorredundant,loadsharingpowersupply,AC,DCoramix
HOt-SWaPPaBLE aRCHItECtuRE• Hot-swappingofmodulesandpowersuppliesaccessiblefromfront
means short replacement time
• Nore-cablingneededformodulereplacement/
re-configuration
• Noelectricaldisturbanceonothermodulesduringhot-swapping,
particularly important in on air situations
COmPREHENSIvE CONtROL aNd mONItORINg • StatusmonitoringthroughfrontLEDs,GPIand
rS-422 simultaneously
• Addresssettingofeachframeallowsforsimultaneouscontrolof8
frames
• SNMP–SimpleNetworkManagementProtocolsupportforuse
with larger Network Management Systems is standard on all
modules
• GYDA-SCSystemControllerprovideswebinterface/SNMPforall
modules connected to the controller at a remote location
• Remoteconfigurationandmonitoringsavestimeandtrouble-
shooting time
Flashlink 2ru Frame– Compact and comprehensive
Flashlink Frame
ac power ac power supply module 100–260 Vac (PWr-ac15/15/5/5V)
Dc power (optional) Dc power supply module 36–72 VDc (PWr-Dc15/15/5/5V)
redundant power (optional)
Dimensions 483 x 88 x 178 mm (19”, 2ru)
card slots 10
Power supply slots (reserved) 2
internal voltages +5V, +15V, –15VWeight approx. 3 kg fully populated dependent on
module types
FR-2Ru-10-2
Flashlink Frame
FR-2Ru-10-2
Power Supply for Flashlink Frame
internal power supplies are available in both ac- and Dc-versions. Mixed ac/Dc operation is possible, when both power supply slots are used for redundancy. an leD in the front shows if the power is active. The internal powers can deliver 30W at ±5V, 15W at +15V and 15W at –15V at the same time.
PWR-aC15/15/5/5vinput voltage 100-260Vac
Output voltages ±5V, ±15V Dc
PWR-dC15/15/5/5vinput voltage 36-72VDcOutput voltages ±5V, ±15V Dc
Flashlink Housing
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
network-electronics.com | 107
N-bOX 2.1
FlaSHliNK HOuSiNgS
N-bOX is an ultra compact, ruggedized and cost effective
housing for the Flashlink modules.
The same Flashlink modules and backplanes can
be used in the Flashlink Fr-2ru-10-2 frame and
in N-bOX. This interchange ability allows for easy
migration and system expansion from N-bOX to
the Flashlink
Fr-2ru-10-2 frame in case of future expansion
needs.
all Flashlink modules have the same feature set regardless of housing.
1ru shelf for up to 4 x N-bOX, including 3 front panels for empty
slots
1Ru Shelf
N-BOX-SH1Ru
Mounting plate for N-bOX, allows wall, on-table, under-table
mounting, complete with screw set
mounting Plate
N-BOX-PL1
angled mounting plate for N-bOX, allows wall, on-table, under-table
mounting, complete set with 2 plates and screws
angled mounting Plate
N-BOX-PL2
interconnecting plate for N-bOX, allows stapling of N-bOXes,
complete set with 2 plates and screws
Interconnecting Plate
N-BOX-PL3
Distribution amplifiersembedders / De-embeddersVideo convertersaudio convertersSynchronisation Modulesautomatic changeover ModuleseO and Oe convertersDatacom interfacesHD Downconverters
108 | network-electronics.com
mOt-BOX is the most compact and lightweight mobile transport
enclosure available.
MOT-bOX houses one Flashlink 2ru frame with modules for optical
transport, signal processing and distribution.
RuggEdIzEd dESIgNWith its ruggedized design it is the logical choice for all mission-
critical mobile and outside broadcast applications.
IdEaL FOR OutSIdE BROadCaSt EvENtSNetwork electronics is known as the supplier of routing and signal
transport solutions to all major sports events in the world. events like
the Olympic games, FiFa World cup, and Skiing World cups have
been broadcasted to millions of viewers with Network electronics
equipment. The MOT-bOX is the ideal solution for coverage of these
applications and any other outside broadcast event.
mINImISEd SPaRES HOLdINgThe MOT-bOX can be pre-configured to meet specific requirements,
and also shared among several vans for e.g. news gathering,
substantially lowering the investment cost.
Since the modules of the mobile system are exactly the same as you
use in the studio, the number of spares can be held at a minimum.
LIgHtWEIgHtThe MOT-bOX design with rugged connectors like Xlrs for audio and
a hermaphroditic (both male and female) fiber connector holding
4 fibers allows for use in harsh environment. The low weight gives
maximum mobility, two person lift is a thing from the past. One
person can easily carry the MOT-bOX alone. in a fully loaded van
close to exceeding weight limits, the low weight of the MOT-bOX will
be appreciated.
ROBuSt FIBER CaBLEThe Mil specified tactile fiber with hermaphroditic connectors has 4
fibers and can be delivered in lengths of 150m, 250m or 500m. The
extremely robust fiber cable ensures a reliable fiber connection.
muLtIPLE FIBERS, muLtIPLE SIgNaLSThe 4 fibers allow uni- or bi-directional video with associated audio
and rS-422 signals. by utilising TDM (electrical multiplexing) and
cWDM (optical multiplexing) the number of signals can be increased
to meet specific demands.
HD-SDi, SD-SDi or analog video, the choice is yours, MOT-bOX is the
ideal companion for mobile and outside broadcast productions.
mOt-BOX• Themostcompactandlightweight3RUmobiletransporthousing
available
• HoldsaFlashlink2RUframe
• ACandDCpowersupplyoption
• SupportsthefullsetofFlashlinkmodules
• Ruggedizedconnectorbackplanesfortoughuse
• MILspecifiedtactilefibercablereelswith4fibers(optional)
• BreakoutpanelstovariousconnectorslikeSC/PCorE2000
available
• Only12kgfullypopulatedwithredundantpowersupply
MOT-bOX
FlaSHliNK HOuSiNgS
2.1
Flashlink MOT-bOX– Extremely lightweight mobile transport enclosure
network-electronics.com | 109
Fiber hermaphroditicexpanded beam connector
The optical fiber is fully protected behind a hard-coated
expanded beam lens and forms a no-contact connection.
Dirt and contamination can be simply cleaned
with a cloth (or your shirt sleeve)
MOT-bOX 2.1
FlaSHliNK HOuSiNgS
mOt-BOX
ac Power PWr-ac15/15/5/5V
ac power supply module 100-260 Vac
Dc Power (optional) PWr-Dc15/15/5/5V
Dc power supply module 36-72 VDc
Dimensions (WxDxH) 530 x 570 x 215 mm with front and rear covers. 530 x 425 x 215 mm w/o front and rear covers
Weight including PSu and 10 modules: <12 kg
card slots 10
Power Supply slots 2internal voltages +5V, -5V, +15V, -15V
mOt-BOX
mOt-BOX Backplane modulesMb-Fr-1ru
1ru frame with front mounted 4-Fiber expanded beam hermaphroditic Mil connector, rear panel with 4 x Sc-Pc connector. Space for up to 5 Mil fiber connectors.
Mb-Mil-4Sc Mil connector to 4xSc breakout for use
with Mb-Fr-1ru
Mb-bP-00 blindplate
Mb-bP-01 backplane for aDc-aeS
Mb-bP-02 backplane for Dac-aeS, Da-aa or Da-aeS
Mb-bP-03 backplane for SDi-Oe, SDi-eO, HD-Oe or
HD-eO
Mb-bP-04 backplane for Da-SDi ,Da-SDi-Nrc,
Da-HDSDi, aDc-SDi, aDc-SDi-cc,
Dac-SDi, SDi-TD
Mb-bP-05 backplane for aV-MuX
Mb-bP-06 backplane for aaV-MuX or aVa-MuX
Mb-bP-07 backplane for aV-DMuX, aaV-DMuX,
aVa-DMuX or aV-HD/SD-XMuX
Mb-bP-08 backplane for D422-Mg (rS-422)
Mb-bP-09 backplane for D422-MD (gPi in and out)
Mb-bP-10 backplane with 4x Sc-Pc fiber connector
including 4x0.5m fiber patch cord
Mb-bP-11 backplane with 4x e2000/Pc fiber
connector including 4x0.5m fiber patch
cord
mOt-BOX Reels with cables
Singlemode tactical 4-Fiber cable terminated with expanded beam hermaphroditic Mil fiber connector
Mb-reel-150 reel with 150m
Mb-reel-250 reel with 250m
Mb-reel-500 reel with 500m
mOt-BOXAC power
DC power
Fiber connector
Ethernet
110 | network-electronics.com
gYDa-Sc
• Controlsupto8Flashlinkframes
• 10/100Base-TEthernetinterfacewithTCP/IPprotocol
• StandardwebbrowserstoconfigureandmonitorFlashlink.
• Log-filesarestoredoncompactflashcard
• User-friendlygraphicaluserinterface
• SupportforVikinXCompactandVikinXSublimeroutercontrol
• SNMPsystemwithalarmandtrapfilteringimplementedforall
modules
• FTPserviceforonlineupgrades
• Noannuallicencefee
• VisualizesystemconditioninVisiodrawings(option)
and many more ...
Web and SNMP based control, Monitoring and configuration – Element manager for Flashlink
System controller for Flashlink
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
SyStEmcPu 400MHz intel PXa255
StrongarM
Memory 64Mb SDraM 8Mb Flash
ELECtRICaL INtERFaCES
2 x rS-232 or rS-422 control ports on Db9F conforming to ibM Pc (rS-232) or SMTPe 207M (rS-422)
1 x 10baseT/100base-TX fast ethernet, full duplex capable
POWER CONSumPtION
+5V Dc / 3W
example of web interface in gYDa-Sc
network-electronics.com | 111
REmOtE mONItORINg aNd CONtROLuse internet technology to connect remote sites together, enabling
complete control of all your Flashlink equipment from all locations.
Sending technicians to remote locations for error tracing becomes
a thing of the past. error correction is faster, saving money and
providing better availability to the end user.
ONLINE mONItORINggYDa-Sc will continuously monitor the system for all vital
parameters, like signal quality and power supply voltages. The web
page is automatically updated with the latest information.
CONFIguRatIONall cards can be configured through gYDa-Sc. Some cards have
advanced configuration possibilities which are straight-forward with
gYDa-Sc.
The configuration is stored in gYDa-Sc securing on-the-fly card
replacements with minimum down time.
aLaRmSgYDa-Sc has advanced alarm handling,
where an operator can get a “system health
condition” report. The alarms will not be
removed from the alarm list until they are
acknowledged by an operator. an alarm
can be acknowledged while it still is active,
it will then be removed automatically from
the alarm list, the moment the cause of the
alarm is resolved.
Example of alarms:
• Cardremoved
• Lossofsignal
• Laserfailure
• Supplyvoltageoutofrange
• GPIinput
SyStEm vISuaLIzatIONas an optional feature you can use your
Visio system drawings to visualize the
connection and the system status in gYDa-
Sc.
gyda-SC aNd SNmP aPPLICatIONSall Flashlink modules will generate SNMP
traps according to user settings in the
interface configuration section on the
gYDa-Sc. gYDa-Sc is also able to interface
and control cross point settings of the
VikinX compact routers, providing cross
point information via SNMP or the web
interface.
This feature gives you the possibility to
have:
• Audiblealarms
• Alarmnotificationone-mail
• Browserpop-uponmodulepageswith
alarms
• Traprelay
LOggINgThe logging facility gives the user a system
history with date and time of each event.
The log will be stored on the flash card, and
can not be cleared without a reset, making
it ideal for error tracing «a posteriori».
The log file can easily be exported to your
computer for future reference
availability and Password protection
in the default setup, gYDa-Sc is available
to all users on the network. gYDa-Sc
allows anonymous/open access to the card
information. Two extra levels of protection
(observer and operator) can be enabled for
situations where anonymous access to the
system, alarm and log tabs is not wanted.
Manuals and technical documentation
are always available since gYDa–Sc has a
complete collection of all Flashlink manuals
in adobe PDF format.
System controller for Flashlink 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
CWDMCWDM
2
4
SDI/ASI2
SDI/ASIETH
SDI/ASI
Site 2
CWDMCWDM
2
4
SDI/ASI2
SDI/ASIETH
SDI/ASI
Site 3GYDA-SC GYDA-SC
fibre
CWDMCWDM
2
4
SDI/ASI2
SDI/ASIETH
SDI/ASI
Site 5GYDA-SC
CWDMCWDM
2
4
SDI/ASI2
SDI/ASIETH
SDI/ASI
Site 4GYDA-SC
fibre
CWDM
Site 1fibre
CWDM
fibre
fibre
4SDI/ASI
SDI/ASI
ETH
4
4SDI/ASI
SDI/ASI
ETH
4 Flashlink gives you the possibility to use ethernet over fiber.With this solution you can monitor and control the whole system with GYDA-SC
GYDA-SC
example of alarm list in gYDa-Sc
112 | network-electronics.com
Modular Distribution amplifiers
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
multi Rate 3gHd-SdI distribution amplifier
ELECtRICaL OutPutSconnectors 75 ohm bNc
Output return loss - < -15db, 5MHz -1.5gHz - < -10db, 1.5gHz - 3gHz
Output signal level 800mV +/- 10%
Output signal rise / fall time 20% – 80% -SDlimit:[0.4ns–1.5ns];<0.5nsrise/fall var. - HD limit: < 270ps, <100ps rise/fall var. - 3g HD limit: <135ps, <50ps rise/fall var.
amplitude overshoot <10%
Polarity - Output 1,3 5 & 7: Non inverting electrical - Output 2, 4, 6 & 8: inverting electrical
Output timing jitter - SD: <0.2 ui - HD: <1 ui - 3g HD: <1ui
Output alignment jitter - SD: <0.15 ui - HD: <0.15 ui - 3g HD: <0.2ui
ELECtRICaL INPutSconnectors 75 ohm bNc
input cable eq. @270Mbps >300m w/belden 8281, with ber < 10e-12
input cable eq. @1485Mbps >100m w/belden 1694a, with ber < 10e-12
input cable eq. @2970Mbps >70m w/belden 1694a, with ber < 10e-12
input return loss - < -15db, 5MHz -1.5gHz - < -10db, 1.5gHz - 3gHz
Jitter tolerance - SD limit: - 10Hz-1kHz: >1 ui - 10kHz – 5MHz: >0.2 ui - HD limit: - 10Hz-100kHz: >1 ui - 100kHz–10MHz: >0.2 ui - 3g HD limit: - 10Hz-100kHz: >2 ui - 100kHz–10MHz: >0.3 ui
FEatuRESre-clocking automatic SD/ HD detection
automatic output slew rate adjustment according to SMPTe-259M and SMPTe-292M/ SMPTe424M
Selectable loop bandwidth - low: 3gHD = 3.5Mhz, HD = 1.5MHz, SD = 0.32MHz - High: 3gHD = 7MHz, HD = 3.5MHz, SD = 0.64MHz
Supported clock rates 270, 1483.5, 1485, 2967, 2970Mbps
input equalizer eq. bypass for non-video formats or low bit rates
SuPPORtEd StaNdaRdSSMPTe SMPTe424M, SMPTe292M, SMPTe259M,
SMPTe305M, SMPTe310M
DVb-aSi eN50083-9 (on non-inverting outputs)
da-3gHd
Equaliser
Bypass
MicrocontrollerRemoteControl
HD1
HD2
HD3
HD4
HD5
HD6
HD7
HD8
HDinput
network-electronics.com | 113
Modular Distribution amplifiers 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
analog video multisignal distribution amplifier
•DCto200MHzanalogvideo• 6non-invertingoutputs• AlsosuitableforSDIaccording
to SMPTe-259M
ELECtRICaL INPutMaximum input 2 Vp-p
coupling Dc
impedance 75 ohm (switchable to high impedance)
connector bNc
ELECtRICaL OutPut
Number of outputs 6
connector bNc
impedance 75 ohm
Signal polarity 6 non inverting
aNaLOg vIdEO
Frequency range 0 to 200 MHz -3db
return loss > 40db @ 10MHz
Video S/N ratio > 70db
Differential gain < 0.1 %
Differential phase < 0.1 º
gain 0db ± 0.1db 0-15 MHz 0db ± 0.5db 0-150 MHz
aNaLOg amPLIFIER uSEd FOR SdI-vIdEO (SmPtE 259m)
gain 0db
Jitter < 700 ps, typ. 250 ps
return loss > 15db @ 270MHz
Data rate up to 270Mbps
rise/fall overshoot < 10 %, typ. 0 %
rise and fall time > 400 ps, < 1500 ps, typ. 1000 ps
rise/fall time difference < 500 ps, typ. 100 ps
gENERaL
Power +5V Dc / 0.1 W, ±15V Dc / 1.9W
control control system for access to setup and module status with biTe (built-in Test equipment) for use with gYDa-Sc control System
da-va
MicrocontrollerRemoteControl
Video1
Videoinput
Video2
Video3
Video4
Video5
Video6
SdI distribution amplifier
• SDI/ASIdistributionamplifier• 6non-invertingoutputs,2invertingoutputs• Re-clockingrates143,177,270,360,540Mbps•Configurablereclockerbypassfornon-videobitrates•ConfigurableEQdefeatforlowbitrates
ELECtRICaL SIgNaL INPutSNumber of inputs 1
Standard SMPTe 259M
Data rate 19.4Mbps – 540Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5MHz-270MHz)
cable equalization 0 to 300m typical belden 8281a
ELECtRICaL SIgNaL OutPutSNumber of outputs 8
connector 75 ohm bNc female
Signal level 800mVp-p ±100mV
Signal Polarity all outputs non-inverting
impedance 75 ohm nominal
return loss > 15db (5MHz-270MHz)
FEatuRESre-clocking rates 143, 177, 270, 360, 540Mbps
Supported standards SMPTe 259M, 305.2M, 344M, 310M, DVb-aSi eN50083-9 (on non-inverting outputs), aeS-3id
configuration configurable autom. mute or bypass when not locked
input equaliser bypass for non-video formats configurable eQ mute
gENERaL
Power +5V Dc / 3W
control control system for access to setup and module status with biTe (built-in Test equipment) for use with gYDa-Sc control System
da-SdI
Equaliser
Bypass
MicrocontrollerRemoteControl
SDI1
SDI2
SDI3
SDI4
SDI5
SDI6
SDI7
SDI8
SDIinput
114 | network-electronics.com
Modular Distribution amplifiers
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
dual digital audio distribution amplifier
•Digitalaudiodistributionamplifier•ConfigurableasDual1x4orSingle1x8• Reportssignalpresence• Supportssampleratefrom15to96kHz• Supportsbitratefrom16kbpsto14Mbps
ELECtRICaL INPutNumber of inputs 1 or 2
Standard aeS-3
Supported Sample rate 15-96kHz
Signal amplitude 0.2-7Vp-p
connector Db15 balanced
impedance 110 ohm nominal
ELECtRICaL OutPut
Number of outputs 8 or 4+4
connector Db25 balanced
Signal amplitude 4Vp-p ±1Vp-p
impedance 110 ohm nominal
FEatuRES
configurable dual 1 input to 4 outputs or single 1 input to 8 outputs
gENERaL
Power +5V Dc / 0.5W
control control system for access to setup and module status with biTe (built-in Test equipment) for use with gYDa-Sc control System
da-aES
MicrocontrollerRemoteControl
AES 1Output
AES 1Input
AES 1Output
AES 1Output
AES 1Output
AES 2Output
AES 2Input
AES 2Output
AES 2Output
AES 2Output
dual analog audio distribution amplifier
• Analogaudiodistributionamplifier• Precisiongainsettingsfor-12to+12dB• Allowsmixingof2inputsindual1x4mode• ForbalancedACsignalsfrom3.3Hzto400kHz
ELECtRICaL INPutNumber of inputs 2
connector Db15 balanced
impedance > 10k ohm
Maximum input level +25dbu
common mode rejection >70db
ELECtRICaL OutPut
Number of outputs 8
connector Db25 balanced (Tascam Da88)
Frequency response 20 Hz–80kHz ±0.2db
crosstalk -100db
THD+N > 100db ref to 20 Hz-20kHz @ 20dbu
impedance 40 ohm nominal. Maximum 55 ohm
Maximum Output level +25dbu
Output voltage balance ratio >30db
Output common mode rejection >50db
Switched gain tolerance 0.1db
gain -12 to +12db
gENERaL
Power +5V / 0.1 W, ±15V / 1.9W
control control system for access to setup and module status with biTe (built-in Test equipment) for use with gYDa-Sc control System
da-aa
MicrocontrollerRemoteControl
ANA 1OutputANA 1
Input
Gain Settings
ANA 1Output
ANA 1Output
ANA 1Output
ANA 2Output
ANA 2Output
ANA 2Output
ANA 2Output
ANA 2Input
Gain Settings
network-electronics.com | 115
Modular Distribution amplifiers 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
SdI distribution amplifierw/monitoring Output
• 8-bitcompositeencoderandDA• 3SDIand3compositeoutputs• Automaticstandardsdetection• EDHmonitoring• AlsoavailableasPAL-M version
dIgItaL SERIaL INPutSignal 4:2:2 SMPTe 259M-c, 270Mbps
equalization automatic
impedance 75 ohm
return loss >15db @ 270MHz
Signal level nom. 800mV
connector bNc
dIgItaL SERIaL OutPut
Signal 4:2:2 SMPTe 259M-c, 270Mbps reclocked
connector bNc
Number of outputs 3
impedance 75 ohm
return loss >15db @ 270MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
aNaLOg OutPut
connector bNc
impedance 75 ohm
Formats composite video, Pal 625/50 or NTSc 525/60
Signal level 1Vp-p
return loss >40db up to 10MHz
PROCESSINg PERFORmaNCE
Signal path 8/10 bits
Sampling 27MHz
Video bandwidth 5.5MHz
SNr >60db typical
gENERaL
Power +5V Dc / 2W, -15V Dc / 0.6W
control control system for access to setup and module status with biTe (built-in Test equipment) for use with gYDa-Sc control System
daC-mON
EDH
CVBS 1
CVBS 2
CVBS 3
SDI IN
SDI 1
SDI 2
SDI 3
116 | network-electronics.com
embedders/De-embedders
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
FLaSHLINk BaCkPLaNES FOR 110 OHm aES3 OR 75 OHm aES-3Id
all Flashlink modules for audio are for 110ohm balanced aeS3 audio, but can also be ordered with a backplane for 75ohm unbalanced audio.
The tables below show the products and compatible backplanes.
BaCkPLaNE
aV-MuX-c1
(110ohm)
aV-MuX-c2
(75ohm)
aaV-DMuX-c1
(110ohm)
aV-HD-XMuX-c1
(110ohm)
aV-HD-XMuX-c2
(75ohm)
PROduCt
aV-MuX(-xxT) v x
aV-DMuX (-r) v x
aaV-MuX (-xxT) v
aaV-DMuX (-r) v
aV-HD/SD-XMuX x v x
aV-HD/SD-XMuX (-xxT) x v x
aV-HD/SD-XMuX (-r) x v x
aV-HD/SD-XMuX (-r-xxT) x v
v = Factory default backplanex = alternative backplane
audIO EmBEddINg
BaCkPLaNE
aDc-aeS-c1
(100ohm)
aDc-aeS-c2
(75ohm)
Dac-aeS-c1
(110ohm)
Dac-aeS-c2
(75ohm)
PROduCt
aDc-aeS v x
Dac-aeS v x
v = Factory default backplanex = alternative backplane
audIO CONvERSION
alternative backplane Short description (see respective user manual for detailed information)
aV-MuX-c2 2 slots, 4x 75ohm bNc i/p and 4x o/p, for aeS-3id
aV-HD-XMuX-c2 1 slot, 2x 75ohm bNc i/p and 2x o/p, for aeS-3id
aDc-aeS-c2 1 slot, 2x75ohm bNc o/p for aeS-3id
Dac-aeS-c2 1 slot, 2x75ohm bNc i/p for aeS-3id
network-electronics.com | 117
embedders/De-embedders 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
digital audio Embedder
• 4-channel24-bitAES(8monoaudio)audio embedder
• Automaticinsertionofsamplerateconverters• EDHinaccordancewithSMPTE-RP165• Embeddinginacc.withSMPTE-272Mgiving
maximum compatibility to 3rd party products• TransformerbalancedAESin-andoutputs• Allowsexternalsamplingratesfrom16-144kHz
w/Src enabled•Canbeusedas4-CHembedder,4-CHde-embedderor
2-cH de-embedder/embedder • 110ohmbalancedand75ohmunbal.versionavail.•Optionalwithopticaloutput(AV-MUX-xxT)
gENERaLPower +5V Dc / 5.3W
control DiP Switches/gYDa-Sc
Monitoring Front panel leDs and gYDa-Sc
gPi SDi input loss, 4 x aeS input loss, laser failure, power good
aES audIO INPut/ OutPutSNumber of inputs 4 transf. balanced
Number of outputs 4 transf. balanced
Format aeS3-1992
impedance 110ohm or 75ohm
connector Db25-110ohm and bNc-75ohm
Sampling rates asynchronous to SDi 16-144kHz w/Src enabled. isosynchronous to SDi 48kHz
SdI INPut / OutPutData rate NrZ 270Mbps
Video Frame rates 50 Hz and 60 Hz
input equalization auto. up to 35db
impedance 75ohm
return loss >15db @270MHz
Signal level nom. 800mV
connector bNc
Output rise/fall time typ. 650ps
OPtICaL OutPut (OPtIONaL) Transmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Optical wavelength for cWDM See page 153
Optical power for cWDM modules 0dbm
Jitter (ui=unit interval) 0.135 ui max.
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc according to SMPTe-297M
av-muX, av-muX-XXt
AES1Input
Microcontroller RemoteControl
SRCI0
AES2Input
SRCI0
AES3Input
SRCI0
AES4Input
AES1Output
AES2Output
AES3Output
AES4Output
OpticalOutput
SDIInput
SDIOutput
SRCI0
EQ Re-clocker EDH EDH4-chMultiplexer
4-chMultiplexer
digital audio de-embedder
• 4-channel24-bitAES(8monoaudio)audio de-embedder• EDHinaccordancewithSMPTE-RP165•De-embeddinginacc.withSMPTE-272Mgiving maximum compatibility to 3rd party products • TransformerbalancedAESoutputs• 110ohmbalancedand75ohmunbalanced version available•Optionalwithopticalinput(AV-DMUX-R)
gENERaLPower +5V Dc / 3.7W
control DiP Switches/gYDa-Sc
Monitoring Front panel leDs and gYDa-Sc
gPi SDi input loss, 2 x audio group, optical input loss, power good
OPtICaL INPut (OPtIONaL)Data rate optical 270Mbps
Sensitivity better than –20dbm typ.
Optical wavelength 1200-1620nm
Transmission circuit fiber Multi mode 50/125um. Single mode 9/125um compatible
connector return loss >40db w/SM fiber
Detector overload threshold min. –6dbm, typ. –3dbm
connector Sc/uPc
aES audIO OutPutNumber of outputs 8 transf. balanced
Format aeS3-1992
impedance 110ohm or 75ohm
connector Db25-110ohm and bNc-75ohm
Sampling rates 48kHz
SdI INPut / OutPutData rate NrZ 143-540Mbps
input equalization auto. up to 35db
impedance 75 ohm
return loss >15db @270MHz
Signal level nom. 800mV
connector bNc
Number of outputs 1
Output rise/fall time typ. 650ps
av-dmuX, av-dmuX-R
Microcontroller RemoteControl
AES1Output
AES2Output
AES3Output
AES4Output
OpticalInput
SDIInput
SDIOutput
EQ EDH 4-chDe-multiplexer
4-chDe-multiplexer
Re-clocker
Also available with 75ohm AES-3id backplane
Also available with 75ohm AES-3id backplane
118 | network-electronics.com
Hd digital audio Embedder and de-embedder
av-Hd-XmuX / av-Hd-XmuX-R / av-Hd-XmuX-t
embedders/De-embedders
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
EmBEddER FEatuRES• All-in-oneEmbedderandDe-embedder•Multi-formatSD/HDsupport• Embedsandde-embeds4AESsignals• AESinputswithsamplerateconversionallowingsamplingrates
from 32 to 192kHz• SamplerateconversionbypassforDolbyEaudio• TransformercoupledAESin-andoutputs• Accepts20or24bitaudio• RS-422inputforembeddingofserialdataorGPIinformation•UninterruptedtransportofAESaudioincaseoflossofSDIsignal• AutomaticmuteofAESincaseofAESerrors
OPtICaL PORt FEatuRES•Optionalopticalinputandoutputprovidingupto30dBopticalbudget(SD)• SupportspathologicalSDI/HDSDIpattern(checkfield)• 1310nm,1550nmandCWDMlasersavailable
audIO PROCESSOR/dELay FEatuRES• Audiomatrixandprocessorallowinggroupswap,channelshuffle,L/R
inversion and channel summing • 4-channelAESvariableaudiodelaylinewithupto1.2sdelay
OtHER gENERaL FEatuRES• Internalvideogenerator• AudioTestTonegenerator• Built-inEDHprocessor• Backplanesforbalanced110ohmandunbalanced75ohmAESavailable•GYDA-SCenabledforremotecontrol,statusmonitoring,errorreportingand
SNMP support
COmPLIaNt tO tHE FOLLOWINg BROadCaSt StaNdaRdSFormats StandardsSD, 270Mbps SMPTe 259M, SMPTe 272M-ac (synchronous
audio at 48kHz and extended data packets)HD, 1485 Mbps SMPTe 292M, SMPTe 274M, SMPTe 291M,
SMPTe 295M SMPTe 296M, SMPTe 299MaeS aeS3-1996Optical SMPTe 297M, SMPTe 292MeDH compliant to SMPTe-rP165
Microcontroller RemoteControl
RS422RS422
EDH/De-Ser.
EDH/Ser.
De-embed.
Em-bedder
Optical Receiver Optical TransmitterSD / HD
optical fiber
SD / HD
optical fiber
SDI/HDInput
EQ SDI/HDOutput
EQ
Re-clocker
TxRx
AES1
AES2
AES3
AES4
AES1
AES2
AES3
AES4
AudioProcessing
• Audio Matrix• Audio Delay• Group swapping• Video Generator• Audio Generator
SRC
SRC
SRC
SRC
network-electronics.com | 119
embedders/De-embedders 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
mEaSuREmENt CONdItIONSaudio Sampling rate 48 kHz
ambient temperature 25 ºc
gENERaLPower +5V Dc / 3.3W
control DiP switches, gYDa-Sc system controller. gPi
Monitoring Front panel leDs gYDa-Sc system controller and gPi.
eDH processing Full. received flags are updated, new crcs are calculated
ELECtRICaL vIdEO INPutVideo Data rate 270Mbps or 1.485gbps
Video frame rate 24p, 50i, 60i, 50p or 60p Hz.
equalization automatic up to 35db
impedance 75 ohm
return loss >15db @1,5gHz
Signal level nom. 800mV
connector bNc
OPtICaL vIdEO INPutTransmission circuit fiber Multi-mode 50/125 um
Optical wavelength 1200–1620nm
Maximum Optical power 0 dbm
Minimum Optical power HD/SD –25/–30 dbm
return loss better than 27 db typ.
Maximum reflected power 4%
connector Sc/uPc
audIO INPutSNumber of aeS inputs 4
audio data rate 32 kHz to 192 kHz, converted to 48 kHz if not isochronous to the video input signal
impedance (c1) 110 ohm transformer balanced
connector (c1) 25 pin D-sub. (4 inputs + 4 outputs)
impedance (c2) 75 ohm unbalanced
connector (c2) 4 x bNc
embedded audio word length: 24 bits
embedded audio channel status: as received when synchronous. Otherwise fixed
Sample rate converter dynamic range: 140 db(a)
data INPutSrS-422 1
connector rJ45
uarT baud rates 115200, 34800
Data length 5 to 8 bits
Parity None, odd or even
Stop bits 1, 1.5 or 2 bits
gPi mode raw data sampling frequency 93750bps (supports baud rates up to 19200)
ELECtRICaL vIdEO OutPutNumber of HD/SDi outputs 1
connector bNc
impedance 75 ohm
return loss > 15db @1.5gHz
Signal level nom. 800mV.
rise/fall time (SD) typically 650ps. @270Mbps
rise/fall time (HD) typically 100ps. @1485Mbps
OPtICaL vIdEO OutPutTransmission circuit fiber Single mode
light source F-P/DFb laser
Optical wavelength ver. 13T 1310nm ± 40nm Optical power: -7.5 or 0 dbm
Optical wavelength ver. cxxxxT (16 cWDM wavelength acc. to iTu-T g.694.2)
Optical power: 0 dbm
Jitter (ui=unit interval) 0.135 ui max.
connector Sc/uPc HD/SDi digital serial component video
audIO OutPutSNumber of aeS outputs 4
audio data rate 48 kHz
impedance (c1) 110 transformer balanced
connector (c1) 25 pin D-sub
impedance (c2) 75 ohm unbalanced
connector (c2) 4 x bNc
data OutPutSNumber of rS-422 Outputs 1
connector rJ45
gPI OutPutSSignals Power status good, video optical input
loss, video electrical input loss
connector rJ45
Signal type Open drain transistor with free-wheel diode
Positive signal Valid video output
Maximum voltage 100 V
Maximum current 150 ma
av-Hd-XmuX-C1:Transponder
av-Hd-XmuX-C2: AES-3ID (75 ohm)
aav-dmuX-C1: AES-3 (110 ohm)
av-Hd-muX-C2: AES-3ID (75 ohm)
av-Hd-XmuX-C3:1 optical input, 2 SDI outputs and 4 BNC AES-3ID outputs
120 | network-electronics.com
embedders/De-embedders
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
analog audio de-embedder
• 4channelanalogaudiode-embedder• 24bitconverters106dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentsonDIPswitches• EDHinsertionandhandling•Optionalwithopticalinput(AAV-DMUX-R)
gENERaLPower +5V/2.4W / ±15V/2.2Wcontrol DiP switchesMonitoring Front panel leDs and gYDa-Sc and gPieDH Processing Full. received flags are updated, new crcs
are calculatedDe-embedding level SMPTe 272M-c Synchronous audio at
48kHz and extended data packets (24-bit optional)
aNaLOg audIO OutPutSNumber of outputs 4 electronically balancedconnector D-sub 25 pin femalecommon mode voltage tolerance ±15 VOutput impedance (differential) 50ohmFrequency response 10 Hz–21.5kHz, +0db -0.1dbPassband ripple ±0.0002dbgroup delay 44 samples/0.9msStopband attenuation 75dbDynamic range* Min. 100db(a) (0dbFS @ +12dbu). Typ.
105db(a)THD+N @ -1dbFS Max. –80db, Typ. –87dbintermodulation dist. @–12db FS** Max. –80db, Typ. –87dbcrosstalk Max. –85db, Typ. –95db
SdI OutPut No. of SDi outputs 1connector bNcimpedance 75ohmreturn loss > 15db @270MHzSignal level nom. 800mV.rise/fall time typically 650ps.
OPtICaL INPut (OPtIONaL)Transmission circuit fiber Multi mode 50/125um
Single mode 9/125um compatibleOptical wavelength 1200-1620nmMax. Optical power 0dbmSensitivity -20dbm, typ. -25dbmreturn loss better than 40db typ.Max. reflected power 4%connector Sc/uPc
vIdEO INPutVideo Data rate 270MbpsVideo frame rate 50Hz or 60Hzequalization automatic up to 35dbimpedance 75ohmreturn loss >15db @270MHzSignal level nom. 800mVconnector bNc
* |(THD+N of –60db FS signal)| + 60 ** SMPTe 4:1 60 Hz + 7kHz
aav-dmuX, aav-dmuX-R
OpticalInput
SDI
Audio 2RAudio 2L
Audio 1RAudio 1LReclocker
deserialiserDe-embedder
analog audio Embedder
• 4channelanalogaudioembedder• 24bitconverters107dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentswithDIPswitches• EDHinsertionandhandling• 20or24bitembedding•Optionalwithopticaloutput(AAV-MUX-xxT)
gENERaL Power +5V/2.6W / +15V/1Wcontrol DiP switchesMonitoring Front panel leDs and gYDa-Sc and gPieDH Processing Full. received flags are updated, new crcs
are calculatedembedding level SMPTe 272M-c Synchronous audio at
48kHz and extended data packets (24-bit optional)
vIdEO INPut Video data rate 270MbpsVideo frame rate 50Hz or 60Hzequalization automatic up to 35dbimpedance 75 ohmreturn loss >15db @ 270 MHzSignal level Nom. 800 mVconnector bNc
audIO INPutS No. of ana. inputs 4audio data rate 48kHzimpedance 24 kohm electronically balancedconnector 25-pin D-subembedded audio word length: configurable 20 or 24 bits.Dynamic range* >100db(a)crosstalk < -90dbFrequency response 20-Hz-20kHz +0db –0.1dbcommon Mode rejection ratio (cMrr): Min 70db, typ 80dbgroup delay 12 samles, 250 usStopband attenuation 95db
SdI OutPut No. of SDi outputs 1connector bNcimpedance 75ohmreturn loss >15db @ 270 MHzSignal level Nom. 800 mVrise/fall time 650ps typ.
OPtICaL OutPut (OPtIONaL) Transmission circuit fiber Single mode 9/125umlight source F-P/DFb laserOptical wavelength (ver. 13T) 1310nm ± 40nmOptical power -7.5dbmOptical power (option) 0dbmOptical wavelength (ver. 15T) 1550nm ± 40nmOptical power (option) 0dbmOptical wavelength for cWDM See page 153Optical power for cWDM modules 0dbmJitter (ui = unit interval) 0.135 ui max.return loss >40dbMax. reflected power 4%connector Sc/uPc
* Dynamic range is calculated as |(THD+N of –60dbFS signal)|+60
aav-muX, aav-muX-xxt
Microcontroller RemoteControl
SDIInput
SDIOutput
OpticalOutput
EQ Re-clocker EDH EDH4-chMultiplexer
ANA1
ANA2
A/DBal. InputGain
Setting
ANA3
ANA4
network-electronics.com | 121
embedders/De-embedders 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
The global Video Transport leader
122 | network-electronics.com
embedders/De-embedders
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Hd/Sd analog/digital audio Embedder
aav-Hd-XmuX(-t/R)/ aav-Sd-XmuX(-t/R)
mEaSuREmENt CONdItIONSaudio Sampling rate 48 kHz
ambient temperature 25ºc
gENERaLPower +5V Dc 0.7a 3.5W
+-15V Dc 0.017a 0.5W
control DiP switches, gYDa system controller.
Monitoring Front panel leDs, gYDa system controller and gPi.
eDH/crc processing Full. received flags are updated, new crcs are calculated.
boot time 1.2 second
Digital audio inputs and outputs conform to aeS3-2003
Video inputs and outputs conform to SMPTe 292M-1998
Data input and output conform to eia rS-485
PROCESSINgVideo latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values.
SD LatencieSVideo des+4+350+256+2+ser video samples =
45.3us
audio embedding aeS+2+1+16 audio samples=20/48000 = 417us
audio de-embedding 4+16+1 audio samples =21/48000 = 438us
embedding data gPi mode 8+4+32 96kHz samples =44/96000 = 458us
embedding data uarT mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms
De-embedd. data gPi mode 8+32+8 96kHz samples =44/96000 = 458us
De-embedding uarT mode 8+32+8 96kHz samples =48/96000 = 458us
hD LatencieSVideo des+8+1024+1024+3+ser video samples =
27.6us
audio embedding aeS+2+1+8=12 /48000 = 250us
audio de-embedding 2+8+1=11/48000 = 229us
embedding data gPi mode 8+4+16 96kHz samples =28/96000 = 292us
embedding data uarT mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms
De-embedd. data gPi mode 4+16+8 96kHz samples =28/96000 = 292us
De-embedding uarT mode 4+16+8 96kHz samples =28/96000 = 292us
Microcontroller RemoteControl
RS422RS422
EDH/De-Ser.
EDH/Ser.
De-embed.
Em-bedder
Optical Receiver Optical TransmitterSD / HD
optical fiber
SD / HD
optical fiber
SDI/HDInput
EQ SDI/HDOutput
EQ
Re-clocker
TxRx
AES1
AES2
ANA1
ANA2
AES1
AES2
AudioProcessing
• Audio Matrix• Audio Delay• Group swapping• Video Generator• Audio Generator
A/D
A/D
SRC
SRC
• AAV-HD-XMUXcanhandleSDandHDdigitaluncompressedvideo• AAV-SD-XMUXcanhandleSDdigitaluncompressedvideo•De-embedandembedallgroupsofaudio•Copyormoveaudiogroupswithoutadditionaldelay•De-embed2AES3digitalaudioandnon-audiosignals• Embed2AES3digitalaudioandnon-audiosignals• Embed4analogueaudiosignals• ApplysamplerateconverterswhenneededontheAES3inputs• Applyextraaudiodelay• Swapstereochannels•Makemonoorsumfromstereosignals•Haveopticallaseroutput•Haveopticalinput• Transportasynchronousserialdata•Generatevideoandaudiosignals•De-glitchcorrectlysynchronisedswitchedvideo
network-electronics.com | 123
embedders/De-embedders 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
aav-Hd-XmuX(-t/R)/ aav-Sd-XmuX(-t/R)
ELECtRICaL vIdEO INPutaaV-hD-XmuX Video Data rate 270Mbps or 1,485gbps
Video frame rate 24p, 50i, 60i, 50p or 60p and pull down rates
aaV-SD-XmuX Video Data rate 270Mbps
Video frame rate 50i and pull down 60i rates
equalisation automatic up to 35db
impedance 75 ohm
return loss >15db up to 1,5gHz
Signal level nom. 800mV
connector bNc
OPtICaL vIdEO INPutOptical wavelength 1200-1620nm ±40 nm
Maximum Optical power 0 dbm HD PiN.
Min. Optical power HD/ SD -24/-28 dbm with HD PiN.
return loss better than 27 db.
Maximum reflected power 0,04
Transmission circuit fibre Single mode HD PiN/ (Multi-mode option on request). Multi-mode PiN is standard with aaV-SD-XMuX
connector Sc/uPc
aNaLOguE audIO INPutSNumber of inputs 4
Sampling frequency 48 kHz
Differential input impedance 24 kohmcommon mode input impedance 50 kohm
connector (c1 backplanes) Db-25F (Female with uNc threads)
Max. signal level (0 dbFS) +12, +13.5, +15, +16.7, +18, +20, +21 or +24dbu.
level precision +- 0.1db where Zsource < 40 ohm.common mode voltage tolerance +- 30V – (Maximum peak signal level)
Frequency response 20 Hz – 20 kHz 0.1 db
Pass-band ripple +- 0.005 db
Stop band attenuation 80 db
Dynamic range Min. 103 db (a), typical 107 db(a)
THD+N @ -1 dbFS Max. -90 db, typical -96 db.
intermodulation distortion Max. -90 db, typical -95 db.
crosstalk Max. -90 db, typical -99 db.
cMrr (20 Hz – 15 kHz) Max. 70 db @ 15 kHz, typical -90 db @ lf.
dIgItaL audIO INPutSNumber of aeS3 inputs 2
audio data rate 30 kHz to 200 kHz, converted to 48 kHz if not isochronous to the video input signal.
input impedance 110 ohms transformer balanced.
connector (c1 backplanes) Db-25F (Female with uNc threads)embedded audio word length 20 or 24 bitsembedded audio channel Status as received when isochronous, otherwise
fixed.
Sample rate converter dynamic range 139 db(a) @ 1kHz
data INPutSrS422 1
connector 8P8c Modular jack
uarT mode
baud rates 9600 to 115200
Data length 7 or 8 bits
Parity None, odd or even
Stop bits 1, 1.5 or 2 bits
gPi mode
raw data sampling freq. 93750 Hz
ELECtRICaL vIdEO OutPutNumber of HD/SDi outputs 1
connector bNc
impedance 75 ohm
return loss > 15 db to1.5gHz
Signal level nom. 800mV.
rise/fall time typically 650ps. @270Mbps. < 270ps @1.485gbps
OPtICaL vIdEO OutPutOptical wavelength (13T) 1310nm ±40nm
light source FP semiconductor laser
Optical power -7.5 dbm
extinction ratio >5:1
Optical wavelengths (13T0, 15T, cxxxxT) 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm ±6nm
light source DFb semiconductor laser
Optical power 0 dbm
extinction ratio >10:1
Jitter (ui=unit interval) <0.135 ui @ SD, <0.2 ui @ HD
return loss better than 40 db typ.
Maximum reflected power 0,04
Transmission circuit fibre 9/125um Single Mode
connector Sc/uPc
dIgItaL audIO OutPutSNumber of aeS3 outputs 2
audio data rate 48 kHz
impedance (c1 backplanes) 110 ohm transformer balanced.
connector (c1 backplanes) Db-25F (Female with uNc threads)
data OutPutSNumber of rS485 outputs 1
connector 8P8c Modular jack
gPI OutPutSSignals Power status good, no video input lock,
laser failure.
connector 8P8c Modular jack
Signal type Open drain transistor with free-wheel diode.
Maximum voltage 100 V
Maximum current 150 ma
124 | network-electronics.com
embedders/De-embedders
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Hd/Sd analog / digital audio de-embedder
aav-Hd-dmuX(-R)/ aav-Sd-dmuX(-R)
MicrocontrollerRemoteControl
RS422
AES1
AES2
AES3
AES4
RS422
EDH/De-Ser.
EDH/Ser.
De-embed.
Em-bedder
Optical Receiver Optical TransmitterSD / HD
optical fiber
SD / HD
optical fiber
SDI/HDInput
EQ SDI/HDOutput
EQ
Re-clocker
TxRx
ANA1
AudioProcessing
• Audio Matrix• Audio Delay• Group swapping• Video Generator• Audio Generator
A/D
A/D ANA2
• AAV-HD-DMUXcanhandleSDandHDdigitaluncompressedvideo• AAV-SD-DMUXcanhandleSDdigitaluncompressedvideo•De-embedandembedallgroupsofaudio•Copyormoveaudiogroupswithoutadditionaldelay•De-embed2AES3digitalaudioandnon-audiosignals•De-embed4analogueaudiosignals• Applyextraaudiodelay• Swapstereochannels•Makemonoorsumfromstereosignals•Haveopticalinput• Transportasynchronousserialdata•Generatevideoandaudiosignals•De-glitchcorrectlysynchronisedswitchedvideo
network-electronics.com | 125
embedders/De-embedders 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
aav-Hd-dmuX(-R)/ aav-Sd-dmuX(-R)
mEaSuREmENt CONdItIONSaudio Sampling rate 48 kHz
analogue audio output level setting +18 dbu = 0dbFS
ambient temperature 25ºc
gENERaLPower +5V Dc 0.69a 3.5W
+-15V Dc 0.02a 0.6W
control DiP switches, gYDa system controller.
Monitoring Front panel leDs, gYDa system controller and gPi.
eDH/crc processing Full. received flags are updated, new crcs are calculated.
boot time 1.2 second
Digital audio outputs conform to aeS3-2003
Video inputs and outputs conform to SMPTe 292M-1998
Data input and output conform to eia rS-485
PROCESSINgVideo latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values.
SD LatencieSVideo des+4+350+256+2+ser video samples =
45.3us
audio embedding aeS+2+1+16 audio samples=20/48000 = 417us
audio de-embedding 4+16+1 audio samples =21/48000 = 438us
embedding gPi mode 8+4+32 96kHz samples =44/96000 = 458us
embedding uarT mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms
De-embedding gPi mode 8+32+8 96kHz samples =44/96000 = 458us
De-embedding uarT mode 8+32+8 96kHz samples =48/96000 = 458us
hD LatencieSVideo des+8+1024+1024+3+ser video samples =
27.6us
audio embedding aeS+2+1+8=12 /48000 = 250us
audio de-embedding 2+8+1=11/48000 = 229us
embedding gPi mode 8+4+16 96kHz samples =28/96000 = 292us
embedding uarT mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms
De-embedding gPi mode 4+16+8 96kHz samples =28/96000 = 292us
De-embedding uarT mode 4+16+8 96kHz samples =28/96000 = 292us
ELECtRICaL vIdEO INPutaaV-hD-DmuX Video Data rate 270Mbps or 1,485gbps
Video frame rate 24p, 25i, 30i, 50p or 60p and pull down rates. PsF formats are handled as interlaced.
aaV-SD-DmuX Video Data rate 270Mbps
Video frame rate 25i and pull down 30i rates
equalisation automatic up to 35db
impedance 75 ohm
return loss >15db up to 1,5gHz
Signal level Nom. 800mV
connector bNc
OPtICaL vIdEO INPutOptical wavelength 1200-1620nm ±40 nm
Maximum Optical power 0 dbm HD PiN.
Minimum Optical power HD/ SD -24/-28 dbm with HD PiN.
return loss better than 27 db.
Maximum reflected power 0,04
Transmission circuit fibre Single mode HD PiN/ (Multi-mode option on request). Multi-mode PiN is standard with aaV-SD-DMuX
connector Sc/uPc
data INPutSrS422 1
connector Modular jack 8P8c
packet or uart moDe baud rates 9600 to 115200
Data length 7 or 8 bits
Parity None, odd or even
Stop bits 1, 1.5 or 2 bits
Gpi moDe raw data sampling frequency 93750 Hz
ELECtRICaL vIdEO OutPutNumber of HD/SDi outputs 1
connector bNc
impedance 75 ohm
return loss > 15 db to1.5gHz
Signal level nom. 800mV.
rise/fall time typically 650ps. @270Mbps. < 270ps @1.485gbps
aNaLOguE audIO OutPutSNumber of outputs 4
Sampling frequency 48 kHzDifferential output impedance 53 ohmscommon mode output impedance 20 kohm
connector (c1 backplane) Db-25 female.Maximum signal level (0 dbFS) +24dbu or lower in 0.5 db steps. +-0.1 db
tolerancecommon mode voltage tolerance + 50V, -0V
Frequency response 20 Hz – 20 kHz +-0.2 db
Pass-band ripple +- 0.002 db
Stop band attenuation 82 db
Dynamic range Min. 98 db (a) @ +12dbu = 0dbFS Max. 110 db(a) @ +24dbu = 0dbFS
THD+N @ -1 dbFS Max. -90 db, typical -96 db.
intermodulation distortion Max. -90 db
crosstalk Max. -90 db, typical -95 db.
cMrr (1kHz bbc method) Max. 46 db, typical 65 db.
dIgItaL audIO OutPutSNumber of aeS3 outputs 4
audio data rate 48 kHz
impedance (c1 backplanes) 110 ohm transformer balanced.
connector (c1 backplanes) Db-25 female.
data OutPutSNumber of rS485 outputs 1
connector Modular jack 8P8c
gPI OutPutSSignals Power status good, no video input lock,
laser failure.
connector Modular jack 8P8c
Signal type Open drain transistor with free-wheel diode.
Maximum voltage 100 V
Maximum current 150 ma
126 | network-electronics.com
embedders/De-embedders
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
analog audio and video transport module
• 4channelanalogaudioandvideoembedder• Terminationswitchesandloopconnectorsforinputvideo•Cascadableforadditionalaudiochannels• EDHinsertion• 20or24bitaudioprocessing•Optionalwithopticaloutput(AVA-MUX-xxT)
mEaSuREmENt CONdItIONSaudio Sampling rate 48 kHz
ambient temperature 25ºc
Measurement bandwidth 20 Hz-20 kHz
Detector rMS
input overload level (0 dbFS) +18 dbu
gENERaLPower +5V Dc 0.94a 4.7W
+15V Dc 0.063a 0.95W -15V Dc 0.027a 0.4W
control DiP switches, gyda system controller
Monitoring Front panel leDs and gyda system controller
eDH processing Full. received flags are updated, new crcs are calculated
embedding level SMPTe S272M c Synchronous audio at 48 kHz and extended data packets (24 bit optional).
embedded audio word length configurable 20 or 24 bits.
Video processing word length 10 bits
audio delay 0.79 ms
Video delay 132.3 μs
audIO INPutSNumber of analog inputs 4
Differential impedance 25 kohm, electronically balanced
connector Db25 pin, female
Maximum signal level configurable +12dbu to +24dbu (= 0dbFS)
common mode voltage tolerance ±30 V
Frequency response 20Hz – 20kHz ±0.db
Passband ripple ±0.035db
Stop band attenuation 95db
Dynamic range1) Min. 101db(a) (0dbFS = +12dbu), Typ. 107db(a)
THD+N @ -1db FS Max. -85db, Typ. < -95dbintermodulation distortion2) @–12db FS Max. -90db
crosstalk Max. -80db, 20Hz – 20kHz, Typ. -95db
cMrr (0 Hz – 8kHz) Min. 70db, Typ. 80db
SdI OutPutVideo Data rate 270Mbps
Number of SDi outputs 1
connector bNc
impedance 75ohm
return loss > 15db @270MHz
Signal level nominal. 800mV
rise/fall time typically 650ps
OPtICaL OutPut (OPtIONaL)Transmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ±40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ±40nm
Optical power 0dbm
Optical wavelength for cWDM See page 153
Optical power 0dbm
Jitter (ui=unit interval) Max. 0.135 ui
return loss Typ. > 40db
Maximum reflected power 4%
connector Sc/uPc
gPIgPi Output Power good, SDi unlock, embed error, audio
overload1, audio overload2
gPi connector rJ45
Signal type Open collector transistor
Maximum voltage 50V
Maximum current 400ma if only one output driven, 100ma all outputs driven
1) (THD+N of –60db FS signal)| + 60
2) SMPTe 4:1 60 Hz + 7kHz
ava-muX, ava-muX-xxt
CVBS or Y
Audio 1L
Audio 1R
Audio 2L
Audio 2R
Line 1 Marking
EDHprocessor
SDI
OpticalOutput
CVBS or C
Embedder Serialiser
Occupies two slots
network-electronics.com | 127
embedders/De-embedders 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
analog audio and video transport module
• 4channelanalogaudioogvideode-embedder• Componentandcompositevideooutputs•Cascadableforadditionalaudiochannels• EDHhandling•Optionalwithopticalinput(AVA-DMUX-R)
mEaSuREmENt CONdItIONSaudio Sampling rate 48kHz
ambient temperature 25 Oc
Measurement bandwidth 20 Hz-20kHz
Detector rMS
input overload level (0dbFS) +18dbu
gENERaLPower +5V/5.3W, +15V/1.5W, -15V/1.3W
control DiP switches/gYDa-Sc
Monitoring Front panel leDs and gYDa-Sc
eDH processing Full. received flags are updated, new crcs are calculated
De-embedding level SMPTe S272M c – Synchronous audio at 48kHz and extended data packets
audio Delay 0.67 ms (12+20 audio samples)
Video Delay 5.1us in minimum delay mode, 40ms or greater if frame buffer is used
SdI vIdEO INPutVideo Data rate 270Mbps
Video frame rate 50 Hz or 60 Hz
equalization automatic up to 35db
impedance 75ohm
return loss >15db @270MHz
Signal level nominally 800mV
connector bNc
OPtICaL INPut (OPtIONaL)Transmission circuit fiber Multi mode 50/125um,
Single mode 9/125um comp.
Optical wavelength 1200-1620nm
Maximum Optical power 0dbm
Sensitivity -20dbm, typ. -25dbm
return loss better than 40db typ
Maximum reflected power 4%
connector Sc/uPc
ava-dmuX, ava-dmuX-R
OpticalInput
BB
SDI
Audio 2RAudio 2L
Audio 1RAudio 1L
Y, G or CVBS
U, B or Y
Y, R or C
CVBS, Y or BB
Reclockerdeserialiser
De-embedder
FrameSynchroniser
Occupies two slots
BLaCk BuRSt REFERENCE INPutinput signal SMPTe 170M / Pal iTu 624-4
return loss > 35db up to 5.75MHz
Termination 75ohm
vIdEO OutPutSNumber of video outputs 4
Formats YuV+cVbS, rgb+cVbS, Yc+Y+cVbS, Yc+bb+cVbS
connector bNc
impedance 75ohm
return loss > 35db up to 5.75 MHz
Signal level 1V
audIO OutPutSNumber of analog outputs 4 electronically balanced
audio sampling frequency 48kHz
impedance 50ohm differential, 5 kohm common mode
connector 25 pin D-sub
De-embedded audio word length up to 24 bits
Frequency response1) 20Hz – 20kHz
Dynamic range2) > 106db(a)
THD+N @ 0dbFS better than 0.01%, –80db
intermodulation distortion3) better than 0.01%, –80db
crosstalk < -90db
Noise < –75dbqp ccir-468 weighted, < –90dbu a-weighted
gPIgPi Output Power good, SDi unlock, de-embed error,
audioa invalid, audiob invalid
gPi connector rJ45
Signal type Open collector transistor
Maximum voltage 50 V
Maximum current 400 ma if only one output driven, 100 ma all outputs driven
1) ±0.1db relative to the level at 500 Hz
2) |THD+N @ -60dbFS a-weighted| + 60
3) SMPTe iM, 60 Hz + 7kHz 4:1 @ -12dbFS (rMS)
128 | network-electronics.com
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
The global Video Transport leader
network-electronics.com | 129
HD to SD Downconverter with Framesync and arc 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Hd down-Converter with Optical Input and audio decoding
dWC-Hd-dmuX
gENERaLPower 5V, +/-15V Dc, <7W
control DiP switches, gYDa system controller.
Monitoring Front panel leDs, gYDa system controller.
ELECtRICaL vIdEO INPutVideoDatarate 270Mbpsor1,485Gbps;ConformtoSMPTE
292M-1998, SMPTe 259M-c
Videoframerate 1080i/29.97;1080p/23.976;1080i/25;1080p/25;720p/59.94;720p/50
equalization automatic up to 35db (eq. 300m @270Mbps with belden 8281 / 100m @1485Mbps with belden 1694a)
impedance 75 ohm
return loss >15db up to 1,5gHz
Signal level nom. 800mV
connector bNc
OPtICaL vIdEO INPutOptical wavelength 1200-1620nm
Maximum Optical power –3 dbm HD PiN.
Minimum Optical power HD/ SD –22/–28 dbm with HD PiN.
return loss better than 27 db.
Maximum reflected power 4%
Transmission circuit fiber Single mode HD PiN/ (Multi-mode option on request)
connector Sc/uPc
ELECtRICaL vIdEO OutPutNumber of HD/SDi outputs 2
connector bNc
impedance 75 ohm
return loss > 15 db to1.5gHz
Signal level nom. 800mV.
Number of analog Video outputs 3
analog Video output formats 3 x cVbS. component g/b/r, component Y/Pb/Pr or S-video. Pal and NTSc.
connector bNc
impedance 75 ohm
return loss > 35 db to30 MHz
audIO OutPutSNumber of aeS3 outputs 1
aeS3 audio data rate 48 kHz
connector aeS3 rJ45
Number of balanced analog stereo audio outputs 1
connector analog audio WecO screw terminal
vERSIONS / OPtIONSDWc-HD HD down converter, SD/cVbS output
DWc-HD-DMuX HD down converter, SD/cVbS output, aeS/ebu and Stereo analog audio output
DWc-HD-r HD down converter with high sensitivity 9/125um single mode optical input, SD/cVbS output
DWc-HD-DMuX-r HD down converter with high sensitivity 9/125um single mode optical input, SD/cVbS output, aeS/ebu and Stereo analog audio output
DWc-HD-M HD down converter for monitoring applications, SD/cVbS output, without genlock
DWc-HD-M-DMuX HD down converter for monitoring applications, SD/cVbS output, without genlock, aeS/ebu and Stereo analog audio output
DWc-HD-M-r HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/cVbS output, without genlock
DWc-HD-M-DMuX-r HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/cVbS output, without genlock, aeS/ebu and Stereo analog audio output
Video Dac
Stereo audioDac
SDre-embedder
audio Matrix
Frame buffer
audio buffer
Down Scaler
audio Proc
2x2 x-point
HD/SD OuT
HD/SD OuT
cVbS/cVbS/Y/g
analog Video Outputs
cVbS/Y/cb/b
cVbS/c/cr/r
Stereo audioanalog OuT
Digitalaudio OuT
HD/SDDe-ebedder
HD/SD inputOptical
HD/SD inputelectrical
reclocker/De-serialiser
SD
SDSDHD
Digital audio
• Broadcastquality•Opticalinputwithdirectreclockedelectricaloutput•Highqualitydown-conversion• Analogaudiomonitoring• SDIandanaloghighqualityvideooutput• Audiodelay• Internalvideoandaudiogenerator• SDframestorefordown-convertedoutput• Syncinput• PhaseTru™technologyimproves1080ito576i/480iconversion
130 | network-electronics.com
Video conversion
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
NtSC/PaL to SdI decoder
• 10-bitcompositetoSDIdecoder• Automaticstandardsdetection• EDHprocessing• 2xoversampling(27MHz)• Analoginputsw/loop-through,3SDIoutputs• 3-lineadaptivecombfiltersandselectablefiltersettings
INPutFormats composite Video Pal (625/50) NTSc
(525/60) Y/c (S-Video), with active loop-through
return loss >35db up to 5.75MHz
Signal level nom 1000mV, ± 10mV
OutPutSignal (3x) 4:2:2 SMPTe 259M-c, 270Mbps
return loss > 15db @ 270MHz
Signal level nom. 800mV
PROCESSINg PERFORmaNCE Quantisation 10 bits
Sampling 27MHz (2x oversampling)
Video bandwidth 6MHz
SNr (unweight) > 60db
Diff. gain < 0.6%
Diff. phase < 1.00°
Power + 5VDc / 2.2W, - 15VDc / 0.7W
SELECtaBLE Luma/CHROma SEPaRatION FILtERS•Adaptive3-linecombfilter•Fixed2-linecombfilter•Low-pass/bandpass
adC-SdI
Loop
SDI 2
Loop
CVBS/Y
CVBS/C
Genlock
PAL/NTSCField 1
InsertionDecoder
Microcontroller
EDHADC
SDI 3
RemoteControl
SDI 1
video a/d Converter and decoder
• 10-bitcomponent,compositeorY/CtoSDIconverter• Built-invideoPROC-AMP• 3SDIoutputs• 5lineadaptivecombfilterandselectablefiltersettings• Automaticstandardsdetection• EDHprocessing
dIgItaL SERIaL OutPut Signal type SMPTe 259M / iTu-r bT.601
connector bNc
impedance 75ohm
return loss >15db @ 270MHz
Jitter < 0.2ui
Peak to peak signal level 800mV ± 80mV
COmPOSItE aNd y/C INPutSignal type composite video, Pal 625/50Hz or NTSc
525/60Hz Y / c (S-video)
connector bNc
impedance 75ohm
Signal level 1Vp-p
return loss >40db
COmPONENt aNd RgB INPutSignal rate 625/50Hz or 525/60Hz
Signal type rgb without setup, with separate sync. SMPTe / ebu Y, cr, cb
connector bNc
impedance 75ohm
Signal level Y = 1Vp-p. cb, cr, r, g, b = 0.7Vp-p
return loss >40db
PROCESSINg PERFORmaNCESignal path 10 bits
Sampling 27MHz, 2 x oversampling
luma/chrome separation Selectable 5 line adaptive comb filter or chroma trap filter
Video bandwidth 6MHz
Hue accuracy 0.5° typical
color Sat. accuracy 0.8% typical
luminance Nonlinearity 0.6% typical
SNr (unified weighted) 66db typical
Diff. gain <1.0%
Diff. phase <1.0°
Video processing delay 3 video lines
Power +5V Dc / 2.75W, -15V Dc / 0.5W
adC-SdI-CC
SDI 2PAL/NTSC
Field 1Insertion
Microcontroller
EDHDecoder
ADC
SDI 3
RemoteControl
SDI 1
Genlock
VideoBuffer
CVBS/Lum2
Green/Y
Red/Pr
Blue/Pb/Crom2
network-electronics.com | 131
Video conversion 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
SdI to NtSC/PaL Encoder and d/a Converter
• 10-bitSDItocompositeencoderand10-bitSDItocomponent converter in one product
• Built-inframesynchronizerw/sub-carrierandhorizontalphase adjustment
• Largeframebuffer(4frames)• EDHmonitoring• 4xoversampling(54MHz)• SDIinputw/loop-through,4analogoutputs
dIgItaL SERIaL INPutSignal 4:2:2 SMPTe 259M-c, 270Mbps, with active
loop through
equalization automatic
impedance 75 ohm
return loss >15db @ 270MHz
Signal level nom. 800mV
connector bNc
BLaCk&BuRSt INPutinput Signal composite Pal 625/50 or NTSc 525/60
return loss > 35 db up to 10MHz
dIgItaL SERIaL OutPutconnector bNc
impedance 75 ohm
return loss >15db @ 270MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
FRamE dELay OutPutOutput level Open collector pulled high to 5V.
aNaLOg OutPutconnector bNc
impedance 75 ohm
Formats composite video, Pal 625/50 or NTSc 525/60, rgb, YuV / Ycrcb Y / c (S-video), composite and component video is provided simultaneously
Signal level 1Vp-p
return loss >35db up to 10MHz
Minimum signal delay 3µs
Signal delay when locked to black&burst 1-2 Frames
PROCESSINg PERFORmaNCESignal path 10 bits
Sampling 54MHz, 4 x oversampling
Video bandwidth 6MHz
Hue accuracy 0.5° typical
color Saturation accuracy 0.8% typical
luminance Nonlinearity 0.6% typical
chroma aM Noise -62db typical
chroma PM Noise -72db typical
SNr -70db typical
Diff. gain <1.0%
Diff. phase <1.0°
Power +5V Dc / 3.1W, -15V Dc / 0.7W
daC-SdI
Loop
R/V/Luma
SDI
Microcontroller
CVBS/Y/Black Burst
RemoteControl
B/U/Cuma
G/Y/CVBS
EDH
10-BitEncoder/
DAC
EQ
Genlock
Re-clockerFrameBuffer Filter
H-PhaseAdj.
132 | network-electronics.com
audio conversion
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
dual audio d/a Converter
• 24-bithighperformanceAEStoanalogaudioconverter
• Twoindependentconvertersononeboard• Typicaldynamicrangeof120dBA• TransformerbalancedAESinputs• Allowssamplingratesfrom32–96kHz
aNaLOg OutPutSNumber of outputs 2x 4 electronically balanced
Frequency response 20Hz > –0.1db > 20kHz
Passband ripple ±0.0002db
group delay 43.5 samples
Stopband attenuation 110db
Dynamic range Min. 112dba, Typ. 120dba
THD+N @ -1db FS Max. –90db, Typ. –100db
crosstalk Max. –100db, Typ. –110dbOutput differential impedance 50 ohm
aES audIO INPutNumber of inputs 2 transformer. balanced
Format aeS3-1992
impedance 110ohm
connector Db15-110ohm
Sampling rates 29kHz–100kHz
gENERaLPower +5V/1.4W / ±15V/3.5W
control control system for access to set-up and module status with biTe (built-in Test equipment)
daC-aES
AESReceiver
Re-clocker
AES1ANA1A
ANA2A
D/A Lowpassfilter + gain
ANA1B
ANA2B
AES2II
Microcontroller RemoteControl
ANA3A
ANA4A
ANA3B
ANA4B
dual audio a/d Converter
• 24-bithighperformanceanalogaudiotoAESconverter
• Twoindependentconvertersononeboard• Typicaldynamicrangeof117dBA• TransformerbalancedAESoutputs• Internalsamplingrates44.1,48and96kHz
Also available with 75ohm AES-3id backplane
aNaLOg INPutSNumber of inputs 4 electronically balanced
Frequency response 10Hz > –0.1db > 21.5kHz
Passband ripple ±0.001db
common mode voltage tolerance +/- 30V
group delay 65 samples
Stopband attenuation 110db
Dynamic range Min. 112dba, Typ. 117dba
THD+N @ -1db FS Max. -95db, typ. -102db
crosstalk Min. –100db, Typ. –110db
cMrr Min. 70db, Typ. 80dbinput differential impedance 25kohm
aES audIO OutPutS aNd SyNC. REF INPutNumber of outputs 2x2 transformer. balanced
Format aeS3-1992
impedance 110ohm
connector Db15-110ohm
internal sampling rates 44.1kHz, 48kHz, 88.2kHz
external synchronisation aeS3 on Db15 connector
Sync. input impedance 110ohm
external sampling rates 29kHz–100kHz
gENERaLPower +5V/2.4W / ±15V/2.1W
control control system for access to setup and module status with biTe (built-in Test equipment)
adC-aES
ANA1
ANA2
A/DBal. InputGain
SettingAES Format
+ Driver
AESSync. Ref.
AES1B
AES2B
AES2AANA3
ANA4
Clock Control PLD
AES Receiver Microcontroller RemoteControl
AES1A
network-electronics.com | 133
Synchronisation 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
dual aES audio delay
• 2independentaudiodelaysignalpaths• Built-insamplerateconverteraccepting32,41.1,44.1kHz• Black-burstandAES-11referenceinput•Upto10sdelayat48kHz• Simultanousfixeddelayandexternallyswitchabledynamic
delay•DelaytrackinginputforsynchronisationwithDAC-SDI,FRS-
SDi or other video devices• 2AESoutputsperdelayline• TransformerbalancedAESin-andoutputs
gENERaLPower +5V Dc approx. 0.3a 1.5W
control DiP switches, gYDa-Sc
Monitoring Front panel leDs and gYDa-Sc
INPutS (aES3-1995)Number 2
connector Db25 femaleSample rate converterword-length 24 bits
Sample rates any between 1/3 and 3 times the reference sample rate
REFERENCE INPutFormat aeS11 (aeS-3-iD) or analog video
connector bNcreference Sample rate from video 48kHz
Sample rates from 48, 44.1, 32kHz
OutPutS (aES3-1995)Number 4
connector Db25 female
usage either dual outputs from delay lines 1 & 2 or quad outputs from delay line 1
dELayMinimum delay 92 samples at 48kHz
Maximum tracking delay 230ms
Maximum fixed delay @ 48kHz 10.6s
Maximum fixed delay @ 44.1kHz 11.6s
Maximum fixed delay @ 32kHz 16.1s
dLy-aES
Microcontroller RemoteControl
AES 2 (2)
AES 2 (1)
AES 1 (2)
AES 1 (1)
Black Burst
Reference Input
Delay Control Input
AES 2
AES 1
Tracking Input
AES-11
GPI x 2
Clock Control PLD
SRC
SRC
Sync. Sep.
Delay Controld
Delay MUX
Delay
Tracking Control
Dip Sw. Setting
d
SdI Line Synchronizer
• SDI10bit4:2:2linesynchronizer• AnalogBlackBurstgenlock• EDHinsertionandhandlinginaccordancewithSMPTE-
rP165• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2linesynchronizedoutputs• Automaticdetectionof525-and625-lineformatinput
dIgItaL SERIaL INPutinput format 270Mbps scrambled NrZi 4:2:2 video
(SMPTe 259M)
equalization automatic up to 30db
Signal level 800mV nominal
return loss >15db @ 270MHz
impedance 75 ohm
connector bNc
dIgItaL SERIaL OutPutOutput format 270Mbps scrambled NrZi 4:2:2 video
(SMPTe 259M)
Number of outputs 3 synchronized outputs, 1 buffered loop of input
Signal level 800mV nominal
rise/fall time typ. 650ps
Jitter 0.2ui max.
return loss >15db @ 270MHz
impedance 75 ohm
connector bNc
REFERENCE INPutinput format black burst, composite analog (NTSc
SMPTe 170M / Pal iTu 624-4)
Signal level 1Vp-p
impedance 75 ohm, loop must be terminated with 75 ohm
connector bNc
dELay adJuSmENtSMinimum delay 39 samples
Maximum delay 1 line + 39 samples
resolution down to video sample resolution
POWERinput voltage 5VDc/3.0W, -15VDc/0.3W
LIS-SdI
Ref
SDI 2
Loop
SDIloop
SDI in
Genlock
EDHinsertor
Microcontroller
SDI 3
RemoteControl
SDI 1
Tracking DelayOutput
Linesynchroniser
Reclocker& EDH-analyser
134 | network-electronics.com
Synchronisation
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
SdI Frame Synchronizer
• SDI10bit4:2:2framesynchronizerwithembeddedaudiohandling
• AnalogBlackBurstgenlock• Selectablefreezeonlastgoodframeorblackvideoonerroror
on loss of input signal• EDHinsertionandhandlinginaccordancewithSMPTE-RP165•Widedelayrange,from128usupto232ms(Sample,HandV
adjustment)• Audiodelaytrackingoutput• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2synchronizedoutputs• Automaticdetectionof525-and625-lineformatinput
dIgItaL SERIaL INPutinput format 270Mbps scrambled NrZi 4:2:2 video
(SMPTe 259M)
equalization automatic up to 30db
Signal level 800mV nominal
return loss >15db @ 270MHz
impedance 75 ohm
connector bNc
dIgItaL SERIaL OutPutOutput format 270Mbps scrambled NrZi 4:2:2 video
(SMPTe 259M)
Number of outputs 3 synchronized outputs, 1 buffered loop of input
Signal level 800mV nominal
rise/fall time typ. 650ps
Jitter 0.2ui max.
return loss >15db @ 270MHz
impedance 75 ohm
connector bNc
REFERENCE INPut input format black burst, composite analog (NTSc
SMPTe 170M / Pal iTu 624-4)
Signal level 1Vp-p
impedance 75 ohm, loop must be terminated with 75 ohm
connector bNc
dELay adJuStmENtS Minimum delay 120us or 2 video lines
Maximum delay 232ms
resolution down to video sample resolution
POWERinput voltage 5VDc/3.0W, -15VDc/0.3W
FRS-SdI
Ref
SDI 2
Loop
SDIloop
SDI in
Genlock
EDHinsertor
Black VideoGenerator
Microcontroller
SDI 3
RemoteControl
SDI 1
Tracking DelayOutput
Frame synchroniser
and Delayadj.
Reclocker& EDH-analyser
network-electronics.com | 135
Synchronisation 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Hd frame synchroniser with optical input
gENERaLPower 5V, +/-15V Dc, <5W
control DiP switches, gYDa system controller.
Monitoring Front panel leDs, gYDa system controller and gPi
eDH/crc processing Full. received flags are updated, new crcs are calculated
ELECtRICaL vIdEO INPutVideoDatarate 270Mbpsor1,485Gbps;ConformtoSMPTE
292M-1998, SMPTe 259M-c
Video frame rate 24p, 50i, 60i, 50p or 60p and pull down rates
equalization automatic up to 35db (eq. 300m @270Mbps with belden 8281 / 100m @1485Mbps with belden 1694a)
impedance 75 ohm
return loss >15db up to 1,5gHz
Signal level nom. 800mV
connector bNc
OPtICaL vIdEO INPutOptical wavelength 1200–1620nm
Max. Optical power -3dbm HD PiN
Min. Optical power HD/ SD -22/-28dbm with HD PiN.
return loss better than 27db
Max. reflected power 4%
Transmission circuit fiber Single mode HD PiN/ (Multi-mode option on request)
connector Sc/uPc
ELECtRICaL vIdEO OutPutNo. of HD/SDi outputs 4
connector bNc
impedance 75 ohm
return loss > 15 db to1.5gHz
Signal level nom. 800mV.
audIO/ data OutPutSNumber of aeS3 / rS-422 data outputs 1
aeS3 audio data rate 48 kHz
connector aeS3 / rS-422 rJ45
Number of analog stereo audio outputs 1
connector analog audio WecO screw terminal
gPI OutPutSSignals Power status good, no video input lock,
Frame delay
connector rJ45
Signal type Open drain transistor with free-wheel diode
aPPLICatIONSany professional broadcast application where HD/SD frame synchronisation is requested.
vERSIONS / OPtIONSFrS-HD-SDi SD/HD frame sync with internal audio
handling and gPi i/O control, 4 SDi outputs
FrS-HD-DMuX SD/HD frame sync, analog stereo audio out, aeS out (or rS-422 data out, replaces aeS), 4 SDi outputs
FrS-HD-SDi-r SD/HD frame sync with high sensitivity 9/125um single mode optical input, internal audio handling and gPi i/O control, 4 SDi outputs
FrS-HD-DMuX-r SD/HD frame sync with high sensitivity 9/125um single mode optical input, analog stereo audio out, aeS out (or rS-422 data out, replaces aeS), 4 SDi outputs
FRS-Hd-dmuX
•Opticalinput(option)•HD/SDvideosupport•De-glitchingofinputsignal.• Audiode-embedding–processing–re-embedding• Audiofadeout/fadein• Audiorouter• Audiodelay• FrameSync,adjustableupto8frames•Change-overandinputprioritybetweenopticaland
electrical input, selectable• Syncinput,eitherPAL,NTSCorHDTri-level• Videoluma,chroma,gainandleveladjustment• 4videooutputs,eitherreclockedinputorframe
synchronised• AES3(48kHz),orRS-422dataavailableon1port,
synchronous to video signal• FramedelayoutputonGPIconnector
136 | network-electronics.com
Hd Changeover
•Multi-ratechangeover•Non-broadcastdataratesalsosupportednon-reclocked• Autochangeoveronsignallossorreclockerror•Configurablechangebacklogic• Reportssignallossandbitrate•GPIcontrolandalarms• IntegratedDAwith4re-clockedHD/SDIoutputs
ELECtRICaL INPutNumber of input 2
Data rate NrZ 1 to 1485Mbps
equalization automatic. cable reclocker can be bypassed to support bit rates down to 1Mbps
impedance 75 ohm
return loss >= 15db @ 1485MHz
Signal level nom. 800mV. app. 200mV min. when equaliser switched to bypass
connector bNc
ELECtRICaL OutPutNumber of outputs 4
connector bNc
impedance 75 ohm
return loss >= 15db @ 1485MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity 2 outputs non inverting, 2 outputs inverting
FEatuRESre-clocking automatic clock rate detection.
Supported clock rates: 143, 177, 270, 360, 540 and 1485Mbps
gENERaLPower +5V Dc / 3W Max.
control control system for access to set-up and module status with biTe (built-in Test equipment)
SuPPORtEd StaNdaRdSSMPTe SMPTe 292M, SMPTe 259M,
SMPTe 305.2M, SMPTe 310M, SMPTe 344M
DVb-aSi eN50083-9
HdSdI-CHO-2X1
ReclockerSwitch2 x 1
Bypass 177M / ASI
MicrocontrollerRemoteControl
Equaliser
Bypass
HD/SDMain input
Equaliser
Bypass
HD/SDStandby input
HD/SD1Outputs:
HD/SD2
HD/SD3
HD/SD4
SdI Changeover
• SDIchangeover•Non-broadcastdataratesalsosupportednon-reclocked• Autochangeoveronsignallossorreclockerror•Configurablechangebacklogic• Reportssignallossandbitrate•GPIcontrolandalarms• IntegratedDAwith4re-clockedSDIoutputs
ELECtRICaL SIgNaL INPutSNumber of inputs 2
Standard SMPTe 259M
Data rate 1Mbps–540Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5MHz–270MHz)
cable equalization 0 to 300m typical belden 8281a
ELECtRICaL SIgNaL OutPutSNumber of outputs 4
connector 75 ohm bNc female
Signal level 800mVp-p ±10%
Signal Polarity 2 outputs non-inverting, 2 outputs inverting
impedance 75 ohm nominal
return loss > 15db (5MHz–270MHz)
FEatuRESre-clocking rates 143, 177, 270, 360, 540Mbps
Supported standards SMPTe 259M, 305.2M, 344M, 310M, DVb-aSi eN50083-9, aeS-3id
re-clocking configurable automatic mute or bypass when not locked
input equaliser bypass for non-video formats
CONtROL INtERFaCEScontrol control system for access to set-up and
module status with biTe (built-in Test equipment)
ELECtRICaLPower +5V Dc / 3W
SdI-CHO-2X1
ReclockerSwitch2 x 1
Bypass 177M / ASI
MicrocontrollerRemoteControl
Equaliser
Bypass
SDMain input
Equaliser
Bypass
SDStandby input
SD1Outputs:
SD2
SD3
SD4
automatic changeover Modules
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
network-electronics.com | 137
Optical converters 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
SdI Electrical to Optical Converter
• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/297Mcompliant
SdI-EO-13t/15t
gENERaL Power
+5V Dc / 1.6W
control control system for access to set-up and module status with biTe (built-in Test equipment)
OPtICaL OutPut Transmission circuit fiber
Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Jitter (ui=unit interval) 0.135 ui max.
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc according to SMPTe-297M
CWdm
gENERaL Power
+5V Dc / 1.6W
control control system for access to set-up and module status with biTe (built-in Test equipment)
OPtICaL OutPut Transmission circuit fiber
Single mode 9/125um
light source DFb laser
Optical wavelength See page 153
Optical power 0dbm
Jitter (ui=unit interval) 0.135 ui max.
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc according to SMPTe-297M
dWdm
gENERaLPower
+5V Dc / 10W Max. 5W typically
control control system for access to set-up and module status with biTe (built-in Test equipment)
OPtICaL OutPutTransmission circuit fiber
Single mode 9/125um
light source DFb laser
Optical centre wavelength See page 153
Optical power 0dbm (optionally +5dbm)
Max. wavelength drift ± 0.16nm
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc acc. to SMPTe 259M
SdI-EO
Optical Transmitter
EqualiserSDI Input19.4-540Mbps
2 x SDIOutput
OpticalOutput
Distribution Amplifier
INPutS Data rate NrZ 19.4Mbps – 540Mbps
equalization auto. up to 35db
impedance 75 ohm
return loss >15db @270MHz
Signal level nom. 800mV
connector bNc
SdI OutPut
Number of outputs 2
connector bNc
impedance 75 ohm
return loss > 15db @270MHz
Signal level nom. 800mV
rise/fall time typ. 650ps
StaNdaRdS
Supported standards for electrical and optical ports:SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310MDVb-aSi eN50083-9
138 | network-electronics.com
dual SdI Electrical to Optical Converter
•High-densitypackagingintheultracompact2RUframe• 1310nm,1550nmandCWDMlaseravailable•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• ActiveloopedSDIoutput• Alsoavailablewithreclocking
INPutSData rate NrZ 19.4 to 540Mbps
equalization automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps
impedance 75 ohm
return loss >15db @ 270MHz
Signal level nom. 800mV
connector bNc
gENERaL
Power +5V Dc / 3.5W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
ELECtRICaL OutPut
Number of outputs 1 per converter
connector bNc
impedance 75 ohm
return loss >15db @ 270MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity Non inverting
OPtICaL OutPut
Transmission circuit fiber Single mode
light source F-P / DFb laser
Optical power -7.5dbm @1310nm, 0dbm (DFb laser)Optical centre 1310, 1550 or cWDM wavelength See page 153
Temp. range 0 to +40 °c
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps,
connector return loss >40db w/SM fiber
Maximum reflected power 4%
connector Sc/uPc
StaNdaRdS
Supported standards for electrical and optical ports:SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310MDVb-aSi eN50083-9
SdI-EO-2
Microcontroller RemoteControl
Equaliser
Bypass
SD/ASI Input 219.4-540Mbps SD/ASI
Output 219.4-540Mbps
SD/ASI Output 119.4-540Mbps
Equaliser
Bypass
SD/ASI Input 119.4-540Mbps
Optical Transmitter
OpticalOutput 2
Optical Transmitter
OpticalOutput 1
Optical converters
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Bypass 177M/ASI
Reclocker
Bypass 177M/ASI
Reclocker
Microcontroller RemoteControl
#2 x 2
Equaliser
Bypass
SD/ASI Input 219.4-540Mbps SD/ASI
Output 219.4-540Mbps
SD/ASI Output 119.4-540Mbps
Equaliser
Bypass
SD/ASI Input 119.4-540Mbps
Optical Transmitter
OpticalOutput 2
Optical Transmitter
OpticalOutput 1
also available with reclocking(SDi-eO-2-rc)
network-electronics.com | 139
Optical converters 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
SdI Optical to ElectricalConverter
•Highsensitivityreceiver• Built-indualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/297Mcompliant
OPtICaL INPut Data rate optical 19.4Mbps – 540Mbps
Sensitivity SDi-Oe-S –20dbm typ.
SDi-Oe-l better than –30dbm typ. MF-Oe-S-Nrc –20dbm typ.
Maximum input power SDi-Oe-S -6dbm SDi-Oe-l 0dbm
Optical wavelength 1200-1620nm
Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible
return loss better than 40db w/Single mode fiber (typ.)
Detector overload threshold min. –6dbm, typ. –3dbm
connector Sc/uPc
gENERaL Power SDi-Oe-S and MF-Oe-S-Nrc
+ 5V Dc /1.7W
Power SDi-Oe-l +5V Dc/1.6W, -15V Dc/0.15W
control control system for access to set-up and module status with biTe (built-in Test equipment)
SdI OutPut Number of outputs 2
connector bNc
impedance 75 ohm
return loss > 15db @270MHz
Signal level nom. 800mV
rise/fall time typ. 650ps
Jitter (ui= unit interval) 0.2 ui max.
SdI-OE-S / SdI-OE-L / mF-OE-NRC
Optical Receiver SDI Input Processor
OpticalInput
2 x SDI Output19.4–540Mbps
Distribution Amplifier
Reclocker
dual SdI Optical to ElectricalConverter
•High-densitypackagingintheultracompact2RUframe•Highsensitivityreceiver• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswapand emergency switching• Re-clockerbypassfornon-videoformats• 2OutputDistributionAmplifier
OPtICaL INPutData rate optical 19.4 to 540MbpsSensitivity:for SDi (270Mbps) better than –30dbm
Detector overload threshold min. -6dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible
connector return loss >40db w/SM fiber
Detector damage threshold >+1dbm
connector Sc/uPc
gENERaLPower +5V Dc / 3.2W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
ELECtRICaL OutPutNumber of outputs 2 per converter
connector bNc
impedance 75 ohm
return loss >15db @ 270MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity 2 non inverting
StaNdaRdS Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310M, DVb-aSi eN50083-9
SdI-OE-2
OpticalInput 1
Bypass 177M/ASI
Reclocker
Bypass 177M/ASI
Reclocker
Microcontroller RemoteControl
Optical receiver
OpticalInput 2
Optical receiver
#2 x 2
2 x ASI /2 x SD / HDOutput 119.4-540Mbps
2 x ASI /2 x SD / HDOutput 219.4-540Mbps
140 | network-electronics.com
Optical converters
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Optical Converter and transponder
OPtICaL INPutData rate optical See table
SenSitiVityfor HD-SDi (1485Mbps) better than –20dbmfor SDi (270Mbps) better than –25dbmfor SDi (270Mbps) better than –30dbm a)
for SDH /SONeT (622Mbps) better than –25dbmfor SDH /SONeT (2488Mbps) better than –20dbmfor 1000baselX (1250Mbps) better than –25dbm
Detector overload threshold min. -3dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Single mode 9/125um
Transmission circuit fiber Multi mode 50/125um, single mode 9/125um compatible a)
connector return loss >40db w/SM fiber
Detector damage threshold >+1dbm
connector Sc/uPc
OPtICaL OutPutTransmission circuit fiber Single mode 9/125um
light source (13T versions) F-P/DFb laser (-7.5dbm or 0dbm)
light source (DWDM/cWDM) DFb laser
Optical power 0dbm (optionally +5dbm for DWDM)
Optical centre wavelength for DWDM See page 153
Optical centre wavelength for cWDM See page 153
Max. wavelength drift +/- 0.16nm (DWDM)
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps, 0.2 ui max. @ 1485Mbps
connector return loss >40db w/SM fiber
Maximum reflected power 4%
connector Sc/uPc
gENERaLPower +5V Dc / 10W Max. 5W typically (DWDM)
+5V Dc / 3W typically (13T and cWDM)
Temperature range 0-40deg c (DWDM), 0-50degc (13T and cWDM)
control control system for access to setup and module status with biTe (built-in Test equip.)
ELECtRICaL INPutData rate NrZ 19.4 to 1485Mbps
Data rate NrZ 19.4 to 540Mbps a)
equalisation automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps.
impedance 75 ohm
return loss >15db @ 1485MHz
return loss >15db @ 270MHz a)
Signal level nom. 800mV
connector bNc
ELECtRICaL OutPutNumber of outputs 2
connector bNc
impedance 75 ohm
return loss >15db @ 1485MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity 1 non inverting, 1 inverting
StaNdaRdSSupported standards for electrical and optical ports (Mr-Tr-2.5g, other versions see table):SMPTe: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M,SMPTe 310M, DVb-aSi: eN50083-9additional supported standards for the optical ports, only opticaltransponder configuration:SDH / SONeT: STM1 / Oc3, STM4 / Oc12, STM16 / Oc 48gigabit ethernet: ieee 802.3, 1000baselX for SM fiberDWDM wavelengths iTu-T g.694.1cWDM wavelengths: iTu-T g.694.2
a) SDi
SdI-tR / SdI-tR-d15XX aNd SdI-tR-C1XXX / mR-tR-2.5g (Stm16 / OC48) / mR-tR-13t / mR-tR-d15XX.XX / mR-tR-C1XXX
•Multirateopticaltoopticaltransponderfor 19.4 – 2488Mbps
•O/E,E/Oconverter• 1550nm,CWDMandDWDMlaser
available • SupportsSDI,HD-SDI,SMPTE310M,
DVb-aSi, SDH/SONeT up to STM-16/Oc-48, gigabit ethernet and many other signal formats
• Performs3RRegeneration
3 x 1MUX
Optical Transmitter
Distribution Amplifier
SDH /1000BaseLX
CDROpticalInput
SD/HD/ASIInput
19.4–1485Mbps
HD/SD/ASICDR
Optical Receiver Input Processor
Equaliser
Bypass
Input / CDR Select
Bypass 177M / ASI
OpticalOutput
1 x ASI /2 x SD / HDOutput
Microcontroller RemoteControl
The Mr-Tr-2.5g is a multi bit-rate converter and transponder module providing high performance media conversion for various signal formats from 19.4Mbps up to 2488Mbps. The unit can be configured as an electrical to Optical or Optical to electrical converter, or as an Optical to Optical Transponder. The unit provides a high sensitivity optical receiver and lasers 1310, 1550, cWDM and DWDM. unmatched signal accuracy, even in critical applications with pathological signal patterns makes the Mr-Tr-2.5g the first choice for all optical transport demands.
The Mr-Tr-2.5g can transport all HD and SD signal formats in addition to DVb-aSi and SMPTe 310M. it can perform optical refreshing, reclocking and wavelength swapping up to 2488Mbps.
The input sensitivity is typically better than –20dbm at 2488Mbps.
The open system platform of Network electronics DWDM multiplexing technology allows easy interoperability with third party fiber optical systems.
The electrical input is equipped with a multi rate cable equaliser providing an equalization of typically 100m of high quality coax cable at 1485Mbps. a distribution amplifier with 2 outputs reduces the need for additional Das (for DVb-aSi only one can be used).
ELECtRICaL PORtS OPtICaL PORtS
Digital video [Mbps]
gbe STM-1/Oc3
STM-4/Oc12
STM-16/Oc48
19.4-540 1483.5 1485
1250 155.52 622.08 2488.32
SDi-Tr X X X X
Mr-Tr X X X X X
Mr-Tr-2.5g X X X X X X
SuPPORtEd SIgNaL FORmatS
network-electronics.com | 141
Optical converters 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Optical Converter and transponder
mR-tR-3g
• Transmitterandreceiverinthesame module
– add and drop signals in a DWDM ring structure
• Fullframepopulationduetoreduced power consumption
– up to 8 modules per frame• 163G-SDIsignals(8ineach
direction) on the same fiber in just 2ru each end
•Upto403G-SDIsignalsonasingle fiber using DWDM
•Highsensitivityopticalreceiver
The Mr-Tr-3g for DWDM completes the second generation DWDM platform in the Flashlink range. The Mr-Tr-3g does everything the lower bit rate transponder modules do, and much more. The extremely low DWDM power consumption of the Mr-Tr-3g allows for up to 8 modules per 2ru frame. Mr-Tr-3g supports bi-directional signals, thereby allowing for full add/drop capabilities in a DWDM ring structure. Furthermore, the support of 3g-SDi (3gHD) single link underlines how powerful this module is. Mr-Tr-3g for
DWDM allows for up to 40 uncompressed 3g-SDi signals on a single strand of fiber. Sensitivity figures for HD-SDi with pathological signal patterns in the range of -30dbm means up to 50% extended reach compared to first generation Mr-Tr modules.
The open system platform of Network electronics DWDM multiplexingtechnology allows easy interoperability with third party fiber optical systems.
OPtICaL INPutData rate optical 19.4 to 2970Mbps
SenSitiVityfor 3g-SDi (2970Mbps) better than –25dbmfor HD-SDi (1485Mbps) better than –30dbmfor SDi (270Mbps) better than –30dbmfor SDH /SONeT (622Mbps) better than –30dbmfor SDH /SONeT (2488Mbps) better than –25dbmfor 1000baselX (1250Mbps) better than –30dbm
Detector overload threshold min. -5dbm
Optical wavelength 1280–1620nm
Transmission circuit fiber Single mode 9/125um
connector return loss >40db w/SM fiber
Detector damage threshold >0dbm
connector Sc/uPc
OPtICaL OutPutTransmission circuit fiber Single mode 9/125um
light source DWDM DFb laser
Optical power 0dbm (optionally +5dbm)
Optical centre wavelength for DWDM See page 153
Max number of ch. per fiber 40
channel spacing 100gHz
Max. wavelength drift +/- 0.16nm
Jitter (ui=unit interval) Max 0.2ui
connector return loss >40db w/SM fiber
Maximum reflected power 4%
connector Sc/uPc
gENERaLPower +5V Dc / 3W, +15V Dc/1.5W
control control system for access to setup and module status with biTe (built-in Test equip.)
ELECtRICaL INPutData rate Nrc 19.4 to 2970 Mbps
Data rate reclocked 270, 1483.5, 1485, 2967 and 2970 Mbps
equalisation automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps
impedance 75 ohm
return loss >15db, 5MHz – 1.5gHz >10db, 1.5gHz – 3gHz
Signal level nom. 800mV
connector bNc
ELECtRICaL OutPutNumber of outputs 2
connector bNc
impedance 75 ohm
return loss >15db, 5MHz – 1.5gHz >10db, 1.5gHz – 3gHz
Jitter (ui=unit interval) Max 0.2ui
Peak to peak signal level 800mV ±100mV
Signal polarity 1 non inverting, 1 inverting
StaNdaRdSSupported standards for electrical and optical ports:SMPTe: SMPTe 292M, SMPTe 259M-c, SMPTe 297M, SMPTe424M, SMPTe 305.2M,
DVb-aSi: eN50083-9additional supported standards for the optical ports, only opticaltransponder configuration:SDH / SONeT: STM1 / Oc3, STM4 / Oc12, STM16 / Oc 48, STM16/Oc48 w/Fec (2670 Mbps)
gigabit ethernet: ieee 802.3, 1000baselX for SM fiber
3 x 1SWITCH
Optical Transmitter
SDH /1000BaseLX
CDROpticalInput
SD/HD/ASIInput
143–2970Mbps(Add 1)
HD/SD/ASICDR
Optical Receiver Input Processor
Equaliser
Bypass
Input / CDR Select
Bypass
OpticalOutput
2 x 1SWITCH
Distribution AmplifierHD/SD/ASICDR
Input / CDR Select
Bypass
1 x ASI /2 x SD / HDOutput
Microcontroller RemoteControl
142 | network-electronics.com
Optical converters
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Hd-SdI Electrical to Optical Converter
• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/292Mcompliant
Hd-EO-13t/-15t
gENERaL Power
+5V Dc / 3W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
OPtICaL OutPut Transmission circuit fiber
Single mode 9/125um
light source F-P laser
Optical power –7.5dbm or –3dbm @ 1310nm 0dbm @ 1550nm (DFb laser)
Optical centre wavelength 1310nm or 1550nm
Max. wavelength drift +/- 20nm @ temp. range 0 to +50 °c
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps 0.2 ui max. @ 1485Mbps
connector return loss >40db w/SM fiber
Maximum reflected power 4%
connector Sc/uPc acc. to SMPTe 259M
CWdm
gENERaLPower
+5V Dc / 3W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
OPtICaL OutPut Transmission circuit fiber
Single mode 9/125um
light source DFb laser
Optical power 0dbm
Optical centre wavelength for cWDM See page 153
Max. wavelength drift ± 6nm
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps 0.2 ui max. @ 1485Mbps
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc acc. to SMPTe 259M
dWdm
gENERaLPower
+5V Dc / 10W Max. 5W typically
control control system for access to setup and module status with biTe (built-in Test equipment)
OPtICaL OutPutTransmission circuit fiber
Single mode 9/125um
light source DFb laser
Optical power 0dbm (optionally +5dbm)
Optical centre wavelength See page 153
Max. wavelength drift ± 0.16nm
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps 0.2 ui max. @ 1485Mbps
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc acc. to SMPTe 259M
Hd-EO-d15XX / Hd-EO-C1XXX / Hd-EO-13t/15t
Optical Transmitter
Equaliser
HD-SDI Input19.4-1485Mbps
2 x HD-SDIOutput
OpticalOutput
Distribution Amplifier
Reclocker
ELECtRICaL INPutData rate NrZ 19.4 to 1485Mbps
equalization automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps
impedance 75ohm
return loss >15db @ 1485MHz
Signal level nom. 800mV
connector bNc
ELECtRICaL OutPut
Number of outputs 2
connector bNc
impedance 75 ohm
return loss >15db @ 1485MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity 1 non inverting, 1 inverting
StaNdaRdS
Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310M DVb-aSi: eN50083-9 DWDM: iTu-T g.694.1 cWDM: iTu-T g.694.2
network-electronics.com | 143
Optical converters 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
dual Hd-SdI Electrical to Optical Converter
• High-densitypackagingintheultracompact2RUframe• 1310nm,1550nmandCWDMlaseravailable•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswapand
emergency switching•MultiformatRe-clocking
ELECtRICaL INPutData rate NrZ 19.4 to 1485Mbps
equalization automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps.
impedance 75 ohm
return loss >15db @ 1485MHz
Signal level nom. 800mV
connector bNc
gENERaLPower +5V Dc / 3.5W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
ELECtRICaL OutPutNumber of outputs 1 per converter
connector bNc
impedance 75 ohm
return loss >15db @ 1485MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity Non inverting
OPtICaL OutPutTransmission circuit fiber Single mode 9/125um
light source F-P / DFb laser
Optical power -7.5dbm @1310nm, 0dbm (DFb laser)
Optical centre wavelength 1310nm or 1550nm
Max. wavelength drift +/- 6nm
Temp. range 0 to +50 °c
Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps, 0.2 ui max. @ 1485Mbps
connector return loss >40db w/SM fiber
Maximum reflected power 4%
connector Sc/uPc
StaNdaRdS Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297, SMPTe 305.2M, SMPTe 310M DVb-aSi: eN50083-9
Hd-EO-2
Bypass 177M/ASI
Reclocker
Bypass 177M/ASI
Reclocker
Microcontroller RemoteControl
#2 x 2
Equaliser
Bypass
SD/HD/ASI Input 219.4-1485Mbps SD/HD/ASI
Output 219.4-1485Mbps
SD/HD/ASI Output 119.4-1485Mbps
Equaliser
Bypass
SD/HD/ASI Input 119.4-1485Mbps
Optical Transmitter
OpticalOutput 2
Optical Transmitter
OpticalOutput 1
144 | network-electronics.com
Optical converters
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Hd-SdI Optical to Electrical Converter
•Highsensitivityreceiver• Built-inquad/dualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/292Mcompliant•Multimodeversionavailable
OPtICaL INPutData rate optical 19.4 to 1485Mbps
SenSitiVity HD-SDi (1485Mbps) better than –20dbm HD-Oe-l better than –24dbm SDi (270Mbps) better than –25dbm HD-Oe-l better than –25dbm
Detector overload threshold Min. -3dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Single mode 9/125um
connector return loss >40db w/SM fiber
Detector damage threshold >+1dbm
connector Sc/uPc
gENERaLPower +5V Dc / 3W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
ELECtRICaL OutPutNumber of outputs 4 (HD-Oe-l has 2 outputs)
connector bNc
impedance 75 ohm
return loss >15db @ 1485MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity 2 (1) non inverting, 2 (1) inverting
StaNdaRdS Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310M, DVb-aSi eN50083-9
Hd-OE / Hd-OE-L
Optical receiver
OpticalInput
2 x HD-SDIOutput19.4-1485MbpsDistribution
Amplifier
2 x HD-SDIOutput19.4-1485Mbps
DistributionAmplifier
Reclocker
Optical receiver
OpticalInput
2 x HD-SDIOutput19.4-1485Mbps
Distribution Amplifier
Reclocker
dual Hd-SdI Optical to Electrical Converter
•High-densitypackagingintheultracompact2RUframe•Highsensitivityreceiver•DVB-ASIcompatible• Built-incrossoverallowingwavelengthswapand emergency switching• 2OutputDistributionAmplifier•MultiformatRe-clocking• Re-clockerbypassfornon-videoformats•Multimodeversionavailable
OPtICaL INPutData rate optical 19.4 to 1485Mbps
SenSitiVityHD-SDi (1485Mbps) better than –20dbm HD-Oe-l-2 better than –23dbm SDi (270Mbps) better than –25dbm
Detector overload threshold min. -6dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Single mode 9/125um
connector return loss >40db w/SM fiber
Detector damage threshold >+1dbm
connector Sc/uPc
gENERaLPower +5V Dc / 3.2W Max.
control control system for access to setup and module status with biTe (built-in Test equipment)
ELECtRICaL OutPutNumber of outputs 2 per converter
connector bNc
impedance 75 ohm
return loss >15db @ 1485MHz
Jitter max 0.2ui
Peak to peak signal level 0.8V ± 0.1V
Signal polarity 1 non inverting
StaNdaRdS Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310M, DVb-aSi eN50083-9
Hd-OE-2 / Hd-OE-L-2
OpticalInput 1
Bypass 177M/ASI
Reclocker
Bypass 177M/ASI
Reclocker
Microcontroller RemoteControl
Optical receiver
OpticalInput 2
Optical receiver
#2 x 2
1 x ASI /2 x SD / HDOutput 119.4-1485Mbps
1 x ASI /2 x SD / HDOutput 219.4-1485Mbps
HD-Oe-l:
network-electronics.com | 145
Optical converters 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
aES Electrical to Optical Converter
• TransportAESseparately• 1310,1550nmandCWDMversions• ElectricaloutputforuseinDWDMsystems
INPutSSignal format aeS-3 (aeS/ebu)
impedance 110 ohm (transformer balanced)
connector Db25 female (Tascam pin layout)
gENERaLPower +5V Dc / 1.5W
control rS-422 with protocol for use with gYDa-Sc System controller
control system has access to set-up and module status with biTe (built-in Test equipment)
OPtICaL OutPut Transmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Optical wavelength for cWDM See page 153
Optical power for cWDM modules 0dbm
Maximum reflected power 4%
connector Sc/uPc, return loss better than 40db
aES-EO-13t/15t
Slicing & Filtering
AESInput
OpticalOutput
Optical Transmitter
aES Optical to Electrical Converter
• TransportAESseparately•Multimodeorsinglemode• 1200-1620nminput
OutPutSignal format aeS-3 (aeS/ebu)
impedance 110 ohm (transformer balanced)
Jitter < 20ns
connector Db25 female (Tascam pin layout)
gENERaLPower +5V Dc / 1.4W
control rS-422 with protocol for use with gYDa-Sc System controller
control system has access to set-up and module status with biTe (built-in Test equipment)
OPtICaL INPutSensitivity better than –30dbm
Max. input power -3dbm
Optical wavelengths 1200-1620nm
Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible
connector Sc/uPc, return loss better than 40db
aES-OE
Limiter
OpticalInput
AESOutput
Output Buffer
Optical Receiver
146 | network-electronics.com
Time Division Multiplexers
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
SdI time division multiplexer
• 4-ChannelSDI/DVB-ASItimedivisionmultiplexer• ComplieswithSMPTE346M-2000standardforTDMof
video, audio, data over HD•Uninterruptedsignaltransportbylossofanyinputfeedat
transmitter (MuX)•Highperformanceopticsforshortandlonghaul
applications with cWDM laser option
ELECtRICaL INPutNumber of inputs 4 independent SD-SDi or DVb-aSi
Data rate 270Mbps
equalization automatic up to 225m typ.
impedance 75 ohm
return loss >15db @ 270MHz
connector bNc
OPtICaL OutPutOutput signal HD-SDi with TDM payload acc. to SMPTe
346M-2000
Transmission circuit fiber Single mode 9/125um
light source F-P / DFb laser
Optical power –7.5dbm @ 1310nm (F-P laser), 0 dbm (DFb laser)
Optical centre wavelength 1310nm, 1550nm, cWDM acc. to iTu-T g.694.2
Max. wavelength drift ±20nm (F-P lasers), ±6nm (DFb lasers)
Jitter (ui = unit interval) Max. 0.2ui @ 1485Mbps
connector return loss better than 40db w/ SM fiber
connector Sc/uPc
ELECtRICaL OutPutOutput signal HD-SDi with TDM payload acc. to SMPTe
346M-2000
Data rate 1485 Mbps
impedance 75 ohm
return loss >15db @ 1485MHz
Jitter (ui = unit interval) Max. 0.2ui
Peak to peak signal level 0.8V ±0.1V
Signal polarity Non-inverting
connector bNc
gENERaLTemperature range 0 to +45 °c
Power consumption +5V/3.5 W, +15V/1.0W
control rS-422, gYDa-Sc enabled, SNMP
StaNdaRdSSupported standards for electrical and optical ports: SMPTe: SMPTe 346M-2000, SMPTe 292M, SMPTe 259M, SMPTe 305.2M, SMPTe 297M, SMPTe rP165 DVb-aSi: eN50083-9
SdI-td-muX-4
SDI/ASI270Mbps
OpticalOutput
ElectricalOutput
RemoteControl
Optical Transmitter
Equaliser
Reclocker
SDI/ASI270Mbps
Equaliser
Reclocker
SDI/ASI270Mbps
Equaliser
Reclocker
SDI/ASI270Mbps
Equaliser
Reclocker
Micro-controller
EDHHandling
4x4switch
1.485 GbpsHD-SDIoutputs
TDM-MUXSMPTE 346M-2000
SdI time division de-multiplexer
• 4-ChannelSDI/DVB-ASItimedivisiondemultiplexer• TransparenttoAESaudioordatasignalsinthevertical
ancillary data space• Built-inroutingswitcherprovideschannelswappingcapability•GYDA-SCenabledforremotecontrol•Multimodeavailable
ELECtRICaL INPutOutput signal HD-SDi with TDM payload according to
SMPTe 346M-2000
Data rate 1485 Mbps
equalization automatic up to 100m
impedance 75 ohm
return loss >15db @ 270MHz
Signal level Nom. 800mV
connector bNc
OPtICaL INPutinput signal HD-SDi with TDM payload according to
SMPTe 346M-2000
Sensitivity better than -25dbm
Detector overload threshold Min. -6dbm
Detector damage threshold > +1dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Single mode 9/125um Multi mode 50/125um (option)
connector return loss better than 40db w/ SM fiber
connector Sc/uPc
ELECtRICaL OutPutNumber of outputs 4 independent SD-SDi or DVb-aSi
Data rate 270Mbps
impedance 75 ohm
return loss >15db @ 270MHz
Jitter (ui = unit interval) Max. 0.2ui
Peak to peak signal level 0.8V ±0.1V
Signal polarity Non-inverting
connector bNc
gENERaLTemperature range 0 to +45 °c
Power consumption +5V/3.5 W, +15V /1.8W
control rS-422, gYDa-Sc enabled, SNMP
StaNdaRdSSupported standards for electrical and optical ports: SMPTe: SMPTe 346M-2000, SMPTe 292M, SMPTe 259M, SMPTe 305.2M, SMPTe 297M, SMPTe rP165 DVb-aSi: eN50083-9
SdI-td-dmuX-4
SDI/ASI270Mbps
1.485 GbpsOptical Input
1.485 GbpsElectrical Input
RemoteControl
ReclockerSign.
generator
SDI/ASI270MbpsReclocker
Sign.generator
SDI/ASI270MbpsReclocker
Sign.generator
SDI/ASI270MbpsReclocker
Sign.generator
Optical Receiver
Micro-controller
EDHHandling
4x4switch
1.485 GbpsHD-SDIinput
TDM-DMUXSMPTE 346M-2000
2x1Change-over
2x1switch
2x1switch
2x1switch
2x1switch
network-electronics.com | 147
rF over Fiber Modules 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
L-band Electrical to Optical Converter
• Frequencyrange950–2150MHz• Remotelycontrolleddigitalgainandmanualgaincontrol
with gYDa-Sc system controller• Protocoltransparentbroadbandtransmission• F-typecoaxialconnector•Highperformanceopticsforshortandlonghaul
applications with cWDM laser option•Opticallinkbudgetupto25dB•GYDA-SCenabledforremotecontrol,statusmonitoring,
error reporting and SNMP support
RF CHaRaCtERIStICSFrequency band width 950-2150 MHz
return loss >10db
connector F-type
gain flatness ±1.5db over entire band ±0.25db at any 36 MHz
Maximum usable input signal < -5dbm
Maximum input signal without damage >+10dbm
inter modulation products < -55dbc with two carriers –20dbm input signal, 5db Fiber loss
link gain 40db
1db compression (output) 0dbm
Noise figure <10db
cNr >45db with maximum input power @ 36MHz
SFDr (typically -25dbm) >109dbc/Hz
OPtICaL CHaRaCtERIStICSWavelength 1310nm ± 10nm, 10 cWDM
channels ± 2nm 1290, 1310, 1330, 1350, 1470, 1490, 1510, 1530, 1550 and 1570nm
Transmission circuit fiber 9/125um single mode
connector Sc/Pc
Power output -3dbm, 0dbm, +3dbm
Other general standards for compliance with all products:
eMc eN 55103-1, 55103-2
gENERaLPower +5V Dc/3W, –15V Dc/1.5W,
+15V Dc/1.5W
ENvIRONmENtaL CONdItIONSOperation temp. range 0°c – 45°c
Operation without damage temperature range –10°c – 55°c
LB-EO
step attenuator
OpticalOutput
RemoteControl
L-band
LNBpowersupply
MonitorOutput
Micro-controller
Optical Transmitter
LNBcontrol
L-band Optical to Electrical Converter
• Frequencyrange950–2150MHz• Remotelycontrolleddigitalgainandmanualgaincontrol
with gYDa-Sc system controller• Protocoltransparentbroadbandtransmission• F-typecoaxialconnector•Highperformanceopticsforshortandlonghaul
applications with cWDM laser option•Opticallinkbudgetupto25dB•GYDA-SCenabledforremotecontrol,statusmonitoring,
error reporting and SNMP support
RF CHaRaCtERIStICSFrequency band width 950-2150 MHz
return loss >10db
connector F-type
gain flatness ±1.5db over entire band ±0.25db at any 36 MHz
Maximum output signal < -5dbm
inter modulation products < -55dbc with two carriers –20dbm input signal, 5db Fiber loss
link gain 40db
1db compression (output) 0dbm
NF (5db optical loss) <15db
cNr >45db with maximum input power @ 36MHz
SFDr (typically -25dbm) >109dbc/Hz
OPtICaL CHaRaCtERIStICSWavelength 1270-1610nm
Transmission circuit fiber 9/125um single mode
connector Sc/Pc
Maximum input power -6dbm
Other general standards for compliance with all products:
eMc eN 55103-1, 55103-2
environmental roHS, Weee
lNb control 22kHz compatible
gENRERaLPower +5V Dc/3W, –15V Dc/1.5W,
+15V Dc/1.5W
ENvIRONmENtaL CONdItIONSOperation temp. range 0°c – 45°c
Operation without damage temperature range –10°c – 55°c
LB-OE
step attenuator
ElectricalOutput950-2150MHz
RemoteControl
Optical ReceiverOptical
Input950-2150
MHz
MonitorOutput
LNBcontrol
Micro-controller
148 | network-electronics.com
Datacom interfaces
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Fast Ethernet Converter
• 1310,1550nmandCWDMlasers• ElectricaloutputforuseinDWDMsystems• Twoelectricalinputs•Onboardswitch• Sensitivitybetterthan–32dBm
OPtICaL INPutSensitivity better than –32dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible
connector return loss better than 40db
Detector damage threshold >+1dbm
Max input power 0dbm
connector Sc/uPc
OPtICaL OutPutTransmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Optical wavelength for cWDM See page 153
Optical power for cWDM modules 0dbm
connector return loss better than 40db typ.
Max.reflected power 4%
connector Sc/uPc
EtHERNEt2 x 10baseT/100baseTx on rJ-45 connectors, compliant with ieee 802.3 and ieee 802.3u, speed auto sensing, auto MDi/MDi-X. also available with DWDM laser
gENERaLPower +5V Dc/4W and –15VDc/0.1W
control control system for access to setup and module status with biTe (built-in Test equipment)
EtH100
Optical Transmitter2 X10/100 MbpsTwisted PairEthernet
OpticalOutput
ElectricalOutput to DWDM Module
OpticalInput
Optical Receiver
EthernetSwitchw/1MbPacketBuffer
gigabit Ethernet media Converter
• 10BaseT/100BaseTx/1000BaseTautosensing,compliantwith ieee 802.3 and ieee 802.3u, auto MDi/MDi-X
• 1310nm,1550nm,CWDMlasers• ReceiversensitivityBetterthan-25dBm•CardedgeLEDsandGYDA-SCenabled• Lowpower(2W)•Multimodeversionavailable
OPtICaL INPutSensitivity better than –25dbm
Optical wavelength 1200–1620nm
Transmission circuit fiber Single mode 9/125um
connector return loss better than 40db
Detector damage threshold >+1dbm
Max input power –6dbm
connector Sc/uPc
OPtICaL OutPutTransmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Optical wavelength for cWDM See page 153
Optical power for cWDM modules 0dbm
connector return loss better than 40db typ.
Max.reflected power 4%
connector Sc/uPc
EtHERNEt10baseT/100baseTx/1000baseT on rJ-45 connectors, compliant with ieee 802.3 and ieee 802.3u, speed auto sensing, auto MDi/MDi-X
gENERaLPower +5V Dc / 2W
control control system for access to setup and module status with biTe (built-in Test equipment)
EtH1000
Optical Transmitter
10/100/1000 MbpsTwisted PairEthernet
OpticalOutput
OpticalInput
Optical Receiver
Physicalinterfaceethernet
Microcontroller RemoteControl
network-electronics.com | 149
rS-422 and gPi 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
RS-422 data transceiver
• Bi-directionalRS-422toopticalconverter• TransportsfromDCupto115.2kbps• Lowlatency• 1310nm,1550nmandCWDM• ElectricaloutputforuseinDWDMsystem
data INPutS aNd OutPutSSignal format rS-422
connector rJ-45
bit rate Dc up to 115.2kbps
latency 400ns maximum single direction latency including 1m of fiber. additional latency 5us/km of fiber.
gENERaLPower +5V Dc /2.4W
control rS-422 with protocol for use with gYDa-Sc System controller. control system has accessto set-up and module status with biTe (built-in Test equipment)
OPtICaL INPutSensitivity better than –30dbm
Max. input power –3dbm
Optical wavelengths 1200-1620nm
Transmission circuit fiber Multi mode 50/125um,
Single mode 9/125um compatible
connector Sc/uPc, return loss better than 40db
OPtICaL OutPut Transmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Optical wavelength for cWDM See page 153
Optical power for cWDM modules 0dbm
Jitter (ui=unit interval) 0.135 ui max.
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc
d-422
Optical Transmitter
RS422OpticalOutput
ElectricalOutput to optionalDWDM Module
OpticalInput
Optical Receiver
CODEC
RS-422 data transceiverwith gPI multiplexer
• 8xRS-422bi-directionaldatastreams• 16xGPIineachdirection• Verylowlatency•CWDMlasertypeisoptional• ElectricaloutputforuseinDWDMsystem
data INPutS aNd OutPutSSignal format 8 x rS-422
connector 4 x rJ-45
Signal format 16 x gPi / 16 x gPO
connector Db 25
bit rate Dc up to 115.2kbps
latency 400ns maximum single direction latency including 1m of fiber. additional latency 5us/km of fiber
gENERaLVoltage +5V Dc
control rS-422/4W with protocol for use with gYDa-Sc System controller. control system has access to set-up and module status with biTe (built-in Test equipment)
OPtICaL INPutSensitivity better than –30dbm
Max. input power -3dbm
Optical wavelengths 1200-1620nm
Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible
connector Sc/uPc, return loss better than 40db
OPtICaL OutPut Transmission circuit fiber Single mode 9/125um
light source F-P/DFb laser
Optical wavelength (ver. 13T) 1310nm ± 40nm
Optical power -7.5dbm
Optical power (option) 0dbm
Optical wavelength (ver. 15T) 1550nm ± 40nm
Optical power (option) 0dbm
Optical wavelength for cWDM See page 153
Optical power for cWDM modules 0dbm
Jitter (ui=unit interval) 0.135 ui max.
connector return loss better than 40db typ.
Maximum reflected power 4%
connector Sc/uPc
d-422-mg
Optical Transmitter
RS422(1)
RS422(8)
OpticalOutput
ElectricalOutput to optionalDWDM Module
OpticalInput
Optical Receiver
MultiplexerGPO(1)
GPO(16)
GPI(1)
GPI(16)
Occupies two slots
150 | network-electronics.com
automatic Protection Switching and Optical Distribution
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Wideband Optical Coupler
1x4 Wideband Optical Coupler
• Passiveopticalsplittermodule• 50/50or90/10splitratio• Formultipledistributionandlineartappedfiberbusses•Directivitybetterthan55dB
The WOc-4-25 is an all-optical Wideband Optical coupler suitable for signal distribution to up to 4 sites at the same time.
OPtICaLOptical wavelength 2nd and 3rd opt. window (1310nm and
1550nm)
Optical bandpass 1270-1350nm and 1510-1590nm
connector return loss >40db w/SM fiber
Directivity >55db
Transmission circuit fiber Single mode 9/125 um
connector Sc/uPc
Split ratios and insertion loss ratios incl. connector losses:WOc-2-50-50 50%/50% 4.3db/4.3db
WOc-2-90-10 90%/10% 1.4db/11.7db
gENERaL
Power None
control None
OPtICaLOptical passband 1260-1620nm
Split ratio 25%/25%/25%/25%
insertion loss with connectors Max 9db over passband Max 7.5db at 1310nm +/- 20nm and 1550nm +/- 20nm
Transmission circuit fiber Single mode 9/125 um
connector Sc/uPc
return loss >40db typ w/SM fiber
Directivity >55db typ
gENERaL
Power None
control None
WOC-2-X-X
WOC-4-25
CommonOpticalFiber
OpticalFiber 1
X% of λ
(100 – X)% of λ OpticalFiber 2
Combiner/
Splitter
CommonOpticalFiber
OpticalFiber 1
25% of λ
OpticalFiber 2
25% of λ
OpticalFiber 3
25% of λ
OpticalFiber 4
25% of λ
Combiner/
Splitter
network-electronics.com | 151
Optical switching and Wavelength Division Multiplexing 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2x2 Wideband Optical Switch
•Opticalredundancyswitch•ContolledviaGPIalarminput,RS-422or gYDa-Sc control System• Tallyoutput• Latchingandnon-latchingversionavailable
OPtICaLOptical wavelength 1290-1620nm
insertion loss 1.4dbtyp, max 2.1db
connector return loss >40db w/SM fiber
cross talk <-80db
repeatability +/- 0.01db
Durability 10 000 000 cycles
Switching time 50ms typ.
Transmission circuit fiber Single mode 9/125 um
connector Sc/uPc
gENERaLPower +5V Dc/ 1W
control control system for access to setup and module status with biTe (built-in Test equipment)
WOS-2X2
OpticalFiber 1
OpticalFiber 2
CommonOpticalFiber 1
CommonOpticalFiber 2
Power
Power
Power
Power
SPDT
Input 1
Input 2
Output 1
Output 2
Input 1
Input 2
Output 1
Output 2
2x2 SwitchMain Position
2x2 SwitchStandby Position
Wavelength division multiplexer
• Twochannelsperfiber• Bi-directionaltrafficonthesamefiber•Canbeusedasmultiplexerandde-multiplexer•High-isolationavailableonrequest
OPtICaLOptical wavelength 2nd and 3rd opt. window (1310nm or
1550nm)
Optical bandpass 1280-1335nm and 1525-1575nm
insertion loss < 2db
isolation > 17db
Directivity > 50db
Transmission circuit fiber Single mode 9/125 um
connector return loss >40db w/SM fiber
connector Sc/uPc
gENERaLPower None
control None
Wdm-2
1310nm+1550nm
1310nm1 +
1
2
2
1550nm
WDM
Town A
Frame: FR-2RU-10-2
Modules: 1 x WDM-21 x SDI-EO-13T OdBm1 x SDI-EO-15T OdBm
Frame: FR-2RU-10-2
Modules: 1 x WDM-22 x SDI-OE-Sor 2 x SDI-OE-L
Example
Town B
152 | network-electronics.com
Optical Multiplexing
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
by using the all-optical Wavelength Division
Multiplexing (WDM) technique, simultaneous
transport of multiple signals on the same
fiber is possible. a standard 2-channel
WDM solution enables transmission of two
independent signals on the same fiber.
both uni-directional and bi-directional
configurations are possible, as the direction
of any channel can be chosen to suit the
transport needs.
cWDM systems can be built with 8 channels
pr frame (upgradable to 16 ch.), or with 16
channels in one frame (requires dual optical
converters for SD/HD).
Systems incorporating DWDM are based on
the 8+1 architecture that has 8 channels per
frame + 1 upgrade port, thereby enabling
easy and cost efficient upgrade of capacity
on the fiber as the demand grows. Optical
multiplexers are available for systems with a
wavelength count up to 40.
To ensure maximum third party
interoperability, the wavelengths used in both
the cWDM as well as the DWDM systems are
selected according to the standards
iTu-T g.694.1 for DWDM and
iTu-T g.694.2 for cWDM.
Optical multiplexing is format and protocol
independent, so a mixture of different
signals on the different wavelengths is
straightforward. The only thing to bear in
mind is that higher bit rate means a shorter
maximum reach, and the optical budget
should be calculated carefully.
comparison of WDM technologiesFlashlink dense Wdm/Coarse Wdm dWdm (100gHz) CWdm
Max number of channels 40 16
Standard iTu-T g.694.1 iTu-T g.694.2
channel spacing 0.8nm 20nm
laser wavelength variation (0-40°c) ±0.16nm ±6.5nm
Optical amplification Yes, eDFa No
WDM channel Overview
Wavelength (nm)
Fiber
Atte
nuat
ion
1250 1300 1350 1400 1450 1500 1550 1600 1650
1310 1550
O-band E-band S-band C-band L-band U-band
2 chWDM
16 chCWDM
C-band
1530 1565
40 chDWDM
14701270 1550 1610
SMF
SMF – Single mode fiber, ITU-T G.652 A and BLWPF – Low water peak single mode fiber, ITU-T G.652 C and D
LWPF
network-electronics.com | 153
Optical Multiplexing 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Flashlink CWdm 1–8 and 9–16
Wavelength availability chart
acc. to iTu-T g.694.2
Wavelength [nm] Wavelength [nm]
channel 1–8 channel 9–16
1470 1270
1490 1290
1510 1310
1530 1330
1550 1350
1570 1370
1590 1390
1610 1410
Flashlink dWdm Wavelength availability Chart
acc. to Itu-t g.694.1
channel (#) center frequency (THz)
Wavelength (nm)
20 192.0 1561.41
21 192.1 1560.61
22 192.2 1559.79
23 192.3 1558.98
24 192.4 1558.17
25 192.5 1557.36
26 192.6 1556.55
27 192.7 1555.75
28 192.8 1554.94
29 192.9 1554.13
30 193.0 1553.33
31 193.1 1552.52
32 193.2 1551.72
33 193.3 1550.92
34 193.4 1550.12
35 193.5 1549.32
36 193.6 1548.51
37 193.7 1547.72
38 193.8 1546.92
39 193.9 1546.12
40 194.0 1545.32
41 194.1 1544.53
42 194.2 1543.73
43 194.3 1542.94
44 194.4 1542.14
45 194.5 1541.35
46 194.6 1540.56
47 194.7 1539.77
48 194.8 1538.98
49 194.9 1538.19
50 195.0 1537.40
51 195.1 1536.61
52 195.2 1535.82
53 195.3 1535.04
54 195.4 1534.25
55 195.5 1533.47
56 195.6 1532.68
57 195.7 1531.90
58 195.8 1531.12
59 195.9 1530.33
154 | network-electronics.com
Optical Multiplexing
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
CWdm System
SPECIFICatIONSOperation temperature 0–40°c
Wavelengths See page 153
Transmission circuit fiber Single mode 9/125 um
connector return loss better than 30db typ.
Max. reflected power 4%
connector common port Sc/uPc acc. to SMPTe-297M
connector common port (optional) Fc/Pc
OPtICaL FILtERINg, CHaNNELS 1-8 aNd 9-16
insertion loss any ch. (1-8) 5db max total for both ends (low loss: 4db)
insertion loss any ch. (9-16) 7db max total for both ends (low loss: 6db)
insertion loss per upgrade port 2.0db max
Tx-Tx directivity -55db
isolation adjacent ch. -25db
isolation any other ch. -35db
CWdm1–8 / CWdm9–16
The cWDM system is based on 8-channel optical filters. 1 upgrade
port for easy addition of more channels at a later stage. The
wavelengths are chosen according to the iTu-T g.694.2 standard in
order to ensure maximum interoperability.
The wavelengths of the signal cards must correspond to the
wavelengths of the optical filters, whereas the signal formats
running on those wavelengths can be chosen to suit the signal
transport needs.
CWDMchannel
9-16
CWDMchannel
1-8
Ch.9...
Ch.16
Ch.1...
Ch.8
Ch.9...
Ch.16
Ch.1...
Ch.8
16 independentchannels
optical fiber
CWDMchannel
9-16
CWDMchannel
1-8
CWDM
14701270 1550 161014701270 1550 1610
8 independentchannels
optical fiber
16 independentchannels
optical fiber
also available in low-loss version(cWDM1–8l and cWDM9–16-l)
network-electronics.com | 155
Optical Multiplexing 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
8-channel dWdm filter with upgrade port
OPtICaL SPECIFICatIONSNumber of channels up to 40
available wavelengths See channel plan
connector Sc/uPc
insertion loss (one matched pair,
including connectors) 4.5db max
insertion loss (common to upgrade) 0.8db max
channel Spacing 100gHz
Passband +/- 15.0gHz
adjacent channel isolation 25db min
Non-adjacent channel isolation 40db min
Directivity 45db min
return loss 45db min
PDl 0.25db max
Operating Temperature 0 – 55 Oc
Storage Temperature -40 – 85 Oc
Optical Power 300mW max
dWdm-8C
• TheonlymodularDWDMsysteminthebroadcastmarketthatallowsthecustomer to grow to 40 DWDM channels, other system have a limit of 16 channels
• SameformfactorasCWDMallowsforincreasedframedensityofDWDMcards
• Initscategorythemostuptodatespecificationonthemarket• Passivedevice• Loweredinitialinvestmentcostyetstillprovidestheflexibilitytogrowin
the future
channel plan(product suffix)
channel (#) center frequency (THz)
Wavelength (nm)
1
20 192.0 1561.41
21 192.1 1560.61
22 192.2 1559.79
23 192.3 1558.98
24 192.4 1558.17
25 192.5 1557.36
26 192.6 1556.55
27 192.7 1555.75
2
28 192.8 1554.94
29 192.9 1554.13
30 193.0 1553.33
31 193.1 1552.52
32 193.2 1551.72
33 193.3 1550.92
34 193.4 1550.12
35 193.5 1549.32
3
36 193.6 1548.51
37 193.7 1547.72
38 193.8 1546.92
39 193.9 1546.12
40 194.0 1545.32
41 194.1 1544.53
42 194.2 1543.73
43 194.3 1542.94
4
44 194.4 1542.14
45 194.5 1541.35
46 194.6 1540.56
47 194.7 1539.77
48 194.8 1538.98
49 194.9 1538.19
50 195.0 1537.40
51 195.1 1536.61
5
52 195.2 1535.82
53 195.3 1535.04
54 195.4 1534.25
55 195.5 1533.47
56 195.6 1532.68
57 195.7 1531.90
58 195.8 1531.12
59 195.9 1530.33
Ch. 52...
Ch. 59
40 independentchannels
40 independent
optical fiber
optical fiber
Ch. 44...
Ch. 51
Ch. 36...
Ch. 43
Ch. 28...
Ch. 35
Ch. 20...
Ch. 27
Ch. 52...
Ch. 59
Ch. 44...
Ch. 51
Ch. 36...
Ch. 43
Ch. 28...
Ch. 35
Ch. 20...
Ch. 27
DWDM8C-1A
DWDM8C-2A
DWDM8C-3A
DWDM8C-4A
DWDM8C-5A
DWDM8C-1B
DWDM8C-2B
DWDM8C-3B
DWDM8C-4B
DWDM8C-5B
40 independentchannels
DWDM-8C
1A
DWDM-8C
5B
DWDM-8C
2A
DWDM-8C
4B
DWDM-8C
3A
DWDM-8C
3B
DWDM-8C
4A
DWDM-8C
2B
DWDM-8C
5A
DWDM-8C
1B
optical fiber
Wavelength (nm)
Fiber
Atte
nuat
ion
1250 1300 1350 1400 1450 1500 1550 1600 1650
1310 1550
O-band E-band S-band C-band L-band U-band
2 chWDM
16 chCWDM
C-band
1530 1565
40 chDWDM
14701270 1550 1610
SMF
SMF – Single mode fiber, ITU-T G.652 A and BLWPF – Low water peak single mode fiber, ITU-T G.652 C and D
LWPF
156 | network-electronics.com
40-channel dWdm multiplexer and de-multiplexer
Dimensions 483x88x178mm (19”, 2ru)
channel spacing 100gHz within the c-band
Wavelengths according to iTu-T g.694.1
Passband iTu +/- 12gHz
insertion loss paired mux/demux 6db max
Pair uniformity on pairs shipped together 1.5db typ
adjacent ch. isolation 25db
Non-adjacent ch. isolation 40db min
Directivity 45db min
connector Sc/uPc
connector return loss better than 40db
Polarisation Dependent loss 0.25 db max
Max power 300mW
Transmission circuit fiber Single mode 9/125 um
uniform loss version for multi-stage eDFa application available on request.
dWdm-40C
C-band
1530 1565
40 chDWDM
E/O
E/O
E/O
E/O
Dig
ital S
igna
l In
Dig
ital S
igna
l Out40 independent
channels
optical fiber
E/O
E/O
E/O
E/O
Ch.1Ch.2Ch.3Ch.4
Ch.5Ch.6Ch.7Ch.8
Ch.9Ch.10Ch.11Ch.12
Ch.13Ch.14Ch.15Ch.16
Ch.17Ch.18Ch.19Ch.20
Ch.21Ch.22Ch.23Ch.24
Ch.25Ch.26Ch.27Ch.28
Ch.29Ch.30Ch.31Ch.32
Ch.1Ch.2Ch.3Ch.4
Ch.5Ch.6Ch.7Ch.8
Ch.9Ch.10Ch.11Ch.12
Ch.13Ch.14Ch.15Ch.16
Ch.17Ch.18Ch.19Ch.20
Ch.21Ch.22Ch.23Ch.24
Ch.25Ch.26Ch.27Ch.28
Ch.29Ch.30Ch.31Ch.32
E/O
Ch.33Ch.34Ch.35Ch.36
E/O
Ch.37Ch.38Ch.39Ch.40
O/E
O/E
O/E
O/E
O/E
O/E
O/E
O/E
Ch.33Ch.34Ch.35Ch.36
O/E
Ch.37Ch.38Ch.39Ch.40
O/E
FlashlinkDWDM40 ch.DMUXframe
FlashlinkDWDM40 ch.MUXframe
Optical Multiplexing
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
Flashlink dWdm Wavelength availability Chart acc.
to Itu-t g.694.1
•C-band100GHzchannelspacingaccordingtoITU-TG.694.1–ensuresinteroperability with other standards-based DWDM systems
• Flatspectrum–theDWDM-40Cisidealforuni-directionalusewitherbium Doped Fiber amplifiers (eDFas)
• Thisall-opticaldevicefitsinastandardFlashlinkframe–nomaintenanceneeded, no power needed
• Signalscanbeuni-orbi-directional–supportsdigitalvideoandGigabitethernet running on different wavelengths
• Signalandbit-ratetransparent–SDI,HD-SDI,GigabitEthernetandSDH/SONeT run independently on separate wavelengths
The flagship of the optical transport platform is the 40-channel DWDM-system, allowing for up to 40 signals on a single strand of optical fiber. based on the standardised iTu-T g.694.1 channel spacing grid of 100gHz within the c-band, the 40-channel DWDM system has the same flexibility in signal formats and bit-rates as the 16-channel system using a channel spacing grid of 200gHz.
The optical filtering is placed in a separate 2ru-frame doing all the filtering needed to multiplex or demultiplex the channels involved. The filtering is always sold as a corresponding pair of two frames, one for each end of the fiber. This is due to the fact that the filters are designed as a pair in order to optimise the optical characteristics of the filters and minimise insertion loss.
The direction of any channel can be reversed so the system allows for maximum flexibility while designing your optical networks.
Please contact your local Network electronics’ sales representative to design the best solution for your needs.
channel (#) center frequency (THz)
Wavelength (nm)
20 192.0 1561.41
21 192.1 1560.61
22 192.2 1559.79
23 192.3 1558.98
24 192.4 1558.17
25 192.5 1557.36
26 192.6 1556.55
27 192.7 1555.75
28 192.8 1554.94
29 192.9 1554.13
30 193.0 1553.33
31 193.1 1552.52
32 193.2 1551.72
33 193.3 1550.92
34 193.4 1550.12
35 193.5 1549.32
36 193.6 1548.51
37 193.7 1547.72
38 193.8 1546.92
39 193.9 1546.12
40 194.0 1545.32
41 194.1 1544.53
42 194.2 1543.73
43 194.3 1542.94
44 194.4 1542.14
45 194.5 1541.35
46 194.6 1540.56
47 194.7 1539.77
48 194.8 1538.98
49 194.9 1538.19
50 195.0 1537.40
51 195.1 1536.61
52 195.2 1535.82
53 195.3 1535.04
54 195.4 1534.25
55 195.5 1533.47
56 195.6 1532.68
57 195.7 1531.90
58 195.8 1531.12
59 195.9 1530.33
network-electronics.com | 157
eDFa 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Erbium doped fiber amplifier – multichannel long-haul optical amplification
Dimensions 3 Flashlink slots
input range 1529-1562nm
Total optical input power -10dbm min, typ -6dbm
Total optical output power +17dbm, +/- 1.5dbm
gain flatness @23db gain 1.0db
Noise figure 6.0db max over full band
Polarisation dependent gain 0.5db max
Polarisation mode dispersion 0.5ps max
connector Sc/uPc
input/output return loss better than 35db
Power consumption +5V/9W max
Transmission circuit fiber Single mode 9/125 um
EdFa-B-C 17dBm
The Flashlink eDFa family introduced at Nab 2007 will enable broadcasters to maximize their investment in a DWDM infrastructure by providing multichannel, all-optical amplification. The eDFa family consists of a booster/in-line amplifier and a low noise pre-amplifier.
The full-band eDFa boosts up to 40 DWDM-channels enabling the distance covered by fiber backhaul to be maximized and allowing broadcasters to upgrade their signal distribution from SD to HD over DWDM without needing to invest in infrastructure upgrades such as optical-to-electrical-to-optical in-line signal regeneration.
Such gains are even more impressive when eDFa technology is deployed in conjunction with the newly launching DWDM-40c.
Network electronics’ eDFa solution is extremely compact and extends the reach of the local network to remote locations, increasing functionality and lowering total cost of ownership. in addition, service providers offering traditional broadcast services over SDH/SONeT can now deploy Flashlink eDFas to increase the profitability and reach of their current infrastructure.
EDFA EDFA
• Full-bandEDFAcoversall40C-bandDWDMchannels(1528-1562nm)• Flatgainoverwholespectrum,Idealformultistageandfull-band
amplification• SDIOptimised,fullbroadcastperformance–transportspathologicalSDIand
HD-SDi signals without scrabling• Booster/in-lineandpre-ampversions• TheonlymodularEDFAavailable,Boosterandpre-amportwoin-lineEDFAs
in the same frame• Verycompact–occupies3slotsinaFlashlinkFR-2RU-10-2frame• Verylowpowerconsumption,only9W• ExtensiveparametermonitoringwithNetworkElectronicsGYDA-SC
controller• Enablespoint-to-pointtransportofupto40uncompressedHD-SDIsignalsat
long distances without electrical regeneration•Uni-directionaldevice• Signalandbit-ratetransparent
158 | network-electronics.com
iP gateways
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
SdI tO IP gatEWay
• SDIoverGigabitEthernet/IP• IPprotocolinaccordancewithPro-MPEGCoP4• VariousForwardErrorCorrectionmodes,highQoS• Built-inframesynchronizerwithadvancedjittersuppression• TransparenttoembeddedAESaudioorotherancillarydata•Configurableastransmitterorreceiver• SeparatedmanagementEthernetportwithin-bandmanagementoption• UserfriendlyWEB/XMLbasedremotecontrol• EasyintegrationtoNMSsystemswithSNMPsupport
vIdEO INtERFaCESinput SDi (SMPTe 259M) /
SDTi (SMPTe 305M)
Output 2 x SDi (SMPTe 259M)
connector Female bNc
bitrate 270Mbps
SDi clock Options locked to input Signal genlock to external SDi input
NEtWORk INtERFaCESType 100/1000base-T ethernet
Protocols ieee802.3 ethernet rTP, arP, iPv4, igMPv2/3, TcP/uDP
connector rJ45 SFP Module
FEatuRESVideo encapsulation Pro-MPeg Forum cOP-4
Forward error correction: Pro-MPeg Forum cOP-4
CONtROL aNd maNagEmENtType 10/100 base-T
Features element control through HTTP/Web. SNMP traps for integration with Network Management System (NMS)
Protocol HTTP, XMl, SNMP v2
connector rJ45
alarm relay 9 pin D-Sub
Maintenance Port rS-232 9 pin D-Sub
Physical and Power
input Voltage 100-240V ac +/- 10%
input Voltage Option 48V Dc
Dimensions 1ru, ½-width 19’’ (WxDxH) 210x300x44.5mm (Two units in 19’’ 1ru rack space)
installation 19’’ rack mounting kit supplied
ENvIRONmENtaL CONdItIONS Operating Temperature 0°c - +50°c
Storage Temperature -20°c - +70°c
relative Humidity 5% to 95% (non condensing)
COmPLIaNCEce ce marked in accordance with
93/68/eec (22/07/03) Directive
ul Designed for ul approval
Safety iec60950 and eN60950
eMc eN55022, eN55024,eN6100-3-2
SdI-IP-gtW
The world market is going through a major change the way in which video content is moved around. The new way is by using the internet Protocol (iP) over Telco networks, a technology currently deployed on the internet and in corporate networks.
The scalable and cost-effective iP networks offer an inherent flexibility of bandwidth: 10Mbps, 100Mbps, 1gbps and 10 gbps. This technology enables new applications and opportunities, for instance low delay uncompressed video on SDi using 270Mbps, MPeg-2 bandwidths of 1-50 MMbps, MPeg-4 part10 (H.264/aVc)
SDi to iP gateway The award winning iPTV gateway (SDi-iP-gTW) solution allows real time transport of uncompressed SDi digital video via iP over Wide area Networks (WaN) where access to dark fiber or wavelengths is limited. like other products in the Flashlink family, the SDi-iP-gTW provides uncompromising video quality with no signal degradation. an advanced forward error correction mechanism in accordance with Pro-MPeg code-of-Practice #4 guarantees high quality of service.
aPPLICatION aREaS:• Professionalbroadcastcontribution• Videobackhaulsolutions• Liveeventcoverage
SDI IN
IN
ACTIVE
SDI OUT 1 SDI OUT 2
LED YELLOW : SDI INLED GREEN : ACTIVE
TEST
IP NetworkLive Sports
ProductionFacility
NetworkOperations
Center
network-electronics.com | 159
iP gateways 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Video Compression
SD/HD Video
ASI
ASI-IP-GTW
ASI-IP-GTW
ASI
Video Compression
ASI-IP-GTW
GigE
FastE
ASI-IP-GTW
Venue
Master Control / POP
aSI tO IP gatEWay
tRaNSPORt StREam INtERFaCESPorts 4 DVb aSi. Optional 8 DVb aSi
user configurable as inputs or outputs. license for 1,2,3,4 or 8 active ports
connector Female bNc
bitrate Max. 216Mbit/s
NEtWORk INtERFaCES Type 100/1000base-T ethernet
Protocols ieee802.3 ethernet rTP, arP, iPv4, igMPv2/3, TcP/uDP
connector rJ45 SFP Module
tOtaL tRaNSPORt Stream rate Max. 450 Mbps
ethernet MTu length Max. 1500 bytes
StREam PROCESSINg TS encapsulation Pro-MPeg Forum cOP-3.
Forward error correction Pro-MPeg Forum cOP-3
TS Processing Transparent
CONtROL aNd maNagEmENtType 10/100 base-T
Features element control through HTTP/Web. XMl configuration import and export via HTTP. SNMP traps for integration with Network Management System (NMS)
Protocol HTTP, XMl, SNMP v2
connector rJ45
alarm relay 9 pin D-Sub
Maintenance Port rS232 Db9 male
PHySICaL aNd POWERinput Voltage 100-240V ac +/- 10%
input Voltage Option 48V Dc
Dimensions 1ru, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm (Two units in 19’’ 1ru rack space)
installation 19’’ rack mounting kit supplied
ENvIRONmENtaL CONdItIONS Operating Temperature 0°c - +50°c
Storage Temperature -20°c - +70°c
relative Humidity 5% to 95% (non condensing)
COmPLIaNCEce ce marked in accordance with 93/68/eec
(22/07/03) Directive
ul Designed for ul approval
Safety iec60950 and eN60950
eMc eN55022, eN55024,eN6100-3-2
aSI-IP-gtW
The aSi-iP-gTW provides a gateway solution for the transmission of compressed digital video content over iP networks. being a member of the Flashlink product portfolio, the aSi-iP-gTW allows broadcast quality contribution and distribution of DVb aSi over local area, Metropolitan and Wide area Networks.
aSi to iP gateway The unit allows carrying of up to 8 DVb aSi transport streams over a gigabit ethernet connection. Forward error correction in accordance with Pro-MPeg code-of-Practice 3 increases robustness against packet loss and guarantees high quality of service. The aSi-iP-gTW handles transport streams carrying MPeg-2, MPeg-4 (H.264) and Vc.1 standard and high definition compressed video.
aPPLICatION aREaS:• Professionalbroadcastdistribution• Professionalbroadcastcontribution• Liveeventcoverage
SDI IN
IN
ACTIVE
SDI OUT 1 SDI OUT 2
LED YELLOW : SDI INLED GREEN : ACTIVE
TEST
•DVBASIover100Base-Tor1000Base-TEthernet• TransportstreamencapsulationinaccordancewithPro-MPEGCoP-3• FlexibleForwardErrorCorrectioninaccordancewithPro-MPEGCoP-3•Upto8DVB-ASItransportstreamsin½19”1RU•Configurableastransmitterorreceiver• SeparatedmanagementEthernetportwithin-bandmanagementoption•UserfriendlyWEB/XMLbasedremotecontrol• EasyintegrationtoNMSsystemswithSNMPsupport
160 | network-electronics.com
iP gateways
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
2.1
SdI tO IP gatEWay – JPEg2000
•Highqualityvideo• JPEG2000compression• 10bitvideo• Intraframeencoding• RobusttransmissionofSDIsignals• FlexibleForwardErrorCorrection• Errorconcealment• Verylowdelay• Encodinganddecodingdelaylessthan100ms• Ancillarydatasupport• Transparenttransferofembeddedaudioandverticalancillarydata•Compact,cost-effectivesolutions•Completetransmitter/receiverin1RU•Userconfigurableastransmitterorreceiver•User-friendlyconfigurationandcontrol•WEB/XMLbasedremotecontrol• EasyintegrationtoNMSsystemswithSNMPtrapsupport• SoftwareupgradeabletoHD
vIdEO INtERFaCESinput SDi (SMPTe 259M)
Output SDi (SMPTe 259M) 2 main and 1 test outputs
connector Female bNc
SDi clock locked to external SDi input
NEtWORk INtERFaCESType 100/1000base-T ethernet
Protocols ieee802.3 ethernet rTP, arP, iPv4, igMPv2/3, TcP/uDP
connector rJ45 SFP Module (Option)
vIdEO ENCOdINgVideo encoding JPeg2000
iP encapsulation MXF over rTP
iP bitrate 5 to 100 Mbps
Forward error correction Forward error correction based on Pro-MPeg Forum coP-4 Fec
RESOLutIONSEBUTech.3267-E,2ndedition;625lines,50fields/s
SMPTe 125M-1995 525 lines, 59.94 fields/s
audIO aNd aNCILLaRy dataaudio formats embedded audio (SMPTe 272M)
uncompressed, 16 channels, 20 bit
Data formats ancillary data (SMPTe 291M-1998) Transparent
audio/video delay +/- 1 line
CONtROL aNd maNagEmENtType 10/100 base-T ethernet
Features element control through HTTP/Web. XMl SNMP traps for integration with Network Management System (NMS). SNMP control.
Protocol HTTP, XMl, SNMP v2
connector rJ45
alarm relay 9 pin D-Sub
Maintenance Port rS232 9 pin D-Sub
PHySICaL aNd POWERinput Voltage 100-240V ac +/- 10%
input Voltage Option -48V Dc
Dimensions 1ru, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1ru rack space
installation 19’’ rack mounting kit supplied
ENvIRONmENtaL CONdItIONS Operating Temperature 0 °c – +50 °c
Storage Temperature -20 °c – +70 °c
relative Humidity 5% to 95% (non condensing)
COmPLIaNCE ce 73/23/eec (low voltage equipment)
89/336/eec (electromagnetic compatibility)
cSa Designed for cSa approval
Safety iec60950 and eN60950
eMc eN55022, eN55024, eN6100-3-2
SdC-IP-gtW
The SDc-iP-gTW provides JPeg2000 compression of SDi signals, allowing cost-effective transmission of high quality TV signals over ethernet links.
aPPLICatION aREaS:• BroadcastcontributionwithEthernetconnectivity• Studio-to-studiomediaexchange• In-housesignaldistributionandrouting• Post-production• Liveeventcoverage
SDI IN
IN
ACTIVE
SDI OUT 1 SDI OUT 2
LED YELLOW : SDI INLED GREEN : ACTIVE
TEST
network-electronics.com | 161
iP gateways 2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Hd-SdI tO IP gatEWay – JPEg2000
vIdEO INtERFaCESinput HD-SDi (SMPTe 292M)
SD-SDi (SMPTe 259M)
Output HD-SDi (SMPTe 292M) 2 main and 1 test outputs
connector Female bNc
SDi clock locked to external SDi input (SD/HD)
NEtWORk INtERFaCES Type 100/1000base-T ethernet
Protocols ieee802.3 ethernet rTP, arP, iPv4, igMPv2/3, TcP/uDP
connector rJ45 SFP Module (Option)
vIdEO ENCOdINg Video encoding JPeg2000
iP encapsulation MXF over rTP
iP bitrate 25 to 200 Mbps
Forward error correction Forward error correction based on Pro-MPeg Forum coP-4 Fec
Hd RESOLutIONSSMPTe 274M-2003 System 5 1920 x 1080/59.94/iSMPTe 296M-2001 System 2 1280 x 720/59.94SMPTe 274M-2003 System 6 1920 x 1080/50/iSMPTe 296M-2001 System 3 1280 x 720/50SMPTe 274M-2003 System D 1920x1080/24/PsF
audIO aNd aNCILLaRy data audio formats embedded audio (SMPTe 299M-1997)
uncompressed, 16 channels, 20 bit
Data formats ancillary data (SMPTe 291M-1998)
CONtROL aNd maNagEmENt Type 10/100 base-T ethernet
Features element control through HTTP/Web. XMl SNMP traps for integration with Network Management System (NMS). SNMP control.
Protocol HTTP, XMl, SNMP v2
connector rJ45
alarm relay 9 pin D-Sub
Maintenance Port rS232 9 pin D-Sub
PHySICaL aNd POWER input Voltage 100-240V ac +/- 10%
Dimensions 1ru, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1ru rack space
installation 19’’ rack mounting kit supplied
ENvIRONmENtaL CONdItIONS Operating Temperature 0 °c – +50 °c
Storage Temperature -20 °c – +70 °c
relative Humidity 5% to 95% (non condensing)
COmPLIaNCE ce 73/23/eec (low voltage equipment)
89/336/eec (electromagnetic compatibility)
cSa Designed for cSa approval
Safety iec60950 and eN60950
eMc eN55022, eN55024, eN6100-3-2
HdC-IP-gtW-C/-d
The HDc-iP-gTW provides a gateway solution for the transmission of JPeg 2000 compressed HD-SDi content over iP networks. The HDc-iP-gTW is available as a encoder/decoder (codec, -c version) and as a cost effective decoder only version.
The HDc-iP-gTW is a multi rate video gateway and will auto-sense SD or HD bit rates.
aPPLICatION aREaS:• ProfessionalbroadcastcontributionwithEthernetconnectivity• Studio-to-studiomediaexchange• In-housesignaldistributionandrouting• Post-production• Liveeventcoverage
SDI IN
IN
ACTIVE
SDI OUT 1 SDI OUT 2
LED YELLOW : SDI INLED GREEN : ACTIVE
TEST
•HighqualityvideousingJPEG2000compression• RobusttransmissionofHDTVsignals• Verylowdelay• Ancillarydatasupport• Compact,cost-effectivesolutions• User-friendlyconfigurationandcontrol• AutosensingSD/HD• ForwardErrorCorrection•Codecversion(-C)anddecoderonly(-D)version
162 | network-electronics.com
Modules for desktop and stand alone applications have until now
been associated with medium-low to medium-high performance with
little or no reconfiguration possibilities. Well, those days are gone.
INtERCHaNgEaBLE mOduLES– initial cost savings combined with a future proof upgrade path
With Flashlink Micro, Network electronics introduces the industry
standard Flashlink modules fitted in a compact and cost-effective
housing for stand alone applications. as regular Flashlink modules are
used in the Flashlink Micro series it is no longer a trade off between
form factor and module performance, the best of both worlds can
finally be realised with Flashlink Micro.
mINImum SEtuP tImEFlashlink Micro comes with an in-line brick power supply (redundant
power optional, brick or rack-mount) so all you need is to connect
signal- and power cables and the self-contained box is up and
running with full broadcast quality in no time.
mONItORINg aNd CONFIguRatION control features like on board status leD’s and gPi interface as well as
rS-422 interface for gYDa-Sc control is standard on all modules.
re-configuration of the module is easily done with DiP-switches on
the module itself or via the gYDa-Sc system controller for Flashlink.
FLEXIBLE mOuNtINgVarious mounting options are available for increased mounting
flexibility:
• 1RUTrayfor4FlashlinkMicromodules
• Wallmounting
• Ontablemounting
• Underthetablemounting
• Angledwall-,on-table-andunder-the-table-mounting
• StackingofFlashlinkMicromodules
maXImum FuNCtIONaLItyThe comprehensive Flashlink Micro range covers a wide variety of
functions:
• AudioandVideoconversion,processingandsynchronisation
• Distributionamplifiers
• FiberconversionofSDIandHD-SDIsignals
• Embedding/de-embedding
• DatacomInterfaces
• Automaticchangeovermodulesforredundancy
LOW POWER CONSumPtION all Flashlink Micro modules are designed with low power
consumption in mind.
RuggEdIzEd ENCLOSuRE dESIgNThe combination of high reliability design philosophy and the
ruggedized enclosure design, means you can enjoy Flashlink Micro for
many years.
FutuRE PROOF uPgRadE PatHSince the boards and back planes of Flashlink Micro are the same
as in the Flashlink 2ru modular frame holding up to 10 modules,
the roadmap to future system expansion is crystal clear and straight
forward. interchangeable boards means that all modules in Flashlink
Micro automatically are compliant with relevant broadcast standards,
as is the case for the Flashlink 2ru modular system.
in the next few pages you can see for yourself that Flashlink Micro
meets or exceeds your expectations to modules for desktop or stand-
alone applications.
Flashlink Micro
FlaSHliNK MicrO
2.1
Flashlink Micro, your ideal choice for desktop applications– High performance video/audio processing and fiber optics made simple
Distribution amplifiersembedders / De-embeddersVideo convertersaudio convertersSynchronisation Modulesautomatic changeover ModuleseO and Oe convertersDatacom interfaces
One Flashlink card
+ One in-line power supply
+ One N-Box
= Flashlink micro
network-electronics.com | 163
Distribution amplifiers 2.1
FlaSHliNK MicrO
SdI distribution amplifier
• SDI/AES-3idsupport• Automaticbitratedetection•On-boardcableequaliser•Non-videobitratesupport
in: 1 – Out: 8
Fm-da-SdI
analog video multisignal distribution amplifier
•DCto200MHzanalogvideo• 6non-invertingoutputs• AlsosuitableforSDIaccordingtoSMPTE-259M
in: 1 – Out: 6
Fm-da-va
dual digital audio distribution amplifier
•Digitalaudiodistributionamplifier•ConfigurableasDual1x4orSingle1x8• Reportssignalpresence• Supportssampleratefrom15to96kHz• Supportsbitratefrom16kbpsto14Mbps
in: 1 or 2 – Out: 8 or 2x4
Fm-da-aES
dual analog audio distribution amplifier
• Analogaudiodistributionamplifier• Precisiongainsettingsfor-12to+12dB• Allowsmixingof2inputsindual1x4mode• ForbalancedACsignalsfrom3.3Hzto400kHz
in: 2 – Out: 8
Fm-da-aa
SdI distribution amplifier w/monitoring Output
• 8-bitcompositeencoderandDA• 3SDIand3compositeoutputs• Automaticstandardsdetection• EDHmonitoring
in 1Out 3 re-clocked SDi and 3 NTSc/Pal composite
Fm-daC-mON
More details, see page 113
More details, see page 113More details, see page 114
More details, see page 114
More details, see page 115
164 | network-electronics.com
embedders / De-embedders
FlaSHliNK MicrO
2.1
digital audio Embedder
• 4-channel24-bitAES(8monoaudio)audio embedder
• Automaticinsertionofsamplerateconverters• EDHinaccordancewithSMPTE-RP165• Embeddinginacc.withSMPTE-272Mgiving
maximum compatibility to 3rd party products• TransformerbalancedAESin-andoutputs• Allowsexternalsamplingratesfrom16-144kHz w/Src enabled•Canbeusedas4-CHembedder,4-CH
de-embedder or 2-cH de-embedder/embedder • 110ohmbalancedand75ohmunbalalancedversion
available•Optionalwithopticaloutput(AV-MUX-13T)
Fm-av-muX, Fm-av-muX-13t
digital audio de-embedder
• 4-channel24-bitAES(8monoaudio)audio de-embedder• EDHinaccordancewithSMPTE-RP165•De-embeddinginacc.withSMPTE-272Mgiving maximum compatibility to 3rd party products • TransformerbalancedAESoutputs• 110ohmbalancedand75ohmunbalanced version available•Optionalwithopticalinput(AV-DMUX-R)
Fm-av-dmuX, Fm-av-dmuX-R
More details, see page 117
More details, see page 117
analog audio Embedder
• 4channelanalogaudioembedder• 24bitconverters107dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentswithDIPswitches• EDHinsertionandhandling• 20or24bitembedding•Optionalwithopticaloutput(AAV-MUX-13T)
Fm-aav-muX, Fm-aav-muX-13t
analog audio de-embedder
• 4channelanalogaudiode-embedder• 24bitconverters106dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentsonDIPswitches• EDHinsertionandhandling•Optionalwithopticalinput(AAV-DMUX-R)
Fm-aav-dmuX, Fm-aav-dmuX-R
More details, see page 120
Also available with 75ohm AES-3id backplane
Also available with 75ohm AES-3id backplane
More details, see page 120
network-electronics.com | 165
Signal Processing and Synchronisation 2.1
FlaSHliNK MicrO
NtSC/PaL to SdI decoder
• 10-bitcompositetoSDIdecoder
• Automaticstandardsdetection
• EDHandfield1IDinsertion
• 2xoversampling(27MHz)
• Analoginputsw/loop-through,3SDIoutputs
• 3-lineadaptivecombfiltersandselectablefiltersettings
Fm-adC-SdI
video a/d Converter and decoder
• 10-bitcomponent,compositeorY/CtoSDIconverter
• Built-invideoPROC-AMP
• 3SDIoutputs
• 5lineadaptivecombfilterandselectablefiltersettings
• Automaticstandardsdetection
• EDHandfield1IDinsertion
Fm-adC-SdI-CC
More details, see page 130
More details, see page 130
SdI to NtSC/PaL Encoder and d/a Converter
• 10-bitSDItocompositeencoderand10-bitSDItocomponent converter in one product
• Built-inframesynchronizerw/sub-carrierandhorizontalphase adjustment
• Largeframebuffer(4frames)
• EDHmonitoring
• 4xoversampling(54MHz)
• SDIinputw/loop-through,4analogoutputs
Fm-daC-SdI
More details, see page 131
dual audio d/a Converter
• 24-bithighperformanceAEStoanalogaudioconverter
• Twoindependentconvertersononeboard
• Typicaldynamicrangeof120dBA
• TransformerbalancedAESinputs
• Allowssamplingratesfrom32–96kHz
Fm-daC-aES
More details, see page 132
dual audio a/d Converter
• 24-bithighperformanceanalogaudiotoAESconverter
• Twoindependentconvertersononeboard
• Typicaldynamicrangeof117dBA
• TransformerbalancedAESoutputs
• Internalsamplingrates44.1,48and96kHz
Also available with 75ohm AES-3id backplane
Fm-adC-aES
More details, see page 132
dual aES audio delay
• 2independentaudiodelaysignalpaths
• Built-insamplerateconverteraccepting32,41.1,48kHz
• Black-burstandAES-11referenceinput
•Upto10sdelayat48kHz
• Simultanousfixeddelayandexternallyswitchabledynamicdelay
•DelaytrackinginputforsynchronisationwithDAC-SDI,FrS-SDi or other video devices
• 2AESoutputsperdelayline
• TransformerbalancedAESin-andoutputs
Fm-dLy-aES
More details, see page 133
SdI Frame Synchronizer
• SDI10bit4:2:2framesynchronizerwithembeddedaudiohandling
• AnalogBlackBurstgenlock• Selectablefreezeonlastgoodframeorblackvideoonerror
or on loss of input signal• EDHinsertionandhandlinginaccordancewithSMPTE-
rP165•Widedelayrange,from128usupto232ms(Sample,H
and V adjustment)• Audiodelaytrackingoutput• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2synchronizedoutputs• Automaticdetectionof525-and625-lineformatinput
Fm-FRS-SdI
More details, see page 134
SdI Line Synchronizer
• SDI10bit4:2:2linesynchronizer• AnalogBlackBurstgenlock• EDHinsertionandhandlinginaccordancewithSMPTE-
rP165• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2linesynchronizedoutputs• Automaticdetectionof525-and625-lineformatinput
Fm-LIS-SdI
More details, see page 133
Hd Change-over
•Multi-ratechange-over
•Non-broadcastdataratesalsosupportednon-reclocked
• Autochange-overonsignallossorreclockerror
•Configurablechangebacklogic
• Reportssignallossandbitrate
•GPIcontrolandalarms
• IntegratedDAwith4re-clockedHD/SDIoutputs
Fm-HdSdI-CHO-2X1
More details, see page 136
SdI Change-over
• SDIchange-over
•Non-broadcastdataratesalsosupportednon-reclocked
• Autochange-overonsignallossorreclockerror
•Configurablechangebacklogic
• Reportssignallossandbitrate
•GPIcontrolandalarms
• IntegratedDAwith4re-clockedSDIoutputs
• 2inverted/2non-invertedforDVB-ASI
Fm-SdI-CHO-2X1
More details, see page 136
166 | network-electronics.com
Optical converters
FlaSHliNK MicrO
2.1
SdI Electrical to Optical converter
• 1310nmSinglemode• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/297Mcompliant
Fm-SdI-EO-13t
More details, see page 137
dual SdI Electrical to Optical converter
• 1310nm–7.5dBmF-Plaser•High-densitypackagingintheultracompact2RUframe•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswap and emergency switching• ActiveloopedSDIoutput
Fm-SdI-EO-2-13t
More details, see page 138
SdI Optical to Electrical converter
• Sensitivity-20dBm•Max.input-6dBm•Highsensitivityreceiver• Built-indualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/297Mcompliant
Fm-SdI-OE-S
More details, see page 139
dual SdI Optical to Electrical converter
• Sensitivity-20dBm•Max.input-6dBm•Highsensitivityreceiver• Built-indualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/297Mcompliant
Fm-SdI-OE-2
More details, see page 139
Hd-SdI Electrical to Optical converter
• 1310nmSinglemode• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/292Mcompliant
Fm-Hd-EO-13t
More details, see page 132
dual Hd-SdI Electrical to Optical converter
• 1310nmSinglemode• –7.5dBmF-Plaser• High-densitypackagingintheultracompact2RUframe•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswap and emergency switching•MultiformatRe-clocking
Fm-Hd-EO-2-13t
More details, see page 143
Hd-SdI Optical to Electrical converter
•Highsensitivityreceiver• Built-inquadoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/292Mcompliant
Fm-Hd-OE
More details, see page 144
dual Hd-SdI Optical to Electrical Converter
•High-densitypackagingintheultracompact 2ru frame
•Highsensitivityreceiver• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswapand emergency switching• 2OutputDistributionAmplifier•MultiformatRe-clocking• Re-clockerbypassfornon-videoformats
Fm-Hd-OE-2
More details, see page 144
dual SdI Optical to Electrical converter
network-electronics.com | 167
Datacom interfaces 2.1
FlaSHliNK MicrO
Fast Ethernet Converter
• Transmitterandreceiverononecard• 1310nm-7.5dBmF-Plaser• Twoelectricalinputs•Onboardswitch• SensitivityBetterthan-32dBm
Fm-EtH100-13t
More details, see page 148
gigabit Ethernet media Converter
• Transmitterandreceiverononecard• 10BaseT/100BaseTx/1000BaseTautosensing,compliant
with ieee 802.3 and ieee 802.3u, auto MDi/MDi-X• 1310nm-7.5dBmF-Plaser• Receiversensitivitybetterthan-25dBm•CardedgeLEDsandGYDA-SCenabled• Lowpower(2W)
Fm-EtH1000-13t
More details, see page 148
Flashlink Micro accessories
1ru shelf for up to 4 x N-bOX, including 3 front panels for empty slots
N-BOX-CaBLE
cable for centralized powering of 4 x N-bOX, includes break-out for gYDa-Sc control interface
Cable
N-BOX-SH1Ru
1Ru Shelf
Mounting plate for N-bOX, allows wall, on-table, under-table mounting, complete with screw set
N-BOX-PL1
mounting Plate
angled mounting plate for N-bOX, allows wall, on-table, under-table mounting, complete set with 2 plates and screws
N-BOX-PL2
angled mounting Plates
interconnecting plate for N-bOX, allows stapling of N-bOXes, complete set with 2 plates and screws
N-BOX-PL3
Interconnecting Plate
y-CaBLE
Y-cable – combine two power supplies for redundancy
Cable
168 | network-electronics.com
compact Distribution amplifiers
1ru cOMPacT DiSTribuTiON aMPliFierS
2.1
video Equalising distributor1x6 dual
SPECIFICatIONFrequency response 0–25MHz –3db
Differential gain < 0.2%
Differential phase < 0.2°
Video S/N ratio > 70db, 100kHz – 5MHz, unweighted
gain –1.8db to +4db
Number of inputs 2 looped, balanced
return loss > 40db to 10MHz
Number of outputs 2x6
impedance 75 ohm
Max signal 2 Vp-p
equalization 0–300m rg59u or equiv.
connector bNc
ac power external power supply 100–260Vac (included)
Dc power ±5V, connector Db9 male
Dimensions 483x44x45 mm (19”, 1ru)
v0106dEq
•Dual1x6Video•Differentialinputs•Equalizationforupto300mcable•Gainrange–1.8dBto+4dB•>25MHzBandwidth•ExternalDCcontrol
Serial digital distributor1x6 quad
SPECIFICatIONData rate 143Mbps–270Mbps
Min. signal level 0.25 nom.0.8V
Max. signal level 4.5V
Number of inputs 4 looped
Number of outputs 4x6
impedance 75 ohm
Signal processing none
connector bNc
ac power external power supply 100–260Vac (included)
Dc power ±5V, connector Db9 male
Dimensions 483x44x40 mm (19”, 1ru)
SdI0106q
•Quadruple1x6SDI•D14:2:2270Mbpscomponent•D2177MbpsPALcomposite•HighperformanceBroadcastQuality
network-electronics.com | 169
2.1
1ru cOMPacT DiSTribuTiON aMPliFierS
analog video audio distributor1x10
audIOFrequency response 20Hz–100kHz ±0.1db
crosstalk > –100db
THD+N < 0.003%
SNr > 90db ref. to 0db 20Hz–20kHz
Number of inputs 1 looped (stereo)
input impedance 47 k ohm
Max. input level +22dbu
Number of outputs 10 (stereo)
Output impedance 66 ohm
connector rca
vIdEOFrequency response 0-80MHz –3db
Differential gain < 0.07% (3.58/4.43MHz)
Differential phase < 0.1° (3.58/4.43MHz)
Video S/N ratio > 68db
gain 0db, ±0.1db
Number of inputs 1 looped
Number of outputs 10
impedance 75 ohm
return loss > 40db
Max signal 2 Vp-p
coupling Dc
connector bNc
ac power external power supply 100–260Vac (included)
Dc power ±15V, connector Db9 male
Dimensions 483x44x40 mm (19”, 1ru)
av0110
•1x10Video/Audio•100kHzAudioBandwidth•80MHzVideoBandwidth•BroadcastSpecification•Studio,CCTV,Duplication
analog Stereo audio distributor1x8 dual
SPECIFICatIONFrequency response 20Hz–100kHz ±0.1db
crosstalk > –100db
THD+N < 0.003%
SNr > 90db ref. to 0db 20Hz–20kHz
Number of inputs 4 mono (2 stereo)
input impedance > 10 k ohm
Max. input level +23dbu
Number of outputs 4x8 mono (2x8 stereo)
Output impedance > 66 ohm
connector Db25 female
gain adjustment ± 6db
unbalanced inputs 4 mono
input impedance 47 k ohm
ac power external power supply 100–260Vac (included)
Dc power ±15V, connector Db9 male
Power consumption 9W max
Dimensions 483x44x45 mm (19”, 1ru)
a0108dS
•Dual1x8Stereo•100kHzAudioBandwidth•Balancedinputsandoutputs•Additionalunbalancedinputs•Broadcastspecification
compact Distribution amplifiers
170 | network-electronics.com
analog video distributor1x6 quad
SPECIFICatIONFrequency response 0–500MHz –3db
Differential gain < 0.07%
Differential phase < 0.22°
Video S/N ratio > 70db
gain 0db, ±0.1db
Number of inputs 4 looped
Number of outputs 4x6
impedance 75 ohm
return loss > 40db
Max signal 2 Vp-p
coupling Dc
connector bNc
ac power external power supply 100–260Vac (included)
Dc power ±5V, connector Db9 male
Dimensions 483x44x40 mm (19”, 1ru)
v0106q
•Quadruple1x6Video•PAL,NTSC,HDTV,YC,SVGA,RGBS•500MHzVideoBandwidth•HighperformanceBroadcastQuality
quadruple digital audio aES/EBu distributor
SPECIFICatIONSignal type aeS/ebu digital audio (Stereo)
balanced inputs 4x transformer coupled aeS3-110
Signal amplitude 0,2 – 7Vp-p
connector Db25 female, impedance 110 ohm
unbalanced inputs 4x 75 ohm 1Vp-p unbalanced coax, SMPTe 276M
Signal amplitude 100mVp-p to 1Vp-p
connector rca, impedance 75 ohm
Outputs 4x8 aeS3-110
Signal amplitude 4Vp-p ± 1Vp-p
connector Db25 female, impedance 110 ohm
Jitter 0.7ns
Sampling rates 32 – 48kHz
ac power external power supply 100–260Vac (included)
Dc power +5V, connector Db9 male
Dimensions 483x44x45 mm (19”, 1ru)
ad0108q
•Quadruple1x8AES/EBUdistributor•AES3,AES-3id/S/PDIFinput•48kHzcompatible•Lowjitterspec
compact Distribution amplifiers
1ru cOMPacT DiSTribuTiON aMPliFierS
2.1
network-electronics.com | 171
2.1
SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON
Flashlink accessories
SINgLE mOdE PatCH CORdS
Order no. Description:
Sc/SPc-1 Sc Patch cord 1m
Sc/SPc-2 Sc Patch cord 2m
Sc/SPc-3 Sc Patch cord 3m
Sc/uPc-Fc/Pc-1 Sc-Fc Patch cord 1m
Sc/uPc-Sc/aPc Sc/aPc Patch cord
(8O cut angle) 1m
Other lengths or multi mode patch cords on
request
PIgtaILS
Order no.:
Sc/uPc Pigtail 1m
Sc/uPc Pigtail 2m
Sc/uPc Pigtail 3m
attENuatORS
Order no.:
Sc-attenuators 5db
Sc-attenuator 10db
CLEtOP – FIBER CLEaNINg
Order no. Description:
cleTop For cleaning your
Fiber connections
cleTop Tape Spare tape for cleTop
Cat5 – CaBLES
Order no. Description:
caT-5/SerPort-1 m cable connection
Frame to Pc
OtHER aCCESSORIESOrder no. Description
Fr-Fan-1ru Fan for ventilation, 1 ru Db25Pin adaptor Small print-card with Db25 to screw-terminal
3m x XlrM-25pin Network Db25pin audio contact to 8 x XlrM (Male), 3 meter cable
3m x XlrM-15pin Network Db15pin audio contact to 4 x XlrM (Male), 3 meter cable
Db15-Db25 cable interconnect cable aDc-aeS to aV-MuX-xxxx
Db25-Db15 cable interconnect cable aV-MuX-xxxx to aDc-aeS
POWER SuPPLy FOR FLaSHLINk FRamE
PWr-ac15/15/5/5V Power supply with 2 x 15V and 2 x 5V, 60W, input 110-260Vac auto-sensing, for spare or redundant supply
PWr-Dc15/15/5/5V Power supply with 2 x 15V and 2 x 5V, 60W, input 36-72VDc auto-sensing, for spare or redundant supply
3Rd PaRty INtERFaCES
Multiple 3rd Party interfaces may be used in conjunction with the Flashlink optical product range. These interfaces further expand the variety of signal formats that can be transported on all our platforms: PtP, WDM, cWDM and DWDM
Since its introduction in 1996, the vikinX Compact range has dominated the marketplace through its simplicity,
reliability and affordability. today the product is one of the most deployed routing switchers in the world.
VikinX routers
RELIaBILItyThe range was followed by VikinX Modular, a range of
modular routing products that has been built with reliability
and affordability as the most important design criteria.
The reliability of the router, due to fully redundant control
architecture and extremely low power consumption are
the major reasons why the VikinX Modular product can be
found in the most mission critical applications.
uNmatCHEd FLEXIBILItyanother reason is the unmatched flexibility of the VikinX
Modular control system, offering control features far beyond
other comparable routing systems.
as the only system available with full TcP/iP connectivity,
VikinX Modular reduces the capital expenses necessary to
install the system down to a minimum.
reliability through design simplicity as well as easy to
operate user interfaces keep the operational expenses at a
low level, thus resulting in low cost of ownership.
When adding the 256x256 VikinX Modular in 2006, the line
of modular routing products offers a wide range of different
frame sizes and signal formats covered.
vIkINX SuBLImEin 2006 we introduced VikinX Sublime, built to maintain and
extend our leadership in the market for small and medium
routing applications. VikinX Sublime raises the standard for
reliability, affordability and flexibility in its segment.
The VikinX Sublime range offers the broadcast market the
most extensive range of matrix sizes available (8x8 to 64x64
and 128x2) and covers signal formats from analog video/
audio to HDTV also incorporating 1080p 3gbps Single
link HD. in addition, VikinX Sublime provides many of the
powerful control features that drove the VikinX Modular
range to success.
VikinX Sublime offers flexible routing solutions for general
purpose facilities and on-air routing as well as mobile outside
broadcast applications and sophisticated a/V applications.
EaSy tO uSENetwork electronics’ VikinX System configurator is
developed to eliminate the obstacles installers and
operators face when setting-up and configuring complex
routing solutions. One of the latest examples for easy-
to-use software is the VikinX System configurator that
accommodates wizards and convenient drag & drop menus
comfortably guiding the operator through the installation
process. Together with Network electronics’ proven routing
hardware, the control system with all its control panel
options and software features provides probably the most
comprehensive and reliable routing switcher products in the
business.
network-electronics.com |
ViKiNX SubliMe
VikinX Sublime offers the broadcast industry the most
extensive range of matrix sizes available (8x8 to 64x64 and
16x2 to 128x2) and covers signal formats from analogue
video/audio to HDTV, with our SMPTe-292 HD products
providing support for the 3gbps dual link standard.
a full range of 3gbps single link HD products is available,
underscoring our commitment to providing future-proofed
products wherever possible.
Flexible control solutions includes support for local and
remote panels, equipped with professional broadcast quality
programmable buttons.
VikinX Sublime provides many of the powerful control
features that have made the VikinX Modular range a
success story. control options such as serial control rS-232,
ethernet and Network control bus enable solutions from the
VikinX Sublime range to fit into any application, from small
production facilities up to large networks with centralized
management through eTH-cON. in addition, numerous
third party interface options allow the integration of VikinX
Sublime at installations that employ proprietary vendor
connectivity solutions.
VikinX Sublime offers flexible routing solutions for general
purpose facility and on-air routing as well as mobile outside
broadcast applications and sophisticated a/V applications.
kEy FEatuRES• Analoguevideo/audio,AES,SD-SDI,E4,STM-1from8x8to64x64•MultiformatHD-SDIfrom8x8to64x64withsupportfor3GbpsDual
link HD• SingleLink3GbpsHDfrom8x8to32x32•Non-squarematrixsizesfrom16x2to128x2• Re-clockingandnon-reclockingSD/HD-SDI•ControlviaEthernet,RS-232,NetworkControlBus(NCB)• Spacesaving5cm(2in)framedepthallowingfrontandrearrack
mount• Flexiblematrixpartitioning• Flexiblelocalandexternalcontrolpanelswithprofessionalbroadcast
quality buttons• Programmablebuttonconfiguration• ExternalcontrolpanelsprovidingmultipurposeGPI/GPO•Ultra-lowpower,high-reliabilitydesign•DualDCpowerinlet• Redundantpowersupplies(brickorframe)withfrontindicators• Signaldiagnostics(signalpresence,re-clocking,EDH)• SeamlessinteroperabilitywithVikinXModularrouters• Syncwithloop-through,tri-levelonHDrouters•Mountingtraysforbrickpowersupply
Marking a new era
VikinX Sublime
173
174 | network-electronics.com
SL-v1602
16x2
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-V1602-cP)
analog Video
ViKiNX SubliMe
2.2
SPECIFICatIONSFrequency response 0–125MHz –3db
DiFFerentiaL Gain08x08, 16x16 <0.1% (3.58/4.43MHz)32x32, 64x64 <0.2% (3.58/4.43MHz)
DiFFerentiaL phaSe08x08, 16x16 <0.1° (3.58/4.43MHz)32x32, 64x64 <0.2° (3.58/4.43MHz)
crosstalk < –60db (3.58/4.43MHz)
Video S/N ratio typ. 70db, unweighted
bar tilt < 0.1%
Lum. non-Linearity08x08, 16x16 <0.1%32x32, 64x64 <0.2%
impedance 75 ohm
return loss typ. 40db @ 10MHz
Max signal 2Vp-p
coupling Dc
Dc offset <15mV
connector bNc
ac power external power supply 100–260 Vac
Dc power ±15V, connector Db9 male
SL-v3232
SL-v6464
SL-v0808
8x8
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-V0808-cP)
32x32
Dimensions: 483x88x50 mm (19”, 2ru)also available with X-Y control Panel integrated in the front (Sl-V3232-cP)
64x64
Dimensions: 483x176x50 mm (19”, 4ru)also available with X-Y control Panel integrated in the front (Sl-V6464-cP)
• AnalogVideoRouter• Partitioning(forsquareroutersonly)• SL-V1602:expandableupto64x2• BuiltinControlPanelAvailable•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters
SL-v1616
16x16
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-V1616-cP)
network-electronics.com | 175
analog audio 2.2
ViKiNX SubliMe
SL-a1602
16x2
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-a1602-cP)
SPECIFICatIONSFrequency response 20Hz–20kHz ± 0.1db
croSStaLk8x8, 32x32 <–100dbup to 20kHz64x64 <–90db up to 20kHz (<–100db up to
5kHz)
THD+N < 0.01% @ +6dbu < 0.01% @ +22dbu
input impedance > 10 kohm
cMrr > 60db
Output impedance < 66ohm
audio connector Db25 female
ac power external power supply 100–260 Vac
Dc power ±15V, connector Db9 male
SL-a3232
SL-a6464
SL-a0808
8x8
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-a0808-cP)
32x32
Dimensions: 483x88x50 mm (19”, 2ru)also available with X-Y control Panel integrated in the front (Sl-a3232-cP)
64x64
Dimensions: 483x176x50 mm (19”, 4ru)also available with X-Y control Panel integrated in the front (Sl-a64643232-cP)
• BalancedstereoAnalogAudioRouter•CanbeusedforTimeCoderouting• BuiltinControlPanelavailbable• Partitioning(forsquareroutersonly)• SL-A1602:expandableupto128x2•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters
SL-a1616
16x16
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-a1616-cP)
176 | network-electronics.com
SD Digital Video
ViKiNX SubliMe
2.2
SL-Sd1602
16x2
SPECIFICatIONSData rate NrZ 143Mbps–540Mbps
reference input comp. Video 1Vpp, 300mV sync, 75 ohm
equaLization reclocked routers(r) 0 to 300m @ 270Mbps, typical belden 8281
Non-reclocked routers(N) 0 to 200m @ 270Mbps, typical belden 8281
re-clocking On r-versions only
impedance 75 ohm
return-loss in/out > 15db (5MHz–540MHz)
Signal level nom. 800mVp–p ±10%
rise/fall time typ. 700ps
connector bNc
ac power external power supply 100–260 Vac
Dc power ±15V, connector Db9 male
SL-Sd3232
SL-Sd6464
SL-Sd0808
8x8
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front(Sl-SD0808N-cP and Sl-SD0808r-cP (with re-clocking))
32x32
Dimensions: 483x88x50 mm (19”, 2ru)also available with X-Y control Panel integrated in the front(Sl-SD3232N-cP and Sl-SD3232r-cP (with re-clocking))
64x64
Dimensions: 483x176x50 mm (19”, 4ru)also available with X-Y control Panel integrated in the front(Sl-SD6464N-cP and Sl-SD6464r-cP (with re-clocking))
• SeriealDigitalVideoRouter• Availableversionswithorwithoutreclocking• Availablewithintegratedcontrolpanel• ControlviaIP/Ethernet,RS-232,NCB• Partitioning(forsquareroutersonly)• SL-SD1602:expandableupto64x2• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters•DVB-ASIcompatible
SL-Sd1616
16x16
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front(Sl-SD1616N-cP and Sl-SD1616r-cP (with re-clocking))
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-SD1602r-cP)
network-electronics.com | 177
3g-HD Digital Video 2.2
ViKiNX SubliMe
SL-3gHd1602
16x2
SPECIFICatIONSData rate NrZ 143Mbps–2,970gbps
reference input NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
equalization 0 to 100m @ 2,970gbps, typical belden 1694a
impedance 75 ohm
return-loss in/out < –15db, 5MHz –1.5gHz < –10db, 1.5gHz –3gHz
Signal level nom. 800mVp-p ±10%
rise/fall time 20%–80% – SD limit: 0.4ns-1.5ns, <0.5ns rise/fall variation – HD limit: <270ps, <100ps rise/fall variation – 3g-HD limit: <135ps, <50ps rise/fall variation
connector bNc
ac power external power supply 100–260 Vac
Dc power ±15V, connector Db9 male
SL-3gHd3232
SL-3gHd6464
SL-3gHd0808
8x8
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-3gHD0808-cP)
32x32
Dimensions: 483x88x50 mm (19”, 2ru)also available with X-Y control Panel integrated in the front
(Sl-3gHD3232-cP)
64x64
Dimensions: 483x176x50 mm (19”, 4ru)also available with X-Y control Panel integrated in the front
(Sl-3gHD6464-cP)
•HighDefinitionVideoRouter• Availablewithintegratedcontrolpanel•MultiformatSD-SDI,HD-SDIand3G-HD• Re-clockingonallstandardvideorates• Partitioning(forsquareroutersonly)• Singlelink3Gbps,1080p•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters•DVB-ASIcompatible
SL-3gHd1616
16x16
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-3gHD1616-cP)
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-3gHD1602-cP)
178 | network-electronics.com
Digital audio
ViKiNX SubliMe
2.2
SL-ad1602-110
16x2
SPECIFICatIONSSignal type aeS/ebu digital audio (Stereo)
input impedance 110ohm
Output impedance 110ohm
Jitter < 0.025ui
Signal level 0.2 – 7Vp-p
Sampling rates 32 – 96kHz
Switching mode asynchronous
audio connector Db25 female
ac power external power supply 100–260Vac
Dc power +15V, connector Db9 male
SL-ad3232-110
SL-ad6464-110
SL-ad0808-110
8x8
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-aD0808-110-cP and Sl-aD0808-75-cP)
32x32
Dimensions: 483x88x50 mm (19”, 2ru)also available with X-Y control Panel integrated in the front
(Sl-aD3232-110-cP and Sl-aD3232-75-cP)
64x64
Dimensions: 483x176x50 mm (19”, 4ru)also available with X-Y control Panel integrated in the front
(Sl-aD6464-110-cP and Sl-aD6464-75-cP)
•DigitalAudioRouter–110ohm•Availableinubalanced75ohmversion(BNCconnectors)• AvailablewithintegratedControlPanelinfront(CPversion)• Set-upoverIPbasedSystemConfigurator• Partitioning(forsquareroutersonly)• SL-AD1602:expandableupto128x2•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters
SL-ad1616-110
16x16
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-aD1616-110-cP and Sl-aD1616-75-cP)
Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front
(Sl-aD1602-110-cP and Sl-aD1602-75-cP)
network-electronics.com | 179
rS-422 Data 2.2
ViKiNX SubliMe
SPECIFICatIONSData rate 115.2 kbs
connector Db9 female
ac Power external power supply 100–260Vac
Dc Power +5V, connector Db9 male
SL-d32P
32 ports
Dimensions: 483x88x50 mm (19”, 2ru)
• PortedRS-422datarouter• ForflexibleVTR/Devicecontrol• Ethernet/RS-232/NCBcontrol• ConfigurationwithIPbasedsystemconfigurator
180 | network-electronics.com
Sublime accessories
ViKiNX SubliMe
2.2
SL-PWR-4040W Power Supply for VikinX Sublime router series
SL-PWR-9090W Power Supply for VikinX Sublime router series
SL-mt-6PSu1 ru mounting tray for 6x Sl-PWr-40 or 3 x PWr-90
SL-mt-BPblindplate for 2 positions of Sl-MT-6PSu
dB25PIN adaPtORSmall print-card with Db25 to screw-terminal
3mXXLRF-25PINaudio breakout cableDb25pin XlrF, 3 meter cable
3mXXLRm-25PINaudio breakout cableDb25pin XlrM, 3 meter cable
SL-mt-2PSu1 ru tray for 2x Sl-PWr-40 or 1 x Sl-PWr-90, to be placed behind the VikinX Sublime router
can also be used with other sizes:
network-electronics.com | 181
redundancy 2.2
ViKiNX MODular
a dead power supply can break down your whole router system. a
damaged ethernet Switch can create incorrect or no communication
at all in your system. The signal path could be broken, leaving you
with no video output.
redundancy has always been a top priority in broadcast. On-air
24/7/365 – this is the requirement. When designing products and
solutions for the broadcast industry, redundancy is a priority for
Network electronics. Technical error or interruptions in the program
signal path are important to prevent.
redundancy is discussed in many areas of a broadcast installation,
from redundant power systems, redundant system control, redundant
signal path and more complex monitoring applications with SNMP
support.
To be able to fulfill the market requirements for mission critical
applications, Network electronics includes redundancy in all our
products and solutions. You will find redundancy in the product itself,
the internal and external wiring, in 3rd party SNMP applications or
redundancy by smart system design.
bear in mind Network electronics’ vision of manufacturing low
power, compact and new technology products, software and
SNMP applications are used as enablers for redundancy. Software
applications can keep overview of system condition, report
abnormalities and take acTiON. instead of bringing more hardware
onboard, clever engineering and new technologies enable Network
electronics to continue providing compact products with redundant
designs at an affordable price.
Main input source
OutputOn-Air
Automaticchange-over
Any ofx-point 1–128
Any ofx-point 129–256
Any of1–128
Any of129–256
PowerA
Main signal sourceredundant
PowerB
PowerD
PowerC
UPS
SYSCON SYSCON
UPS
182 | network-electronics.com
WIdESt RaNgE OF SIgNaL FORmatSNetwork electronics’ VikinX family of modular routers accommodates
the widest range of signal formats, including HD-SDi, SD-SDi, analog
audio, aeS/ebu audio and telecom. Most of these signals can all be
mixed in the same frame.
independent of signal format, all components are front loaded and
hot-swappable. VikinX Modular allows configurations up to 256 x
256 with increments of 32 x 32.
BRIdgE LINE CONCEPtWith the 256x256 VikinX Modular router Network electronics
introduces the bridge line concept providing a 16 signal wide bus,
allowing to route any signal in the router through Flashlink signal
processing and fiberoptic devices that can be placed in dedicated
slots in the router.
bridge-lines make it possible to internally switch line or frame-
synchronizers, a/D and D/a converters or fiberoptical interfaces
into the signal path, thus enabling signal error suppression, domain
conversion, fiberoptical conversion and trunking.
tCP/IP INtERCONNECtIvItyall VikinX Modular devices provide TcP/iP interconnectivity, an ideal
way of operating a routing system from remote sites, independent of
whether those are within a campus or on another continent.
vIkINX SyStEm CONFIguRatOReach control panel has its own database containing configuration files
for the Software configurable Keys. New configurations can easily be
made using the VikinX System configurator software tool.
With the expandable Panel concept, allowing grouping of several
panels into one logical control unit and the customised Surface
Design, giving unlimited possibilities in designing user surfaces, the
VikinX Modular range of control panels provides one of the most
sophisticated router control systems available.
all routers can be controlled remotely through Pcs, other
manufacturers control equipment or Network’s own THOr Windows-
based software.
New features are continuously added to make the use of the system
even more simple and comfortable.
The steadily growing number of third party interfaces allows
installation of VikinX Modular routers in existing third party systems.
Those systems can also be controlled from a VikinX Modular control
system including the THOr Windows software in order to obtain
all advantages provided by the Network electronics router control
system.
NO COmPROmISEHeat and high power consumption are the enemies of any
electrical device. Network electronics’ routers have ultra low power
consumption and air flow to provide best possible whorking
conditions to a central router, securing reliability and maximum
running time.
FRamE SIzESThe VikinX Modular series comes in three frames sizes.
The 5ru series (S) is for routers where space is at a premium and a
maximum of 64x64 cross points is needed.
everything is the same for the 9ru (M) series except it has space for
up to 128x128 cross points.
The 21ru (l) series still uses the same building blocks and provides
256x256 cross points.
Physical Dimensions483x400x340 mm (19”, 9ru)
Physical Dimensions483x220x340 mm (19”, 5ru)
a simple, elegant router design•HighReliability• EasyUpgrades• EasyMaintenance
Modular Frames
ViKiNX MODular
2.2
Physical Dimensions483x924x340 mm (19”, 21ru)
network-electronics.com | 183
Single board Matrix Design– 32x32 matrix modules
2 x gYDa-VX2 x SYScON
2 x Power Supplies
Single board Matrix Design– 32x32 matrix modules
2 x SYScON2 x Power Supplies
Modular Frames 2.2
ViKiNX MODular
tHE SImPLE, ELEgaNt dESIgN• Highreliability
• Lowpowerconsumption
• Loadsharingpowersuppliesrunningatverylowlevel
• Minimumnumberofcircuitmodules
• Minimumnumberofmoduleinterconnections
• RedundantFanswithplentyofair-spaceandlownoise
EaSy SERvICEaBILIty• Noactivecomponentsonrearpanel
• Allfrontloading,hotswappablemodules
• Minimal#ofsparestostock
• Easyupgradetolargermatrixsizes
a control System architecture for today’s needs
a ROutER WItH tHE COmPLEtE SEt OF FEatuRES• MeetsallrelevantSMPTEspecifications
• IncludesSNMP,Webtools
• HighlevelofRedundancy
SImPLE aNd FamILIaR INtERCONNECt• Worksverywellforsmallsystems
• Worksverywellforlargerarrangements
– grow with facility
• Supportsremotesitesextremelywell
FEatuRES• 2PowerSupplies(4xinL) – redundant and load sharing (single PSu (2x in l) included in the router price) • 2SystemControllersSYSCON – System controller for all VikinX modular routing switchers (single SYScON
included in the router price) – redundant and Dual level control with different protocols – crosspoint configuration on flash card – Dual Sync inputs – Simultaneous switching of entire matrix • Built-inmonitoringmatrixwith1outputper32x32block• InternalBridgeLinesforadvancedprocessingandfiber(256x256only)• SD-SDI,HD-SDIandAESdigitalaudioroutinginoneframe•Mixed525/625operation• Tri-LevelSync• IndependentEthernetandserialports – Fully redundant internal control architecture • 2Status,monitoring,alarmingmodulesGYDA-VX – Optional router control module – Signal diagnostics – redundant SNMP and Web-based interaction
CONtROL INtERFaCESSerial ports:2x rS-232/422/485 with standard SYScON2x rS-232/422/485 with redundant SYScON
connector Db9 femaleethernet ports:1x 10/100base-T with standard SYScON1x 10/100base-T with redundant SYScON1x 10/100base-T with standard gYDa-VX1x 10/100base-T with redundant gYDa-VX
connector rJ45
POWER SuPPLIES
ac range 90-130Vac / 180-254Vac switchable, 50-60Hz, 300W
connector iec 320, separate input for each power supply
Dc range 36-72VDc, 300W connector Screw terminalalarm Power alarm relay contact closure connector rJ45
cooling Type internal forced air
184 | network-electronics.com
Serial digital video Routers
vd256256L
SD Digital Video
ViKiNX MODular
2.2
ELECtRICaL SIgNaL INPutSStandard SMPTe 259M
Data rate 19.4Mbps – 540Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5-540MHz)
cable equalization 0 to 300m typical belden 8281
ELECtRICaL SIgNaL OutPutSconnector 75 ohm bNc female
Signal level 800mVp-p ±10%
Signal Polarity Non-inverting with respect to inputs
impedance 75 ohm nominal
return loss > 15db (5-540MHz)
REFERENCE INPutSNumber of inputs 2 standard, both reference signals
supplied to both SYScON when used in redundant mode
connectors 75 ohm bNc female, loop-thru
return loss > 40db (100kHz – 5MHz), >35db (5-10MHz)
Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
Signal level Nominal 1.0Vp-p
Field Selectivity Odd / random field selectable
Timing range adjustable in 1 line steps
aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.
Physical Dimensions483x924x340 mm (19”, 21ru)
network-electronics.com | 185
HD Digital Video 2.2
ViKiNX MODular
High definition digital video Routers
Hd256256L
ELECtRICaL SIgNaL INPutSStandard SMPTe 292M
Data rate 19.4Mbps – 1485Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5MHz-1.5gHz)
cable equalization 0 to 100m typical belden 1694a
ELECtRICaL SIgNaL OutPutSconnector 75 ohm bNc female
Signal level 800mVp-p ±10%
Signal Polarity Non-inverting with respect to inputs
impedance 75 ohm nominal
return loss > 15db (5MHz-1.5gHz)
REFERENCE INPutSNumber of inputs 2 standard, both reference signals supplied
to both SYScON when used in redundant mode
connectors 75 ohm bNc female, loop-thru
return loss > 40db (100kHz – 5MHz),
>35db (5-10MHz)
Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
Signal level Nominal 1.0Vp-p
Field selectivity Odd / random field selectable
Timing range adjustable in 1 line steps
aLaRm INtERFaCES card edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.
Physical Dimensions483x924x340 mm (19”, 21ru)
186 | network-electronics.com
Serial digital video Routers
vd128128m / vd6464S
SD Digital Video
ViKiNX MODular
2.2
ELECtRICaL SIgNaL INPutSStandard SMPTe 259M
Data rate 19.4Mbps – 540Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5-540MHz)
cable equalization 0 to 300m typical belden 8281
ELECtRICaL SIgNaL OutPutSconnector 75 ohm bNc female
Signal level 800mVp-p ±10%
Signal Polarity Non-inverting with respect to inputs
impedance 75 ohm nominal
return loss > 15db (5-540MHz)
REFERENCE INPutSNumber of inputs 2 standard, both reference signals supplied
to both SYScON128 when used in redundant mode
connectors 75 ohm bNc female, loop-thru
return loss > 40db (100kHz – 5MHz), >35db (5-10MHz)
Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
Signal level Nominal 1.0Vp-p
Field Selectivity Odd / random field selectable
Timing range adjustable in 1 line steps
aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.
VD128128M
VD6464S
network-electronics.com | 187
HD Digital Video 2.2
ViKiNX MODular
High definition digital video Routers
Hd128128m / Hd6464S
ELECtRICaL SIgNaL INPutSStandard SMPTe 292M
Data rate 19.4Mbps – 1485Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5MHz-1.5gHz)
cable equalization 0 to 100m typical belden 1694a
ELECtRICaL SIgNaL OutPutSconnector 75 ohm bNc female
Signal level 800mVp-p ±10%
Signal Polarity Non-inverting with respect to inputs
impedance 75 ohm nominal
return loss > 15db (5MHz-1.5gHz)
REFERENCE INPutSNumber of inputs 2 standard, both reference signals supplied
to both SYScON-SM when used in redundant mode
connectors 75 ohm bNc female, loop-thru
return loss > 40db (100kHz – 5MHz),
>35db (5-10MHz)
Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
Signal level Nominal 1.0Vp-p
Field selectivity Odd / random field selectable
Timing range adjustable in 1 line steps
aLaRm INtERFaCES card edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.
HD128128M
HD6464S
188 | network-electronics.com
analog Stereo audio Routers
a128128m / a6464S
ELECtRICaL SIgNaL INPutSType balanced
connector Db25 female
impedance > 10 kohm
cMrr > 60db
Max. level +23dbu
ELECtRICaL SIgNaL OutPutSType balanced
connector Db25 female
impedance < 66 ohm
cMrr > 40db
Max. level +23dbu
gain adj. 1.0db (compensation for 600 ohm load)
PERFORmaNCEFrequency response 20Hz – 125kHz (-3db),
20Hz – 20kHz ±0.1db
adjacent crosstalk > 100db, 20Hz – 20kHz
SNr < -90dbu(a)
THD+N < 0.01% at 6dbu
click noise < -50dbu
aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX
analog audio
ViKiNX MODular
2.2
a128128M
a6464S
network-electronics.com | 189
digital audio, aES/EBu Routers
ad128128m / ad6464m
ELECtRICaL SIgNaL INPutSType Transformer balanced
connector Db25 female
impedance 110 ohm
Signal level > 0.2 – 7Vpp
ELECtRICaL SIgNaL OutPutSType Transformer balanced
connector Db25 female
impedance 110 ohm
PERFORmaNCESampling rates 32–96kHz
Switching mode asynchronous
Jitter Typical 800ps
REFERENCE INPutSNumber of inputs 2 standard, both reference signals supplied
to both SYScON-128 when used in redundant mode
connectors 75 ohm bNc female, loop-thru
return loss > 40db (100kHz – 5MHz), >35db (5-10MHz)
Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
Signal level Nominal 1.0Vp-p
Field selectivity Odd / random field selectable
Timing range adjustable in 1 line steps
aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX.
Digital audio + Telecom 2.2
ViKiNX MODular
140/155mbps telecom Routers
t128128-140/155m / t6464-140/155S
ELECtRICaL SIgNaL INPutSStandard iTu g.703 cMi
Data rate 140Mbps / 155Mbps
connector 75 ohm bNc female
impedance 75 ohm nominal
return loss > 15db (5-540MHz)
cable equalization 0 to 300m typical belden 8281
ELECtRICaL SIgNaL OutPutSconnector 75 ohm bNc female
Signal level 1000mVp-p ±10%
Signal Polarity Non-inverting with respect to inputs
impedance 75 ohm nominal
return loss > 15db (5-540MHz)
REFERENCE INPutSNumber of inputs 2 standard, both reference signals supplied
to both SYScON-128 when used in redundant mode
connectors 75 ohm bNc female, loop-thru
return loss > 40db (100kHz – 5MHz), >35db (5-10MHz)
Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M
Signal level Nominal 1.0Vp-p
aLaRm INtERFaCES card edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX.
190 | network-electronics.com
along with the broad range of VikinX routing switchers, Network
electronics provides numerous possibilities to either direct or
remote control of all switching devices. From simple single bus and
X-Y control panels for smaller applications to advanced iP control
panels, SNMP control and web client for highly flexible large router
applications, there is always a control set-up that fits the needs of
your application.
SyStEm CONFIguRatOR SOFtWaRENew panel configurations can easily be made using the VikinX System
configurator software tool, developed to eliminate the obstacles
installers and operators face when setting-up and configuring
complex routing solutions. The VikinX System configurator
accommodates wizards and convenient drag & drop menus
comfortably guiding the operator through the installation process.
ROutER CONtROLLERWith the VikinX Modular router controller SYScON we have taken
system security onto new heights. Through our fully redundant
control architecture, from the independent control ports on the
router to the crosspoint switch controller, we can offer the highest
reliability possible in a routing system. The SYScON control
system completely avoids single points of failure, like changeovers,
centralized main controllers or similar. SYScON retains the system
database in an easy removable compact Flash card. SYScON
provides both serial and ethernet/iP interfaces. The iP connectivity
allows operating a routing system from remote sites, independent
of whether those are within a campus or on another continent. Our
intelligent iP control panels automatically obtain the iP address of the
redundant SYScON in case there is an error on the main controller.
SNmP CONtROLWith the gYDa-VX monitoring and control device we are offering
signal diagnostics on a user friendly web interface as well as
SNMP control, allowing our routers to be controlled by a Network
Management System.
INtELLIgENt CONtROL PaNELSintelligent control panels accommodate features and user interface
flexibility that typically require a huge selection of different products.
With the VikinX panels you can create an unlimited number of
different user interfaces exactly fitting your operational requirements.
each control panel has Software configurable Keys allowing simple
operation like Single bus or X-Y, but also complex Multi-level /
Multi-crosspoint operations. The expandable Panel concept allows
grouping of several panels into one logical control unit. customised
Surface Design is giving unlimited freedom in designing button lay-
outs.
VikinX configuration, control and Monitoring
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2.2
WEB PaNELWeb Panel was developed to simplify the use of routers in a
computer-based environment. Network electronics’ System
configurator contains a given number of web panel templates
available to the user, fully configurable with all the features offered in
the company’s VikinX iP based hardware control panels. Web Panel
works with browsers like Firefox, Safari, and Opera and provides a
control interface compatible with Windows, Mac and linux.
Web Panel features:
• WebPanelserverfeaturesinclude:
– install to a single Windows web server
– activity log
– client log-in via standard web browser
– iP verification for iT security
• WebPanelclientfeaturesinclude:
– Platform independent, router control from Pc, Mac or linux
– Web panel templates, software configurable keys
– router access according to user rights
– No software installation required on client computer
– advanced router control features
network-electronics.com | 191
Direct and remote control 2.2
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2 x CP 16 LCD
CP MDP
Video L1
CP 16 LCD
2 x CP 44 MEC
CP 44 MEC
CP 44 MEC and CP 16 LCD
Video L2
Video L3
Site 2
Site 1
AdditionalControl
2 x CP 16 LCD
Video L1
CP 16 LCD
2 x CP 44 MEC
CP 44 MEC and CP 16 LCD
CP 44 MEC
Video L2
Video L3
Site 3
CP MDP
InternetTHORTHOR
RouterManagement
System
VikinX SystemConfigurator
VikinX Compact routers and control panels
VikinX Sublime routers
VikinX Sublime control panels
3rd party control androuter systems
ETH-CON
Ethernet
RS232
NetworkControl Bus
(NCB)
THOR
Numerous possibilities for both direct and remote control of all
components …
through the use of panels, Pcs, SYScON, gYDa, other manufacturers control equipment and THOr
For direct control of the VikinX compact routers, Network electronics
has developed a flexible and expandable range of compact panels.
For the VikinX modular routers, Network electronics offers a range of
iP-based control panels that allows the use of standard ethernet laN.
To further allow for flexibility, the eTH-cON enables compact routers
and control panels to interconnect with the modular control system.
Thus the modular control panels can be used to control compact
routers and the advanced features of the modular control system are
made available for compact routers. The SYScON cards contain the
configuration database for the modular routers and optionally for the
panels on an easily replaced compact Flash card.
gYDa-VX gives the modular routing line a comprehensive alarming/
surveillance and SNMP control. gYDa-VX is available both as single
controller and dual redundant controller.
The THOr router management system is a Windows-based router
control system for the VikinX compact and modular router series.
THOr offers a wide and modular range of features that provides
complete control and multiple configuration options.
192 | network-electronics.com
control and Monitoring
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2.2
SySCON
SyStEmcPu 400MHz intel PXa255 StrongarM
Memory compact Flash
ELECtRICaL INtERFaCES2 x rS-232 or rS-422 control ports on Db9F conforming to ibM Pc (rS-232) or SMTPe207M (rS-422)
1 x 10baseT/100base-TX fast ethernet, full duplex capable
POWER CONSumPtION+5V, typ. 400 ma. Maximum 3W
SySCON-256 / SySCON-128 / SySCON-64
gyda
SyStEmcPu 400MHz intel PXa255 StrongarM
Memory compact Flash
ELECtRICaL INtERFaCES1 x 10baseT/100base-TX fast ethernet, full duplex capable
POWER CONSumPtION+5V, typ. 400 ma. Maximum 3W
gyda-vX
•WEBinterfacetoolforroutermonitoringandcontrol,SNMPAgent.•WEBinterfaceHTTPver.1.1,HTMLver.4.01,compatiblewithallmajor
browsers, SNMP ver. 3.0, user based Security Model •Monitoringandcontrolfeaturesavailableonbothuserinterfaces• Signalpresencedetectiononinputs• ReadingRe-clockerlockandlockrate143,177,270,360,540,
1485/1483.5 on all outputs • SYSCONError• EDHMonitoring• PossibilityforseparatedEthernetconnectionsformonitoringandcontrol
gYDa-VX
network-electronics.com | 193
ethernet connections 2.2
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
ethernet connectivity for VikinX compact and Sublime routers.
control, configure or monitor your infrastructure from anywhere
RouterManagement
System
VikinX SystemConfigurator
VikinX Compact routers and control panels
VikinX Sublime routers
VikinX Sublime control panels
3rd party control androuter systems
ETH-CON
Ethernet
RS232
NetworkControl Bus
(NCB)
THOR
EtH-CON
EtH-CON
194 | network-electronics.com
Modular control Panels
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2.2
expandable Panel concept
2 x cP 16 lcD interconnected via the ePc bus will logically appear as one panel on the VikinX modular control bus.
cP 16 lcD and cP 44 Mec interconnected via the ePc bus will logically appear as one panel on the VikinX modular control bus.
2 x cP 44 Mec interconnected via the ePc bus will logically appear as one panel on the VikinX modular control bus.
customised Surface Designall buttons in use…
extra overlay ready for customising comes with every iP-based control Panel. The overlay has half stamped holes for the buttons, making it easy to customise.
example of customised panel
cSD (customised Surface Design) gives you a greater freedom in designing your specific user surface. With cSD you can remove keys that you find unnecessary, create functional blocks, as you need them and still get a professional looking panel.
SCk – Software Configurable keys
EPC – Expandable Panel Concept
CSd – Customised Surface design
network-electronics.com | 195
Modular control Panels 2.2
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
44 Software Configurable Buttons
CONtROL INtERFaCESethernet ports 1x 10/100base-T
connector rJ45
POWER SuPPLIES
ac range 90-254Vac, 50-60Hz, 10W
connector iec 320
Dc range 36-72VDc, 10W
unit Power Voltage +5V Dc
connector Db9 male
PHySICaL dImENSIONS
483x44x45 mm (19”, 1ru)
CP-44-mEC
• 44Softwareconfigurablemechanicalbuttons
16 Software Configurable LCd-Buttons
CONtROL INtERFaCESethernet ports 1x 10/100base-T
connector rJ45
POWER SuPPLIES
ac range 90-254Vac, 50-60Hz, 10W
connector iec 320
Dc range 36-72VDc, 10W
unit Power Voltage +5V Dc
connector Db9 male
PHySICaL dImENSIONS
483x44x45 mm (19”, 1ru)
CP-16LCd
•16softwareconfigurableLCDbuttons with 36x24 pixels
For all VikinX Modular control Panels:•Tri-colorbuttonillumination•Ethernetpanelbus•ExpandablePanelConcept(EPC)RS-232port•16GPIports/16GPOports
196 | network-electronics.com
Master Display Panel (CP-MDP)
Ethernet Ethernet
With preview
OptionalDA converter
Analogue video
Video Server(Moxa VPort 2110)
Ethernet
Preview7 pics per second
Control andpreview
vIdEO PREvIEW ON CONtROL PaNEL CP-mdP
The Master Display Panel (cP-MDP) includes a high resolution QVga
display screen where live video can be presented. “Signal presence”,
or confirmation of video content, can be presented with a frequency
of 7 pics per second.
Typical use for this application is preview before “Take”.
To enable video streaming to the MDP Panel, an external Video
Server is required. The Network electronics certified video server is a
Moxa VPort 2110.
Note: The video series is NOT provided by Network electronics.
master display Panel
CONtROL INtERFaCEScontrol interfaces
ethernet ports 1x 10/100base-T
connector rJ45
POWER SuPPLIESac range 90-254Vac, 50-60Hz, 10W
connector iec 320
Dc range 36-72VDc, 10W
unit Power Voltage +5V Dc
connector Db9 male
PHySICaL dImENSIONS483x44x45 mm (19”, 2ru)
CP-mdP-CL
•64softwareconfigurablebuttons•Easyexchangeablelabelling•320x240QVGAcolordisplay•CustomisedSurfaceDesign(CSD)option•Videopreview(optional)
Modular control Panels
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2.2
master display Panel
CONtROL INtERFaCEScontrol interfaces
ethernet ports 1x 10/100base-T
connector rJ45
POWER SuPPLIESac range 90-254Vac, 50-60Hz, 10W
connector iec 320
Dc range 36-72VDc, 10W
unit Power Voltage +5V Dc
connector Db9 male
PHySICaL dImENSIONS483x44x45 mm (19”, 2ru)
CP-mdP-BW
•64softwareconfigurablebuttons•Easyexchangeablelabelling•320x240QVGAb/wdisplay•CustomisedSurfaceDesign(CSD)option•Videopreview(optional)
network-electronics.com | 197
all VikinX Sublime control Panels:• Ethernet/RS-232/NCBcontrol• Programmable• Size:19inch–1RU,2RUor4RU–depth5cm
Sublime control Panels 2.2
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
multibus X-y Control Panel dualbus Control Panel
For router size: 16x2
Singlebus Control Panel
Optional gPi
Panel Router
1ru 16x16, 8x8
2ru 32x32
4ru 64x64
Panel Router
1ru 32x32, 16x16, 8x8
2ru 64x64
198 | network-electronics.com
Singlebus Control Panels
Sizes offered: 32 and 64•A/VBreakawayfunction•Audiofollowvideofuntion•Legendablebuttons•Panelenablefunction•Takefunction
compact control Panels
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2.2
CONtROL SyStEm• Upto50RoutersandControlPanelspersystem
• NetworkControlBusinallRoutersandCPs
• RS-232portinallRoutersandCPs
• De-centralizedcontrolarchitecture
• Local,independantsub-systems
• PC/IP/RemoteaccesspossibilitiesoverRS-232/Ethernet(viaETH-CON)
• Openprotocol;youmaywriteyourownsoftware
vIkINX COmPaCt CONtROL PaNELS, REFERENCE guIdERouter \ CP Singlebus multibus (X-y) CP-uNI gPI / tally
Joystick (w/CP)
VikinX.32 (1ru) remote (2ru) remote (1ru) remote (2ru) remote
VikinX.64 (2ru) remote (4ru) remote (1ru) remote (4ru) remote
caV8 / caV16 (1ru) remote remote / local (1ru) remote (1ru) remote
multibus X-y Control Panels
Sizes offered: 32x32 and 64x64 •A/VBreakawayfunction•Audiofollowvideofuntion•Legendablebuttons•Panelenablefunction•Takefunction
gPI/tally/Joystick Control Panels
Sizes offered: 32x32 and 64x64 •GPIorjoystickoperation•GPI-CPwithsinglebuspanel•Comprehensiveuseroptions•Tallyoutput
universal, multilevel Control Panels
•2x16characteralphanumericdisplay•8levelA/Vbreakawaycontrol•Panelenablefundtion
network-electronics.com | 199
VikinX System configurator 2.2
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
The system configurator is made to eliminate the obstacles installers and operators face when setting-up and configuring complex routing switcher solutions.
POWERFuL FEatuRESThe VikinX System configurator features include:
• UnifiedconfigurationtoolforVikinXModular,VikinXSublime,
eTH-cON & gYDa
• Easysystemset-upthroughsimpleWizardandDrag&Drop
menus
• Auto-detecttionofallhardwarewithlistinginmainmenu
• Interactivehelpmenu
ELImINatE tHE OBStaCLESThe VikinX System configurator is the company’s software tool
developed to eliminate the obstacles installers and operators face,
when setting-up and configuring complex routing switcher solutions.
advanced help menu whereever you are in the configuration process.
Selecting help will answer your questions related to your current
configuration area.
The manual is available as print-out.
FuLL tCP/IP INtERCONNECtIvItyVikinX is the only system available with full TcP/iP interconnectivity.
The VikinX router range minimises initial investment cost, and
operating expenses, resulting in very low cost of ownership.
guIdEd INStaLLatIONThe new VikinX System configurator provides wizards and convenient
drag & drop menus that comfortably guide the operator through the
installation process.
tHE mOSt COmPREHENSIvE aNd RELIaBLE ROutINg SWItCHER SOLutIONSTogether with Network electronics’ proven routing hardware VikinX
Modular and VikinX compact, plus the new VikinX Sublime range
of routing switchers, the new software solutions provide the most
comprehensive and reliable routing switcher solutions in the business.
200 | network-electronics.com
THOr
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
2.2
RS232
NetworkControl Bus
Ethernet
Ethernet
Ethernet
Ethernet
•Detectyourroutersystemautomatically
• Controlyourrouterswithdrag&dropinterface
• Lockandprotectyourcrosspoints
• Switchupto16virtuallevelssimultaneously
tHOR system requirements:
•WinNT,Win2000,WinXP
• IntelPentiumIII500MHz
• 128MBRAMand50MBharddiskspace
• SVGAvideoadapterandmonitor
FuNcTiONaliTY
CONTROL GUI Matrixview • • • •
Drag&Droproutercontrol • • •
VirtualRouterMapping(Multilevelcontrol) • • •
ConfigurableControlGUI •
TieLinesmanager •
CONTROL FEATURES Crosspointprotection(lock,protectandprohibit) • • • •
Salvos • • • •
Salvotimescheduling •
CategoriesandGroups • • •
Crosspointlogging • • •
COMMUNICATION FEATURES SingleComputertocompactrouters(RS-232) • • • •
Singlecomputertomodularrouters(TCP/IP) • • • •
MultiplecomputersonLAN • • •
RemotecomputeronLANormodem(PCtoPC) •
3rdpartyinterface(protocolconverting)(PCtodevice) •
CONFIGURATION FEATURES Routerconfiguration • • • •
Mnemonicsandicons • • • •
UserManagementwithlogin • • •
router size limitation 64x64 64x64 NO NO N.a.
THOR STANDARD EDITION
• No router size limitationIncludes: • Standard Edition• Multiple computers on LAN
THOR PREMIUM EDITION
• No router size limitation• Includes: Premium EditionTieLines Manager
THOR TIELINE EDITION
Control Functions
• Matrix Views
• Crosspoint Lock and Protection
• Salvo
Configuration
• Mnemonics and Icons
All editions have the following basic functions and configuration
possibilities:
Upgrade 1
• Router sizes up to 64x64
THOR BASIC EDITION
Upgrade 2
Upgrade 3
• Router sizes up to 64x64Includes:• Basic Edition• Drag & Drop Router Control• Categories and Groups• Crosspoint Logging• Virtual Router Mapping (Multilevel Switching)• User Management
baSic
STaNDarD
PreM
iuM
Tiel
iNe
FeaT
ure P
acK
THOr is the Windows-based router control system
for the VikinX router series
network-electronics.com | 201
THOr 2.2
ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg
eXTra FeaTureS
these features are available in tHOR if extra control guI or
communication are needed.
Some communication features need extra hardware (included in the
price).
CONtROL guI FEatuRES
Salvo Scheduler
COmmuNICatION FEatuRES
laN Multi user interface
ethernet interface to VikinX compact Hardware adapter
routers and VikinX Sublime (rS-232 to ethernet
converter) eTH-cON
3rd Party interface eTH-cON
advanced remote control
•PC(Modem)toPC(Modem)
•PC(Modem)toDeviceServer DeviceServer
G SaLvO SCHEduLER • Timedsalvotakeswithsalvoscheduler• Advancedreoccurrenceoptions
(hourly, daily, weekly and more)• Executemanysalvosinatimed
sequence with salvo sequence editor
Client ClientClient
THOR THORTHOR
MASTER
Client
THOR
G LaN muLtI uSER INtERFaCE (STaNDarD eDiTiON ONlY)• GraphicalEditorformakingcustom
design router control views• WindowsInternetExplorerHTML
based control interface
G EtHERNEt INtERFaCE tO vIkINX COmPaCt aNd vIkINX SuBLImE• DirectconnectionofaVikinX
compact and VikinX Sublime router with/without panel to ethernet
• Includeshardwareadapter• MoredetailsonETH-CON,seep.35
F 3Rd PaRty INtERFaCE• Wesupport3rd party interfaces
by protocol converting• IncludesETH-CONasprotocol
interface G advaNCEd REmOtE CONtROL Special router control solutions• PC(Modem)toPC(Modem),remote
THOr client, connect to Master Pc (must include laN Multiuser)
• PC(Modem)toDeviceServer,remoteserial port by modem connection
202 | network-electronics.com
aNalOg ViDeO aNalOg auDiO
cOMPONeNT aNalOg ViDeO
Network electronics’ compact VikinX routers embody the company’s
pioneering spirit by providing a ground-breaking price to
performance ratio in a feature-rich range.
The units’ unparalleled ultra-thin housing was designed to
accommodate facilities where real estate is at a premium.
configurations, ranging from 8 x 4 to 64 x 64, address every
application from broadcast to corporate to post-production.
Small and Medium-sized routers
ViKiNX cOMPacT
2.2
network-electronics.com | 203
Small and Medium-sized routers 2.2
ViKiNX cOMPacT
DigiTal ViDeO DigiTal auDiO
rS-422 DaTaTelecOM
POWER SuPPLyall VikinX compact Frame
routers are supplied with a single
desk-top power supply included
in the price.
PaRtItIONINg taBLE Router Size (square)
FORmat 64 32
composite Video 64x64 32x32
Y/c (SVHS) 32x32 16x16
rgb/YuV 21x21 10x10
rgb/sync 16x16 8x8
it is possible to reconfigure the switch groups
for all routers in the compact router line via
the configuration switch on the back-plane to
create several formats of routers.
204 | network-electronics.com
64x64
SPECIFICatIONSFrequency response 0-125MHz -3db
Differential gain typ. 0.08% (3.58/4.43MHz)
Differential phase typ. 0.08° (3.58/4.43MHz)
crosstalk < -60db (3.58/4.43MHz)
Video S/N ratio typ.70db
bar tilt < 0.1%
lum. non-linearity < 0.1%
impedance 75 ohm
return loss typ. 40db @ 10MHz
Max signal 2 Vp-p
ViT input 1Vpp, 300mV sync, 75ohm
Dc offset typ. < 15mV
Propagation delay 15ns ± 1ns
coupling Dc
connector bNc
ac power external power supply 100–260 Vac
Dc power ±5V, connector Db9 male
Dimensions 483x264x100 mm (19”, 6ru)
v6464
32x32
SPECIFICatIONSFrequency response 0-125MHz -3db
Differential gain typ. 0.06% (3.58/4.43MHz)
Differential phase typ. 0.06° (3.58/4.43MHz)
crosstalk < -60db (3.58/4.43MHz)
Video S/N ratio typ.70db
bar tilt < 0.1%
lum. non-linearity < 0.1%
impedance 75 ohm
return loss typ. 40db @ 10MHz
Max signal 2 Vp-p
ViT input 1Vpp, 300mV sync, 75ohm
Dc offset typ. < 15mV
Propagation delay 9ns ± 1ns
coupling Dc
connector bNc
ac power external power supply 100–260 Vac
Dc power ±5V, connector Db9 male
Dimensions 483x132x100 mm (19”, 3ru)
v3232
analog Video
ViKiNX cOMPacT
2.2
•Powerdownmemory•RS-232Interface•NetworkControlBus
•Powerdownmemory•RS-232Interface•NetworkControlBus
network-electronics.com | 205
analog audio 2.2
ViKiNX cOMPacT
64x64
SPECIFICatIONSFrequency response 20Hz-100kHz ± 0.1db
crosstalk > -100db
clicknoise typ. <50dbu
THD+N < 0.005%
SNr > 90db ref. to 0db 20Hz-20kHz
Number of inputs 64 (Stereo) electronically balanced
input impedance >10 kohm Max input level +23dbu
cMrr >75db
Max. input level + 23dbu
Number of outputs 64 (Stereo) electronically balanced
Output impedance 66 ohm
audio connector Db25 female
ac power external power supply 100–260 Vac
Dc power ±15V, connector Db9 male
Dimensions 483x264x100 mm (19”, 6ru)
a6464
32x32
SPECIFICatIONSFrequency response 20Hz-100kHz ±0.1db
crosstalk > -100db
clicknoise < 60dbu
THD+N < 0.005%
SNr > 90db ref. to 0db 20Hz-20kHz
Number of inputs 32 (Stereo) electronically balanced
input impedance > 10kohm
Max input level + 23dbu
cMrr > 75db
Number of outputs 32 (Stereo) electronically balanced
Output impedance 66 ohm
audio connector Db25 female
ac power external power supply 100–260 Vac
Dc power ±15V, connector Db9 male
Dimensions 483x132x100 mm (19”, 3ru)
a3232
a6464 is also available as mono. This unit is called a6464 Mono.
•100kHzAudioBandwidth•Powerdownmemory•Programmableformat•RS-232Interface•NetworkControlBus•AlsousableasTimeCoderouter
•100kHzAudioBandwidth•Powerdownmemory•Programmableformat•RS-232Interface•NetworkControlBus•AlsousableasTimeCoderouter
206 | network-electronics.com
cOMPONeNT aNalOg ViDeO
component analog Video
ViKiNX cOMPacT
2.2
if our routers were any thinnerWe could ship them in envelopes
everything you want in a compact
feature-rich design, including:
• Seamlesstri-stepswitching
• Externalcontrolsystemcompatibility
• Typ.0–110/130MHz/-3dB@0dBminputsignal
• Audiobreakawaypossible
• Upto1600x1200resolution
• Built-inRS-232interface
• Built-inprofessionalcontrolpanel
available in configurations of rgbHV, plus stereo analog audio.
Sizes include 16x16, 16x8, 8x8, 8x4.
CONFIguRatIONSThe following formats may be configured (analog stereo audio and
built-in control panel are both optional):
16x16 rgbHV + aa + cP
16x8 rgbHV + aa + cP
8x8 rgbHV + aa + cP
8x4 rgbHV + aa + cP
network-electronics.com | 207
component analog Video 2.2
ViKiNX cOMPacT
8x8 / 8x4
vIdEO SPECIFICatIONS Frequency response typical 0–110MHz / -3db @ 0dbm input
signal
Number of inputs 8
Number of outputs 8 or 4, depending on model
audIO SPECIFICatIONS (OPtIONaL)
Number of inputs 8 (Stereo), true balanced
Number of outputs 8 or 4 (Stereo), depending on model, all true balanced
gENERaL
Max. power consumption <20W
Dimensions 483x132x35 mm (19”, 3ru)
Cav0808 / Cav0804
vIdEO SPECIFICatIONS Frequency response typical 0–130MHz / -3db @ 0dbm input
signal
Number of inputs 16
Number of outputs 16 or 8, depending on model
audIO SPECIFICatIONS (OPtIONaL)
Number of inputs 16 (Stereo), true balanced
Number of outputs 16 or 8 (Stereo), depending on model, all true balanced
gENERaL
Max. power consumption <40W
Dimensions 483x264x35 mm (19”, 6ru)
Cav1616 / Cav1608
16x16 / 16x8
vIdEO SPECIFICatIONS Differential gain typical 0.1% (3.58/4.43MHz)
Differential phase typical 0.2° (3.58/4.43MHz)
crosstalk < -55db (3.58/4.43MHz)
Video S/N ratio typical 70db
bar tilt < 0.1%
lum. Non-linearity < 0.1%
impedance 75 ohm
return loss typical 38db
Max signal 2 Vp-p
coupling Dc
Dc offset typ. 5mV
Propagation delay 5ns ± 1ns
connector bNc
Switching Seamless w/variable delay 2-5s, or ViT, selectable via DiP-switches. Pal/NTSc selection on DiP-switches. ViT loop
audIO SPECIFICatIONS (OPtIONaL)Frequency response 20Hz-100kHz ± 0.1db
crosstalk > -100db
click noise < 60dbu
THD+N < 0.003%
SNr > 100db ref. to 0db 20Hz-20kHz
input impedance > 10k ohm
cMrr > 75db
Max. input level + 25dbu
Output impedance 66 ohm
connector Db25 female
PaNEL SPECIFICatIONS (OPtIONaL)Salvos Programmable/executable on panel
gENERaLac Power external power supplies 100 – 260 Vac
Dc Power ±15V, connector Db9 male, equipped with 2x Db9 connectors
Cav0808 / Cav0804 / Cav1616 / Cav1608:
208 | network-electronics.com
64x64
SPECIFICatIONSData rate NrZ 143Mbps–540Mbps
ViT input comp. Video 1Vpp, 300mV sync, 75ohm
equalization automatic up to 300m (belden 8281)
impedance 75 ohm
return loss in/out > 18db (10MHz–270MHz)
Signal level nom. 800mV
rise/fall time typ. 700ps
connector bNc
ac power external power supply 100–260 Vac
Dc power +5V, connector Db9 male
Dimensions 483x264x100 mm (19”, 6ru)
vd6464
32x32
SPECIFICatIONSData rate NrZ 143Mbps–540Mbps
ViT input comp. Video 1Vpp, 300mV sync, looped, 75ohm
equalization automatic up to 300m (belden 8281)
impedance 75 ohm
return loss in/out > 18db (10MHz–270MHz)
Signal level nom. 800mV
rise/fall time typ. 700ps
connector bNc
ac power external power supply 100–260 Vac
Dc power +5V, connector Db9 male
Dimensions 483x132x100 mm (19”, 3ru)
vd3232
SD Digital Video
ViKiNX cOMPacT
2.2
•D14:2:2270MbpsComponent•143MbpsNTSCComposite•D2177MbpsPALComposite•Upto540MbpsDatarate•InputEqualization•NetworkControlBus•Powerdownmemory•RS-232Interface•DVB-ASIcompatible
•D14:2:2270MbpsComponent•143MbpsNTSCComposite•D2177MbpsPALComposite•Upto540MbpsDatarate•InputEqualization•NetworkControlBus•Powerdownmemory•RS-232Interface•DVB-ASIcompatible
network-electronics.com | 209
Digital audio 2.2
ViKiNX cOMPacT
64x64
SPECIFICatIONSSignal type aeS/ebu digital audio
Number of inputs 64 transformer balanced
input impedance 110 ohm
Number of outputs 64 transformer balanced
Output impedance 110 ohm
Jitter 800ps
Delay 170ns
Signal level 0.2 – 7Vpp
Sampling rates 32 – 96kHz
Switching mode asynchronous
audio connector Db25 female
ac power external power supply 100 or 260 Vac
Dc power +5V, connector Db9 male
Dimensions 483x132x100 mm (19”, 3ru)
ad6464-110
32x32
SPECIFICatIONSSignal type aeS/ebu digital audio
Number of inputs 32 transformer balanced
input impedance 110 ohm
Number of outputs 32 transformer balanced
Output impedance 110 ohm
Jitter 800ps
Delay 170ns
Signal level 0.2 – 7Vpp
Sampling rates 32 – 96kHz
Switching mode asynchronous
audio connector Db25 female
ac power external power supply 100 or 260 Vac
Dc power +5V, connector Db9 male
Dimensions 483x132x100 mm (19”, 3ru)
ad3232-110
also available as unbalanced 75 ohm(aD6464-75)
also available as unbalanced 75 ohm(aD3232-75)
• 110ohmbalancedin-andoutputs• 96kHzcompatible• Samplingrates32–96kHz• PowerDownMemory• Programmableformat•NetworkControlBus• RS-232Interface
• 110ohmbalancedin-andoutputs• 96kHzcompatible• Samplingrates32–96kHz• PowerDownMemory• Programmableformat•NetworkControlBus• RS-232Interface
210 | network-electronics.com
64x64
SPECIFICatIONSData rate 34Mbps – 45Mbps g.703 HDb3
equalization automatic, up to 200m (belden 8281)
impedance 75 ohm
re-clocking On outputs
return loss > 16db (10MHz–270MHz)
Signal level 1000 mV fixed, 75 ohm load
connector bNc
ac Power external power supplies 100–260 Vac
Dc Power ±5V, connector Db9 male
Max power consumption < 17.5W
Dimensions 483x616x120 mm (19”, 14ru)
t6464-34/45
32x32
SPECIFICatIONSData rate 34Mbps–45Mbps g.703 HDb3
equalization automatic up to 200m (belden 8281)
re-clocking on outputs
impedance 75 ohm
return-loss > 16db
Signal level 1000mV fixed on 75 ohm load
connector bNc
ac power external power supply 100–260 Vac
Power option 24–72V Dc
Dc power ±5V, connector Db9 male
Dimensions 483x308x100 mm (19”, 7ru)
t3232-34/45
•34Mbpsor45MbpsDatarate•InputEqualization•Output-Reclocking•MeetsITU-TG.703forHDB3signals•RS-232Interface•NetworkControlBus
Telecom
ViKiNX cOMPacT
2.2
•InputEqualization•NetworkControlBus•RS-232Interface
•InputEqualization•NetworkControlBus•RS-232Interface
network-electronics.com | 211
Telecom 2.2
ViKiNX cOMPacT
•InputEqualization•NetworkControlBus•RS-232Interface
•InputEqualization•NetworkControlBus•RS-232Interface
64x64
SPECIFICatIONSData rate 140Mbps – 155Mbps g.703 cMi
equalization automatic, up to 200m (belden 8281)
impedance 75 ohm
return loss > 16db (10MHz – 270MHz)
Signal level 1000 mV fixed, 75 ohm load
connector bNc
ac Power external power supplies 100–260 Vac
Dc Power +5V, 2 pin Molex connector
Max power consumption < 80W
Dimensions 483x264x120 mm (19”, 6ru)
t6464-140/155
32x32
SPECIFICatIONSData rate 140Mbps–155Mbps g.703 cMi
equalization automatic up to 200m (belden 8281)
impedance 75 ohm
return-loss > 16db
Signal level 1000mV fixed on 75 ohm load
connector bNc
ac power external power supply 100–260 Vac
Power option 24–72V Dc
Dc power +5V, connector Db9 male
Dimensions 483x132x100 mm (19”, 3ru)
t3232-140/155
•140Mbpsor155MbpsDatarate•InputEqualization•Non-Reclocking•MeetsITU-TG.703forCMIsignals•RS-232Interface•NetworkControlBus
212 | network-electronics.com
•Machineandeditcontrol•Stateoftheartquality•Powerdownmemory•Forproductionsystems•RS-232Interface•NetworkControlBus
rS-422 Data
ViKiNX cOMPacT
2.2
32x32
SPECIFICatIONSData rate 5Mbps
connector Db9 female
ac Power external power supply 100–260Vac
Dc Power +5V, connector Db9 male
Dimensions 483x220x35 mm (19”, 5ru)
d3232
network-electronics.com | 213
2.2
214 | network-electronics.com
VikinX accessories
ViKiNX acceSSOrieS
2.2
all Network electronics products have a single desktop power supply
included in the unit price. below you will find some options for single
or redundant power supply in 19”-2ru.
19”-2ru power supply frame can be equipped with up to 4
Motherboards, where each Motherboard can house up to 2 power
supplies (single or redundant) of all VikinX equipment (routers,
amplifiers, converters) up to the VikinX.32 router Family, as well as
aD6464-110 and a6464 Mono. For a6464 Stereo, please specify
PSu’s for each Mono frame!
each motherboards have 5 Dc power outlets. gPi alarm per power
supply included. each power supply gives 60W. autosensing
100-240Vac.
Please call for 48V Dc solutions.
Note that all routers and control panels are supplied with single
desktop power supply as standard.
PWr-ac15/15/5/5V
Order no. description:Fr-PWr-1S Frame, 1 x Motherboard and 1 x Power Supply,
handles up to 5 VikinX devices
Fr-PWr-1r Frame, 1 x Motherboard and 2 x Power Supplies, handles up to 5 VikinX devices
Fr-PWr-2S Frame, 2 x Motherboards and 2 x Power Supplies, handles up to 10 VikinX devices
Fr-PWr-2r Frame, 2 x Motherboards and 4 x Power Supplies, handles up to 10 VikinX devices
Fr-PWr-3S Frame, 3 x Motherboards and 3 x Power Supplies, handles up to 15 VikinX devices
Fr-PWr-3r Frame, 3 x Motherboards and 6 x Power Supplies, handles up to 15 VikinX devices
Fr-PWr-4S Frame, 4 x Motherboards and 4 x Power Supplies, handles up to 20 VikinX devices
Fr-PWr-4r Frame, 4 x Motherboards and 8 x Power Supplies, handles up to 20 VikinX devices
Specify Power cables (quantity of each type) when ordering Fr-PWr-xx. See below.
Power Cables for FR-PWR-xx Dc-Dc-+/-5V cable, 1,5m (5 ft.), interconnects
Fr-PWr-xx and VikinX devices +/-5V Typical products: ViDeO
Dc-Dc-+/-15V cable, 1,5m (5 ft.), interconnects Fr-PWr-xx and VikinX devices +/-15V Typical products: auDiO
Fr-PWr-2r-V rack mount redundant PSu solution for V6464 and aD-6464-75. Frame, 2 x Motherboards and 4 x Power Supplies, incl. dedicated Dc/Dc PSu-router cable
Fr-PWr-3r-VD rack mount redundant PSu solution for VD6464. Frame, 3 x Motherboards and 6 x Power Supplies, incl. dedicated Dc/Dc PSu-router cable
uPgRadE aNd SPaRE PaRtS mOduLES
Power Supply module for FR-PWR-xx
PWr-ac Power supply with 2 x 15V and 2 x 5V, 60W, 15/15/5/5V input 110-260Vac auto-sensing, for spare or redundant supply
PWr-Dc Power supply with 2 x 15V and 2 x 5V, 60W, input 15/15/5/5V 36-72VDc, for spare or redundant supply
BaCkPLaNE FOR POWER SuPPLy mOduLES FOR FR-PWR-XX bcK-Pl backplane for Power Supply Modules for Fr-
PWr-xx, can hold 2 x PSu modules
FaN Fr-Fan-1ru Fan for ventilation, 1 ru. Please call for further
instructions.
network-electronics.com | 215
VikinX accessories 2.2
ViKiNX acceSSOrieS
aCCESSORIESY-cable, for redundant power
a necessary item to combine two power supplies for redundancy
TOOl-KiT rJ45-Ncb connector Matchbox (adapter) between rJ45 and Ncb (Network control bus), incl. 2 x Ncb 0.3 and 2 x rJ45-rJ45-0.3
rJ45-Ncb-aDP connector Matchbox (adapter) between rJ45 and Ncb (Network control bus)
Db25Pin adaptor Small print-card with Db25 to screw-terminal
NCB-BuS CaBLE INCL. CONNECtORS
Ncb-0,3 Ncb (Network control bus) 0.3 meter cable
Ncb-1,5 Ncb (Network control bus) 1.5 meter cable
Ncb-3,0 Ncb (Network control bus) 3.0 meter cable
Ncb-7,5 Ncb (Network control bus) 7.5 meter cable
Ncb-15 Ncb (Network control bus) 15 meter cable
Ncb-25 Ncb (Network control bus) 25 meter cable
Ncb-50 Ncb (Network control bus) 50 meter cable
Ncb-xx Ncb (Network control bus) longer lengths
audIO dB25 tO XLR
3m x XlrF-25pin Network Db25pin audio contact to 8 x XlrF (Female), 3 meter cable
3m x XlrM-25pin Network Db25pin audio contact to 8 x XlrF (Male), 3 meter cable
dESktOP POWER SuPPLy uNItS (PSu)NumBER ItEm dESCRIPtION
aC dESktOP POWER FOR vIkINX SuBLImE
12876 Sl-PWr-90 For Sl-HD6464-r/-cP, Sl-SD6464-r/-cP, Sl-a6464/-cP , Sl-a3232/-cP, Sl-V6464/-cP
12450 Sl-PWr-40 For all other Sublime routers
aC dESktOP POWER FOR vIkINX COmPaCt
12450 Sl-PWr-40 For a3232, a6464 Mono a6464 (1 router requires 2 units. Must be ordered separately)
16675 DP ac +/-5V / 35W For aD3232-75, aD3232-110, aD6464-75, aD6464-110
12450 Sl-PWr-40 For caV0804, caV0808, caV1608, caV1616, incl. Variants
16675 DP ac +/-5V / 35W For D3232
16675 DP ac +/-5V / 35W For recl8
16675 DP ac +/-5V / 35W For T3232-140/155, T3232-34/45, T6464-34/45
11082 DP ac +5V / 110W For T6464-140/155 (For redundant power, choose Fr-PWr-3r-VD)
16675 DP ac +/-5V / 35W For V3232, V6464
16675 DP ac +/-5V / 35W For VD3232
11082 DP ac +5V / 110W For VD6464 (For redundant power, choose Fr-PWr-3r-VD)
aC dESktOP POWER FOR CONtROL PaNELS
12450 Sl-PWr-40 For Sublime Panels
16675 DP ac +/-5V / 35W For iP Panels
11079 DP ac +/-5V / 10W For compact Panels
aC dESktOP POWER FOR 1 Ru FLaSHLINk COmPaCt dIStRIButION amPLIFIERS
11084 DP ac +/-15V / 10W For aV0110, a0108DS
11079 DP ac +/-5V / 10W For aD0108Q, V0106Q, V0106DeQ, SDi0106Q
aC dESktOP POWER FOR N-BOX
11084 DP ac +/-15V / 10W For N-bOX (or use Sl-PWr-40!)
dC dESktOP POWER FOR vIkINX COmPaCt
11081 DP Dc +/-15V / 30W For a3232, a6464 Mono a6464 (1 router requires 2 units. Must be ordered separately)
11080 DP Dc +/-5V / 30W For aD3232-75, aD3232-110, aD6464-75, aD6464-110
11081 DP Dc +/-15V / 30W For caV0804, caV0808, caV1608, caV1616, incl. Variants
11080 DP Dc +/-5V / 30W For D3232
11080 DP Dc +/-5V / 30W For recl8
11080 DP Dc +/-5V / 30W For T3232-140/155, T3232-34/45, T6464-34/45
11080 DP Dc +/-5V / 30W For V3232, V6464 (For redundant power, choose Fr-PWr-2r-V)
11080 DP Dc +/-5V / 30W For VD3232
dC dESktOP POWER FOR CONtROL PaNELS
11081 DP Dc +/-15V / 30W For Sublime Panels
11080 DP Dc +/-5V / 30W For iP Panels
11080 DP Dc +/-5V / 30W For compact Panels
dC dESktOP POWER FOR 1 Ru FLaSHLINk COmPaCt dIStRIButION amPLIFIERS
11081 DP Dc +/-15V / 30W For aV0110, a0108DS
11080 DP Dc +/-5V / 30W For aD0108Q, V0106Q, V0106DeQ, SDi0106Q
dC dESktOP POWER FOR N-BOX
11081 DP Dc +/-15V / 30W For N-bOX
216 | network-electronics.com
Netcare
NeTcare SerViceS
2.3
NeTcare is the name of the technical support
activities offered by Network electronics, for services
on the purchased products.
NeTcare covers:
•CommissioningandConfigurationAssistance
•ServiceandSupport
•Producttraining
Note: Network electronics offers
•3-yearstandardwarrantyonhardwareproducts
from Network electronics
•2-yearstandardwarrantyonthesoftwareproducts
from Network electronics
For “general conditions for Sales” and “limited
Warranty” visit www.network-electronics.com
all details in this catalog are given information and
shall not form part of any contract. all technical
information is subject to be changed without notice.
Network Electronics ASP.O. Box 1020, 3204 Sandefjord, NorwayTel: +47 33 48 99 99 Fax: +47 33 48 99 98
Video Products Group, Inc.1600 Emerson Avenue, Oxnard, CA 93033, USATel: +1 (805) 247-8560 Fax: +1 (805) 247-8561
Gra
phi
c de
sign
: Cha
rlott
e.no
• P
rint:
BK
grafi
sk, S
ande
fjord
/Nor
way
network-electronics.com • vpginc.com
The Global Video Transport Leader