AC Motors Selection and Pricing GuideCatalog D81.2, U.S./Canada
2009 2010 Catalog D81.2, U.S./Canada 2009 - 2010
NEMA and IEC MotorsAnswers for Industry.
The worlds most efficient line of low voltage AC motors.Siemens
NEMA and IEC motors are designed to provide maximum durability,
performance, efficiency, reliability, and availability.
Table of ContentsIntroductionTable of Contents
.......................................................................................................................................................
1-1 Disclaimer
..................................................................................................................................................................
1-5 NEMA Motor Features at a
Glance...............................................................................................................................
1-6 IEC Motor Features at a Glance
.................................................................................................................................
1-10 Wide Selection of Motors
..........................................................................................................................................
1-12 Cancellation Charges & Change Notices
....................................................................................................................
1-13 Warranty Procedure
..................................................................................................................................................
1-14
General Purpose MotorsGP10A
........................................................................................................................................................................2-1
High Efciency (Cast Aluminum Frame) Horizontal, Foot Mounted
......................................................................................................................2-2
C-Face, Horizontal, Foot Mounted
..........................................................................................................2-3
C-Face, Horizontal,
Footless....................................................................................................................2-5
GP10
...........................................................................................................................................................................2-7
High Efciency (Cast Iron Frame) Horizontal, Foot Mounted
......................................................................................................................2-8
C-Face, Horizontal, Foot Mounted
........................................................................................................2-12
C-Face, Horizontal,
Footless..................................................................................................................2-13
RGZP
.........................................................................................................................................................................2-15
High Efciency (Cast Iron Frame) Horizontal, Foot Mounted
....................................................................................................................2-16
GP100A
.....................................................................................................................................................................2-18
NEMA Premium Efciency (Cast Aluminum Frame/Aluminum Rotor)
Horizontal, Foot Mounted
....................................................................................................................2-19
NEMA Premium Efciency Plus (Cast Aluminum Frame/Copper Rotor)
Horizontal, Foot Mounted
....................................................................................................................2-21
GP100
.......................................................................................................................................................................2-22
NEMA Premium Efciency (Cast Iron Frame/Aluminum Rotor) Horizontal,
Foot Mounted
....................................................................................................................2-23
C-Face, Horizontal,
Footless..................................................................................................................2-24
NEMA Premium Efciency Plus (Cast Iron Frame/Copper Rotor)
Horizontal, Foot Mounted
....................................................................................................................2-26
C-Face, Horizontal,
Footless..................................................................................................................2-27
QuikMOD (GP Motors)
...............................................................................................................................................2-28
QuikMOD (RGZP Motors)
...........................................................................................................................................2-31
Custom Options (GP Motors)
.....................................................................................................................................2-33
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-1
Table of ContentsIntroductionTable of Contents
.......................................................................................................................................................
1-1 Disclaimer
..................................................................................................................................................................
1-5 NEMA Motor Features at a
Glance...............................................................................................................................
1-6 IEC Motor Features at a Glance
.................................................................................................................................
1-10 Wide Selection of Motors
..........................................................................................................................................
1-12 Cancellation Charges & Change Notices
....................................................................................................................
1-13 Warranty Procedure
..................................................................................................................................................
1-14
General Purpose MotorsGP10A
........................................................................................................................................................................2-1
High Efciency (Cast Aluminum Frame) Horizontal, Foot Mounted
......................................................................................................................2-2
C-Face, Horizontal, Foot Mounted
..........................................................................................................2-3
C-Face, Horizontal,
Footless....................................................................................................................2-5
GP10
...........................................................................................................................................................................2-7
High Efciency (Cast Iron Frame) Horizontal, Foot Mounted
......................................................................................................................2-8
C-Face, Horizontal, Foot Mounted
........................................................................................................2-12
C-Face, Horizontal,
Footless..................................................................................................................2-13
RGZP
.........................................................................................................................................................................2-15
High Efciency (Cast Iron Frame) Horizontal, Foot Mounted
....................................................................................................................2-16
GP100A
.....................................................................................................................................................................2-18
NEMA Premium Efciency (Cast Aluminum Frame/Aluminum Rotor)
Horizontal, Foot Mounted
....................................................................................................................2-19
NEMA Premium Efciency Plus (Cast Aluminum Frame/Copper Rotor)
Horizontal, Foot Mounted
....................................................................................................................2-21
GP100
.......................................................................................................................................................................2-22
NEMA Premium Efciency (Cast Iron Frame/Aluminum Rotor) Horizontal,
Foot Mounted
....................................................................................................................2-23
C-Face, Horizontal,
Footless..................................................................................................................2-24
NEMA Premium Efciency Plus (Cast Iron Frame/Copper Rotor)
Horizontal, Foot Mounted
....................................................................................................................2-26
C-Face, Horizontal,
Footless..................................................................................................................2-27
QuikMOD (GP Motors)
...............................................................................................................................................2-28
QuikMOD (RGZP Motors)
...........................................................................................................................................2-31
Custom Options (GP Motors)
.....................................................................................................................................2-33
Severe Duty MotorsSD10
...........................................................................................................................................................................3-1
High Efciency Horizontal, Foot Mounted
......................................................................................................................3-2
C-Face, Horizontal,
Footless....................................................................................................................3-8
RGZESD
.....................................................................................................................................................................3-10
1-2
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Table of ContentsHigh Efciency Horizontal, Foot Mounted
....................................................................................................................3-11
SD10 MS
...................................................................................................................................................................3-15
High Efciency (1 Winding Variable Torque) Horizontal, Foot Mounted
....................................................................................................................3-16
SD100
.......................................................................................................................................................................3-18
NEMA Premium Efciency (Aluminum Rotor) Horizontal, Foot Mounted
....................................................................................................................3-19
C-Face, Horizontal,
Footless..................................................................................................................3-23
NEMA Premium Efciency Plus (Copper Rotor) Horizontal, Foot Mounted
................................................................................................................
3-25 C-Face, Horizontal, Footless
.............................................................................................................
3-26 RGZEESD
..............................................................................................................................................................
3-27 NEMA Premium Efciency Horizontal, Foot Mounted
................................................................................................................
3-28 SD100 IEEE841
....................................................................................................................................................
3-33 NEMA Premium Efciency (Aluminum Rotor) Horizontal, Foot
Mounted
................................................................................................................
3-34 NEMA Premium Efciency Plus (Copper Rotor) Horizontal, Foot
Mounted
................................................................................................................
3-41 RGZEESDX
............................................................................................................................................................
3-42 NEMA Premium Efciency Horizontal, Foot Mounted
................................................................................................................
3-43 QuikMOD (SD Motors)
..........................................................................................................................................
3-48 QuikMOD (RGZ Motors)
........................................................................................................................................
3-51 Custom Options (SD Motors)
................................................................................................................................
3-54
Hazardous DutyRGZZESD
................................................................................................................................................................
4-1 Class I, Group D, Class II, Groups F & G, Division 1
Horizontal, Foot Mounted
..................................................................................................................
4-2 C-Face, Vertical with Drip Cover, Footless
...........................................................................................
4-6 RGZZESD ID1
..........................................................................................................................................................
4-7 Class I, Group D, Division 1 T2A, 1.15SF Horizontal, Foot
Mounted
..................................................................................................................
4-8 C-Face, Vertical with Drip Cover, Footless
.........................................................................................
4-10 QuikMOD (XP Motors)
..........................................................................................................................................
4-11 Custom Options (XP Motors)
................................................................................................................................
4-13
Inverter DutyRGZESDI
.................................................................................................................................................................
5-1 10:1 Constant Torque Horizontal, Foot Mounted
..................................................................................................................
5-2 RGKESDI &
RGZESDI................................................................................................................................................
5-4 1000:1 Constant Torque Horizontal, Foot Mounted
..................................................................................................................
5-5 RGZZESDI
...............................................................................................................................................................
5-7 Class I, Group D, Class II, Groups F & G, Division 1
Horizontal, Foot Mounted
..................................................................................................................
5-8 QuikMOD (Inverter
Duty)......................................................................................................................................
5-10
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-3
Table of ContentsCustom Options (Inverter Duty)
............................................................................................................................
5-12
Denite PurposeVertical Solid Shaft Normal Thrust
RGZVESD................................................................................................................................................................
6-1 RGZZVESD
..............................................................................................................................................................
6-4 Class I, Group D, Division 1
..........................................................................................................................
6-5 Vertical Solid Shaft In Line Thrust RGZVILESD
.............................................................................................................................................................
6-7 RGZZVILESD
...........................................................................................................................................................
6-9 Class I, Group D, Division 1
........................................................................................................................
6-10 QuikMOD (Vertical
Motors)...................................................................................................................................
6-11 Custom Options (Vertical Motors)
.........................................................................................................................
6-13
IEC Standard Motors1LA7
......................................................................................................................................................................
7-1 Standard Efciency (Cast Aluminum Frame) B3 - Foot
Mounted.............................................................................................................................
7-2 B3 - Foot Mounted and PTC (A11)
......................................................................................................
7-4 B5 - Flange, Footless (w/o canopy)
.....................................................................................................
7-6 B14 - Flange, Footless (w/o canopy)
...................................................................................................
7-8 1LA6
....................................................................................................................................................................
7-10 Standard Efciency (Cast Iron Frame) B3 - Foot
Mounted...........................................................................................................................
7-11 1LA9
....................................................................................................................................................................
7-12 High Efciency (Cast Aluminum Frame) B3 - Foot
Mounted...........................................................................................................................
7-13 B3 - Foot Mounted and PTC (A11)
....................................................................................................
7-14 B5 - Flange, Footless (w/o canopy)
...................................................................................................
7-15 B14 - Flange, Footless (w/o canopy)
.................................................................................................
7-16 1LG6
....................................................................................................................................................................
7-17 High Efciency (Cast Iron Frame) B3 - Foot
Mounted...........................................................................................................................
7-18 B3 - Foot Mounted and PTC (A11)
....................................................................................................
7-19 Custom Options (IEC Standard Motors)
.................................................................................................................
7-20 IEC EX Motors
........................................................................................................................................................................
7-24 1MJ6 Explosion Proof B3 - Foot
Mounted...........................................................................................................................
7-25 1MJ7 Explosion Proof B3 - Foot
Mounted...........................................................................................................................
7-27 Custom Options (IEC Explosion Proof Motors)
.......................................................................................................
7-28
QuikMOD DetailQuikMOD Introduction
...........................................................................................................................................
8-1 QuikMOD
Overview................................................................................................................................................
8-4 QuikMOD Details
....................................................................................................................................................
8-8 Accessories
..........................................................................................................................................................
8-101-4 2009-2010 Low Voltage AC Motors Selection and Pricing
Guide
Table of ContentsCustom Options DetailCustom Options
Introduction..................................................................................................................................
9-1 Custom Options Overview
......................................................................................................................................
9-2 Custom Options Details
..........................................................................................................................................
9-8
Typical Performance DataTechnical Notes
....................................................................................................................................................
10-1 General Purpose & Severe Duty High Efciency GP10A / GP10 /
SD10
.......................................................................................................................
10-2 NEMA Premium Efciency (Aluminum Rotor) GP100A, GP100, SD100,
SD100 IEEE841
.........................................................................................
10-4 NEMA Premium Efciency Plus (Copper Rotor) GP100A, GP100,
SD100, SD100 IEEE841
.........................................................................................
10-6 Severe Duty Multi-Speed SD10 MS
...................................................................................................................................................
10-9 Hazardous & Inverter Duty RGZZESD, RGZZESD ID1, RGZZESDI
..........................................................................................................
10-10 Inverter Duty RGZESDI 10:1 Constant Torque
.............................................................................................................
10-14 RGKESDI & RGZESDI 1000:1 Constant Torque
........................................................................................
10-16 Denite Purpose Vertical Motors RGZVESD, RGZVILESD
..............................................................................................................................
10-18 1LA7 400V 50Hz Data
......................................................................................................................................
10-20 1LA6 400V 50Hz Data
......................................................................................................................................
10-22 1LA9 400V 50Hz Data
......................................................................................................................................
10-23 460V 60Hz Data
......................................................................................................................................
10-24 1LG6 400V 50Hz Data
......................................................................................................................................
10-25 460V 60Hz Data
......................................................................................................................................
10-27 1MJ6 400V 50Hz Data
......................................................................................................................................
10-28 1MJ7 400V 50Hz Data
......................................................................................................................................
10-30 GP10A-GP100A 140-250
......................................................................................................................................
11-1 GP10
140-440......................................................................................................................................................
11-4 GP100
140-250..................................................................................................................................................
11-10 SD10 140-S440
..................................................................................................................................................
11-12 SD100 140-S440
................................................................................................................................................
11-18 SD100 IEEE841
280-S440...................................................................................................................................
11-24 RGZP-RGZESD-RGZZESD
......................................................................................................................................
11-32 RGZ(Z)ESDI Fig A TEFC
.....................................................................................................................................
11-34 RGZESDI Fig B TEBC with and without Encoder
.................................................................................................
11-35 RGZESDI Fig C & D Lake Shore LS56 & Internally
Mounted Encoder
...................................................................
11-36 RGZESDI Fig E Dynapar HS35 Encoder
..............................................................................................................
11-37 RGZESDI Fig F Lake Shore 8500 Externally Mounted Encoder
............................................................................
11-38
RGZV(IL)ESD.......................................................................................................................................................
11-39 V-Belt Sheave Diagram
.......................................................................................................................................
11-40 Conduit Boxes
....................................................................................................................................................
11-41 1LA7
..................................................................................................................................................................
11-48
Dimensions
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-5
Siemens NEMA Three Phase Integral Horse Power MotorsFeatures at
a GlanceGeneral Purpose MotorsGP10ASee Page 2-1
GP10See Page 2-7
GP100ASee Page 2-18
GP100See Page 2-22
Enclosure Efciency Thrust HP Range Frame Size
General Purpose - TEFC High N/A 1-20 140-250 60 Hertz 3 - Phase
208-230/460 & 575
General Purpose - TEFC High N/A 1-200 140-440 60 Hertz 3 -
Phase
General Purpose - TEFC NEMA Premium / NEMA Premium Plus N/A 1-20
140-250 60 Hertz 3 - Phase
General Purpose - TEFC NEMA Premium / NEMA Premium Plus N/A 1-20
140-250 60 Hertz 3 - Phase 208-230/460 & 575
Electrical Data
Frequency Power Voltage
Service Factor (sine wave) Electrical Design Stator Windings
Insulation
1.15 NEMA design B Copper - Random Wound Class F Meets NEMA
MG1-2006, Part 31 Class B @ 1.0SF, Class F @ 1.15SF 18 Months Cast
aluminum with bolted feet Cast aluminum Cast aluminum Neoprene
(o-rings) Plastic Bi-directional - polypropylene N/A Die cast
aluminum High strength carbon steel (C1045) Double for life Sealed
Shielded
208-230/460 & 575 20HP 208-230/460 & 575 20HP <
230/460, 575 75 lbs Aluminum - engraved Epoxy enamel RAL7030 -
Stone Gray 0.15 IPS NEMA design B Copper - Random Wound Class F
Meets NEMA MG1-2006, Part 31 Class B @ 1.0SF, Class F @ 1.15SF 18
Months Cast aluminum with bolted feet Cast aluminum Cast aluminum
Neoprene (o-ring) Plastic Bi-directional - polypropylene N/A Die
Cast Aluminum / Copper High strength carbon steel (C1045) Double
Shielded Sealed for life
1.15 NEMA design B Copper - Random Wound Class F Meets NEMA
MG1-2006, Part 31 Class B @ 1.0SF, Class F @ 1.15SF 18 Months Cast
iron Cast iron Cast aluminum Neoprene Plastic Bi-directional -
polypropylene N/A Die Cast Aluminum / Copper High strength carbon
steel (C1045) Double Shielded
Temperature Rise (sine wave) Warranty Frame End Shields Conduit
Box Lead Seal Gasket Fan Cover Cooling Fan Drip Cover Rotor
Shaft
Mechanical Data
Bearing Type
Bearing Inner Cap Shaft Seal / Slinger Lubrication Lube Inlet
Fittings Lube Relief Fittings Condensation Drain Hardware Lifting
Eyebolt Nameplate Paint Vibration
No V-ring slinger - DE only Polyurea NA NA Drain holes - lowest
point (2) Zinc plated Cast in ( > 75 lbs ) Aluminum - engraved
Epoxy enamel RAL7030 - Stone Gray 0.15 IPS
No V-ring slinger - DE only Polyurea NA NA Drain holes - lowest
point (2) Zinc plated Cast in ( > 75 lbs) Aluminum - engraved
Epoxy enamel RAL7030 - Stone Gray 0.15 IPS
No V-ring slinger - DE only Polyurea NA NA Drain holes - lowest
point (2) Zinc plated Motors > 75 lbs Aluminum - engraved Epoxy
enamel RAL7030 - Stone Gray 0.15 IPS
1-6
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Severe DutySD10See Page 3-1
SD100See Page 3-18
SD100 IEEE 841See Page 3-33
Severe Duty - TEFC High N/A 1-400 140-S440 60 Hertz 3 - Phase
208-230/460 & 575 20HP 20HP < 230/460, 575 75 lbs Stainless
steel - engraved Epoxy enamel RAL7030 - Stone Gray 0.08 IPS (2, 4,
6 pole) 0.06 IPS (8 pole)
Severe Duty - TEFC NEMA Premium / NEMA Premium Plus N/A 1-400
140-S440 60 Hertz 3 - Phase 208-230/460 & 575 20HP 20HP <
230/460, 575 75 lbs Stainless steel - engraved Epoxy enamel RAL7030
- Stone Gray 0.08 IPS
Severe Duty / IEEE 841 (2001) - TEFC NEMA Premium / NEMA Premium
Plus N/A 1-400 140-S440 60 Hertz 3 - Phase 460 & 575
1.15 NEMA design B Copper - Random Wound Class F Meets NEMA
MG1-2006, Part 31 Class B @ 1.0SF, Class F @ 1.15SF 5 Years Cast
iron Cast iron Cast iron Neoprene Cast iron Bi-directional -
polypropylene S440 Locked & Keyed Bronze N/A Die Cast Aluminum
/ Copper High strength carbon steel (C1045) Single Shielded 280-440
Single Shielded Regreasable inlet & outlet Cast iron 250-440
Stationary Bearing Caps Inpro/Seal Bearing Isolator DE & ODE
Polyurea Alemite Pressure relief T-drains - lowest point (2) Zinc
plated Motors > 75 lbs Stainless steel - embossed Epoxy enamel
RAL7030 - Stone Gray 0.06 IPS
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-7
Siemens 3AC Integral Horse Power MotorsFeatures at a
GlanceHazardous DutyRGZZESDSee Page 4-1
RGZZESD 1D1See Page 4-7
Enclosure Efciency Thrust HP Range Frame Size
Hazardous Duty - TEFC High N/A 1-300 140-440 60 Hertz 3 - Phase
230/460 460 only 25HP and above 1.0 NEMA design B Copper - Random
Wound Class F Meets NEMA MG1-2006, Part 31 Class B @ 1.0SF &
Class F @ 1.15SF 3 Years Cast Iron Cast Iron Cast Iron
Hazardous Duty - TEFC High N/A 1-400 140-S440 60 Hertz 3 - Phase
460 1.15 (sine wave), 1.0 (VFD) NEMA design B (except for derates)
Copper - Random Wound Class F Meets NEMA MG1-2006, Part 31 Class B
@ 1.0SF & Class F @ 1.15SF 3 Years Cast Iron Cast Iron Cast
Iron Neoprene
Electrical Data
Frequency Power Voltage Service Factor (sine wave) Electrical
Design Stator Windings Insulation Temperature Rise (sine wave)
Warranty Frame End Shields Conduit Box Lead Seal Gasket Fan Cover
Cooling Fan Drip Cover Rotor Shaft
Cast Iron Bi-directional, Polypropylene N/A Die Cast Aluminum
High Strength Carbon Steel (C1045) Single Shielded
Cast Iron Bi-directional, Polypropylene N/A Die Cast Aluminum
High Strength Carbon Steel (C1045) Single Shielded
Mechanical Data Mechanical Data
Bearing Type
Bearing Inner Cap Shaft Seal / Slinger
Stationary Bearing Caps 140-250 Shaft Seal DE 280-440 V-Ring
Slinger DE Polyurea Alemite Plug 400-440 Only Zinc Plated 140-180
Provisions 210-440 Included Stainless Steel - Engraved Epoxy Enamel
RAL7030 - Stone Gray 0.08 IPS
Stationary Bearing Caps 140-250 Shaft Seal DE 280-440 V-Ring
Slinger DE Polyurea Alemite Plug T-Drain Zinc Plated 140-180
Provisions 210-440 Included Stainless Steel - Engraved Epoxy Enamel
RAL7030 - Stone Gray 0.06 IPS
Lubrication Lube Inlet Fittings Lube Relief Fittings
Condensation Drain Hardware Lifting Eyebolt Nameplate Paint
Vibration
1-8
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Inverter DutyRGZESDISee Pages 5-1. 5-4
Denite Purpose - Vertical MotorsRGZZESDISee Page 5-7
RGZVESDSee Page 6-1
RGZVILESDSee Page 6-9
Severe / Inverter Duty - TEFC High N/A 1-400 140-S440 60 Hertz 3
- Phase 460 1.15 (sine wave), 1.0 (VFD) NEMA design B (except for
derates) Copper - Random Wound Class F Meets NEMA MG1-2006, Part 31
Class B @ 1.0SF & Class F @ 1.15SF 3 Years Cast Iron Cast Iron
Cast Iron Neoprene Cast Iron Bi-directional, Polypropylene N/A Die
Cast Aluminum High Strength Carbon Steel (C1045) Single
Shielded
Hazardous / Inverter Duty - TEFC High N/A 1-200 140-440 60 Hertz
3 - Phase 460 1.0 NEMA design B (except for derates) Copper -
Random Wound Class F Meets NEMA MG1-2006, Part 31 Class B @ 1.0SF 3
Years Cast Iron Cast Iron Cast Iron
Severe Duty - TEFC High Normal 1-250 140-440 60 Hertz 3 - Phase
230/460 1.15 NEMA design B Copper - Random Wound Class F Meets NEMA
MG1-2006, Part 31 Class B @ 1.05F, Class F @ 1.15SF 3 Years Cast
iron Cast iron Cast iron Neoprene
Severe Duty - TEFC High In-Line 3-250 180-440 60 Hertz 3 - Phase
230/460 1.15 NEMA design B Copper - Random Wound Class F Meets NEMA
MG1-2006, Part 31 Class B @ 1.0SF, Class F @ 1.15SF 3 Years Cast
iron Cast iron Cast iron Neoprene Cast iron Bi-directional -
polypropylene Cast Iron Die cast copper High strength carbon steel
(C1045) DE: 180-250 Open 280-440 Double Shielded NDE: 180-440
Duplex angular contact Thrust bearing Stationary Bearing Caps
V-ring slinger - DE and ODE
Cast Iron Bi-directional, Polypropylene N/A Die Cast Aluminum
High Strength Carbon Steel (C1045) Single Shielded
Cast iron Bi-directional - polypropylene Steel Die cast aluminum
High strength carbon steel (C1045) DE: 140-250 / ODE: 140-360 -
Open DE: 280-360 Single Shielded DE & NDE: 400 Double Shielded
DE: 440 Open / ODE: Single Shielded Stationary Bearing Caps 140-250
Shaftt Seal 280-360 None 400-440 V-Ring Slinger Polyurea Alemite
Plug T - drains Zinc plated 140-440 Included Stainless Steel -
Engraved Epoxy Enamel RAL7030 - Stone Gray 0.08 IPS
Stationary Bearing Caps 140-250 Shaft Seal DE 280-440 V-Ring
Slinger DE Polyurea Alemite Plug T-Drain Zinc Plated 140-180
Provisions 210-440 Included Stainless Steel - Engraved Epoxy Enamel
RAL7030 - Stone Gray 0.06 IPS
Stationary Bearing Caps 140-250 Shaft Seal DE 280-440 V-Ring
Slinger DE Polyurea Alemite Plug 400-440 Only Zinc Plated 140-180
Provisions 210-440 Included Stainless Steel - Engraved Epoxy Enamel
RAL7030 - Stone Gray 0.06 IPS
Polyurea Alemite Plug T-drains Zinc plated 180-440 Included
Stainless Steel - Engraved Epoxy Enamel RAL7030 - Stone Gray 0.08
IPS
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-9
Siemens IEC MotorsFeatures at a GlanceIEC Motors1LA7See Page
7-1
1LA6See Page 7-10
Enclosure Efciency HP / kW Range Frame Size
TEFC eff2 60Hz: 0.07 - 21.3 kW 50Hz: 0.12 - 18.5 kW 56 -160 50
and 60 Hertz 3 - Phase 230/400 @ 50 Hertz, 460V @ 60 Hertz Stock
1.1 Design N Copper - Random Wound Class F Class B @ 1.0SF, Class F
@ 1.1SF 12/18 month Cast Aluminum Cast Aluminum Aluminum Alloy
Neoprene Corrosion Protected Steel Plate Plastic Die Cast Aluminum
Double Shielded
TEFC eff2 60Hz: 0.86 - 21.3 kW 50Hz: 0.75 - 18.5 100-160 50
Hertz 3 - Phase 230/400 1.0 Design N Copper - Random Wound Class F
Class B @ 1.0SF, Class F @ 1.1SF 12/18 month Cast Iron Cast Iron
Cast Iron Neoprene Corrosion Protected Steel Plate Plastic Die Cast
Aluminum Double Shielded
Electrical Data Mechanical Data
Frequency Power Voltage Service Factor (sine wave) Electrical
Design Stator Windings Insulation Temperature Rise Warranty Frame
Endshields Conduit Box Lead Seal Gasket Fan Cover Cooling Fan Rotor
Bearing Type
Protection Design Lubrication Lube Inlet Fittings Condensation
Drain Hardware Lifting Eyebolt Nameplate Paint Vibration Acc. to
DIN EN 60034-14
IP55 Lithium Sealed Bearings Optional Zinc Plated 30 kg and
above Stainless Steel RAL 7030 World wide nish Vibration Grade
A
IP55 Lithium Sealed Bearings Optional Zinc Plated 30 kg and
above Stainless Steel RAL 7030 World wide nish Vibration Grade
A
1-10
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1LA9See Page 7-12
1LG6See Page 7-17
1MJSee Page 7-24
TEFC eff1 60Hz: 1/6 - 25 HP 50Hz: 0.16 - 18.5 kW 56-160 50 and
60 Hertz 3 - Phase 230/400 @ 50 Hertz, 460V @ 60 Hertz Stock 1.15
Design N Copper - Random Wound Class F Class B @ 1.0SF, Class F @
1.15SF 12/18 month Cast Aluminum Cast Aluminum Aluminum Neoprene
Corrosion Protected Steel Plate Plastic Die Cast Aluminum 180-250:
Single Shielded 280-315: Regreasable IP55 Lithium Sealed Bearings
Optional Zinc Plated 30 kg and above Stainless Steel RAL 7030 World
wide nish Vibration Grade A
TEFC eff1 60Hz: 25-300 HP 50Hz: 18.5 - 250kW 180-315 50 and 60
Hertz 3 - Phase 230/400 @ 50 Hertz, 460V @ 60 Hertz Stock 1.15
Design N Copper - Random Wound Class F Class B @ 1.0SF, Class F @
1.15SF 12/18 month Cast Iron Cast Iron 180-225, Aluminum Alloy
250-315, Cast Iron Neoprene Glass Reinforced Plastic Plastic Die
Cast Aluminum Double Shielded
TEFC eff2 60Hz: 0.10 -152kW 50Hz: 0.37 -132kW 71-315 50 Hertz 3
- Phase 230/400 1.0 Design N Copper - Random Wound Class F Class B
@ 1.0SF 12/18 month Cast Iron Cast Iron 71-132, 180-225 Aluminum
Alloy 160, 250-315, Cast Iron Neoprene Corrosion Protected Steel
Plate 71-315: Plastic Die Cast Aluminum 71-80: Single Shielded
90-250: Shielded 280-315: Regreasable IP55 Lithium Up To 250:
Sealed Bearings 280 and above: Flat Type Nipple Not Permitted Zinc
Plated 30 kg and above Aluminum 71- 200: RAL 7030 World wide nish
225-315:RAL 7030 Standard nish Vibration Grade A
IP55 Lithium Up To 250: Sealed Bearings 280 and above: Flat Type
Nipple Standard Zinc Plated 30 kg and above Stainless Steel RAL
7030 Standard nish Vibration Grade A
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-11
Introduction
Wide Selection of MotorsWide Selection Providing value also
means having the right motor for the job. At Siemens, we offer
hundreds of motor types, sizes, ratings and modications. And, as
you read these words, we are adding to this list as part of our
commitment to become your single source for motors. The Right
Efciency for Your Application To meet your cost of ownership and
motor management needs, Siemens offers several levels of energy
efciency in many of its motors: High NEMA Premium NEMA Premium Plus
The World's Most Energy Efcient Line of Motors Lower your energy
costs today with the world's most energy efcient line of motors.
New regulatory standards and rising energy costs create increasing
pressure to maximize energy efciency and reduce your carbon
footprint. Siemens breakthrough copper-rotor motors have set new
standards for efciency. Adding copper to the stator windings,
Siemens has developed motors that can withstand the heat.
Two-thirds of an AC induction motor's electrical loss occurs in the
stator. The addition of the copper rotor reduces wasteful,
resistive heating. Copper's volumetric electrical conductivity is
approximately 66% higher than aluminum. Total Customer Support When
youre looking for a motor, look for a highly trained specialist to
help you match the right motor to your specic needs. Siemens sales
engineers share the knowledge, training and experience to help you
solve performance or installation challenges to ensure that you
will receive the best value for your investment. Our customer
service center takes pride in putting our customers rst. Whether
its an expedited shipment, tracking your order, or making sure your
motor is properly installed, these professionals wont be satised
until you are. Iron-Clad Quality The quality of our motors begins
with the design experience we have gained through more than 100
years of manufacturing and applying motors. We build on this
experience every day with new designs that incorporate the latest
materials and techniques to provide even higher levels of
performance, operating efciency and reliability.
QuikMOD Detail
IEC Metric Motors
Denite Purpose Motors
Inverter Duty Motors
Hazardous Duty Motors
Severe Duty Motors
General Purpose Motors
Availability Siemens has hundreds of distributor stocking
locations throughout North America with a wide selection of NEMA
and IEC frame sizes and ratings. Motors are available same day from
a local source you can trust. These advanced motor designs are
manufactured in a state-of-the-art ISO 9001 certied facility. Here,
our manufacturing technicians subject each motor to more than 100
separate quality inspections before it leaves our plant. . .and
before it is good enough to be offered to you. These distributors
are supported by multiple stocking centers and our customer service
centers in Little Rockland Cincinnati. Need something special? Our
modication centers have complete motor modication capabilities to
help you get the exact motor you need, when you need it.
Part Number Index
Dimensions
Typical Performance Data
Custom Options Detail
1-12
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Introduction
Cancellation Charges & Change NoticesCancellation Charges
Note: A minimum charge of $100 will be assessed for any order
cancellation for modied or custom motors. Stock Motors No charges
will be incurred if an order is cancelled prior to shipment. A
stock motor is returnable (freight paid by purchaser) immediately
after shipment if returned in new condition (original, undamaged
packaging) for a minimum restocking charge of 20% of the motor net
price. Non-Stock Motors For non-stock motors, the following graph
will apply to determine cancellation charges after the order is
received and entered at the factory. Completion progress will be
determined by a Siemens Customer Service Representative. A charge
of 15% of the total net motor price will be assessed if an order is
cancelled after it has been released for engineering and drafting
whether or not the drawings have been completed and/or submitted
for approval. Change Notice All change notices applied to
in-process orders logged into the Siemens customer service
department and requiring a product change will be subject to a $100
net charge plus the applicable modication adder. Delivery dates
will be adjusted according to the type of change/ modication
requested. This policy does not pertain to commercial changes such
as ship to or bill to addresses.
General Purpose Motors Severe Duty Motors Hazardous Duty Motors
Inverter Duty Motors Denite Purpose Motors IEC Metric Motors
QuikMOD Detail Custom Options Detail Typical Performance Data
Dimensions Part Number Index
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-13
Introduction
Warranty ProcedureStandard Terms & Conditions of Sale
Warranty - Company warrants that on the date of shipment to
purchaser the goods will be of the kind and quality described
herein, merchantable, and free of defects in workmanship and
material. If within one year from date of operation, but not more
than eighteen months from date of shipment by Company, of any item
of the goods, purchaser discovers that such item was not as
warranted above and promptly noties company in written thereof,
Company shall remedy such defect by, at Companys option,
adjustment, repair, or replacement of the item and any affected
part of the goods. Purchaser shall assume all responsibility and
expense for removal, reinstallation and freight in connection with
the foregoing remedy. The same obligations and conditions shall
extend to replacement items furnished by company here under.
Company shall have the right of disposal of items replaced by it.
Purchaser shall grant Company to determine any defect in the goods.
In the event that adjustment, repair or replacement does not remedy
the defect, the Company and Purchaser shall negotiate in good faith
an equitable adjustment in the contract price. (Service calls and
overtime are not covered under Siemens warranty policy). The
Companys responsibility does not extend to any item of the goods
which has not been manufactured and sold by Company. Such item
shall be covered only by express warranty, if any, of the
manufacture thereof. The Company and its suppliers shall also have
no responsibility if the goods have been improperly stored,
handled, or installed or if the goods have not been operated or
maintained according to their ratings or according to instructions
in Company or supplier furnished manuals, or if unauthorized
repairs or modications have been made to the goods. THIS WARRANTY
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES (EXCEPT TITLE),
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS, AND CONSTITUTES THE ONLY WARRANTY OF COMPANY WITH
RESPECT TO THE GOODS. The foregoing states Purchasers exclusive
remedy against Company and its suppliers for any defect in the
goods or for failure of the goods to be as warranted, whether
Purchasers remedy is based on contract, warranty, failure of such
remedy to achieve its essential purpose, tort (including
negligence), indemnity or any other legal theory, and whether
arising out of warranties, representations, instructions,
installations or defects from any cause.
Denite Purpose Motors
Inverter Duty Motors
Hazardous Duty Motors
Severe Duty Motors
General Purpose Motors
Warranty TypeIEC Metric Motors
Initial Operation
A. 1 Year Standard Warranty 18 Months RG, RGE, RGE1, RGZP,
RGZPSD, RGZAD, RGZE Single Phase Motors GP10A, GP10, GP100A, GP100,
3 Years ESD only, RGZESD, RGZVILESD, RGZZESD, RGZEESD, HSRGZVESD,
SD10, SD100 5 Years RGZESDX , RGZEESDX, SD100 IEEE841 B. Remedy
After shipment from manufacturer
QuikMOD Detail
After shipment from manufacturer
After shipment from manufacturer Siemens Options Repair Replace
Responsibility Transportation Damage Claims Removal Freight
Installation Excludes Improper Storage In & Out Costs
Transportation Damage (Normal) FOB our dock Freight Allowed
Custom Options Detail
C. Purchaser's
Typical Performance Data
D. Specically
Part Number Index
Dimensions
E. Shipment
1-14
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Introduction
Warranty ProcedureREFERENCE NOTES 1. After the inspection,
contact Little Rock Plant for authorization of repair or
replacement. Unapproved repairs will be denied. 2. Removal,
reinstallation, freight and service calls are NOT covered by
warranty. 3. A standard EASE Warranty report must be lled out and a
Siemens job/p.o. # issued. The Warranty report and nameplate (if
motor scrapped in the eld) plus the invoice must be sent to the
Little Rock Plant. 4. Premium efciency motors will modify major
repair pricing by increasing schedule 10%. 5. Allowances listed are
for open drip-proof and totally enclosed, non-ventilated motors
with class B or F insulation and all voltages between 100 and 600
volts. For variations consult factory. 6. Minor repairs-consist of
all the operations listed under minor repairs plus the cost of
material and rewinding of stator. If no allowance is shown, consult
the factory. 7. Major repairs-consist of all the operations listed
under major repairs plus the cost of material and rewinding of
stator. If no allowance is shown, consult the factory. 8. Shaded
areas represent units that will be replaced when possible, without
repairs.
General Purpose Motors Severe Duty Motors Hazardous Duty Motors
Inverter Duty Motors
9. Replacement Parts-will be furnished at no Charge from the
factory, i.e. bearings for 40 HP and above. 10. Replacement
Motors-will be furnished at no Charge from the factory. Should it
be necessary for reasons of expediency for the service shop to
replace a motor from their stock, a replacement motor will be
furnished at no Charge from the factory, shipped Freight allowed.
11. Defective parts, i.e. bearings, are subject to return upon
request to the factory for inspection and approval for
reimbursement. DATE CODING Siemens motors are date coded by the
model number/date code/serial number on the nameplate. Siemens date
codes for NEMA frame size, low voltage motors built in USA and
Mexico is as follows: The rst digit is alphabetic and represents
the month. The second and third digits are numeric and are the last
two digits of the year. A = January B = February C = March D =
April E = May F = June G = July H = August J = September K =
October L = November M = December
Denite Purpose Motors IEC Metric Motors QuikMOD Detail Custom
Options Detail Typical Performance Data Dimensions Part Number
Index
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
1-15
Introduction
SiemensPOWER CONVERSION DIVISION NEMA MOTORS 1ST call To SEA
salesman or sales ofce by OEM, Distributor or the End user. The
following information must be supplied at this time: 1. Sales order
number 2. Model or order number from the nameplate of the motor 3.
Serial number or date code 4. Complete nameplate data 5.
Application (blower, compressor, conveyor etc) 6. Nature of problem
(electrical, mechanical etc) 2nd call By SEA salesman or sales ofce
by OEM, Distributor or the End user. To Siemens Warranty
Administrator. Contact numbers: Phone number 501 897 1344 Fax
number 678 297 8242 Email [email protected] Warranty
Adminstrator will direct to the nearest recommended Siemens
authorized service center. 3rd call To the recommended Siemens
authorized service center. Will direct analyzing of failure /
evaluation of problem. If the problem is a manufactures defect, the
Siemens Warranty Administrator Will make a determination on what
the next step will be. Example ( repair or replace) To Siemens
customer to update the customer on the action taken by Siemens
Denite Purpose Motors
Inverter Duty Motors
Hazardous Duty Motors
Severe Duty Motors
General Purpose Motors
4th call
Vaughn Watkins Warranty Administrator Siemens Energy and
Automation Power Conversion Division Little Rock, Ar. 72206 Tel:
501 897 1344 Fax: 678 297 8242 email:
[email protected]
QuikMOD Detail
IEC Metric Motors
IMPORTANT NOTICE MAIL INVOICE PLUS PROPER WARRANTY REPAIR REPORT
TO THE WARRANTY ADMINISTRATOR. IF SIEMENS IS TO BE BILLED FOR
OVERTIME, AUTHORIZATION MUST BE OBTAINED FROM WARRANTY
ADMINISTRATOR BEFORE OVERTIME WORK IS PERFORMED. MATERIAL AND
SERVICES ARE PURCHASED FOR RESALE AND ARE EXEMPT FROM STATE AND
LOCAL SALES AND USE TAX.
Custom Options Detail
Frames 143-449
Typical Performance Data
Siemens Energy and Automation Power Conversion Division 14000
Dineen Drive Little Rock, Ar. 72206 Tel: 501 897 1344 Fax: 678 297
8242
MOTOR SERVICE PROGRAM SUBJECT TO CHANGE WITHOUT NOTICE!
Part Number Index
Dimensions
1-16
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Introduction
General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame)GP10A
series of TEFC motors is ideal for material handling, pump, fan,
compressor and other general purpose industrial applications.
Stator/Windings Manufactured with premium electrical grade steel
laminations and copper electrical magnet wire to lower losses for
improved efciencies. A unique stator core design lowers ux density
while increasing cooling capacity. Large conductor cross section
reduces resistance and lowers stator losses. Insulation
Proprietary, inverterrated, NEMA Class F, non-hygroscopic,
insulation system with Class B temperature rise @ 1.0 SF, provides
an extra margin of thermal life. Varnish system application ensures
maximum ire penetration to provide protection from moisture,
corrosion and electrical surges. This insulation system meets or
exceeds NEMA MG1-2006, Part 31 making all motors suitable for
operation with adjustable frequency drives. Cooling A
bi-directional, nonsparking fan is locked and keyed to the shaft.
Its low-inertia design reduces windage losses, improves air ow,
reduces noise and provides dependable cooling. Polycarbonate fan
covers are provided on all frame sizes. Bearings Lubricated for
life, oversized, complete with external bearing protection.
Lubrication A specially formulated, high temperature, polyurea
based grease is used to provide more than four times the
lubrication life of other greases.
High Efciency
General Purpose Motors
Performance Specications 1 to 20 HP 1.15 service factor, 40C
ambient 3600, 1800, 1200 or 900 RPM 3 phase, 60 Hz; 208-230/460 and
575 volt operation Meets or exceeds EPAct efciency standards Class
F insulation, Class B temperature rise @ 1.0SF NEMA Design B,
Continuous Duty 143T through 256T frame
Severe Duty Motors Hazardous Duty Motors
Features for Long LifeFrame & Bearing Housings Die cast
aluminum construction for exceptional heat dissipation and
structural integrity. Equipped with bolt-on feet for mounting
exibility. Condensation drain holes provided. Integrally cast
lifting eyes. Unique frame n design maximizes cooling. Rotor A
unique rotor design provides improved efciency. Large cross section
bars and end rings reduce resistance for lower rotor losses. Each
die cast aluminum rotor assembly is dynamically balanced for
extended bearing life, and includes a high strength carbon steel
(C1045) shaft for maximum rotor performance.
Oversized Conduit Box Cast aluminum construction that is larger
than industry standards, diagonallysplit and rotatable in 90
increments for quick and easy connections. A ground lug is
included. Non-wicking, clearly and permanently marked leads.
Corrosion Resistance Die cast aluminum construction, polycarbonate
fan and fan cover, zinc-plated hardware, epoxy enamel paint and
aluminum nameplate resist corrosion. Modiable Siemens GP10A motors
are available with a variety of QuikMOD modications and kits.
Inverter Duty Motors Denite Purpose Motors IEC Metric Motors
QuikMOD Detail
Specications table begins on the next page
Custom Options Detail Typical Performance Data Dimensions Part
Number Index
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
2-1
Introduction
General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame)HP RPM
Frame Voltage Type DE Bearing Part Number List Price $ Mult. Sym.
FL Amps*
General Purpose Motors
High EfciencyFL Nom. Weight Stock Eff. (%) (lbs) Model
Horizontal, Foot Mounted 1 3600 3600 1800 1800 1200 1200 900 900
3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200
900 900 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800
1200 1200 900 900 143T 143T 143T 143T 145T 145T 182T 182T 143T 143T
145T 145T 182T 182T 184T 184T 145T 145T 145T 145T 184T 184T 213T
213T 182T 182T 182T 182T 213T 213T 215T 215T 184T 184T 184T 184T
215T 215T 254T 254T 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
1LE21011AA114AA3 1LE21011AA113AA3 1LE21011AB214AA3 1LE21011AB213AA3
1LE21011AC314AA3 1LE21011AC313AA3 1LE21011CD114AA3 1LE21011CD113AA3
1LE21011AA214AA3 1LE21011AA213AA3 1LE21011AB314AA3 1LE21011AB313AA3
1LE21011CC114AA3 1LE21011CC113AA3 1LE21011CD314AA3 1LE21011CD313AA3
1LE21011AA314AA3 1LE21011AA313AA3 1LE21011AB414AA3 1LE21011AB413AA3
1LE21011CC314AA3 1LE21011CC313AA3 1LE21012AD114AA3 1LE21012AD113AA3
1LE21011CA114AA3 1LE21011CA113AA3 1LE21011CB114AA3 1LE21011CB113AA3
1LE21012AC114AA3 1LE21012AC113AA3 1LE21012AD214AA3 1LE21012AD213AA3
1LE21011CA314AA3 1LE21011CA313AA3 1LE21011CB314AA3 1LE21011CB313AA3
1LE21012AC214AA3 1LE21012AC213AA3 1LE21012BD114AA3 1LE21012BD113AA3
280 280 280 280 350 350 547 547 288 288 310 310 373 373 593 593 335
335 336 336 413 413 683 683 373 373 385 385 530 530 978 978 486 486
440 440 791 791 1362 1362 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 1.4 1.12 1.5 1.2 1.6 1.28 2.1 1.64 2
1.6 2.2 1.76 2.4 1.92 3 2.4 2.6 2.08 3 2.4 3.1 2.48 3.3 2.64 3.7
2.96 4 3.2 4 3.36 4.8 3.84 6.2 4.96 6.7 5.36 6.8 5.44 8.8 7.04 80
80 82.5 82.5 80 80 74 74 82.5 82.5 84 84 85.5 85.5 77 77 84 84 84
84 86.5 86.5 82.5 82.5 85.5 85.5 87.5 87.5 87.5 87.5 84 84 87.5
87.5 87.5 87.5 87.5 87.5 85.5 85.5 32 32 34 34 35 35 57 57 33 33 38
38 54 54 71 71 35 35 40 40 65 65 75 75 56 56 59 59 85 85 89 89 62
62 66 66 100 100 157 157
Severe Duty Motors
1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 3
3 3 3 3 3
Custom Options Detail
QuikMOD Detail
IEC Metric Motors
Denite Purpose Motors
Inverter Duty Motors
Hazardous Duty Motors
3 3 5 5 5 5 5 5 5 5
Dimensions
Typical Performance Data Part Number Index
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V
2-2
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
DOE#CC032A
Introduction
General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame)HP 7.5
7.5 7.5 7.5 7.5 7.5 7.5 7.5 10 10 10 10 10 10 15 15 15 15 20 20 20
20 RPM 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800
1200 1200 3600 3600 1800 1800 3600 3600 1800 1800 Frame 213T 213T
213T 213T 254T 254T 256T 256T 215T 215T 215T 215T 256T 256T 254T
254T 254T 254T 256T 256T 256T 256T Voltage 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 Type GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A DE Bearing Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Part Number 1LE21012AA114AA3
1LE21012AA113AA3 1LE21012AB114AA3 1LE21012AB113AA3 1LE21012BC114AA3
1LE21012BC113AA3 1LE21012BD214AA3 1LE21012BD213AA3 1LE21012AA214AA3
1LE21012AA213AA3 1LE21012AB214AA3 1LE21012AB213AA3 1LE21012BC214AA3
1LE21012BC213AA3 1LE21012BA114AA3 1LE21012BA113AA3 1LE21012BB114AA3
1LE21012BB113AA3 1LE21012BA214AA3 1LE21012BA213AA3 1LE21012BB214AA3
1LE21012BB213AA3 List Price $ 635 635 615 615 1010 1010 1422 1422
749 749 749 749 1187 1187 979 979 956 956 1211 1211 1150 1150 Mult.
Sym. GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 FL Amps* 9 7.2
9.5 7.6 10.5 8.4 13 10.4 11.5 9.2 12.5 10 13.5 10.8 18 14.4 19 15.2
23.5 18.8 25 20
High EfciencyFL Nom. Weight Stock Eff. (%) (lbs) Model 88.5 88.5
89.5 89.5 89.5 89.5 85.5 85.5 89.5 89.5 89.5 89.5 89.5 89.5 90.2
90.2 91 91 90.2 90.2 91 91 96 96 102 102 163 163 189 189 113 113
114 114 175 175 168 168 166 166 179 179 185 185
General Purpose Motors
Horizontal, Foot Mounted - continued
Severe Duty Motors Hazardous Duty Motors Inverter Duty
Motors
Denite Purpose Motors IEC Metric Motors
C-Face, Horizontal, Foot Mounted 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5
1.5 1.5 1.5 1.5 3600 3600 1800 1800 1200 1200 900 900 3600 3600
1800 1800 1200 1200 900 900 143TC 143TC 143TC 143TC 145TC 145TC
182TC 182TC 143TC 143TC 145TC 145TC 182TC 182TC 184TC 184TC
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball 1LE21011AA114EA3
1LE21011AA113EA3 1LE21011AB214EA3 1LE21011AB213EA3 1LE21011AC314EA3
1LE21011AC313EA3 1LE21011CD114EA3 1LE21011CD113EA3 1LE21011AA214EA3
1LE21011AA213EA3 1LE21011AB314EA3 1LE21011AB313EA3 1LE21011CC114EA3
1LE21011CC113EA3 1LE21011CD314EA3 1LE21011CD313EA3 342 342 342 342
411 411 634 634 349 349 371 371 461 461 680 680 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 1.4
1.12 1.5 1.2 1.6 1.28 2.1 1.64 2 1.6 2.2 1.76 2.4 1.92 3 2.4 80 80
82.5 82.5 80 80 74 74 82.5 82.5 84 84 85.5 85.5 77 77 32 32 34 34
35 35 57 57 33 33 38 38 54 54 71 71
QuikMOD Detail Custom Options Detail Typical Performance
Data
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V
Dimensions Part Number Index
DOE#CC032A
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
2-3
Introduction
General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame)HP 2
RPM 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200
1200 900 900 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800
1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200 3600 3600 1800
1800 3600 3600 1800 1800 Frame 145TC 145TC 145TC 145TC 184TC 184TC
213TC 213TC 182TC 182TC 182TC 182TC 213TC 213TC 215TC 215TC 184TC
184TC 184TC 184TC 215TC 215TC 254TC 254TC 213TC 213TC 213TC 213TC
254TC 254TC 256TC 256TC 215TC 215TC 215TC 215TC 256TC 256TC 254TC
254TC 254TC 254TC 256TC 256TC 256TC 256TC Voltage 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 Type GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A DE Bearing Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Part Number 1LE21011AA314EA3
1LE21011AA313EA3 1LE21011AB414EA3 1LE21011AB413EA3 1LE21011CC314EA3
1LE21011CC313EA3 1LE21012AD114EA3 1LE21012AD113EA3 1LE21011CA114EA3
1LE21011CA113EA3 1LE21011CB114EA3 1LE21011CB113EA3 1LE21012AC114EA3
1LE21012AC113EA3 1LE21012AD214EA3 1LE21012AD213EA3 1LE21011CA314EA3
1LE21011CA313EA3 1LE21011CB314EA3 1LE21011CB313EA3 1LE21012AC214EA3
1LE21012AC213EA3 1LE21012BD114EA3 1LE21012BD113EA3 1LE21012AA114EA3
1LE21012AA113EA3 1LE21012AB114EA3 1LE21012AB113EA3 1LE21012BC114EA3
1LE21012BC113EA3 1LE21012BD214EA3 1LE21012BD213EA3 1LE21012AA214EA3
1LE21012AA213EA3 1LE21012AB214EA3 1LE21012AB213EA3 1LE21012BC214EA3
1LE21012BC213EA3 1LE21012BA114EA3 1LE21012BA113EA3 1LE21012BB114EA3
1LE21012BB113EA3 1LE21012BA214EA3 1LE21012BA213EA3 1LE21012BB214EA3
1LE21012BB213EA3 List Price $ 396 396 397 397 500 500 770 770 461
461 474 474 618 618 1066 1066 573 573 527 527 878 878 1471 1471 723
723 704 704 1119 1119 1531 1531 837 837 837 837 1296 1296 1088 1088
1064 1064 1320 1320 1259 1259 Mult. Sym. GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 FL Amps* 2.6 2.08 3 2.4 3.1 2.48 3.3 2.64 3.7 2.96 4 3.2
4 3.36 4.8 3.84 6.2 4.96 6.7 5.36 6.8 5.44 8.8 7.04 9 7.2 9.5 7.6
10.5 8.4 13 10.4 11.5 9.2 12.5 10 13.5 10.8 18 14.4 19 15.2 23.5
18.8 25 20
General Purpose Motors
High EfciencyFL Nom. Weight Stock Eff. (%) (lbs) Model 84 84 84
84 86.5 86.5 82.5 82.5 85.5 85.5 87.5 87.5 87.5 87.5 84 84 87.5
87.5 87.5 87.5 87.5 87.5 85.5 85.5 88.5 88.5 89.5 89.5 89.5 89.5
85.5 85.5 89.5 89.5 89.5 89.5 89.5 89.5 90.2 90.2 91 91 90.2 90.2
91 91 35 35 40 40 65 65 75 75 56 56 59 59 85 85 89 89 62 62 66 66
100 100 157 157 96 96 102 102 163 163 189 189 113 113 114 114 175
175 168 168 166 166 179 179 185 185 DOE#CC032A
C-Face, Horizontal, Foot Mounted - continued 2 2 2 2 2 2 2 3 3 3
3 3 3 3 3 5 5 5 5 5 5 5 5 7.5 7.5
QuikMOD Detail
IEC Metric Motors
Denite Purpose Motors
Inverter Duty Motors
Hazardous Duty Motors
Severe Duty Motors
7.5 7.5 7.5 7.5 7.5 7.5 10 10 10 10 10 10 15 15
Typical Performance Data
Custom Options Detail
Dimensions
15 15 20 20 20 20 2-4
Part Number Index
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
Introduction
General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame)HP RPM
Frame Voltage Type DE Bearing Part Number List Price $ Mult. Sym.
FL Amps*
High EfciencyFL Nom. Weight Stock Eff. (%) (lbs) Model
General Purpose Motors
C-Face, Horizontal, Footless 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5
1.5 1.5 1.5 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 5 5 5 5 5 5 5 5 3600
3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200 900
900 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200
1200 900 900 3600 3600 1800 1800 1200 1200 900 900 143TC 143TC
143TC 143TC 145TC 145TC 182TC 182TC 143TC 143TC 145TC 145TC 182TC
182TC 184TC 184TC 145TC 145TC 145TC 145TC 184TC 184TC 213TC 213TC
182TC 182TC 182TC 182TC 213TC 213TC 215TC 215TC 184TC 184TC 184TC
184TC 215TC 215TC 254TC 254TC 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball 1LE21011AA114GA3 1LE21011AA113GA3 1LE21011AB214GA3
1LE21011AB213GA3 1LE21011AC314GA3 1LE21011AC313GA3 1LE21011CD114GA3
1LE21011CD113GA3 1LE21011AA214GA3 1LE21011AA213GA3 1LE21011AB314GA3
1LE21011AB313GA3 1LE21011CC114GA3 1LE21011CC113GA3 1LE21011CD314GA3
1LE21011CD313GA3 1LE21011AA314GA3 1LE21011AA313GA3 1LE21011AB414GA3
1LE21011AB413GA3 1LE21011CC314GA3 1LE21011CC313GA3 1LE21012AD114GA3
1LE21012AD113GA3 1LE21011CA114GA3 1LE21011CA113GA3 1LE21011CB114GA3
1LE21011CB113GA3 1LE21012AC114GA3 1LE21012AC113GA3 1LE21012AD214GA3
1LE21012AD213GA3 1LE21011CA314GA3 1LE21011CA313GA3 1LE21011CB314GA3
1LE21011CB313GA3 1LE21012AC214GA3 1LE21012AC213GA3 1LE21012BD114GA3
1LE21012BD113GA3 358 358 358 358 427 427 662 662 365 365 386 386
487 487 708 708 413 413 413 413 527 527 797 797 487 487 500 500 645
645 1092 1092 601 601 554 554 905 905 1510 1510 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 1.4 1.12 1.5 1.2
1.6 1.28 2.1 1.64 2 1.6 2.2 1.76 2.4 1.92 3 2.4 2.6 2.08 3 2.4 3.1
2.48 3.3 2.64 3.7 2.96 4 3.2 4 3.36 4.8 3.84 6.2 4.96 6.7 5.36 6.8
5.44 8.8 7.04 80 80 82.5 82.5 80 80 74 74 82.5 82.5 84 84 85.5 85.5
77 77 84 84 84 84 86.5 86.5 82.5 82.5 85.5 85.5 87.5 87.5 87.5 87.5
84 84 87.5 87.5 87.5 87.5 87.5 87.5 85.5 85.5 32 32 34 34 35 35 57
57 33 33 38 38 54 54 71 71 35 35 40 40 65 65 75 75 56 56 59 59 85
85 89 89 62 62 66 66 100 100 157 157
Severe Duty Motors Hazardous Duty Motors Inverter Duty Motors
Denite Purpose Motors IEC Metric Motors QuikMOD Detail
Custom Options Detail Typical Performance Data Dimensions
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V
Part Number Index
DOE#CC032A
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
2-5
Introduction
General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame)HP 7.5
RPM 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200
1200 3600 3600 1800 1800 3600 3600 1800 1800 Frame 213TC 213TC
213TC 213TC 254TC 254TC 256TC 256TC 215TC 215TC 215TC 215TC 256TC
256TC 254TC 254TC 254TC 254TC 256TC 256TC 256TC 256TC Voltage
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 Type GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A
GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A GP10A DE Bearing
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Part Number
1LE21012AA114GA3 1LE21012AA113GA3 1LE21012AB114GA3 1LE21012AB113GA3
1LE21012BC114GA3 1LE21012BC113GA3 1LE21012BD214GA3 1LE21012BD213GA3
1LE21012AA214GA3 1LE21012AA213GA3 1LE21012AB214GA3 1LE21012AB213GA3
1LE21012BC214GA3 1LE21012BC213GA3 1LE21012BA114GA3 1LE21012BA113GA3
1LE21012BB114GA3 1LE21012BB113GA3 1LE21012BA214GA3 1LE21012BA213GA3
1LE21012BB214GA3 1LE21012BB213GA3 List Price $ 750 750 730 730 1157
1157 1570 1570 863 863 863 863 1335 1335 1126 1126 1103 1103 1358
1358 1297 1297 Mult. Sym. GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1 GPA1
GPA1 FL Amps* 9 7.2 9.5 7.6 10.5 8.4 13 10.4 11.5 9.2 12.5 10 13.5
10.8 18 14.4 19 15.2 23.5 18.8 25 20
General Purpose Motors
High EfciencyFL Nom. Weight Stock Eff. (%) (lbs) Model 88.5 88.5
89.5 89.5 89.5 89.5 85.5 85.5 89.5 89.5 89.5 89.5 89.5 89.5 90.2
90.2 91 91 90.2 90.2 91 91 96 96 102 102 163 163 189 189 113 113
114 114 175 175 168 168 166 166 179 179 185 185
C-Face, Horizontal, Footless - continued 7.5 7.5 7.5 7.5 7.5
Hazardous Duty Motors
Severe Duty Motors
7.5 7.5 10 10
Inverter Duty Motors
10 10 10 10 15
Denite Purpose Motors
15 15 15 20 20
IEC Metric Motors
20 20
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V
Part Number Index
Dimensions
Typical Performance Data
Custom Options Detail
QuikMOD Detail
2-6
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
DOE#CC032A
Introduction
General Purpose - TEFC MotorsGP10 - (Cast Iron Frame)GP10 motors
are ideal for both indoor and outdoor applications and in operating
atmospheres that contain moisture, dust and grit. These industry
workhorses are ideal for use in material handling, pump, fan,
compressor and other general purpose applications. Stator/Windings
Manufactured with premium electrical-grade steel laminations and
copper electrical magnet wire to lower losses for improved
efciencies. A unique stator core design lowers ux density while
increasing cooling capacity. Large conductor cross-section reduces
resistance and lowers stator losses. Insulation Proprietary
inverter-rated Class F non-hygroscopic insulation system with NEMA
Class B temperature rise @ 1.0SF provides an extra margin of
thermal life. Varnish system application ensures maximum wire
penetration to provide protection from moisture, corrosion and
electrical shock. This insulation system meets or exceeds NEMA
MG1-2006, Part 31, making all motors suitable for operation with
adjustable frequency drives. Cooling A bi-directional, non-sparking
fan is locked and keyed to the shaft. Its design reduces windage
losses, improves air ow, reduces noise and provides dependable
cooling. Polycarbonate fan covers are provided on 143T-365T frames
and cast iron for frames 404T and larger. Bearings Oversized,
lubricated for life (143T-256T frames). Regreasable, oversized,
single shielded (284T-449T frames) with cast iron inner caps
(444T449T frames). Alemite grease ttings on the inlets and pipe
plugs on the relief ports (284T449T frames) for ease of routine
maintenance. For added bearing protection, motors are equipped with
a drive end shaft V-ring slinger. Lubrication A specially
formulated, high temperature, polyurea based grease is used to
provide more than four times the lubrication life of other
greases.
High Efciency
General Purpose Motors Severe Duty Motors
Performance Specications 1 to 200 HP 1.15 service factor, 40C
ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 208-230/460 and
575 volt operation (143T 256T) 3-phase, 60 Hz; 230/460 volt
operation under 100 HP, 460 volt 100 HP and above, 575 volt
available (284T 449T) Meet or exceed EPAct efciency standards Class
F insulation, Class B temperature rise NEMA design B, continuous
duty 143T 449T frame
Hazardous Duty Motors
Oversized Conduit Box Larger than industry standards,
diagonallysplit, gasketed and rotatable in 90 increments for quick
and easy connections. Leads are non-wicking and are clearly and
permanently marked. Aluminum construction for frames 143T to 256T,
steel for frames 284T to 405T and cast iron for 444T frames and
larger. Corrosion Resistance Cast iron construction, zinc-plated
hardware, epoxy enamel paint and aluminum nameplate resist rust and
corrosion. Modiable & Custom Siemens motors are available with
a wide variety of QuikMOD modications or custom designs to meet
your specic motor needs.
Inverter Duty Motors Denite Purpose Motors
Features for Long LifeFrame & Bearing Housings Cast iron
construction for exceptional structural integrity & corrosion
resistance, equipped with integrally cast feet. Condensation drain
holes (143T-256T frames) or condensation T-drains (284T-449T
frames) are provided. Lifting eyebolts are included with motors
> 75 lbs. Rotor A unique rotor bar design provides improved
efciency. Large cross section bars and end rings reduce resistance
for lower rotor losses. Each die cast aluminum rotor assembly is
dynamically balanced for extended bearing life, and includes a high
strength carbon steel (C1045) shaft for maximum rotor
performance.
IEC Metric Motors QuikMOD Detail Custom Options Detail Typical
Performance Data
Specications table begins on the next page
Dimensions Part Number Index
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
2-7
Introduction
General Purpose - TEFC MotorsGP10 - (Cast Iron Frame)HP RPM
Frame Voltage Type DE Bearing Part Number List Price $
General Purpose Motors
High EfciencyMult. FL FL Nom. Sym. Amps* Eff. (%) Weight Stock
(lbs) Model
Horizontal, Foot Mounted 1 3600 3600 1800 1800 1200 1200 900 900
3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200
900 900 3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800
1200 1200 900 900 143T 143T 143T 143T 145T 145T 182T 182T 143T 143T
145T 145T 182T 182T 184T 184T 145T 145T 145T 145T 184T 184T 213T
213T 182T 182T 182T 182T 213T 213T 215T 215T 184T 184T 184T 184T
215T 215T 254T 254T 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball 1LE22011AA114AA3 1LE22011AA113AA3
1LE22011AB214AA3 1LE22011AB213AA3 1LE22011AC314AA3 1LE22011AC313AA3
1LE22011CD114AA3 1LE22011CD113AA3 1LE22011AA214AA3 1LE22011AA213AA3
1LE22011AB314AA3 1LE22011AB313AA3 1LE22011CC114AA3 1LE22011CC113AA3
1LE22011CD314AA3 1LE22011CD313AA3 1LE22011AA314AA3 1LE22011AA313AA3
1LE22011AB414AA3 1LE22011AB413AA3 1LE22011CC314AA3 1LE22011CC313AA3
1LE22012AD114AA3 1LE22012AD113AA3 1LE22011CA114AA3 1LE22011CA113AA3
1LE22011CB114AA3 1LE22011CB113AA3 1LE22012AC114AA3 1LE22012AC113AA3
1LE22012AD214AA3 1LE22012AD213AA3 1LE22011CA314AA3 1LE22011CA313AA3
1LE22011CB314AA3 1LE22011CB313AA3 1LE22012AC214AA3 1LE22012AC213AA3
1LE22012BD114AA3 1LE22012BD113AA3 315 315 315 315 392 392 614 614
323 323 347 347 419 419 666 666 376 376 377 377 463 463 766 766 419
419 433 433 595 595 1098 1098 546 546 494 494 888 888 1530 1530 GP1
GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 1.4 1.1 1.5 1.2 1.6 1.3 2.1 1.6 2.0 1.6 2.2 1.8
2.4 1.9 3.0 2.4 2.6 2.1 3.0 2.4 3.1 2.5 3.3 2.6 3.7 3.0 4.0 3.2 4.2
3.4 4.8 3.8 6.2 5.0 6.7 5.4 6.8 5.4 8.8 7.0 80.0 80.0 82.5 82.5
80.0 80.0 74.0 74.0 82.5 82.5 84.0 84.0 85.5 85.5 77.0 77.0 84.0
84.0 84.0 84.0 86.5 86.5 82.5 82.5 85.5 85.5 87.5 87.5 87.5 87.5
84.0 84.0 87.5 87.5 87.5 87.5 87.5 87.5 85.5 85.5 51 51 53 53 54 54
86 86 53 53 58 58 83 83 99 99 54 54 59 59 94 94 123 123 85 85 88 88
143 143 138 138 91 91 94 94 151 151 218 218
Severe Duty Motors
1 1 1 1 1
Hazardous Duty Motors
1 1 1.5 1.5 1.5
Inverter Duty Motors
1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 3 3
QuikMOD Detail
IEC Metric Motors
Denite Purpose Motors
3 3 3 3 3 3 5 5 5 5 5 5 5 5
Dimensions
Typical Performance Data Part Number Index
Custom Options Detail
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V Frames 280-440 available after
RGZP stock motors are depleted
2-8
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
DOE#CC032A
Introduction
General Purpose - TEFC MotorsGP10 - (Cast Iron Frame)HP 7.5 7.5
7.5 7.5 7.5 7.5 7.5 7.5 10 10 10 10 10 10 10 10 15 15 15 15 15 15
15 15 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 RPM 3600 3600
1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200 900 900
3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200
900 900 3600 3600 1800 1800 1200 1200 900 900 Frame 213T 213T 213T
213T 254T 254T 256T 256T 215T 215T 215T 215T 256T 256T 284T 284T
254T 254T 254T 254T 284T 284T 286T 286T 256T 256T 256T 256T 286T
286T 324T 324T 284TS 284TS 284T 284T 324T 324T 326T 326T Voltage
208-230/460 575 208-230/460 575 208-230/460 575 208-230/460 575
208-230/460 575 208-230/460 575 208-230/460 575 230/460 575
208-230/460 575 208-230/460 575 230/460 575 230/460 575 208-230/460
575 208-230/460 575 230/460 575 230/460 575 230/460 575 230/460 575
230/460 575 230/460 575 Type GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 DE Bearing Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Part Number
1LE22012AA114AA3 1LE22012AA113AA3 1LE22012AB114AA3 1LE22012AB113AA3
1LE22012BC114AA3 1LE22012BC113AA3 1LE22012BD214AA3 1LE22012BD213AA3
1LE22012AA214AA3 1LE22012AA213AA3 1LE22012AB214AA3 1LE22012AB213AA3
1LE22012BC214AA3 1LE22012BC213AA3 1LE22012CD116AA3 1LE22012CD113AA3
1LE22012BA114AA3 1LE22012BA113AA3 1LE22012BB114AA3 1LE22012BB113AA3
1LE22012CC116AA3 1LE22012CC113AA3 1LE22012CD216AA3 1LE22012CD213AA3
1LE22012BA214AA3 1LE22012BA213AA3 1LE22012BB214AA3 1LE22012BB213AA3
1LE22012CC216AA3 1LE22012CC213AA3 1LE22013AD116AA3 1LE22013AD113AA3
1LE22012DA116AA3 1LE22012DA113AA3 1LE22012CB116AA3 1LE22012CB113AA3
1LE22013AC116AA3 1LE22013AC113AA3 1LE22013AD216AA3 1LE22013AD213AA3
List Price $ 713 713 691 691 1134 1134 1597 1597 841 841 841 841
1334 1334 2311 2311 1099 1099 1073 1073 1925 1925 2746 2746 1360
1360 1292 1292 2303 2303 3297 3297 1751 1751 1671 1671 2760 2760
3789 3789
High EfciencyMult. FL FL Nom. Sym. Amps* Eff. (%) GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1
GP1 GP1 GP1 9.0 7.2 9.5 7.6 10.5 8.4 13.0 10.4 11.5 9.2 12.5 10.0
13.5 10.8 12.0 9.6 18.0 14.4 19.0 15.2 20.0 16.0 23.0 18.4 23.5
18.8 25.0 20.0 26.0 20.8 31.0 24.8 29.0 23.2 29.0 23.2 33.0 26.4
38.0 30.4 88.5 88.5 89.5 89.5 89.5 89.5 85.5 85.5 89.5 89.5 89.5
89.5 89.5 89.5 91.0 91.0 90.2 90.2 91.0 91.0 90.2 90.2 91.0 91.0
90.2 90.2 91.0 91.0 90.2 90.2 91.0 91.0 91.0 91.0 92.4 92.4 91.7
91.7 90.2 90.2 Weight Stock (lbs) Model 137 137 143 143 224 224 250
250 150 150 151 151 236 236 375 375 228 228 227 227 375 375 430 430
241 241 246 246 430 430 567 567 375 375 390 375 565 565 600 600
General Purpose Motors
Horizontal, Foot Mounted - continued
Severe Duty Motors Hazardous Duty Motors Inverter Duty Motors
Denite Purpose Motors IEC Metric Motors QuikMOD Detail Custom
Options Detail Typical Performance Data
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V Frames 280-440 available after
RGZP stock motors are depleted
Dimensions Part Number Index
DOE#CC032A
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
2-9
Introduction
General Purpose - TEFC MotorsGP10 - (Cast Iron Frame)HP 30 RPM
3600 3600 1800 1800 1200 1200 900 900 3600 3600 1800 1800 1200 1200
900 900 3600 3600 1800 1800 1200 1200 3600 3600 1800 1800 1200 1200
3600 3600 1800 1800 1200 1200 Frame 286TS 286TS 286T 286T 326T 326T
364T 364T 324TS 324TS 324T 324T 364T 364T 365T 365T 326TS 326TS
326T 326T 365T 365T 364TS 364TS 364T 364T 404T 404T 365TS 365TS
365T 365T 405T 405T 405TS 405TS 405T 405TS 405T 444T 444TS 444T
Voltage 230/460 575 230/460 575 230/460 575 230/460 575 230/460 575
230/460 575 230/460 575 230/460 575 230/460 575 230/460 575 230/460
575 230/460 575 230/460 575 230/460 575 230/460 575 230/460 575
230/460 575 460 575 460 460 575 460 460 575 Type GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 DE
Bearing Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball
Ball Roller Ball Roller Part Number 1LE22012DA216AA3
1LE22012DA213AA3 1LE22012CB216AA3 1LE22012CB213AA3 1LE22013AC216AA3
1LE22013AC213AA3 1LE22013CD116AA3 1LE22013CD113AA3 1LE22013BA116AA3
1LE22013BA113AA3 1LE22013AB116AA3 1LE22013AB113AA3 1LE22013CC116AA3
1LE22013CC113AA3 1LE22013CD216AA3 1LE22013CD213AA3 1LE22013BA216AA3
1LE22013BA213AA3 1LE22013AB216AA3 1LE22013AB213AA3 1LE22013CC216AA3
1LE22013CC213AA3 1LE22013DA116AA3 1LE22013DA113AA3 1LE22013CB116AA3
1LE22013CB113AA3 1LE22014AC116AA3 1LE22014AC113AA3 1LE22013DA216AA3
1LE22013DA213AA3 1LE22013CB216AA3 1LE22013CB213AA3 1LE22014AC216AA3
1LE22014AC213AA3 1LE22014BA212AA3 1LE22014BA213AA3 1LE22014AB212AA3
1LE22014BB212AA3 1LE22014AB213AA3 1LE22014CC112AA3 1LE22014DC112AA3
1LE22014CC113AA3 List Price $ 2071 2071 1970 1970 3450 3450 4866
4866 2684 2684 2593 2593 4568 4568 5749 5749 3405 3405 3182 3182
5317 5317 4759 4704 4767 4767 6332 6332 5924 5924 6109 6109 7489
7489 7917 7917 7483 7483 7483 10293 10293 10293
General Purpose Motors
High EfciencyMult. FL FL Nom. Sym. Amps* Eff. (%) GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1 GP1
GP1 GP1 GP1 GP1 GP1 34.0 27.2 35.0 28.0 39.0 31.2 47.0 37.6 46.0
36.8 47.0 37.6 52.0 41.6 63.0 50.4 55.0 44.0 58.0 46.4 66.0 52.8
68.0 54.4 71.0 56.8 74.0 59.2 85.0 68.0 87.0 69.6 93.0 74.4 112.0
89.6 114.0 114.0 91.2 117.0 117.0 93.6 91.0 91.0 92.4 92.4 91.7
91.7 91.0 91.0 91.7 91.7 93.0 93.0 93.0 93.0 91.7 91.7 92.4 92.4
93.0 93.0 93.0 93.0 93.0 93.0 93.6 93.6 93.6 93.6 93.0 93.0 94.1
94.1 93.6 93.6 93.6 93.6 94.5 94.5 94.5 94.1 94.1 94.1 Weight Stock
(lbs) Model 430 430 408 407 600 600 800 800 537 537 542 542 800 800
875 875 580 580 600 600 875 875 709 709 720 800 1135 1135 875 875
875 875 1300 1300 1300 1300 1300 1300 1300 1625 1625 1625
Horizontal, Foot Mounted - continued 30 30 30 30 30 30 30 40 40
40 40 40 40 40 40 50 50 50 50 50 50 60 60 60 60
QuikMOD Detail
IEC Metric Motors
Denite Purpose Motors
Inverter Duty Motors
Hazardous Duty Motors
Severe Duty Motors
60 60 75 75 75 75 75 75
Custom Options Detail
100 3600 100 3600 100 1800 100 1800 100 1800 100 1200 100 1200
100 1200
Dimensions
Typical Performance Data Part Number Index
Prices and specications are subject to change without notice
Stock availability subject to sale QuikMOD delivery for stocked
motors only *FL Amps at 460V or 575V Frames 280-440 available after
RGZP stock motors are depleted
2-10
2009-2010 Low Voltage AC Motors Selection and Pricing Guide
DOE#CC032A
Introduction
General Purpose - TEFC MotorsGP10 - (Cast Iron Frame)HP RPM
Frame 444TS 444TS 444T B444T 444TS 444T B444T 444TS 445T B445T
445TS 445T B445T 445TS 445TS 445TS 445T B445T 445TS 445T B445T
445TS 447T B447T 447TS 447T B447T 447TS 447TS 447TS 447T B447T
447TS 447T B447T 447TS 449T B449T 449TS 449T B449T 449TS Voltage
460 575 460 460 460 575 575 575 460 460 460 575 575 575 460 575 460
460 460 575 575 575 460 460 460 575 575 575 460 575 460 460 460 575
575 575 460 460 460 575 575 575 Type GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 DE Bearing Ball
Ball Roller Ball Ball Roller Ball Ball Roller Ball Ball Roller Ball
Ball Ball Ball R