Data subject to change without notice. 324 Included 12 GA inner panel Brushed 14 GA type 304 stainless steel Seams are continuously welded and ground smooth Large drip shield protects contents and adds rigidity Anti-vibration flange nuts Ground strap with anti-vibration hard- ware is included Seamless poured in place gasket Large door bend adds rigidity Quarter turn lock allows easy access Included door rails increase rigidity and add mounting capability Aesthetic and con- venient heavy duty die cast hinges allow 180° opening Ball bearing hinge pins are easily removed The 5412 ESS - 98 stock sizes available Panel depth adjusters included Double bent panel increases rigidity NEMA 4-4X ENCLOSURES 5412 ESS Water, oil & dust tight stainless steel enclosures The 5412 ESS water, oil & dust tight enclosures are used indoors or outdoors in areas where a cor- rosion problem exists or where the enclosures may be subject to hosing or to water coming from any direction or for protection against dust, dirt or oil splashing. The 5412 ESS are made from quality 14 GA or 16 GA (Type 304) stainless steel, with corner seems continuously welded. The opening has a curled lip around all sides to prevent dripping water from entering the enclosure when the door is open, it also increases rigidity. A high quality robotically poured-in-place seamless gasket ensures a complete and durable water tight seal. The pins of the concealed hinges can be pulled out to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclo- sures) ensures positive closing. Internal mounting holes are pro- vided. Each enclosure comes complete with a 12 GA inner panel which is double bent* for maximum rigidity and which mounts on M8 welded studs. The enclosures’ exterior are unpaint- ed and brushed smooth. The enclosures’ interior and panels are finished with white heat fused polyester powder, electrostatical- ly applied on a pretreaded base. CSA Certified / UL Listed NEMA/EEMAC 4X / IP66 White powder coated interior p.442 p.441 p.442 p.442 p.449 p.449 p.452 http://www.exmweb.com 1-800-363-2423 Fax : 450-979-4626 [email protected]www.industrialcontroldirect.com Tel: 817-375-0023 Fax: 817-549-0249 [email protected]
4
Embed
NEMA 4-4X ENCLOSURES 5412 ESS5412 ESS723024 72 30 24 70 28 300 NEMA 4-4X ENCLOSURES 5412 ESS † Add suffix ‘6’ to the catalog number for 316 stain-less steel. ex. 5412 ESS4230086
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Data subject to change without
notice.
324
Included 12 GAinner panel
Brushed 14GA type 304stainless steel
Seams arecontinuouslywelded andground smooth
Large drip shieldprotects contentsand adds rigidity
Anti-vibrationflange nuts
Ground strap withanti-vibration hard-ware is included
Seamless pouredin place gasket
Large doorbend addsrigidity
Quarter turn lockallows easy access
Included door railsincrease rigidityand add mountingcapability
Aesthetic and con-venient heavy dutydie cast hingesallow 180° opening
Ball bearinghinge pins areeasily removed
The 5412 ESS - 98 stock sizes available
Panel depthadjusters included Double bent panel
increases rigidity
NEMA 4-4X ENCLOSURES 5412 ESS
Water, oil & dust tight stainless steel enclosuresThe 5412 ESS water, oil & dusttight enclosures are used indoorsor outdoors in areas where a cor-rosion problem exists or wherethe enclosures may be subject tohosing or to water coming fromany direction or for protectionagainst dust, dirt or oil splashing.The 5412 ESS are made fromquality 14 GA or 16 GA (Type304) stainless steel, with cornerseems continuously welded. Theopening has a curled lip aroundall sides to prevent dripping water
from entering the enclosure whenthe door is open, it also increasesrigidity. A high quality roboticallypoured-in-place seamless gasketensures a complete and durablewater tight seal. The pins of theconcealed hinges can be pulledout to remove the door. A ¼ turnlocking mechanism (or 3 pointlatch system on larger enclo-sures) ensures positive closing.Internal mounting holes are pro-vided. Each enclosure comescomplete with a 12 GA inner
panel which is double bent* formaximum rigidity and whichmounts on M8 welded studs. Theenclosures’ exterior are unpaint-ed and brushed smooth. Theenclosures’ interior and panelsare finished with white heat fusedpolyester powder, electrostatical-ly applied on a pretreaded base. CSA Certified / UL ListedNEMA/EEMAC 4X / IP66