This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2
E Se
ries
Padl
ock
NE
Serie
s Pa
dloc
k
2
10
1
7
3
8
12
4
5
11
9
6
NE Series Padlock
No. Part Part number No. Part Part number
1 Padlock body 10 - 2850014112 - 2850016114 - 28500181
Service InstructionsDisassembly - NE10L, 12L, 14L; NE10H, 12H, 14H
7
3 4
3
•Use standard M3 screw to remove the threaded plug (4). Note:Forconvenienceremoval/insertionofthethreadedpluguselongscrew(15-20mm).Screwonlyfewturnsandpullitout.
4
M3 Screw
5
E Se
ries
Padl
ock
NE
Serie
s Pa
dloc
k
•Take out cylinder (11) and cylinder holder (8).•Remove activator cam (5) and the two steel balls (9).
5
4
9
•Removecylinder(11)fromcylinderholder(8).•Remove shutter (10) and spring (12).
•Remove shackle (2) and shackle adaptor (3).
5
11
8
6
2
811
10
12
3
6
E Se
ries
Padl
ock
NE
Serie
s Pa
dloc
k
•Insert two steel balls (9).•Insert activator cam (5) as described in diagram 5A.Note:Activatorcam(5)isnotsymmetrical.
5
2
9
•Assemble shutter (10) and spring (12) in cylinder holder (8).•Insert cylinder (11).
•Insert shackle adaptor (3) and shackle (2) into padlock body as illustrated.
3
11
8
1
2
Service InstructionsAssembly - NE10L, 12L, 14L; NE10H, 12H, 14H
10
12
3
5A
Smaller groove toward the longerlegoftheshackle
7
E Se
ries
Padl
ock
NE
Serie
s Pa
dloc
k•Lockthepadlockandremoveoperatingkey.•Useflatscrewdrivertoscrewslotted head screw (7).•Assemble bumper (6).
6
6
7
•Lifttheshackle(2)andshackleadaptor(3)untilthreadedplugholeisnotblocked.•Push threaded plug (4) all the way in as illustrated. Remove the M3 screw.Note:Forconvenienceremoval/insertionofthethreadedpluguselongscrew (min.15-20mm).Screwonlyfewturns.
•Inserttheactivator(10).•Insert the cylinder (9) together with the cylinder holder (8). •Verifyengagementoftheactivatorwiththelatch.Note:Placereinforcementplate(11)asillustrated.
9
8
1110
3
Reinforcementplatelocation
Assembly - SBNE12
21
E Se
ries
Padl
ock
NE
Serie
s Pa
dloc
k
•Insert pin (5), spring (4) and stopper pins (3).•Press and hold the stopper pins.•Whilepressinginsertoperatingkeyandverifyproperoperationofthelock.
3
4
4
•Mount the disassembling ring on the bolt (as illustrated).•While pressing the stopper pin push the bolt (7) in.•Verifyproperoperationofthelock.