General Specific Practical Operator Born in ZILLI BRUNO UDINE (UD) 22/11/1966 Form ASNT-CER-EE-10/02 on BRUNO ZILLI Employed by declared by the company to be in possession of the requirements requested by the Recommended Practice SNT-TC-1A ed. 2006 supplements and WRITTEN PRACTICE N 5/2012 the operator is qualified as follows: LATISANA (UD) Located in No. 15VE00448PO2 Level SECOND RADIOGRAPHIC Method This certificate consist of 1 pages Results of the examinations Type of examination Points Total Results using GILARDONI - VISORE equipment or similar deemed equivalent by the RINA surveyors. The qualification is relevant to the testing of semifinished products and their welds in C, C-Mn, low & high alloyed, stainless steel and light alloys. Near-vision acuity based on the Jaeger test level 1 and colour contrast, differentiation, and grey scale (when applicable) have been verified successfully. 100 93.54 96 33.33 31.18 97 NDT OPERATOR QUALIFICATION CERTIFICATE EMPLOYER RINA Services S.p.A. Via Corsica 12 - 16128 Genova 32 This certificate is valid from Issued at GENOVA 4 June 2015 to on 20 July 2015 4 June 2020
2
Embed
NDT OPERATOR QUALIFICATION CERTIFICATE …controllinondistruttivi.altervista.org/alterpages/files/RT2-SNT...Practice SNT-TC-1A ed. 2006 supplements and WRITTEN PRACTICE N 5/2012 the
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
General
Specific
Practical
Operator
Born in
ZILLI BRUNO
UDINE (UD) 22/11/1966
Form ASNT-CER-EE-10/02
on
BRUNO ZILLI Employed by
declared by the company to be in possession of the requirements requested by the RecommendedPractice SNT-TC-1A ed. 2006 supplements and WRITTEN PRACTICE N 5/2012 the operator is qualifiedas follows:
LATISANA (UD) Located in
No. 15VE00448PO2
Level SECOND RADIOGRAPHIC Method
This certificate consist of 1 pages
Results of the examinations
Type of examination Points TotalResults
using GILARDONI - VISORE equipment or similar deemed equivalent by the RINA surveyors.
The qualification is relevant to the testing of semifinished products and their welds in C, C-Mn, low & highalloyed, stainless steel and light alloys.
Near-vision acuity based on the Jaeger test level 1 and colour contrast, differentiation, and grey scale (when applicable) havebeen verified successfully.
dichiarato dalla Società di appartenenza in possesso dei requisiti richiesti dalla Recommended PraticeSNT-TC-1A ed. 2006 supplementi e WRITTEN PRACTICE N 5/2012 l'operatore è qualificato al:
LATISANA (UD) Con sede in
N. 15VE00448PO2
Livello SECONDO RADIOGRAFICO Metodo
Risultati degli esami
93.54
96
97
100 Generale
Specifico
Pratico
Tipo di esame Votazione Totale
31.18
33.33
Risultati
da eseguirsi con apparecchiatura GILARDONI - VISORE o altra ritenuta equivalente dai tecnici del RINA.
La qualifica è relativa al controllo di semilavorati e relative saldature in acciai al C, C-Mn, basso, alto legati,inossidabili e leghe leggere.
Le prove di idoneità visiva con Jaeger test e di sensibilità cromatica, compresa la discriminazione delle scale dei grigi(quando applicabile), hanno dato esito favorevole.
CERTIFICATO DI QUALIFICA DI OPERATORE PER CND
DATORE DI LAVORO RINA Services S.p.A.Via Corsica 12 - 16128 Genova