Yamada America, Inc. 955 E. Algonquin Road, Arlington Heights, IL 60005 USA Toll-Free: 800 990-7867 Phone: 847 631-9200 Fax: 847 631-9273 E-mail: [email protected]Web: yamadapump.com Port Dimensions (164 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar ® (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped 2" Female NPT) Stainless Steel (316) 2" ANSI B16.5 #150 or 2" Female NPT Cast Iron 2" Female NPT Air inlet (incl. ball valve): 3/4" Female NPT Air exhaust (incl. silencer): 1" Female NPT Maximum Liquid Temperature* Diaphragm Material Temperature Buna N 180°F (82°C) Neoprene 180°F (82°C) Santoprene® (TPO) 180°F (82°C) EPDM 212°F (100°C) PTFE 212°F (100°C) Hytrel® (TPEE) 248°F (120°C) Viton® fluoroelastomer 248°F (120°C) * The maximum liquid temperature for metal and Kynar ® - fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm mate- rial. Air Supply Pressure (All Models) 20 – 100 PSI (1.4 – 7 kfg/cm) Discharge Volume Per Cycle Rubber diaphragm: 1.12 gallons (4.25 liters) PTFE diaphragm: 0.69 gallons (2.61 liters) Maximum Cycles Per Minute Rubber diaphragm: 146 PTFE diaphragm: 220 Maximum Size Solid 5/16" (8 mm) Maximum Dry Suction Lift Rubber-fitted pump capability: 19-feet Air Motor Aluminum Air Motor–Standard Optional coating: PTFE grey coated (XP) Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings. Kynar® (PVDF) pumps fitted with Santoprene®, Hytrel®, or PTFE include PTFE check balls and o-rings. NDP-50 Specifications Model Number Nomenclature Note: For NPT-fitted Stainless Steel, add “NPT” at end of model number nomen- clature. Aluminum (top left) Dimensions: 17.68" W × 30.67" H Net Wt.: 88 lbs. (39.9 kg) Shipping Wt.: 99 lbs. Polypropylene or Kynar ® (top right) Dimensions: 18.63" W × 32.32" H Net Wt.: 84 lbs. (38.1 kg) Shipping Wt.: 108 lbs. Cast Iron or Stainless Steel (left) Dimensions: 17.72" W × 30.55" H Net Wt.: Cast Iron –159 lbs. (72.1 kg) SS –162 lbs. (73.5 kg) Shipping Wt.: Cast Iron –168 lbs. SS – 173 lbs. Note: ANSI Flange available for Cast Iron and Stainless Steel NDP-50 B x x Series: NDP-50 Pump Valve Type: B = Ball Body Material: P = Polypropylene A = Aluminum S = Stainless Steel F = Cast Iron V = Kynar® Diaphragm Material: C = Neoprene (CR) N = Buna N (NBR) E = Nordel™ (EPDM) S = Santoprene® (TPO) T = PTFE V = Viton® (FKM) H = Hytrel® (TPE)
10
Embed
ndp-50 web data sheet 08 NDP-50 data sheet · Cast Iron–159 lbs. (72.1 kg) SS –162 lbs. (73.5 kg) Shipping Wt.: Cast Iron–168 lbs. SS –173 lbs. Note: ANSI Flange available
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Yamada America, Inc. 955 E. Algonquin Road, Arlington Heights, IL 60005USA Toll-Free: 800 990-7867 Phone: 847 631-9200 Fax: 847 631-9273 E-mail: [email protected] Web: yamadapump.com
Buna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)EPDM 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)* The maximum liquid temperature for metal and Kynar®-fitted pumps is determined by the elastomer (diaphragmmaterial). Polypropylene pumps have a maximum liquidtemperature of 180°F (82°C) regardless of diaphragm mate-rial.
Aluminum Air Motor–StandardOptional coating: PTFE grey coated (XP)
Notes: Hytrel® fitted pumps include Buna N wetted o-rings.Santoprene® fitted pumps include EPDM wetted o-rings. Kynar®(PVDF) pumps fitted with Santoprene®, Hytrel®, or PTFE include PTFEcheck balls and o-rings.
NDP-50 Specifications
Model Number Nomenclature
Note: For NPT-fitted StainlessSteel, add “NPT” at end of model number nomen-clature.