National Reports May 2010 Quality Knowledge Exchange Network.

National Reports May 2010

Quality Knowledge Exchange Network

Page 2

14 National reports

Page 3Page 3

Status

Hungary

Developing a 24 hours service of cadastral information via internet for public access, in the frame of „Electronic Government Operational Program 1.1.3” EU project

Updating management documentations by

changing the related standards.

The integrated management system

surveillance audit by the Certification Board

based ISO 9001 & ISO 27001 Standards.

Czech Republic: Possibilities of presentation for quality of lines of cadastral boundaries were discussed. How to present positional accuracy of measured points

Greece: B’ Phase of Cadastral Survey Programs:Six (6) contracts have been undertaken and are running since November 2009. Quality Control on the Quality Assurance Reports (QARs) for all contracts has been completed.Quality Control procedures concerning the completeness of scanned documents (scanned legal titles and deeds) are undergoing.The Quality Plan of the Cadastral Survey Program is under revision.KTIMATOLOGIO S.A. has submitted proposals to be funded by the National Strategic Reference Framework (NSRF 2007-2013) for two (2) projects concerning the development of services for data transposition to INSPIRE and the design of a new Information System / NSDI for environmental protection (including environmental data of INSPIRE Annex II and III).

GB: Draft new agency performance monitors have been put on holdMost effort is being spent on ensuring that quality will be maintained in the new seamless environment.Accreditation of the new environment is seen as key

Page 4Page 4

Status

Ireland: Document Portal Development ~wiki style, Data Quality Improvement Programme ~Phase 2, Extension to responsibilities of OSi DQMS, INSPIRE MetaData December Milestone

Lithuania: Quality control of LIDAR project data (Digital Surface Model and orthophoto maps) for territory of Lithuania, Improvement of Quality management system (ISO 9001:2008, ISO 9004:2009)

Malta: Reviewing quality measures and statements of large-scale topographic products for publication in discovery services.

Norway: In progress: Harmonize the conceptual data model and the implemented data model for the national cadastre system. Make clear routines for updating this two models.Make sure that the concepts used in different special field is harmonized.More requirements that are possible to express in the conceptual model

Poland: Extension of Geoportal project -

development of services quality monitoring

tools

Spain:ICC: ISO 9001:2008 QMS scope extension to ICC 25K Topographic DB. Preparing also future inclusion of ICC 5K Orthophoto series Scale dependent methodology for quality control to accept cartography into the Catalan Cartographic Registry has been stablished Starting implementation of ITIL Methodology (ITIL ~ ISO 20000)IGN: ISO 9000 certification at Test Paper Laboratory ISO 9000 certification at Printing Division in progress CNIG is preparing for certification activities, IGN strategic project to implement EFQM

Sweden: Strategic plan for quality development for the database of property. Quality awareness in the project in the collection data for a new elevation model

Page 5

General informationAustria: Real-time service for GIS-grid-transformation in position and height (between ETRS89 and MGI) has been implemented. The tender for the creation of “digital photo imagery and ortho-photos” 2010 (Area: 1/3 of Austria) has been accepted. The Project for the Conception, Implementation and Maintenance of the INSPIRE-MD-Server has started.

Czech Republic: New COSMC Geoportal is prepared to be launched, Registries implementation started successfully

GB: New seamless environment still on track for Autumn 2010New HQ building also on track for late 2010 (see next slide)Government has announced that some OS data will be made available with no charge

Malta: MEPA no longer receiving government fundingMEPA reform underway, some functions of the organisation are being assumed by other government agenciesNorway: New section for Quality management represent the whole NMCA. New section for “pass on” data

Poland: New bidding for harmonisation of national datasets with INSPIRE data specificationSpainICC: Developing a methodology to test conformance of ICC Web Services to INSPIRE NS requirements (discovery and view services), IGN: Strategic Plan (2006-2010) second phase

Sweden: National coordination responsibility for

geodata and the Geoportal management

Lithuania: Participation in Geoland2 (Operational GMES Land Monitoring Core service) project (consortium). Participation in NatureSDIplus project (eContentplus Programme). Participation in HLANDATA (Creation of value – added services based on Harmonized Land Use and Land Cover Datasets) project (consortium). Participation in “Implementation of on Initial GMES service for Geospatial Reference Data Access” (subcontractor) Changing of geodetic and cartographic law in Lithuania

Ireland: 3D City Model of Dublin~ LOD 3/5. New Data Model~ Prototype Delivered mid March

Hungary: Reorganisation of FÖMI still in progress. Reduction of number of departments. Changeover some job among sections.

Page 6Page 6

Proposal for topic at next webinar

•Quality evaluation procedures (Czech, Sweden)

•Should be something to do with the actual measurement of quality. Lets see it in action (GB)

•How NMCAs are managing quality in metadata (Greece)

•Quality evaluation Web Services (Ireland)

•Quality about Web Services (IGN, Spain)

•How present quality information in Metadata (Malta)

•Same topic, other NMCA (Norway)

•Description and utilization of quality elements in data specification (Poland)

•How to measure quality of INSPIRE services (Poland)

•Compliancy of Organizations’ Network Services to INSPIRE (ICC, Spain)

•QM split at NMAs into INSPIRE themes (IGN, Spain)

Page 7Page 7

Proposals for DTM presentations at next plenary

• ZABAGED 3D relief model in DGN, GRID 10x10km - pos. accuracy 1-3m (Czech)

• Laser scanning for precision DTM creation started (Czech)

• Possibly. We have just started evaluating the quality of a new dataset (GB)

• EuroDEM as a mosaic of EuroGeographics members' national elevation data, and

national tasks (Germany)

• Quality control of DTM creation (2005-2006, 2008, 2009-2010)(Lithuania)

• Carried out positional accuracy measures of DEM (Malta)

• LIDAR data quality controls at ICC (data suited for DTM QC) (ICC, Spain)

• Relative accuracy comparing DEM with Aerial Triangulation tie points (IGN, Spain)

• Absolute accuracy comparing DEM with kinematic GPS points (IGN, Spain)

• We are planning to use LIDAR (IGN, Spain)

• Quality awareness in the project with a new elevation model (Sweden)

Page 8Page 8

Proposal for presentations at next plenary

•The integrated management system surveillance audit by the Certification Board based ISO 9001 & ISO 27001 Standards (Hungary)

•Document Portal Development ~wiki style (Ireland)

•Reviewing quality measures and statements of large-scale topographic products for publication in discovery services (Malta)

•Starting implementation of ITIL Methodology (ITIL ~ ISO 20000) (ICC, Spain)

•ISO 9000 certification at Test Paper Laboratory ISO 9000 certification at Printing Division in progress (IGN, Spain)

Page 9

• General information about Organisation

• Real-time service for GIS-grid-transformation in position and height

(between ETRS89 and MGI) has been implemented.

• The tender for the creation of “digital photo imagery and ortho-

photos” 2010 (Area: 1/3 of Austria) has been accepted.

• The Project for the Conception, Implementation and Maintenance of

the INSPIRE-MD-Server has started.

BEV, AustriaFrom November 2009 to May 2010

Page 10Page 10

• Data Quality and Quality management• Possibilities of presentation for quality of lines of cadastral

boundaries were discussed

• How to present positional accuracy of measured points?

• General information about Organisation• New COSMC Geoportal is prepared to be launched

• Registries implementation started successfully

• Topic for next webinar• Quality evaluation procedures

• DTM at plenary meeting in France• ZABAGED 3D relief model in DGN, GRID 10x10km - pos. accuracy 1-3m

• Laser scanning for precision DTM creation started

COSMC, Czech RepublicFrom December 2009 to April 2010

Page 11Page 11

• Data Quality and Quality management

---

• General information about Organisation

---

• Topic for next webinar

---

• DTM at plenary meeting in France

• BKG took the responsibility to produce EuroDEM as a mosaic of

EuroGeographics members' national elevation data. I can ask the responsible

colleague to give a presentation about this work and this national tasks, too.

BKG, GermanyBrussels meeting May 2010

Page 12

• Data Quality and Quality management• Draft new agency performance monitors have been put on hold

• Most effort is being spent on ensuring that quality will be maintained in the new seamless environment.

• Accreditation of the new environment is seen as key

• General information about Organisation• New seamless environment still on track for Autumn 2010

• New HQ building also on track for late 2010 (see next slide)

• Government has announced that some OS data will be made available with no charge

• Topic for next webinar• Should be something to do with the actual measurement of quality. Lets see it

in action

• DTM at plenary meeting in France• Possibly. We have just started evaluating the quality of a new dataset

Ordnance Survey GBFrom Nov 2009 to April 2010

Page 13

KTIMATOLOGIO S.A (Hellenic Cadastre) / GREECE

From December 2009 to April 2010

• Data Quality

B’ Phase of Cadastral Survey Programs:

Six (6) contracts have been undertaken and are running since November 2009.

o Quality Control on the Quality Assurance Reports (QARs) for all contracts has been completed.

o Quality Control procedures concerning the completeness of scanned documents (scanned legal titles and deeds) are undergoing.

o The Quality Plan of the Cadastral Survey Program is under revision.

• Quality Management

o New procedures are drafted in order to be embedded into the Handbook of Cadastral Survey Contract

Management and Supervision on behalf of the Department of Projects.

• General information about Organisation

o KTIMATOLOGIO S.A. has submitted proposals to be funded by the National Strategic Reference Framework

(NSRF 2007-2013) for two (2) projects concerning the development of services for data transposition to INSPIRE

and the design of a new Information System / NSDI for environmental protection (including environmental data

of INSPIRE Annex II and III).

• Topic for next webinaro How NMCAs are managing quality in metadata.

• DTM at plenary meeting in Franceo No advances to be presented concerning the Quality of DTMs.

Page 14

FÖMI, Hungary From November 2009 to April 2010

• Data Quality and Quality Management• Developing a 24 hours service of cadastral information via internet for public access, in the

frame of „Electronic Government Operational Program 1.1.3” EU project • Updating management documentations by changing the related standards.• The integrated management system surveillance audit by the Certification Board based

ISO 9001 & ISO 27001 Standards.

• General information about Organisation• Reorganisation of FÖMI still in progress. Reduction of number of departments. Changeover

some job among sections.

• Topic for next webinar• No suggestion at this time

• DTM at plenary meeting in France• Nothing to report

Page 15

• Data Quality and Quality management

• Document Portal Development ~wiki style

• Data Quality Improvement Programme ~Phase 2

• Extension to responsibilities of OSi DQMS

• INSPIRE MetaData December Milestone

• General information about Organisation

• 3D City Model of Dublin~ LOD 3/5

• New Data Model~ Prototype Delivered mid March

• Topic for next webinar

• Quality evaluation Web Services

• DTM at plenary meeting in France

• This is a work in progress so we are very interested!

Ordnance Survey, Ireland, Ireland From January 2010 to May 2010

Page 16

• Data Quality and Quality management• Quality control of LIDAR project data (Digital Surface Model and orthophoto maps) for

territory of Lithuania

• Improvement of Quality management system (ISO 9001:2008, ISO 9004:2009)

• General information about Organisation• Participation in Geoland2 (Operational GMES Land Monitoring Core service) project

(consortium)

• Participation in NatureSDIplus project (eContentplus Programme)

• Participation in HLANDATA (Creation of value – added services based on Harmonized Land Use and Land Cover Datasets) project (consortium)

• Participation in “Implementation of on Initial GMES service for Geospatial Reference Data Access” (subcontractor)

• Changing of geodetic and cartographic law in Lithuania

• Topic for next webinar• no ideas ;)

• DTM at plenary meeting in France• Quality control of DTM creation (2005-2006, 2008, 2009-2010)

Institute of Aerial Geodesy, LithuaniaFrom November 2009 to May 2010

Page 17

• Data Quality and Quality management

• Reviewing quality measures and statements of large-scale

topographic products for publication in discovery services.

• General information about Organisation

• MEPA no longer receiving government funding

• MEPA reform underway, some functions of the organisation are being

assumed by other government agencies

• Topic for next webinar

• How present quality information in Metadata

• DTM at plenary meeting in France

• Carried out positional accuracy measures of DEM

MEPA, MaltaFrom December 2009 to May 2010

Page 18

• Data Quality and Quality management• In progress: Harmonize the conceptual data model and the implemented

data model for the national cadastre system. Make clear routines for updating this two models.Make sure that the concepts used in different special field is harmonized.More requirements that are possible to express in the conceptual model

• General information about Organisation• New section for Quality management represent the whole NMCA.

• New section for “pass on” data

• Topic for next webinar • Same topic, other NMCA

• DTM at plenary meeting in France

Norwegian Mapping AuthorityNorwayFrom November 2009 – To April 2010

Page 19

• Data Quality and Quality management

• Extension of Geoportal project - development of services quality

monitoring tools

• General information about Organisation

• New bidding for harmonisation of national datasets with INSPIRE data

specification

• Topic for next webinar

• Description and utilization of quality elements in data specification

• How to measure quality of INSPIRE services?

• DTM at plenary meeting in France

•

Head Office of Geodesy and Cartography, PLFrom December 2009 to May 2010

Page 20Page 20

• Data Quality and Quality management• ISO 9001:2008 QMS scope extension to ICC 25K Topographic DB.

Preparing also future inclusion of ICC 5K Orthophoto series

• Scale dependent methodology for quality control to accept cartography into the Catalan Cartographic Registry has been stablished

• Starting implementation of ITIL Methodology (ITIL ~ ISO 20000)

• General information about Organisation• Developing a methodology to test conformance of ICC Web Services to

INSPIRE NS requirements (discovery and view services), so...

• Topic for next webinar• Compliancy of Organizations’ Network Services to INSPIRE

• DTM at plenary meeting in France• LIDAR data quality controls at ICC (data suited for DTM QC)

ICC, Catalonia - SpainFrom December 2009 to April 2010

Page 21

• Data Quality and Quality management• ISO 9000 certification at Test Paper Laboratory • ISO 9000 certification at Printing Division in progress • CNIG is preparing for certification activities• IGN strategic project to implement EFQM

• General information about Organisation• IGN Strategic Plan (2006-2010) second phase

• Topic for next webinar• QM split at NMAs into INSPIRE themes• Quality about Web Services

• DTM at plenary meeting in France• Relative accuracy comparing DEM with Aerial Triangulation tie points • Absolute accuracy comparing DEM with kinematic GPS points• We are planning to use LIDAR in near future but we don’t have any

methodology yet.

IGN, SpainFrom December 2009 to May 2010

Page 22

• Data Quality and Quality management

• Strategic plan for quality development for the database of property

• Quality awareness in the project in the collection data for a new

elevation model

• General information about Organisation

• National coordination responsibility for geodata and the Geoportal

management

• Topic for next webinar

• Quality evaluation procedures

• DTM at plenary meeting in France

• Quality awareness in the project with a new elevation model

Lantmäteriet, SwedenFrom December 2009 to May 2010